1 files changed, 560 insertions, 177 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 3e10b801eee..fa35b23bbaa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -17,16 +17,23 @@
 
 #include <linux/types.h>
 #include <linux/netdevice.h>
-#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/sched.h>
 #include <linux/completion.h>
 #include <linux/scatterlist.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/core.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/brcmfmac-sdio.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <net/cfg80211.h>
 
 #include <defs.h>
 #include <brcm_hw_ids.h>
@@ -36,11 +43,19 @@
 #include "dhd_bus.h"
 #include "dhd_dbg.h"
 #include "sdio_host.h"
+#include "sdio_chip.h"
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
+#define DMA_ALIGN_MASK	0x03
 
-static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
+#define SDIO_FUNC1_BLOCKSIZE		64
+#define SDIO_FUNC2_BLOCKSIZE		512
+/* Maximum milliseconds to wait for F2 to come up */
+#define SDIO_WAIT_F2RDY	3000
+
+
+static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev_id);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -55,27 +70,46 @@ static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 		sdiodev->irq_en = false;
 	}
 
-	brcmf_sdbrcm_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus);
 
 	return IRQ_HANDLED;
 }
 
-static void brcmf_sdio_ib_irqhandler(struct sdio_func *func)
+static void brcmf_sdiod_ib_irqhandler(struct sdio_func *func)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
 	brcmf_dbg(INTR, "IB intr triggered\n");
 
-	brcmf_sdbrcm_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus);
 }
 
 /* dummy handler for SDIO function 2 interrupt */
-static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
+static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
-int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
+static bool brcmf_sdiod_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
+{
+	bool is_err = false;
+#ifdef CONFIG_PM_SLEEP
+	is_err = atomic_read(&sdiodev->suspend);
+#endif
+	return is_err;
+}
+
+static void brcmf_sdiod_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
+				       wait_queue_head_t *wq)
+{
+#ifdef CONFIG_PM_SLEEP
+	int retry = 0;
+	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
+		wait_event_timeout(*wq, false, HZ/100);
+#endif
+}
+
+int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
 	u8 data;
@@ -85,7 +119,7 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 		brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
 			  sdiodev->pdata->oob_irq_nr);
 		ret = request_irq(sdiodev->pdata->oob_irq_nr,
-				  brcmf_sdio_oob_irqhandler,
+				  brcmf_sdiod_oob_irqhandler,
 				  sdiodev->pdata->oob_irq_flags,
 				  "brcmf_oob_intr",
 				  &sdiodev->func[1]->dev);
@@ -109,36 +143,36 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 		sdio_claim_host(sdiodev->func[1]);
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
-		data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+		data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
 		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
 		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
 		if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_SEPINT_ACT_HI;
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 
 		sdio_release_host(sdiodev->func[1]);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
 		sdio_claim_host(sdiodev->func[1]);
-		sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler);
-		sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
+		sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler);
+		sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler);
 		sdio_release_host(sdiodev->func[1]);
 	}
 
 	return 0;
 }
 
-int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(SDIO, "Entering\n");
 
 	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
 		sdio_claim_host(sdiodev->func[1]);
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
 		sdio_release_host(sdiodev->func[1]);
 
 		if (sdiodev->oob_irq_requested) {
@@ -161,29 +195,150 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 	return 0;
 }
 
