diff options
Diffstat (limited to 'drivers/net/wireless/ipw2100.c')
-rw-r--r-- | drivers/net/wireless/ipw2100.c | 8679 |
1 files changed, 8679 insertions, 0 deletions
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c new file mode 100644 index 00000000000..a47fce4bead --- /dev/null +++ b/drivers/net/wireless/ipw2100.c @@ -0,0 +1,8679 @@ +/****************************************************************************** + + Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + + Portions of this file are based on the sample_* files provided by Wireless + Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes + <jt@hpl.hp.com> + + Portions of this file are based on the Host AP project, + Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + <jkmaline@cc.hut.fi> + Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + + Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and + ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c + available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox + +******************************************************************************/ +/* + + Initial driver on which this is based was developed by Janusz Gorycki, + Maciej Urbaniak, and Maciej Sosnowski. + + Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak. + +Theory of Operation + +Tx - Commands and Data + +Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs) +Each TBD contains a pointer to the physical (dma_addr_t) address of data being +sent to the firmware as well as the length of the data. + +The host writes to the TBD queue at the WRITE index. The WRITE index points +to the _next_ packet to be written and is advanced when after the TBD has been +filled. + +The firmware pulls from the TBD queue at the READ index. The READ index points +to the currently being read entry, and is advanced once the firmware is +done with a packet. + +When data is sent to the firmware, the first TBD is used to indicate to the +firmware if a Command or Data is being sent. If it is Command, all of the +command information is contained within the physical address referred to by the +TBD. If it is Data, the first TBD indicates the type of data packet, number +of fragments, etc. The next TBD then referrs to the actual packet location. + +The Tx flow cycle is as follows: + +1) ipw2100_tx() is called by kernel with SKB to transmit +2) Packet is move from the tx_free_list and appended to the transmit pending + list (tx_pend_list) +3) work is scheduled to move pending packets into the shared circular queue. +4) when placing packet in the circular queue, the incoming SKB is DMA mapped + to a physical address. That address is entered into a TBD. Two TBDs are + filled out. The first indicating a data packet, the second referring to the + actual payload data. +5) the packet is removed from tx_pend_list and placed on the end of the + firmware pending list (fw_pend_list) +6) firmware is notified that the WRITE index has +7) Once the firmware has processed the TBD, INTA is triggered. +8) For each Tx interrupt received from the firmware, the READ index is checked + to see which TBDs are done being processed. +9) For each TBD that has been processed, the ISR pulls the oldest packet + from the fw_pend_list. +10)The packet structure contained in the fw_pend_list is then used + to unmap the DMA address and to free the SKB originally passed to the driver + from the kernel. +11)The packet structure is placed onto the tx_free_list + +The above steps are the same for commands, only the msg_free_list/msg_pend_list +are used instead of tx_free_list/tx_pend_list + +... + +Critical Sections / Locking : + +There are two locks utilized. The first is the low level lock (priv->low_lock) +that protects the following: + +- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows: + + tx_free_list : Holds pre-allocated Tx buffers. + TAIL modified in __ipw2100_tx_process() + HEAD modified in ipw2100_tx() + + tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring + TAIL modified ipw2100_tx() + HEAD modified by ipw2100_tx_send_data() + + msg_free_list : Holds pre-allocated Msg (Command) buffers + TAIL modified in __ipw2100_tx_process() + HEAD modified in ipw2100_hw_send_command() + + msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring + TAIL modified in ipw2100_hw_send_command() + HEAD modified in ipw2100_tx_send_commands() + + The flow of data on the TX side is as follows: + + MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST + TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST + + The methods that work on the TBD ring are protected via priv->low_lock. + +- The internal data state of the device itself +- Access to the firmware read/write indexes for the BD queues + and associated logic + +All external entry functions are locked with the priv->action_lock to ensure +that only one external action is invoked at a time. + + +*/ + +#include <linux/compiler.h> +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/if_arp.h> +#include <linux/in6.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/proc_fs.h> +#include <linux/skbuff.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#define __KERNEL_SYSCALLS__ +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/unistd.h> +#include <linux/stringify.h> +#include <linux/tcp.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/time.h> +#include <linux/firmware.h> +#include <linux/acpi.h> +#include <linux/ctype.h> + +#include "ipw2100.h" + +#define IPW2100_VERSION "1.1.0" + +#define DRV_NAME "ipw2100" +#define DRV_VERSION IPW2100_VERSION +#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver" +#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation" + + +/* Debugging stuff */ +#ifdef CONFIG_IPW_DEBUG +#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */ +#endif + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); + +static int debug = 0; +static int mode = 0; +static int channel = 0; +static int associate = 1; +static int disable = 0; +#ifdef CONFIG_PM +static struct ipw2100_fw ipw2100_firmware; +#endif + +#include <linux/moduleparam.h> +module_param(debug, int, 0444); +module_param(mode, int, 0444); +module_param(channel, int, 0444); +module_param(associate, int, 0444); +module_param(disable, int, 0444); + +MODULE_PARM_DESC(debug, "debug level"); +MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); +MODULE_PARM_DESC(channel, "channel"); +MODULE_PARM_DESC(associate, "auto associate when scanning (default on)"); +MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); + +static u32 ipw2100_debug_level = IPW_DL_NONE; + +#ifdef CONFIG_IPW_DEBUG +#define IPW_DEBUG(level, message...) \ +do { \ + if (ipw2100_debug_level & (level)) { \ + printk(KERN_DEBUG "ipw2100: %c %s ", \ + in_interrupt() ? 'I' : 'U', __FUNCTION__); \ + printk(message); \ + } \ +} while (0) +#else +#define IPW_DEBUG(level, message...) do {} while (0) +#endif /* CONFIG_IPW_DEBUG */ + +#ifdef CONFIG_IPW_DEBUG +static const char *command_types[] = { + "undefined", + "unused", /* HOST_ATTENTION */ + "HOST_COMPLETE", + "unused", /* SLEEP */ + "unused", /* HOST_POWER_DOWN */ + "unused", + "SYSTEM_CONFIG", + "unused", /* SET_IMR */ + "SSID", + "MANDATORY_BSSID", + "AUTHENTICATION_TYPE", + "ADAPTER_ADDRESS", + "PORT_TYPE", + "INTERNATIONAL_MODE", + "CHANNEL", + "RTS_THRESHOLD", + "FRAG_THRESHOLD", + "POWER_MODE", + "TX_RATES", + "BASIC_TX_RATES", + "WEP_KEY_INFO", + "unused", + "unused", + "unused", + "unused", + "WEP_KEY_INDEX", + "WEP_FLAGS", + "ADD_MULTICAST", + "CLEAR_ALL_MULTICAST", + "BEACON_INTERVAL", + "ATIM_WINDOW", + "CLEAR_STATISTICS", + "undefined", + "undefined", + "undefined", + "undefined", + "TX_POWER_INDEX", + "undefined", + "undefined", + "undefined", + "undefined", + "undefined", + "undefined", + "BROADCAST_SCAN", + "CARD_DISABLE", + "PREFERRED_BSSID", + "SET_SCAN_OPTIONS", + "SCAN_DWELL_TIME", + "SWEEP_TABLE", + "AP_OR_STATION_TABLE", + "GROUP_ORDINALS", + "SHORT_RETRY_LIMIT", + "LONG_RETRY_LIMIT", + "unused", /* SAVE_CALIBRATION */ + "unused", /* RESTORE_CALIBRATION */ + "undefined", + "undefined", + "undefined", + "HOST_PRE_POWER_DOWN", + "unused", /* HOST_INTERRUPT_COALESCING */ + "undefined", + "CARD_DISABLE_PHY_OFF", + "MSDU_TX_RATES" + "undefined", + "undefined", + "SET_STATION_STAT_BITS", + "CLEAR_STATIONS_STAT_BITS", + "LEAP_ROGUE_MODE", + "SET_SECURITY_INFORMATION", + "DISASSOCIATION_BSSID", + "SET_WPA_ASS_IE" +}; +#endif + + +/* Pre-decl until we get the code solid and then we can clean it up */ +static void ipw2100_tx_send_commands(struct ipw2100_priv *priv); +static void ipw2100_tx_send_data(struct ipw2100_priv *priv); +static int ipw2100_adapter_setup(struct ipw2100_priv *priv); + +static void ipw2100_queues_initialize(struct ipw2100_priv *priv); +static void ipw2100_queues_free(struct ipw2100_priv *priv); +static int ipw2100_queues_allocate(struct ipw2100_priv *priv); + +static int ipw2100_fw_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_get_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, + size_t max); +static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, + size_t max); +static void ipw2100_release_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_ucode_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static void ipw2100_wx_event_work(struct ipw2100_priv *priv); +static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev); +static struct iw_handler_def ipw2100_wx_handler_def; + + +static inline void read_register(struct net_device *dev, u32 reg, u32 *val) +{ + *val = readl((void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val); +} + +static inline void write_register(struct net_device *dev, u32 reg, u32 val) +{ + writel(val, (void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val); +} + +static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val) +{ + *val = readw((void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val); +} + +static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val) +{ + *val = readb((void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val); +} + +static inline void write_register_word(struct net_device *dev, u32 reg, u16 val) +{ + writew(val, (void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val); +} + + +static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val) +{ + writeb(val, (void *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val); +} + +static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr) +{ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); +} + +static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val) +{ + write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val); +} + +static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len, + const u8 *buf) +{ + u32 aligned_addr; + u32 aligned_len; + u32 dif_len; + u32 i; + + /* read first nibble byte by byte */ + aligned_addr = addr & (~0x3); + dif_len = addr - aligned_addr; + if (dif_len) { + /* Start reading at aligned_addr + dif_len */ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + write_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, + *buf); + + len -= dif_len; + aligned_addr += 4; + } + + /* read DWs through autoincrement registers */ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + aligned_addr); + aligned_len = len & (~0x3); + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + write_register( + dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf); + + /* copy the last nibble */ + dif_len = len - aligned_len; + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + write_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf); +} + +static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len, + u8 *buf) +{ + u32 aligned_addr; + u32 aligned_len; + u32 dif_len; + u32 i; + + /* read first nibble byte by byte */ + aligned_addr = addr & (~0x3); + dif_len = addr - aligned_addr; + if (dif_len) { + /* Start reading at aligned_addr + dif_len */ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + read_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf); + + len -= dif_len; + aligned_addr += 4; + } + + /* read DWs through autoincrement registers */ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + aligned_addr); + aligned_len = len & (~0x3); + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + read_register(dev, IPW_REG_AUTOINCREMENT_DATA, + (u32 *)buf); + + /* copy the last nibble */ + dif_len = len - aligned_len; + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + + i, buf); +} + +static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev) +{ + return (dev->base_addr && + (readl((void *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START)) + == IPW_DATA_DOA_DEBUG_VALUE)); +} + +static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, + void *val, u32 *len) +{ + struct ipw2100_ordinals *ordinals = &priv->ordinals; + u32 addr; + u32 field_info; + u16 field_len; + u16 field_count; + u32 total_length; + + if (ordinals->table1_addr == 0) { + printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " + "before they have been loaded.