diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/phy.c | 90 |
1 files changed, 0 insertions, 90 deletions
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c index 13ab4d7eb7a..c3b59390fe3 100644 --- a/drivers/net/wireless/ath/ath9k/phy.c +++ b/drivers/net/wireless/ath/ath9k/phy.c @@ -528,95 +528,6 @@ static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq) } /** - * ath9k_hw_decrease_chain_power() - * - * @ah: atheros hardware structure - * @chan: - * - * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios. - * - * Sets a chain internal RF path to the lowest output power. Any - * further writes to bank6 after this setting will override these - * changes. Thus this function must be the last function in the - * sequence to modify bank 6. - * - * This function must be called after ar5416SetRfRegs() which is - * called from ath9k_hw_process_ini() due to swizzling of bank 6. - * Depends on ah->analogBank6Data being initialized by - * ath9k_hw_set_rf_regs() - * - * Additional additive reduction in power - - * change chain's switch table so chain's tx state is actually the rx - * state value. May produce different results in 2GHz/5GHz as well as - * board to board but in general should be a reduction. - * - * Activated by #ifdef ALTER_SWITCH. Not tried yet. If so, must be - * called after ah->eep_ops->set_board_values() due to RMW of - * PHY_SWITCH_CHAIN_0. - */ -void ath9k_hw_decrease_chain_power(struct ath_hw *ah, - struct ath9k_channel *chan) -{ - int i, regWrites = 0; - u32 bank6SelMask; - u32 *bank6Temp = ah->bank6Temp; - - BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); - - switch (ah->config.diversity_control) { - case ATH9K_ANT_FIXED_A: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */ - REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */ - break; - case ATH9K_ANT_FIXED_B: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */ - REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */ - break; - case ATH9K_ANT_VARIABLE: - return; /* do not change anything */ - break; - default: - return; /* do not change anything */ - break; - } - - for (i = 0; i < ah->iniBank6.ia_rows; i++) - bank6Temp[i] = ah->analogBank6Data[i]; - - /* Write Bank 5 to switch Bank 6 write to selected chain only */ - REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); - - /* - * Modify Bank6 selected chain to use lowest amplification. - * Modifies the parameters to a value of 1. - * Depends on existing bank 6 values to be cached in - * ah->analogBank6Data - */ - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); - - REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); -#ifdef ALTER_SWITCH - REG_WRITE(ah, PHY_SWITCH_CHAIN_0, - (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) - | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); -#endif -} - -/** * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios * @ah: atheros hardware stucture * @chan: @@ -687,7 +598,6 @@ int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) } ath9k_hw_force_bias(ah, freq); - ath9k_hw_decrease_chain_power(ah, chan); reg32 = (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | |