diff options
Diffstat (limited to 'drivers/net/wireless/b43')
| -rw-r--r-- | drivers/net/wireless/b43/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/b43.h | 17 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/dma.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/leds.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/main.c | 83 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/main.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_common.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/pio.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/rfkill.c | 113 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/rfkill.h | 44 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/xmit.c | 5 |
12 files changed, 99 insertions, 186 deletions
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 07a99e3faf9..67f564e3722 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -98,13 +98,6 @@ config B43_LEDS depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43) default y -# This config option automatically enables b43 RFKILL support, -# if it's possible. -config B43_RFKILL - bool - depends on B43 && (RFKILL = y || RFKILL = B43) - default y - # This config option automatically enables b43 HW-RNG support, # if the HW-RNG core is enabled. config B43_HWRNG diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index 281ef831035..da379f4b0c3 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -13,7 +13,7 @@ b43-y += lo.o b43-y += wa.o b43-y += dma.o b43-$(CONFIG_B43_PIO) += pio.o -b43-$(CONFIG_B43_RFKILL) += rfkill.o +b43-y += rfkill.o b43-$(CONFIG_B43_LEDS) += leds.o b43-$(CONFIG_B43_PCMCIA) += pcmcia.o b43-$(CONFIG_B43_DEBUG) += debugfs.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 4e8ad841c3c..f580c2812d9 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -163,6 +163,7 @@ enum { #define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ #define B43_SHM_SH_PCTLWDPOS 0x0008 #define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */ +#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities (Opensource firmware only) */ #define B43_SHM_SH_PHYVER 0x0050 /* PHY version */ #define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */ #define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */ @@ -297,6 +298,10 @@ enum { #define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */ #define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */ +/* Firmware capabilities field in SHM (Opensource firmware only) */ +#define B43_FWCAPA_HWCRYPTO 0x0001 +#define B43_FWCAPA_QOS 0x0002 + /* MacFilter offsets. */ #define B43_MACFILTER_SELF 0x0000 #define B43_MACFILTER_BSSID 0x0003 @@ -596,6 +601,13 @@ struct b43_wl { /* Pointer to the ieee80211 hardware data structure */ struct ieee80211_hw *hw; + /* The number of queues that were registered with the mac80211 subsystem + * initially. This is a backup copy of hw->queues in case hw->queues has + * to be dynamically lowered at runtime (Firmware does not support QoS). + * hw->queues has to be restored to the original value before unregistering + * from the mac80211 subsystem. */ + u16 mac80211_initially_registered_queues; + struct mutex mutex; spinlock_t irq_lock; /* R/W lock for data transmission. @@ -631,9 +643,6 @@ struct b43_wl { char rng_name[30 + 1]; #endif /* CONFIG_B43_HWRNG */ - /* The RF-kill button */ - struct b43_rfkill rfkill; - /* List of all wireless devices on this chip */ struct list_head devlist; u8 nr_devs; @@ -752,6 +761,8 @@ struct b43_wldev { bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ bool radio_hw_enable; /* saved state of radio hardware enabled state */ bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */ + bool qos_enabled; /* TRUE, if QoS is used. */ + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ /* PHY/Radio device. */ struct b43_phy phy; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index eae680b5305..7964cc32b25 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev, { struct b43_dmaring *ring; - if (b43_modparam_qos) { + if (dev->qos_enabled) { /* 0 = highest priority */ switch (queue_prio) { default: diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 9a498d3fc65..c8b317094c3 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -28,6 +28,7 @@ #include "b43.h" #include "leds.h" +#include "rfkill.h" static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index, @@ -164,10 +165,10 @@ static void b43_map_led(struct b43_wldev *dev, snprintf(name, sizeof(name), "b43-%s::radio", wiphy_name(hw->wiphy)); b43_register_led(dev, &dev->led_radio, name, - b43_rfkill_led_name(dev), + ieee80211_get_radio_led_name(hw), led_index, activelow); - /* Sync the RF-kill LED state with the switch state. */ - if (dev->radio_hw_enable) + /* Sync the RF-kill LED state with radio and switch states. */ + if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_WEIRD: diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 1d3e40095ad..6456afebdba 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -80,8 +80,8 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -int b43_modparam_qos = 1; -module_param_named(qos, b43_modparam_qos, int, 0444); +static int modparam_qos = 1; +module_param_named(qos, modparam_qos, int, 0444); MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); static int modparam_btcoex = 1; @@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value) b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); } +/* Read the firmware capabilities bitmask (Opensource firmware only) */ +static u16 b43_fwcapa_read(struct b43_wldev *dev) +{ + B43_WARN_ON(!dev->fw.opensource); + return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA); +} + void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) { u32 low, high; @@ -2307,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev) dev->fw.patch = fwpatch; dev->fw.opensource = (fwdate == 0xFFFF); + /* Default to use-all-queues. */ + dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues; + dev->qos_enabled = !!modparam_qos; + /* Default to firmware/hardware crypto acceleration. */ + dev->hwcrypto_enabled = 1; + if (dev->fw.opensource) { + u16 fwcapa; + /* Patchlevel info is encoded in the "time" field. */ dev->fw.patch = fwtime; - b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", - dev->fw.rev, dev->fw.patch, - dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); + b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n", + dev->fw.rev, dev->fw.patch); + + fwcapa = b43_fwcapa_read(dev); + if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) { + b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n"); + /* Disable hardware crypto and fall back to software crypto. */ + dev->hwcrypto_enabled = 0; + } + if (!(fwcapa & B43_FWCAPA_QOS)) { + b43info(dev->wl, "QoS not supported by firmware\n"); + /* Disable QoS. Tweak hw->queues to 1. It will be restored before + * ieee80211_unregister to make sure the networking core can + * properly free possible resources. */ + dev->wl->hw->queues = 1; + dev->qos_enabled = 0; + } } else { b43info(dev->wl, "Loading firmware version %u.%u " "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", @@ -3627,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; - if (dev->fw.pcm_request_failed) { + if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) { /* We don't have firmware for the crypto engine. * Must use software-crypto. */ err = -EOPNOTSUPP; @@ -4298,7 +4327,6 @@ static int b43_op_start(struct ieee80211_hw *hw) struct b43_wldev *dev = wl->current_dev; int did_init = 0; int err = 0; - bool do_rfkill_exit = 0; /* Kill all old instance specific information to make sure * the card won't use it in the short timeframe between start @@ -4312,18 +4340,12 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; - /* First register RFkill. - * LEDs that are registered later depend on it. */ - b43_rfkill_init(dev); - mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { err = b43_wireless_core_init(dev); - if (err) { - do_rfkill_exit = 1; + if (err) goto out_mutex_unlock; - } did_init = 1; } @@ -4332,17 +4354,16 @@ static int b43_op_start(struct ieee80211_hw *hw) if (err) { if (did_init) b43_wireless_core_exit(dev); - do_rfkill_exit = 1; goto out_mutex_unlock; } } + /* XXX: only do if device doesn't support rfkill irq */ + wiphy_rfkill_start_polling(hw->wiphy); + out_mutex_unlock: mutex_unlock(&wl->mutex); - if (do_rfkill_exit) - b43_rfkill_exit(dev); - return err; } @@ -4351,7 +4372,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - b43_rfkill_exit(dev); cancel_work_sync(&(wl->beacon_update_trigger)); mutex_lock(&wl->mutex); @@ -4433,6 +4453,7 @@ static const struct ieee80211_ops b43_hw_ops = { .sta_notify = b43_op_sta_notify, .sw_scan_start = b43_op_sw_scan_start_notifier, .