\n"); + return -EINVAL; + } + + if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { + if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + printk(KERN_WARNING DRV_NAME + ": ordinal buffer length too small, need %zd\n", + IPW_ORD_TAB_1_ENTRY_SIZE); + + return -EINVAL; + } + + read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2), + &addr); + read_nic_dword(priv->net_dev, addr, val); + + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + return 0; + } + + if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) { + + ord -= IPW_START_ORD_TAB_2; + + /* get the address of statistic */ + read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3), + &addr); + + /* get the second DW of statistics ; + * two 16-bit words - first is length, second is count */ + read_nic_dword(priv->net_dev, + ordinals->table2_addr + (ord << 3) + sizeof(u32), + &field_info); + + /* get each entry length */ + field_len = *((u16 *)&field_info); + + /* get number of entries */ + field_count = *(((u16 *)&field_info) + 1); + + /* abort if no enought memory */ + total_length = field_len * field_count; + if (total_length > *len) { + *len = total_length; + return -EINVAL; + } + + *len = total_length; + if (!total_length) + return 0; + + /* read the ordinal data from the SRAM */ + read_nic_memory(priv->net_dev, addr, total_length, val); + + return 0; + } + + printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " + "in table 2\n", ord); + + return -EINVAL; +} + +static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val, + u32 *len) +{ + struct ipw2100_ordinals *ordinals = &priv->ordinals; + u32 addr; + + if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { + if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) { + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + IPW_DEBUG_INFO("wrong size\n"); + return -EINVAL; + } + + read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2), + &addr); + + write_nic_dword(priv->net_dev, addr, *val); + + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + return 0; + } + + IPW_DEBUG_INFO("wrong table\n"); + if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) + return -EINVAL; + + return -EINVAL; +} + +static char *snprint_line(char *buf, size_t count, + const u8 *data, u32 len, u32 ofs) +{ + int out, i, j, l; + char c; + + out = snprintf(buf, count, "%08X", ofs); + + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) + out += snprintf(buf + out, count - out, "%02X ", + data[(i * 8 + j)]); + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + out += snprintf(buf + out, count - out, " "); + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) { + c = data[(i * 8 + j)]; + if (!isascii(c) || !isprint(c)) + c = '.'; + + out += snprintf(buf + out, count - out, "%c", c); + } + + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + return buf; +} + +static void printk_buf(int level, const u8 *data, u32 len) +{ + char line[81]; + u32 ofs = 0; + if (!(ipw2100_debug_level & level)) + return; + + while (len) { + printk(KERN_DEBUG "%s\n", + snprint_line(line, sizeof(line), &data[ofs], + min(len, 16U), ofs)); + ofs += 16; + len -= min(len, 16U); + } +} + + + +#define MAX_RESET_BACKOFF 10 + +static inline void schedule_reset(struct ipw2100_priv *priv) +{ + unsigned long now = get_seconds(); + + /* If we haven't received a reset request within the backoff period, + * then we can reset the backoff interval so this reset occurs + * immediately */ + if (priv->reset_backoff && + (now - priv->last_reset > priv->reset_backoff)) + priv->reset_backoff = 0; + + priv->last_reset = get_seconds(); + + if (!(priv->status & STATUS_RESET_PENDING)) { + IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n", + priv->net_dev->name, priv->reset_backoff); + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + priv->status |= STATUS_RESET_PENDING; + if (priv->reset_backoff) + queue_delayed_work(priv->workqueue, &priv->reset_work, + priv->reset_backoff * HZ); + else + queue_work(priv->workqueue, &priv->reset_work); + + if (priv->reset_backoff < MAX_RESET_BACKOFF) + priv->reset_backoff++; + + wake_up_interruptible(&priv->wait_command_queue); + } else + IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n", + priv->net_dev->name); + +} + +#define HOST_COMPLETE_TIMEOUT (2 * HZ) +static int ipw2100_hw_send_command(struct ipw2100_priv *priv, + struct host_command * cmd) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + unsigned long flags; + int err = 0; + + IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n", + command_types[cmd->host_command], cmd->host_command, + cmd->host_command_length); + printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters, + cmd->host_command_length); + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->fatal_error) { + IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n"); + err = -EIO; + goto fail_unlock; + } + + if (!(priv->status & STATUS_RUNNING)) { + IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n"); + err = -EIO; + goto fail_unlock; + } + + if (priv->status & STATUS_CMD_ACTIVE) { + IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n"); + err = -EBUSY; + goto fail_unlock; + } + + if (list_empty(&priv->msg_free_list)) { + IPW_DEBUG_INFO("no available msg buffers\n"); + goto fail_unlock; + } + + priv->status |= STATUS_CMD_ACTIVE; + priv->messages_sent++; + + element = priv->msg_free_list.next; + + packet = list_entry(element, struct ipw2100_tx_packet, list); + packet->jiffy_start = jiffies; + + /* initialize the firmware command packet */ + packet->info.c_struct.cmd->host_command_reg = cmd->host_command; + packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1; + packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length; + packet->info.c_struct.cmd->sequence = cmd->host_command_sequence; + + memcpy(packet->info.c_struct.cmd->host_command_params_reg, + cmd->host_command_parameters, + sizeof(packet->info.c_struct.cmd->host_command_params_reg)); + + list_del(element); + DEC_STAT(&priv->msg_free_stat); + + list_add_tail(element, &priv->msg_pend_list); + INC_STAT(&priv->msg_pend_stat); + + ipw2100_tx_send_commands(priv); + ipw2100_tx_send_data(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + + /* + * We must wait for this command to complete before another + * command can be sent... but if we wait more than 3 seconds + * then there is a problem. + */ + + err = wait_event_interruptible_timeout( + priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE), + HOST_COMPLETE_TIMEOUT); + + if (err == 0) { + IPW_DEBUG_INFO("Command completion failed out after %dms.\n", + HOST_COMPLETE_TIMEOUT / (HZ / 100)); + priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT; + priv->status &= ~STATUS_CMD_ACTIVE; + schedule_reset(priv); + return -EIO; + } + + if (priv->fatal_error) { + printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", + priv->net_dev->name); + return -EIO; + } + + /* !!!!! HACK TEST !!!!! + * When lots of debug trace statements are enabled, the driver + * doesn't seem to have as many firmware restart cycles... + * + * As a test, we're sticking in a 1/100s delay here */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HZ / 100); + + return 0; + + fail_unlock: + spin_unlock_irqrestore(&priv->low_lock, flags); + + return err; +} + + +/* + * Verify the values and data access of the hardware + * No locks needed or used. No functions called. + */ +static int ipw2100_verify(struct ipw2100_priv *priv) +{ + u32 data1, data2; + u32 address; + + u32 val1 = 0x76543210; + u32 val2 = 0xFEDCBA98; + + /* Domain 0 check - all values should be DOA_DEBUG */ + for (address = IPW_REG_DOA_DEBUG_AREA_START; + address < IPW_REG_DOA_DEBUG_AREA_END; + address += sizeof(u32)) { + read_register(priv->net_dev, address, &data1); + if (data1 != IPW_DATA_DOA_DEBUG_VALUE) + return -EIO; + } + + /* Domain 1 check - use arbitrary read/write compare */ + for (address = 0; address < 5; address++) { + /* The memory area is not used now */ + write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, + val1); + write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, + val2); + read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, + &data1); + read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, + &data2); + if (val1 == data1 && val2 == data2) + return 0; + } + + return -EIO; +} + +/* + * + * Loop until the CARD_DISABLED bit is the same value as the + * supplied parameter + * + * TODO: See if it would be more efficient to do a wait/wake + * cycle and have the completion event trigger the wakeup + * + */ +#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli +static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state) +{ + int i; + u32 card_state; + u32 len = sizeof(card_state); + int err; + + for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) { + err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED, + &card_state, &len); + if (err) { + IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal " + "failed.\n"); + return 0; + } + + /* We'll break out if either the HW state says it is + * in the state we want, or if HOST_COMPLETE command + * finishes */ + if ((card_state == state) || + ((priv->status & STATUS_ENABLED) ? + IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) { + if (state == IPW_HW_STATE_ENABLED) + priv->status |= STATUS_ENABLED; + else + priv->status &= ~STATUS_ENABLED; + + return 0; + } + + udelay(50); + } + + IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n", + state ? "DISABLED" : "ENABLED"); + return -EIO; +} + + +/********************************************************************* + Procedure : sw_reset_and_clock + Purpose : Asserts s/w reset, asserts clock initialization + and waits for clock stabilization + ********************************************************************/ +static int sw_reset_and_clock(struct ipw2100_priv *priv) +{ + int i; + u32 r; + + // assert s/w reset + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + // wait for clock stabilization + for (i = 0; i < 1000; i++) { + udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY); + + // check clock ready bit + read_register(priv->net_dev, IPW_REG_RESET_REG, &r); + if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET) + break; + } + + if (i == 1000) + return -EIO; // TODO: better error value + + /* set "initialization complete" bit to move adapter to + * D0 state */ + write_register(priv->net_dev, IPW_REG_GP_CNTRL, + IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE); + + /* wait for clock stabilization */ + for (i = 0; i < 10000; i++) { + udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4); + + /* check clock ready bit */ + read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); + if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY) + break; + } + + if (i == 10000) + return -EIO; /* TODO: better error value */ + + /* set D0 standby bit */ + read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); + write_register(priv->net_dev, IPW_REG_GP_CNTRL, + r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); + + return 0; +} + +/********************************************************************* + Procedure : ipw2100_download_firmware + Purpose : Initiaze adapter after power on. + The sequence is: + 1. assert s/w reset first! + 2. awake clocks & wait for clock stabilization + 3. hold ARC (don't ask me why...) + 4. load Dino ucode and reset/clock init again + 5. zero-out shared mem + 6. download f/w + *******************************************************************/ +static int ipw2100_download_firmware(struct ipw2100_priv *priv) +{ + u32 address; + int err; + +#ifndef CONFIG_PM + /* Fetch the firmware and microcode */ + struct ipw2100_fw ipw2100_firmware; +#endif + + if (priv->fatal_error) { + IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after " + "fatal error %d. Interface must be brought down.