summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
-rw-r--r--drivers/net/wireless/b43/main.c225
1 files changed, 176 insertions, 49 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index fc23ba5309b..f9c14c66434 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1368,18 +1368,18 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
unsigned int rate;
u16 ctl;
int antenna;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
len = min((size_t) dev->wl->current_beacon->len,
0x200 - sizeof(struct b43_plcp_hdr6));
- rate = dev->wl->beacon_txctl.tx_rate->hw_value;
+ rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
b43_write_template_common(dev, (const u8 *)bcn,
len, ram_offset, shm_size_offset, rate);
/* Write the PHY TX control parameters. */
- antenna = b43_antenna_from_ieee80211(dev,
- dev->wl->beacon_txctl.antenna_sel_tx);
+ antenna = b43_antenna_from_ieee80211(dev, info->antenna_sel_tx);
antenna = b43_antenna_to_phyctl(antenna);
ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
@@ -1430,11 +1430,17 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
i += ie_len + 2;
}
if (!tim_found) {
- b43warn(dev->wl, "Did not find a valid TIM IE in "
- "the beacon template packet. AP or IBSS operation "
- "may be broken.\n");
- } else
- b43dbg(dev->wl, "Updated beacon template\n");
+ /*
+ * If ucode wants to modify TIM do it behind the beacon, this
+ * will happen, for example, when doing mesh networking.
+ */
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_TIMBPOS,
+ len + sizeof(struct b43_plcp_hdr6));
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_DTIMPER, 0);
+ }
+ b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
}
static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
@@ -1549,7 +1555,8 @@ static void handle_irq_beacon(struct b43_wldev *dev)
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
- if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) &&
+ !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
return;
/* This is the bottom half of the asynchronous beacon update. */
@@ -1613,8 +1620,7 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
/* Asynchronously update the packet templates in template RAM.
* Locking: Requires wl->irq_lock to be locked. */
-static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon,
- const struct ieee80211_tx_control *txctl)
+static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon)
{
/* This is the top half of the ansynchronous beacon update.
* The bottom half is the beacon IRQ.
@@ -1625,7 +1631,6 @@ static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon,
if (wl->current_beacon)
dev_kfree_skb_any(wl->current_beacon);
wl->current_beacon = beacon;
- memcpy(&wl->beacon_txctl, txctl, sizeof(wl->beacon_txctl));
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
@@ -1664,9 +1669,100 @@ static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
+static void b43_handle_firmware_panic(struct b43_wldev *dev)
+{
+ u16 reason;
+
+ /* Read the register that contains the reason code for the panic. */
+ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
+ b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);
+
+ switch (reason) {
+ default:
+ b43dbg(dev->wl, "The panic reason is unknown.\n");
+ /* fallthrough */
+ case B43_FWPANIC_DIE:
+ /* Do not restart the controller or firmware.
+ * The device is nonfunctional from now on.
+ * Restarting would result in this panic to trigger again,
+ * so we avoid that recursion. */
+ break;
+ case B43_FWPANIC_RESTART:
+ b43_controller_restart(dev, "Microcode panic");
+ break;
+ }
+}
+
static void handle_irq_ucode_debug(struct b43_wldev *dev)
{
- //TODO
+ unsigned int i, cnt;
+ u16 reason, marker_id, marker_line;
+ __le16 *buf;
+
+ /* The proprietary firmware doesn't have this IRQ. */
+ if (!dev->fw.opensource)
+ return;
+
+ /* Read the register that contains the reason code for this IRQ. */
+ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);
+
+ switch (reason) {
+ case B43_DEBUGIRQ_PANIC:
+ b43_handle_firmware_panic(dev);
+ break;
+ case B43_DEBUGIRQ_DUMP_SHM:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ buf = kmalloc(4096, GFP_ATOMIC);
+ if (!buf) {
+ b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
+ goto out;
+ }
