diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath6kl/sdio.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath6kl/sdio.c | 660 |
1 files changed, 545 insertions, 115 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c index 066d4f88807..9475e2d0d0b 100644 --- a/drivers/net/wireless/ath/ath6kl/sdio.c +++ b/drivers/net/wireless/ath/ath6kl/sdio.c @@ -22,7 +22,7 @@ #include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio.h> #include <linux/mmc/sd.h> -#include "htc_hif.h" +#include "hif.h" #include "hif-ops.h" #include "target.h" #include "debug.h" @@ -40,12 +40,18 @@ struct ath6kl_sdio { struct bus_request bus_req[BUS_REQUEST_MAX_NUM]; struct ath6kl *ar; + u8 *dma_buffer; + /* protects access to dma_buffer */ + struct mutex dma_buffer_mutex; + /* scatter request list head */ struct list_head scat_req; spinlock_t scat_lock; + bool scatter_enabled; + bool is_disabled; atomic_t irq_handling; const struct sdio_device_id *id; @@ -135,6 +141,8 @@ static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr, { int ret = 0; + sdio_claim_host(func); + if (request & HIF_WRITE) { /* FIXME: looks like ugly workaround for something */ if (addr >= HIF_MBOX_BASE_ADDR && @@ -156,6 +164,8 @@ static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr, ret = sdio_memcpy_fromio(func, buf, addr, len); } + sdio_release_host(func); + ath6kl_dbg(ATH6KL_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n", request & HIF_WRITE ? "wr" : "rd", addr, request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len); @@ -167,12 +177,11 @@ static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr, static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio) { struct bus_request *bus_req; - unsigned long flag; - spin_lock_irqsave(&ar_sdio->lock, flag); + spin_lock_bh(&ar_sdio->lock); if (list_empty(&ar_sdio->bus_req_freeq)) { - spin_unlock_irqrestore(&ar_sdio->lock, flag); + spin_unlock_bh(&ar_sdio->lock); return NULL; } @@ -180,7 +189,7 @@ static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio) struct bus_request, list); list_del(&bus_req->list); - spin_unlock_irqrestore(&ar_sdio->lock, flag); + spin_unlock_bh(&ar_sdio->lock); ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n", __func__, bus_req); @@ -190,14 +199,12 @@ static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio) static void ath6kl_sdio_free_bus_req(struct ath6kl_sdio *ar_sdio, struct bus_request *bus_req) { - unsigned long flag; - ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n", __func__, bus_req); - spin_lock_irqsave(&ar_sdio->lock, flag); + spin_lock_bh(&ar_sdio->lock); list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq); - spin_unlock_irqrestore(&ar_sdio->lock, flag); + spin_unlock_bh(&ar_sdio->lock); } static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req, @@ -291,10 +298,14 @@ static int ath6kl_sdio_scat_rw(struct ath6kl_sdio *ar_sdio, mmc_req.cmd = &cmd; mmc_req.data = &data; + sdio_claim_host(ar_sdio->func); + mmc_set_data_timeout(&data, ar_sdio->func->card); /* synchronous call to process request */ mmc_wait_for_req(ar_sdio->func->card->host, &mmc_req); + sdio_release_host(ar_sdio->func); + status = cmd.error ? cmd.error : data.error; scat_complete: @@ -389,17 +400,19 @@ static int ath6kl_sdio_read_write_sync(struct ath6kl *ar, u32 addr, u8 *buf, if (buf_needs_bounce(buf)) { if (!ar_sdio->dma_buffer) return -ENOMEM; + mutex_lock(&ar_sdio->dma_buffer_mutex); tbuf = ar_sdio->dma_buffer; memcpy(tbuf, buf, len); bounced = true; } else tbuf = buf; - sdio_claim_host(ar_sdio->func); ret = ath6kl_sdio_io(ar_sdio->func, request, addr, tbuf, len); if ((request & HIF_READ) && bounced) memcpy(buf, tbuf, len); - sdio_release_host(ar_sdio->func); + + if (bounced) + mutex_unlock(&ar_sdio->dma_buffer_mutex); return ret; } @@ -418,29 +431,25 @@ static void __ath6kl_sdio_write_async(struct ath6kl_sdio *ar_sdio, req->request); context = req->packet; ath6kl_sdio_free_bus_req(ar_sdio, req); - ath6kldev_rw_comp_handler(context, status); + ath6kl_hif_rw_comp_handler(context, status); } } static void ath6kl_sdio_write_async_work(struct work_struct *work) { struct ath6kl_sdio *ar_sdio; - unsigned long flags; struct bus_request *req, *tmp_req; ar_sdio = container_of(work, struct ath6kl_sdio, wr_async_work); - sdio_claim_host(ar_sdio->func); - spin_lock_irqsave(&ar_sdio->wr_async_lock, flags); + spin_lock_bh(&ar_sdio->wr_async_lock); list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { list_del(&req->list); - spin_unlock_irqrestore(&ar_sdio->wr_async_lock, flags); + spin_unlock_bh(&ar_sdio->wr_async_lock); __ath6kl_sdio_write_async(ar_sdio, req); - spin_lock_irqsave(&ar_sdio->wr_async_lock, flags); + spin_lock_bh(&ar_sdio->wr_async_lock); } - spin_unlock_irqrestore(&ar_sdio->wr_async_lock, flags); - - sdio_release_host(ar_sdio->func); + spin_unlock_bh(&ar_sdio->wr_async_lock); } static void ath6kl_sdio_irq_handler(struct sdio_func *func) @@ -459,20 +468,23 @@ static void ath6kl_sdio_irq_handler(struct sdio_func *func) */ sdio_release_host(ar_sdio->func); - status = ath6kldev_intr_bh_handler(ar_sdio->ar); + status = ath6kl_hif_intr_bh_handler(ar_sdio->ar); sdio_claim_host(ar_sdio->func); atomic_set(&ar_sdio->irq_handling, 0); WARN_ON(status && status != -ECANCELED); } -static int ath6kl_sdio_power_on(struct ath6kl_sdio *ar_sdio) +static int ath6kl_sdio_power_on(struct ath6kl *ar) { + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); struct sdio_func *func = ar_sdio->func; int ret = 0; if (!ar_sdio->is_disabled) return 0; + ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n"); + sdio_claim_host(func); ret = sdio_enable_func(func); @@ -495,13 +507,16 @@ static int ath6kl_sdio_power_on(struct ath6kl_sdio *ar_sdio) return ret; } -static int ath6kl_sdio_power_off(struct ath6kl_sdio *ar_sdio) +static int ath6kl_sdio_power_off(struct ath6kl *ar) { + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); int ret; if (ar_sdio->is_disabled) return 0; + ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n"); + /* Disable the card */ sdio_claim_host(ar_sdio->func); ret = sdio_disable_func(ar_sdio->func); @@ -521,7 +536,6 @@ static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer, { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); struct bus_request *bus_req; - unsigned long flags; bus_req = ath6kl_sdio_alloc_busreq(ar_sdio); @@ -534,9 +548,9 @@ static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer, bus_req->request = request; bus_req->packet = packet; - spin_lock_irqsave(&ar_sdio->wr_async_lock, flags); + spin_lock_bh(&ar_sdio->wr_async_lock); list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq); - spin_unlock_irqrestore(&ar_sdio->wr_async_lock, flags); + spin_unlock_bh(&ar_sdio->wr_async_lock); queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work); return 0; @@ -582,9 +596,8 @@ static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar) { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); struct hif_scatter_req *node = NULL; - unsigned long flag; - spin_lock_irqsave(&ar_sdio->scat_lock, flag); + spin_lock_bh(&ar_sdio->scat_lock); if (!list_empty(&ar_sdio->scat_req)) { node = list_first_entry(&ar_sdio->scat_req, @@ -592,7 +605,7 @@ static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar) list_del(&node->list); } - spin_unlock_irqrestore(&ar_sdio->scat_lock, flag); + spin_unlock_bh(&ar_sdio->scat_lock); return node; } @@ -601,13 +614,12 @@ static void ath6kl_sdio_scatter_req_add(struct ath6kl *ar, struct hif_scatter_req *s_req) { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); - unsigned long flag; - spin_lock_irqsave(&ar_sdio->scat_lock, flag); + spin_lock_bh(&ar_sdio->scat_lock); list_add_tail(&s_req->list, &ar_sdio->scat_req); - spin_unlock_irqrestore(&ar_sdio->scat_lock, flag); + spin_unlock_bh(&ar_sdio->scat_lock); } @@ -618,7 +630,6 @@ static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar, struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); u32 request = scat_req->req; int status = 