diff options
Diffstat (limited to 'drivers/net/wireless/bcm43xx/bcm43xx.h')
| -rw-r--r-- | drivers/net/wireless/bcm43xx/bcm43xx.h | 997 |
1 files changed, 0 insertions, 997 deletions
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h deleted file mode 100644 index 2ebd2edf586..00000000000 --- a/drivers/net/wireless/bcm43xx/bcm43xx.h +++ /dev/null @@ -1,997 +0,0 @@ -#ifndef BCM43xx_H_ -#define BCM43xx_H_ - -#include <linux/hw_random.h> -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/stringify.h> -#include <linux/pci.h> -#include <net/ieee80211.h> -#include <net/ieee80211softmac.h> -#include <asm/atomic.h> -#include <asm/io.h> - - -#include "bcm43xx_debugfs.h" -#include "bcm43xx_leds.h" - - -#define PFX KBUILD_MODNAME ": " - -#define BCM43xx_SWITCH_CORE_MAX_RETRIES 50 -#define BCM43xx_IRQWAIT_MAX_RETRIES 100 - -#define BCM43xx_IO_SIZE 8192 - -/* Active Core PCI Configuration Register. */ -#define BCM43xx_PCICFG_ACTIVE_CORE 0x80 -/* SPROM control register. */ -#define BCM43xx_PCICFG_SPROMCTL 0x88 -/* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */ -#define BCM43xx_PCICFG_ICR 0x94 - -/* MMIO offsets */ -#define BCM43xx_MMIO_DMA0_REASON 0x20 -#define BCM43xx_MMIO_DMA0_IRQ_MASK 0x24 -#define BCM43xx_MMIO_DMA1_REASON 0x28 -#define BCM43xx_MMIO_DMA1_IRQ_MASK 0x2C -#define BCM43xx_MMIO_DMA2_REASON 0x30 -#define BCM43xx_MMIO_DMA2_IRQ_MASK 0x34 -#define BCM43xx_MMIO_DMA3_REASON 0x38 -#define BCM43xx_MMIO_DMA3_IRQ_MASK 0x3C -#define BCM43xx_MMIO_DMA4_REASON 0x40 -#define BCM43xx_MMIO_DMA4_IRQ_MASK 0x44 -#define BCM43xx_MMIO_DMA5_REASON 0x48 -#define BCM43xx_MMIO_DMA5_IRQ_MASK 0x4C -#define BCM43xx_MMIO_STATUS_BITFIELD 0x120 -#define BCM43xx_MMIO_STATUS2_BITFIELD 0x124 -#define BCM43xx_MMIO_GEN_IRQ_REASON 0x128 -#define BCM43xx_MMIO_GEN_IRQ_MASK 0x12C -#define BCM43xx_MMIO_RAM_CONTROL 0x130 -#define BCM43xx_MMIO_RAM_DATA 0x134 -#define BCM43xx_MMIO_PS_STATUS 0x140 -#define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158 -#define BCM43xx_MMIO_SHM_CONTROL 0x160 -#define BCM43xx_MMIO_SHM_DATA 0x164 -#define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166 -#define BCM43xx_MMIO_XMITSTAT_0 0x170 -#define BCM43xx_MMIO_XMITSTAT_1 0x174 -#define BCM43xx_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ -#define BCM43xx_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ - -/* 32-bit DMA */ -#define BCM43xx_MMIO_DMA32_BASE0 0x200 -#define BCM43xx_MMIO_DMA32_BASE1 0x220 -#define BCM43xx_MMIO_DMA32_BASE2 0x240 -#define BCM43xx_MMIO_DMA32_BASE3 0x260 -#define BCM43xx_MMIO_DMA32_BASE4 0x280 -#define BCM43xx_MMIO_DMA32_BASE5 0x2A0 -/* 64-bit DMA */ -#define BCM43xx_MMIO_DMA64_BASE0 0x200 -#define BCM43xx_MMIO_DMA64_BASE1 0x240 -#define BCM43xx_MMIO_DMA64_BASE2 0x280 -#define BCM43xx_MMIO_DMA64_BASE3 0x2C0 -#define BCM43xx_MMIO_DMA64_BASE4 0x300 -#define BCM43xx_MMIO_DMA64_BASE5 0x340 -/* PIO */ -#define BCM43xx_MMIO_PIO1_BASE 0x300 -#define BCM43xx_MMIO_PIO2_BASE 0x310 -#define BCM43xx_MMIO_PIO3_BASE 0x320 -#define BCM43xx_MMIO_PIO4_BASE 0x330 - -#define BCM43xx_MMIO_PHY_VER 0x3E0 -#define BCM43xx_MMIO_PHY_RADIO 0x3E2 -#define BCM43xx_MMIO_ANTENNA 0x3E8 -#define BCM43xx_MMIO_CHANNEL 0x3F0 -#define BCM43xx_MMIO_CHANNEL_EXT 0x3F4 -#define BCM43xx_MMIO_RADIO_CONTROL 0x3F6 -#define BCM43xx_MMIO_RADIO_DATA_HIGH 0x3F8 -#define BCM43xx_MMIO_RADIO_DATA_LOW 0x3FA -#define BCM43xx_MMIO_PHY_CONTROL 0x3FC -#define BCM43xx_MMIO_PHY_DATA 0x3FE -#define BCM43xx_MMIO_MACFILTER_CONTROL 0x420 -#define BCM43xx_MMIO_MACFILTER_DATA 0x422 -#define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A -#define BCM43xx_MMIO_GPIO_CONTROL 0x49C -#define BCM43xx_MMIO_GPIO_MASK 0x49E -#define