\n", + priv->net_dev->name, priv->fatal_error); + return -EINVAL; + } + +#ifdef CONFIG_PM + if (!ipw2100_firmware.version) { + err = ipw2100_get_firmware(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", + priv->net_dev->name, err); + priv->fatal_error = IPW2100_ERR_FW_LOAD; + goto fail; + } + } +#else + err = ipw2100_get_firmware(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", + priv->net_dev->name, err); + priv->fatal_error = IPW2100_ERR_FW_LOAD; + goto fail; + } +#endif + priv->firmware_version = ipw2100_firmware.version; + + /* s/w reset and clock stabilization */ + err = sw_reset_and_clock(priv); + if (err) { + IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + err = ipw2100_verify(priv); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* Hold ARC */ + write_nic_dword(priv->net_dev, + IPW_INTERNAL_REGISTER_HALT_AND_RESET, + 0x80000000); + + /* allow ARC to run */ + write_register(priv->net_dev, IPW_REG_RESET_REG, 0); + + /* load microcode */ + err = ipw2100_ucode_download(priv, &ipw2100_firmware); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* release ARC */ + write_nic_dword(priv->net_dev, + IPW_INTERNAL_REGISTER_HALT_AND_RESET, + 0x00000000); + + /* s/w reset and clock stabilization (again!!!) */ + err = sw_reset_and_clock(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: sw_reset_and_clock failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* load f/w */ + err = ipw2100_fw_download(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n", + priv->net_dev->name, err); + goto fail; + } + +#ifndef CONFIG_PM + /* + * When the .resume method of the driver is called, the other + * part of the system, i.e. the ide driver could still stay in + * the suspend stage. This prevents us from loading the firmware + * from the disk. --YZ + */ + + /* free any storage allocated for firmware image */ + ipw2100_release_firmware(priv, &ipw2100_firmware); +#endif + + /* zero out Domain 1 area indirectly (Si requirement) */ + for (address = IPW_HOST_FW_SHARED_AREA0; + address < IPW_HOST_FW_SHARED_AREA0_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA1; + address < IPW_HOST_FW_SHARED_AREA1_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA2; + address < IPW_HOST_FW_SHARED_AREA2_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA3; + address < IPW_HOST_FW_SHARED_AREA3_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_INTERRUPT_AREA; + address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + + return 0; + + fail: + ipw2100_release_firmware(priv, &ipw2100_firmware); + return err; +} + +static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv) +{ + if (priv->status & STATUS_INT_ENABLED) + return; + priv->status |= STATUS_INT_ENABLED; + write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK); +} + +static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv) +{ + if (!(priv->status & STATUS_INT_ENABLED)) + return; + priv->status &= ~STATUS_INT_ENABLED; + write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0); +} + + +static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv) +{ + struct ipw2100_ordinals *ord = &priv->ordinals; + + IPW_DEBUG_INFO("enter\n"); + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1, + &ord->table1_addr); + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2, + &ord->table2_addr); + + read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size); + read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size); + + ord->table2_size &= 0x0000FFFF; + + IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size); + IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size); + IPW_DEBUG_INFO("exit\n"); +} + +static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv) +{ + u32 reg = 0; + /* + * Set GPIO 3 writable by FW; GPIO 1 writable + * by driver and enable clock + */ + reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE | + IPW_BIT_GPIO_LED_OFF); + write_register(priv->net_dev, IPW_REG_GPIO, reg); +} + +static inline int rf_kill_active(struct ipw2100_priv *priv) +{ +#define MAX_RF_KILL_CHECKS 5 +#define RF_KILL_CHECK_DELAY 40 + + unsigned short value = 0; + u32 reg = 0; + int i; + + if (!(priv->hw_features & HW_FEATURE_RFKILL)) { + priv->status &= ~STATUS_RF_KILL_HW; + return 0; + } + + for (i = 0; i < MAX_RF_KILL_CHECKS; i++) { + udelay(RF_KILL_CHECK_DELAY); + read_register(priv->net_dev, IPW_REG_GPIO, ®); + value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1); + } + + if (value == 0) + priv->status |= STATUS_RF_KILL_HW; + else + priv->status &= ~STATUS_RF_KILL_HW; + + return (value == 0); +} + +static int ipw2100_get_hw_features(struct ipw2100_priv *priv) +{ + u32 addr, len; + u32 val; + + /* + * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1 + */ + len = sizeof(addr); + if (ipw2100_get_ordinal( + priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, + &addr, &len)) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return -EIO; + } + + IPW_DEBUG_INFO("EEPROM address: %08X\n", addr); + + /* + * EEPROM version is the byte at offset 0xfd in firmware + * We read 4 bytes, then shift out the byte we actually want */ + read_nic_dword(priv->net_dev, addr + 0xFC, &val); + priv->eeprom_version = (val >> 24) & 0xFF; + IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version); + + /* + * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware + * + * notice that the EEPROM bit is reverse polarity, i.e. + * bit = 0 signifies HW RF kill switch is supported + * bit = 1 signifies HW RF kill switch is NOT supported + */ + read_nic_dword(priv->net_dev, addr + 0x20, &val); + if (!((val >> 24) & 0x01)) + priv->hw_features |= HW_FEATURE_RFKILL; + + IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n", + (priv->hw_features & HW_FEATURE_RFKILL) ? + "" : "not "); + + return 0; +} + +/* + * Start firmware execution after power on and intialization + * The sequence is: + * 1. Release ARC + * 2. Wait for f/w initialization completes; + */ +static int ipw2100_start_adapter(struct ipw2100_priv *priv) +{ + int i; + u32 inta, inta_mask, gpio; + + IPW_DEBUG_INFO("enter\n"); + + if (priv->status & STATUS_RUNNING) + return 0; + + /* + * Initialize the hw - drive adapter to DO state by setting + * init_done bit. Wait for clk_ready bit and Download + * fw & dino ucode + */ + if (ipw2100_download_firmware(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to power on the adapter.\n", + priv->net_dev->name); + return -EIO; + } + + /* Clear the Tx, Rx and Msg queues and the r/w indexes + * in the firmware RBD and TBD ring queue */ + ipw2100_queues_initialize(priv); + + ipw2100_hw_set_gpio(priv); + + /* TODO -- Look at disabling interrupts here to make sure none + * get fired during FW initialization */ + + /* Release ARC - clear reset bit */ + write_register(priv->net_dev, IPW_REG_RESET_REG, 0); + + /* wait for f/w intialization complete */ + IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); + i = 5000; + do { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(40 * HZ / 1000); + /* Todo... wait for sync command ... */ + + read_register(priv->net_dev, IPW_REG_INTA, &inta); + + /* check "init done" bit */ + if (inta & IPW2100_INTA_FW_INIT_DONE) { + /* reset "init done" bit */ + write_register(priv->net_dev, IPW_REG_INTA, + IPW2100_INTA_FW_INIT_DONE); + break; + } + + /* check error conditions : we check these after the firmware + * check so that if there is an error, the interrupt handler + * will see it and the adapter will be reset */ + if (inta & + (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) { + /* clear error conditions */ + write_register(priv->net_dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR); + } + } while (i--); + + /* Clear out any pending INTAs since we aren't supposed to have + * interrupts enabled at this point... */ + read_register(priv->net_dev, IPW_REG_INTA, &inta); + read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); + inta &= IPW_INTERRUPT_MASK; + /* Clear out any pending interrupts */ + if (inta & inta_mask) + write_register(priv->net_dev, IPW_REG_INTA, inta); + + IPW_DEBUG_FW("f/w initialization complete: %s\n", + i ? "SUCCESS" : "FAILED"); + + if (!i) { + printk(KERN_WARNING DRV_NAME ": %s: Firmware did not initialize.\n", + priv->net_dev->name); + return -EIO; + } + + /* allow firmware to write to GPIO1 & GPIO3 */ + read_register(priv->net_dev, IPW_REG_GPIO, &gpio); + + gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK); + + write_register(priv->net_dev, IPW_REG_GPIO, gpio); + + /* Ready to receive commands */ + priv->status |= STATUS_RUNNING; + + /* The adapter has been reset; we are not associated */ + priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv) +{ + if (!priv->fatal_error) + return; + + priv->fatal_errors[priv->fatal_index++] = priv->fatal_error; + priv->fatal_index %= IPW2100_ERROR_QUEUE; + priv->fatal_error = 0; +} + + +/* NOTE: Our interrupt is disabled when this method is called */ +static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) +{ + u32 reg; + int i; + + IPW_DEBUG_INFO("Power cycling the hardware.\n"); + + ipw2100_hw_set_gpio(priv); + + /* Step 1. Stop Master Assert */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + + /* Step 2. Wait for stop Master Assert + * (not more then 50us, otherwise ret error */ + i = 5; + do { + udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } while(i--); + + priv->status &= ~STATUS_RESET_PENDING; + + if (!i) { + IPW_DEBUG_INFO("exit - waited too long for master assert stop\n"); + return -EIO; + } + + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + + /* Reset any fatal_error conditions */ + ipw2100_reset_fatalerror(priv); + + /* At this point, the adapter is now stopped and disabled */ + priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING | + STATUS_ASSOCIATED | STATUS_ENABLED); + + return 0; +} + +/* + * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it + * + * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. + * + * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of + * if STATUS_ASSN_LOST is sent. + */ +static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) +{ + +#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000) + + struct host_command cmd = { + .host_command = CARD_DISABLE_PHY_OFF, + .host_command_sequence = 0, + .host_command_length = 0, + }; + int err, i; + u32 val1, val2; + + IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n"); + + /* Turn off the radio */ + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + for (i = 0; i < 2500; i++) { + read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1); + read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2); + + if ((val1 & IPW2100_CONTROL_PHY_OFF) && + (val2 & IPW2100_COMMAND_PHY_OFF)) + return 0; + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HW_PHY_OFF_LOOP_DELAY); + } + + return -EIO; +} + + +static int ipw2100_enable_adapter(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = HOST_COMPLETE, + .host_command_sequence = 0, + .host_command_length = 0 + }; + int err = 0; + + IPW_DEBUG_HC("HOST_COMPLETE\n"); + + if (priv->status & STATUS_ENABLED) + return 0; + + down(&priv->adapter_sem); + + if (rf_kill_active(priv)) { + IPW_DEBUG_HC("Command aborted due to RF kill active.\n"); + goto fail_up; + } + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n"); + goto fail_up; + } + + err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED); + if (err) { + IPW_DEBUG_INFO( + "%s: card not responding to init command.\n", + priv->net_dev->name); + goto fail_up; + } + + if (priv->stop_hang_check) { + priv->stop_hang_check = 0; + queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2); + } + +fail_up: + up(&priv->adapter_sem); + return err; +} + +static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) +{ +#define HW_POWER_DOWN_DELAY (HZ / 10) + + struct host_command cmd = { + .host_command = HOST_PRE_POWER_DOWN, + .host_command_sequence = 0, + .host_command_length = 0, + }; + int err, i; + u32 reg; + + if (!(priv->status & STATUS_RUNNING)) + return 0; + + priv->status |= STATUS_STOPPING; + + /* We can only shut down the card if the firmware is operational. So, + * if we haven't reset since a fatal_error, then we can not send the + * shutdown commands. */ + if (!priv->fatal_error) { + /* First, make sure the adapter is enabled so that the PHY_OFF + * command can shut it down */ + ipw2100_enable_adapter(priv); + + err = ipw2100_hw_phy_off(priv); + if (err) + printk(KERN_WARNING DRV_NAME ": Error disabling radio %d\n", err); + + /* + * If in D0-standby mode going directly to D3 may cause a + * PCI bus violation. Therefore we must change out of the D0 + * state. + * + * Sending the PREPARE_FOR_POWER_DOWN will restrict the + * hardware from going into standby mode and will transition + * out of D0-standy if it is already in that state. + * + * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the + * driver upon completion. Once received, the driver can + * proceed to the D3 state. + * + * Prepare for power down command to fw. This command would + * take HW out of D0-standby and prepare it for D3 state. + * + * Currently FW does not support event notification for this + * event. Therefore, skip waiting for it. Just wait a fixed + * 100ms + */ + IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n"); + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + printk(KERN_WARNING DRV_NAME ": " + "%s: Power down command failed: Error %d\n", + priv->net_dev->name, err); + else { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HW_POWER_DOWN_DELAY); + } + } + + priv->status &= ~STATUS_ENABLED; + + /* + * Set GPIO 3 writable by FW; GPIO 1 writable + * by driver and enable clock + */ + ipw2100_hw_set_gpio(priv); + + /* + * Power down adapter. Sequence: + * 1. Stop master assert (RESET_REG[9]=1) + * 2. Wait for stop master (RESET_REG[8]==1) + * 3. S/w reset assert (RESET_REG[7] = 1) + */ + + /* Stop master assert */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + + /* wait stop master not more than 50 usec. + * Otherwise return error. */ + for (i = 5; i > 0; i--) { + udelay(10); + + /* Check master stop bit */ + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } + + if (i == 0) + printk(KERN_WARNING DRV_NAME + ": %s: Could now power down adapter.