+static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func,
+					uint regaddr, u8 byte)
+{
+	int err_ret;
+
+	/*
+	 * Can only directly write to some F0 registers.
+	 * Handle CCCR_IENx and CCCR_ABORT command
+	 * as a special case.
+	 */
+	if ((regaddr == SDIO_CCCR_ABORT) ||
+	    (regaddr == SDIO_CCCR_IENx))
+		sdio_writeb(func, byte, regaddr, &err_ret);
+	else
+		sdio_f0_writeb(func, byte, regaddr, &err_ret);
+
+	return err_ret;
+}
+
+static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
+				    u32 addr, u8 regsz, void *data, bool write)
+{
+	struct sdio_func *func;
+	int ret;
+
+	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
+		  write, fn, addr, regsz);
+
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
+		return -EIO;
+
+	/* only allow byte access on F0 */
+	if (WARN_ON(regsz > 1 && !fn))
+		return -EINVAL;
+	func = sdiodev->func[fn];
+
+	switch (regsz) {
+	case sizeof(u8):
+		if (write) {
+			if (fn)
+				sdio_writeb(func, *(u8 *)data, addr, &ret);
+			else
+				ret = brcmf_sdiod_f0_writeb(func, addr,
+							    *(u8 *)data);
+		} else {
+			if (fn)
+				*(u8 *)data = sdio_readb(func, addr, &ret);
+			else
+				*(u8 *)data = sdio_f0_readb(func, addr, &ret);
+		}
+		break;
+	case sizeof(u16):
+		if (write)
+			sdio_writew(func, *(u16 *)data, addr, &ret);
+		else
+			*(u16 *)data = sdio_readw(func, addr, &ret);
+		break;
+	case sizeof(u32):
+		if (write)
+			sdio_writel(func, *(u32 *)data, addr, &ret);
+		else
+			*(u32 *)data = sdio_readl(func, addr, &ret);
+		break;
+	default:
+		brcmf_err("invalid size: %d\n", regsz);
+		break;
+	}
+
+	if (ret) {
+		/*
+		 * SleepCSR register access can fail when
+		 * waking up the device so reduce this noise
+		 * in the logs.
+		 */
+		if (addr != SBSDIO_FUNC1_SLEEPCSR)
+			brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
+				  write ? "write" : "read", fn, addr, ret);
+		else
+			brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
+				  write ? "write" : "read", fn, addr, ret);
+	}
+	return ret;
+}
+
+static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
+				   u8 regsz, void *data, bool write)
+{
+	u8 func_num;
+	s32 retry = 0;
+	int ret;
+
+	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+		return -ENOMEDIUM;
+
+	/*
+	 * figure out how to read the register based on address range
+	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
+	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
+	 * The rest: function 1 silicon backplane core registers
+	 */
+	if ((addr & ~REG_F0_REG_MASK) == 0)
+		func_num = SDIO_FUNC_0;
+	else
+		func_num = SDIO_FUNC_1;
+
+	do {
+		if (!write)
+			memset(data, 0, regsz);
+		/* for retry wait for 1 ms till bus get settled down */
+		if (retry)
+			usleep_range(1000, 2000);
+		ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz,
+					       data, write);
+	} while (ret != 0 && ret != -ENOMEDIUM &&
+		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+
+	if (ret == -ENOMEDIUM)
+		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+	else if (ret != 0)
+		brcmf_err("failed with %d\n", ret);
+
+	return ret;
+}
+
 static int
-brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
+brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 {
 	int err = 0, i;
 	u8 addr[3];
-	s32 retry;
+
+	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+		return -ENOMEDIUM;
 
 	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
 	addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
 	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
 
 	for (i = 0; i < 3; i++) {
-		retry = 0;
-		do {
-			if (retry)
-				usleep_range(1000, 2000);
-			err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE,
-					SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i,
-					&addr[i]);
-		} while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
-
+		err = brcmf_sdiod_regrw_helper(sdiodev,
+					       SBSDIO_FUNC1_SBADDRLOW + i,
+					       sizeof(u8), &addr[i], true);
 		if (err) {
-			brcmf_err("failed at addr:0x%0x\n",
+			brcmf_err("failed at addr: 0x%0x\n",
 				  SBSDIO_FUNC1_SBADDRLOW + i);
 			break;
 		}
@@ -193,13 +348,13 @@ brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 }
 
 static int
-brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
+brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 {
 	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
 
 	if (bar0 != sdiodev->sbwad) {
-		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
+		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
 		if (err)
 			return err;
 
@@ -214,62 +369,14 @@ brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 	return 0;
 }
 
