diff options
Diffstat (limited to 'drivers/net/wireless/ath')
-rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 143 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ath9k.h | 6 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hif_usb.c | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/init.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/mac.c | 5 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ath/carl9170/usb.c | 2 |
7 files changed, 98 insertions, 83 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 78c26fdccad..62ce2f4e860 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } +/* + * Wait for synth to settle + */ +static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + udelay(100 + delay); + } else { + mdelay(1); + } +} + /**********************\ * RF Gain optimization * @@ -1253,6 +1281,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; @@ -3237,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Failed */ if (i >= 100) return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } /* @@ -3251,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + /* * For 5210 we do all initialization using * initvals, so we don't have to modify * any settings (5210 also only supports * a/aturbo modes) */ - if ((ah->ah_version != AR5K_AR5210) && !fast) { + if (ah->ah_version != AR5K_AR5210) { /* * Write initial RF gain settings @@ -3276,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { @@ -3322,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + ath5k_hw_wait_for_synth(ah, channel); + /* - * On 5211+ read activation -> rx delay - * and use it. + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) - delay = delay << 1; - if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) - delay = delay << 2; - /* XXX: /2 on turbo ? Let's be safe - * for now */ - udelay(100 + delay); - } else { - mdelay(1); - } - - if (fast) - /* - * Release RF Bus grant - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, - AR5K_PHY_RFBUS_REQ_REQUEST); - else { - /* - * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); /* * Start automatic gain control calibration diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 23838e37d45..1a7fa6ea4cf 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,7 +21,6 @@ #include <linux/device.h> #include <linux/leds.h> #include <linux/completion.h> -#include <linux/pm_qos_params.h> #include "debug.h" #include "common.h" @@ -57,8 +56,6 @@ struct ath_node; #define A_MAX(a, b) ((a) > (b) ? (a) : (b)) -#define ATH9K_PM_QOS_DEFAULT_VALUE 55 - #define TSF_TO_TU(_h,_l) \ ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) @@ -633,8 +630,6 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; - - struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) extern struct ieee80211_ops ath9k_ops; extern int ath9k_modparam_nohwcrypt; extern int led_blink; -extern int ath9k_pm_qos_value; extern bool is_ath9k_unloaded; irqreturn_t ath_isr(int irq, void *dev); diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 5ab3084eb9c..07b1633b7f3 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -219,8 +219,9 @@ static int __hif_usb_tx(struct hif_device_usb *hif_dev) struct tx_buf *tx_buf = NULL; struct sk_buff *nskb = NULL; int ret = 0, i; - u16 *hdr, tx_skb_cnt = 0; + u16 tx_skb_cnt = 0; u8 *buf; + __le16 *hdr; if (hif_dev->tx.tx_skb_cnt == 0) return 0; @@ -245,9 +246,9 @@ static int __hif_usb_tx(struct hif_device_usb *hif_dev) buf = tx_buf->buf; buf += tx_buf->offset; - hdr = (u16 *)buf; - *hdr++ = nskb->len; - *hdr++ = ATH_USB_TX_STREAM_MODE_TAG; + hdr = (__le16 *)buf; + *hdr++ = cpu_to_le16(nskb->len); + *hdr++ = cpu_to_le16(ATH_USB_TX_STREAM_MODE_TAG); buf += 4; memcpy(buf, nskb->data, nskb->len); tx_buf->len = nskb->len + 4; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 087a6a95edd..a033d01bf8a 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -41,10 +41,6 @@ static int ath9k_btcoex_enable; module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); -int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE; -module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH); -MODULE_PARM_DESC(pmqos, "User specified PM-QOS value"); - bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); - return 0; error_world: @@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 180170d3ce2..2915b11edef 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -885,7 +885,7 @@ void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints) struct ath_common *common = ath9k_hw_common(ah); if (!(ints & ATH9K_INT_GLOBAL)) - ath9k_hw_enable_interrupts(ah); + ath9k_hw_disable_interrupts(ah); ath_dbg(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints); @@ -963,7 +963,8 @@ void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints) REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER); } - ath9k_hw_enable_interrupts(ah); + if (ints & ATH9K_INT_GLOBAL) + ath9k_hw_enable_interrupts(ah); return; } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index da5c64597c1..a09d15f7aa6 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1173,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - /* User has the option to provide pm-qos value as a module - * parameter rather than using the default value of - * 'ATH9K_PM_QOS_DEFAULT_VALUE'. - */ - pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value); - if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en) common->bus_ops->extn_synch_en(common); @@ -1345,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); - mutex_unlock(&sc->mutex); ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n"); diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 537732e5964..f82c400be28 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -118,6 +118,8 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x057c, 0x8402) }, /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ { USB_DEVICE(0x1668, 0x1200) }, + /* Airlive X.USB a/b/g/n */ + { USB_DEVICE(0x1b75, 0x9170) }, /* terminate */ {} |