1 files changed, 144 insertions, 175 deletions

diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 4dd1c1bda0f..3ab0b43aaf9 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -14,13 +14,9 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
- /* Implementation of beacon processing. */
-
 #include "core.h"
 
 /*
- *  Configure parameters for the beacon queue
- *
  *  This function will modify certain transmit queue properties depending on
  *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
  *  settings and channel width min/max
@@ -30,33 +26,38 @@ static int ath_beaconq_config(struct ath_softc *sc)
 	struct ath_hal *ah = sc->sc_ah;
 	struct ath9k_tx_queue_info qi;
 
-	ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi);
-	if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) {
+	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
+	if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
 		/* Always burst out beacon and CAB traffic. */
 		qi.tqi_aifs = 1;
 		qi.tqi_cwmin = 0;
 		qi.tqi_cwmax = 0;
 	} else {
 		/* Adhoc mode; important thing is to use 2x cwmin. */
-		qi.tqi_aifs = sc->sc_beacon_qi.tqi_aifs;
-		qi.tqi_cwmin = 2*sc->sc_beacon_qi.tqi_cwmin;
-		qi.tqi_cwmax = sc->sc_beacon_qi.tqi_cwmax;
+		qi.tqi_aifs = sc->beacon.beacon_qi.tqi_aifs;
+		qi.tqi_cwmin = 2*sc->beacon.beacon_qi.tqi_cwmin;
+		qi.tqi_cwmax = sc->beacon.beacon_qi.tqi_cwmax;
 	}
 
-	if (!ath9k_hw_set_txq_props(ah, sc->sc_bhalq, &qi)) {
+	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"%s: unable to update h/w beacon queue parameters\n",
-			__func__);
+			"unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
-		ath9k_hw_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
+		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq); /* push to h/w */
 		return 1;
 	}
 }
 
+static void ath_bstuck_process(struct ath_softc *sc)
+{
+	DPRINTF(sc, ATH_DBG_BEACON,
+		"stuck beacon; resetting (bmiss count %u)\n",
+		sc->beacon.bmisscnt);
+	ath_reset(sc, false);
+}
+
 /*
- *  Setup the beacon frame for transmit.
- *
  *  Associates the beacon frame buffer with a transmit descriptor.  Will set
  *  up all required antenna switch parameters, rate codes, and channel flags.
  *  Beacons are always sent out at the lowest rate, and are not retried.
@@ -68,21 +69,20 @@ static void ath_beacon_setup(struct ath_softc *sc,
 	struct ath_hal *ah = sc->sc_ah;
 	struct ath_desc *ds;
 	struct ath9k_11n_rate_series series[4];
-	const struct ath9k_rate_table *rt;
+	struct ath_rate_table *rt;
 	int flags, antenna;
 	u8 rix, rate;
 	int ctsrate = 0;
 	int ctsduration = 0;
 
-	DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n",
-		__func__, skb, skb->len);
+	DPRINTF(sc, ATH_DBG_BEACON, "m %p len %u\n", skb, skb->len);
 
 	/* setup descriptors */
 	ds = bf->bf_desc;
 
 	flags = ATH9K_TXDESC_NOACK;
 
-	if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS &&
+	if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC &&
 	    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
 		ds->ds_link = bf->bf_daddr; /* self-linked */
 		flags |= ATH9K_TXDESC_VEOL;
@@ -96,7 +96,7 @@ static void ath_beacon_setup(struct ath_softc *sc,
 		 * SWBA's
 		 * XXX assumes two antenna
 		 */
-		antenna = ((sc->ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1);
+		antenna = ((sc->beacon.ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1);
 	}
 