-int
-brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
-			void *data, bool write)
-{
-	u8 func_num, reg_size;
-	s32 retry = 0;
-	int ret;
-
-	/*
-	 * figure out how to read the register based on address range
-	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
-	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
-	 * The rest: function 1 silicon backplane core registers
-	 */
-	if ((addr & ~REG_F0_REG_MASK) == 0) {
-		func_num = SDIO_FUNC_0;
-		reg_size = 1;
-	} else if ((addr & ~REG_F1_MISC_MASK) == 0) {
-		func_num = SDIO_FUNC_1;
-		reg_size = 1;
-	} else {
-		func_num = SDIO_FUNC_1;
-		reg_size = 4;
-
-		ret = brcmf_sdio_addrprep(sdiodev, reg_size, &addr);
-		if (ret)
-			goto done;
-	}
-
-	do {
-		if (!write)
-			memset(data, 0, reg_size);
-		if (retry)	/* wait for 1 ms till bus get settled down */
-			usleep_range(1000, 2000);
-		if (reg_size == 1)
-			ret = brcmf_sdioh_request_byte(sdiodev, write,
-						       func_num, addr, data);
-		else
-			ret = brcmf_sdioh_request_word(sdiodev, write,
-						       func_num, addr, data, 4);
-	} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
-
-done:
-	if (ret != 0)
-		brcmf_err("failed with %d\n", ret);
-
-	return ret;
-}
-
-u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
 	u8 data;
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+					  false);
 	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
 	if (ret)
@@ -278,52 +385,63 @@ u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	return data;
 }
 
-u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
 	u32 data;
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
+	if (retval)
+		goto done;
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+					  false);
 	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
+done:
 	if (ret)
 		*ret = retval;
 
 	return data;
 }
 
-void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
+void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		      u8 data, int *ret)
 {
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
-
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+					  true);
 	if (ret)
 		*ret = retval;
 }
 
-void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
+void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		      u32 data, int *ret)
 {
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
+	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
+	if (retval)
+		goto done;
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
+					  true);
 
+done:
 	if (ret)
 		*ret = retval;
 }
 
-static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
+static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 			     bool write, u32 addr, struct sk_buff *pkt)
 {
 	unsigned int req_sz;
+	int err;
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	/* Single skb use the standard mmc interface */
@@ -331,22 +449,22 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz &= (uint)~3;
 
 	if (write)
-		return sdio_memcpy_toio(sdiodev->func[fn], addr,
-					((u8 *)(pkt->data)),
-					req_sz);
+		err = sdio_memcpy_toio(sdiodev->func[fn], addr,
+				       ((u8 *)(pkt->data)), req_sz);
 	else if (fn == 1)
-		return sdio_memcpy_fromio(sdiodev->func[fn],
-					  ((u8 *)(pkt->data)),
-					  addr, req_sz);
+		err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)),
+					 addr, req_sz);
 	else
 		/* function 2 read is FIFO operation */
-		return sdio_readsb(sdiodev->func[fn],
-				   ((u8 *)(pkt->data)), addr,
-				   req_sz);
+		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
+				  req_sz);
+	if (err == -ENOMEDIUM)
+		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+	return err;
 }
 
 /**
- * brcmf_sdio_sglist_rw - SDIO interface function for block data access
+ * brcmf_sdiod_sglist_rw - SDIO interface function for block data access
  * @sdiodev: brcmfmac sdio device
  * @fn: SDIO function number
  * @write: direction flag
@@ -357,9 +475,9 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
  * stack for block data access. It assumes that the skb passed down by the
  * caller has already been padded and aligned.
  */
-static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
-				bool write, u32 addr,
-				struct sk_buff_head *pktlist)
+static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
+				 bool write, u32 addr,
+				 struct sk_buff_head *pktlist)
 {
 	unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
 	unsigned int max_req_sz, orig_offset, dst_offset;
@@ -377,8 +495,8 @@ static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	if (!pktlist->qlen)
 		return -EINVAL;
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	target_list = pktlist;
@@ -485,7 +603,11 @@ static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
 
 		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
-		if (ret != 0) {
+		if (ret == -ENOMEDIUM) {
+			brcmf_bus_change_state(sdiodev->bus_if,
+					       BRCMF_BUS_NOMEDIUM);
+			break;
+		} else if (ret != 0) {
 			brcmf_err("CMD53 sg block %s failed %d\n",
 				  write ? "write" : "read", ret);
 			ret = -EIO;
@@ -525,9 +647,7 @@ exit:
 	return ret;
 }
 
-int
-brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
 	int err;
@@ -539,7 +659,7 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		return -EIO;
 	}
 
