1 files changed, 86 insertions, 184 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 24f65cd5385..6db51a666f6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -25,6 +25,7 @@
 #include <dhd_bus.h>
 #include <dhd_dbg.h>
 
+#include "firmware.h"
 #include "usb_rdl.h"
 #include "usb.h"
 
@@ -61,12 +62,6 @@ struct brcmf_usb_image {
 	u8 *image;
 	int image_len;
 };
-static struct list_head fw_image_list;
-
-struct intr_transfer_buf {
-	u32 notification;
-	u32 reserved;
-};
 
 struct brcmf_usbdev_info {
 	struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
@@ -75,7 +70,7 @@ struct brcmf_usbdev_info {
 	struct list_head rx_postq;
 	struct list_head tx_freeq;
 	struct list_head tx_postq;
-	uint rx_pipe, tx_pipe, intr_pipe, rx_pipe2;
+	uint rx_pipe, tx_pipe, rx_pipe2;
 
 	int rx_low_watermark;
 	int tx_low_watermark;
@@ -87,7 +82,7 @@ struct brcmf_usbdev_info {
 	struct brcmf_usbreq *tx_reqs;
 	struct brcmf_usbreq *rx_reqs;
 
-	u8 *image;	/* buffer for combine fw and nvram */
+	const u8 *image;	/* buffer for combine fw and nvram */
 	int image_len;
 
 	struct usb_device *usbdev;
@@ -104,10 +99,6 @@ struct brcmf_usbdev_info {
 	ulong ctl_op;
 
 	struct urb *bulk_urb; /* used for FW download */
-	struct urb *intr_urb; /* URB for interrupt endpoint */
-	int intr_size;          /* Size of interrupt message */
-	int interval;           /* Interrupt polling interval */
-	struct intr_transfer_buf intr; /* Data buffer for interrupt endpoint */
 };
 
 static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
@@ -531,39 +522,6 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 	}
 }
 
-static void
-brcmf_usb_intr_complete(struct urb *urb)
-{
-	struct brcmf_usbdev_info *devinfo =
-			(struct brcmf_usbdev_info *)urb->context;
-	int err;
-
-	brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
-
-	if (devinfo == NULL)
-		return;
-
-	if (unlikely(urb->status)) {
-		if (urb->status == -ENOENT ||
-		    urb->status == -ESHUTDOWN ||
-		    urb->status == -ENODEV) {
-			brcmf_usb_state_change(devinfo,
-					       BRCMFMAC_USB_STATE_DOWN);
-		}
-	}
-
-	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN) {
-		brcmf_err("intr cb when DBUS down, ignoring\n");
-		return;
-	}
-
-	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
-		err = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
-		if (err)
-			brcmf_err("usb_submit_urb, err=%d\n", err);
-	}
-}
-
 static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 {
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
@@ -619,7 +577,6 @@ static int brcmf_usb_up(struct device *dev)
 {
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 	u16 ifnum;
-	int ret;
 
 	brcmf_dbg(USB, "Enter\n");
 	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
@@ -628,23 +585,6 @@ static int brcmf_usb_up(struct device *dev)
 	/* Success, indicate devinfo is fully up */
 	brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
 
-	if (devinfo->intr_urb) {
-		usb_fill_int_urb(devinfo->intr_urb, devinfo->usbdev,
-			devinfo->intr_pipe,
-			&devinfo->intr,
-			devinfo->intr_size,
-			(usb_complete_t)brcmf_usb_intr_complete,
-			devinfo,
-			devinfo->interval);
-
-		ret = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
-		if (ret) {
-			brcmf_err("USB_SUBMIT_URB failed with status %d\n",
-				  ret);
-			return -EINVAL;
-		}
-	}
-
 	if (devinfo->ctl_urb) {
 		devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
 		devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
@@ -681,8 +621,6 @@ static void brcmf_usb_down(struct device *dev)
 		return;
 
 	brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
-	if (devinfo->intr_urb)
-		usb_kill_urb(devinfo->intr_urb);
 
 	if (devinfo->ctl_urb)
 		usb_kill_urb(devinfo->ctl_urb);
@@ -1021,7 +959,7 @@ brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
 	}
 
 	err = brcmf_usb_dlstart(devinfo,
-		devinfo->image, devinfo->image_len);
+		(u8 *)devinfo->image, devinfo->image_len);
 	if (err == 0)
 		err = brcmf_usb_dlrun(devinfo);
 	return err;
@@ -1036,7 +974,6 @@ static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
 	brcmf_usb_free_q(&devinfo->rx_freeq, false);
 	brcmf_usb_free_q(&devinfo->tx_freeq, false);
 
-	usb_free_urb(devinfo->intr_urb);
 	usb_free_urb(devinfo->ctl_urb);
 	usb_free_urb(devinfo->bulk_urb);
 