 	ds->ds_data = bf->bf_buf_addr;
@@ -106,15 +106,15 @@ static void ath_beacon_setup(struct ath_softc *sc,
 	 * XXX everything at min xmit rate
 	 */
 	rix = 0;
-	rt = sc->sc_currates;
-	rate = rt->info[rix].rateCode;
+	rt = sc->cur_rate_table;
+	rate = rt->info[rix].ratecode;
 	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
-		rate |= rt->info[rix].shortPreamble;
+		rate |= rt->info[rix].short_preamble;
 
 	ath9k_hw_set11n_txdesc(ah, ds,
 			       skb->len + FCS_LEN,     /* frame length */
 			       ATH9K_PKT_TYPE_BEACON,  /* Atheros packet type */
-			       avp->av_btxctl.txpower, /* txpower XXX */
+			       MAX_RATE_POWER,         /* FIXME */
 			       ATH9K_TXKEYIX_INVALID,  /* no encryption */
 			       ATH9K_KEY_TYPE_CLEAR,   /* no encryption */
 			       flags                   /* no ack,
@@ -138,31 +138,26 @@ static void ath_beacon_setup(struct ath_softc *sc,
 		ctsrate, ctsduration, series, 4, 0);
 }
 
-/*
- *  Generate beacon frame and queue cab data for a vap.
- *
- *  Updates the contents of the beacon frame.  It is assumed that the buffer for
- *  the beacon frame has been allocated in the ATH object, and simply needs to
- *  be filled for this cycle.  Also, any CAB (crap after beacon?) traffic will
- *  be added to the beacon frame at this point.
-*/
+/* Generate beacon frame and queue cab data for a vap */
 static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 {
 	struct ath_buf *bf;
 	struct ath_vap *avp;
 	struct sk_buff *skb;
 	struct ath_txq *cabq;
+	struct ieee80211_vif *vif;
 	struct ieee80211_tx_info *info;
 	int cabq_depth;
 
-	avp = sc->sc_vaps[if_id];
-	ASSERT(avp);
+	vif = sc->sc_vaps[if_id];
+	ASSERT(vif);
 
-	cabq = sc->sc_cabq;
+	avp = (void *)vif->drv_priv;
+	cabq = sc->beacon.cabq;
 
 	if (avp->av_bcbuf == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
-			__func__, avp, avp->av_bcbuf);
+		DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n",
+			avp, avp->av_bcbuf);
 		return NULL;
 	}
 
@@ -172,9 +167,10 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 		pci_unmap_single(sc->pdev, bf->bf_dmacontext,
 				 skb->len,
 				 PCI_DMA_TODEVICE);
+		dev_kfree_skb_any(skb);
 	}
 
-	skb = ieee80211_beacon_get(sc->hw, avp->av_if_data);
+	skb = ieee80211_beacon_get(sc->hw, vif);
 	bf->bf_mpdu = skb;
 	if (skb == NULL)
 		return NULL;
@@ -186,17 +182,24 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 		 * TX frames)
 		 */
 		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-		sc->seq_no += 0x10;
+		sc->tx.seq_no += 0x10;
 		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+		hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
 	}
 
 	bf->bf_buf_addr = bf->bf_dmacontext =
 		pci_map_single(sc->pdev, skb->data,
 			       skb->len,
 			       PCI_DMA_TODEVICE);
+	if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) {
+		dev_kfree_skb_any(skb);
+		bf->bf_mpdu = NULL;
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"pci_dma_mapping_error() on beaconing\n");
+		return NULL;
+	}
 
-	skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data);
+	skb = ieee80211_get_buffered_bc(sc->hw, vif);
 
 	/*
 	 * if the CABQ traffic from previous DTIM is pending and the current
@@ -219,7 +222,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 		if (sc->sc_nvaps > 1) {
 			ath_tx_draintxq(sc, cabq, false);
 			DPRINTF(sc, ATH_DBG_BEACON,
-				"%s: flush previous cabq traffic\n", __func__);
+				"flush previous cabq traffic\n");
 		}
 	}
 