+ for (i = 0; i < 4096; i += 2) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
+ buf[i / 2] = cpu_to_le16(tmp);
+ }
+ b43info(dev->wl, "Shared memory dump:\n");
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
+ 16, 2, buf, 4096, 1);
+ kfree(buf);
+ break;
+ case B43_DEBUGIRQ_DUMP_REGS:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ b43info(dev->wl, "Microcode register dump:\n");
+ for (i = 0, cnt = 0; i < 64; i++) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
+ if (cnt == 0)
+ printk(KERN_INFO);
+ printk("r%02u: 0x%04X ", i, tmp);
+ cnt++;
+ if (cnt == 6) {
+ printk("\n");
+ cnt = 0;
+ }
+ }
+ printk("\n");
+ break;
+ case B43_DEBUGIRQ_MARKER:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
+ B43_MARKER_ID_REG);
+ marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
+ B43_MARKER_LINE_REG);
+ b43info(dev->wl, "The firmware just executed the MARKER(%u) "
+ "at line number %u\n",
+ marker_id, marker_line);
+ break;
+ default:
+ b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
+ reason);
+ }
+out:
+ /* Acknowledge the debug-IRQ, so the firmware can continue. */
+ b43_shm_write16(dev, B43_SHM_SCRATCH,
+ B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
}
/* Interrupt handler bottom-half */
@@ -1853,7 +1949,8 @@ static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
static int do_request_fw(struct b43_wldev *dev,
const char *name,
- struct b43_firmware_file *fw)
+ struct b43_firmware_file *fw,
+ bool silent)
{
char path[sizeof(modparam_fwpostfix) + 32];
const struct firmware *blob;
@@ -1877,9 +1974,15 @@ static int do_request_fw(struct b43_wldev *dev,
"b43%s/%s.fw",
modparam_fwpostfix, name);
err = request_firmware(&blob, path, dev->dev->dev);
- if (err) {
- b43err(dev->wl, "Firmware file \"%s\" not found "
- "or load failed.\n", path);
+ if (err == -ENOENT) {
+ if (!silent) {
+ b43err(dev->wl, "Firmware file \"%s\" not found\n",
+ path);
+ }
+ return err;
+ } else if (err) {
+ b43err(dev->wl, "Firmware file \"%s\" request failed (err=%d)\n",
+ path, err);
return err;
}
if (blob->size < sizeof(struct b43_fw_header))
@@ -1930,7 +2033,7 @@ static int b43_request_firmware(struct b43_wldev *dev)
filename = "ucode13";
else
goto err_no_ucode;
- err = do_request_fw(dev, filename, &fw->ucode);
+ err = do_request_fw(dev, filename, &fw->ucode, 0);
if (err)
goto err_load;
@@ -1941,8 +2044,13 @@ static int b43_request_firmware(struct b43_wldev *dev)
filename = NULL;
else
goto err_no_pcm;
- err = do_request_fw(dev, filename, &fw->pcm);
- if (err)
+ fw->pcm_request_failed = 0;
+ err = do_request_fw(dev, filename, &fw->pcm, 1);
+ if (err == -ENOENT) {
+ /* We did not find a PCM file? Not fatal, but
+ * core rev <= 10 must do without hwcrypto then. */
+ fw->pcm_request_failed = 1;
+ } else if (err)
goto err_load;
/* Get initvals */
@@ -1960,7 +2068,7 @@ static int b43_request_firmware(struct b43_wldev *dev)
if ((rev >= 5) && (rev <= 10))
filename = "b0g0initvals5";
else if (rev >= 13)
- filename = "lp0initvals13";
+ filename = "b0g0initvals13";
else
goto err_no_initvals;
break;
@@ -1973,7 +2081,7 @@ static int b43_request_firmware(struct b43_wldev *dev)
default:
goto err_no_initvals;
}
- err = do_request_fw(dev, filename, &fw->initvals);
+ err = do_request_fw(dev, filename, &fw->initvals, 0);
if (err)
goto err_load;
@@ -2007,7 +2115,7 @@ static int b43_request_firmware(struct b43_wldev *dev)
default:
goto err_no_initvals;
}
- err = do_request_fw(dev, filename, &fw->initvals_band);
+ err = do_request_fw(dev, filename, &fw->initvals_band, 0);
if (err)
goto err_load;
@@ -2124,14 +2232,28 @@ static int b43_upload_microcode(struct b43_wldev *dev)
err = -EOPNOTSUPP;
goto error;
}
- b43info(dev->wl, "Loading firmware version %u.%u "
- "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
- fwrev, fwpatch,
- (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
- (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
-
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
+ dev->fw.opensource = (fwdate == 0xFFFF);
+
+ if (dev->fw.opensource) {
+ /* Patchlevel info is encoded in the "time" field. */
+ dev->fw.patch = fwtime;
+ b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
+ dev->fw.rev, dev->fw.patch,
+ dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