@@ -1080,68 +1017,20 @@ static int check_file(const u8 *headers)
 	return -1;
 }
 
-static int brcmf_usb_get_fw(struct brcmf_usbdev_info *devinfo)
+static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
 {
-	s8 *fwname;
-	const struct firmware *fw;
-	struct brcmf_usb_image *fw_image;
-	int err;
-
-	brcmf_dbg(USB, "Enter\n");
 	switch (devinfo->bus_pub.devid) {
 	case 43143:
-		fwname = BRCMF_USB_43143_FW_NAME;
-		break;
+		return BRCMF_USB_43143_FW_NAME;
 	case 43235:
 	case 43236:
 	case 43238:
-		fwname = BRCMF_USB_43236_FW_NAME;
-		break;
+		return BRCMF_USB_43236_FW_NAME;
 	case 43242:
-		fwname = BRCMF_USB_43242_FW_NAME;
-		break;
+		return BRCMF_USB_43242_FW_NAME;
 	default:
-		return -EINVAL;
-		break;
-	}
-	brcmf_dbg(USB, "Loading FW %s\n", fwname);
-	list_for_each_entry(fw_image, &fw_image_list, list) {
-		if (fw_image->fwname == fwname) {
-			devinfo->image = fw_image->image;
-			devinfo->image_len = fw_image->image_len;
-			return 0;
-		}
-	}
-	/* fw image not yet loaded. Load it now and add to list */
-	err = request_firmware(&fw, fwname, devinfo->dev);
-	if (!fw) {
-		brcmf_err("fail to request firmware %s\n", fwname);
-		return err;
-	}
-	if (check_file(fw->data) < 0) {
-		brcmf_err("invalid firmware %s\n", fwname);
-		return -EINVAL;
+		return NULL;
 	}
-
-	fw_image = kzalloc(sizeof(*fw_image), GFP_ATOMIC);
-	if (!fw_image)
-		return -ENOMEM;
-	INIT_LIST_HEAD(&fw_image->list);
-	list_add_tail(&fw_image->list, &fw_image_list);
-	fw_image->fwname = fwname;
-	fw_image->image = vmalloc(fw->size);
-	if (!fw_image->image)
-		return -ENOMEM;
-
-	memcpy(fw_image->image, fw->data, fw->size);
-	fw_image->image_len = fw->size;
-
-	release_firmware(fw);
-
-	devinfo->image = fw_image->image;
-	devinfo->image_len = fw_image->image_len;
-
-	return 0;
 }
 
 
@@ -1186,11 +1075,6 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
 		goto error;
 	devinfo->tx_freecount = ntxq;
 
-	devinfo->intr_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!devinfo->intr_urb) {
-		brcmf_err("usb_alloc_urb (intr) failed\n");
-		goto error;
-	}
 	devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!devinfo->ctl_urb) {
 		brcmf_err("usb_alloc_urb (ctl) failed\n");
@@ -1202,16 +1086,6 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
 		goto error;
 	}
 
-	if (!brcmf_usb_dlneeded(devinfo))
-		return &devinfo->bus_pub;
-
-	brcmf_dbg(USB, "Start fw downloading\n");
-	if (brcmf_usb_get_fw(devinfo))
-		goto error;
-
-	if (brcmf_usb_fw_download(devinfo))
-		goto error;
-
 	return &devinfo->bus_pub;
 
 error:
@@ -1222,18 +1096,77 @@ error:
 
 static struct brcmf_bus_ops brcmf_usb_bus_ops = {
 	.txdata = brcmf_usb_tx,
-	.init = brcmf_usb_up,
 	.stop = brcmf_usb_down,
 	.txctl = brcmf_usb_tx_ctlpkt,
 	.rxctl = brcmf_usb_rx_ctlpkt,
 };
 
+static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
+{
+	int ret;
+
+	/* Attach to the common driver interface */
+	ret = brcmf_attach(devinfo->dev);
+	if (ret) {
+		brcmf_err("brcmf_attach failed\n");
+		return ret;
+	}
+
+	ret = brcmf_usb_up(devinfo->dev);
+	if (ret)
+		goto fail;
+
+	ret = brcmf_bus_start(devinfo->dev);
+	if (ret)
+		goto fail;
+
+	return 0;
+fail:
+	brcmf_detach(devinfo->dev);
+	return ret;
+}
+
+static void brcmf_usb_probe_phase2(struct device *dev,
+				   const struct firmware *fw,
+				   void *nvram, u32 nvlen)
+{
+	struct brcmf_bus *bus = dev_get_drvdata(dev);
+	struct brcmf_usbdev_info *devinfo;
+	int ret;
+
+	brcmf_dbg(USB, "Start fw downloading\n");
+	ret = check_file(fw->data);
+	if (ret < 0) {
+		brcmf_err("invalid firmware\n");
+		release_firmware(fw);
+		goto error;
+	}
+
+	devinfo = bus->bus_priv.usb->devinfo;
+	devinfo->image = fw->data;
+	devinfo->image_len = fw->size;
+
+	ret = brcmf_usb_fw_download(devinfo);
+	release_firmware(fw);
+	if (ret)
+		goto error;
+
+	ret = brcmf_usb_bus_setup(devinfo);
+	if (ret)
+		goto error;
+
+	return;
+error:
+	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
+	device_release_driver(dev);
+}
+
 static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 {
 	struct brcmf_bus *bus = NULL;
 	struct brcmf_usbdev *bus_pub = NULL;
-	int ret;
 	struct device *dev = devinfo->dev;
+	int ret;
 
