summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath5k/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath5k/phy.c')
-rw-r--r--drivers/net/wireless/ath5k/phy.c3197
1 files changed, 1645 insertions, 1552 deletions
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index 7ba18e09463..9e2faae5ae9 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -2,8 +2,9 @@
* PHY functions
*
* Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -26,1138 +27,193 @@
#include "ath5k.h"
#include "reg.h"
#include "base.h"
-
-/* Struct to hold initial RF register values (RF Banks) */
-struct ath5k_ini_rf {
- u8 rf_bank; /* check out ath5k_reg.h */
- u16 rf_register; /* register address */
- u32 rf_value[5]; /* register value for different modes (above) */
-};
-
-/*
- * Mode-specific RF Gain table (64bytes) for RF5111/5112
- * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial
- * RF Gain values are included in AR5K_AR5210_INI)
- */
-struct ath5k_ini_rfgain {
- u16 rfg_register; /* RF Gain register address */
- u32 rfg_value[2]; /* [freq (see below)] */
-};
-
-struct ath5k_gain_opt {
- u32 go_default;
- u32 go_steps_count;
- const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT];
-};
-
-/* RF5111 mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_5111[] = {
- { 0, 0x989c,
- /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 0, 0x989c,
- { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } },
- { 0, 0x989c,
- { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } },
- { 0, 0x98d4,
- { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } },
- { 1, 0x98d4,
- { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
- { 2, 0x98d4,
- { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } },
- { 3, 0x98d8,
- { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
- { 6, 0x989c,
- { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } },
- { 6, 0x989c,
- { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } },
- { 6, 0x989c,
- { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } },
- { 6, 0x989c,
- { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } },
- { 6, 0x989c,
- { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } },
- { 6, 0x98d4,
- { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } },
- { 7, 0x989c,
- { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } },
- { 7, 0x989c,
- { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
- { 7, 0x989c,
- { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
- { 7, 0x989c,
- { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } },
- { 7, 0x989c,
- { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } },
- { 7, 0x989c,
- { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } },
- { 7, 0x989c,
- { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } },
- { 7, 0x98cc,
- { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } },
-};
-
-/* Initial RF Gain settings for RF5111 */
-static const struct ath5k_ini_rfgain rfgain_5111[] = {
- /* 5Ghz 2Ghz */
- { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } },
- { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } },
- { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } },
- { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } },
- { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } },
- { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } },
- { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } },
- { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } },
- { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } },
- { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } },
- { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } },
- { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } },
- { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } },
- { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } },
- { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } },
- { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } },
- { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } },
- { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } },
- { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } },
- { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } },
- { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } },
- { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } },
- { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } },
- { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } },
- { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } },
- { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } },
- { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } },
- { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } },
- { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } },
- { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } },
- { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } },
- { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } },
- { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } },
- { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } },
- { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } },
- { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } },
- { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } },
- { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } },
- { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } },
- { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } },
- { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } },
- { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } },
- { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } },
- { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } },
- { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } },
- { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } },
- { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } },
- { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } },
- { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } },
- { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } },
- { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } },
- { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } },
-};
-
-static const struct ath5k_gain_opt rfgain_opt_5111 = {
- 4,
- 9,
- {
- { { 4, 1, 1, 1 }, 6 },
- { { 4, 0, 1, 1 }, 4 },
- { { 3, 1, 1, 1 }, 3 },
- { { 4, 0, 0, 1 }, 1 },
- { { 4, 1, 1, 0 }, 0 },
- { { 4, 0, 1, 0 }, -2 },
- { { 3, 1, 1, 0 }, -3 },
- { { 4, 0, 0, 0 }, -4 },
- { { 2, 1, 1, 0 }, -6 }
- }
-};
-
-/* RF5112 mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_5112[] = {
- { 1, 0x98d4,
- /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
- { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
- { 2, 0x98d0,
- { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
- { 3, 0x98dc,
- { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
- { 6, 0x989c,
- { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } },
- { 6, 0x989c,
- { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } },
- { 6, 0x989c,
- { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } },
- { 6, 0x989c,
- { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } },
- { 6, 0x989c,
- { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
- { 6, 0x989c,
- { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
- { 6, 0x989c,
- { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } },
- { 6, 0x989c,
- { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } },
- { 6, 0x989c,
- { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
- { 6, 0x989c,
- { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
- { 6, 0x989c,
- { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } },
- { 6, 0x989c,
- { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } },
- { 6, 0x989c,
- { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
- { 6, 0x989c,
- { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } },
- { 6, 0x989c,
- { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
- { 6, 0x989c,
- { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
- { 6, 0x989c,
- { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } },
- { 6, 0x989c,
- { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } },
- { 6, 0x989c,
- { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
- { 6, 0x989c,
- { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } },
- { 6, 0x989c,
- { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } },
- { 6, 0x989c,
- { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } },
- { 6, 0x989c,
- { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } },
- { 6, 0x989c,
- { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } },
- { 6, 0x989c,
- { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } },
- { 6, 0x989c,
- { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } },
- { 6, 0x989c,
- { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } },
- { 6, 0x989c,
- { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } },
- { 6, 0x989c,
- { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } },
- { 6, 0x98d0,
- { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } },
- { 7, 0x989c,
- { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
- { 7, 0x989c,
- { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
- { 7, 0x989c,
- { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } },
- { 7, 0x989c,
- { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
- { 7, 0x989c,
- { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } },
- { 7, 0x989c,
- { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
- { 7, 0x989c,
- { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
- { 7, 0x989c,
- { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } },
- { 7, 0x989c,
- { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } },
- { 7, 0x989c,
- { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
- { 7, 0x989c,
- { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
- { 7, 0x989c,
- { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
- { 7, 0x98c4,
- { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
-};
-
-/* RF5112A mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_5112a[] = {
- { 1, 0x98d4,
- /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
- { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
- { 2, 0x98d0,
- { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
- { 3, 0x98dc,
- { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
- { 6, 0x989c,
- { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } },
- { 6, 0x989c,
- { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
- { 6, 0x989c,
- { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } },
- { 6, 0x989c,
- { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } },
- { 6, 0x989c,
- { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } },
- { 6, 0x989c,
- { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } },
- { 6, 0x989c,
- { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } },
- { 6, 0x989c,
- { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } },
- { 6, 0x989c,
- { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } },
- { 6, 0x989c,
- { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
- { 6, 0x989c,
- { 0x00190000, 0x00190000, 0x00190000, 0x00190000, 0x00190000 } },
- { 6, 0x989c,
- { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
- { 6, 0x989c,
- { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } },
- { 6, 0x989c,
- { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } },
- { 6, 0x989c,
- { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } },
- { 6, 0x989c,
- { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
- { 6, 0x989c,
- { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
- { 6, 0x989c,
- { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } },
- { 6, 0x989c,
- { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } },
- { 6, 0x989c,
- { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
- { 6, 0x989c,
- { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } },
- { 6, 0x989c,
- { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } },
- { 6, 0x989c,
- { 0x00020080, 0x00020080, 0x00020080, 0x00020080, 0x00020080 } },
- { 6, 0x989c,
- { 0x00080009, 0x00080009, 0x00080009, 0x00080009, 0x00080009 } },
- { 6, 0x989c,
- { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } },
- { 6, 0x989c,
- { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } },
- { 6, 0x989c,
- { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } },
- { 6, 0x989c,
- { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } },
- { 6, 0x989c,
- { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } },
- { 6, 0x98d8,
- { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } },
- { 7, 0x989c,
- { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
- { 7, 0x989c,
- { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
- { 7, 0x989c,
- { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } },
- { 7, 0x989c,
- { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
- { 7, 0x989c,
- { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } },
- { 7, 0x989c,
- { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
- { 7, 0x989c,
- { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
- { 7, 0x989c,
- { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } },
- { 7, 0x989c,
- { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } },
- { 7, 0x989c,
- { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
- { 7, 0x989c,
- { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
- { 7, 0x989c,
- { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
- { 7, 0x98c4,
- { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
-};
-
-
-static const struct ath5k_ini_rf rfregs_2112a[] = {
- { 1, AR5K_RF_BUFFER_CONTROL_4,
- /* mode b mode g mode gTurbo */
- { 0x00000020, 0x00000020, 0x00000020 } },
- { 2, AR5K_RF_BUFFER_CONTROL_3,
- { 0x03060408, 0x03060408, 0x03070408 } },
- { 3, AR5K_RF_BUFFER_CONTROL_6,
- { 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
- { 6, AR5K_RF_BUFFER,
- { 0x0a000000, 0x0a000000, 0x0a000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00800000, 0x00800000, 0x00800000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x002a0000, 0x002a0000, 0x002a0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00010000, 0x00010000, 0x00010000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00180000, 0x00180000, 0x00180000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x006e0000, 0x006e0000, 0x006e0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00c70000, 0x00c70000, 0x00c70000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x004b0000, 0x004b0000, 0x004b0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x04480000, 0x04480000, 0x04480000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x002a0000, 0x002a0000, 0x002a0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00e40000, 0x00e40000, 0x00e40000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x043f0000, 0x043f0000, 0x043f0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x0c0c0000, 0x0c0c0000, 0x0c0c0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x02190000, 0x02190000, 0x02190000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00240000, 0x00240000, 0x00240000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00b40000, 0x00b40000, 0x00b40000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00990000, 0x00990000, 0x00990000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00500000, 0x00500000, 0x00500000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x002a0000, 0x002a0000, 0x002a0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00120000, 0x00120000, 0x00120000 } },
- { 6, AR5K_RF_BUFFER,
- { 0xc0320000, 0xc0320000, 0xc0320000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x01740000, 0x01740000, 0x01740000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00110000, 0x00110000, 0x00110000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x86280000, 0x86280000, 0x86280000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x31840000, 0x31840000, 0x31840000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00f20080, 0x00f20080, 0x00f20080 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00070019, 0x00070019, 0x00070019 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x000000b2, 0x000000b2, 0x000000b2 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00b02184, 0x00b02184, 0x00b02184 } },
- { 6, AR5K_RF_BUFFER,
- { 0x004125a4, 0x004125a4, 0x004125a4 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00119220, 0x00119220, 0x00119220 } },
- { 6, AR5K_RF_BUFFER,
- { 0x001a4800, 0x001a4800, 0x001a4800 } },
- { 6, AR5K_RF_BUFFER_CONTROL_5,
- { 0x000b0230, 0x000b0230, 0x000b0230 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000094, 0x00000094, 0x00000094 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000091, 0x00000091, 0x00000091 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000012, 0x00000012, 0x00000012 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000080, 0x00000080, 0x00000080 } },
- { 7, AR5K_RF_BUFFER,
- { 0x000000d9, 0x000000d9, 0x000000d9 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000060, 0x00000060, 0x00000060 } },
- { 7, AR5K_RF_BUFFER,
- { 0x000000f0, 0x000000f0, 0x000000f0 } },
- { 7, AR5K_RF_BUFFER,
- { 0x000000a2, 0x000000a2, 0x000000a2 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000052, 0x00000052, 0x00000052 } },
- { 7, AR5K_RF_BUFFER,
- { 0x000000d4, 0x000000d4, 0x000000d4 } },
- { 7, AR5K_RF_BUFFER,
- { 0x000014cc, 0x000014cc, 0x000014cc } },
- { 7, AR5K_RF_BUFFER,
- { 0x0000048c, 0x0000048c, 0x0000048c } },
- { 7, AR5K_RF_BUFFER_CONTROL_1,
- { 0x00000003, 0x00000003, 0x00000003 } },
-};
-
-/* RF5413/5414 mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_5413[] = {
- { 1, 0x98d4,
- /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
- { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
- { 2, 0x98d0,
- { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
- { 3, 0x98dc,
- { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } },
- { 6, 0x989c,
- { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } },
- { 6, 0x989c,
- { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } },
- { 6, 0x989c,
- { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } },
- { 6, 0x989c,
- { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
- { 6, 0x989c,
- { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
- { 6, 0x989c,
- { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
- { 6, 0x989c,
- { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } },
- { 6, 0x989c,
- { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } },
- { 6, 0x989c,
- { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
- { 6, 0x989c,
- { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } },
- { 6, 0x989c,
- { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } },
- { 6, 0x989c,
- { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } },
- { 6, 0x989c,
- { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
- { 6, 0x989c,
- { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } },
- { 6, 0x989c,
- { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
- { 6, 0x989c,
- { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } },
- { 6, 0x989c,
- { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } },
- { 6, 0x989c,
- { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } },
- { 6, 0x989c,
- { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } },
- { 6, 0x989c,
- { 0x00510040, 0x00510040, 0x005100a0, 0x005100a0, 0x005100a0 } },
- { 6, 0x989c,
- { 0x0050006a, 0x0050006a, 0x005000dd, 0x005000dd, 0x005000dd } },
- { 6, 0x989c,
- { 0x00000001, 0x00000001, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } },
- { 6, 0x989c,
- { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
- { 6, 0x989c,
- { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } },
- { 6, 0x989c,
- { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00003600 } },
- { 6, 0x98c8,
- { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } },
- { 7, 0x989c,
- { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
- { 7, 0x989c,
- { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
- { 7, 0x98cc,
- { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
-};
-
-/* RF2413/2414 mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_2413[] = {
- { 1, AR5K_RF_BUFFER_CONTROL_4,
- /* mode b mode g mode gTurbo */
- { 0x00000020, 0x00000020, 0x00000020 } },
- { 2, AR5K_RF_BUFFER_CONTROL_3,
- { 0x02001408, 0x02001408, 0x02001408 } },
- { 3, AR5K_RF_BUFFER_CONTROL_6,
- { 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
- { 6, AR5K_RF_BUFFER,
- { 0xf0000000, 0xf0000000, 0xf0000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x03000000, 0x03000000, 0x03000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x40400000, 0x40400000, 0x40400000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x65050000, 0x65050000, 0x65050000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00420000, 0x00420000, 0x00420000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00b50000, 0x00b50000, 0x00b50000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00030000, 0x00030000, 0x00030000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00f70000, 0x00f70000, 0x00f70000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x009d0000, 0x009d0000, 0x009d0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00220000, 0x00220000, 0x00220000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x04220000, 0x04220000, 0x04220000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00230018, 0x00230018, 0x00230018 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00280050, 0x00280050, 0x00280050 } },
- { 6, AR5K_RF_BUFFER,
- { 0x005000c3, 0x005000c3, 0x005000c3 } },
- { 6, AR5K_RF_BUFFER,
- { 0x0004007f, 0x0004007f, 0x0004007f } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000458, 0x00000458, 0x00000458 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x0000c000, 0x0000c000, 0x0000c000 } },
- { 6, AR5K_RF_BUFFER_CONTROL_5,
- { 0x00400230, 0x00400230, 0x00400230 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00006400, 0x00006400, 0x00006400 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000800, 0x00000800, 0x00000800 } },
- { 7, AR5K_RF_BUFFER_CONTROL_2,
- { 0x0000000e, 0x0000000e, 0x0000000e } },
-};
-
-/* RF2425 mode-specific init registers */
-static const struct ath5k_ini_rf rfregs_2425[] = {
- { 1, AR5K_RF_BUFFER_CONTROL_4,
- /* mode g mode gTurbo */
- { 0x00000020, 0x00000020 } },
- { 2, AR5K_RF_BUFFER_CONTROL_3,
- { 0x02001408, 0x02001408 } },
- { 3, AR5K_RF_BUFFER_CONTROL_6,
- { 0x00e020c0, 0x00e020c0 } },
- { 6, AR5K_RF_BUFFER,
- { 0x10000000, 0x10000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x002a0000, 0x002a0000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00100000, 0x00100000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00020000, 0x00020000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00730000, 0x00730000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00f80000, 0x00f80000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00e70000, 0x00e70000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00140000, 0x00140000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00910040, 0x00910040 } },
- { 6, AR5K_RF_BUFFER,
- { 0x0007001a, 0x0007001a } },
- { 6, AR5K_RF_BUFFER,
- { 0x00410000, 0x00410000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00810060, 0x00810060 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00020803, 0x00020803 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00000000, 0x00000000 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00001660, 0x00001660 } },
- { 6, AR5K_RF_BUFFER,
- { 0x00001688, 0x00001688 } },
- { 6, AR5K_RF_BUFFER_CONTROL_1,
- { 0x00000001, 0x00000001 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00006400, 0x00006400 } },
- { 7, AR5K_RF_BUFFER,
- { 0x00000800, 0x00000800 } },
- { 7, AR5K_RF_BUFFER_CONTROL_2,
- { 0x0000000e, 0x0000000e } },
-};
-
-/* Initial RF Gain settings for RF5112 */
-static const struct ath5k_ini_rfgain rfgain_5112[] = {
- /* 5Ghz 2Ghz */
- { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } },
- { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } },
- { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } },
- { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } },
- { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } },
- { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } },
- { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } },
- { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } },
- { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } },
- { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } },
- { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } },
- { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } },
- { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } },
- { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } },
- { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } },
- { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } },
- { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } },
- { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } },
- { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } },
- { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } },
- { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } },
- { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } },
- { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } },
- { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } },
- { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } },
- { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } },
- { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } },
- { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } },
- { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } },
- { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } },
- { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } },
- { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } },
- { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } },
- { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } },
- { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } },
- { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } },
- { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } },
- { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } },
- { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } },
- { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } },
- { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } },
- { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } },
- { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } },
- { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } },
- { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } },
- { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } },
- { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } },
- { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } },
- { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } },
- { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } },
- { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } },
- { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } },
- { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } },
- { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } },
- { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } },
- { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } },
-};
-
-/* Initial RF Gain settings for RF5413 */
-static const struct ath5k_ini_rfgain rfgain_5413[] = {
- /* 5Ghz 2Ghz */
- { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
- { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } },
- { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } },
- { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } },
- { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } },
- { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } },
- { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } },
- { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } },
- { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } },
- { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } },
- { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } },
- { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } },
- { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } },
- { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } },
- { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } },
- { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } },
- { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } },
- { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } },
- { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } },
- { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } },
- { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } },
- { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } },
- { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } },
- { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } },
- { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } },
- { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } },
- { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } },
- { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } },
- { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } },
- { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } },
- { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } },
- { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } },
- { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } },
- { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } },
- { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } },
- { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } },
- { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } },
- { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } },
- { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } },
- { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } },
- { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } },
-};
-
-/* Initial RF Gain settings for RF2413 */
-static const struct ath5k_ini_rfgain rfgain_2413[] = {
- { AR5K_RF_GAIN(0), { 0x00000000 } },
- { AR5K_RF_GAIN(1), { 0x00000040 } },
- { AR5K_RF_GAIN(2), { 0x00000080 } },
- { AR5K_RF_GAIN(3), { 0x00000181 } },
- { AR5K_RF_GAIN(4), { 0x000001c1 } },
- { AR5K_RF_GAIN(5), { 0x00000001 } },
- { AR5K_RF_GAIN(6), { 0x00000041 } },
- { AR5K_RF_GAIN(7), { 0x00000081 } },
- { AR5K_RF_GAIN(8), { 0x00000168 } },
- { AR5K_RF_GAIN(9), { 0x000001a8 } },
- { AR5K_RF_GAIN(10), { 0x000001e8 } },
- { AR5K_RF_GAIN(11), { 0x00000028 } },
- { AR5K_RF_GAIN(12), { 0x00000068 } },
- { AR5K_RF_GAIN(13), { 0x00000189 } },
- { AR5K_RF_GAIN(14), { 0x000001c9 } },
- { AR5K_RF_GAIN(15), { 0x00000009 } },
- { AR5K_RF_GAIN(16), { 0x00000049 } },
- { AR5K_RF_GAIN(17), { 0x00000089 } },
- { AR5K_RF_GAIN(18), { 0x00000190 } },
- { AR5K_RF_GAIN(19), { 0x000001d0 } },
- { AR5K_RF_GAIN(20), { 0x00000010 } },
- { AR5K_RF_GAIN(21), { 0x00000050 } },
- { AR5K_RF_GAIN(22), { 0x00000090 } },
- { AR5K_RF_GAIN(23), { 0x00000191 } },
- { AR5K_RF_GAIN(24), { 0x000001d1 } },
- { AR5K_RF_GAIN(25), { 0x00000011 } },
- { AR5K_RF_GAIN(26), { 0x00000051 } },
- { AR5K_RF_GAIN(27), { 0x00000091 } },
- { AR5K_RF_GAIN(28), { 0x00000178 } },
- { AR5K_RF_GAIN(29), { 0x000001b8 } },
- { AR5K_RF_GAIN(30), { 0x000001f8 } },
- { AR5K_RF_GAIN(31), { 0x00000038 } },
- { AR5K_RF_GAIN(32), { 0x00000078 } },
- { AR5K_RF_GAIN(33), { 0x00000199 } },
- { AR5K_RF_GAIN(34), { 0x000001d9 } },
- { AR5K_RF_GAIN(35), { 0x00000019 } },
- { AR5K_RF_GAIN(36), { 0x00000059 } },
- { AR5K_RF_GAIN(37), { 0x00000099 } },
- { AR5K_RF_GAIN(38), { 0x000000d9 } },
- { AR5K_RF_GAIN(39), { 0x000000f9 } },
- { AR5K_RF_GAIN(40), { 0x000000f9 } },
- { AR5K_RF_GAIN(41), { 0x000000f9 } },
- { AR5K_RF_GAIN(42), { 0x000000f9 } },
- { AR5K_RF_GAIN(43), { 0x000000f9 } },
- { AR5K_RF_GAIN(44), { 0x000000f9 } },
- { AR5K_RF_GAIN(45), { 0x000000f9 } },
- { AR5K_RF_GAIN(46), { 0x000000f9 } },
- { AR5K_RF_GAIN(47), { 0x000000f9 } },
- { AR5K_RF_GAIN(48), { 0x000000f9 } },
- { AR5K_RF_GAIN(49), { 0x000000f9 } },
- { AR5K_RF_GAIN(50), { 0x000000f9 } },
- { AR5K_RF_GAIN(51), { 0x000000f9 } },
- { AR5K_RF_GAIN(52), { 0x000000f9 } },
- { AR5K_RF_GAIN(53), { 0x000000f9 } },
- { AR5K_RF_GAIN(54), { 0x000000f9 } },
- { AR5K_RF_GAIN(55), { 0x000000f9 } },
- { AR5K_RF_GAIN(56), { 0x000000f9 } },
- { AR5K_RF_GAIN(57), { 0x000000f9 } },
- { AR5K_RF_GAIN(58), { 0x000000f9 } },
- { AR5K_RF_GAIN(59), { 0x000000f9 } },
- { AR5K_RF_GAIN(60), { 0x000000f9 } },
- { AR5K_RF_GAIN(61), { 0x000000f9 } },
- { AR5K_RF_GAIN(62), { 0x000000f9 } },
- { AR5K_RF_GAIN(63), { 0x000000f9 } },
-};
-
-/* Initial RF Gain settings for RF2425 */
-static const struct ath5k_ini_rfgain rfgain_2425[] = {
- { AR5K_RF_GAIN(0), { 0x00000000 } },
- { AR5K_RF_GAIN(1), { 0x00000040 } },
- { AR5K_RF_GAIN(2), { 0x00000080 } },
- { AR5K_RF_GAIN(3), { 0x00000181 } },
- { AR5K_RF_GAIN(4), { 0x000001c1 } },
- { AR5K_RF_GAIN(5), { 0x00000001 } },
- { AR5K_RF_GAIN(6), { 0x00000041 } },
- { AR5K_RF_GAIN(7), { 0x00000081 } },
- { AR5K_RF_GAIN(8), { 0x00000188 } },
- { AR5K_RF_GAIN(9), { 0x000001c8 } },
- { AR5K_RF_GAIN(10), { 0x00000008 } },
- { AR5K_RF_GAIN(11), { 0x00000048 } },
- { AR5K_RF_GAIN(12), { 0x00000088 } },
- { AR5K_RF_GAIN(13), { 0x00000189 } },
- { AR5K_RF_GAIN(14), { 0x000001c9 } },
- { AR5K_RF_GAIN(15), { 0x00000009 } },
- { AR5K_RF_GAIN(16), { 0x00000049 } },
- { AR5K_RF_GAIN(17), { 0x00000089 } },
- { AR5K_RF_GAIN(18), { 0x000001b0 } },
- { AR5K_RF_GAIN(19), { 0x000001f0 } },
- { AR5K_RF_GAIN(20), { 0x00000030 } },
- { AR5K_RF_GAIN(21), { 0x00000070 } },
- { AR5K_RF_GAIN(22), { 0x00000171 } },
- { AR5K_RF_GAIN(23), { 0x000001b1 } },
- { AR5K_RF_GAIN(24), { 0x000001f1 } },
- { AR5K_RF_GAIN(25), { 0x00000031 } },
- { AR5K_RF_GAIN(26), { 0x00000071 } },
- { AR5K_RF_GAIN(27), { 0x000001b8 } },
- { AR5K_RF_GAIN(28), { 0x000001f8 } },
- { AR5K_RF_GAIN(29), { 0x00000038 } },
- { AR5K_RF_GAIN(30), { 0x00000078 } },
- { AR5K_RF_GAIN(31), { 0x000000b8 } },
- { AR5K_RF_GAIN(32), { 0x000001b9 } },
- { AR5K_RF_GAIN(33), { 0x000001f9 } },
- { AR5K_RF_GAIN(34), { 0x00000039 } },
- { AR5K_RF_GAIN(35), { 0x00000079 } },
- { AR5K_RF_GAIN(36), { 0x000000b9 } },
- { AR5K_RF_GAIN(37), { 0x000000f9 } },
- { AR5K_RF_GAIN(38), { 0x000000f9 } },
- { AR5K_RF_GAIN(39), { 0x000000f9 } },
- { AR5K_RF_GAIN(40), { 0x000000f9 } },
- { AR5K_RF_GAIN(41), { 0x000000f9 } },
- { AR5K_RF_GAIN(42), { 0x000000f9 } },
- { AR5K_RF_GAIN(43), { 0x000000f9 } },
- { AR5K_RF_GAIN(44), { 0x000000f9 } },
- { AR5K_RF_GAIN(45), { 0x000000f9 } },
- { AR5K_RF_GAIN(46), { 0x000000f9 } },
- { AR5K_RF_GAIN(47), { 0x000000f9 } },
- { AR5K_RF_GAIN(48), { 0x000000f9 } },
- { AR5K_RF_GAIN(49), { 0x000000f9 } },
- { AR5K_RF_GAIN(50), { 0x000000f9 } },
- { AR5K_RF_GAIN(51), { 0x000000f9 } },
- { AR5K_RF_GAIN(52), { 0x000000f9 } },
- { AR5K_RF_GAIN(53), { 0x000000f9 } },
- { AR5K_RF_GAIN(54), { 0x000000f9 } },
- { AR5K_RF_GAIN(55), { 0x000000f9 } },
- { AR5K_RF_GAIN(56), { 0x000000f9 } },
- { AR5K_RF_GAIN(57), { 0x000000f9 } },
- { AR5K_RF_GAIN(58), { 0x000000f9 } },
- { AR5K_RF_GAIN(59), { 0x000000f9 } },
- { AR5K_RF_GAIN(60), { 0x000000f9 } },
- { AR5K_RF_GAIN(61), { 0x000000f9 } },
- { AR5K_RF_GAIN(62), { 0x000000f9 } },
- { AR5K_RF_GAIN(63), { 0x000000f9 } },
-};
-
-static const struct ath5k_gain_opt rfgain_opt_5112 = {
- 1,
- 8,
- {
- { { 3, 0, 0, 0, 0, 0, 0 }, 6 },
- { { 2, 0, 0, 0, 0, 0, 0 }, 0 },
- { { 1, 0, 0, 0, 0, 0, 0 }, -3 },
- { { 0, 0, 0, 0, 0, 0, 0 }, -6 },
- { { 0, 1, 1, 0, 0, 0, 0 }, -8 },
- { { 0, 1, 1, 0, 1, 1, 0 }, -10 },
- { { 0, 1, 0, 1, 1, 1, 0 }, -13 },
- { { 0, 1, 0, 1, 1, 0, 1 }, -16 },
- }
-};
+#include "rfbuffer.h"
+#include "rfgain.h"
/*
* Used to modify RF Banks before writing them to AR5K_RF_BUFFER
*/
-static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits,
- u32 first, u32 col, bool set)
+static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
+ const struct ath5k_rf_reg *rf_regs,
+ u32 val, u8 reg_id, bool set)
{
- u32 mask, entry, last, data, shift, position;
- s32 left;
+ const struct ath5k_rf_reg *rfreg = NULL;
+ u8 offset, bank, num_bits, col, position;
+ u16 entry;
+ u32 mask, data, last_bit, bits_shifted, first_bit;
+ u32 *rfb;
+ s32 bits_left;
int i;
data = 0;
+ rfb = ah->ah_rf_banks;
- if (rf == NULL)
+ for (i = 0; i < ah->ah_rf_regs_count; i++) {
+ if (rf_regs[i].index == reg_id) {
+ rfreg = &rf_regs[i];
+ break;
+ }
+ }
+
+ if (rfb == NULL || rfreg == NULL) {
+ ATH5K_PRINTF("Rf register not found!\n");
/* should not happen */
return 0;
+ }
- if (!(col <= 3 && bits <= 32 && first + bits <= 319)) {
+ bank = rfreg->bank;
+ num_bits = rfreg->field.len;
+ first_bit = rfreg->field.pos;
+ col = rfreg->field.col;
+
+ /* first_bit is an offset from bank's
+ * start. Since we have all banks on
+ * the same array, we use this offset
+ * to mark each bank's start */
+ offset = ah->ah_offset[bank];
+
+ /* Boundary check */
+ if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) {
ATH5K_PRINTF("invalid values at offset %u\n", offset);
return 0;
}
- entry = ((first - 1) / 8) + offset;
- position = (first - 1) % 8;
+ entry = ((first_bit - 1) / 8) + offset;
+ position = (first_bit - 1) % 8;
if (set)
- data = ath5k_hw_bitswap(reg, bits);
+ data = ath5k_hw_bitswap(val, num_bits);
+
+ for (bits_shifted = 0, bits_left = num_bits; bits_left > 0;
+ position = 0, entry++) {
+
+ last_bit = (position + bits_left > 8) ? 8 :
+ position + bits_left;
- for (i = shift = 0, left = bits; left > 0; position = 0, entry++, i++) {
- last = (position + left > 8) ? 8 : position + left;
- mask = (((1 << last) - 1) ^ ((1 << position) - 1)) << (col * 8);
+ mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) <<
+ (col * 8);
if (set) {
- rf[entry] &= ~mask;
- rf[entry] |= ((data << position) << (col * 8)) & mask;
+ rfb[entry] &= ~mask;
+ rfb[entry] |= ((data << position) << (col * 8)) & mask;
data >>= (8 - position);
} else {
- data = (((rf[entry] & mask) >> (col * 8)) >> position)
- << shift;
- shift += last - position;
+ data |= (((rfb[entry] & mask) >> (col * 8)) >> position)
+ << bits_shifted;
+ bits_shifted += last_bit - position;
}
- left -= 8 - position;
+ bits_left -= 8 - position;
}
- data = set ? 1 : ath5k_hw_bitswap(data, bits);
+ data = set ? 1 : ath5k_hw_bitswap(data, num_bits);
return data;
}
-static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
+/**********************\
+* RF Gain optimization *
+\**********************/
+
+/*
+ * This code is used to optimize rf gain on different environments
+ * (temprature mostly) based on feedback from a power detector.
+ *
+ * It's only used on RF5111 and RF5112, later RF chips seem to have
+ * auto adjustment on hw -notice they have a much smaller BANK 7 and
+ * no gain optimization ladder-.
+ *
+ * For more infos check out this patent doc
+ * http://www.freepatentsonline.com/7400691.html
+ *
+ * This paper describes power drops as seen on the receiver due to
+ * probe packets
+ * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
+ * %20of%20Power%20Control.pdf
+ *
+ * And this is the MadWiFi bug entry related to the above
+ * http://madwifi-project.org/ticket/1659
+ * with various measurements and diagrams
+ *
+ * TODO: Deal with power drops due to probes by setting an apropriate
+ * tx power on the probe packets ! Make this part of the calibration process.
+ */
+
+/* Initialize ah_gain durring attach */
+int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
+{
+ /* Initialize the gain optimization values */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 35;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ case AR5K_RF5112:
+ ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 85;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Schedule a gain probe check on the next transmited packet.
+ * That means our next packet is going to be sent with lower
+ * tx power and a Peak to Average Power Detector (PAPD) will try
+ * to measure the gain.
+ *
+ * TODO: Use propper tx power setting for the probe packet so
+ * that we don't observe a serious power drop on the receiver
+ *
+ * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
+ * just after we enable the probe so that we don't mess with
+ * standard traffic ? Maybe it's time to use sw interrupts and
+ * a probe tasklet !!!
