1 files changed, 11 insertions, 118 deletions

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 406ffd06b6d..475e4caee77 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1518,61 +1518,22 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   struct ath9k_hw_cal_data *caldata, bool bChannelChange)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
 	u32 saveLedState;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
 	u32 macStaId1;
 	u64 tsf = 0;
 	int i, r;
-	bool allow_fbs = false;
+	bool allow_fbs = false, start_mci_reset = false;
 	bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
 	bool save_fullsleep = ah->chip_fullsleep;
 
 	if (mci) {
-
-		ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
-
-		if (mci_hw->bt_state == MCI_BT_CAL_START) {
-			u32 payload[4] = {0, 0, 0, 0};
-
-			ath_dbg(common, MCI, "MCI stop rx for BT CAL\n");
-
-			mci_hw->bt_state = MCI_BT_CAL;
-
-			/*
-			 * MCI FIX: disable mci interrupt here. This is to avoid
-			 * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
-			 * lead to mci_intr reentry.
-			 */
-
-			ar9003_mci_disable_interrupt(ah);
-
-			ath_dbg(common, MCI, "send WLAN_CAL_GRANT\n");
-			MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
-			ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
-						16, true, false);
-
-			ath_dbg(common, MCI, "\nMCI BT is calibrating\n");
-
-			/* Wait BT calibration to be completed for 25ms */
-
-			if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
-								  0, 25000))
-				ath_dbg(common, MCI,
-					"MCI got BT_CAL_DONE\n");
-			else
-				ath_dbg(common, MCI,
-					"MCI ### BT cal takes to long, force bt_state to be bt_awake\n");
-			mci_hw->bt_state = MCI_BT_AWAKE;
-			/* MCI FIX: enable mci interrupt here */
-			ar9003_mci_enable_interrupt(ah);
-
-			return true;
-		}
+		start_mci_reset = ar9003_mci_start_reset(ah, chan);
+		if (start_mci_reset)
+			return 0;
 	}
 
-
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
 
@@ -1609,7 +1570,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah, true);
-			if (mci && mci_hw->ready)
+			if (mci && ar9003_mci_is_ready(ah))
 				ar9003_mci_2g5g_switch(ah, true);
 
 			if (AR_SREV_9271(ah))
@@ -1618,19 +1579,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		}
 	}
 
-	if (mci) {
-		ar9003_mci_disable_interrupt(ah);
-
-		if (mci_hw->ready && !save_fullsleep) {
-			ar9003_mci_mute_bt(ah);
-			udelay(20);
-			REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
-		}
-
-		mci_hw->bt_state = MCI_BT_SLEEP;
-		mci_hw->ready = false;
-	}
-
+	if (mci)
+		ar9003_mci_stop_bt(ah, save_fullsleep);
 
 	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
 	if (saveDefAntenna == 0)
@@ -1807,53 +1757,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_loadnf(ah, chan);
 	ath9k_hw_start_nfcal(ah, true);
 
-	if (mci && mci_hw->ready) {
-
-		if (IS_CHAN_2GHZ(chan) &&
-		    (mci_hw->bt_state == MCI_BT_SLEEP)) {
-
-			if (ar9003_mci_check_int(ah,
-			    AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
-			    ar9003_mci_check_int(ah,
-			    AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
-
-				/*
-				 * BT is sleeping. Check if BT wakes up during
-				 * WLAN calibration. If BT wakes up during
-				 * WLAN calibration, need to go through all
-				 * message exchanges again and recal.
-				 */
-
-				ath_dbg(common, MCI,
-					"MCI BT wakes up during WLAN calibration\n");
-
-				REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
-					  AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
-					  AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
-				ath_dbg(common, MCI, "MCI send REMOTE_RESET\n");
-				ar9003_mci_remote_reset(ah, true);
-				ar9003_mci_send_sys_waking(ah, true);
-				udelay(1);
-				if (IS_CHAN_2GHZ(chan))
-					ar9003_mci_send_lna_transfer(ah, true);
-
-				mci_hw->bt_state = MCI_BT_AWAKE;
-
-				ath_dbg(common, MCI, "MCI re-cal\n");
-
-				if (caldata) {
-					caldata->done_txiqcal_once = false;
-					caldata->done_txclcal_once = false;
-					caldata->rtt_hist.num_readings = 0;
-				}
-
-				if (!ath9k_hw_init_cal(ah, chan))
-					return -EIO;
-
-			}
-		}
-		ar9003_mci_enable_interrupt(ah);
-	}
+	if (mci && ar9003_mci_end_reset(ah, chan, caldata))
+		return -EIO;
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
@@ -1898,20 +1803,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	    ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE)
 		ath9k_hw_btcoex_enable(ah);
 
-	if (mci && mci_hw->ready) {
-		/*
-		 * check BT state again to make
-		 * sure it's not changed.
-		 */
-
-		ar9003_mci_sync_bt_state(ah);
-		ar9003_mci_2g5g_switch(ah, true);
-
-		if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
-				(mci_hw->query_bt == true)) {
-			mci_hw->need_flush_btinfo = true;
-		}
-	}
+	if (mci)
+		ar9003_mci_check_bt(ah);
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9003_hw_bb_watchdog_config(ah);