diff options
Diffstat (limited to 'drivers/net/wireless/ath/carl9170/tx.c')
-rw-r--r-- | drivers/net/wireless/ath/carl9170/tx.c | 133 |
1 files changed, 80 insertions, 53 deletions
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index ef4ec0da6e4..9c0b150d5b8 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1520,35 +1520,92 @@ void carl9170_tx_scheduler(struct ar9170 *ar) carl9170_tx(ar); } -int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +/* caller has to take rcu_read_lock */ +static struct carl9170_vif_info *carl9170_pick_beaconing_vif(struct ar9170 *ar) { - struct sk_buff *skb = NULL; struct carl9170_vif_info *cvif; + int i = 1; + + /* The AR9170 hardware has no fancy beacon queue or some + * other scheduling mechanism. So, the driver has to make + * due by setting the two beacon timers (pretbtt and tbtt) + * once and then swapping the beacon address in the HW's + * register file each time the pretbtt fires. + */ + + cvif = rcu_dereference(ar->beacon_iter); + if (ar->vifs > 0 && cvif) { + do { + list_for_each_entry_continue_rcu(cvif, &ar->vif_list, + list) { + if (cvif->active && cvif->enable_beacon) + goto out; + } + } while (ar->beacon_enabled && i--); + } + +out: + rcu_assign_pointer(ar->beacon_iter, cvif); + return cvif; +} + +static bool carl9170_tx_beacon_physet(struct ar9170 *ar, struct sk_buff *skb, + u32 *ht1, u32 *plcp) +{ struct ieee80211_tx_info *txinfo; struct ieee80211_tx_rate *rate; - __le32 *data, *old = NULL; - unsigned int plcp, power, chains; - u32 word, ht1, off, addr, len; - int i = 0, err = 0; + unsigned int power, chains; + bool ht_rate; - rcu_read_lock(); - cvif = rcu_dereference(ar->beacon_iter); -retry: - if (ar->vifs == 0 || !cvif) - goto out_unlock; + txinfo = IEEE80211_SKB_CB(skb); + rate = &txinfo->control.rates[0]; + ht_rate = !!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS); + carl9170_tx_rate_tpc_chains(ar, txinfo, rate, plcp, &power, &chains); - list_for_each_entry_continue_rcu(cvif, &ar->vif_list, list) { - if (cvif->active && cvif->enable_beacon) - goto found; + *ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; + if (chains == AR9170_TX_PHY_TXCHAIN_2) + *ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, *ht1, 7); + SET_VAL(AR9170_MAC_BCN_HT1_TPC, *ht1, power); + SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, *ht1, chains); + + if (ht_rate) { + *ht1 |= AR9170_MAC_BCN_HT1_HT_EN; + if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + *plcp |= AR9170_MAC_BCN_HT2_SGI; + + if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } else if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } + + SET_VAL(AR9170_MAC_BCN_HT2_LEN, *plcp, skb->len + FCS_LEN); + } else { + if (*plcp <= AR9170_TX_PHY_RATE_CCK_11M) + *plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; + else + *plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; } - if (!ar->beacon_enabled || i++) - goto out_unlock; + return ht_rate; +} - goto retry; +int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +{ + struct sk_buff *skb = NULL; + struct carl9170_vif_info *cvif; + __le32 *data, *old = NULL; + u32 word, ht1, plcp, off, addr, len; + int i = 0, err = 0; + bool ht_rate; -found: - rcu_assign_pointer(ar->beacon_iter, cvif); + rcu_read_lock(); + cvif = carl9170_pick_beaconing_vif(ar); + if (!cvif) + goto out_unlock; skb = ieee80211_beacon_get_tim(ar->hw, carl9170_get_vif(cvif), NULL, NULL); @@ -1558,7 +1615,6 @@ found: goto err_free; } - txinfo = IEEE80211_SKB_CB(skb); spin_lock_bh(&ar->beacon_lock); data = (__le32 *)skb->data; if (cvif->beacon) @@ -1588,43 +1644,14 @@ found: goto err_unlock; } - ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; - rate = &txinfo->control.rates[0]; - carl9170_tx_rate_tpc_chains(ar, txinfo, rate, &plcp, &power, &chains); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { - if (plcp <= AR9170_TX_PHY_RATE_CCK_11M) - plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; - else - plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; - } else { - ht1 |= AR9170_MAC_BCN_HT1_HT_EN; - if (rate->flags & IEEE80211_TX_RC_SHORT_GI) - plcp |= AR9170_MAC_BCN_HT2_SGI; - - if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - - SET_VAL(AR9170_MAC_BCN_HT2_LEN, plcp, skb->len + FCS_LEN); - } - - SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, ht1, 7); - SET_VAL(AR9170_MAC_BCN_HT1_TPC, ht1, power); - SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, ht1, chains); - if (chains == AR9170_TX_PHY_TXCHAIN_2) - ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + ht_rate = carl9170_tx_beacon_physet(ar, skb, &ht1, &plcp); carl9170_async_regwrite_begin(ar); carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT1, ht1); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) - carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); - else + if (ht_rate) carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT2, plcp); + else + carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { /* |