diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmsmac/nicpci.c')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/nicpci.c | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c b/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c deleted file mode 100644 index cd3899b7414..00000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include <defs.h> -#include <soc.h> -#include <chipcommon.h> -#include "aiutils.h" -#include "pub.h" -#include "nicpci.h" - -/* SPROM offsets */ -#define SRSH_ASPM_OFFSET 4 /* word 4 */ -#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */ -#define SRSH_ASPM_L1_ENB 0x10 /* bit 4 */ -#define SRSH_ASPM_L0s_ENB 0x8 /* bit 3 */ - -#define SRSH_PCIE_MISC_CONFIG 5 /* word 5 */ -#define SRSH_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ -#define SRSH_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ -#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */ -#define SRSH_BD_OFFSET 6 /* word 6 */ - -/* chipcontrol */ -#define CHIPCTRL_4321_PLL_DOWN 0x800000/* serdes PLL down override */ - -/* MDIO control */ -#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -#define MDIOCTL_DIVISOR_VAL 0x2 -#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -#define MDIOCTL_ACCESS_DONE 0x100 /* Transaction complete */ - -/* MDIO Data */ -#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -#define MDIODATA_TA 0x00020000 /* Turnaround */ - -#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK 0x0f800000 - /* Physmedia devaddr Mask */ - -/* MDIO Data for older revisions < 10 */ -#define MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK_OLD 0x003c0000 - /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 - /* Physmedia devaddr Mask */ - -/* Transactions flags */ -#define MDIODATA_WRITE 0x10000000 -#define MDIODATA_READ 0x20000000 -#define MDIODATA_START 0x40000000 - -#define MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ - -/* serdes regs (rev < 10) */ -#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ - -/* SERDES RX registers */ -#define SERDES_RX_CTRL 1 /* Rx cntrl */ -#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ -#define SERDES_RX_CDR 6 /* CDR */ -#define SERDES_RX_CDRBW 7 /* CDR BW */ -/* SERDES RX control register */ -#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ - -/* SERDES PLL registers */ -#define SERDES_PLL_CTRL 1 /* PLL control reg */ -#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ - -/* Linkcontrol reg offset in PCIE Cap */ -#define PCIE_CAP_LINKCTRL_OFFSET 16 /* offset in pcie cap */ -#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */ -#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */ -#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */ - -#define PCIE_ASPM_ENAB 3 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L1_ENAB 2 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L0s_ENAB 1 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_DISAB 0 /* ASPM L0s & L1 in linkctrl */ - -/* Power management threshold */ -#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */ -#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */ -#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */ -#define PCIE_ASPMTIMER_EXTEND 0x01000000 - /* > rev7: - * enable extend ASPM timer - */ - -/* different register spaces to access thru pcie indirect access */ -#define PCIE_CONFIGREGS 1 /* Access to config space */ -#define PCIE_PCIEREGS 2 /* Access to pcie registers */ - -/* PCIE protocol PHY diagnostic registers */ -#define PCIE_PLP_STATUSREG 0x204 /* Status */ - -/* Status reg PCIE_PLP_STATUSREG */ -#define PCIE_PLP_POLARITYINV_STAT 0x10 - -/* PCIE protocol DLLP diagnostic registers */ -#define PCIE_DLLP_LCREG 0x100 /* Link Control */ -#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ - -/* PCIE protocol TLP diagnostic registers */ -#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ - -/* Sonics to PCI translation types */ -#define SBTOPCI_PREF 0x4 /* prefetch enable */ -#define SBTOPCI_BURST 0x8 /* burst enable */ -#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ - -#define PCI_CLKRUN_DSBL 0x8000 /* Bit 15 forceClkrun */ - -/* PCI core index in SROM shadow area */ -#define SRSH_PI_OFFSET 0 /* first word */ -#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ -#define SRSH_PI_SHIFT 12 /* bit 15:12 */ - -#define PCIREGOFFS(field) offsetof(struct sbpciregs, field) -#define PCIEREGOFFS(field) offsetof(struct sbpcieregs, field) - -/* Sonics side: PCI core and host control registers */ -struct sbpciregs { - u32 control; /* PCI control */ - u32 PAD[3]; - u32 arbcontrol; /* PCI arbiter control */ - u32 clkrun; /* Clkrun Control (>=rev11) */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status */ - u32 intmask; /* Interrupt mask */ - u32 sbtopcimailbox; /* Sonics to PCI mailbox */ - u32 PAD[9]; - u32 bcastaddr; /* Sonics broadcast address */ - u32 bcastdata; /* Sonics broadcast data */ - u32 PAD[2]; - u32 gpioin; /* ro: gpio input (>=rev2) */ - u32 gpioout; /* rw: gpio output (>=rev2) */ - u32 gpioouten; /* rw: gpio output enable (>= rev2) */ - u32 gpiocontrol; /* rw: gpio control (>= rev2) */ - u32 PAD[36]; - u32 sbtopci0; /* Sonics to PCI translation 0 */ - u32 sbtopci1; /* Sonics to PCI translation 1 */ - u32 sbtopci2; /* Sonics to PCI translation 2 */ - u32 PAD[189]; - u32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ - u16 sprom[36]; /* SPROM shadow Area */ - u32 PAD[46]; -}; - -/* SB side: PCIE core and host control registers */ -struct sbpcieregs { - u32 control; /* host mode only */ - u32 PAD[2]; - u32 biststatus; /* bist Status: 0x00C */ - u32 gpiosel; /* PCIE gpio sel: 0x010 */ - u32 gpioouten; /* PCIE gpio outen: 0x14 */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status: 0x20 */ - u32 intmask; /* Interrupt mask: 0x24 */ - u32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ - u32 PAD[53]; - u32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ - u32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ - u32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ - u32 PAD[5]; - - /* pcie core supports in direct access to config space */ - u32 configaddr; /* pcie config space access: Address field: 0x120 */ - u32 configdata; /* pcie config space access: Data field: 0x124 */ - - /* mdio access to serdes */ - u32 mdiocontrol; /* controls the mdio access: 0x128 */ - u32 mdiodata; /* Data to the mdio access: 0x12c */ - - /* pcie protocol phy/dllp/tlp register indirect access mechanism */ - u32 pcieindaddr; /* indirect access to - * the internal register: 0x130 - */ - u32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */ - - u32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */ - u32 PAD[177]; - u32 pciecfg[4][64]; /* 0x400 - 0x7FF, PCIE Cfg Space */ - u16 sprom[64]; /* SPROM shadow Area */ -}; - -struct pcicore_info { - struct bcma_device *core; - struct si_pub *sih; /* System interconnect handle */ - struct pci_dev *dev; - - u8 pmecap_offset; /* PM Capability offset in the config space */ - bool pmecap; /* Capable of generating PME */ -}; - -/* Initialize the PCI core. - * It's caller's responsibility to make sure that this is done only once - */ -struct pcicore_info *pcicore_init(struct si_pub *sih, struct bcma_device *core) -{ - struct pcicore_info *pi; - - /* alloc struct pcicore_info */ - pi = kzalloc(sizeof(struct pcicore_info), GFP_ATOMIC); - if (pi == NULL) - return NULL; - - pi->sih = sih; - pi->dev = core->bus->host_pci; - pi->core = core; - - return pi; -} - -void pcicore_deinit(struct pcicore_info *pch) -{ - kfree(pch); -} |