diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/recv.c')
-rw-r--r-- | drivers/net/wireless/ath9k/recv.c | 47 |
1 files changed, 29 insertions, 18 deletions
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index e49e32356e9..7a455468823 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -105,8 +105,7 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len) skb_reserve(skb, sc->sc_cachelsz - off); } else { DPRINTF(sc, ATH_DBG_FATAL, - "%s: skbuff alloc of size %u failed\n", - __func__, len); + "skbuff alloc of size %u failed\n", len); return NULL; } @@ -166,7 +165,7 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, * discard the frame. Enable this if you want to see * error frames in Monitor mode. */ - if (sc->sc_ah->ah_opmode != ATH9K_M_MONITOR) + if (sc->sc_ah->ah_opmode != NL80211_IFTYPE_MONITOR) goto rx_next; } else if (ds->ds_rxstat.rs_status != 0) { if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC) @@ -192,7 +191,7 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR) { + if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_MONITOR) { if (ds->ds_rxstat.rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) @@ -263,11 +262,7 @@ static void ath_opmode_init(struct ath_softc *sc) /* calculate and install multicast filter */ mfilt[0] = mfilt[1] = ~0; - ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]); - DPRINTF(sc, ATH_DBG_CONFIG , - "%s: RX filter 0x%x, MC filter %08x:%08x\n", - __func__, rfilt, mfilt[0], mfilt[1]); } int ath_rx_init(struct ath_softc *sc, int nbufs) @@ -285,8 +280,8 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) min(sc->sc_cachelsz, (u16)64)); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: cachelsz %u rxbufsize %u\n", - __func__, sc->sc_cachelsz, sc->sc_rxbufsize); + DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n", + sc->sc_cachelsz, sc->sc_rxbufsize); /* Initialize rx descriptors */ @@ -294,8 +289,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) "rx", nbufs, 1); if (error != 0) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: failed to allocate rx descriptors: %d\n", - __func__, error); + "failed to allocate rx descriptors: %d\n", error); break; } @@ -310,6 +304,15 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(sc->pdev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(skb); + bf->bf_mpdu = NULL; + DPRINTF(sc, ATH_DBG_CONFIG, + "pci_dma_mapping_error() on RX init\n"); + error = -ENOMEM; + break; + } bf->bf_dmacontext = bf->bf_buf_addr; } sc->sc_rxlink = NULL; @@ -367,25 +370,25 @@ u32 ath_calcrxfilter(struct ath_softc *sc) | ATH9K_RX_FILTER_MCAST; /* If not a STA, enable processing of Probe Requests */ - if (sc->sc_ah->ah_opmode != ATH9K_M_STA) + if (sc->sc_ah->ah_opmode != NL80211_IFTYPE_STATION) rfilt |= ATH9K_RX_FILTER_PROBEREQ; /* Can't set HOSTAP into promiscous mode */ - if (((sc->sc_ah->ah_opmode != ATH9K_M_HOSTAP) && + if (((sc->sc_ah->ah_opmode != NL80211_IFTYPE_AP) && (sc->rx_filter & FIF_PROMISC_IN_BSS)) || - (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR)) { + (sc->sc_ah->ah_opmode == NL80211_IFTYPE_MONITOR)) { rfilt |= ATH9K_RX_FILTER_PROM; /* ??? To prevent from sending ACK */ rfilt &= ~ATH9K_RX_FILTER_UCAST; } - if (sc->sc_ah->ah_opmode == ATH9K_M_STA || - sc->sc_ah->ah_opmode == ATH9K_M_IBSS) + if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION || + sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) rfilt |= ATH9K_RX_FILTER_BEACON; /* If in HOSTAP mode, want to enable reception of PSPOLL frames & beacon frames */ - if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) + if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL); return rfilt; @@ -595,6 +598,14 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) bf->bf_buf_addr = pci_map_single(sc->pdev, requeue_skb->data, sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(sc->pdev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(requeue_skb); + bf->bf_mpdu = NULL; + DPRINTF(sc, ATH_DBG_CONFIG, + "pci_dma_mapping_error() on RX\n"); + break; + } bf->bf_dmacontext = bf->bf_buf_addr; /* |