diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/rc.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/rc.h | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h new file mode 100644 index 00000000000..e3abd76103f --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/rc.h @@ -0,0 +1,216 @@ +/* + * Copyright (c) 2004 Sam Leffler, Errno Consulting + * Copyright (c) 2004 Video54 Technologies, Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef RC_H +#define RC_H + +struct ath_softc; + +#define ATH_RATE_MAX 30 +#define RATE_TABLE_SIZE 64 +#define MAX_TX_RATE_PHY 48 + +/* VALID_ALL - valid for 20/40/Legacy, + * VALID - Legacy only, + * VALID_20 - HT 20 only, + * VALID_40 - HT 40 only */ + +#define INVALID 0x0 +#define VALID 0x1 +#define VALID_20 0x2 +#define VALID_40 0x4 +#define VALID_2040 (VALID_20|VALID_40) +#define VALID_ALL (VALID_2040|VALID) + +enum { + WLAN_RC_PHY_OFDM, + WLAN_RC_PHY_CCK, + WLAN_RC_PHY_HT_20_SS, + WLAN_RC_PHY_HT_20_DS, + WLAN_RC_PHY_HT_40_SS, + WLAN_RC_PHY_HT_40_DS, + WLAN_RC_PHY_HT_20_SS_HGI, + WLAN_RC_PHY_HT_20_DS_HGI, + WLAN_RC_PHY_HT_40_SS_HGI, + WLAN_RC_PHY_HT_40_DS_HGI, + WLAN_RC_PHY_MAX +}; + +#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) + +#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS) + +#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \ + (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID)) + +/* Return TRUE if flag supports HT20 && client supports HT20 or + * return TRUE if flag supports HT40 && client supports HT40. + * This is used becos some rates overlap between HT20/HT40. + */ +#define WLAN_RC_PHY_HT_VALID(flag, capflag) \ + (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \ + ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG))) + +#define WLAN_RC_DS_FLAG (0x01) +#define WLAN_RC_40_FLAG (0x02) +#define WLAN_RC_SGI_FLAG (0x04) +#define WLAN_RC_HT_FLAG (0x08) + +/** + * struct ath_rate_table - Rate Control table + * @valid: valid for use in rate control + * @valid_single_stream: valid for use in rate control for + * single stream operation + * @phy: CCK/OFDM + * @ratekbps: rate in Kbits per second + * @user_ratekbps: user rate in Kbits per second + * @ratecode: rate that goes into HW descriptors + * @short_preamble: Mask for enabling short preamble in ratecode for CCK + * @dot11rate: value that goes into supported + * rates info element of MLME + * @ctrl_rate: Index of next lower basic rate, used for duration computation + * @max_4ms_framelen: maximum frame length(bytes) for tx duration + * @probe_interval: interval for rate control to probe for other rates + * @rssi_reduce_interval: interval for rate control to reduce rssi + * @initial_ratemax: initial ratemax value + */ +struct ath_rate_table { + int rate_cnt; + struct { + int valid; + int valid_single_stream; + u8 phy; + u32 ratekbps; + u32 user_ratekbps; + u8 ratecode; + u8 short_preamble; + u8 dot11rate; + u8 ctrl_rate; + int8_t rssi_ack_validmin; + int8_t rssi_ack_deltamin; + u8 base_index; + u8 cw40index; + u8 sgi_index; + u8 ht_index; + u32 max_4ms_framelen; + } info[RATE_TABLE_SIZE]; + u32 probe_interval; + u32 rssi_reduce_interval; + u8 initial_ratemax; +}; + +struct ath_tx_ratectrl_state { + int8_t rssi_thres; /* required rssi for this rate (dB) */ + u8 per; /* recent estimate of packet error rate (%) */ +}; + +struct ath_rateset { + u8 rs_nrates; + u8 rs_rates[ATH_RATE_MAX]; +}; + +/** + * struct ath_rate_priv - Rate Control priv data + * @state: RC state + * @rssi_last: last ACK rssi + * @rssi_last_lookup: last ACK rssi used for lookup + * @rssi_last_prev: previous last ACK rssi + * @rssi_last_prev2: 2nd previous last ACK rssi + * @rssi_sum_cnt: count of rssi_sum for averaging + * @rssi_sum_rate: rate that we are averaging + * @rssi_sum: running sum of rssi for averaging + * @probe_rate: rate we are probing at + * @rssi_time: msec timestamp for last ack rssi + * @rssi_down_time: msec timestamp for last down step + * @probe_time: msec timestamp for last probe + * @hw_maxretry_pktcnt: num of packets since we got HW max retry error + * @max_valid_rate: maximum number of valid rate + * @per_down_time: msec timestamp for last PER down step + * @valid_phy_ratecnt: valid rate count + * @rate_max_phy: phy index for the max rate + * @probe_interval: interval for ratectrl to probe for other rates + * @prev_data_rix: rate idx of last data frame + * @ht_cap: HT capabilities + * @neg_rates: Negotatied rates + * @neg_ht_rates: Negotiated HT rates + */ +struct ath_rate_priv { + int8_t rssi_last; + int8_t rssi_last_lookup; + int8_t rssi_last_prev; + int8_t rssi_last_prev2; + int32_t rssi_sum_cnt; + int32_t rssi_sum_rate; + int32_t rssi_sum; + u8 rate_table_size; + u8 probe_rate; + u8 hw_maxretry_pktcnt; + u8 max_valid_rate; + u8 valid_rate_index[RATE_TABLE_SIZE]; + u8 ht_cap; + u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; + u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE]; + u8 rate_max_phy; + u32 rssi_time; + u32 rssi_down_time; + u32 probe_time; + u32 per_down_time; + u32 probe_interval; + u32 prev_data_rix; + u32 tx_triglevel_max; + struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE]; + struct ath_rateset neg_rates; + struct ath_rateset neg_ht_rates; + struct ath_rate_softc *asc; +}; + +enum ath9k_internal_frame_type { + ATH9K_NOT_INTERNAL, + ATH9K_INT_PAUSE, + ATH9K_INT_UNPAUSE +}; + +struct ath_tx_info_priv { + struct ath_wiphy *aphy; + struct ath_tx_status tx; + int n_frames; + int n_bad_frames; + bool update_rc; + enum ath9k_internal_frame_type frame_type; +}; + +#define ATH_TX_INFO_PRIV(tx_info) \ + ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0])) + +void ath_rate_attach(struct ath_softc *sc); +u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate); +int ath_rate_control_register(void); +void ath_rate_control_unregister(void); + +#endif /* RC_H */ |