diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/btcoex.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/btcoex.c | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c new file mode 100644 index 00000000000..55f607b7699 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/btcoex.c @@ -0,0 +1,340 @@ +/* + * Copyright (c) 2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ath9k.h" + +static const struct ath_btcoex_config ath_bt_config = { 0, true, true, + ATH_BT_COEX_MODE_SLOTTED, true, true, 2, 5, true }; + +static const u16 ath_subsysid_tbl[] = { + AR9280_COEX2WIRE_SUBSYSID, + AT9285_COEX3WIRE_SA_SUBSYSID, + AT9285_COEX3WIRE_DA_SUBSYSID +}; + +/* + * Checks the subsystem id of the device to see if it + * supports btcoex + */ +bool ath_btcoex_supported(u16 subsysid) +{ + int i; + + if (!subsysid) + return false; + + for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++) + if (subsysid == ath_subsysid_tbl[i]) + return true; + + return false; +} + +/* + * Detects if there is any priority bt traffic + */ +static void ath_detect_bt_priority(struct ath_softc *sc) +{ + struct ath_btcoex_info *btinfo = &sc->btcoex_info; + + if (ath9k_hw_gpio_get(sc->sc_ah, btinfo->btpriority_gpio)) + btinfo->bt_priority_cnt++; + + if (time_after(jiffies, btinfo->bt_priority_time + + msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) { + if (btinfo->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) { + DPRINTF(sc, ATH_DBG_BTCOEX, + "BT priority traffic detected"); + sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED; + } else { + sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED; + } + + btinfo->bt_priority_cnt = 0; + btinfo->bt_priority_time = jiffies; + } +} + +/* + * Configures appropriate weight based on stomp type. + */ +static void ath_btcoex_bt_stomp(struct ath_softc *sc, + struct ath_btcoex_info *btinfo, + int stomp_type) +{ + + switch (stomp_type) { + case ATH_BTCOEX_STOMP_ALL: + ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT, + AR_STOMP_ALL_WLAN_WGHT); + break; + case ATH_BTCOEX_STOMP_LOW: + ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT, + AR_STOMP_LOW_WLAN_WGHT); + break; + case ATH_BTCOEX_STOMP_NONE: + ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT, + AR_STOMP_NONE_WLAN_WGHT); + break; + default: + DPRINTF(sc, ATH_DBG_BTCOEX, "Invalid Stomptype\n"); + break; + } + + ath9k_hw_btcoex_enable(sc->sc_ah); +} + +/* + * This is the master bt coex timer which runs for every + * 45ms, bt traffic will be given priority during 55% of this + * period while wlan gets remaining 45% + */ + +static void ath_btcoex_period_timer(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *) data; + struct ath_btcoex_info *btinfo = &sc->btcoex_info; + + ath_detect_bt_priority(sc); + + spin_lock_bh(&btinfo->btcoex_lock); + + ath_btcoex_bt_stomp(sc, btinfo, btinfo->bt_stomp_type); + + spin_unlock_bh(&btinfo->btcoex_lock); + + if (btinfo->btcoex_period != btinfo->btcoex_no_stomp) { + if (btinfo->hw_timer_enabled) + ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer); + + ath_gen_timer_start(sc->sc_ah, + btinfo->no_stomp_timer, + (ath9k_hw_gettsf32(sc->sc_ah) + + btinfo->btcoex_no_stomp), + btinfo->btcoex_no_stomp * 10); + btinfo->hw_timer_enabled = true; + } + + mod_timer(&btinfo->period_timer, jiffies + + msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD)); +} + +/* + * Generic tsf based hw timer which configures weight + * registers to time slice between wlan and bt traffic + */ + +static void ath_btcoex_no_stomp_timer(void *arg) +{ + struct ath_softc *sc = (struct ath_softc *)arg; + struct ath_btcoex_info *btinfo = &sc->btcoex_info; + + DPRINTF(sc, ATH_DBG_BTCOEX, "no stomp timer running \n"); + + spin_lock_bh(&btinfo->btcoex_lock); + + if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_LOW) + ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_NONE); + else if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_ALL) + ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_LOW); + + spin_unlock_bh(&btinfo->btcoex_lock); +} + +static int ath_init_btcoex_info(struct ath_hw *hw, + struct ath_btcoex_info *btcoex_info) +{ + u32 i; + int qnum; + + qnum = ath_tx_get_qnum(hw->ah_sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE); + + btcoex_info->bt_coex_mode = + (btcoex_info->bt_coex_mode & AR_BT_QCU_THRESH) | + SM(ath_bt_config.bt_time_extend, AR_BT_TIME_EXTEND) | + SM(ath_bt_config.bt_txstate_extend, AR_BT_TXSTATE_EXTEND) | + SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) | + SM(ath_bt_config.bt_mode, AR_BT_MODE) | + SM(ath_bt_config.bt_quiet_collision, AR_BT_QUIET) | + SM(ath_bt_config.bt_rxclear_polarity, AR_BT_RX_CLEAR_POLARITY) | + SM(ath_bt_config.bt_priority_time, AR_BT_PRIORITY_TIME) | + SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) | + SM(qnum, AR_BT_QCU_THRESH); + + btcoex_info->bt_coex_mode2 = + SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) | + SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) | + AR_BT_DISABLE_BT_ANT; + + btcoex_info->bt_stomp_type = ATH_BTCOEX_STOMP_LOW; + + btcoex_info->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000; + + btcoex_info->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) * + btcoex_info->btcoex_period / 100; + + for (i = 0; i < 32; i++) + hw->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i; + + setup_timer(&btcoex_info->period_timer, ath_btcoex_period_timer, + (unsigned long) hw->ah_sc); + + btcoex_info->no_stomp_timer = ath_gen_timer_alloc(hw, + ath_btcoex_no_stomp_timer, + ath_btcoex_no_stomp_timer, + (void *)hw->ah_sc, AR_FIRST_NDP_TIMER); + + if (btcoex_info->no_stomp_timer == NULL) + return -ENOMEM; + + spin_lock_init(&btcoex_info->btcoex_lock); + + return 0; +} + +int ath9k_hw_btcoex_init(struct ath_hw *ah) +{ + struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info; + int ret = 0; + + if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) { + /* connect bt_active to baseband */ + REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL, + (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF | + AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF)); + + REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, + AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB); + + /* Set input mux for bt_active to gpio pin */ + REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1, + AR_GPIO_INPUT_MUX1_BT_ACTIVE, + btcoex_info->btactive_gpio); + + /* Configure the desired gpio port for input */ + ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio); + } else { + /* btcoex 3-wire */ + REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, + (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB | + AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB)); + + /* Set input mux for bt_prority_async and + * bt_active_async to GPIO pins */ + REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1, + AR_GPIO_INPUT_MUX1_BT_ACTIVE, + btcoex_info->btactive_gpio); + + REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1, + AR_GPIO_INPUT_MUX1_BT_PRIORITY, + btcoex_info->btpriority_gpio); + + /* Configure the desired GPIO ports for input */ + + ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio); + ath9k_hw_cfg_gpio_input(ah, btcoex_info->btpriority_gpio); + + ret = ath_init_btcoex_info(ah, btcoex_info); + } + + return ret; +} + +void ath9k_hw_btcoex_enable(struct ath_hw *ah) +{ + struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info; + + if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) { + /* Configure the desired GPIO port for TX_FRAME output */ + ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio, + AR_GPIO_OUTPUT_MUX_AS_TX_FRAME); + } else { + /* + * Program coex mode and weight registers to + * enable coex 3-wire + */ + REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_info->bt_coex_mode); + REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_info->bt_coex_weights); + REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_info->bt_coex_mode2); + + REG_RMW_FIELD(ah, AR_QUIET1, + AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1); + REG_RMW_FIELD(ah, AR_PCU_MISC, + AR_PCU_BT_ANT_PREVENT_RX, 0); + + ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio, + AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL); + } + + REG_RMW(ah, AR_GPIO_PDPU, + (0x2 << (btcoex_info->btactive_gpio * 2)), + (0x3 << (btcoex_info->btactive_gpio * 2))); + + ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED; +} + +void ath9k_hw_btcoex_disable(struct ath_hw *ah) +{ + struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info; + + ath9k_hw_set_gpio(ah, btcoex_info->wlanactive_gpio, 0); + + ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + + if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_3WIRE) { + REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE); + REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0); + REG_WRITE(ah, AR_BT_COEX_MODE2, 0); + } + + ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED; +} + +/* + * Pause btcoex timer and bt duty cycle timer + */ +void ath_btcoex_timer_pause(struct ath_softc *sc, + struct ath_btcoex_info *btinfo) +{ + + del_timer_sync(&btinfo->period_timer); + + if (btinfo->hw_timer_enabled) + ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer); + + btinfo->hw_timer_enabled = false; +} + +/* + * (Re)start btcoex timers + */ +void ath_btcoex_timer_resume(struct ath_softc *sc, + struct ath_btcoex_info *btinfo) +{ + + DPRINTF(sc, ATH_DBG_BTCOEX, "Starting btcoex timers"); + + /* make sure duty cycle timer is also stopped when resuming */ + if (btinfo->hw_timer_enabled) + ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer); + + btinfo->bt_priority_cnt = 0; + btinfo->bt_priority_time = jiffies; + sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED; + + mod_timer(&btinfo->period_timer, jiffies); +} |