@@ -232,7 +235,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	 */
 	while (skb) {
 		ath_tx_cabq(sc, skb);
-		skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data);
+		skb = ieee80211_get_buffered_bc(sc->hw, vif);
 	}
 
 	return bf;
@@ -244,17 +247,20 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 */
 static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
 {
+	struct ieee80211_vif *vif;
 	struct ath_hal *ah = sc->sc_ah;
 	struct ath_buf *bf;
 	struct ath_vap *avp;
 	struct sk_buff *skb;
 
-	avp = sc->sc_vaps[if_id];
-	ASSERT(avp);
+	vif = sc->sc_vaps[if_id];
+	ASSERT(vif);
+
+	avp = (void *)vif->drv_priv;
 
 	if (avp->av_bcbuf == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
-			__func__, avp, avp != NULL ? avp->av_bcbuf : NULL);
+		DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n",
+			avp, avp != NULL ? avp->av_bcbuf : NULL);
 		return;
 	}
 	bf = avp->av_bcbuf;
@@ -264,20 +270,12 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
 	ath_beacon_setup(sc, avp, bf);
 
 	/* NB: caller is known to have already stopped tx dma */
-	ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr);
-	ath9k_hw_txstart(ah, sc->sc_bhalq);
-	DPRINTF(sc, ATH_DBG_BEACON, "%s: TXDP%u = %llx (%p)\n", __func__,
-		sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc);
+	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
+	ath9k_hw_txstart(ah, sc->beacon.beaconq);
+	DPRINTF(sc, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
+		sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
 }
 
-/*
- *  Setup a h/w transmit queue for beacons.
- *
- *  This function allocates an information structure (struct ath9k_txq_info)
- *  on the stack, sets some specific parameters (zero out channel width
- *  min/max, and enable aifs). The info structure does not need to be
- *  persistant.
-*/
 int ath_beaconq_setup(struct ath_hal *ah)
 {
 	struct ath9k_tx_queue_info qi;
@@ -290,35 +288,29 @@ int ath_beaconq_setup(struct ath_hal *ah)
 	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
 }
 
-
-/*
- *  Allocate and setup an initial beacon frame.
- *
- *  Allocate a beacon state variable for a specific VAP instance created on
- *  the ATH interface.  This routine also calculates the beacon "slot" for
- *  staggared beacons in the mBSSID case.
-*/
 int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 {
+	struct ieee80211_vif *vif;
 	struct ath_vap *avp;
 	struct ieee80211_hdr *hdr;
 	struct ath_buf *bf;
 	struct sk_buff *skb;
 	__le64 tstamp;
 
-	avp = sc->sc_vaps[if_id];
-	ASSERT(avp);
+	vif = sc->sc_vaps[if_id];
+	ASSERT(vif);
+
+	avp = (void *)vif->drv_priv;
 
 	/* Allocate a beacon descriptor if we haven't done so. */
 	if (!avp->av_bcbuf) {
 		/* Allocate beacon state for hostap/ibss.  We know
 		 * a buffer is available. */
-
-		avp->av_bcbuf = list_first_entry(&sc->sc_bbuf,
+		avp->av_bcbuf = list_first_entry(&sc->beacon.bbuf,
 						 struct ath_buf, list);
 		list_del(&avp->av_bcbuf->list);
 