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .rfkill_poll = b43_rfkill_poll, }; /* Hard-reset the chip. Do not call this directly. @@ -4735,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev) b43err(NULL, "Could not allocate ieee80211 device\n"); goto out; } + wl = hw_to_b43_wl(hw); /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | @@ -4748,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); - hw->queues = b43_modparam_qos ? 4 : 1; + hw->queues = modparam_qos ? 4 : 1; + wl->mac80211_initially_registered_queues = hw->queues; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -4756,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev) else SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); - /* Get and initialize struct b43_wl */ - wl = hw_to_b43_wl(hw); - memset(wl, 0, sizeof(*wl)); + /* Initialize struct b43_wl */ wl->hw = hw; spin_lock_init(&wl->irq_lock); rwlock_init(&wl->tx_lock); @@ -4824,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) + if (wl->current_dev == wldev) { + /* Restore the queues count before unregistering, because firmware detect + * might have modified it. Restoring is important, so the networking + * stack can properly free resources. */ + wl->hw->queues = wl->mac80211_initially_registered_queues; ieee80211_unregister_hw(wl->hw); + } b43_one_core_detach(dev); @@ -4920,7 +4946,7 @@ static struct ssb_driver b43_ssb_driver = { static void b43_print_driverinfo(void) { const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", - *feat_leds = "", *feat_rfkill = ""; + *feat_leds = ""; #ifdef CONFIG_B43_PCI_AUTOSELECT feat_pci = "P"; @@ -4934,14 +4960,11 @@ static void b43_print_driverinfo(void) #ifdef CONFIG_B43_LEDS feat_leds = "L"; #endif -#ifdef CONFIG_B43_RFKILL - feat_rfkill = "R"; -#endif printk(KERN_INFO "Broadcom 43xx driver loaded " - "[ Features: %s%s%s%s%s, Firmware-ID: " + "[ Features: %s%s%s%s, Firmware-ID: " B43_SUPPORTED_FIRMWARE_ID " ]\n", feat_pci, feat_pcmcia, feat_nphy, - feat_leds, feat_rfkill); + feat_leds); } static int __init b43_init(void) diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index 40abcf5d1b4..950fb1b0546 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -39,7 +39,6 @@ #define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes)) -extern int b43_modparam_qos; extern int b43_modparam_verbose; /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index f4c2d79cbc8..44cc918e4fc 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -1,7 +1,7 @@ #ifndef LINUX_B43_PHY_COMMON_H_ #define LINUX_B43_PHY_COMMON_H_ -#include <linux/rfkill.h> +#include <linux/types.h> struct b43_wldev; diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 8cd9776752e..69138e8c1db 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev, { struct b43_pio_txqueue *q; - if (b43_modparam_qos) { + if (dev->qos_enabled) { /* 0 = highest priority */ switch (queue_prio) { default: diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 96047843cd5..31e55999893 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -22,15 +22,11 @@ */ -#include "rfkill.h" #include "b43.h" -#include "phy_common.h" - -#include <linux/kmod.h> /* Returns TRUE, if the radio is enabled in hardware. */ -static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) +bool b43_is_hw_radio_enabled(struct b43_wldev *dev) { if (dev->phy.rev >= 3) { if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI) @@ -45,110 +41,39 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) } /* The poll callback for the hardware button. */ -static void b43_rfkill_poll(struct rfkill *rfkill, void *data) +void b43_rfkill_poll(struct ieee80211_hw *hw) { - struct b43_wldev *dev = data; - struct b43_wl *wl = dev->wl; + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev = wl->current_dev; + struct ssb_bus *bus = dev->dev->bus; bool enabled; + bool brought_up = false; mutex_lock(&wl->mutex); if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { - mutex_unlock(&wl->mutex); - return; + if (ssb_bus_powerup(bus, 0)) { + mutex_unlock(&wl->mutex); + return; + } + ssb_device_enable(dev->dev, 0); + brought_up = true; } + enabled = b43_is_hw_radio_enabled(dev); + if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); - enabled = !rfkill_set_hw_state(rfkill, !enabled); + wiphy_rfkill_set_hw_state(hw->wiphy, !enabled); if (enabled != dev->phy.radio_on) b43_software_rfkill(dev, !enabled); } - mutex_unlock(&wl->mutex); -} - -/* Called when the RFKILL toggled in software. */ -static int b43_rfkill_soft_set(void *data, bool blocked) -{ - struct b43_wldev *dev = data; - struct b43_wl *wl = dev->wl; - int err = -EINVAL; - - if (WARN_ON(!wl->rfkill.registered)) - return -EINVAL; - mutex_lock(&wl->mutex); - - if (b43_status(dev) < B43_STAT_INITIALIZED) - goto out_unlock; - - if (!dev->radio_hw_enable) - goto out_unlock; + if (brought_up) { + ssb_device_disable(dev->dev, 0); + ssb_bus_may_powerdown(bus); + } - if (!blocked != dev->phy.radio_on) - b43_software_rfkill(dev, blocked); - err = 0; -out_unlock: mutex_unlock(&wl->mutex); - return err; -} - -const char *b43_rfkill_led_name(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!rfk->registered) - return NULL; - return rfkill_get_led_trigger_name(rfk->rfkill); -} - -static const struct rfkill_ops b43_rfkill_ops = { - .set_block = b43_rfkill_soft_set, - .poll = b43_rfkill_poll, -}; - -void b43_rfkill_init(struct b43_wldev *dev) -{ - struct b43_wl *wl = dev->wl; - struct b43_rfkill *rfk = &(wl->rfkill); - int err; - - rfk->registered = 0; - - snprintf(rfk->name, sizeof(rfk->name), - "b43-%s", wiphy_name(wl->hw->wiphy)); - - rfk->rfkill = rfkill_alloc(rfk->name, - dev->dev->dev, - RFKILL_TYPE_WLAN, - &b43_rfkill_ops, dev); - if (!rfk->rfkill) - goto out_error; - - err = rfkill_register(rfk->rfkill); - if (err) - goto err_free; - - rfk->registered = 1; - - return; - err_free: - rfkill_destroy(rfk->rfkill); - out_error: - rfk->registered = 0; - b43warn(wl, "RF-kill button init failed\n"); -} - -void b43_rfkill_exit(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!rfk->registered) - return; - rfk->registered = 0; - - rfkill_unregister(rfk->rfkill); - rfkill_destroy(rfk->rfkill); - rfk->rfkill = NULL; } diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h index da497e01bbb..f046c3ca051 100644 --- a/drivers/net/wireless/b43/rfkill.h +++ b/drivers/net/wireless/b43/rfkill.h @@ -1,49 +1,11 @@ #ifndef B43_RFKILL_H_ #define B43_RFKILL_H_ +struct ieee80211_hw; struct b43_wldev; +void b43_rfkill_poll(struct ieee80211_hw *hw); -#ifdef CONFIG_B43_RFKILL - -#include <linux/rfkill.h> - - -struct b43_rfkill { - /* The RFKILL subsystem data structure */ - struct rfkill *rfkill; - /* Did initialization succeed? Used for freeing. */ - bool registered; - /* The unique name of this rfkill switch */ - char name[sizeof("b43-phy4294967295")]; -}; - -/* The init function returns void, because we are not interested - * in failing the b43 init process when rfkill init failed. */ -void b43_rfkill_init(struct b43_wldev *dev); -void b43_rfkill_exit(struct b43_wldev *dev); - -const char *b43_rfkill_led_name(struct b43_wldev *dev); - - -#else /* CONFIG_B43_RFKILL */ -/* No RFKILL support. */ - -struct b43_rfkill { - /* empty */ -}; - -static inline void b43_rfkill_init(struct b43_wldev *dev) -{ -} -static inline void b43_rfkill_exit(struct b43_wldev *dev) -{ -} -static inline char * b43_rfkill_led_name(struct b43_wldev *dev) -{ - return NULL; -} - -#endif /* CONFIG_B43_RFKILL */ +bool b43_is_hw_radio_enabled(struct b43_wldev *dev); #endif /* B43_RFKILL_H_ */ diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index a63d88841df..55f36a7254d 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -118,7 +118,6 @@ u8 b43_plcp_get_ratecode_ofdm(const u8 bitrate) void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, const u16 octets, const u8 bitrate) { - __le32 *data = &(plcp->data); __u8 *raw = plcp->raw; if (b43_is_ofdm_rate(bitrate)) { @@ -127,7 +126,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, d = b43_plcp_get_ratecode_ofdm(bitrate); B43_WARN_ON(octets & 0xF000); d |= (octets << 5); - *data = cpu_to_le32(d); + plcp->data = cpu_to_le32(d); } else { u32 plen; @@ -141,7 +140,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, raw[1] = 0x04; } else raw[1] = 0x04; - *data |= cpu_to_le32(plen << 16); + plcp->data |= cpu_to_le32(plen << 16); raw[0] = b43_plcp_get_ratecode_cck(bitrate); } } |