BCM43xx_MMIO_TSF_0 0x632 /* core rev < 3 only */ -#define BCM43xx_MMIO_TSF_1 0x634 /* core rev < 3 only */ -#define BCM43xx_MMIO_TSF_2 0x636 /* core rev < 3 only */ -#define BCM43xx_MMIO_TSF_3 0x638 /* core rev < 3 only */ -#define BCM43xx_MMIO_RNG 0x65A -#define BCM43xx_MMIO_POWERUP_DELAY 0x6A8 - -/* SPROM offsets. */ -#define BCM43xx_SPROM_BASE 0x1000 -#define BCM43xx_SPROM_BOARDFLAGS2 0x1c -#define BCM43xx_SPROM_IL0MACADDR 0x24 -#define BCM43xx_SPROM_ET0MACADDR 0x27 -#define BCM43xx_SPROM_ET1MACADDR 0x2a -#define BCM43xx_SPROM_ETHPHY 0x2d -#define BCM43xx_SPROM_BOARDREV 0x2e -#define BCM43xx_SPROM_PA0B0 0x2f -#define BCM43xx_SPROM_PA0B1 0x30 -#define BCM43xx_SPROM_PA0B2 0x31 -#define BCM43xx_SPROM_WL0GPIO0 0x32 -#define BCM43xx_SPROM_WL0GPIO2 0x33 -#define BCM43xx_SPROM_MAXPWR 0x34 -#define BCM43xx_SPROM_PA1B0 0x35 -#define BCM43xx_SPROM_PA1B1 0x36 -#define BCM43xx_SPROM_PA1B2 0x37 -#define BCM43xx_SPROM_IDL_TSSI_TGT 0x38 -#define BCM43xx_SPROM_BOARDFLAGS 0x39 -#define BCM43xx_SPROM_ANTENNA_GAIN 0x3a -#define BCM43xx_SPROM_VERSION 0x3f - -/* BCM43xx_SPROM_BOARDFLAGS values */ -#define BCM43xx_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ -#define BCM43xx_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ -#define BCM43xx_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ -#define BCM43xx_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ -#define BCM43xx_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ -#define BCM43xx_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ -#define BCM43xx_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ -#define BCM43xx_BFL_ENETADM 0x0080 /* has ADMtek switch */ -#define BCM43xx_BFL_ENETVLAN 0x0100 /* can do vlan */ -#define BCM43xx_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ -#define BCM43xx_BFL_NOPCI 0x0400 /* leaves PCI floating */ -#define BCM43xx_BFL_FEM 0x0800 /* supports the Front End Module */ -#define BCM43xx_BFL_EXTLNA 0x1000 /* has an external LNA */ -#define BCM43xx_BFL_HGPA 0x2000 /* had high gain PA */ -#define BCM43xx_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ -#define BCM43xx_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ - -/* GPIO register offset, in both ChipCommon and PCI core. */ -#define BCM43xx_GPIO_CONTROL 0x6c - -/* SHM Routing */ -#define BCM43xx_SHM_SHARED 0x0001 -#define BCM43xx_SHM_WIRELESS 0x0002 -#define BCM43xx_SHM_PCM 0x0003 -#define BCM43xx_SHM_HWMAC 0x0004 -#define BCM43xx_SHM_UCODE 0x0300 - -/* MacFilter offsets. */ -#define BCM43xx_MACFILTER_SELF 0x0000 -#define BCM43xx_MACFILTER_ASSOC 0x0003 - -/* Chipcommon registers. */ -#define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04 -#define BCM43xx_CHIPCOMMON_CTL 0x28 -#define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0 -#define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4 -#define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8 -#define BCM43xx_CHIPCOMMON_SYSCLKCTL 0xC0 - -/* PCI core specific registers. */ -#define BCM43xx_PCICORE_BCAST_ADDR 0x50 -#define BCM43xx_PCICORE_BCAST_DATA 0x54 -#define BCM43xx_PCICORE_SBTOPCI2 0x108 - -/* SBTOPCI2 values. */ -#define BCM43xx_SBTOPCI2_PREFETCH 0x4 -#define BCM43xx_SBTOPCI2_BURST 0x8 -#define BCM43xx_SBTOPCI2_MEMREAD_MULTI 0x20 - -/* PCI-E core registers. */ -#define BCM43xx_PCIECORE_REG_ADDR 0x0130 -#define BCM43xx_PCIECORE_REG_DATA 0x0134 -#define BCM43xx_PCIECORE_MDIO_CTL 0x0128 -#define BCM43xx_PCIECORE_MDIO_DATA 0x012C - -/* PCI-E registers. */ -#define BCM43xx_PCIE_TLP_WORKAROUND 0x0004 -#define BCM43xx_PCIE_DLLP_LINKCTL 0x0100 - -/* PCI-E MDIO bits. */ -#define BCM43xx_PCIE_MDIO_ST 0x40000000 -#define BCM43xx_PCIE_MDIO_WT 0x10000000 -#define BCM43xx_PCIE_MDIO_DEV 22 -#define BCM43xx_PCIE_MDIO_REG 18 -#define BCM43xx_PCIE_MDIO_TA 0x00020000 -#define BCM43xx_PCIE_MDIO_TC 0x0100 - -/* MDIO devices. */ -#define BCM43xx_MDIO_SERDES_RX 0x1F - -/* SERDES RX registers. */ -#define BCM43xx_SERDES_RXTIMER 0x2 -#define BCM43xx_SERDES_CDR 0x6 -#define BCM43xx_SERDES_CDR_BW 0x7 - -/* Chipcommon capabilities. */ -#define BCM43xx_CAPABILITIES_PCTL 0x00040000 -#define BCM43xx_CAPABILITIES_PLLMASK 0x00030000 -#define BCM43xx_CAPABILITIES_PLLSHIFT 16 -#define BCM43xx_CAPABILITIES_FLASHMASK 0x00000700 -#define BCM43xx_CAPABILITIES_FLASHSHIFT 8 -#define BCM43xx_CAPABILITIES_EXTBUSPRESENT 0x00000040 -#define BCM43xx_CAPABILITIES_UARTGPIO 0x00000020 -#define BCM43xx_CAPABILITIES_UARTCLOCKMASK 0x00000018 -#define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT 3 -#define BCM43xx_CAPABILITIES_MIPSBIGENDIAN 0x00000004 -#define BCM43xx_CAPABILITIES_NRUARTSMASK 0x00000003 - -/* PowerControl */ -#define BCM43xx_PCTL_IN 0xB0 -#define BCM43xx_PCTL_OUT 0xB4 -#define BCM43xx_PCTL_OUTENABLE 0xB8 -#define BCM43xx_PCTL_XTAL_POWERUP 0x40 -#define BCM43xx_PCTL_PLL_POWERDOWN 0x80 - -/* PowerControl Clock Modes */ -#define BCM43xx_PCTL_CLK_FAST 0x00 -#define BCM43xx_PCTL_CLK_SLOW 0x01 -#define BCM43xx_PCTL_CLK_DYNAMIC 0x02 - -#define BCM43xx_PCTL_FORCE_SLOW 0x0800 -#define BCM43xx_PCTL_FORCE_PLL 0x1000 -#define BCM43xx_PCTL_DYN_XTAL 0x2000 - -/* COREIDs */ -#define BCM43xx_COREID_CHIPCOMMON 0x800 -#define BCM43xx_COREID_ILINE20 0x801 -#define BCM43xx_COREID_SDRAM 0x803 -#define BCM43xx_COREID_PCI 0x804 -#define BCM43xx_COREID_MIPS 0x805 -#define BCM43xx_COREID_ETHERNET 0x806 -#define BCM43xx_COREID_V90 0x807 -#define BCM43xx_COREID_USB11_HOSTDEV 0x80a -#define BCM43xx_COREID_IPSEC 0x80b -#define BCM43xx_COREID_PCMCIA 0x80d -#define BCM43xx_COREID_EXT_IF 0x80f -#define BCM43xx_COREID_80211 0x812 -#define BCM43xx_COREID_MIPS_3302 0x816 -#define BCM43xx_COREID_USB11_HOST 0x817 -#define BCM43xx_COREID_USB11_DEV 0x818 -#define BCM43xx_COREID_USB20_HOST 0x819 -#define BCM43xx_COREID_USB20_DEV 0x81a -#define BCM43xx_COREID_SDIO_HOST 0x81b -#define BCM43xx_COREID_PCIE 0x820 - -/* Core Information Registers */ -#define BCM43xx_CIR_BASE 0xf00 -#define BCM43xx_CIR_SBTPSFLAG (BCM43xx_CIR_BASE + 0x18) -#define BCM43xx_CIR_SBIMSTATE (BCM43xx_CIR_BASE + 0x90) -#define BCM43xx_CIR_SBINTVEC (BCM43xx_CIR_BASE + 0x94) -#define BCM43xx_CIR_SBTMSTATELOW (BCM43xx_CIR_BASE + 0x98) -#define BCM43xx_CIR_SBTMSTATEHIGH (BCM43xx_CIR_BASE + 0x9c) -#define BCM43xx_CIR_SBIMCONFIGLOW (BCM43xx_CIR_BASE + 0xa8) -#define BCM43xx_CIR_SB_ID_HI (BCM43xx_CIR_BASE + 0xfc) - -/* Mask to get the Backplane Flag Number from SBTPSFLAG. */ -#define BCM43xx_BACKPLANE_FLAG_NR_MASK 0x3f - -/* SBIMCONFIGLOW values/masks. */ -#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK 0x00000007 -#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT 0 -#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK 0x00000070 -#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT 4 -#define BCM43xx_SBIMCONFIGLOW_CONNID_MASK 0x00ff0000 -#define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT 16 - -/* sbtmstatelow state flags */ -#define BCM43xx_SBTMSTATELOW_RESET 0x01 -#define BCM43xx_SBTMSTATELOW_REJECT 0x02 -#define BCM43xx_SBTMSTATELOW_CLOCK 0x10000 -#define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK 0x20000 -#define BCM43xx_SBTMSTATELOW_G_MODE_ENABLE 0x20000000 - -/* sbtmstatehigh state flags */ -#define BCM43xx_SBTMSTATEHIGH_SERROR 0x00000001 -#define BCM43xx_SBTMSTATEHIGH_BUSY 0x00000004 -#define BCM43xx_SBTMSTATEHIGH_TIMEOUT 0x00000020 -#define BCM43xx_SBTMSTATEHIGH_G_PHY_AVAIL 