+ */
+static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
+{
+
+ /* Skip if gain calibration is inactive or
+ * we already handle a probe request */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)
+ return;
+
+ /* Send the packet with 2dB below max power as
+ * patent doc suggest */
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+ AR5K_PHY_PAPD_PROBE_TXPOWER) |
+ AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
+
+ ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED;
+
+}
+
+/* Calculate gain_F measurement correction
+ * based on the current step for RF5112 rev. 2 */
+static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
{
u32 mix, step;
u32 *rf;
+ const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
+ const struct ath5k_rf_reg *rf_regs;
+
+ /* Only RF5112 Rev. 2 supports it */
+ if ((ah->ah_radio != AR5K_RF5112) ||
+ (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A))
+ return 0;
+
+ go = &rfgain_opt_5112;
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
if (ah->ah_rf_banks == NULL)
return 0;
@@ -1165,11 +221,15 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
rf = ah->ah_rf_banks;
ah->ah_gain.g_f_corr = 0;
- if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1)
+ /* No VGA (Variable Gain Amplifier) override, skip */
+ if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, false) != 1)
return 0;
- step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false);
- mix = ah->ah_gain.g_step->gos_param[0];
+ /* Mix gain stepping */
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, false);
+
+ /* Mix gain override */
+ mix = g_step->gos_param[0];
switch (mix) {
case 3:
@@ -1189,9 +249,14 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
return ah->ah_gain.g_f_corr;
}
-static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
+/* Check if current gain_F measurement is in the range of our
+ * power detector windows. If we get a measurement outside range
+ * we know it's not accurate (detectors can't measure anything outside
+ * their detection window) so we must ignore it */
+static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
{
- u32 step, mix, level[4];
+ const struct ath5k_rf_reg *rf_regs;
+ u32 step, mix_ovr, level[4];
u32 *rf;
if (ah->ah_rf_banks == NULL)
@@ -1200,23 +265,33 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
rf = ah->ah_rf_banks;
if (ah->ah_radio == AR5K_RF5111) {
- step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0,
- false);
+
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP,
+ false);
+
level[0] = 0;
- level[1] = (step == 0x3f) ? 0x32 : step + 4;
- level[2] = (step != 0x3f) ? 0x40 : level[0];
- level[3] = level[2] + 0x32;
+ level[1] = (step == 63) ? 50 : step + 4;
+ level[2] = (step != 63) ? 64 : level[0];
+ level[3] = level[2] + 50 ;
ah->ah_gain.g_high = level[3] -
- (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
ah->ah_gain.g_low = level[0] +
- (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
} else {
- mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,
- false);
+
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+
+ mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR,
+ false);
+
level[0] = level[2] = 0;
- if (mix == 1) {
+ if (mix_ovr == 1) {
level[1] = level[3] = 83;
} else {
level[1] = level[3] = 107;
@@ -1230,9 +305,12 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
ah->ah_gain.g_current <= level[3]);
}
-static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
+/* Perform gain_F adjustment by choosing the right set
+ * of parameters from rf gain optimization ladder */
+static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
{
const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
int ret = 0;
switch (ah->ah_radio) {
@@ -1246,35 +324,39 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
return 0;
}
- ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx];
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {
+
+ /* Reached maximum */
if (ah->ah_gain.g_step_idx == 0)
return -1;
+
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
ah->ah_gain.g_target >= ah->ah_gain.g_high &&
ah->ah_gain.g_step_idx > 0;
- ah->ah_gain.g_step =
- &go->go_step[ah->ah_gain.g_step_idx])
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
ah->ah_gain.g_target -= 2 *
(go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -
- ah->ah_gain.g_step->gos_gain);
+ g_step->gos_gain);
ret = 1;
goto done;
}
if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {
+
+ /* Reached minimum */
if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))
return -2;
+
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
ah->ah_gain.g_target <= ah->ah_gain.g_low &&
ah->ah_gain.g_step_idx < go->go_steps_count-1;
- ah->ah_gain.g_step =
- &go->go_step[ah->ah_gain.g_step_idx])
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
ah->ah_gain.g_target -= 2 *
(go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
- ah->ah_gain.g_step->gos_gain);
+ g_step->gos_gain);
ret = 2;
goto done;
@@ -1289,468 +371,449 @@ done:
return ret;
}
-/*
- * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111
- */
-static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, unsigned int mode)
+/* Main callback for thermal rf gain calibration engine
+ * Check for a new gain reading and schedule an adjustment
+ * if needed.
+ *
+ * TODO: Use sw interrupt to schedule reset if gain_F needs
+ * adjustment */
+enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
{
+ u32 data, type;
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 *rf;
- const unsigned int rf_size = ARRAY_SIZE(rfregs_5111);
- unsigned int i;
- int obdb = -1, bank = -1;
- u32 ee_mode;
-
- AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX);
-
- rf = ah->ah_rf_banks;
-
- /* Copy values to modify them */
- for (i = 0; i < rf_size; i++) {
- if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) {
- ATH5K_ERR(ah->ah_sc, "invalid bank\n");
- return -EINVAL;
- }
- if (bank != rfregs_5111[i].rf_bank) {
- bank = rfregs_5111[i].rf_bank;
- ah->ah_offset[bank] = i;
- }
+ ATH5K_TRACE(ah->ah_sc);
- rf[i] = rfregs_5111[i].rf_value[mode];
- }
+ if (ah->ah_rf_banks == NULL ||
+ ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE)
+ return AR5K_RFGAIN_INACTIVE;
- /* Modify bank 0 */
- if (channel->hw_value & CHANNEL_2GHZ) {
- if (channel->hw_value & CHANNEL_CCK)
- ee_mode = AR5K_EEPROM_MODE_11B;
- else
- ee_mode = AR5K_EEPROM_MODE_11G;
- obdb = 0;
+ /* No check requested, either engine is inactive
+ * or an adjustment is already requested */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED)
+ goto done;
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0],
- ee->ee_ob[ee_mode][obdb], 3, 119, 0, true))
- return -EINVAL;
+ /* Read the PAPD (Peak to Average Power Detector)
+ * register */
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0],
- ee->ee_ob[ee_mode][obdb], 3, 122, 0, true))
- return -EINVAL;
+ /* No probe is scheduled, read gain_F measurement */
+ if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
+ ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
+ type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
- obdb = 1;
- /* Modify bank 6 */
- } else {
- /* For 11a, Turbo and XR */
- ee_mode = AR5K_EEPROM_MODE_11A;
- obdb = channel->center_freq >= 5725 ? 3 :
- (channel->center_freq >= 5500 ? 2 :
- (channel->center_freq >= 5260 ? 1 :
- (channel->center_freq > 4000 ? 0 : -1)));
+ /* If tx packet is CCK correct the gain_F measurement
+ * by cck ofdm gain delta */
+ if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) {
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
+ ah->ah_gain.g_current +=
+ ee->ee_cck_ofdm_gain_delta;
+ else
+ ah->ah_gain.g_current +=
+ AR5K_GAIN_CCK_PROBE_CORR;
+ }
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_pwd_84, 1, 51, 3, true))
- return -EINVAL;
+ /* Further correct gain_F measurement for
+ * RF5112A radios */
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ ath5k_hw_rf_gainf_corr(ah);
+ ah->ah_gain.g_current =
+ ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
+ (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
+ 0;
+ }
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_pwd_90, 1, 45, 3, true))
- return -EINVAL;
+ /* Check if measurement is ok and if we need
+ * to adjust gain, schedule a gain adjustment,
+ * else switch back to the acive state */
+ if (ath5k_hw_rf_check_gainf_readback(ah) &&
+ AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
+ ath5k_hw_rf_gainf_adjust(ah)) {
+ ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE;
+ } else {
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ }
}
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- !ee->ee_xpd[ee_mode], 1, 95, 0, true))
- return -EINVAL;
-
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_x_gain[ee_mode], 4, 96, 0, true))
- return -EINVAL;
-
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ?
- ee->ee_ob[ee_mode][obdb] : 0, 3, 104, 0, true))
- return -EINVAL;
+done:
+ return ah->ah_gain.g_state;
+}
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ?
- ee->ee_db[ee_mode][obdb] : 0, 3, 107, 0, true))
- return -EINVAL;
+/* Write initial rf gain table to set the RF sensitivity
+ * this one works on all RF chips and has nothing to do
+ * with gain_F calibration */
+int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
+{
+ const struct ath5k_ini_rfgain *ath5k_rfg;
+ unsigned int i, size;
- /* Modify bank 7 */
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
- ee->ee_i_gain[ee_mode], 6, 29, 0, true))
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ath5k_rfg = rfgain_5111;
+ size = ARRAY_SIZE(rfgain_5111);
+ break;
+ case AR5K_RF5112:
+ ath5k_rfg = rfgain_5112;
+ size = ARRAY_SIZE(rfgain_5112);
+ break;
+ case AR5K_RF2413:
+ ath5k_rfg = rfgain_2413;
+ size = ARRAY_SIZE(rfgain_2413);
+ break;
+ case AR5K_RF2316:
+ ath5k_rfg = rfgain_2316;
+ size = ARRAY_SIZE(rfgain_2316);
+ break;
+ case AR5K_RF5413:
+ ath5k_rfg = rfgain_5413;
+ size = ARRAY_SIZE(rfgain_5413);
+ break;
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ ath5k_rfg = rfgain_2425;
+ size = ARRAY_SIZE(rfgain_2425);
+ break;
+ default:
return -EINVAL;
+ }
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
- ee->ee_xpd[ee_mode], 1, 4, 0, true))
+ switch (freq) {
+ case AR5K_INI_RFGAIN_2GHZ:
+ case AR5K_INI_RFGAIN_5GHZ:
+ break;
+ default:
return -EINVAL;
+ }
- /* Write RF values */
- for (i = 0; i < rf_size; i++) {
+ for (i = 0; i < size; i++) {
AR5K_REG_WAIT(i);
- ath5k_hw_reg_write(ah, rf[i], rfregs_5111[i].rf_register);
+ ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
+ (u32)ath5k_rfg[i].rfg_register);
}
return 0;
}
+
+
+/********************\
+* RF Registers setup *
+\********************/
+
+
/*
- * Read EEPROM Calibration data, modify RF Banks and Initialize RF5112
+ * Setup RF registers by writing rf buffer on hw
*/
-static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, unsigned int mode)
+int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ unsigned int mode)
{
- const struct ath5k_ini_rf *rf_ini;
+ const struct ath5k_rf_reg *rf_regs;
+ const struct ath5k_ini_rfbuffer *ini_rfb;
+ const struct ath5k_gain_opt *go = NULL;
+ const struct ath5k_gain_opt_step *g_step;
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 *rf;
- unsigned int rf_size, i;
- int obdb = -1, bank = -1;
- u32 ee_mode;
-
- AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX);
+ u8 ee_mode = 0;
+ u32 *rfb;
+ int i, obdb = -1, bank = -1;
- rf = ah->ah_rf_banks;
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+ ini_rfb = rfb_5111;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111);
+ go = &rfgain_opt_5111;
+ break;
+ case AR5K_RF5112:
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+ ini_rfb = rfb_5112a;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a);
+ } else {
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+ ini_rfb = rfb_5112;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112);
+ }
+ go = &rfgain_opt_5112;
+ break;
+ case AR5K_RF2413:
+ rf_regs = rf_regs_2413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413);
+ ini_rfb = rfb_2413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413);
+ break;
+ case AR5K_RF2316:
+ rf_regs = rf_regs_2316;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316);
+ ini_rfb = rfb_2316;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316);
+ break;
+ case AR5K_RF5413:
+ rf_regs = rf_regs_5413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413);
+ ini_rfb = rfb_5413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413);
+ break;
+ case AR5K_RF2317:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ ini_rfb = rfb_2317;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317);
+ break;
+ case AR5K_RF2425:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ if (ah->ah_mac_srev < AR5K_SREV_AR2417) {
+ ini_rfb = rfb_2425;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425);
+ } else {
+ ini_rfb = rfb_2417;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
- if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A
- && !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) {
- rf_ini = rfregs_2112a;
- rf_size = ARRAY_SIZE(rfregs_5112a);
- if (mode < 2) {
- ATH5K_ERR(ah->ah_sc, "invalid channel mode: %i\n",
- mode);
- return -EINVAL;
+ /* If it's the first time we set rf buffer, allocate
+ * ah->ah_rf_banks based on ah->ah_rf_banks_size
+ * we set above */
+ if (ah->ah_rf_banks == NULL) {
+ ah->ah_rf_banks = kmalloc(sizeof(u32) * ah->ah_rf_banks_size,
+ GFP_KERNEL);
+ if (ah->ah_rf_banks == NULL) {
+ ATH5K_ERR(ah->ah_sc, "out of memory\n");
+ return -ENOMEM;
}
- mode = mode - 2; /*no a/turboa modes for 2112*/
