summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/sdio.c')
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio.c178
1 files changed, 83 insertions, 95 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 0b0d51a6106..faec35c899e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -44,7 +44,8 @@
#include "chip.h"
#include "firmware.h"
-#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
+#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
+#define CTL_DONE_TIMEOUT 2000 /* In milli second */
#ifdef DEBUG
@@ -495,9 +496,9 @@ struct brcmf_sdio {
u8 *ctrl_frame_buf;
u16 ctrl_frame_len;
bool ctrl_frame_stat;
+ int ctrl_frame_err;
spinlock_t txq_lock; /* protect bus->txq */
- struct semaphore tx_seq_lock; /* protect bus->tx_seq */
wait_queue_head_t ctrl_wait;
wait_queue_head_t dcmd_resp_wait;
@@ -514,7 +515,6 @@ struct brcmf_sdio {
bool txoff; /* Transmit flow-controlled */
struct brcmf_sdio_count sdcnt;
bool sr_enabled; /* SaveRestore enabled */
- bool sleeping; /* SDIO bus sleeping */
u8 tx_hdrlen; /* sdio bus header length for tx packet */
bool txglom; /* host tx glomming enable flag */
@@ -608,6 +608,8 @@ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
#define BCM4330_NVRAM_NAME "brcm/brcmfmac4330-sdio.txt"
#define BCM4334_FIRMWARE_NAME "brcm/brcmfmac4334-sdio.bin"
#define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt"
+#define BCM43340_FIRMWARE_NAME "brcm/brcmfmac43340-sdio.bin"
+#define BCM43340_NVRAM_NAME "brcm/brcmfmac43340-sdio.txt"
#define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin"
#define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt"
#define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin"
@@ -629,6 +631,8 @@ MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
MODULE_FIRMWARE(BCM4330_NVRAM_NAME);
MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME);
MODULE_FIRMWARE(BCM4334_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43340_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43340_NVRAM_NAME);
MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME);
MODULE_FIRMWARE(BCM4335_NVRAM_NAME);
MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
@@ -660,6 +664,7 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
+ { BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43340) },
{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
@@ -1008,12 +1013,12 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
(sleep ? "SLEEP" : "WAKE"),
- (bus->sleeping ? "SLEEP" : "WAKE"));
+ (bus->sdiodev->sleeping ? "SLEEP" : "WAKE"));
/* If SR is enabled control bus state with KSO */
if (bus->sr_enabled) {
/* Done if we're already in the requested state */
- if (sleep == bus->sleeping)
+ if (sleep == bus->sdiodev->sleeping)
goto end;
/* Going to sleep */
@@ -1045,12 +1050,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
bus->idlecount = 0;
err = brcmf_sdio_kso_control(bus, true);
}
- if (!err) {
- /* Change state */
- bus->sleeping = sleep;
- brcmf_dbg(SDIO, "new state %s\n",
- (sleep ? "SLEEP" : "WAKE"));
- } else {
+ if (err) {
brcmf_err("error while changing bus sleep state %d\n",
err);
goto done;
@@ -1065,6 +1065,11 @@ end:
} else {
brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
}
+ bus->sdiodev->sleeping = sleep;
+ if (sleep)
+ wake_up(&bus->sdiodev->idle_wait);
+ brcmf_dbg(SDIO, "new state %s\n",
+ (sleep ? "SLEEP" : "WAKE"));
done:
brcmf_dbg(SDIO, "Exit: err=%d\n", err);
return err;
@@ -1904,7 +1909,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
bus->rxpending = true;
for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
- !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if);
+ !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_STATE_DATA;
rd->seq_num++, rxleft--) {
/* Handle glomming separately */
@@ -2371,8 +2376,6 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
/* Send frames until the limit or some other event */
for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
pkt_num = 1;
- if (down_interruptible(&bus->tx_seq_lock))
- return cnt;
if (bus->txglom)
pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
bus->sdiodev->txglomsz);
@@ -2388,13 +2391,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
__skb_queue_tail(&pktq, pkt);
}