0x00010000 -#define BCM43xx_SBTMSTATEHIGH_A_PHY_AVAIL 0x00020000 -#define BCM43xx_SBTMSTATEHIGH_COREFLAGS 0x1FFF0000 -#define BCM43xx_SBTMSTATEHIGH_DMA64BIT 0x10000000 -#define BCM43xx_SBTMSTATEHIGH_GATEDCLK 0x20000000 -#define BCM43xx_SBTMSTATEHIGH_BISTFAILED 0x40000000 -#define BCM43xx_SBTMSTATEHIGH_BISTCOMPLETE 0x80000000 - -/* sbimstate flags */ -#define BCM43xx_SBIMSTATE_IB_ERROR 0x20000 -#define BCM43xx_SBIMSTATE_TIMEOUT 0x40000 - -/* PHYVersioning */ -#define BCM43xx_PHYTYPE_A 0x00 -#define BCM43xx_PHYTYPE_B 0x01 -#define BCM43xx_PHYTYPE_G 0x02 - -/* PHYRegisters */ -#define BCM43xx_PHY_ILT_A_CTRL 0x0072 -#define BCM43xx_PHY_ILT_A_DATA1 0x0073 -#define BCM43xx_PHY_ILT_A_DATA2 0x0074 -#define BCM43xx_PHY_G_LO_CONTROL 0x0810 -#define BCM43xx_PHY_ILT_G_CTRL 0x0472 -#define BCM43xx_PHY_ILT_G_DATA1 0x0473 -#define BCM43xx_PHY_ILT_G_DATA2 0x0474 -#define BCM43xx_PHY_A_PCTL 0x007B -#define BCM43xx_PHY_G_PCTL 0x0029 -#define BCM43xx_PHY_A_CRS 0x0029 -#define BCM43xx_PHY_RADIO_BITFIELD 0x0401 -#define BCM43xx_PHY_G_CRS 0x0429 -#define BCM43xx_PHY_NRSSILT_CTRL 0x0803 -#define BCM43xx_PHY_NRSSILT_DATA 0x0804 - -/* RadioRegisters */ -#define BCM43xx_RADIOCTL_ID 0x01 - -/* StatusBitField */ -#define BCM43xx_SBF_MAC_ENABLED 0x00000001 -#define BCM43xx_SBF_2 0x00000002 /*FIXME: fix name*/ -#define BCM43xx_SBF_CORE_READY 0x00000004 -#define BCM43xx_SBF_400 0x00000400 /*FIXME: fix name*/ -#define BCM43xx_SBF_4000 0x00004000 /*FIXME: fix name*/ -#define BCM43xx_SBF_8000 0x00008000 /*FIXME: fix name*/ -#define BCM43xx_SBF_XFER_REG_BYTESWAP 0x00010000 -#define BCM43xx_SBF_MODE_NOTADHOC 0x00020000 -#define BCM43xx_SBF_MODE_AP 0x00040000 -#define BCM43xx_SBF_RADIOREG_LOCK 0x00080000 -#define BCM43xx_SBF_MODE_MONITOR 0x00400000 -#define BCM43xx_SBF_MODE_PROMISC 0x01000000 -#define BCM43xx_SBF_PS1 0x02000000 -#define BCM43xx_SBF_PS2 0x04000000 -#define BCM43xx_SBF_NO_SSID_BCAST 0x08000000 -#define BCM43xx_SBF_TIME_UPDATE 0x10000000 -#define BCM43xx_SBF_MODE_G 0x80000000 - -/* Microcode */ -#define BCM43xx_UCODE_REVISION 0x0000 -#define BCM43xx_UCODE_PATCHLEVEL 0x0002 -#define BCM43xx_UCODE_DATE 0x0004 -#define BCM43xx_UCODE_TIME 0x0006 -#define BCM43xx_UCODE_STATUS 0x0040 - -/* MicrocodeFlagsBitfield (addr + lo-word values?)*/ -#define BCM43xx_UCODEFLAGS_OFFSET 0x005E - -#define BCM43xx_UCODEFLAG_AUTODIV 0x0001 -#define BCM43xx_UCODEFLAG_UNKBGPHY 0x0002 -#define BCM43xx_UCODEFLAG_UNKBPHY 0x0004 -#define BCM43xx_UCODEFLAG_UNKGPHY 0x0020 -#define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040 -#define BCM43xx_UCODEFLAG_JAPAN 0x0080 - -/* Hardware Radio Enable masks */ -#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) -#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) - -/* Generic-Interrupt reasons. */ -#define BCM43xx_IRQ_READY (1 << 0) -#define BCM43xx_IRQ_BEACON (1 << 1) -#define BCM43xx_IRQ_PS (1 << 2) -#define BCM43xx_IRQ_REG124 (1 << 5) -#define BCM43xx_IRQ_PMQ (1 << 6) -#define BCM43xx_IRQ_PIO_WORKAROUND (1 << 8) -#define BCM43xx_IRQ_XMIT_ERROR (1 << 11) -#define BCM43xx_IRQ_RX (1 << 15) -#define BCM43xx_IRQ_SCAN (1 << 16) -#define BCM43xx_IRQ_NOISE (1 << 18) -#define BCM43xx_IRQ_XMIT_STATUS (1 << 29) - -#define BCM43xx_IRQ_ALL 0xffffffff -#define BCM43xx_IRQ_INITIAL (BCM43xx_IRQ_PS | \ - BCM43xx_IRQ_REG124 | \ - BCM43xx_IRQ_PMQ | \ - BCM43xx_IRQ_XMIT_ERROR | \ - BCM43xx_IRQ_RX | \ - BCM43xx_IRQ_SCAN | \ - BCM43xx_IRQ_NOISE | \ - BCM43xx_IRQ_XMIT_STATUS) - - -/* Initial default iw_mode */ -#define BCM43xx_INITIAL_IWMODE IW_MODE_INFRA - -/* Bus type PCI. */ -#define BCM43xx_BUSTYPE_PCI 0 -/* Bus type Silicone Backplane Bus. */ -#define BCM43xx_BUSTYPE_SB 1 -/* Bus type