\n", + priv->net_dev->name); + + /* assert s/w reset */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING); + + return 0; +} + + +static int ipw2100_disable_adapter(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = CARD_DISABLE, + .host_command_sequence = 0, + .host_command_length = 0 + }; + int err = 0; + + IPW_DEBUG_HC("CARD_DISABLE\n"); + + if (!(priv->status & STATUS_ENABLED)) + return 0; + + /* Make sure we clear the associated state */ + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + + if (!priv->stop_hang_check) { + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + } + + down(&priv->adapter_sem); + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + printk(KERN_WARNING DRV_NAME ": exit - failed to send CARD_DISABLE command\n"); + goto fail_up; + } + + err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED); + if (err) { + printk(KERN_WARNING DRV_NAME ": exit - card failed to change to DISABLED\n"); + goto fail_up; + } + + IPW_DEBUG_INFO("TODO: implement scan state machine\n"); + +fail_up: + up(&priv->adapter_sem); + return err; +} + +static int ipw2100_set_scan_options(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = SET_SCAN_OPTIONS, + .host_command_sequence = 0, + .host_command_length = 8 + }; + int err; + + IPW_DEBUG_INFO("enter\n"); + + IPW_DEBUG_SCAN("setting scan options\n"); + + cmd.host_command_parameters[0] = 0; + + if (!(priv->config & CFG_ASSOCIATE)) + cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE; + if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled) + cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL; + if (priv->config & CFG_PASSIVE_SCAN) + cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE; + + cmd.host_command_parameters[1] = priv->channel_mask; + + err = ipw2100_hw_send_command(priv, &cmd); + + IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n", + cmd.host_command_parameters[0]); + + return err; +} + +static int ipw2100_start_scan(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = BROADCAST_SCAN, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + IPW_DEBUG_HC("START_SCAN\n"); + + cmd.host_command_parameters[0] = 0; + + /* No scanning if in monitor mode */ + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + return 1; + + if (priv->status & STATUS_SCANNING) { + IPW_DEBUG_SCAN("Scan requested while already in scan...\n"); + return 0; + } + + IPW_DEBUG_INFO("enter\n"); + + /* Not clearing here; doing so makes iwlist always return nothing... + * + * We should modify the table logic to use aging tables vs. clearing + * the table on each scan start. + */ + IPW_DEBUG_SCAN("starting scan\n"); + + priv->status |= STATUS_SCANNING; + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + priv->status &= ~STATUS_SCANNING; + + IPW_DEBUG_INFO("exit\n"); + + return err; +} + +static int ipw2100_up(struct ipw2100_priv *priv, int deferred) +{ + unsigned long flags; + int rc = 0; + u32 lock; + u32 ord_len = sizeof(lock); + + /* Quite if manually disabled. */ + if (priv->status & STATUS_RF_KILL_SW) { + IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable " + "switch\n", priv->net_dev->name); + return 0; + } + + /* If the interrupt is enabled, turn it off... */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + + /* Reset any fatal_error conditions */ + ipw2100_reset_fatalerror(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + + if (priv->status & STATUS_POWERED || + (priv->status & STATUS_RESET_PENDING)) { + /* Power cycle the card ... */ + if (ipw2100_power_cycle_adapter(priv)) { + printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + } else + priv->status |= STATUS_POWERED; + + /* Load the firmware, start the clocks, etc. */ + if (ipw2100_start_adapter(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + ipw2100_initialize_ordinals(priv); + + /* Determine capabilities of this particular HW configuration */ + if (ipw2100_get_hw_features(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + lock = LOCK_NONE; + if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + priv->status &= ~STATUS_SCANNING; + + if (rf_kill_active(priv)) { + printk(KERN_INFO "%s: Radio is disabled by RF switch.\n", + priv->net_dev->name); + + if (priv->stop_rf_kill) { + priv->stop_rf_kill = 0; + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); + } + + deferred = 1; + } + + /* Turn on the interrupt so that commands can be processed */ + ipw2100_enable_interrupts(priv); + + /* Send all of the commands that must be sent prior to + * HOST_COMPLETE */ + if (ipw2100_adapter_setup(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + if (!deferred) { + /* Enable the adapter - sends HOST_COMPLETE */ + if (ipw2100_enable_adapter(priv)) { + printk(KERN_ERR DRV_NAME ": " + "%s: failed in call to enable adapter.\n", + priv->net_dev->name); + ipw2100_hw_stop_adapter(priv); + rc = 1; + goto exit; + } + + + /* Start a scan . . . */ + ipw2100_set_scan_options(priv); + ipw2100_start_scan(priv); + } + + exit: + return rc; +} + +/* Called by register_netdev() */ +static int ipw2100_net_init(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ipw2100_up(priv, 1); +} + +static void ipw2100_down(struct ipw2100_priv *priv) +{ + unsigned long flags; + union iwreq_data wrqu = { + .ap_addr = { + .sa_family = ARPHRD_ETHER + } + }; + int associated = priv->status & STATUS_ASSOCIATED; + + /* Kill the RF switch timer */ + if (!priv->stop_rf_kill) { + priv->stop_rf_kill = 1; + cancel_delayed_work(&priv->rf_kill); + } + + /* Kill the firmare hang check timer */ + if (!priv->stop_hang_check) { + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + } + + /* Kill any pending resets */ + if (priv->status & STATUS_RESET_PENDING) + cancel_delayed_work(&priv->reset_work); + + /* Make sure the interrupt is on so that FW commands will be + * processed correctly */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_enable_interrupts(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + + if (ipw2100_hw_stop_adapter(priv)) + printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", + priv->net_dev->name); + + /* Do not disable the interrupt until _after_ we disable + * the adaptor. Otherwise the CARD_DISABLE command will never + * be ack'd by the firmware */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + if (priv->config & CFG_C3_DISABLED) { + IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n"); + acpi_set_cstate_limit(priv->cstate_limit); + priv->config &= ~CFG_C3_DISABLED; + } +#endif + + /* We have to signal any supplicant if we are disassociating */ + if (associated) + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); + + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); +} + +static void ipw2100_reset_adapter(struct ipw2100_priv *priv) +{ + unsigned long flags; + union iwreq_data wrqu = { + .ap_addr = { + .sa_family = ARPHRD_ETHER + } + }; + int associated = priv->status & STATUS_ASSOCIATED; + + spin_lock_irqsave(&priv->low_lock, flags); + IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n", + priv->net_dev->name); + priv->resets++; + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + priv->status |= STATUS_SECURITY_UPDATED; + + /* Force a power cycle even if interface hasn't been opened + * yet */ + cancel_delayed_work(&priv->reset_work); + priv->status |= STATUS_RESET_PENDING; + spin_unlock_irqrestore(&priv->low_lock, flags); + + down(&priv->action_sem); + /* stop timed checks so that they don't interfere with reset */ + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + + /* We have to signal any supplicant if we are disassociating */ + if (associated) + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); + + ipw2100_up(priv, 0); + up(&priv->action_sem); + +} + + +static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) +{ + +#define MAC_ASSOCIATION_READ_DELAY (HZ) + int ret, len, essid_len; + char essid[IW_ESSID_MAX_SIZE]; + u32 txrate; + u32 chan; + char *txratename; + u8 bssid[ETH_ALEN]; + + /* + * TBD: BSSID is usually 00:00:00:00:00:00 here and not + * an actual MAC of the AP. Seems like FW sets this + * address too late. Read it later and expose through + * /proc or schedule a later task to query and update + */ + + essid_len = IW_ESSID_MAX_SIZE; + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, + essid, &essid_len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + + len = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, + &txrate, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + + len = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + len = ETH_ALEN; + ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + memcpy(priv->ieee->bssid, bssid, ETH_ALEN); + + + switch (txrate) { + case TX_RATE_1_MBIT: + txratename = "1Mbps"; + break; + case TX_RATE_2_MBIT: + txratename = "2Mbsp"; + break; + case TX_RATE_5_5_MBIT: + txratename = "5.5Mbps"; + break; + case TX_RATE_11_MBIT: + txratename = "11Mbps"; + break; + default: + IPW_DEBUG_INFO("Unknown rate: %d\n", txrate); + txratename = "unknown rate"; + break; + } + + IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=" + MAC_FMT ")\n", + priv->net_dev->name, escape_essid(essid, essid_len), + txratename, chan, MAC_ARG(bssid)); + + /* now we copy read ssid into dev */ + if (!(priv->config & CFG_STATIC_ESSID)) { + priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE); + memcpy(priv->essid, essid, priv->essid_len); + } + priv->channel = chan; + memcpy(priv->bssid, bssid, ETH_ALEN); + + priv->status |= STATUS_ASSOCIATING; + priv->connect_start = get_seconds(); + + queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10); +} + + +static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid, + int length, int batch_mode) +{ + int ssid_len = min(length, IW_ESSID_MAX_SIZE); + struct host_command cmd = { + .host_command = SSID, + .host_command_sequence = 0, + .host_command_length = ssid_len + }; + int err; + + IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len)); + + if (ssid_len) + memcpy((char*)cmd.host_command_parameters, + essid, ssid_len); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to + * disable auto association -- so we cheat by setting a bogus SSID */ + if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) { + int i; + u8 *bogus = (u8*)cmd.host_command_parameters; + for (i = 0; i < IW_ESSID_MAX_SIZE; i++) + bogus[i] = 0x18 + i; + cmd.host_command_length = IW_ESSID_MAX_SIZE; + } + + /* NOTE: We always send the SSID command even if the provided ESSID is + * the same as what we currently think is set. */ + + err = ipw2100_hw_send_command(priv, &cmd); + if (!err) { + memset(priv->essid + ssid_len, 0, + IW_ESSID_MAX_SIZE - ssid_len); + memcpy(priv->essid, essid, ssid_len); + priv->essid_len = ssid_len; + } + + if (!batch_mode) { + if (ipw2100_enable_adapter(priv)) + err = -EIO; + } + + return err; +} + +static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC, + "disassociated: '%s' " MAC_FMT " \n", + escape_essid(priv->essid, priv->essid_len), + MAC_ARG(priv->bssid)); + + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + + if (priv->status & STATUS_STOPPING) { + IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n"); + return; + } + + memset(priv->bssid, 0, ETH_ALEN); + memset(priv->ieee->bssid, 0, ETH_ALEN); + + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + + if (!(priv->status & STATUS_RUNNING)) + return; + + if (priv->status & STATUS_SECURITY_UPDATED) + queue_work(priv->workqueue, &priv->security_work); + + queue_work(priv->workqueue, &priv->wx_event_work); +} + +static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n", + priv->net_dev->name); + + /* RF_KILL is now enabled (else we wouldn't be here) */ + priv->status |= STATUS_RF_KILL_HW; + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + if (priv->config & CFG_C3_DISABLED) { + IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n"); + acpi_set_cstate_limit(priv->cstate_limit); + priv->config &= ~CFG_C3_DISABLED; + } +#endif + + /* Make sure the RF Kill check timer is running */ + priv->stop_rf_kill = 0; + cancel_delayed_work(&priv->rf_kill); + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); +} + +static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_SCAN("scan complete\n"); + /* Age the scan results... */ + priv->ieee->scans++; + priv->status &= ~STATUS_SCANNING; +} + +#ifdef CONFIG_IPW_DEBUG +#define IPW2100_HANDLER(v, f) { v, f, # v } +struct ipw2100_status_indicator { + int status; + void (*cb)(struct ipw2100_priv *priv, u32 status); + char *name; +}; +#else +#define IPW2100_HANDLER(v, f) { v, f } +struct ipw2100_status_indicator { + int status; + void (*cb)(struct ipw2100_priv *priv, u32 status); +}; +#endif /* CONFIG_IPW_DEBUG */ + +static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_SCAN("Scanning...\n"); + priv->status |= STATUS_SCANNING; +} + +static const struct ipw2100_status_indicator status_handlers[] = { + IPW2100_HANDLER(IPW_STATE_INITIALIZED, 0), + IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, 0), + IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated), + IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost), + IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, 0), + IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete), + IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, 0), + IPW2100_HANDLER(IPW_STATE_LEFT_PSP, 0), + IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill), + IPW2100_HANDLER(IPW_STATE_DISABLED, 0), + IPW2100_HANDLER(IPW_STATE_POWER_DOWN, 0), + IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning), + IPW2100_HANDLER(-1, 0) +}; + + +static void isr_status_change(struct ipw2100_priv *priv, int status) +{ + int i; + + if (status == IPW_STATE_SCANNING && + priv->status & STATUS_ASSOCIATED && + !