0; - unsigned long flags; if (!scat_req->len) return -EINVAL; @@ -627,14 +638,12 @@ static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar, "hif-scatter: total len: %d scatter entries: %d\n", scat_req->len, scat_req->scat_entries); - if (request & HIF_SYNCHRONOUS) { - sdio_claim_host(ar_sdio->func); + if (request & HIF_SYNCHRONOUS) status = ath6kl_sdio_scat_rw(ar_sdio, scat_req->busrequest); - sdio_release_host(ar_sdio->func); - } else { - spin_lock_irqsave(&ar_sdio->wr_async_lock, flags); + else { + spin_lock_bh(&ar_sdio->wr_async_lock); list_add_tail(&scat_req->busrequest->list, &ar_sdio->wr_asyncq); - spin_unlock_irqrestore(&ar_sdio->wr_async_lock, flags); + spin_unlock_bh(&ar_sdio->wr_async_lock); queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work); } @@ -646,23 +655,27 @@ static void ath6kl_sdio_cleanup_scatter(struct ath6kl *ar) { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); struct hif_scatter_req *s_req, *tmp_req; - unsigned long flag; /* empty the free list */ - spin_lock_irqsave(&ar_sdio->scat_lock, flag); + spin_lock_bh(&ar_sdio->scat_lock); list_for_each_entry_safe(s_req, tmp_req, &ar_sdio->scat_req, list) { list_del(&s_req->list); - spin_unlock_irqrestore(&ar_sdio->scat_lock, flag); + spin_unlock_bh(&ar_sdio->scat_lock); + /* + * FIXME: should we also call completion handler with + * ath6kl_hif_rw_comp_handler() with status -ECANCELED so + * that the packet is properly freed? + */ if (s_req->busrequest) ath6kl_sdio_free_bus_req(ar_sdio, s_req->busrequest); kfree(s_req->virt_dma_buf); kfree(s_req->sgentries); kfree(s_req); - spin_lock_irqsave(&ar_sdio->scat_lock, flag); + spin_lock_bh(&ar_sdio->scat_lock); } - spin_unlock_irqrestore(&ar_sdio->scat_lock, flag); + spin_unlock_bh(&ar_sdio->scat_lock); } /* setup of HIF scatter resources */ @@ -673,6 +686,11 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar) int ret; bool virt_scat = false; + if (ar_sdio->scatter_enabled) + return 0; + + ar_sdio->scatter_enabled = true; + /* check if host supports scatter and it meets our requirements */ if (ar_sdio->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) { ath6kl_err("host only supports scatter of :%d entries, need: %d\n", @@ -687,8 +705,8 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar) MAX_SCATTER_REQUESTS, virt_scat); if (!ret) { - ath6kl_dbg(ATH6KL_DBG_SCATTER, - "hif-scatter enabled: max scatter req : %d entries: %d\n", + ath6kl_dbg(ATH6KL_DBG_BOOT, + "hif-scatter enabled requests %d entries %d\n", MAX_SCATTER_REQUESTS, MAX_SCATTER_ENTRIES_PER_REQ); @@ -712,8 +730,8 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar) return ret; } - ath6kl_dbg(ATH6KL_DBG_SCATTER, - "Vitual scatter enabled, max_scat_req:%d, entries:%d\n", + ath6kl_dbg(ATH6KL_DBG_BOOT, + "virtual scatter enabled requests %d entries %d\n", ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ); target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ; @@ -724,7 +742,47 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar) return 0; } -static int ath6kl_sdio_suspend(struct ath6kl *ar) +static int ath6kl_sdio_config(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + int ret; + + sdio_claim_host(func); + + if ((ar_sdio->id->device & MANUFACTURER_ID_ATH6KL_BASE_MASK) >= + MANUFACTURER_ID_AR6003_BASE) { + /* enable 4-bit ASYNC interrupt on AR6003 or later */ + ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card, + CCCR_SDIO_IRQ_MODE_REG, + SDIO_IRQ_MODE_ASYNC_4BIT_IRQ); + if (ret) { + ath6kl_err("Failed to enable 4-bit async irq mode %d\n", + ret); + goto out; + } + + ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n"); + } + + /* give us some time to enable, in ms */ + func->enable_timeout = 100; + + ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE); + if (ret) { + ath6kl_err("Set sdio block size %d failed: %d)\n", + HIF_MBOX_BLOCK_SIZE, ret); + sdio_release_host(func); + goto out; + } + +out: + sdio_release_host(func); + + return ret; +} + +static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow) { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); struct sdio_func *func = ar_sdio->func; @@ -733,12 +791,14 @@ static int ath6kl_sdio_suspend(struct ath6kl *ar) flags = sdio_get_host_pm_caps(func); - if (!