-		if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP ||
+		if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP ||
 		    !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
 			int slot;
 			/*
@@ -327,13 +319,13 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 			 */
 			avp->av_bslot = 0;
 			for (slot = 0; slot < ATH_BCBUF; slot++)
-				if (sc->sc_bslot[slot] == ATH_IF_ID_ANY) {
+				if (sc->beacon.bslot[slot] == ATH_IF_ID_ANY) {
 					/*
 					 * XXX hack, space out slots to better
 					 * deal with misses
 					 */
 					if (slot+1 < ATH_BCBUF &&
-					    sc->sc_bslot[slot+1] ==
+					    sc->beacon.bslot[slot+1] ==
 						ATH_IF_ID_ANY) {
 						avp->av_bslot = slot+1;
 						break;
@@ -341,8 +333,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 					avp->av_bslot = slot;
 					/* NB: keep looking for a double slot */
 				}
-			BUG_ON(sc->sc_bslot[avp->av_bslot] != ATH_IF_ID_ANY);
-			sc->sc_bslot[avp->av_bslot] = if_id;
+			BUG_ON(sc->beacon.bslot[avp->av_bslot] != ATH_IF_ID_ANY);
+			sc->beacon.bslot[avp->av_bslot] = if_id;
 			sc->sc_nbcnvaps++;
 		}
 	}
@@ -363,15 +355,14 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 	 * FIXME: Fill avp->av_btxctl.txpower and
 	 * avp->av_btxctl.shortPreamble
 	 */
-	skb = ieee80211_beacon_get(sc->hw, avp->av_if_data);
+	skb = ieee80211_beacon_get(sc->hw, vif);
 	if (skb == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "%s: cannot get skb\n",
-			__func__);
+		DPRINTF(sc, ATH_DBG_BEACON, "cannot get skb\n");
 		return -ENOMEM;
 	}
 
 	tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	sc->bc_tstamp = le64_to_cpu(tstamp);
+	sc->beacon.bc_tstamp = le64_to_cpu(tstamp);
 
 	/*
 	 * Calculate a TSF adjustment factor required for
@@ -402,36 +393,36 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 		val = cpu_to_le64(tsfadjust << 10);     /* TU->TSF */
 
 		DPRINTF(sc, ATH_DBG_BEACON,
-			"%s: %s beacons, bslot %d intval %u tsfadjust %llu\n",
-			__func__, "stagger",
+			"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
 			avp->av_bslot, intval, (unsigned long long)tsfadjust);
 
 		hdr = (struct ieee80211_hdr *)skb->data;
 		memcpy(&hdr[1], &val, sizeof(val));
 	}
 
+	bf->bf_mpdu = skb;
 	bf->bf_buf_addr = bf->bf_dmacontext =
 		pci_map_single(sc->pdev, skb->data,
 			       skb->len,
 			       PCI_DMA_TODEVICE);
-	bf->bf_mpdu = skb;
+	if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) {
+		dev_kfree_skb_any(skb);
+		bf->bf_mpdu = NULL;
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"pci_dma_mapping_error() on beacon alloc\n");
+		return -ENOMEM;
+	}
 
 	return 0;
 }
 
-/*
- *  Reclaim beacon resources and return buffer to the pool.
- *
- *  Checks the VAP to put the beacon frame buffer back to the ATH object
- *  queue, and de-allocates any skbs that were sent as CAB traffic.
-*/
 void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
 {
 	if (avp->av_bcbuf != NULL) {
 		struct ath_buf *bf;
 
 		if (avp->av_bslot != -1) {
-			sc->sc_bslot[avp->av_bslot] = ATH_IF_ID_ANY;
+			sc->beacon.bslot[avp->av_bslot] = ATH_IF_ID_ANY;
 			sc->sc_nbcnvaps--;
 		}
 
@@ -444,19 +435,12 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
 			dev_kfree_skb_any(skb);
 			bf->bf_mpdu = NULL;
 		}
-		list_add_tail(&bf->list, &sc->sc_bbuf);
+		list_add_tail(&bf->list, &sc->beacon.bbuf);
 
 		avp->av_bcbuf = NULL;
 	}
 }
 
-/*
- * Tasklet for Sending Beacons
- *
- * Transmit one or more beacon frames at SWBA.  Dynamic updates to the frame
- * contents are done as needed and the slot time is also adjusted based on
- * current state.
-*/
 void ath9k_beacon_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
@@ -473,9 +457,7 @@ void ath9k_beacon_tasklet(unsigned long data)
 
 	if (sc->sc_flags & SC_OP_NO_RESET) {
 		show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
-							    &rx_clear,
-							    &rx_frame,
-							    &tx_frame);
+					    &rx_clear, &rx_frame, &tx_frame);
 	}
 