(priv->status & STATUS_SCANNING)) { + IPW_DEBUG_INFO("Scan detected while associated, with " + "no scan request. Restarting firmware.\n"); + + /* Wake up any sleeping jobs */ + schedule_reset(priv); + } + + for (i = 0; status_handlers[i].status != -1; i++) { + if (status == status_handlers[i].status) { + IPW_DEBUG_NOTIF("Status change: %s\n", + status_handlers[i].name); + if (status_handlers[i].cb) + status_handlers[i].cb(priv, status); + priv->wstats.status = status; + return; + } + } + + IPW_DEBUG_NOTIF("unknown status received: %04x\n", status); +} + +static void isr_rx_complete_command( + struct ipw2100_priv *priv, + struct ipw2100_cmd_header *cmd) +{ +#ifdef CONFIG_IPW_DEBUG + if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { + IPW_DEBUG_HC("Command completed '%s (%d)'\n", + command_types[cmd->host_command_reg], + cmd->host_command_reg); + } +#endif + if (cmd->host_command_reg == HOST_COMPLETE) + priv->status |= STATUS_ENABLED; + + if (cmd->host_command_reg == CARD_DISABLE) + priv->status &= ~STATUS_ENABLED; + + priv->status &= ~STATUS_CMD_ACTIVE; + + wake_up_interruptible(&priv->wait_command_queue); +} + +#ifdef CONFIG_IPW_DEBUG +static const char *frame_types[] = { + "COMMAND_STATUS_VAL", + "STATUS_CHANGE_VAL", + "P80211_DATA_VAL", + "P8023_DATA_VAL", + "HOST_NOTIFICATION_VAL" +}; +#endif + + +static inline int ipw2100_alloc_skb( + struct ipw2100_priv *priv, + struct ipw2100_rx_packet *packet) +{ + packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx)); + if (!packet->skb) + return -ENOMEM; + + packet->rxp = (struct ipw2100_rx *)packet->skb->data; + packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + /* NOTE: pci_map_single does not return an error code, and 0 is a valid + * dma_addr */ + + return 0; +} + + +#define SEARCH_ERROR 0xffffffff +#define SEARCH_FAIL 0xfffffffe +#define SEARCH_SUCCESS 0xfffffff0 +#define SEARCH_DISCARD 0 +#define SEARCH_SNAPSHOT 1 + +#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff)) +static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv) +{ + int i; + if (priv->snapshot[0]) + return 1; + for (i = 0; i < 0x30; i++) { + priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC); + if (!priv->snapshot[i]) { + IPW_DEBUG_INFO("%s: Error allocating snapshot " + "buffer %d\n", priv->net_dev->name, i); + while (i > 0) + kfree(priv->snapshot[--i]); + priv->snapshot[0] = NULL; + return 0; + } + } + + return 1; +} + +static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv) +{ + int i; + if (!priv->snapshot[0]) + return; + for (i = 0; i < 0x30; i++) + kfree(priv->snapshot[i]); + priv->snapshot[0] = NULL; +} + +static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf, + size_t len, int mode) +{ + u32 i, j; + u32 tmp; + u8 *s, *d; + u32 ret; + + s = in_buf; + if (mode == SEARCH_SNAPSHOT) { + if (!ipw2100_snapshot_alloc(priv)) + mode = SEARCH_DISCARD; + } + + for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) { + read_nic_dword(priv->net_dev, i, &tmp); + if (mode == SEARCH_SNAPSHOT) + *(u32 *)SNAPSHOT_ADDR(i) = tmp; + if (ret == SEARCH_FAIL) { + d = (u8*)&tmp; + for (j = 0; j < 4; j++) { + if (*s != *d) { + s = in_buf; + continue; + } + + s++; + d++; + + if ((s - in_buf) == len) + ret = (i + j) - len + 1; + } + } else if (mode == SEARCH_DISCARD) + return ret; + } + + return ret; +} + +/* + * + * 0) Disconnect the SKB from the firmware (just unmap) + * 1) Pack the ETH header into the SKB + * 2) Pass the SKB to the network stack + * + * When packet is provided by the firmware, it contains the following: + * + * . ieee80211_hdr + * . ieee80211_snap_hdr + * + * The size of the constructed ethernet + * + */ +#ifdef CONFIG_IPW2100_RX_DEBUG +static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; +#endif + +static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, + int i) +{ +#ifdef CONFIG_IPW_DEBUG_C3 + struct ipw2100_status *status = &priv->status_queue.drv[i]; + u32 match, reg; + int j; +#endif +#ifdef ACPI_CSTATE_LIMIT_DEFINED + int limit; +#endif + + IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at " + "0x%04zX.\n", i * sizeof(struct ipw2100_status)); + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n"); + limit = acpi_get_cstate_limit(); + if (limit > 2) { + priv->cstate_limit = limit; + acpi_set_cstate_limit(2); + priv->config |= CFG_C3_DISABLED; + } +#endif + +#ifdef CONFIG_IPW_DEBUG_C3 + /* Halt the fimrware so we can get a good image */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + j = 5; + do { + udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } while (j--); + + match = ipw2100_match_buf(priv, (u8*)status, + sizeof(struct ipw2100_status), + SEARCH_SNAPSHOT); + if (match < SEARCH_SUCCESS) + IPW_DEBUG_INFO("%s: DMA status match in Firmware at " + "offset 0x%06X, length %d:\n", + priv->net_dev->name, match, + sizeof(struct ipw2100_status)); + else + IPW_DEBUG_INFO("%s: No DMA status match in " + "Firmware.\n", priv->net_dev->name); + + printk_buf((u8*)priv->status_queue.drv, + sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH); +#endif + + priv->fatal_error = IPW2100_ERR_C3_CORRUPTION; + priv->ieee->stats.rx_errors++; + schedule_reset(priv); +} + +static inline void isr_rx(struct ipw2100_priv *priv, int i, + struct ieee80211_rx_stats *stats) +{ + struct ipw2100_status *status = &priv->status_queue.drv[i]; + struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; + + IPW_DEBUG_RX("Handler...\n"); + + if (unlikely(status->frame_size > skb_tailroom(packet->skb))) { + IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" + " Dropping.\n", + priv->net_dev->name, + status->frame_size, skb_tailroom(packet->skb)); + priv->ieee->stats.rx_errors++; + return; + } + + if (unlikely(!netif_running(priv->net_dev))) { + priv->ieee->stats.rx_errors++; + priv->wstats.discard.misc++; + IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); + return; + } + + if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR && + status->flags & IPW_STATUS_FLAG_CRC_ERROR)) { + IPW_DEBUG_RX("CRC error in packet. Dropping.\n"); + priv->ieee->stats.rx_errors++; + return; + } + + if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR && + !(priv->status & STATUS_ASSOCIATED))) { + IPW_DEBUG_DROP("Dropping packet while not associated.\n"); + priv->wstats.discard.misc++; + return; + } + + + pci_unmap_single(priv->pci_dev, + packet->dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + + skb_put(packet->skb, status->frame_size); + +#ifdef CONFIG_IPW2100_RX_DEBUG + /* Make a copy of the frame so we can dump it to the logs if + * ieee80211_rx fails */ + memcpy(packet_data, packet->skb->data, + min_t(u32, status->frame_size, IPW_RX_NIC_BUFFER_LENGTH)); +#endif + + if (!ieee80211_rx(priv->ieee, packet->skb, stats)) { +#ifdef CONFIG_IPW2100_RX_DEBUG + IPW_DEBUG_DROP("%s: Non consumed packet:\n", + priv->net_dev->name); + printk_buf(IPW_DL_DROP, packet_data, status->frame_size); +#endif + priv->ieee->stats.rx_errors++; + + /* ieee80211_rx failed, so it didn't free the SKB */ + dev_kfree_skb_any(packet->skb); + packet->skb = NULL; + } + + /* We need to allocate a new SKB and attach it to the RDB. */ + if (unlikely(ipw2100_alloc_skb(priv, packet))) { + printk(KERN_WARNING DRV_NAME ": " + "%s: Unable to allocate SKB onto RBD ring - disabling " + "adapter.\n", priv->net_dev->name); + /* TODO: schedule adapter shutdown */ + IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); + } + + /* Update the RDB entry */ + priv->rx_queue.drv[i].host_addr = packet->dma_addr; +} + +static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i) +{ + struct ipw2100_status *status = &priv->status_queue.drv[i]; + struct ipw2100_rx *u = priv->rx_buffers[i].rxp; + u16 frame_type = status->status_fields & STATUS_TYPE_MASK; + + switch (frame_type) { + case COMMAND_STATUS_VAL: + return (status->frame_size != sizeof(u->rx_data.command)); + case STATUS_CHANGE_VAL: + return (status->frame_size != sizeof(u->rx_data.status)); + case HOST_NOTIFICATION_VAL: + return (status->frame_size < sizeof(u->rx_data.notification)); + case P80211_DATA_VAL: + case P8023_DATA_VAL: +#ifdef CONFIG_IPW2100_MONITOR + return 0; +#else + switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) { + case IEEE80211_FTYPE_MGMT: + case IEEE80211_FTYPE_CTL: + return 0; + case IEEE80211_FTYPE_DATA: + return (status->frame_size > + IPW_MAX_802_11_PAYLOAD_LENGTH); + } +#endif + } + + return 1; +} + +/* + * ipw2100 interrupts are disabled at this point, and the ISR + * is the only code that calls this method. So, we do not need + * to play with any locks. + * + * RX Queue works as follows: + * + * Read index - firmware places packet in entry identified by the + * Read index and advances Read index. In this manner, + * Read index will always point to the next packet to + * be filled--but not yet valid. + * + * Write index - driver fills this entry with an unused RBD entry. + * This entry has not filled by the firmware yet. + * + * In between the W and R indexes are the RBDs that have been received + * but not yet processed. + * + * The process of handling packets will start at WRITE + 1 and advance + * until it reaches the READ index. + * + * The WRITE index is cached in the variable 'priv->rx_queue.next'. + * + */ +static inline void __ipw2100_rx_process(struct ipw2100_priv *priv) +{ + struct ipw2100_bd_queue *rxq = &priv->rx_queue; + struct ipw2100_status_queue *sq = &priv->status_queue; + struct ipw2100_rx_packet *packet; + u16 frame_type; + u32 r, w, i, s; + struct ipw2100_rx *u; + struct ieee80211_rx_stats stats = { + .mac_time = jiffies, + }; + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r); + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w); + + if (r >= rxq->entries) { + IPW_DEBUG_RX("exit - bad read index\n"); + return; + } + + i = (rxq->next + 1) % rxq->entries; + s = i; + while (i != r) { + /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n", + r, rxq->next, i); */ + + packet = &priv->rx_buffers[i]; + + /* Sync the DMA for the STATUS buffer so CPU is sure to get + * the correct values */ + pci_dma_sync_single_for_cpu( + priv->pci_dev, + sq->nic + sizeof(struct ipw2100_status) * i, + sizeof(struct ipw2100_status), + PCI_DMA_FROMDEVICE); + + /* Sync the DMA for the RX buffer so CPU is sure to get + * the correct values */ + pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + + if (unlikely(ipw2100_corruption_check(priv, i))) { + ipw2100_corruption_detected(priv, i); + goto increment; + } + + u = packet->rxp; + frame_type = sq->drv[i].status_fields & + STATUS_TYPE_MASK; + stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM; + stats.len = sq->drv[i].frame_size; + + stats.mask = 0; + if (stats.rssi != 0) + stats.mask |= IEEE80211_STATMASK_RSSI; + stats.freq = IEEE80211_24GHZ_BAND; + + IPW_DEBUG_RX( + "%s: '%s' frame type received (%d).