- } else if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
- rf_ini = rfregs_5112a;
- rf_size = ARRAY_SIZE(rfregs_5112a);
- } else {
- rf_ini = rfregs_5112;
- rf_size = ARRAY_SIZE(rfregs_5112);
}
/* Copy values to modify them */
- for (i = 0; i < rf_size; i++) {
- if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
+ rfb = ah->ah_rf_banks;
+
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) {
ATH5K_ERR(ah->ah_sc, "invalid bank\n");
return -EINVAL;
}
- if (bank != rf_ini[i].rf_bank) {
- bank = rf_ini[i].rf_bank;
+ /* Bank changed, write down the offset */
+ if (bank != ini_rfb[i].rfb_bank) {
+ bank = ini_rfb[i].rfb_bank;
ah->ah_offset[bank] = i;
}
- rf[i] = rf_ini[i].rf_value[mode];
+ rfb[i] = ini_rfb[i].rfb_mode_data[mode];
}
- /* Modify bank 6 */
+ /* Set Output and Driver bias current (OB/DB) */
if (channel->hw_value & CHANNEL_2GHZ) {
- if (channel->hw_value & CHANNEL_OFDM)
+
+ if (channel->hw_value & CHANNEL_CCK)
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ else
ee_mode = AR5K_EEPROM_MODE_11G;
+
+ /* For RF511X/RF211X combination we
+ * use b_OB and b_DB parameters stored
+ * in eeprom on ee->ee_ob[ee_mode][0]
+ *
+ * For all other chips we use OB/DB for 2Ghz
+ * stored in the b/g modal section just like
+ * 802.11a on ee->ee_ob[ee_mode][1] */
+ if ((ah->ah_radio == AR5K_RF5111) ||
+ (ah->ah_radio == AR5K_RF5112))
+ obdb = 0;
else
- ee_mode = AR5K_EEPROM_MODE_11B;
- obdb = 0;
+ obdb = 1;
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_ob[ee_mode][obdb], 3, 287, 0, true))
- return -EINVAL;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_2GHZ, true);
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_ob[ee_mode][obdb], 3, 290, 0, true))
- return -EINVAL;
- } else {
- /* For 11a, Turbo and XR */
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_2GHZ, true);
+
+ /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */
+ } else if ((channel->hw_value & CHANNEL_5GHZ) ||
+ (ah->ah_radio == AR5K_RF5111)) {
+
+ /* For 11a, Turbo and XR we need to choose
+ * OB/DB based on frequency range */
ee_mode = AR5K_EEPROM_MODE_11A;
- obdb = channel->center_freq >= 5725 ? 3 :
- (channel->center_freq >= 5500 ? 2 :
+ obdb = channel->center_freq >= 5725 ? 3 :
+ (channel->center_freq >= 5500 ? 2 :
(channel->center_freq >= 5260 ? 1 :
- (channel->center_freq > 4000 ? 0 : -1)));
+ (channel->center_freq > 4000 ? 0 : -1)));
- if (obdb == -1)
+ if (obdb < 0)
return -EINVAL;
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_ob[ee_mode][obdb], 3, 279, 0, true))
- return -EINVAL;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_5GHZ, true);
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_ob[ee_mode][obdb], 3, 282, 0, true))
- return -EINVAL;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_5GHZ, true);
}
- ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_x_gain[ee_mode], 2, 270, 0, true);
- ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_x_gain[ee_mode], 2, 257, 0, true);
-
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
- ee->ee_xpd[ee_mode], 1, 302, 0, true))
- return -EINVAL;
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
- /* Modify bank 7 */
- if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
- ee->ee_i_gain[ee_mode], 6, 14, 0, true))
- return -EINVAL;
+ /* Bank Modifications (chip-specific) */
+ if (ah->ah_radio == AR5K_RF5111) {
- /* Write RF values */
- for (i = 0; i < rf_size; i++)
- ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register);
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value & CHANNEL_OFDM) {
- return 0;
-}
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+ AR5K_PHY_FRAME_CTL_TX_CLIP,
+ g_step->gos_param[0]);
-/*
- * Initialize RF5413/5414 and future chips
- * (until we come up with a better solution)
- */
-static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, unsigned int mode)
-{
- const struct ath5k_ini_rf *rf_ini;
- u32 *rf;
- unsigned int rf_size, i;
- int bank = -1;
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_90, true);
- AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX);
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_84, true);
- rf = ah->ah_rf_banks;
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_RFGAIN_SEL, true);
- switch (ah->ah_radio) {
- case AR5K_RF5413:
- rf_ini = rfregs_5413;
- rf_size = ARRAY_SIZE(rfregs_5413);
- break;
- case AR5K_RF2413:
- rf_ini = rfregs_2413;
- rf_size = ARRAY_SIZE(rfregs_2413);
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
- if (mode < 2) {
- ATH5K_ERR(ah->ah_sc,
- "invalid channel mode: %i\n", mode);
- return -EINVAL;
}
- mode = mode - 2;
- break;
- case AR5K_RF2425:
- rf_ini = rfregs_2425;
- rf_size = ARRAY_SIZE(rfregs_2425);
+ /* Bank 6/7 setup */
- if (mode < 2) {
- ATH5K_ERR(ah->ah_sc,
- "invalid channel mode: %i\n", mode);
- return -EINVAL;
- }
+ ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode],
+ AR5K_RF_PWD_XPD, true);
- /* Map b to g */
- if (mode == 2)
- mode = 0;
- else
- mode = mode - 3;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
- break;
- default:
- return -EINVAL;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_PLO_SEL, true);
+
+ /* TODO: Half/quarter channel support */
}
- /* Copy values to modify them */
- for (i = 0; i < rf_size; i++) {
- if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
- ATH5K_ERR(ah->ah_sc, "invalid bank\n");
- return -EINVAL;
- }
+ if (ah->ah_radio == AR5K_RF5112) {
- if (bank != rf_ini[i].rf_bank) {
- bank = rf_ini[i].rf_bank;
- ah->ah_offset[bank] = i;
- }
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value & CHANNEL_OFDM) {
- rf[i] = rf_ini[i].rf_value[mode];
- }
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0],
+ AR5K_RF_MIXGAIN_OVR, true);
- /*
- * After compairing dumps from different cards
- * we get the same RF_BUFFER settings (diff returns
- * 0 lines). It seems that RF_BUFFER settings are static
- * and are written unmodified (no EEPROM stuff
- * is used because calibration data would be
- * different between different cards and would result
- * different RF_BUFFER settings)
- */
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_138, true);
- /* Write RF values */
- for (i = 0; i < rf_size; i++)
- ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register);
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_137, true);
- return 0;
-}
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_PWD_136, true);
-/*
- * Initialize RF
- */
-int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- unsigned int mode)
-{
- int (*func)(struct ath5k_hw *, struct ieee80211_channel *, unsigned int);
- int ret;
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4],
+ AR5K_RF_PWD_132, true);
- switch (ah->ah_radio) {
- case AR5K_RF5111:
- ah->ah_rf_banks_size = sizeof(rfregs_5111);
- func = ath5k_hw_rf5111_rfregs;
- break;
- case AR5K_RF5112:
- if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
- ah->ah_rf_banks_size = sizeof(rfregs_5112a);
- else
- ah->ah_rf_banks_size = sizeof(rfregs_5112);
- func = ath5k_hw_rf5112_rfregs;
- break;
- case AR5K_RF5413:
- ah->ah_rf_banks_size = sizeof(rfregs_5413);
- func = ath5k_hw_rf5413_rfregs;
- break;
- case AR5K_RF2413:
- ah->ah_rf_banks_size = sizeof(rfregs_2413);
- func = ath5k_hw_rf5413_rfregs;
- break;
- case AR5K_RF2425:
- ah->ah_rf_banks_size = sizeof(rfregs_2425);
- func = ath5k_hw_rf5413_rfregs;
- break;
- default:
- return -EINVAL;
- }
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5],
+ AR5K_RF_PWD_131, true);
- if (ah->ah_rf_banks == NULL) {
- /* XXX do extra checks? */
- ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL);
- if (ah->ah_rf_banks == NULL) {
- ATH5K_ERR(ah->ah_sc, "out of memory\n");
- return -ENOMEM;
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6],
+ AR5K_RF_PWD_130, true);
+
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
}
- }
- ret = func(ah, channel, mode);
- if (!ret)
- ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE;
+ /* Bank 6/7 setup */
- return ret;
-}
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_XPD_SEL, true);
-int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
-{
- const struct ath5k_ini_rfgain *ath5k_rfg;
- unsigned int i, size;
+ if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) {
+ /* Rev. 1 supports only one xpd */
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
- switch (ah->ah_radio) {
- case AR5K_RF5111:
- ath5k_rfg = rfgain_5111;
- size = ARRAY_SIZE(rfgain_5111);
- break;
- case AR5K_RF5112:
- ath5k_rfg = rfgain_5112;
- size = ARRAY_SIZE(rfgain_5112);
- break;
- case AR5K_RF5413:
- ath5k_rfg = rfgain_5413;
- size = ARRAY_SIZE(rfgain_5413);
- break;
- case AR5K_RF2413:
- ath5k_rfg = rfgain_2413;
- size = ARRAY_SIZE(rfgain_2413);
- freq = 0; /* only 2Ghz */
- break;
- case AR5K_RF2425:
- ath5k_rfg = rfgain_2425;
- size = ARRAY_SIZE(rfgain_2425);
- freq = 0; /* only 2Ghz */
- break;
- default:
- return -EINVAL;
- }
+ } else {
+ /* TODO: Set high and low gain bits */
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_PD_GAIN_LO, true);
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_PD_GAIN_HI, true);
- switch (freq) {
- case AR5K_INI_RFGAIN_2GHZ:
- case AR5K_INI_RFGAIN_5GHZ:
- break;
- default:
- return -EINVAL;
- }
+ /* Lower synth voltage on Rev 2 */
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_HIGH_VC_CP, true);
- for (i = 0; i < size; i++) {
- AR5K_REG_WAIT(i);
- ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
- (u32)ath5k_rfg[i].rfg_register);
- }
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_MID_VC_CP, true);
- return 0;
-}
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_LOW_VC_CP, true);
-enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah)
-{
- u32 data, type;
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_PUSH_UP, true);
- ATH5K_TRACE(ah->ah_sc);
+ /* Decrease power consumption on 5213+ BaseBand */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PAD2GND, true);
- if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active ||
- ah->ah_version <= AR5K_AR5211)
- return AR5K_RFGAIN_INACTIVE;
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB2_LVL, true);
- if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED)
- goto done;
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB5_LVL, true);
- data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_167, true);
- if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
- ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
- type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_166, true);
+ }
+ }
- if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK)
- ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR;
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
- if (ah->ah_radio >= AR5K_RF5112) {
- ath5k_hw_rfregs_gainf_corr(ah);
- ah->ah_gain.g_current =
- ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
- (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
- 0;
- }
+ /* TODO: Half/quarter channel support */
- if (ath5k_hw_rfregs_gain_readback(ah) &&
- AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
- ath5k_hw_rfregs_gain_adjust(ah))
- ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE;
}
-done:
- return ah->ah_rf_gain;
-}
+ if (ah->ah_radio == AR5K_RF5413 &&
+ channel->hw_value & CHANNEL_2GHZ) {
-int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah)
-{
- /* Initialize the gain optimization values */
- switch (ah->ah_radio) {
- case AR5K_RF5111:
- ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
- ah->ah_gain.g_step =
- &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx];
- ah->ah_gain.g_low = 20;
- ah->ah_gain.g_high = 35;
- ah->ah_gain.g_active = 1;
- break;
- case AR5K_RF5112:
- ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
- ah->ah_gain.g_step =
- &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx];
- ah->ah_gain.g_low = 20;
- ah->ah_gain.g_high = 85;
- ah->ah_gain.g_active = 1;
- break;
- default:
- return -EINVAL;
+ ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE,
+ true);
+
+ /* Set optimum value for early revisions (on pci-e chips) */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+ ah->ah_mac_srev < AR5K_SREV_AR5413)
+ ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3),
+ AR5K_RF_PWD_ICLOBUF_2G, true);
+
+ }
+
+ /* Write RF banks on hw */
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register);
}
return 0;
}
+
/**************************\
PHY/RF channel functions
\**************************/
@@ -2271,13 +1334,8 @@ done:
* as often as I/Q calibration.*/
ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
- /* Request RF gain */
- if (channel->hw_value & CHANNEL_5GHZ) {
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,
- AR5K_PHY_PAPD_PROBE_TXPOWER) |
- AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
- ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED;
- }
+ /* Initiate a gain_F calibration */
+ ath5k_hw_request_rfgain_probe(ah);
return 0;
}
@@ -2378,93 +1436,1120 @@ unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
return false; /*XXX: What do we return for 5210 ?*/
}
+
+/****************\
+* TX power setup *
+\****************/
+
+/*
+ * Helper functions
+ */
+
+/*
+ * Do linear interpolation between two given (x, y) points
+ */
+static s16
+ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
+ s16 y_left, s16 y_right)
+{
+ s16 ratio, result;
+
+ /* Avoid divide by zero and skip interpolation
+ * if we have the same point */
+ if ((x_left == x_right) || (y_left == y_right))
+ return y_left;
+
+ /*
+ * Since we use ints and not fps, we need to scale up in
+ * order to get a sane ratio value (or else we 'll eg. get
+ * always 1 instead of 1.25, 1.75 etc). We scale up by 100
+ * to have some accuracy both for 0.5 and 0.25 steps.