 	/*
@@ -487,67 +469,65 @@ void ath9k_beacon_tasklet(unsigned long data)
 	 *
 	 * FIXME: Clean up this mess !!
 	 */
-	if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) {
-		sc->sc_bmisscount++;
+	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
+		sc->beacon.bmisscnt++;
 		/* XXX: doth needs the chanchange IE countdown decremented.
 		 *      We should consider adding a mac80211 call to indicate
 		 *      a beacon miss so appropriate action could be taken
 		 *      (in that layer).
 		 */
-		if (sc->sc_bmisscount < BSTUCK_THRESH) {
+		if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
 			if (sc->sc_flags & SC_OP_NO_RESET) {
 				DPRINTF(sc, ATH_DBG_BEACON,
-					"%s: missed %u consecutive beacons\n",
-					__func__, sc->sc_bmisscount);
+					"missed %u consecutive beacons\n",
+					sc->beacon.bmisscnt);
 				if (show_cycles) {
 					/*
 					 * Display cycle counter stats from HW
 					 * to aide in debug of stickiness.
 					 */
 					DPRINTF(sc, ATH_DBG_BEACON,
-						"%s: busy times: rx_clear=%d, "
+						"busy times: rx_clear=%d, "
 						"rx_frame=%d, tx_frame=%d\n",
-						__func__, rx_clear, rx_frame,
+						rx_clear, rx_frame,
 						tx_frame);
 				} else {
 					DPRINTF(sc, ATH_DBG_BEACON,
-						"%s: unable to obtain "
-						"busy times\n", __func__);
+						"unable to obtain "
+						"busy times\n");
 				}
 			} else {
 				DPRINTF(sc, ATH_DBG_BEACON,
-					"%s: missed %u consecutive beacons\n",
-					__func__, sc->sc_bmisscount);
+					"missed %u consecutive beacons\n",
+					sc->beacon.bmisscnt);
 			}
-		} else if (sc->sc_bmisscount >= BSTUCK_THRESH) {
+		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
 			if (sc->sc_flags & SC_OP_NO_RESET) {
-				if (sc->sc_bmisscount == BSTUCK_THRESH) {
+				if (sc->beacon.bmisscnt == BSTUCK_THRESH) {
 					DPRINTF(sc, ATH_DBG_BEACON,
-						"%s: beacon is officially "
-						"stuck\n", __func__);
-					ath9k_hw_dmaRegDump(ah);
+						"beacon is officially "
+						"stuck\n");
 				}
 			} else {
 				DPRINTF(sc, ATH_DBG_BEACON,
-					"%s: beacon is officially stuck\n",
-					__func__);
+					"beacon is officially stuck\n");
 				ath_bstuck_process(sc);
 			}
 		}
 		return;
 	}
 
-	if (sc->sc_bmisscount != 0) {
+	if (sc->beacon.bmisscnt != 0) {
 		if (sc->sc_flags & SC_OP_NO_RESET) {
 			DPRINTF(sc, ATH_DBG_BEACON,
-				"%s: resume beacon xmit after %u misses\n",
-				__func__, sc->sc_bmisscount);
+				"resume beacon xmit after %u misses\n",
+				sc->beacon.bmisscnt);
 		} else {
 			DPRINTF(sc, ATH_DBG_BEACON,
-				"%s: resume beacon xmit after %u misses\n",
-				__func__, sc->sc_bmisscount);
+				"resume beacon xmit after %u misses\n",
+				sc->beacon.bmisscnt);
 		}
-		sc->sc_bmisscount = 0;
+		sc->beacon.bmisscnt = 0;
 	}
 