\n", + priv->net_dev->name, frame_types[frame_type], + stats.len); + + switch (frame_type) { + case COMMAND_STATUS_VAL: + /* Reset Rx watchdog */ + isr_rx_complete_command( + priv, &u->rx_data.command); + break; + + case STATUS_CHANGE_VAL: + isr_status_change(priv, u->rx_data.status); + break; + + case P80211_DATA_VAL: + case P8023_DATA_VAL: +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + isr_rx(priv, i, &stats); + break; + } +#endif + if (stats.len < sizeof(u->rx_data.header)) + break; + switch (WLAN_FC_GET_TYPE(u->rx_data.header. + frame_ctl)) { + case IEEE80211_FTYPE_MGMT: + ieee80211_rx_mgt(priv->ieee, + &u->rx_data.header, + &stats); + break; + + case IEEE80211_FTYPE_CTL: + break; + + case IEEE80211_FTYPE_DATA: + isr_rx(priv, i, &stats); + break; + + } + break; + } + + increment: + /* clear status field associated with this RBD */ + rxq->drv[i].status.info.field = 0; + + i = (i + 1) % rxq->entries; + } + + if (i != s) { + /* backtrack one entry, wrapping to end if at 0 */ + rxq->next = (i ? i : rxq->entries) - 1; + + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, + rxq->next); + } +} + + +/* + * __ipw2100_tx_process + * + * This routine will determine whether the next packet on + * the fw_pend_list has been processed by the firmware yet. + * + * If not, then it does nothing and returns. + * + * If so, then it removes the item from the fw_pend_list, frees + * any associated storage, and places the item back on the + * free list of its source (either msg_free_list or tx_free_list) + * + * TX Queue works as follows: + * + * Read index - points to the next TBD that the firmware will + * process. The firmware will read the data, and once + * done processing, it will advance the Read index. + * + * Write index - driver fills this entry with an constructed TBD + * entry. The Write index is not advanced until the + * packet has been configured. + * + * In between the W and R indexes are the TBDs that have NOT been + * processed. Lagging behind the R index are packets that have + * been processed but have not been freed by the driver. + * + * In order to free old storage, an internal index will be maintained + * that points to the next packet to be freed. When all used + * packets have been freed, the oldest index will be the same as the + * firmware's read index. + * + * The OLDEST index is cached in the variable 'priv->tx_queue.oldest' + * + * Because the TBD structure can not contain arbitrary data, the + * driver must keep an internal queue of cached allocations such that + * it can put that data back into the tx_free_list and msg_free_list + * for use by future command and data packets. + * + */ +static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) +{ + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + struct list_head *element; + struct ipw2100_tx_packet *packet; + int descriptors_used; + int e, i; + u32 r, w, frag_num = 0; + + if (list_empty(&priv->fw_pend_list)) + return 0; + + element = priv->fw_pend_list.next; + + packet = list_entry(element, struct ipw2100_tx_packet, list); + tbd = &txq->drv[packet->index]; + + /* Determine how many TBD entries must be finished... */ + switch (packet->type) { + case COMMAND: + /* COMMAND uses only one slot; don't advance */ + descriptors_used = 1; + e = txq->oldest; + break; + + case DATA: + /* DATA uses two slots; advance and loop position. */ + descriptors_used = tbd->num_fragments; + frag_num = tbd->num_fragments - 1; + e = txq->oldest + frag_num; + e %= txq->entries; + break; + + default: + printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", + priv->net_dev->name); + return 0; + } + + /* if the last TBD is not done by NIC yet, then packet is + * not ready to be released. + * + */ + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, + &r); + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + &w); + if (w != txq->next) + printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", + priv->net_dev->name); + + /* + * txq->next is the index of the last packet written txq->oldest is + * the index of the r is the index of the next packet to be read by + * firmware + */ + + + /* + * Quick graphic to help you visualize the following + * if / else statement + * + * ===>| s---->|=============== + * e>| + * | a | b | c | d | e | f | g | h | i | j | k | l + * r---->| + * w + * + * w - updated by driver + * r - updated by firmware + * s - start of oldest BD entry (txq->oldest) + * e - end of oldest BD entry + * + */ + if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) { + IPW_DEBUG_TX("exit - no processed packets ready to release.\n"); + return 0; + } + + list_del(element); + DEC_STAT(&priv->fw_pend_stat); + +#ifdef CONFIG_IPW_DEBUG + { + int i = txq->oldest; + IPW_DEBUG_TX( + "TX%d V=%p P=%04X T=%04X L=%d\n", i, + &txq->drv[i], + (u32)(txq->nic + i * sizeof(struct ipw2100_bd)), + txq->drv[i].host_addr, + txq->drv[i].buf_length); + + if (packet->type == DATA) { + i = (i + 1) % txq->entries; + + IPW_DEBUG_TX( + "TX%d V=%p P=%04X T=%04X L=%d\n", i, + &txq->drv[i], + (u32)(txq->nic + i * + sizeof(struct ipw2100_bd)), + (u32)txq->drv[i].host_addr, + txq->drv[i].buf_length); + } + } +#endif + + switch (packet->type) { + case DATA: + if (txq->drv[txq->oldest].status.info.fields.txType != 0) + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " + "Expecting DATA TBD but pulled " + "something else: ids %d=%d.\n", + priv->net_dev->name, txq->oldest, packet->index); + + /* DATA packet; we have to unmap and free the SKB */ + priv->ieee->stats.tx_packets++; + for (i = 0; i < frag_num; i++) { + tbd = &txq->drv[(packet->index + 1 + i) % + txq->entries]; + + IPW_DEBUG_TX( + "TX%d P=%08x L=%d\n", + (packet->index + 1 + i) % txq->entries, + tbd->host_addr, tbd->buf_length); + + pci_unmap_single(priv->pci_dev, + tbd->host_addr, + tbd->buf_length, + PCI_DMA_TODEVICE); + } + + priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size; + ieee80211_txb_free(packet->info.d_struct.txb); + packet->info.d_struct.txb = NULL; + + list_add_tail(element, &priv->tx_free_list); + INC_STAT(&priv->tx_free_stat); + + /* We have a free slot in the Tx queue, so wake up the + * transmit layer if it is stopped. */ + if (priv->status & STATUS_ASSOCIATED && + netif_queue_stopped(priv->net_dev)) { + IPW_DEBUG_INFO(KERN_INFO + "%s: Waking net queue.\n", + priv->net_dev->name); + netif_wake_queue(priv->net_dev); + } + + /* A packet was processed by the hardware, so update the + * watchdog */ + priv->net_dev->trans_start = jiffies; + + break; + + case COMMAND: + if (txq->drv[txq->oldest].status.info.fields.txType != 1) + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " + "Expecting COMMAND TBD but pulled " + "something else: ids %d=%d.\n", + priv->net_dev->name, txq->oldest, packet->index); + +#ifdef CONFIG_IPW_DEBUG + if (packet->info.c_struct.cmd->host_command_reg < + sizeof(command_types) / sizeof(*command_types)) + IPW_DEBUG_TX( + "Command '%s (%d)' processed: %d.\n", + command_types[packet->info.c_struct.cmd->host_command_reg], + packet->info.c_struct.cmd->host_command_reg, + packet->info.c_struct.cmd->cmd_status_reg); +#endif + + list_add_tail(element, &priv->msg_free_list); + INC_STAT(&priv->msg_free_stat); + break; + } + + /* advance oldest used TBD pointer to start of next entry */ + txq->oldest = (e + 1) % txq->entries; + /* increase available TBDs number */ + txq->available += descriptors_used; + SET_STAT(&priv->txq_stat, txq->available); + + IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n", + jiffies - packet->jiffy_start); + + return (!list_empty(&priv->fw_pend_list)); +} + + +static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv) +{ + int i = 0; + + while (__ipw2100_tx_process(priv) && i < 200) i++; + + if (i == 200) { + printk(KERN_WARNING DRV_NAME ": " + "%s: Driver is running slow (%d iters).\n", + priv->net_dev->name, i); + } +} + + +static void ipw2100_tx_send_commands(struct ipw2100_priv *priv) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + int next = txq->next; + + while (!list_empty(&priv->msg_pend_list)) { + /* if there isn't enough space in TBD queue, then + * don't stuff a new one in. + * NOTE: 3 are needed as a command will take one, + * and there is a minimum of 2 that must be + * maintained between the r and w indexes + */ + if (txq->available <= 3) { + IPW_DEBUG_TX("no room in tx_queue\n"); + break; + } + + element = priv->msg_pend_list.next; + list_del(element); + DEC_STAT(&priv->msg_pend_stat); + + packet = list_entry(element, + struct ipw2100_tx_packet, list); + + IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n", + &txq->drv[txq->next], + (void*)(txq->nic + txq->next * + sizeof(struct ipw2100_bd))); + + packet->index = txq->next; + + tbd = &txq->drv[txq->next]; + + /* initialize TBD */ + tbd->host_addr = packet->info.c_struct.cmd_phys; + tbd->buf_length = sizeof(struct ipw2100_cmd_header); + /* not marking number of fragments causes problems + * with f/w debug version */ + tbd->num_fragments = 1; + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_COMMAND | + IPW_BD_STATUS_TX_INTERRUPT_ENABLE; + + /* update TBD queue counters */ + txq->next++; + txq->next %= txq->entries; + txq->available--; + DEC_STAT(&priv->txq_stat); + + list_add_tail(element, &priv->fw_pend_list); + INC_STAT(&priv->fw_pend_stat); + } + + if (txq->next != next) { + /* kick off the DMA by notifying firmware the + * write index has moved; make sure TBD stores are sync'd */ + wmb(); + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + txq->next); + } +} + + +/* + * ipw2100_tx_send_data + * + */ +static void ipw2100_tx_send_data(struct ipw2100_priv *priv) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + int next = txq->next; + int i = 0; + struct ipw2100_data_header *ipw_hdr; + struct ieee80211_hdr *hdr; + + while (!list_empty(&priv->tx_pend_list)) { + /* if there isn't enough space in TBD queue, then + * don't stuff a new one in. + * NOTE: 4 are needed as a data will take two, + * and there is a minimum of 2 that must be + * maintained between the r and w indexes + */ + element = priv->tx_pend_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + if (unlikely(1 + packet->info.d_struct.txb->nr_frags > + IPW_MAX_BDS)) { + /* TODO: Support merging buffers if more than + * IPW_MAX_BDS are used */ + IPW_DEBUG_INFO( + "%s: Maximum BD theshold exceeded. " + "Increase fragmentation level.\n", + priv->net_dev->name); + } + + if (txq->available <= 3 + + packet->info.d_struct.txb->nr_frags) { + IPW_DEBUG_TX("no room in tx_queue\n"); + break; + } + + list_del(element); + DEC_STAT(&priv->tx_pend_stat); + + tbd = &txq->drv[txq->next]; + + packet->index = txq->next; + + ipw_hdr = packet->info.d_struct.data; + hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb-> + fragments[0]->data; + + if (priv->ieee->iw_mode == IW_MODE_INFRA) { + /* To DS: Addr1 = BSSID, Addr2 = SA, + Addr3 = DA */ + memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); + memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN); + } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + /* not From/To DS: Addr1 = DA, Addr2 = SA, + Addr3 = BSSID */ + memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); + memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN); + } + + ipw_hdr->host_command_reg = SEND; + ipw_hdr->host_command_reg1 = 0; + + /* For now we only support host based encryption */ + ipw_hdr->needs_encryption = 0; + ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted; + if (packet->info.d_struct.txb->nr_frags > 1) + ipw_hdr->fragment_size = + packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN; + else + ipw_hdr->fragment_size = 0; + + tbd->host_addr = packet->info.d_struct.data_phys; + tbd->buf_length = sizeof(struct ipw2100_data_header); + tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags; + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; + txq->next++; + txq->next %= txq->entries; + + IPW_DEBUG_TX( + "data header tbd TX%d P=%08x L=%d\n", + packet->index, tbd->host_addr, + tbd->buf_length); +#ifdef CONFIG_IPW_DEBUG + if (packet->info.d_struct.txb->nr_frags > 1) + IPW_DEBUG_FRAG("fragment Tx: %d frames\n", + packet->info.d_struct.txb->nr_frags); +#endif + + for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) { + tbd = &txq->drv[txq->next]; + if (i == packet->info.d_struct.txb->nr_frags - 1) + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_INTERRUPT_ENABLE; + else + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; + + tbd->buf_length = packet->info.d_struct.txb-> + fragments[i]->len - IEEE80211_3ADDR_LEN; + + tbd->host_addr = pci_map_single( + priv->pci_dev, + packet->info.d_struct.txb->fragments[i]->data + + IEEE80211_3ADDR_LEN, + tbd->buf_length, + PCI_DMA_TODEVICE); + + IPW_DEBUG_TX( + "data frag tbd TX%d P=%08x L=%d\n", + txq->next, tbd->host_addr, tbd->buf_length); + + pci_dma_sync_single_for_device( + priv->pci_dev, tbd->host_addr, + tbd->buf_length, + PCI_DMA_TODEVICE); + + txq->next++; + txq->next %= txq->entries; + } + + txq->available -= 1 + packet->info.d_struct.txb->nr_frags; + SET_STAT(&priv->txq_stat, txq->available); + + list_add_tail(element, &priv->fw_pend_list); + INC_STAT(&priv->fw_pend_stat); + } + + if (txq->next != next) { + /* kick off the DMA by notifying firmware the + * write index has moved; make sure TBD stores are sync'd */ + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + txq->next); + } + return; +} + +static void ipw2100_irq_tasklet(struct ipw2100_priv *priv) +{ + struct net_device *dev = priv->net_dev; + unsigned long flags; + u32 inta, tmp; + + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + + read_register(dev, IPW_REG_INTA, &inta); + + IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n", + (unsigned long)inta & IPW_INTERRUPT_MASK); + + priv->in_isr++; + priv->interrupts++; + + /* We do not loop and keep polling for more interrupts as this + * is frowned upon and doesn't play nicely with other potentially + * chained IRQs */ + IPW_DEBUG_ISR("INTA: 0x%08lX\n", + (unsigned long)inta & IPW_INTERRUPT_MASK); + + if (inta & IPW2100_INTA_FATAL_ERROR) { + printk(KERN_WARNING DRV_NAME + ": Fatal interrupt. Scheduling firmware restart.