+ */
+ ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left));
+
+ /* Now scale down to be in range */
+ result = y_left + (ratio * (target - x_left) / 100);
+
+ return result;
+}
+
+/*
+ * Find vertical boundary (min pwr) for the linear PCDAC curve.
+ *
+ * Since we have the top of the curve and we draw the line below
+ * until we reach 1 (1 pcdac step) we need to know which point
+ * (x value) that is so that we don't go below y axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeroes.
+ */
+static s16
+ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
+ const s16 *pwrL, const s16 *pwrR)
+{
+ s8 tmp;
+ s16 min_pwrL, min_pwrR;
+ s16 pwr_i = pwrL[0];
+
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrL[0], pwrL[1],
+ stepL[0], stepL[1]);
+
+ } while (tmp > 1);
+
+ min_pwrL = pwr_i;
+
+ pwr_i = pwrR[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrR[0], pwrR[1],
+ stepR[0], stepR[1]);
+
+ } while (tmp > 1);
+
+ min_pwrR = pwr_i;
+
+ /* Keep the right boundary so that it works for both curves */
+ return max(min_pwrL, min_pwrR);
+}
+
+/*
+ * Interpolate (pwr,vpd) points to create a Power to PDADC or a
+ * Power to PCDAC curve.
+ *
+ * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC
+ * steps (offsets) on y axis. Power can go up to 31.5dB and max
+ * PCDAC/PDADC step for each curve is 64 but we can write more than
+ * one curves on hw so we can go up to 128 (which is the max step we
+ * can write on the final table).
+ *
+ * We write y values (PCDAC/PDADC steps) on hw.
+ */
+static void
+ath5k_create_power_curve(s16 pmin, s16 pmax,
+ const s16 *pwr, const u8 *vpd,
+ u8 num_points,
+ u8 *vpd_table, u8 type)
+{
+ u8 idx[2] = { 0, 1 };
+ s16 pwr_i = 2*pmin;
+ int i;
+
+ if (num_points < 2)
+ return;
+
+ /* We want the whole line, so adjust boundaries
+ * to cover the entire power range. Note that
+ * power values are already 0.25dB so no need
+ * to multiply pwr_i by 2 */
+ if (type == AR5K_PWRTABLE_LINEAR_PCDAC) {
+ pwr_i = pmin;
+ pmin = 0;
+ pmax = 63;
+ }
+
+ /* Find surrounding turning points (TPs)
+ * and interpolate between them */
+ for (i = 0; (i <= (u16) (pmax - pmin)) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+
+ /* We passed the right TP, move to the next set of TPs
+ * if we pass the last TP, extrapolate above using the last
+ * two TPs for ratio */
+ if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) {
+ idx[0]++;
+ idx[1]++;
+ }
+
+ vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i,
+ pwr[idx[0]], pwr[idx[1]],
+ vpd[idx[0]], vpd[idx[1]]);
+
+ /* Increase by 0.5dB
+ * (0.25 dB units) */
+ pwr_i += 2;
+ }
+}
+
+/*
+ * Get the surrounding per-channel power calibration piers
+ * for a given frequency so that we can interpolate between
+ * them and come up with an apropriate dataset for our current
+ * channel.
+ */
+static void
+ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_chan_pcal_info **pcinfo_l,
+ struct ath5k_chan_pcal_info **pcinfo_r)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ if (!(channel->hw_value & CHANNEL_OFDM)) {
+ pcinfo = ee->ee_pwr_cal_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ } else if (channel->hw_value & CHANNEL_2GHZ) {
+ pcinfo = ee->ee_pwr_cal_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ } else {
+ pcinfo = ee->ee_pwr_cal_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ }
+ max = ee->ee_n_piers[mode] - 1;
+
+ /* Frequency is below our calibrated
+ * range. Use the lowest power curve
+ * we have */
+ if (target < pcinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ /* Frequency is above our calibrated
+ * range. Use the highest power curve
+ * we have */
+ if (target > pcinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ /* Frequency is inside our calibrated
+ * channel range. Pick the surrounding
+ * calibration piers so that we can
+ * interpolate */
+ for (i = 0; i <= max; i++) {
+
+ /* Frequency matches one of our calibration
+ * piers, no need to interpolate, just use
+ * that calibration pier */
+ if (pcinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ /* We found a calibration pier that's above
+ * frequency, use this pier and the previous
+ * one to interpolate */
+ if (target < pcinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ *pcinfo_l = &pcinfo[idx_l];
+ *pcinfo_r = &pcinfo[idx_r];
+
+ return;
+}
+
+/*
+ * Get the surrounding per-rate power calibration data
+ * for a given frequency and interpolate between power
+ * values to set max target power supported by hw for
+ * each rate.
+ */
+static void
+ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_rate_pcal_info *rates)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_rate_pcal_info *rpinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ if (!(channel->hw_value & CHANNEL_OFDM)) {
+ rpinfo = ee->ee_rate_tpwr_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ } else if (channel->hw_value & CHANNEL_2GHZ) {
+ rpinfo = ee->ee_rate_tpwr_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ } else {
+ rpinfo = ee->ee_rate_tpwr_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ }
+ max = ee->ee_rate_target_pwr_num[mode] - 1;
+
+ /* Get the surrounding calibration
+ * piers - same as above */
+ if (target < rpinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ if (target > rpinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ for (i = 0; i <= max; i++) {
+
+ if (rpinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ if (target < rpinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ /* Now interpolate power value, based on the frequency */
+ rates->freq = target;
+
+ rates->target_power_6to24 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_6to24,
+ rpinfo[idx_r].target_power_6to24);
+
+ rates->target_power_36 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_36,
+ rpinfo[idx_r].target_power_36);
+
+ rates->target_power_48 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_48,
+ rpinfo[idx_r].target_power_48);
+
+ rates->target_power_54 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_54,
+ rpinfo[idx_r].target_power_54);
+}
+
+/*
+ * Get the max edge power for this channel if
+ * we have such data from EEPROM's Conformance Test
+ * Limits (CTL), and limit max power if needed.
+ *
+ * FIXME: Only works for world regulatory domains
+ */
+static void
+ath5k_get_max_ctl_power(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_edge_power *rep = ee->ee_ctl_pwr;
+ u8 *ctl_val = ee->ee_ctl;
+ s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4;
+ s16 edge_pwr = 0;
+ u8 rep_idx;
+ u8 i, ctl_mode;
+ u8 ctl_idx = 0xFF;
+ u32 target = channel->center_freq;
+
+ /* Find out a CTL for our mode that's not mapped
+ * on a specific reg domain.
+ *
+ * TODO: Map our current reg domain to one of the 3 available
+ * reg domain ids so that we can support more CTLs. */
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_G:
+ ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_B:
+ ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_T:
+ ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_TG:
+ ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_XR:
+ /* Fall through */
+ default:
+ return;
+ }
+
+ for (i = 0; i < ee->ee_ctls; i++) {
+ if (ctl_val[i] == ctl_mode) {
+ ctl_idx = i;
+ break;
+ }
+ }
+
+ /* If we have a CTL dataset available grab it and find the
+ * edge power for our frequency */
+ if (ctl_idx == 0xFF)
+ return;
+
+ /* Edge powers are sorted by frequency from lower
+ * to higher. Each CTL corresponds to 8 edge power
+ * measurements. */
+ rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES;
+
+ /* Don't do boundaries check because we
+ * might have more that one bands defined
+ * for this mode */
+
+ /* Get the edge power that's closer to our
+ * frequency */
+ for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) {
+ rep_idx += i;
+ if (target <= rep[rep_idx].freq)
+ edge_pwr = (s16) rep[rep_idx].edge;
+ }
+
+ if (edge_pwr)
+ ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr);
+}
+
+
/*
- * TX power setup
+ * Power to PCDAC table functions
+ */
+
+/*
+ * Fill Power to PCDAC table on RF5111
+ *
+ * No further processing is needed for RF5111, the only thing we have to
+ * do is fill the values below and above calibration range since eeprom data
+ * may not cover the entire PCDAC table.