-	err = brcmf_sdcard_recv_pkt(sdiodev, addr, fn, flags, mypkt);
+	err = brcmf_sdiod_recv_pkt(sdiodev, mypkt);
 	if (!err)
 		memcpy(buf, mypkt->data, nbytes);
 
@@ -547,50 +667,47 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	return err;
 }
 
-int
-brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, struct sk_buff *pkt)
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 {
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err = 0;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pkt->len);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		goto done;
 
-	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
+	err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);
 
 done:
 	return err;
 }
 
-int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			    uint flags, struct sk_buff_head *pktq, uint totlen)
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+			   struct sk_buff_head *pktq, uint totlen)
 {
 	struct sk_buff *glom_skb;
 	struct sk_buff *skb;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err = 0;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pktq->qlen);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
+		  addr, pktq->qlen);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		goto done;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq->next);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+					 pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, glom_skb);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+					 glom_skb);
 		if (err)
 			goto done;
 
@@ -599,18 +716,17 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdio_sglist_rw(sdiodev, fn, false, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
+					    pktq);
 
 done:
 	return err;
 }
 
-int
-brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -622,48 +738,47 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 
 	memcpy(mypkt->data, buf, nbytes);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 
 	if (!err)
-		err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, mypkt);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
+					 mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
 
 }
 
-int
-brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, struct sk_buff_head *pktq)
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+			 struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pktq->qlen);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		return err;
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support)
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, skb);
+			err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
+						 addr, skb);
 			if (err)
 				break;
 		}
 	else
-		err = brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
+					    pktq);
 
 	return err;
 }
 
 int
-brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
-		 u8 *data, uint size)
+brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+		  u8 *data, uint size)
 {
 	int bcmerror = 0;
 	struct sk_buff *pkt;
@@ -690,7 +805,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	/* Do the transfer(s) */
 	while (size) {
 		/* Set the backplane window to include the start address */
-		bcmerror = brcmf_sdcard_set_sbaddr_window(sdiodev, address);
+		bcmerror = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
 		if (bcmerror)
 			break;
 
@@ -704,8 +819,8 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
-		bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
-					     sdaddr, pkt);
+		bcmerror = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write,
+					      sdaddr, pkt);
 		if (bcmerror) {
 			brcmf_err("membytes transfer failed\n");
 			break;
@@ -727,7 +842,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	dev_kfree_skb(pkt);
 
 	/* Return the window to backplane enumeration space for core access */
-	if (brcmf_sdcard_set_sbaddr_window(sdiodev, sdiodev->sbwad))
+	if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad))
 		brcmf_err("FAILED to set window back to 0x%x\n",
 			  sdiodev->sbwad);
 
@@ -736,67 +851,335 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	return bcmerror;
 }
 
-int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 {
 	char t_func = (char)fn;
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* issue abort cmd52 command through F0 */
-	brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
-				 SDIO_CCCR_ABORT, &t_func);
+	brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT,
+				 sizeof(t_func), &t_func, true);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
 }
 
-int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
+static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 {
-	u32 regs = 0;
+	if (sdiodev->bus) {
+		brcmf_sdio_remove(sdiodev->bus);
+		sdiodev->bus = NULL;
+	}
+
+	/* Disable Function 2 */
+	sdio_claim_host(sdiodev->func[2]);
+	sdio_disable_func(sdiodev->func[2]);
+	sdio_release_host(sdiodev->func[2]);
+
+	/* Disable Function 1 */
+	sdio_claim_host(sdiodev->func[1]);
+	sdio_disable_func(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+
+	sdiodev->sbwad = 0;
+
+	return 0;
+}
+
+static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
+{
+	struct sdio_func *func;
+	struct mmc_host *host;
+	uint max_blocks;
 	int ret = 0;
 
-	ret = brcmf_sdioh_attach(sdiodev);
-	if (ret)
+	sdiodev->num_funcs = 2;
+
+	sdio_claim_host(sdiodev->func[1]);
+
+	ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
+	if (ret) {
+		brcmf_err("Failed to set F1 blocksize\n");
+		sdio_release_host(sdiodev->func[1]);
+		goto out;
+	}
+	ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
+	if (ret) {
+		brcmf_err("Failed to set F2 blocksize\n");
+		sdio_release_host(sdiodev->func[1]);
+		goto out;
+	}
+
+	/* increase F2 timeout */
+	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;
+
+	/* Enable Function 1 */
+	ret = sdio_enable_func(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+	if (ret) {
+		brcmf_err("Failed to enable F1: err=%d\n", ret);
 		goto out;
+	}
 
