diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/xmit.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/xmit.c | 173 |
1 files changed, 72 insertions, 101 deletions
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 04f94d2c801..a18cea69904 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -60,79 +60,6 @@ static u32 bits_per_symbol[][2] = { #define IS_HT_RATE(_rate) ((_rate) & 0x80) /* - * Insert a chain of ath_buf (descriptors) on a multicast txq - * but do NOT start tx DMA on this queue. - * NB: must be called with txq lock held - */ - -static void ath_tx_mcastqaddbuf(struct ath_softc *sc, - struct ath_txq *txq, - struct list_head *head) -{ - struct ath_hal *ah = sc->sc_ah; - struct ath_buf *bf; - - if (list_empty(head)) - return; - - /* - * Insert the frame on the outbound list and - * pass it on to the hardware. - */ - bf = list_first_entry(head, struct ath_buf, list); - - /* - * The CAB queue is started from the SWBA handler since - * frames only go out on DTIM and to avoid possible races. - */ - ath9k_hw_set_interrupts(ah, 0); - - /* - * If there is anything in the mcastq, we want to set - * the "more data" bit in the last item in the queue to - * indicate that there is "more data". It makes sense to add - * it here since you are *always* going to have - * more data when adding to this queue, no matter where - * you call from. - */ - - if (txq->axq_depth) { - struct ath_buf *lbf; - struct ieee80211_hdr *hdr; - - /* - * Add the "more data flag" to the last frame - */ - - lbf = list_entry(txq->axq_q.prev, struct ath_buf, list); - hdr = (struct ieee80211_hdr *) - ((struct sk_buff *)(lbf->bf_mpdu))->data; - hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } - - /* - * Now, concat the frame onto the queue - */ - list_splice_tail_init(head, &txq->axq_q); - txq->axq_depth++; - txq->axq_totalqueued++; - txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list); - - DPRINTF(sc, ATH_DBG_QUEUE, - "%s: txq depth = %d\n", __func__, txq->axq_depth); - if (txq->axq_link != NULL) { - *txq->axq_link = bf->bf_daddr; - DPRINTF(sc, ATH_DBG_XMIT, - "%s: link[%u](%p)=%llx (%p)\n", - __func__, - txq->axq_qnum, txq->axq_link, - ito64(bf->bf_daddr), bf->bf_desc); - } - txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link); - ath9k_hw_set_interrupts(ah, sc->sc_imask); -} - -/* * Insert a chain of ath_buf (descriptors) on a txq and * assume the descriptors are already chained together by caller. * NB: must be called with txq lock held @@ -277,8 +204,6 @@ static int ath_tx_prepare(struct ath_softc *sc, __le16 fc; u8 *qc; - memset(txctl, 0, sizeof(struct ath_tx_control)); - txctl->dev = sc; hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -329,12 +254,18 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill qnum */ - txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); - txq = &sc->sc_txq[txctl->qnum]; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) { + txctl->qnum = 0; + txq = sc->sc_cabq; + } else { + txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); + txq = &sc->sc_txq[txctl->qnum]; + } spin_lock_bh(&txq->axq_lock); /* Try to avoid running out of descriptors */ - if (txq->axq_depth >= (ATH_TXBUF - 20)) { + if (txq->axq_depth >= (ATH_TXBUF - 20) && + !(txctl->flags & ATH9K_TXDESC_CAB)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: TX queue: %d is full, depth: %d\n", __func__, @@ -354,7 +285,7 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill flags */ - txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ + txctl->flags |= ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; @@ -1982,13 +1913,18 @@ static int ath_tx_start_dma(struct ath_softc *sc, struct list_head bf_head; struct ath_desc *ds; struct ath_hal *ah = sc->sc_ah; - struct ath_txq *txq = &sc->sc_txq[txctl->qnum]; + struct ath_txq *txq; struct ath_tx_info_priv *tx_info_priv; struct ath_rc_series *rcs; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); __le16 fc = hdr->frame_control; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) + txq = sc->sc_cabq; + else + txq = &sc->sc_txq[txctl->qnum]; + /* For each sglist entry, allocate an ath_buf for DMA */ INIT_LIST_HEAD(&bf_head); spin_lock_bh(&sc->sc_txbuflock); @@ -2093,27 +2029,7 @@ static int ath_tx_start_dma(struct ath_softc *sc, bf->bf_tidno = txctl->tidno; } - if (is_multicast_ether_addr(hdr->addr1)) { - struct ath_vap *avp = sc->sc_vaps[txctl->if_id]; - - /* - * When servicing one or more stations in power-save - * mode (or) if there is some mcast data waiting on - * mcast queue (to prevent out of order delivery of - * mcast,bcast packets) multicast frames must be - * buffered until after the beacon. We use the private - * mcast queue for that. - */ - /* XXX? more bit in 802.11 frame header */ - spin_lock_bh(&avp->av_mcastq.axq_lock); - if (txctl->ps || avp->av_mcastq.axq_depth) - ath_tx_mcastqaddbuf(sc, - &avp->av_mcastq, &bf_head); - else - ath_tx_txqaddbuf(sc, txq, &bf_head); - spin_unlock_bh(&avp->av_mcastq.axq_lock); - } else - ath_tx_txqaddbuf(sc, txq, &bf_head); + ath_tx_txqaddbuf(sc, txq, &bf_head); } spin_unlock_bh(&txq->axq_lock); return 0; @@ -2407,6 +2323,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) struct ath_tx_control txctl; int error = 0; + memset(&txctl, 0, sizeof(struct ath_tx_control)); error = ath_tx_prepare(sc, skb, &txctl); if (error == 0) /* @@ -2871,3 +2788,57 @@ void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) } } } + +void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb) +{ + int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ath_tx_control txctl; + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) { + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ padding " + "failed\n", __func__); + dev_kfree_skb_any(skb); + return; + } + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting CABQ packet, skb: %p\n", + __func__, + skb); + + memset(&txctl, 0, sizeof(struct ath_tx_control)); + txctl.flags = ATH9K_TXDESC_CAB; + if (ath_tx_prepare(sc, skb, &txctl) == 0) { + /* + * Start DMA mapping. + * ath_tx_start_dma() will be called either synchronously + * or asynchrounsly once DMA is complete. + */ + xmit_map_sg(sc, skb, &txctl); + } else { + ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ failed\n", __func__); + dev_kfree_skb_any(skb); + } +} + |