+ } else {
+ b43info(dev->wl, "Loading firmware version %u.%u "
+ "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
+ fwrev, fwpatch,
+ (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
+ (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
+ if (dev->fw.pcm_request_failed) {
+ b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
+ "Hardware accelerated cryptography is disabled.\n");
+ b43_print_fw_helptext(dev->wl, 0);
+ }
+ }
if (b43_is_old_txhdr_format(dev)) {
b43warn(dev->wl, "You are using an old firmware image. "
@@ -2376,7 +2498,8 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
ctl &= ~B43_MACCTL_BEACPROMISC;
ctl |= B43_MACCTL_INFRA;
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
ctl |= B43_MACCTL_AP;
else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
ctl &= ~B43_MACCTL_INFRA;
@@ -2813,8 +2936,7 @@ static int b43_rng_init(struct b43_wl *wl)
}
static int b43_op_tx(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_tx_control *ctl)
+ struct sk_buff *skb)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
@@ -2836,9 +2958,9 @@ static int b43_op_tx(struct ieee80211_hw *hw,
err = -ENODEV;
if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
if (b43_using_pio_transfers(dev))
- err = b43_pio_tx(dev, skb, ctl);
+ err = b43_pio_tx(dev, skb);
else
- err = b43_dma_tx(dev, skb, ctl);
+ err = b43_dma_tx(dev, skb);
}
read_unlock_irqrestore(&wl->tx_lock, flags);
@@ -3244,8 +3366,9 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
b43_set_rx_antenna(dev, antenna);
- /* Update templates for AP mode. */
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ /* Update templates for AP/mesh mode. */
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
@@ -3296,6 +3419,13 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
goto out_unlock;
+ if (dev->fw.pcm_request_failed) {
+ /* We don't have firmware for the crypto engine.
+ * Must use software-crypto. */
+ err = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
err = -EINVAL;
switch (key->alg) {
case ALG_WEP:
@@ -3426,13 +3556,12 @@ static int b43_op_config_interface(struct ieee80211_hw *hw,
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
- B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) {
+ B43_WARN_ON(conf->type != wl->if_type);
b43_set_ssid(dev, conf->ssid, conf->ssid_len);
- if (conf->beacon) {
- b43_update_templates(wl, conf->beacon,
- conf->beacon_control);
- }
+ if (conf->beacon)
+ b43_update_templates(wl, conf->beacon);
}
b43_write_mac_bssid_templates(dev);
}
@@ -3497,7 +3626,6 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
/* Start data flow (TX/RX). */
b43_mac_enable(dev);
b43_interrupt_enable(dev, dev->irq_savedstate);
- ieee80211_start_queues(dev->wl->hw);
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
@@ -3970,6 +4098,7 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
/* TODO: allow WDS/AP devices to coexist */
if (conf->type != IEEE80211_IF_TYPE_AP &&
+ conf->type != IEEE80211_IF_TYPE_MESH_POINT &&
conf->type != IEEE80211_IF_TYPE_STA &&
conf->type != IEEE80211_IF_TYPE_WDS &&
conf->type != IEEE80211_IF_TYPE_IBSS)
@@ -4119,31 +4248,29 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
struct b43_wl *wl = hw_to_b43_wl(hw);
struct sk_buff *beacon;
unsigned long flags;
- struct ieee80211_tx_control txctl;
/* We could modify the existing beacon and set the aid bit in
* the TIM field, but that would probably require resizing and
* moving of data within the beacon template.
* Simply request a new beacon and let mac80211 do the hard work. */
- beacon = ieee80211_beacon_get(hw, wl->vif, &txctl);
+ beacon = ieee80211_beacon_get(hw, wl->vif);
if (unlikely(!beacon))
return -ENOMEM;
spin_lock_irqsave(&wl->irq_lock, flags);
- b43_update_templates(wl, beacon, &txctl);
+ b43_update_templates(wl, beacon);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
}
static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
- struct sk_buff *beacon,
- struct ieee80211_tx_control *ctl)
+ struct sk_buff *beacon)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
unsigned long flags;
spin_lock_irqsave(&wl->irq_lock, flags);
- b43_update_templates(wl, beacon, ctl);
+ b43_update_templates(wl, beacon);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-05 00:45:50 +0000