 	/*
@@ -562,11 +542,11 @@ void ath9k_beacon_tasklet(unsigned long data)
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf);
 	slot = ((tsftu % intval) * ATH_BCBUF) / intval;
-	if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF];
+	if_id = sc->beacon.bslot[(slot + 1) % ATH_BCBUF];
 
 	DPRINTF(sc, ATH_DBG_BEACON,
-		"%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
-		__func__, slot, (unsigned long long)tsf, tsftu,
+		"slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
+		slot, (unsigned long long)tsf, tsftu,
 		intval, if_id);
 
 	bfaddr = 0;
@@ -594,48 +574,34 @@ void ath9k_beacon_tasklet(unsigned long data)
 	 *     set to ATH_BCBUF so this check is a noop.
 	 */
 	/* XXX locking */
-	if (sc->sc_updateslot == UPDATE) {
-		sc->sc_updateslot = COMMIT; /* commit next beacon */
-		sc->sc_slotupdate = slot;
-	} else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
-		ath_setslottime(sc);        /* commit change to hardware */
-
+	if (sc->beacon.updateslot == UPDATE) {
+		sc->beacon.updateslot = COMMIT; /* commit next beacon */
+		sc->beacon.slotupdate = slot;
+	} else if (sc->beacon.updateslot == COMMIT && sc->beacon.slotupdate == slot) {
+		ath9k_hw_setslottime(sc->sc_ah, sc->beacon.slottime);
+		sc->beacon.updateslot = OK;
+	}
 	if (bfaddr != 0) {
 		/*
 		 * Stop any current dma and put the new frame(s) on the queue.
 		 * This should never fail since we check above that no frames
 		 * are still pending on the queue.
 		 */
-		if (!ath9k_hw_stoptxdma(ah, sc->sc_bhalq)) {
+		if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
 			DPRINTF(sc, ATH_DBG_FATAL,
-				"%s: beacon queue %u did not stop?\n",
-				__func__, sc->sc_bhalq);
+				"beacon queue %u did not stop?\n", sc->beacon.beaconq);
 			/* NB: the HAL still stops DMA, so proceed */
 		}
 
 		/* NB: cabq traffic should already be queued and primed */
-		ath9k_hw_puttxbuf(ah, sc->sc_bhalq, bfaddr);
-		ath9k_hw_txstart(ah, sc->sc_bhalq);
+		ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bfaddr);
+		ath9k_hw_txstart(ah, sc->beacon.beaconq);
 
-		sc->ast_be_xmit += bc;     /* XXX per-vap? */
+		sc->beacon.ast_be_xmit += bc;     /* XXX per-vap? */
 	}
 }
 
 /*
- *  Tasklet for Beacon Stuck processing
- *
- *  Processing for Beacon Stuck.
- *  Basically resets the chip.
-*/
-void ath_bstuck_process(struct ath_softc *sc)
-{
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"%s: stuck beacon; resetting (bmiss count %u)\n",
-		__func__, sc->sc_bmisscount);
-	ath_reset(sc, false);
-}
-
-/*
  * Configure the beacon and sleep timers.
  *
  * When operating as an AP this resets the TSF and sets
@@ -652,15 +618,21 @@ void ath_bstuck_process(struct ath_softc *sc)
  */
 void ath_beacon_config(struct ath_softc *sc, int if_id)
 {
+	struct ieee80211_vif *vif;
 	struct ath_hal *ah = sc->sc_ah;
 	struct ath_beacon_config conf;
-	enum ath9k_opmode av_opmode;
+	struct ath_vap *avp;
+	enum nl80211_iftype opmode;
 	u32 nexttbtt, intval;
 
-	if (if_id != ATH_IF_ID_ANY)
-		av_opmode = sc->sc_vaps[if_id]->av_opmode;
-	else
-		av_opmode = sc->sc_ah->ah_opmode;
+	if (if_id != ATH_IF_ID_ANY) {
+		vif = sc->sc_vaps[if_id];
+		ASSERT(vif);
+		avp = (void *)vif->drv_priv;
+		opmode = avp->av_opmode;
+	} else {
+		opmode = sc->sc_ah->ah_opmode;
+	}
 
 	memset(&conf, 0, sizeof(struct ath_beacon_config));
 