(flags & MMC_PM_KEEP_POWER)) - /* as host doesn't support keep power we need to bail out */ - ath6kl_dbg(ATH6KL_DBG_SDIO, - "func %d doesn't support MMC_PM_KEEP_POWER\n", - func->num); - return -EINVAL; + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio suspend pm_caps 0x%x\n", flags); + + if (!(flags & MMC_PM_KEEP_POWER) || + (ar->conf_flags & ATH6KL_CONF_SUSPEND_CUTPOWER)) { + /* as host doesn't support keep power we need to cut power */ + return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, + NULL); + } ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); if (ret) { @@ -747,11 +807,367 @@ static int ath6kl_sdio_suspend(struct ath6kl *ar) return ret; } - ath6kl_deep_sleep_enable(ar); + if (!(flags & MMC_PM_WAKE_SDIO_IRQ)) + goto deepsleep; + + /* sdio irq wakes up host */ + + if (ar->state == ATH6KL_STATE_SCHED_SCAN) { + ret = ath6kl_cfg80211_suspend(ar, + ATH6KL_CFG_SUSPEND_SCHED_SCAN, + NULL); + if (ret) { + ath6kl_warn("Schedule scan suspend failed: %d", ret); + return ret; + } + + ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ); + if (ret) + ath6kl_warn("set sdio wake irq flag failed: %d\n", ret); + + return ret; + } + + if (wow) { + /* + * The host sdio controller is capable of keep power and + * sdio irq wake up at this point. It's fine to continue + * wow suspend operation. + */ + ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_WOW, wow); + if (ret) + return ret; + + ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ); + if (ret) + ath6kl_err("set sdio wake irq flag failed: %d\n", ret); + + return ret; + } + +deepsleep: + return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP, NULL); +} + +static int ath6kl_sdio_resume(struct ath6kl *ar) +{ + switch (ar->state) { + case ATH6KL_STATE_OFF: + case ATH6KL_STATE_CUTPOWER: + ath6kl_dbg(ATH6KL_DBG_SUSPEND, + "sdio resume configuring sdio\n"); + + /* need to set sdio settings after power is cut from sdio */ + ath6kl_sdio_config(ar); + break; + + case ATH6KL_STATE_ON: + break; + + case ATH6KL_STATE_DEEPSLEEP: + break; + + case ATH6KL_STATE_WOW: + break; + case ATH6KL_STATE_SCHED_SCAN: + break; + } + + ath6kl_cfg80211_resume(ar); + + return 0; +} + +/* set the window address register (using 4-byte register access ). */ +static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr) +{ + int status; + u8 addr_val[4]; + s32 i; + + /* + * Write bytes 1,2,3 of the register to set the upper address bytes, + * the LSB is written last to initiate the access cycle + */ + + for (i = 1; i <= 3; i++) { + /* + * Fill the buffer with the address byte value we want to + * hit 4 times. + */ + memset(addr_val, ((u8 *)&addr)[i], 4); + + /* + * Hit each byte of the register address with a 4-byte + * write operation to the same address, this is a harmless + * operation. + */ + status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val, + 4, HIF_WR_SYNC_BYTE_FIX); + if (status) + break; + } + + if (status) { + ath6kl_err("%s: failed to write initial bytes of 0x%x " + "to window reg: 0x%X\n", __func__, + addr, reg_addr); + return status; + } + + /* + * Write the address register again, this time write the whole + * 4-byte value. The effect here is that the LSB write causes the + * cycle to start, the extra 3 byte write to bytes 1,2,3 has no + * effect since we are writing the same values again + */ + status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr), + 4, HIF_WR_SYNC_BYTE_INC); + + if (status) { + ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n", + __func__, addr, reg_addr); + return status; + } + + return 0; +} + +static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data) +{ + int status; + + /* set window register to start read cycle */ + status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS, + address); + + if (status) + return status; + + /* read the data */ + status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS, + (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC); + if (status) { + ath6kl_err("%s: failed to read from window data addr\n", + __func__); + return status; + } + + return status; +} + +static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address, + __le32 data) +{ + int status; + u32 val = (__force u32) data; + + /* set write data */ + status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS, + (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC); + if (status) { + ath6kl_err("%s: failed to write 0x%x to window data addr\n", + __func__, data); + return status; + } + + /* set window register, which starts the write cycle */ + return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS, + address); +} + +static int ath6kl_sdio_bmi_credits(struct ath6kl *ar) +{ + u32 addr; + unsigned long timeout; + int ret; + + ar->bmi.cmd_credits = 0; + + /* Read the counter register to get the command credits */ + addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) { + + /* + * Hit the credit counter with a 4-byte access, the first byte + * read will hit the counter and cause a decrement, while the + * remaining 3 bytes has no effect. The rationale behind this + * is to make all HIF accesses 4-byte aligned. + */ + ret = ath6kl_sdio_read_write_sync(ar, addr, + (u8 *)&ar->bmi.cmd_credits, 4, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to decrement the command credit " + "count register: %d\n", ret); + return ret; + } + + /* The counter is only 8 bits. + * Ignore anything in the upper 3 bytes + */ + ar->bmi.cmd_credits &= 0xFF; + } + + if (!ar->bmi.cmd_credits) { + ath6kl_err("bmi communication timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar) +{ + unsigned long timeout; + u32 rx_word = 0; + int ret = 0; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while ((time_before(jiffies, timeout)) && !rx_word) { + ret = ath6kl_sdio_read_write_sync(ar, + RX_LOOKAHEAD_VALID_ADDRESS, + (u8 *)&rx_word, sizeof(rx_word), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n"); + return ret; + } + + /* all we really want is one bit */ + rx_word &= (1 << ENDPOINT1); + } + + if (!rx_word) { + ath6kl_err("bmi_recv_buf FIFO empty\n"); + return -EINVAL; + } + + return ret; +} + +static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + ret = ath6kl_sdio_bmi_credits(ar); + if (ret) + return ret; + + addr = ar->mbox_info.htc_addr; + + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_WR_SYNC_BYTE_INC); + if (ret) + ath6kl_err("unable to send the bmi data to the device\n"); + + return ret; +} + +static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + /* + * During normal bootup, small reads may be required. + * Rather than issue an HIF Read and then wait as the Target + * adds successive bytes to the FIFO, we wait here until + * we know that response data is available. + * + * This allows us to cleanly timeout on an unexpected + * Target failure rather than risk problems at the HIF level. + * In particular, this avoids SDIO timeouts and possibly garbage + * data on some host controllers. And on an interconnect + * such as Compact Flash (as well as some SDIO masters) which + * does not provide any indication on data timeout, it avoids + * a potential hang or garbage response. + * + * Synchronization is more difficult for reads larger than the + * size of the MBOX FIFO (128B), because the Target is unable + * to push the 129th byte of data until AFTER the Host posts an + * HIF Read and removes some FIFO data. So for large reads the + * Host proceeds to post an HIF Read BEFORE all the data is + * actually available to read. Fortunately, large BMI reads do + * not occur in practice -- they're supported for debug/development. + * + * So Host/Target BMI synchronization is divided into these cases: + * CASE 1: length < 4 + * Should not happen + * + * CASE 2: 4 <= length <= 128 + * Wait