spin_unlock_bh(&bus->txq_lock);
- if (i == 0) {
- up(&bus->tx_seq_lock);
+ if (i == 0)
break;
- }
ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
- up(&bus->tx_seq_lock);
cnt += i;
@@ -2415,7 +2415,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
}
/* Deflow-control stack if needed */
- if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
+ if ((bus->sdiodev->state == BRCMF_STATE_DATA) &&
bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
bus->txoff = false;
brcmf_txflowblock(bus->sdiodev->dev, false);
@@ -2503,7 +2503,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
bus->watchdog_tsk = NULL;
}
- if (bus_if->state == BRCMF_BUS_DOWN) {
+ if (sdiodev->state != BRCMF_STATE_NOMEDIUM) {
sdio_claim_host(sdiodev->func[1]);
/* Enable clock for device interrupts */
@@ -2538,8 +2538,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
/* Clear any held glomming stuff */
- if (bus->glomd)
- brcmu_pkt_buf_free_skb(bus->glomd);
+ brcmu_pkt_buf_free_skb(bus->glomd);
brcmf_sdio_free_glom(bus);
/* Clear rx control and wake any waiters */
@@ -2604,6 +2603,21 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
return ret;
}
+static int brcmf_sdio_pm_resume_wait(struct brcmf_sdio_dev *sdiodev)
+{
+#ifdef CONFIG_PM_SLEEP
+ int retry;
+
+ /* Wait for possible resume to complete */
+ retry = 0;
+ while ((atomic_read(&sdiodev->suspend)) && (retry++ != 50))
+ msleep(20);
+ if (atomic_read(&sdiodev->suspend))
+ return -EIO;
+#endif
+ return 0;
+}
+
static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
{
u32 newstatus = 0;
@@ -2614,6 +2628,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
brcmf_dbg(TRACE, "Enter\n");
+ if (brcmf_sdio_pm_resume_wait(bus->sdiodev))
+ return;
+
sdio_claim_host(bus->sdiodev->func[1]);
/* If waiting for HTAVAIL, check status */
@@ -2720,17 +2737,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
brcmf_sdio_clrintr(bus);
if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
- (down_interruptible(&bus->tx_seq_lock) == 0)) {
- if (data_ok(bus)) {
- sdio_claim_host(bus->sdiodev->func[1]);
- err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
- bus->ctrl_frame_len);
- sdio_release_host(bus->sdiodev->func[1]);
-
- bus->ctrl_frame_stat = false;
- brcmf_sdio_wait_event_wakeup(bus);
- }
- up(&bus->tx_seq_lock);
+ data_ok(bus)) {
+ sdio_claim_host(bus->sdiodev->func[1]);
+ err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
+ bus->ctrl_frame_len);
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->ctrl_frame_err = err;
+ bus->ctrl_frame_stat = false;
+ brcmf_sdio_wait_event_wakeup(bus);
}
/* Send queued frames (limit 1 if rx may still be pending) */
if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
@@ -2741,7 +2755,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
brcmf_sdio_sendfromq(bus, framecnt);
}
- if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
+ if ((bus->sdiodev->state != BRCMF_STATE_DATA) || (err != 0)) {
brcmf_err("failed backplane access over SDIO, halting operation\n");
atomic_set(&bus->intstatus, 0);
} else if (atomic_read(&bus->intstatus) ||
@@ -2942,43 +2956,30 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
- int ret = -1;
+ int ret;
brcmf_dbg(TRACE, "Enter\n");
- if (down_interruptible(&bus->tx_seq_lock))
- return -EINTR;
-
- if (!data_ok(bus)) {
- brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
- bus->tx_max, bus->tx_seq);
- up(&bus->tx_seq_lock);
- /* Send from dpc */
- bus->ctrl_frame_buf = msg;
- bus->ctrl_frame_len = msglen;
- bus->ctrl_frame_stat = true;
-
- wait_event_interruptible_timeout(bus->ctrl_wait,
- !bus->ctrl_frame_stat,
- msecs_to_jiffies(2000));
-
- if (!bus->ctrl_frame_stat) {
- brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
- ret = 0;
- } else {
- brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
- bus->ctrl_frame_stat = false;
- if (down_interruptible(&bus->tx_seq_lock))
- return -EINTR;
- ret = -1;
- }
+ /* Send from dpc */
+ bus->ctrl_frame_buf = msg;
+ bus->ctrl_frame_len = msglen;
+ bus->ctrl_frame_stat = true;
+ if (atomic_read(&bus->dpc_tskcnt) == 0) {
+ atomic_inc(&bus->dpc_tskcnt);
+ queue_work(bus->brcmf_wq, &bus->datawork);
}
- if (ret == -1) {
- sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdio_bus_sleep(bus, false, false);
- ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
- sdio_release_host(bus->sdiodev->func[1]);
- up(&bus->tx_seq_lock);
+
+ wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
+ msecs_to_jiffies(CTL_DONE_TIMEOUT));
+
+ if (!bus->ctrl_frame_stat) {
+ brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
+ bus->ctrl_frame_err);
+ ret = bus->ctrl_frame_err;
+ } else {
+ brcmf_dbg(SDIO, "ctrl_frame timeout\n");
+ bus->ctrl_frame_stat = false;
+ ret = -ETIMEDOUT;
}
if (ret)
@@ -2986,7 +2987,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
else
bus->sdcnt.tx_ctlpkts++;
- return ret ? -EIO : 0;
+ return ret;
}
#ifdef DEBUG
@@ -3409,8 +3410,8 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
goto err;
}
- /* Allow HT Clock now that the ARM is running. */
- brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD);
+ /* Allow full data communication using DPC from now on. */
+ bus->sdiodev->state = BRCMF_STATE_DATA;
bcmerror = 0;
err:
@@ -3556,7 +3557,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
return;
}
- if (!brcmf_bus_ready(bus->sdiodev->bus_if)) {
+ if (bus->sdiodev->state != BRCMF_STATE_DATA) {
brcmf_err("bus is down. we have nothing to do\n");
return;
}
@@ -3579,10 +3580,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
{
-#ifdef DEBUG
- struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
-#endif /* DEBUG */
-
brcmf_dbg(TIMER, "Enter\n");
/* Poll period: check device if appropriate. */
@@ -3626,7 +3623,7 @@ static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
}
#ifdef DEBUG
/* Poll for console output periodically */
- if (bus_if && bus_if->state == BRCMF_BUS_DATA &&
+ if (bus->sdiodev->state == BRCMF_STATE_DATA &&
bus->console_interval != 0) {
bus->console.count += BRCMF_WD_POLL_MS;
if (bus->console.count >= bus->console_interval) {
@@ -3811,7 +3808,7 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
u32 val, rev;
val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
- if (sdiodev->func[0]->device == BRCM_SDIO_4335_4339_DEVICE_ID &&
+ if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
if (rev >= 2) {
@@ -3867,11 +3864,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
goto fail;
}
- /* SDIO register access works so moving
- * state from UNKNOWN to DOWN.
- */
- brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
-
bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
if (IS_ERR(bus->ci)) {
brcmf_err("brcmf_chip_attach failed!\n");
@@ -4005,18 +3997,16 @@ static void brcmf_sdio_firmware_callback(struct device *dev,
brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
- /* try to download image and nvram to the dongle */
- if (bus_if->state == BRCMF_BUS_DOWN) {
- bus->alp_only = true;
- err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
- if (err)
- goto fail;
- bus->alp_only = false;
- }
-
if (!bus_if->drvr)
return;
+ /* try to download image and nvram to the dongle */
+ bus->alp_only = true;
+ err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+ if (err)
+ goto fail;
+ bus->alp_only = false;
+
/* Start the watchdog timer */
bus->sdcnt.tickcnt = 0;
brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
@@ -4142,7 +4132,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
spin_lock_init(&bus->rxctl_lock);
spin_lock_init(&bus->txq_lock);
- sema_init(&bus->tx_seq_lock, 1);
init_waitqueue_head(&bus->ctrl_wait);
init_waitqueue_head(&bus->dcmd_resp_wait);
@@ -4213,7 +4202,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
bus->idleclock = BRCMF_IDLE_ACTIVE;
/* SR state */
- bus->sleeping = false;
bus->sr_enabled = false;
brcmf_sdio_debugfs_create(bus);
@@ -4254,7 +4242,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
destroy_workqueue(bus->brcmf_wq);
if (bus->ci) {
- if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+ if (bus->sdiodev->state != BRCMF_STATE_NOMEDIUM) {
sdio_claim_host(bus->sdiodev->func[1]);
brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
/* Leave the device in state where it is
@@ -4289,7 +4277,7 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick)
}
/* don't start the wd until fw is loaded */
- if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA)
+ if (bus->sdiodev->state != BRCMF_STATE_DATA)
return;
if (wdtick) {