1 files changed, 139 insertions, 4 deletions

diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/nphy.c
index 644eed993be..831986c459f 100644
--- a/drivers/net/wireless/b43/nphy.c
+++ b/drivers/net/wireless/b43/nphy.c
@@ -81,9 +81,8 @@ static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
 	//TODO
 }
 
-/* Tune the hardware to a new channel. Don't call this directly.
- * Use b43_radio_selectchannel() */
-int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel)
+/* Tune the hardware to a new channel. */
+static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
 {
 	const struct b43_nphy_channeltab_entry *tabent;
 
@@ -162,7 +161,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
 	msleep(1);
 	b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F);
 	msleep(1);
-	b43_radio_selectchannel(dev, dev->phy.channel, 0);
+	nphy_channel_switch(dev, dev->phy.channel);
 	b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9);
 	b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9);
 	b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83);
@@ -484,3 +483,139 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
 	return 0;
 }
+
+static int b43_nphy_op_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy;
+
+	nphy = kzalloc(sizeof(*nphy), GFP_KERNEL);
+	if (!nphy)
+		return -ENOMEM;
+	dev->phy.n = nphy;
+
+	//TODO init struct b43_phy_n
+
+	return 0;
+}
+
+static int b43_nphy_op_init(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int err;
+
+	err = b43_phy_initn(dev);
+	if (err)
+		return err;
+	nphy->initialised = 1;
+
+	return 0;
+}
+
+static void b43_nphy_op_exit(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	if (nphy->initialised) {
+		//TODO
+		nphy->initialised = 0;
+	}
+	//TODO
+	kfree(nphy);
+	dev->phy.n = NULL;
+}
+
+static inline void check_phyreg(struct b43_wldev *dev, u16 offset)
+{
+#if B43_DEBUG
+	if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
+		/* OFDM registers are onnly available on A/G-PHYs */
+		b43err(dev->wl, "Invalid OFDM PHY access at "
+		       "0x%04X on N-PHY\n", offset);
+		dump_stack();
+	}
+	if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
+		/* Ext-G registers are only available on G-PHYs */
+		b43err(dev->wl, "Invalid EXT-G PHY access at "
+		       "0x%04X on N-PHY\n", offset);
+		dump_stack();
+	}
+#endif /* B43_DEBUG */
+}
+
+static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+	check_phyreg(dev, reg);
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	check_phyreg(dev, reg);
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	/* Register 1 is a 32-bit register. */
+	B43_WARN_ON(reg == 1);
+	/* N-PHY needs 0x100 for read access */
+	reg |= 0x100;
+
+	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	/* Register 1 is a 32-bit register. */
+	B43_WARN_ON(reg == 1);
+
+	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
+					enum rfkill_state state)
+{//TODO
+}
+
+static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
+				      unsigned int new_channel)
+{
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		if ((new_channel < 1) || (new_channel > 14))
+			return -EINVAL;
+	} else {
+		if (new_channel > 200)
+			return -EINVAL;
+	}
+
+	return nphy_channel_switch(dev, new_channel);
+}
+
+static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev)
+{
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		return 1;
+	return 36;
+}
+
+static void b43_nphy_op_xmitpower(struct b43_wldev *dev)
+{//TODO
+}
+
+const struct b43_phy_operations b43_phyops_n = {
+	.allocate		= b43_nphy_op_allocate,
+	.init			= b43_nphy_op_init,
+	.exit			= b43_nphy_op_exit,
+	.phy_read		= b43_nphy_op_read,
+	.phy_write		= b43_nphy_op_write,
+	.radio_read		= b43_nphy_op_radio_read,
+	.radio_write		= b43_nphy_op_radio_write,
+	.software_rfkill	= b43_nphy_op_software_rfkill,
+	.switch_channel		= b43_nphy_op_switch_channel,
+	.get_default_chan	= b43_nphy_op_get_default_chan,
+	.xmitpower		= b43_nphy_op_xmitpower,
+};