for first 4 bytes to be in FIFO + * If CONSERVATIVE_BMI_READ is enabled, also wait for + * a BMI command credit, which indicates that the ENTIRE + * response is available in the the FIFO + * + * CASE 3: length > 128 + * Wait for the first 4 bytes to be in FIFO + * + * For most uses, a small timeout should be sufficient and we will + * usually see a response quickly; but there may be some unusual + * (debug) cases of BMI_EXECUTE where we want an larger timeout. + * For now, we use an unbounded busy loop while waiting for + * BMI_EXECUTE. + * + * If BMI_EXECUTE ever needs to support longer-latency execution, + * especially in production, this code needs to be enhanced to sleep + * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently + * a function of Host processor speed. + */ + if (len >= 4) { /* NB: Currently, always true */ + ret = ath6kl_bmi_get_rx_lkahd(ar); + if (ret) + return ret; + } + + addr = ar->mbox_info.htc_addr; + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to read the bmi data from the device: %d\n", + ret); + return ret; + } return 0; } +static void ath6kl_sdio_stop(struct ath6kl *ar) +{ + struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); + struct bus_request *req, *tmp_req; + void *context; + + /* FIXME: make sure that wq is not queued again */ + + cancel_work_sync(&ar_sdio->wr_async_work); + + spin_lock_bh(&ar_sdio->wr_async_lock); + + list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { + list_del(&req->list); + + if (req->scat_req) { + /* this is a scatter gather request */ + req->scat_req->status = -ECANCELED; + req->scat_req->complete(ar_sdio->ar->htc_target, + req->scat_req); + } else { + context = req->packet; + ath6kl_sdio_free_bus_req(ar_sdio, req); + ath6kl_hif_rw_comp_handler(context, -ECANCELED); + } + } + + spin_unlock_bh(&ar_sdio->wr_async_lock); + + WARN_ON(get_queue_depth(&ar_sdio->scat_req) != 4); +} + static const struct ath6kl_hif_ops ath6kl_sdio_ops = { .read_write_sync = ath6kl_sdio_read_write_sync, .write_async = ath6kl_sdio_write_async, @@ -763,8 +1179,47 @@ static const struct ath6kl_hif_ops ath6kl_sdio_ops = { .scat_req_rw = ath6kl_sdio_async_rw_scatter, .cleanup_scatter = ath6kl_sdio_cleanup_scatter, .suspend = ath6kl_sdio_suspend, + .resume = ath6kl_sdio_resume, + .diag_read32 = ath6kl_sdio_diag_read32, + .diag_write32 = ath6kl_sdio_diag_write32, + .bmi_read = ath6kl_sdio_bmi_read, + .bmi_write = ath6kl_sdio_bmi_write, + .power_on = ath6kl_sdio_power_on, + .power_off = ath6kl_sdio_power_off, + .stop = ath6kl_sdio_stop, }; +#ifdef CONFIG_PM_SLEEP + +/* + * Empty handlers so that mmc subsystem doesn't remove us entirely during + * suspend. We instead follow cfg80211 suspend/resume handlers. + */ +static int ath6kl_sdio_pm_suspend(struct device *device) +{ + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm suspend\n"); + + return 0; +} + +static int ath6kl_sdio_pm_resume(struct device *device) +{ + ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm resume\n"); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath6kl_sdio_pm_ops, ath6kl_sdio_pm_suspend, + ath6kl_sdio_pm_resume); + +#define ATH6KL_SDIO_PM_OPS (&ath6kl_sdio_pm_ops) + +#else + +#define ATH6KL_SDIO_PM_OPS NULL + +#endif /* CONFIG_PM_SLEEP */ + static int ath6kl_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { @@ -773,8 +1228,8 @@ static int ath6kl_sdio_probe(struct sdio_func *func, struct ath6kl *ar; int count; - ath6kl_dbg(ATH6KL_DBG_SDIO, - "new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n", + ath6kl_dbg(ATH6KL_DBG_BOOT, + "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n", func->num, func->vendor, func->device, func->max_blksize, func->cur_blksize); @@ -797,6 +1252,7 @@ static int ath6kl_sdio_probe(struct sdio_func *func, spin_lock_init(&ar_sdio->lock); spin_lock_init(&ar_sdio->scat_lock); spin_lock_init(&ar_sdio->wr_async_lock); + mutex_init(&ar_sdio->dma_buffer_mutex); INIT_LIST_HEAD(&ar_sdio->scat_req); INIT_LIST_HEAD(&ar_sdio->bus_req_freeq); @@ -815,62 +1271,29 @@ static int ath6kl_sdio_probe(struct sdio_func *func, } ar_sdio->ar = ar; + ar->hif_type = ATH6KL_HIF_TYPE_SDIO; ar->hif_priv = ar_sdio; ar->hif_ops = &ath6kl_sdio_ops; + ar->bmi.max_data_size = 256; ath6kl_sdio_set_mbox_info(ar); - sdio_claim_host(func); - - if ((ar_sdio->id->device & MANUFACTURER_ID_ATH6KL_BASE_MASK) >= - MANUFACTURER_ID_AR6003_BASE) { - /* enable 4-bit ASYNC interrupt on AR6003 or later */ - ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card, - CCCR_SDIO_IRQ_MODE_REG, - SDIO_IRQ_MODE_ASYNC_4BIT_IRQ); - if (ret) { - ath6kl_err("Failed to enable 4-bit async irq mode %d\n", - ret); - sdio_release_host(func); - goto err_cfg80211; - } - - ath6kl_dbg(ATH6KL_DBG_SDIO, "4-bit async irq mode enabled\n"); - } - - /* give us some time to enable, in ms */ - func->enable_timeout = 100; - - sdio_release_host(func); - - ret = ath6kl_sdio_power_on(ar_sdio); - if (ret) - goto err_cfg80211; - - sdio_claim_host(func); - - ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE); + ret = ath6kl_sdio_config(ar); if (ret) { - ath6kl_err("Set sdio block size %d failed: %d)\n", - HIF_MBOX_BLOCK_SIZE, ret); - sdio_release_host(func); - goto err_off; + ath6kl_err("Failed to config sdio: %d\n", ret); + goto err_core_alloc; } - sdio_release_host(func); - ret = ath6kl_core_init(ar); if (ret) { ath6kl_err("Failed to init ath6kl core\n"); - goto err_off; + goto err_core_alloc; } return ret; -err_off: - ath6kl_sdio_power_off(ar_sdio); -err_cfg80211: - ath6kl_cfg80211_deinit(ar_sdio->ar); +err_core_alloc: + ath6kl_core_free(ar_sdio->ar); err_dma: kfree(ar_sdio->dma_buffer); err_hif: @@ -883,8 +1306,8 @@ static void ath6kl_sdio_remove(struct sdio_func *func) { struct ath6kl_sdio *ar_sdio; - ath6kl_dbg(ATH6KL_DBG_SDIO, - "removed func %d vendor 0x%x device 0x%x\n", + ath6kl_dbg(ATH6KL_DBG_BOOT, + "sdio removed func %d vendor 0x%x device 0x%x\n", func->num, func->vendor, func->device); ar_sdio = sdio_get_drvdata(func); @@ -892,9 +1315,7 @@ static void ath6kl_sdio_remove(struct sdio_func *func) ath6kl_stop_txrx(ar_sdio->ar); cancel_work_sync(&ar_sdio->wr_async_work); - ath6kl_unavail_ev(ar_sdio->ar); - - ath6kl_sdio_power_off(ar_sdio); + ath6kl_core_cleanup(ar_sdio->ar); kfree(ar_sdio->dma_buffer); kfree(ar_sdio); @@ -903,16 +1324,19 @@ static void ath6kl_sdio_remove(struct sdio_func *func) static const struct sdio_device_id ath6kl_sdio_devices[] = { {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x0))}, {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x1))}, + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x0))}, + {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x1))}, {}, }; MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices); static struct sdio_driver ath6kl_sdio_driver = { - .name = "ath6kl_sdio", + .name = "ath6kl", .id_table = ath6kl_sdio_devices, .probe = ath6kl_sdio_probe, .remove = ath6kl_sdio_remove, + .drv.pm = ATH6KL_SDIO_PM_OPS, }; static int __init ath6kl_sdio_init(void) @@ -938,13 +1362,19 @@ MODULE_AUTHOR("Atheros Communications, Inc."); MODULE_DESCRIPTION("Driver support for Atheros AR600x SDIO devices"); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_FIRMWARE(AR6003_REV2_OTP_FILE); -MODULE_FIRMWARE(AR6003_REV2_FIRMWARE_FILE); -MODULE_FIRMWARE(AR6003_REV2_PATCH_FILE); -MODULE_FIRMWARE(AR6003_REV2_BOARD_DATA_FILE); -MODULE_FIRMWARE(AR6003_REV2_DEFAULT_BOARD_DATA_FILE); -MODULE_FIRMWARE(AR6003_REV3_OTP_FILE); -MODULE_FIRMWARE(AR6003_REV3_FIRMWARE_FILE); -MODULE_FIRMWARE(AR6003_REV3_PATCH_FILE); -MODULE_FIRMWARE(AR6003_REV3_BOARD_DATA_FILE); -MODULE_FIRMWARE(AR6003_REV3_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_OTP_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_PATCH_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_OTP_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_PATCH_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_FIRMWARE_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE); +MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE); |