 	brcmf_dbg(USB, "Enter\n");
 	bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
@@ -1254,22 +1187,18 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	bus->chip = bus_pub->devid;
 	bus->chiprev = bus_pub->chiprev;
 	bus->proto_type = BRCMF_PROTO_BCDC;
+	bus->always_use_fws_queue = true;
 
-	/* Attach to the common driver interface */
-	ret = brcmf_attach(dev);
-	if (ret) {
-		brcmf_err("brcmf_attach failed\n");
-		goto fail;
-	}
-
-	ret = brcmf_bus_start(dev);
-	if (ret) {
-		brcmf_err("dongle is not responding\n");
-		brcmf_detach(dev);
-		goto fail;
+	if (!brcmf_usb_dlneeded(devinfo)) {
+		ret = brcmf_usb_bus_setup(devinfo);
+		if (ret)
+			goto fail;
 	}
-
+	/* request firmware here */
+	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
+			       brcmf_usb_probe_phase2);
 	return 0;
+
 fail:
 	/* Release resources in reverse order */
 	kfree(bus);
@@ -1357,9 +1286,6 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto fail;
 	}
 
-	endpoint_num = endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	devinfo->intr_pipe = usb_rcvintpipe(usb, endpoint_num);
-
 	devinfo->rx_pipe = 0;
 	devinfo->rx_pipe2 = 0;
 	devinfo->tx_pipe = 0;
@@ -1391,16 +1317,9 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		}
 	}
 
-	/* Allocate interrupt URB and data buffer */
-	/* RNDIS says 8-byte intr, our old drivers used 4-byte */
-	if (IFEPDESC(usb, CONTROL_IF, 0).wMaxPacketSize == cpu_to_le16(16))
-		devinfo->intr_size = 8;
-	else
-		devinfo->intr_size = 4;
-
-	devinfo->interval = IFEPDESC(usb, CONTROL_IF, 0).bInterval;
-
-	if (usb->speed == USB_SPEED_HIGH)
+	if (usb->speed == USB_SPEED_SUPER)
+		brcmf_dbg(USB, "Broadcom super speed USB wireless device detected\n");
+	else if (usb->speed == USB_SPEED_HIGH)
 		brcmf_dbg(USB, "Broadcom high speed USB wireless device detected\n");
 	else
 		brcmf_dbg(USB, "Broadcom full speed USB wireless device detected\n");
@@ -1455,23 +1374,18 @@ static int brcmf_usb_resume(struct usb_interface *intf)
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
 
 	brcmf_dbg(USB, "Enter\n");
-	if (!brcmf_attach(devinfo->dev))
-		return brcmf_bus_start(&usb->dev);
-
-	return 0;
+	return brcmf_usb_bus_setup(devinfo);
 }
 
 static int brcmf_usb_reset_resume(struct usb_interface *intf)
 {
 	struct usb_device *usb = interface_to_usbdev(intf);
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
-
 	brcmf_dbg(USB, "Enter\n");
 
-	if (!brcmf_usb_fw_download(devinfo))
-		return brcmf_usb_resume(intf);
-
-	return -EIO;
+	return brcmf_fw_get_firmwares(&usb->dev, 0,
+				      brcmf_usb_get_fwname(devinfo), NULL,
+				      brcmf_usb_probe_phase2);
 }
 
 #define BRCMF_USB_VENDOR_ID_BROADCOM	0x0a5c
@@ -1506,16 +1420,6 @@ static struct usb_driver brcmf_usbdrvr = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-static void brcmf_release_fw(struct list_head *q)
-{
-	struct brcmf_usb_image *fw_image, *next;
-
-	list_for_each_entry_safe(fw_image, next, q, list) {
-		vfree(fw_image->image);
-		list_del_init(&fw_image->list);
-	}
-}
-
 static int brcmf_usb_reset_device(struct device *dev, void *notused)
 {
 	/* device past is the usb interface so we
@@ -1534,12 +1438,10 @@ void brcmf_usb_exit(void)
 	ret = driver_for_each_device(drv, NULL, NULL,
 				     brcmf_usb_reset_device);
 	usb_deregister(&brcmf_usbdrvr);
-	brcmf_release_fw(&fw_image_list);
 }
 
 void brcmf_usb_register(void)
 {
 	brcmf_dbg(USB, "Enter\n");
-	INIT_LIST_HEAD(&fw_image_list);
 	usb_register(&brcmf_usbdrvr);
 }