*/
+static void
+ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_tmp = ah->ah_txpower.tmpL[0];
+ u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i;
+ s16 min_pwr, max_pwr;
+
+ /* Get table boundaries */
+ min_pwr = table_min[0];
+ pcdac_0 = pcdac_tmp[0];
+
+ max_pwr = table_max[0];
+ pcdac_n = pcdac_tmp[table_max[0] - table_min[0]];
+
+ /* Extrapolate below minimum using pcdac_0 */
+ pcdac_i = 0;
+ for (i = 0; i < min_pwr; i++)
+ pcdac_out[pcdac_i++] = pcdac_0;
+
+ /* Copy values from pcdac_tmp */
+ pwr_idx = min_pwr;
+ for (i = 0 ; pwr_idx <= max_pwr &&
+ pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+ pcdac_out[pcdac_i++] = pcdac_tmp[i];
+ pwr_idx++;
+ }
+
+ /* Extrapolate above maximum */
+ while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE)
+ pcdac_out[pcdac_i++] = pcdac_n;
+
+}
/*
- * Initialize the tx power table (not fully implemented)
+ * Combine available XPD Curves and fill Linear Power to PCDAC table
+ * on RF5112
+ *
+ * RFX112 can have up to 2 curves (one for low txpower range and one for
+ * higher txpower range). We need to put them both on pcdac_out and place
+ * them in the correct location. In case we only have one curve available
+ * just fit it on pcdac_out (it's supposed to cover the entire range of
+ * available pwr levels since it's always the higher power curve). Extrapolate
+ * below and above final table if needed.
*/
-static void ath5k_txpower_table(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, s16 max_power)
+static void
+ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max, u8 pdcurves)
{
- unsigned int i, min, max, n;
- u16 txpower, *rates;
-
- rates = ah->ah_txpower.txp_rates;
-
- txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2;
- if (max_power > txpower)
- txpower = max_power > AR5K_TUNE_MAX_TXPOWER ?
- AR5K_TUNE_MAX_TXPOWER : max_power;
-
- for (i = 0; i < AR5K_MAX_RATES; i++)
- rates[i] = txpower;
-
- /* XXX setup target powers by rate */
-
- ah->ah_txpower.txp_min = rates[7];
- ah->ah_txpower.txp_max = rates[0];
- ah->ah_txpower.txp_ofdm = rates[0];
-
- /* Calculate the power table */
- n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac);
- min = AR5K_EEPROM_PCDAC_START;
- max = AR5K_EEPROM_PCDAC_STOP;
- for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP)
- ah->ah_txpower.txp_pcdac[i] =
-#ifdef notyet
- min + ((i * (max - min)) / n);
-#else
- min;
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_low_pwr;
+ u8 *pcdac_high_pwr;
+ u8 *pcdac_tmp;
+ u8 pwr;
+ s16 max_pwr_idx;
+ s16 min_pwr_idx;
+ s16 mid_pwr_idx = 0;
+ /* Edge flag turs on the 7nth bit on the PCDAC
+ * to delcare the higher power curve (force values
+ * to be greater than 64). If we only have one curve
+ * we don't need to set this, if we have 2 curves and
+ * fill the table backwards this can also be used to
+ * switch from higher power curve to lower power curve */
+ u8 edge_flag;
+ int i;
+
+ /* When we have only one curve available
+ * that's the higher power curve. If we have
+ * two curves the first is the high power curve
+ * and the next is the low power curve. */
+ if (pdcurves > 1) {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1];
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ mid_pwr_idx = table_max[1] - table_min[1] - 1;
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+
+ /* If table size goes beyond 31.5dB, keep the
+ * upper 31.5dB range when setting tx power.
+ * Note: 126 = 31.5 dB in quarter dB steps */
+ if (table_max[0] - table_min[1] > 126)
+ min_pwr_idx = table_max[0] - 126;
+ else
+ min_pwr_idx = table_min[1];
+
+ /* Since we fill table backwards
+ * start from high power curve */
+ pcdac_tmp = pcdac_high_pwr;
+
+ edge_flag = 0x40;
+#if 0
+ /* If both min and max power limits are in lower
+ * power curve's range, only use the low power curve.
+ * TODO: min/max levels are related to target
+ * power values requested from driver/user
+ * XXX: Is this really needed ? */
+ if (min_pwr < table_max[1] &&
+ max_pwr < table_max[1]) {
+ edge_flag = 0;
+ pcdac_tmp = pcdac_low_pwr;
+ max_pwr_idx = (table_max[1] - table_min[1])/2;
+ }
#endif
+ } else {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ min_pwr_idx = table_min[0];
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+ pcdac_tmp = pcdac_high_pwr;
+ edge_flag = 0;
+ }
+
+ /* This is used when setting tx power*/
+ ah->ah_txpower.txp_min_idx = min_pwr_idx/2;
+
+ /* Fill Power to PCDAC table backwards */
+ pwr = max_pwr_idx;
+ for (i = 63; i >= 0; i--) {
+ /* Entering lower power range, reset
+ * edge flag and set pcdac_tmp to lower
+ * power curve.*/
+ if (edge_flag == 0x40 &&
+ (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+ edge_flag = 0x00;
+ pcdac_tmp = pcdac_low_pwr;
+ pwr = mid_pwr_idx/2;
+ }
+
+ /* Don't go below 1, extrapolate below if we have
+ * already swithced to the lower power curve -or
+ * we only have one curve and edge_flag is zero
+ * anyway */
+ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) {
+ while (i >= 0) {
+ pcdac_out[i] = pcdac_out[i + 1];
+ i--;
+ }
+ break;
+ }
+
+ pcdac_out[i] = pcdac_tmp[pwr] | edge_flag;
+
+ /* Extrapolate above if pcdac is greater than
+ * 126 -this can happen because we OR pcdac_out
+ * value with edge_flag on high power curve */
+ if (pcdac_out[i] > 126)
+ pcdac_out[i] = 126;
+
+ /* Decrease by a 0.5dB step */
+ pwr--;
+ }
+}
+
+/* Write PCDAC values on hw */
+static void
+ath5k_setup_pcdac_table(struct ath5k_hw *ah)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ int i;
+
+ /*
+ * Write TX power values
+ */
+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+ ath5k_hw_reg_write(ah,
+ (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) |
+ (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16),
+ AR5K_PHY_PCDAC_TXPOWER(i));
+ }
}
+
/*
- * Set transmition power
+ * Power to PDADC table functions
*/
-int /*O.K. - txpower_table is unimplemented so this doesn't work*/
-ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- unsigned int txpower)
+
+/*
+ * Set the gain boundaries and create final Power to PDADC table
+ *
+ * We can have up to 4 pd curves, we need to do a simmilar process
+ * as we do for RF5112. This time we don't have an edge_flag but we
+ * set the gain boundaries on a separate register.
+ */
+static void
+ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
+ s16 *pwr_min, s16 *pwr_max, u8 pdcurves)
{
- bool tpc = ah->ah_txpower.txp_tpc;
- unsigned int i;
+ u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS];
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u8 *pdadc_tmp;
+ s16 pdadc_0;
+ u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size;
+ u8 pd_gain_overlap;
+
+ /* Note: Register value is initialized on initvals
+ * there is no feedback from hw.
+ * XXX: What about pd_gain_overlap from EEPROM ? */
+ pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
+
+ /* Create final PDADC table */
+ for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) {
+ pdadc_tmp = ah->ah_txpower.tmpL[pdg];
+
+ if (pdg == pdcurves - 1)
+ /* 2 dB boundary stretch for last
+ * (higher power) curve */
+ gain_boundaries[pdg] = pwr_max[pdg] + 4;
+ else
+ /* Set gain boundary in the middle
+ * between this curve and the next one */
+ gain_boundaries[pdg] =
+ (pwr_max[pdg] + pwr_min[pdg + 1]) / 2;
+
+ /* Sanity check in case our 2 db stretch got out of
+ * range. */
+ if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER)
+ gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER;
+
+ /* For the first curve (lower power)
+ * start from 0 dB */
+ if (pdg == 0)
+ pdadc_0 = 0;
+ else
+ /* For the other curves use the gain overlap */
+ pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) -
+ pd_gain_overlap;
- ATH5K_TRACE(ah->ah_sc);
- if (txpower > AR5K_TUNE_MAX_TXPOWER) {
- ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
- return -EINVAL;
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1)
+ pwr_step = pdadc_tmp[1] - pdadc_tmp[0];
+ else
+ pwr_step = 1;
+
+ /* If pdadc_0 is negative, we need to extrapolate
+ * below this pdgain by a number of pwr_steps */
+ while ((pdadc_0 < 0) && (pdadc_i < 128)) {
+ s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp;
+ pdadc_0++;
+ }
+
+ /* Set last pwr level, using gain boundaries */
+ pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg];
+ /* Limit it to be inside pwr range */
+ table_size = pwr_max[pdg] - pwr_min[pdg];
+ max_idx = (pdadc_n < table_size) ? pdadc_n : table_size;
+
+ /* Fill pdadc_out table */
+ while (pdadc_0 < max_idx)
+ pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++];
+
+ /* Need to extrapolate above this pdgain? */
+ if (pdadc_n <= max_idx)
+ continue;
+
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1)
+ pwr_step = pdadc_tmp[table_size - 1] -
+ pdadc_tmp[table_size - 2];
+ else
+ pwr_step = 1;
+
+ /* Extrapolate above */
+ while ((pdadc_0 < (s16) pdadc_n) &&
+ (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) {
+ s16 tmp = pdadc_tmp[table_size - 1] +
+ (pdadc_0 - max_idx) * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp;
+ pdadc_0++;
+ }
+ }
+
+ while (pdg < AR5K_EEPROM_N_PD_GAINS) {
+ gain_boundaries[pdg] = gain_boundaries[pdg - 1];
+ pdg++;
+ }
+
+ while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) {
+ pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1];
+ pdadc_i++;
}
+ /* Set gain boundaries */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(pd_gain_overlap,
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
+ AR5K_REG_SM(gain_boundaries[0],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
+ AR5K_REG_SM(gain_boundaries[1],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
+ AR5K_REG_SM(gain_boundaries[2],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
+ AR5K_REG_SM(gain_boundaries[3],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
+ AR5K_PHY_TPC_RG5);
+
+ /* Used for setting rate power table */
+ ah->ah_txpower.txp_min_idx = pwr_min[0];
+
+}
+
+/* Write PDADC values on hw */
+static void
+ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah,
+ u8 pdcurves, u8 *pdg_to_idx)
+{
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u32 reg;
+ u8 i;
+
+ /* Select the right pdgain curves */
+
+ /* Clear current settings */
+ reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
+ reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
+ AR5K_PHY_TPC_RG1_PDGAIN_2 |
+ AR5K_PHY_TPC_RG1_PDGAIN_3 |
+ AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
/*
- * RF2413 for some reason can't
- * transmit anything if we call
- * this funtion, so we skip it
- * until we fix txpower.
+ * Use pd_gains curve from eeprom
*
- * XXX: Assume same for RF2425
- * to be safe.
+ * This overrides the default setting from initvals
+ * in case some vendors (e.g. Zcomax) don't use the default
+ * curves. If we don't honor their settings we 'll get a
+ * 5dB (1 * gain overlap ?) drop.