PCMCIA. */ -#define BCM43xx_BUSTYPE_PCMCIA 2 - -/* Threshold values. */ -#define BCM43xx_MIN_RTS_THRESHOLD 1U -#define BCM43xx_MAX_RTS_THRESHOLD 2304U -#define BCM43xx_DEFAULT_RTS_THRESHOLD BCM43xx_MAX_RTS_THRESHOLD - -#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7 -#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4 - -/* FIXME: the next line is a guess as to what the maximum RSSI value might be */ -#define RX_RSSI_MAX 60 - -/* Max size of a security key */ -#define BCM43xx_SEC_KEYSIZE 16 -/* Security algorithms. */ -enum { - BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ - BCM43xx_SEC_ALGO_WEP, - BCM43xx_SEC_ALGO_UNKNOWN, - BCM43xx_SEC_ALGO_AES, - BCM43xx_SEC_ALGO_WEP104, - BCM43xx_SEC_ALGO_TKIP, -}; - -#ifdef assert -# undef assert -#endif -#ifdef CONFIG_BCM43XX_DEBUG -#define assert(expr) \ - do { \ - if (unlikely(!(expr))) { \ - printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n", \ - #expr, __FILE__, __LINE__, __FUNCTION__); \ - } \ - } while (0) -#else -#define assert(expr) do { /* nothing */ } while (0) -#endif - -/* rate limited printk(). */ -#ifdef printkl -# undef printkl -#endif -#define printkl(f, x...) do { if (printk_ratelimit()) printk(f ,##x); } while (0) -/* rate limited printk() for debugging */ -#ifdef dprintkl -# undef dprintkl -#endif -#ifdef CONFIG_BCM43XX_DEBUG -# define dprintkl printkl -#else -# define dprintkl(f, x...) do { /* nothing */ } while (0) -#endif - -/* Helper macro for if branches. - * An if branch marked with this macro is only taken in DEBUG mode. - * Example: - * if (DEBUG_ONLY(foo == bar)) { - * do something - * } - * In DEBUG mode, the branch will be taken if (foo == bar). - * In non-DEBUG mode, the branch will never be taken. - */ -#ifdef DEBUG_ONLY -# undef DEBUG_ONLY -#endif -#ifdef CONFIG_BCM43XX_DEBUG -# define DEBUG_ONLY(x) (x) -#else -# define DEBUG_ONLY(x) 0 -#endif - -/* debugging printk() */ -#ifdef dprintk -# undef dprintk -#endif -#ifdef CONFIG_BCM43XX_DEBUG -# define dprintk(f, x...) do { printk(f ,##x); } while (0) -#else -# define dprintk(f, x...) do { /* nothing */ } while (0) -#endif - - -struct net_device; -struct pci_dev; -struct bcm43xx_dmaring; -struct bcm43xx_pioqueue; - -struct bcm43xx_initval { - __be16 offset; - __be16 size; - __be32 value; -} __attribute__((__packed__)); - -/* Values for bcm430x_sprominfo.locale */ -enum { - BCM43xx_LOCALE_WORLD = 0, - BCM43xx_LOCALE_THAILAND, - BCM43xx_LOCALE_ISRAEL, - BCM43xx_LOCALE_JORDAN, - BCM43xx_LOCALE_CHINA, - BCM43xx_LOCALE_JAPAN, - BCM43xx_LOCALE_USA_CANADA_ANZ, - BCM43xx_LOCALE_EUROPE, - BCM43xx_LOCALE_USA_LOW, - BCM43xx_LOCALE_JAPAN_HIGH, - BCM43xx_LOCALE_ALL, - BCM43xx_LOCALE_NONE, -}; - -#define BCM43xx_SPROM_SIZE 64 /* in 16-bit words. */ -struct bcm43xx_sprominfo { - u16 boardflags2; - u8 il0macaddr[6]; - u8 et0macaddr[6]; - u8 et1macaddr[6]; - u8 et0phyaddr:5; - u8 et1phyaddr:5; - u8 boardrev; - u8 locale:4; - u8 antennas_aphy:2; - u8 antennas_bgphy:2; - u16 pa0b0; - u16 pa0b1; - u16 pa0b2; - u8 wl0gpio0; - u8 wl0gpio1; - u8 wl0gpio2; - u8 wl0gpio3; - u8 maxpower_aphy; - u8 maxpower_bgphy; - u16 pa1b0; - u16 pa1b1; - u16 pa1b2; - u8 idle_tssi_tgt_aphy; - u8 idle_tssi_tgt_bgphy; - u16 boardflags; - u16 antennagain_aphy; - u16 antennagain_bgphy; -}; - -/* Value pair to measure the LocalOscillator. */ -struct bcm43xx_lopair { - s8 low; - s8 high; - u8 used:1; -}; -#define BCM43xx_LO_COUNT (14*4) - -struct bcm43xx_phyinfo { - /* Hardware Data */ - u8 analog; - u8 type; - u8 rev; - u16 antenna_diversity; - u16 savedpctlreg; - u16 minlowsig[2]; - u16 minlowsigpos[2]; - u8 connected:1, - calibrated:1, - is_locked:1, /* used in bcm43xx_phy_{un}lock() */ - dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */ - /* LO Measurement Data. - * Use bcm43xx_get_lopair() to get a value. - */ - struct bcm43xx_lopair *_lo_pairs; - - /* TSSI to dBm table in use */ - const s8 *tssi2dbm; - /* idle TSSI value */ - s8 idle_tssi; - - /* Values from bcm43xx_calc_loopback_gain() */ - u16 loopback_gain[2]; - - /* PHY lock for core.rev < 3 - * This lock is only used by bcm43xx_phy_{un}lock() - */ - spinlock_t lock; - - /* Firmware. */ - const struct firmware *ucode; - const struct firmware *pcm; - const struct firmware *initvals0; - const struct firmware *initvals1; -}; - - -struct bcm43xx_radioinfo { - u16 manufact; - u16 version; - u8 revision; - - /* Desired TX power in dBm Q5.2 */ - u16 txpower_desired; - /* TX Power control values. */ - union { - /* B/G PHY */ - struct { - u16 baseband_atten; - u16 radio_atten; - u16 txctl1; - u16 txctl2; - }; - /* A PHY */ - struct { - u16 txpwr_offset; - }; - }; - - /* Current Interference Mitigation mode */ - int interfmode; - /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: - * bit 0-11: offset - * bit 12-15: register ID - * bit 16-32: value - * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT - */ -#define BCM43xx_INTERFSTACK_SIZE 26 - u32 interfstack[BCM43xx_INTERFSTACK_SIZE]; - - /* Saved values from the NRSSI Slope calculation */ - s16 nrssi[2]; - s32 nrssislope; - /* In memory nrssi lookup table. */ - s8 nrssi_lt[64]; - - /* current channel */ - u8 channel; - u8 initial_channel; - - u16 lofcal; - - u16 initval; - - u8 enabled:1; - /* ACI (adjacent channel interference) flags. */ - u8 aci_enable:1, - aci_wlan_automatic:1, - aci_hw_rssi:1; -}; - -/* Data structures for DMA transmission, per 80211 core. */ -struct bcm43xx_dma { - struct bcm43xx_dmaring *tx_ring0; - struct bcm43xx_dmaring *tx_ring1; - struct bcm43xx_dmaring *tx_ring2; - struct bcm43xx_dmaring *tx_ring3; - struct bcm43xx_dmaring *tx_ring4; - struct bcm43xx_dmaring *tx_ring5; - - struct bcm43xx_dmaring *rx_ring0; - struct bcm43xx_dmaring *rx_ring3; /* only available on core.rev < 5 */ -}; - -/* Data structures for PIO transmission, per 80211 core. */ -struct bcm43xx_pio { - struct bcm43xx_pioqueue *queue0; - struct bcm43xx_pioqueue *queue1; - struct bcm43xx_pioqueue *queue2; - struct bcm43xx_pioqueue *queue3; -}; - -#define BCM43xx_MAX_80211_CORES 2 - -/* Generic information about a core. */ -struct bcm43xx_coreinfo { - u8 available:1, - enabled:1, - initialized:1; - /** core_rev revision number */ - u8 rev; - /** Index number for _switch_core() */ - u8 index; - /** core_id ID number */ - u16 id; - /** Core-specific data. */ - void *priv; -}; - -/* Additional information for each 80211 core. */ -struct bcm43xx_coreinfo_80211 { - /* PHY device. */ - struct bcm43xx_phyinfo phy; - /* Radio device. */ - struct bcm43xx_radioinfo radio; - union { - /* DMA context. */ - struct bcm43xx_dma dma; - /* PIO context. */ - struct bcm43xx_pio pio; - }; -}; - -/* Context information for a noise calculation (Link Quality). */ -struct bcm43xx_noise_calculation { - struct bcm43xx_coreinfo *core_at_start; - u8 channel_at_start; - u8 calculation_running:1; - u8 nr_samples; - s8 samples[8][4]; -}; - -struct bcm43xx_stats { - u8 noise; - struct iw_statistics wstats; - /* Store the last TX/RX times here for updating the leds. */ - unsigned long last_tx; - unsigned long last_rx; -}; - -struct bcm43xx_key { - u8 enabled:1; - u8 algorithm; -}; - -/* Driver initialization status. */ -enum { - BCM43xx_STAT_UNINIT, /* Uninitialized. */ - BCM43xx_STAT_INITIALIZING, /* init_board() in progress. */ - BCM43xx_STAT_INITIALIZED, /* Fully operational. */ - BCM43xx_STAT_SHUTTINGDOWN, /* free_board() in progress. */ - BCM43xx_STAT_RESTARTING, /* controller_restart() called. */ -}; -#define bcm43xx_status(bcm) atomic_read(&(bcm)->init_status) -#define bcm43xx_set_status(bcm, stat) do { \ - atomic_set(&(bcm)->init_status, (stat)); \ - smp_wmb(); \ - } while (0) - -/* *** THEORY OF LOCKING *** - * - * We have two different locks in the bcm43xx driver. - * => bcm->mutex: General sleeping mutex. Protects struct bcm43xx_private - * and the device registers. This mutex does _not_ protect - * against concurrency from the IRQ handler. - * => bcm->irq_lock: IRQ spinlock. Protects against IRQ handler concurrency. - * - * Please note that, if you only take the irq_lock, you are not protected - * against concurrency from the periodic work handlers. - * Most times you want to take _both_ locks. - */ - -struct bcm43xx_private { - struct ieee80211_device *ieee; - struct ieee80211softmac_device *softmac; - - struct net_device *net_dev; - struct pci_dev *pci_dev; - unsigned int irq; - - void __iomem *mmio_addr; - - spinlock_t irq_lock; - struct mutex mutex; - - /* Driver initialization status BCM43xx_STAT_*** */ - atomic_t init_status; - - u16 was_initialized:1, /* for PCI suspend/resume. */ - __using_pio:1, /* Internal, use bcm43xx_using_pio(). */ - bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */ - reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */ - short_preamble:1, /* TRUE, if short preamble is enabled. */ - firmware_norelease:1, /* Do not release the firmware. Used on suspend. */ - radio_hw_enable:1; /* TRUE if radio is hardware enabled */ - - struct bcm43xx_stats stats; - - /* Bus type we are connected to. - * This is currently always BCM43xx_BUSTYPE_PCI - */ - u8 bustype; - u64 dma_mask; - - u16 board_vendor; - u16 board_type; - u16 board_revision; - - u16 chip_id; - u8 chip_rev; - u8 chip_package; - - struct bcm43xx_sprominfo sprom; -#define BCM43xx_NR_LEDS 4 - struct bcm43xx_led leds[BCM43xx_NR_LEDS]; - spinlock_t leds_lock; - - /* The currently active core. */ - struct bcm43xx_coreinfo *current_core; - struct bcm43xx_coreinfo *active_80211_core; - /* coreinfo structs for all possible cores follow. - * Note that a core might not exist. - * So check the coreinfo flags before using it. - */ - struct bcm43xx_coreinfo core_chipcommon; - struct bcm43xx_coreinfo core_pci; - struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ]; - /* Additional information, specific to the 80211 cores. */ - struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ]; - /* Number of available 80211 cores. */ - int nr_80211_available; - - u32 chipcommon_capabilities; - - /* Reason code of the last interrupt. */ - u32 irq_reason; - u32 dma_reason[6]; - /* saved irq enable/disable state bitfield. */ - u32 irq_savedstate; - /* Link Quality calculation context. */ - struct bcm43xx_noise_calculation noisecalc; - /* if > 0 MAC is suspended. if == 0 MAC is enabled. */ - int mac_suspended; - - /* Threshold values. */ - //TODO: The RTS thr has to be _used_. Currently, it is only set via WX. - u32 rts_threshold; - - /* Interrupt Service Routine tasklet (bottom-half) */ - struct tasklet_struct isr_tasklet; - - /* Periodic tasks */ - struct delayed_work periodic_work; - unsigned int periodic_state; - - struct work_struct restart_work; - - /* Informational stuff. */ - char nick[IW_ESSID_MAX_SIZE + 1]; - - /* encryption/decryption */ - u16 security_offset; - struct bcm43xx_key key[54]; - u8 default_key_idx; - - /* Random Number Generator. */ - struct hwrng rng; - char rng_name[20 + 1]; - - /* Debugging stuff follows. */ -#ifdef CONFIG_BCM43XX_DEBUG - struct bcm43xx_dfsentry *dfsentry; -#endif -}; - - -static inline -struct bcm43xx_private * bcm43xx_priv(struct net_device *dev) -{ - return ieee80211softmac_priv(dev); -} - -struct device; - -static inline -struct bcm43xx_private * dev_to_bcm(struct device *dev) -{ - struct net_device *net_dev; - struct bcm43xx_private *bcm; - - net_dev = dev_get_drvdata(dev); - bcm = bcm43xx_priv(net_dev); - - return bcm; -} - - -/* Helper function, which returns a boolean. - * TRUE, if PIO is used; FALSE, if DMA is used. - */ -#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO) -static inline -int bcm43xx_using_pio(struct bcm43xx_private *bcm) -{ - return bcm->__using_pio; -} -#elif defined(CONFIG_BCM43XX_DMA) -static inline -int bcm43xx_using_pio(struct bcm43xx_private *bcm) -{ - return 0; -} -#elif defined(CONFIG_BCM43XX_PIO) -static inline -int bcm43xx_using_pio(struct bcm43xx_private *bcm) -{ - return 1; -} -#else -# error "Using neither DMA nor PIO? Confused..." -#endif - -/* Helper functions to access data structures private to the 80211 cores. - * Note that we _must_ have an 80211 core mapped when calling - * any of these functions. - */ -static inline -struct bcm43xx_coreinfo_80211 * -bcm43xx_current_80211_priv(struct bcm43xx_private *bcm) -{ - assert(bcm->current_core->id == BCM43xx_COREID_80211); - return bcm->current_core->priv; -} -static inline -struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm) -{ - assert(bcm43xx_using_pio(bcm)); - return &(bcm43xx_current_80211_priv(bcm)->pio); -} -static inline -struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm) -{ - assert(!bcm43xx_using_pio(bcm)); - return &(bcm43xx_current_80211_priv(bcm)->dma); -} -static inline -struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm) -{ - return &(bcm43xx_current_80211_priv(bcm)->phy); -} -static inline -struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm) -{ - return &(bcm43xx_current_80211_priv(bcm)->radio); -} - - -static inline -struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy, - u16 radio_attenuation, - u16 baseband_attenuation) -{ - return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2)); -} - - -static inline -u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset) -{ - return ioread16(bcm->mmio_addr + offset); -} - -static inline -void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value) -{ - iowrite16(value, bcm->mmio_addr + offset); -} - -static inline -u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset) -{ - return ioread32(bcm->mmio_addr + offset); -} - -static inline -void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value) -{ - iowrite32(value, bcm->mmio_addr + offset); -} - -static inline -int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value) -{ - return pci_read_config_word(bcm->pci_dev, offset, value); -} - -static inline -int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value) -{ - return pci_read_config_dword(bcm->pci_dev, offset, value); -} - -static inline -int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value) -{ - return pci_write_config_word(bcm->pci_dev, offset, value); -} - -static inline -int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value) -{ - return pci_write_config_dword(bcm->pci_dev, offset, value); -} - -/** Limit a value between two limits */ -#ifdef limit_value -# undef limit_value -#endif -#define limit_value(value, min, max) \ - ({ \ - typeof(value) __value = (value); \ - typeof(value) __min = (min); \ - typeof(value) __max = (max); \ - if (__value < __min) \ - __value = __min; \ - else if (__value > __max) \ - __value = __max; \ - __value; \ - }) - -#endif /* BCM43xx_H_ */ |