-	regs = SI_ENUM_BASE;
+	/*
+	 * determine host related variables after brcmf_sdiod_probe()
+	 * as func->cur_blksize is properly set and F2 init has been
+	 * completed successfully.
+	 */
+	func = sdiodev->func[2];
+	host = func->card->host;
+	sdiodev->sg_support = host->max_segs > 1;
+	max_blocks = min_t(uint, host->max_blk_count, 511u);
+	sdiodev->max_request_size = min_t(uint, host->max_req_size,
+					  max_blocks * func->cur_blksize);
+	sdiodev->max_segment_count = min_t(uint, host->max_segs,
+					   SG_MAX_SINGLE_ALLOC);
+	sdiodev->max_segment_size = host->max_seg_size;
 
 	/* try to attach to the target device */
-	sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
+	sdiodev->bus = brcmf_sdio_probe(sdiodev);
 	if (!sdiodev->bus) {
-		brcmf_err("device attach failed\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
 out:
 	if (ret)
-		brcmf_sdio_remove(sdiodev);
+		brcmf_sdiod_remove(sdiodev);
 
 	return ret;
 }
-EXPORT_SYMBOL(brcmf_sdio_probe);
 
-int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
+/* devices we support, null terminated */
+static const struct sdio_device_id brcmf_sdmmc_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
+		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+	{ /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
+
+static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
+
+
+static int brcmf_ops_sdio_probe(struct sdio_func *func,
+				const struct sdio_device_id *id)
 {
-	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
+	int err;
+	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_bus *bus_if;
 
-	if (sdiodev->bus) {
-		brcmf_sdbrcm_disconnect(sdiodev->bus);
-		sdiodev->bus = NULL;
+	brcmf_dbg(SDIO, "Enter\n");
+	brcmf_dbg(SDIO, "Class=%x\n", func->class);
+	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
+	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
+	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
+
+	/* Consume func num 1 but dont do anything with it. */
+	if (func->num == 1)
+		return 0;
+
+	/* Ignore anything but func 2 */
+	if (func->num != 2)
+		return -ENODEV;
+
+	bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL);
+	if (!bus_if)
+		return -ENOMEM;
+	sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL);
+	if (!sdiodev) {
+		kfree(bus_if);
+		return -ENOMEM;
 	}
 
-	brcmf_sdioh_detach(sdiodev);
+	/* store refs to functions used. mmc_card does
+	 * not hold the F0 function pointer.
+	 */
+	sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL);
+	sdiodev->func[0]->num = 0;
+	sdiodev->func[1] = func->card->sdio_func[0];
+	sdiodev->func[2] = func;
+
+	sdiodev->bus_if = bus_if;
+	bus_if->bus_priv.sdio = sdiodev;
+	bus_if->proto_type = BRCMF_PROTO_BCDC;
+	dev_set_drvdata(&func->dev, bus_if);
+	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
+	sdiodev->dev = &sdiodev->func[1]->dev;
+	sdiodev->pdata = brcmfmac_sdio_pdata;
+
+	atomic_set(&sdiodev->suspend, false);
+	init_waitqueue_head(&sdiodev->request_word_wait);
+	init_waitqueue_head(&sdiodev->request_buffer_wait);
+
+	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n");
+	err = brcmf_sdiod_probe(sdiodev);
+	if (err) {
+		brcmf_err("F2 error, probe failed %d...\n", err);
+		goto fail;
+	}
 