@@ -672,10 +644,10 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 	conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
 
 	/* extract tstamp from last beacon and convert to TU */
-	nexttbtt = TSF_TO_TU(sc->bc_tstamp >> 32, sc->bc_tstamp);
+	nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
 
 	/* XXX conditionalize multi-bss support? */
-	if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) {
+	if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
 		/*
 		 * For multi-bss ap support beacons are either staggered
 		 * evenly over N slots or burst together.  For the former
@@ -694,11 +666,11 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 	else if (intval)	/* NB: can be 0 for monitor mode */
 		nexttbtt = roundup(nexttbtt, intval);
 
-	DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
-		__func__, nexttbtt, intval, conf.beacon_interval);
+	DPRINTF(sc, ATH_DBG_BEACON, "nexttbtt %u intval %u (%u)\n",
+		nexttbtt, intval, conf.beacon_interval);
 
-	/* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */
-	if (sc->sc_ah->ah_opmode == ATH9K_M_STA) {
+	/* Check for NL80211_IFTYPE_AP and sc_nostabeacons for WDS client */
+	if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) {
 		struct ath9k_beacon_state bs;
 		u64 tsf;
 		u32 tsftu;
@@ -782,7 +754,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 			bs.bs_sleepduration = bs.bs_dtimperiod;
 
 		DPRINTF(sc, ATH_DBG_BEACON,
-			"%s: tsf %llu "
+			"tsf %llu "
 			"tsf:tu %u "
 			"intval %u "
 			"nexttbtt %u "
@@ -794,7 +766,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 			"maxdur %u "
 			"next %u "
 			"timoffset %u\n",
-			__func__,
 			(unsigned long long)tsf, tsftu,
 			bs.bs_intval,
 			bs.bs_nexttbtt,
@@ -818,7 +789,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 		ath9k_hw_set_interrupts(ah, 0);
 		if (nexttbtt == intval)
 			intval |= ATH9K_BEACON_RESET_TSF;
-		if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS) {
+		if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) {
 			/*
 			 * Pull nexttbtt forward to reflect the current
 			 * TSF
@@ -834,8 +805,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 			}
 #undef FUDGE
 			DPRINTF(sc, ATH_DBG_BEACON,
-				"%s: IBSS nexttbtt %u intval %u (%u)\n",
-				__func__, nexttbtt,
+				"IBSS nexttbtt %u intval %u (%u)\n",
+				nexttbtt,
 				intval & ~ATH9K_BEACON_RESET_TSF,
 				conf.beacon_interval);
 
@@ -850,7 +821,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 			if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
 				sc->sc_imask |= ATH9K_INT_SWBA;
 			ath_beaconq_config(sc);
-		} else if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) {
+		} else if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
 			/*
 			 * In AP mode we enable the beacon timers and
 			 * SWBA interrupts to prepare beacon frames.
@@ -860,20 +831,18 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
 			ath_beaconq_config(sc);
 		}
 		ath9k_hw_beaconinit(ah, nexttbtt, intval);
-		sc->sc_bmisscount = 0;
+		sc->beacon.bmisscnt = 0;
 		ath9k_hw_set_interrupts(ah, sc->sc_imask);
 		/*
 		 * When using a self-linked beacon descriptor in
 		 * ibss mode load it once here.
 		 */
-		if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS &&
+		if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC &&
 		    (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
 			ath_beacon_start_adhoc(sc, 0);
 	}
 }
 
-/* Function to collect beacon rssi data and resync beacon if necessary */
-
 void ath_beacon_sync(struct ath_softc *sc, int if_id)
 {
 	/*