\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR); + + read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error); + IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n", + priv->net_dev->name, priv->fatal_error); + + read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp); + IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n", + priv->net_dev->name, tmp); + + /* Wake up any sleeping jobs */ + schedule_reset(priv); + } + + if (inta & IPW2100_INTA_PARITY_ERROR) { + printk(KERN_ERR DRV_NAME ": ***** PARITY ERROR INTERRUPT !!!! \n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_PARITY_ERROR); + } + + if (inta & IPW2100_INTA_RX_TRANSFER) { + IPW_DEBUG_ISR("RX interrupt\n"); + + priv->rx_interrupts++; + + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_RX_TRANSFER); + + __ipw2100_rx_process(priv); + __ipw2100_tx_complete(priv); + } + + if (inta & IPW2100_INTA_TX_TRANSFER) { + IPW_DEBUG_ISR("TX interrupt\n"); + + priv->tx_interrupts++; + + write_register(dev, IPW_REG_INTA, + IPW2100_INTA_TX_TRANSFER); + + __ipw2100_tx_complete(priv); + ipw2100_tx_send_commands(priv); + ipw2100_tx_send_data(priv); + } + + if (inta & IPW2100_INTA_TX_COMPLETE) { + IPW_DEBUG_ISR("TX complete\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_TX_COMPLETE); + + __ipw2100_tx_complete(priv); + } + + if (inta & IPW2100_INTA_EVENT_INTERRUPT) { + /* ipw2100_handle_event(dev); */ + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_EVENT_INTERRUPT); + } + + if (inta & IPW2100_INTA_FW_INIT_DONE) { + IPW_DEBUG_ISR("FW init done interrupt\n"); + priv->inta_other++; + + read_register(dev, IPW_REG_INTA, &tmp); + if (tmp & (IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR)) { + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR); + } + + write_register(dev, IPW_REG_INTA, + IPW2100_INTA_FW_INIT_DONE); + } + + if (inta & IPW2100_INTA_STATUS_CHANGE) { + IPW_DEBUG_ISR("Status change interrupt\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_STATUS_CHANGE); + } + + if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) { + IPW_DEBUG_ISR("slave host mode interrupt\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE); + } + + priv->in_isr--; + ipw2100_enable_interrupts(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + + IPW_DEBUG_ISR("exit\n"); +} + + +static irqreturn_t ipw2100_interrupt(int irq, void *data, + struct pt_regs *regs) +{ + struct ipw2100_priv *priv = data; + u32 inta, inta_mask; + + if (!data) + return IRQ_NONE; + + spin_lock(&priv->low_lock); + + /* We check to see if we should be ignoring interrupts before + * we touch the hardware. During ucode load if we try and handle + * an interrupt we can cause keyboard problems as well as cause + * the ucode to fail to initialize */ + if (!(priv->status & STATUS_INT_ENABLED)) { + /* Shared IRQ */ + goto none; + } + + read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); + read_register(priv->net_dev, IPW_REG_INTA, &inta); + + if (inta == 0xFFFFFFFF) { + /* Hardware disappeared */ + printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); + goto none; + } + + inta &= IPW_INTERRUPT_MASK; + + if (!(inta & inta_mask)) { + /* Shared interrupt */ + goto none; + } + + /* We disable the hardware interrupt here just to prevent unneeded + * calls to be made. We disable this again within the actual + * work tasklet, so if another part of the code re-enables the + * interrupt, that is fine */ + ipw2100_disable_interrupts(priv); + + tasklet_schedule(&priv->irq_tasklet); + spin_unlock(&priv->low_lock); + + return IRQ_HANDLED; + none: + spin_unlock(&priv->low_lock); + return IRQ_NONE; +} + +static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct list_head *element; + struct ipw2100_tx_packet *packet; + unsigned long flags; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (!(priv->status & STATUS_ASSOCIATED)) { + IPW_DEBUG_INFO("Can not transmit when not connected.\n"); + priv->ieee->stats.tx_carrier_errors++; + netif_stop_queue(dev); + goto fail_unlock; + } + + if (list_empty(&priv->tx_free_list)) + goto fail_unlock; + + element = priv->tx_free_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + packet->info.d_struct.txb = txb; + + IPW_DEBUG_TX("Sending fragment (%d bytes):\n", + txb->fragments[0]->len); + printk_buf(IPW_DL_TX, txb->fragments[0]->data, + txb->fragments[0]->len); + + packet->jiffy_start = jiffies; + + list_del(element); + DEC_STAT(&priv->tx_free_stat); + + list_add_tail(element, &priv->tx_pend_list); + INC_STAT(&priv->tx_pend_stat); + + ipw2100_tx_send_data(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + return 0; + + fail_unlock: + netif_stop_queue(dev); + spin_unlock_irqrestore(&priv->low_lock, flags); + return 1; +} + + +static int ipw2100_msg_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + void *v; + dma_addr_t p; + + priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc( + IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet), + GFP_KERNEL); + if (!priv->msg_buffers) { + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg " + "buffers.\n", priv->net_dev->name); + return -ENOMEM; + } + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { + v = pci_alloc_consistent( + priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + &p); + if (!v) { + printk(KERN_ERR DRV_NAME ": " + "%s: PCI alloc failed for msg " + "buffers.\n", + priv->net_dev->name); + err = -ENOMEM; + break; + } + + memset(v, 0, sizeof(struct ipw2100_cmd_header)); + + priv->msg_buffers[i].type = COMMAND; + priv->msg_buffers[i].info.c_struct.cmd = + (struct ipw2100_cmd_header*)v; + priv->msg_buffers[i].info.c_struct.cmd_phys = p; + } + + if (i == IPW_COMMAND_POOL_SIZE) + return 0; + + for (j = 0; j < i; j++) { + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + priv->msg_buffers[j].info.c_struct.cmd, + priv->msg_buffers[j].info.c_struct.cmd_phys); + } + + kfree(priv->msg_buffers); + priv->msg_buffers = NULL; + + return err; +} + +static int ipw2100_msg_initialize(struct ipw2100_priv *priv) +{ + int i; + + INIT_LIST_HEAD(&priv->msg_free_list); + INIT_LIST_HEAD(&priv->msg_pend_list); + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) + list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list); + SET_STAT(&priv->msg_free_stat, i); + + return 0; +} + +static void ipw2100_msg_free(struct ipw2100_priv *priv) +{ + int i; + + if (!priv->msg_buffers) + return; + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { + pci_free_consistent(priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + priv->msg_buffers[i].info.c_struct.cmd, + priv->msg_buffers[i].info.c_struct.cmd_phys); + } + + kfree(priv->msg_buffers); + priv->msg_buffers = NULL; +} + +static ssize_t show_pci(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev); + char *out = buf; + int i, j; + u32 val; + + for (i = 0; i < 16; i++) { + out += sprintf(out, "[%08X] ", i * 16); + for (j = 0; j < 16; j += 4) { + pci_read_config_dword(pci_dev, i * 16 + j, &val); + out += sprintf(out, "%08X ", val); + } + out += sprintf(out, "\n"); + } + + return out - buf; +} +static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL); + +static ssize_t show_cfg(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->config); +} +static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); + +static ssize_t show_status(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_capability(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->capability); +} +static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL); + + +#define IPW2100_REG(x) { IPW_ ##x, #x } +static const struct { + u32 addr; + const char *name; +} hw_data[] = { + IPW2100_REG(REG_GP_CNTRL), + IPW2100_REG(REG_GPIO), + IPW2100_REG(REG_INTA), + IPW2100_REG(REG_INTA_MASK), + IPW2100_REG(REG_RESET_REG), +}; +#define IPW2100_NIC(x, s) { x, #x, s } +static const struct { + u32 addr; + const char *name; + size_t size; +} nic_data[] = { + IPW2100_NIC(IPW2100_CONTROL_REG, 2), + IPW2100_NIC(0x210014, 1), + IPW2100_NIC(0x210000, 1), +}; +#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d } +static const struct { + u8 index; + const char *name; + const char *desc; +} ord_data[] = { + IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_DIR_DATA, "successful Directed Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_DIR_DATA1, "successful Directed Tx's (MSDU) @ 1MB"), + IPW2100_ORD(STAT_TX_DIR_DATA2, "successful Directed Tx's (MSDU) @ 2MB"), + IPW2100_ORD(STAT_TX_DIR_DATA5_5, "successful Directed Tx's (MSDU) @ 5_5MB"), + IPW2100_ORD(STAT_TX_DIR_DATA11, "successful Directed Tx's (MSDU) @ 11MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA1, "successful Non_Directed Tx's (MSDU) @ 1MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA2, "successful Non_Directed Tx's (MSDU) @ 2MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA11, "successful Non_Directed Tx's (MSDU) @ 11MB"), + IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"), + IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"), + IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"), + IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"), + IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"), + IPW2100_ORD(STAT_TX_ASSN_RESP, "successful Association response Tx's"), + IPW2100_ORD(STAT_TX_REASSN, "successful Reassociation Tx's"), + IPW2100_ORD(STAT_TX_REASSN_RESP, "successful Reassociation response Tx's"), + IPW2100_ORD(STAT_TX_PROBE, "probes successfully transmitted"), + IPW2100_ORD(STAT_TX_PROBE_RESP, "probe responses successfully transmitted"), + IPW2100_ORD(STAT_TX_BEACON, "tx beacon"), + IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"), + IPW2100_ORD(STAT_TX_DISASSN, "successful Disassociation TX"), + IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"), + IPW2100_ORD(STAT_TX_DEAUTH, "successful Deauthentication TX"), + IPW2100_ORD(STAT_TX_TOTAL_BYTES, "Total successful Tx data bytes"), + IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"), + IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"), + IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"), + IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"), + IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"), + IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"), + IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"), + IPW2100_ORD(STAT_TX_DISASSN_FAIL, "times disassociation failed"), + IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"), + IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"), + IPW2100_ORD(STAT_RX_HOST, "packets passed to host"), + IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"), + IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"), + IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"), + IPW2100_ORD(STAT_RX_DIR_DATA5_5, "directed packets at 5.5MB"), + IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"), + IPW2100_ORD(STAT_RX_NODIR_DATA1, "nondirected packets at 1MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA2, "nondirected packets at 2MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA5_5, "nondirected packets at 5.5MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA11, "nondirected packets at 11MB"), + IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"), + IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), + IPW2100_ORD(STAT_RX_CTS, "Rx CTS"), + IPW2100_ORD(STAT_RX_ACK, "Rx ACK"), + IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"), + IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"), + IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"), + IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"), + IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"), + IPW2100_ORD(STAT_RX_REASSN_RESP, "Reassociation response Rx's"), + IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"), + IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"), + IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"), + IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"), + IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"), + IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"), + IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"), + IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"), + IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"), + IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"), + IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"), + IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"), + IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"), + IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"), + IPW2100_ORD(STAT_RX_DUPLICATE2, "duplicate rx packets at 2MB"), + IPW2100_ORD(STAT_RX_DUPLICATE5_5, "duplicate rx packets at 5.5MB"), + IPW2100_ORD(STAT_RX_DUPLICATE11, "duplicate rx packets at 11MB"), + IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"), + IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"), + IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"), + IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"), + IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, "rx frames with invalid protocol"), + IPW2100_ORD(SYS_BOOT_TIME, "Boot time"), + IPW2100_ORD(STAT_RX_NO_BUFFER, "rx frames rejected due to no buffer"), + IPW2100_ORD(STAT_RX_MISSING_FRAG, "rx frames dropped due to missing fragment"), + IPW2100_ORD(STAT_RX_ORPHAN_FRAG, "rx frames dropped due to non-sequential fragment"), + IPW2100_ORD(STAT_RX_ORPHAN_FRAME, "rx frames dropped due to unmatched 1st frame"), + IPW2100_ORD(STAT_RX_FRAG_AGEOUT, "rx frames dropped due to uncompleted frame"), + IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"), + IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"), + IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"), + IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, "poll response