-	sdiodev->sbwad = 0;
+	brcmf_dbg(SDIO, "F2 init completed...\n");
+	return 0;
+
+fail:
+	dev_set_drvdata(&func->dev, NULL);
+	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+	kfree(sdiodev->func[0]);
+	kfree(sdiodev);
+	kfree(bus_if);
+	return err;
+}
+
+static void brcmf_ops_sdio_remove(struct sdio_func *func)
+{
+	struct brcmf_bus *bus_if;
+	struct brcmf_sdio_dev *sdiodev;
+
+	brcmf_dbg(SDIO, "Enter\n");
+	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
+	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
+	brcmf_dbg(SDIO, "Function: %d\n", func->num);
+
+	if (func->num != 1 && func->num != 2)
+		return;
+
+	bus_if = dev_get_drvdata(&func->dev);
+	if (bus_if) {
+		sdiodev = bus_if->bus_priv.sdio;
+		brcmf_sdiod_remove(sdiodev);
+
+		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
+
+		kfree(bus_if);
+		kfree(sdiodev->func[0]);
+		kfree(sdiodev);
+	}
+
+	brcmf_dbg(SDIO, "Exit\n");
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmf_ops_sdio_suspend(struct device *dev)
+{
+	mmc_pm_flag_t sdio_flags;
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	int ret = 0;
+
+	brcmf_dbg(SDIO, "\n");
+
+	atomic_set(&sdiodev->suspend, true);
+
+	sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
+	if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+		brcmf_err("Host can't keep power while suspended\n");
+		return -EINVAL;
+	}
+
+	ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
+	if (ret) {
+		brcmf_err("Failed to set pm_flags\n");
+		return ret;
+	}
+
+	brcmf_sdio_wd_timer(sdiodev->bus, 0);
+
+	return ret;
+}
+
+static int brcmf_ops_sdio_resume(struct device *dev)
+{
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+
+	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
+	atomic_set(&sdiodev->suspend, false);
+	return 0;
+}
+
+static const struct dev_pm_ops brcmf_sdio_pm_ops = {
+	.suspend	= brcmf_ops_sdio_suspend,
+	.resume		= brcmf_ops_sdio_resume,
+};
+#endif	/* CONFIG_PM_SLEEP */
+
+static struct sdio_driver brcmf_sdmmc_driver = {
+	.probe = brcmf_ops_sdio_probe,
+	.remove = brcmf_ops_sdio_remove,
+	.name = BRCMFMAC_SDIO_PDATA_NAME,
+	.id_table = brcmf_sdmmc_ids,
+#ifdef CONFIG_PM_SLEEP
+	.drv = {
+		.pm = &brcmf_sdio_pm_ops,
+	},
+#endif	/* CONFIG_PM_SLEEP */
+};
+
+static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+{
+	brcmf_dbg(SDIO, "Enter\n");
+
+	brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);
+
+	if (brcmfmac_sdio_pdata->power_on)
+		brcmfmac_sdio_pdata->power_on();
 
 	return 0;
 }
-EXPORT_SYMBOL(brcmf_sdio_remove);
 
-void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
+static int brcmf_sdio_pd_remove(struct platform_device *pdev)
 {
-	if (enable)
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
+	brcmf_dbg(SDIO, "Enter\n");
+
+	if (brcmfmac_sdio_pdata->power_off)
+		brcmfmac_sdio_pdata->power_off();
+
+	sdio_unregister_driver(&brcmf_sdmmc_driver);
+
+	return 0;
+}
+
+static struct platform_driver brcmf_sdio_pd = {
+	.remove		= brcmf_sdio_pd_remove,
+	.driver		= {
+		.name	= BRCMFMAC_SDIO_PDATA_NAME,
+		.owner	= THIS_MODULE,
+	}
+};
+
+void brcmf_sdio_register(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&brcmf_sdmmc_driver);
+	if (ret)
+		brcmf_err("sdio_register_driver failed: %d\n", ret);
+}
+
+void brcmf_sdio_exit(void)
+{
+	brcmf_dbg(SDIO, "Enter\n");
+
+	if (brcmfmac_sdio_pdata)
+		platform_driver_unregister(&brcmf_sdio_pd);
 	else
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
+		sdio_unregister_driver(&brcmf_sdmmc_driver);
+}
+
+void __init brcmf_sdio_init(void)
+{
+	int ret;
+
+	brcmf_dbg(SDIO, "Enter\n");
+
+	ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
+	if (ret == -ENODEV)
+		brcmf_dbg(SDIO, "No platform data available.\n");
 }