diff options
Diffstat (limited to 'drivers/net/wireless/ieee802_11.h')
| -rw-r--r-- | drivers/net/wireless/ieee802_11.h | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/drivers/net/wireless/ieee802_11.h b/drivers/net/wireless/ieee802_11.h new file mode 100644 index 00000000000..53dd5248f9f --- /dev/null +++ b/drivers/net/wireless/ieee802_11.h @@ -0,0 +1,78 @@ +#ifndef _IEEE802_11_H +#define _IEEE802_11_H + +#define IEEE802_11_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + + +#define IEEE802_11_HLEN 30 +#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN) + +struct ieee802_11_hdr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; +} __attribute__ ((packed)); + +/* Frame control field constants */ +#define IEEE802_11_FCTL_VERS 0x0002 +#define IEEE802_11_FCTL_FTYPE 0x000c +#define IEEE802_11_FCTL_STYPE 0x00f0 +#define IEEE802_11_FCTL_TODS 0x0100 +#define IEEE802_11_FCTL_FROMDS 0x0200 +#define IEEE802_11_FCTL_MOREFRAGS 0x0400 +#define IEEE802_11_FCTL_RETRY 0x0800 +#define IEEE802_11_FCTL_PM 0x1000 +#define IEEE802_11_FCTL_MOREDATA 0x2000 +#define IEEE802_11_FCTL_WEP 0x4000 +#define IEEE802_11_FCTL_ORDER 0x8000 + +#define IEEE802_11_FTYPE_MGMT 0x0000 +#define IEEE802_11_FTYPE_CTL 0x0004 +#define IEEE802_11_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE802_11_STYPE_ASSOC_REQ 0x0000 +#define IEEE802_11_STYPE_ASSOC_RESP 0x0010 +#define IEEE802_11_STYPE_REASSOC_REQ 0x0020 +#define IEEE802_11_STYPE_REASSOC_RESP 0x0030 +#define IEEE802_11_STYPE_PROBE_REQ 0x0040 +#define IEEE802_11_STYPE_PROBE_RESP 0x0050 +#define IEEE802_11_STYPE_BEACON 0x0080 +#define IEEE802_11_STYPE_ATIM 0x0090 +#define IEEE802_11_STYPE_DISASSOC 0x00A0 +#define IEEE802_11_STYPE_AUTH 0x00B0 +#define IEEE802_11_STYPE_DEAUTH 0x00C0 + +/* control */ +#define IEEE802_11_STYPE_PSPOLL 0x00A0 +#define IEEE802_11_STYPE_RTS 0x00B0 +#define IEEE802_11_STYPE_CTS 0x00C0 +#define IEEE802_11_STYPE_ACK 0x00D0 +#define IEEE802_11_STYPE_CFEND 0x00E0 +#define IEEE802_11_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE802_11_STYPE_DATA 0x0000 +#define IEEE802_11_STYPE_DATA_CFACK 0x0010 +#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020 +#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE802_11_STYPE_NULLFUNC 0x0040 +#define IEEE802_11_STYPE_CFACK 0x0050 +#define IEEE802_11_STYPE_CFPOLL 0x0060 +#define IEEE802_11_STYPE_CFACKPOLL 0x0070 + +#define IEEE802_11_SCTL_FRAG 0x000F +#define IEEE802_11_SCTL_SEQ 0xFFF0 + +#endif /* _IEEE802_11_H */ |