*/
- if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425))
- return 0;
-
- /* Reset TX power values */
- memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
- ah->ah_txpower.txp_tpc = tpc;
+ reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
- /* Initialize TX power table */
- ath5k_txpower_table(ah, channel, txpower);
+ switch (pdcurves) {
+ case 3:
+ reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
+ /* Fall through */
+ case 2:
+ reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
+ /* Fall through */
+ case 1:
+ reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
+ break;
+ }
+ ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
/*
* Write TX power values
*/
for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
ath5k_hw_reg_write(ah,
- ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) |
- (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff),
- AR5K_PHY_PCDAC_TXPOWER(i));
+ ((pdadc_out[4*i + 0] & 0xff) << 0) |
+ ((pdadc_out[4*i + 1] & 0xff) << 8) |
+ ((pdadc_out[4*i + 2] & 0xff) << 16) |
+ ((pdadc_out[4*i + 3] & 0xff) << 24),
+ AR5K_PHY_PDADC_TXPOWER(i));
+ }
+}
+
+
+/*
+ * Common code for PCDAC/PDADC tables
+ */
+
+/*
+ * This is the main function that uses all of the above
+ * to set PCDAC/PDADC table on hw for the current channel.
+ * This table is used for tx power calibration on the basband,
+ * without it we get weird tx power levels and in some cases
+ * distorted spectral mask
+ */
+static int
+ath5k_setup_channel_powertable(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ u8 ee_mode, u8 type)
+{
+ struct ath5k_pdgain_info *pdg_L, *pdg_R;
+ struct ath5k_chan_pcal_info *pcinfo_L;
+ struct ath5k_chan_pcal_info *pcinfo_R;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ s16 table_min[AR5K_EEPROM_N_PD_GAINS];
+ s16 table_max[AR5K_EEPROM_N_PD_GAINS];
+ u8 *tmpL;
+ u8 *tmpR;
+ u32 target = channel->center_freq;
+ int pdg, i;
+
+ /* Get surounding freq piers for this channel */
+ ath5k_get_chan_pcal_surrounding_piers(ah, channel,
+ &pcinfo_L,
+ &pcinfo_R);
+
+ /* Loop over pd gain curves on
+ * surounding freq piers by index */
+ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
+
+ /* Fill curves in reverse order
+ * from lower power (max gain)
+ * to higher power. Use curve -> idx
+ * backmaping we did on eeprom init */
+ u8 idx = pdg_curve_to_idx[pdg];
+
+ /* Grab the needed curves by index */
+ pdg_L = &pcinfo_L->pd_curves[idx];
+ pdg_R = &pcinfo_R->pd_curves[idx];
+
+ /* Initialize the temp tables */
+ tmpL = ah->ah_txpower.tmpL[pdg];
+ tmpR = ah->ah_txpower.tmpR[pdg];
+
+ /* Set curve's x boundaries and create
+ * curves so that they cover the same
+ * range (if we don't do that one table
+ * will have values on some range and the
+ * other one won't have any so interpolation
+ * will fail) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]) / 2;
+
+ table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2;
+
+ /* Now create the curves on surrounding channels
+ * and interpolate if needed to get the final
+ * curve for this gain on this channel */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* Override min/max so that we don't loose
+ * accuracy (don't divide by 2) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]);
+
+ table_max[pdg] =
+ max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]);
+
+ /* Override minimum so that we don't get
+ * out of bounds while extrapolating
+ * below. Don't do this when we have 2
+ * curves and we are on the high power curve
+ * because table_min is ok in this case */
+ if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) {
+
+ table_min[pdg] =
+ ath5k_get_linear_pcdac_min(pdg_L->pd_step,
+ pdg_R->pd_step,
+ pdg_L->pd_pwr,
+ pdg_R->pd_pwr);
+
+ /* Don't go too low because we will
+ * miss the upper part of the curve.
+ * Note: 126 = 31.5dB (max power supported)
+ * in 0.25dB units */
+ if (table_max[pdg] - table_min[pdg] > 126)
+ table_min[pdg] = table_max[pdg] - 126;
+ }
+
+ /* Fall through */
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_L->pd_pwr,
+ pdg_L->pd_step,
+ pdg_L->pd_points, tmpL, type);
+
+ /* We are in a calibration
+ * pier, no need to interpolate
+ * between freq piers */
+ if (pcinfo_L == pcinfo_R)
+ continue;
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_R->pd_pwr,
+ pdg_R->pd_step,
+ pdg_R->pd_points, tmpR, type);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Interpolate between curves
+ * of surounding freq piers to
+ * get the final curve for this
+ * pd gain. Re-use tmpL for interpolation
+ * output */
+ for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+ tmpL[i] = (u8) ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ (s16) tmpL[i],
+ (s16) tmpR[i]);
+ }
+ }
+
+ /* Now we have a set of curves for this
+ * channel on tmpL (x range is table_max - table_min
+ * and y values are tmpL[pdg][]) sorted in the same
+ * order as EEPROM (because we've used the backmaping).
+ * So for RF5112 it's from higher power to lower power
+ * and for RF2413 it's from lower power to higher power.
+ * For RF5111 we only have one curve. */
+
+ /* Fill min and max power levels for this
+ * channel by interpolating the values on
+ * surounding channels to complete the dataset */
+ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->min_pwr, pcinfo_R->min_pwr);
+
+ ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->max_pwr, pcinfo_R->max_pwr);
+
+ /* We are ready to go, fill PCDAC/PDADC
+ * table and write settings on hardware */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* For RF5112 we can have one or two curves
+ * and each curve covers a certain power lvl
+ * range so we need to do some more processing */
+ ath5k_combine_linear_pcdac_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Set txp.offset so that we can
+ * match max power value with max
+ * table index */
+ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2);
+
+ /* Write settings on hw */
+ ath5k_setup_pcdac_table(ah);
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ /* We are done for RF5111 since it has only
+ * one curve, just fit the curve on the table */
+ ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max);
+
+ /* No rate powertable adjustment for RF5111 */
+ ah->ah_txpower.txp_min_idx = 0;
+ ah->ah_txpower.txp_offset = 0;
+
+ /* Write settings on hw */
+ ath5k_setup_pcdac_table(ah);
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+ /* Set PDADC boundaries and fill
+ * final PDADC table */
+ ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Write settings on hw */
+ ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx);
+
+ /* Set txp.offset, note that table_min
+ * can be negative */
+ ah->ah_txpower.txp_offset = table_min[0];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Per-rate tx power setting
+ *
+ * This is the code that sets the desired tx power (below
+ * maximum) on hw for each rate (we also have TPC that sets
+ * power per packet). We do that by providing an index on the
+ * PCDAC/PDADC table we set up.
+ */
+
+/*
+ * Set rate power table
+ *
+ * For now we only limit txpower based on maximum tx power
+ * supported by hw (what's inside rate_info). We need to limit
+ * this even more, based on regulatory domain etc.
+ *
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps)
+ * and is indexed as follows:
+ * rates[0] - rates[7] -> OFDM rates
+ * rates[8] - rates[14] -> CCK rates
+ * rates[15] -> XR rates (they all have the same power)
+ */
+static void
+ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
+ struct ath5k_rate_pcal_info *rate_info,
+ u8 ee_mode)
+{
+ unsigned int i;
+ u16 *rates;
+
+ /* max_pwr is power level we got from driver/user in 0.5dB
+ * units, switch to 0.25dB units so we can compare */
+ max_pwr *= 2;
+ max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2;
+
+ /* apply rate limits */
+ rates = ah->ah_txpower.txp_rates_power_table;
+
+ /* OFDM rates 6 to 24Mb/s */
+ for (i = 0; i < 5; i++)
+ rates[i] = min(max_pwr, rate_info->target_power_6to24);
+
+ /* Rest OFDM rates */
+ rates[5] = min(rates[0], rate_info->target_power_36);
+ rates[6] = min(rates[0], rate_info->target_power_48);
+ rates[7] = min(rates[0], rate_info->target_power_54);
+
+ /* CCK rates */
+ /* 1L */
+ rates[8] = min(rates[0], rate_info->target_power_6to24);
+ /* 2L */
+ rates[9] = min(rates[0], rate_info->target_power_36);
+ /* 2S */
+ rates[10] = min(rates[0], rate_info->target_power_36);
+ /* 5L */
+ rates[11] = min(rates[0], rate_info->target_power_48);
+ /* 5S */
+ rates[12] = min(rates[0], rate_info->target_power_48);
+ /* 11L */
+ rates[13] = min(rates[0], rate_info->target_power_54);
+ /* 11S */
+ rates[14] = min(rates[0], rate_info->target_power_54);
+
+ /* XR rates */
+ rates[15] = min(rates[0], rate_info->target_power_6to24);
+
+ /* CCK rates have different peak to average ratio
+ * so we have to tweak their power so that gainf
+ * correction works ok. For this we use OFDM to
+ * CCK delta from eeprom */
+ if ((ee_mode == AR5K_EEPROM_MODE_11G) &&
+ (ah->ah_phy_revision < AR5K_SREV_PHY_5212A))
+ for (i = 8; i <= 15; i++)
+ rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
+
+ ah->ah_txpower.txp_min_pwr = rates[7];
+ ah->ah_txpower.txp_max_pwr = rates[0];
+ ah->ah_txpower.txp_ofdm = rates[7];
+}
+
+
+/*
+ * Set transmition power
+ */
+int
+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ u8 ee_mode, u8 txpower)
+{
+ struct ath5k_rate_pcal_info rate_info;
+ u8 type;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (txpower > AR5K_TUNE_MAX_TXPOWER) {
+ ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
+ return -EINVAL;
+ }
+ if (txpower == 0)
+ txpower = AR5K_TUNE_DEFAULT_TXPOWER;
+
+ /* Reset TX power values */
+ memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_txpower.txp_min_pwr = 0;
+ ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER;
+
+ /* Initialize TX power table */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ type = AR5K_PWRTABLE_PWR_TO_PCDAC;
+ break;
+ case AR5K_RF5112:
+ type = AR5K_PWRTABLE_LINEAR_PCDAC;
+ break;
+ case AR5K_RF2413:
+ case AR5K_RF5413:
+ case AR5K_RF2316:
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ type = AR5K_PWRTABLE_PWR_TO_PDADC;
+ break;
+ default:
+ return -EINVAL;
}
+ /* FIXME: Only on channel/mode change */
+ ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type);
+ if (ret)
+ return ret;
+
+ /* Limit max power if we have a CTL available */
+ ath5k_get_max_ctl_power(ah, channel);
+
+ /* FIXME: Tx power limit for this regdomain
+ * XXX: Mac80211/CRDA will do that anyway ? */
+
+ /* FIXME: Antenna reduction stuff */
+
+ /* FIXME: Limit power on turbo modes */
+
+ /* FIXME: TPC scale reduction */
+
+ /* Get surounding channels for per-rate power table
+ * calibration */
+ ath5k_get_rate_pcal_data(ah, channel, &rate_info);
+
+ /* Setup rate power table */
+ ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode);
+
+ /* Write rate power table on hw */
ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) |
AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1);
@@ -2481,26 +2566,34 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
- if (ah->ah_txpower.txp_tpc)
+ /* FIXME: TPC support */
+ if (ah->ah_txpower.txp_tpc) {
ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
- else
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
+ AR5K_TPC);
+ } else {
ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+ }
return 0;
}
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
{
/*Just a try M.F.*/
struct ieee80211_channel *channel = &ah->ah_current_channel;
ATH5K_TRACE(ah->ah_sc);
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
- "changing txpower to %d\n", power);
+ "changing txpower to %d\n", txpower);
- return ath5k_hw_txpower(ah, channel, power);
+ return ath5k_hw_txpower(ah, channel, mode, txpower);
}
#undef _ATH5K_PHY