timeouts"), + IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"), + IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"), + IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"), + IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"), + IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"), + IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"), + IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"), + IPW2100_ORD(ASSOCIATED_AP_PTR, "0 if not associated, else pointer to AP table entry"), + IPW2100_ORD(AVAILABLE_AP_CNT, "AP's decsribed in the AP table"), + IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"), + IPW2100_ORD(STAT_AP_ASSNS, "associations"), + IPW2100_ORD(STAT_ASSN_FAIL, "association failures"), + IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"), + IPW2100_ORD(STAT_FULL_SCANS, "full scans"), + IPW2100_ORD(CARD_DISABLED, "Card Disabled"), + IPW2100_ORD(STAT_ROAM_INHIBIT, "times roaming was inhibited due to activity"), + IPW2100_ORD(RSSI_AT_ASSN, "RSSI of associated AP at time of association"), + IPW2100_ORD(STAT_ASSN_CAUSE1, "reassociation: no probe response or TX on hop"), + IPW2100_ORD(STAT_ASSN_CAUSE2, "reassociation: poor tx/rx quality"), + IPW2100_ORD(STAT_ASSN_CAUSE3, "reassociation: tx/rx quality (excessive AP load"), + IPW2100_ORD(STAT_ASSN_CAUSE4, "reassociation: AP RSSI level"), + IPW2100_ORD(STAT_ASSN_CAUSE5, "reassociations due to load leveling"), + IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"), + IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"), + IPW2100_ORD(STATION_TABLE_CNT, "entries in association table"), + IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"), + IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"), + IPW2100_ORD(COUNTRY_CODE, "IEEE country code as recv'd from beacon"), + IPW2100_ORD(COUNTRY_CHANNELS, "channels suported by country"), + IPW2100_ORD(RESET_CNT, "adapter resets (warm)"), + IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"), + IPW2100_ORD(ANTENNA_DIVERSITY, "TRUE if antenna diversity is disabled"), + IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"), + IPW2100_ORD(OUR_FREQ, "current radio freq lower digits - channel ID"), + IPW2100_ORD(RTC_TIME, "current RTC time"), + IPW2100_ORD(PORT_TYPE, "operating mode"), + IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"), + IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"), + IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"), + IPW2100_ORD(BASIC_RATES, "basic tx rates"), + IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"), + IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"), + IPW2100_ORD(CAPABILITIES, "Management frame capability field"), + IPW2100_ORD(AUTH_TYPE, "Type of authentication"), + IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"), + IPW2100_ORD(RTS_THRESHOLD, "Min packet length for RTS handshaking"), + IPW2100_ORD(INT_MODE, "International mode"), + IPW2100_ORD(FRAGMENTATION_THRESHOLD, "protocol frag threshold"), + IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"), + IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, "EEPROM size in SRAM"), + IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"), + IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, "EEPROM IBSS 11b channel set"), + IPW2100_ORD(MAC_VERSION, "MAC Version"), + IPW2100_ORD(MAC_REVISION, "MAC Revision"), + IPW2100_ORD(RADIO_VERSION, "Radio Version"), + IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"), + IPW2100_ORD(UCODE_VERSION, "Ucode Version"), +}; + + +static ssize_t show_registers(struct device *d, struct device_attribute *attr, + char *buf) +{ + int i; + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char * out = buf; + u32 val = 0; + + out += sprintf(out, "%30s [Address ] : Hex\n", "Register"); + + for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) { + read_register(dev, hw_data[i].addr, &val); + out += sprintf(out, "%30s [%08X] : %08X\n", + hw_data[i].name, hw_data[i].addr, val); + } + + return out - buf; +} +static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); + + +static ssize_t show_hardware(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char * out = buf; + int i; + + out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry"); + + for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) { + u8 tmp8; + u16 tmp16; + u32 tmp32; + + switch (nic_data[i].size) { + case 1: + read_nic_byte(dev, nic_data[i].addr, &tmp8); + out += sprintf(out, "%30s [%08X] : %02X\n", + nic_data[i].name, nic_data[i].addr, + tmp8); + break; + case 2: + read_nic_word(dev, nic_data[i].addr, &tmp16); + out += sprintf(out, "%30s [%08X] : %04X\n", + nic_data[i].name, nic_data[i].addr, + tmp16); + break; + case 4: + read_nic_dword(dev, nic_data[i].addr, &tmp32); + out += sprintf(out, "%30s [%08X] : %08X\n", + nic_data[i].name, nic_data[i].addr, + tmp32); + break; + } + } + return out - buf; +} +static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL); + + +static ssize_t show_memory(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + static unsigned long loop = 0; + int len = 0; + u32 buffer[4]; + int i; + char line[81]; + + if (loop >= 0x30000) + loop = 0; + + /* sysfs provides us PAGE_SIZE buffer */ + while (len < PAGE_SIZE - 128 && loop < 0x30000) { + + if (priv->snapshot[0]) for (i = 0; i < 4; i++) + buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4); + else for (i = 0; i < 4; i++) + read_nic_dword(dev, loop + i * 4, &buffer[i]); + + if (priv->dump_raw) + len += sprintf(buf + len, + "%c%c%c%c" + "%c%c%c%c" + "%c%c%c%c" + "%c%c%c%c", + ((u8*)buffer)[0x0], + ((u8*)buffer)[0x1], + ((u8*)buffer)[0x2], + ((u8*)buffer)[0x3], + ((u8*)buffer)[0x4], + ((u8*)buffer)[0x5], + ((u8*)buffer)[0x6], + ((u8*)buffer)[0x7], + ((u8*)buffer)[0x8], + ((u8*)buffer)[0x9], + ((u8*)buffer)[0xa], + ((u8*)buffer)[0xb], + ((u8*)buffer)[0xc], + ((u8*)buffer)[0xd], + ((u8*)buffer)[0xe], + ((u8*)buffer)[0xf]); + else + len += sprintf(buf + len, "%s\n", + snprint_line(line, sizeof(line), + (u8*)buffer, 16, loop)); + loop += 16; + } + + return len; +} + +static ssize_t store_memory(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + const char *p = buf; + + if (count < 1) + return count; + + if (p[0] == '1' || + (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) { + IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n", + dev->name); + priv->dump_raw = 1; + + } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' && + tolower(p[1]) == 'f')) { + IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n", + dev->name); + priv->dump_raw = 0; + + } else if (tolower(p[0]) == 'r') { + IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", + dev->name); + ipw2100_snapshot_free(priv); + + } else + IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, " + "reset = clear memory snapshot\n", + dev->name); + + return count; +} +static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory); + + +static ssize_t show_ordinals(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + u32 val = 0; + int len = 0; + u32 val_len; + static int loop = 0; + + if (loop >= sizeof(ord_data) / sizeof(*ord_data)) + loop = 0; + + /* sysfs provides us PAGE_SIZE buffer */ + while (len < PAGE_SIZE - 128 && + loop < (sizeof(ord_data) / sizeof(*ord_data))) { + + val_len = sizeof(u32); + + if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val, + &val_len)) + len += sprintf(buf + len, "[0x%02X] = ERROR %s\n", + ord_data[loop].index, + ord_data[loop].desc); + else + len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n", + ord_data[loop].index, val, + ord_data[loop].desc); + loop++; + } + + return len; +} +static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL); + + +static ssize_t show_stats(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char * out = buf; + + out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n", + priv->interrupts, priv->tx_interrupts, + priv->rx_interrupts, priv->inta_other); + out += sprintf(out, "firmware resets: %d\n", priv->resets); + out += sprintf(out, "firmware hangs: %d\n", priv->hangs); +#ifdef CONFIG_IPW_DEBUG + out += sprintf(out, "packet mismatch image: %s\n", + priv->snapshot[0] ? "YES" : "NO"); +#endif + + return out - buf; +} +static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL); + + +static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode) +{ + int err; + + if (mode == priv->ieee->iw_mode) + return 0; + + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + + switch (mode) { + case IW_MODE_INFRA: + priv->net_dev->type = ARPHRD_ETHER; + break; + case IW_MODE_ADHOC: + priv->net_dev->type = ARPHRD_ETHER; + break; +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + priv->last_mode = priv->ieee->iw_mode; + priv->net_dev->type = ARPHRD_IEEE80211; + break; +#endif /* CONFIG_IPW2100_MONITOR */ + } + + priv->ieee->iw_mode = mode; + +#ifdef CONFIG_PM + /* Indicate ipw2100_download_firmware download firmware + * from disk instead of memory. */ + ipw2100_firmware.version = 0; +#endif + + printk(KERN_INFO "%s: Reseting on mode change.\n", + priv->net_dev->name); + priv->reset_backoff = 0; + schedule_reset(priv); + + return 0; +} + +static ssize_t show_internals(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + int len = 0; + +#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x) + + if (priv->status & STATUS_ASSOCIATED) + len += sprintf(buf + len, "connected: %lu\n", + get_seconds() - priv->connect_start); + else + len += sprintf(buf + len, "not connected\n"); + + DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p); + DUMP_VAR(status, 08lx); + DUMP_VAR(config, 08lx); + DUMP_VAR(capability, 08lx); + + len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc); + + DUMP_VAR(fatal_error, d); + DUMP_VAR(stop_hang_check, d); + DUMP_VAR(stop_rf_kill, d); + DUMP_VAR(messages_sent, d); + + DUMP_VAR(tx_pend_stat.value, d); + DUMP_VAR(tx_pend_stat.hi, d); + + DUMP_VAR(tx_free_stat.value, d); + DUMP_VAR(tx_free_stat.lo, d); + + DUMP_VAR(msg_free_stat.value, d); + DUMP_VAR(msg_free_stat.lo, d); + + DUMP_VAR(msg_pend_stat.value, d); + DUMP_VAR(msg_pend_stat.hi, d); + + DUMP_VAR(fw_pend_stat.value, d); + DUMP_VAR(fw_pend_stat.hi, d); + + DUMP_VAR(txq_stat.value, d); + DUMP_VAR(txq_stat.lo, d); + + DUMP_VAR(ieee->scans, d); + DUMP_VAR(reset_backoff, d); + + return len; +} +static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL); + + +static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char essid[IW_ESSID_MAX_SIZE + 1]; + u8 bssid[ETH_ALEN]; + u32 chan = 0; + char * out = buf; + int length; + int ret; + + memset(essid, 0, sizeof(essid)); + memset(bssid, 0, sizeof(bssid)); + + length = IW_ESSID_MAX_SIZE; + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + length = sizeof(bssid); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, + bssid, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + length = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + out += sprintf(out, "ESSID: %s\n", essid); + out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n", + bssid[0], bssid[1], bssid[2], + bssid[3], bssid[4], bssid[5]); + out += sprintf(out, "Channel: %d\n", chan); + + return out - buf; +} +static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL); + + +#ifdef CONFIG_IPW_DEBUG +static ssize_t show_debug_level(struct device_driver *d, char *buf) +{ + return sprintf(buf, "0x%08X\n", ipw2100_debug_level); +} + +static ssize_t store_debug_level(struct device_driver *d, const char *buf, + size_t count) +{ + char *p = (char *)buf; + u32 val; + + if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { + p++; + if (p[0] == 'x' || p[0] == 'X') + p++; + val = simple_strtoul(p, &p, 16); + } else + val = simple_strtoul(p, &p, 10); + if (p == buf) + IPW_DEBUG_INFO(DRV_NAME + ": %s is not in hex or decimal form.\n", buf); + else + ipw2100_debug_level = val; + + return strnlen(buf, count); +} +static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level, + store_debug_level); +#endif /* CONFIG_IPW_DEBUG */ + + +static ssize_t show_fatal_error(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char *out = buf; + int i; + + if (priv->fatal_error) + out += sprintf(out, "0x%08X\n", + priv->fatal_error); + else + out += sprintf(out, "0\n"); + + for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) { + if (!priv->fatal_errors[(priv->fatal_index - i) % + IPW2100_ERROR_QUEUE]) + continue; + + out += sprintf(out, "%d. 0x%08X\n", i, + priv->fatal_errors[(priv->fatal_index - i) % + IPW2100_ERROR_QUEUE]); + } + + return out - buf; +} + +static ssize_t store_fatal_error(struct device *d, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + schedule_reset(priv); + return count; +} +static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error); + + +static ssize_t show_scan_age(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d\n", priv->ieee->scan_age); +} + +static ssize_t store_scan_age(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char buffer[] = "00000000"; + unsigned long len = + (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1; + unsigned long val; + char *p = buffer; + + IPW_DEBUG_INFO("enter\n"); + + strncpy(buffer, buf, len); + buffer[len] = 0; + + if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { + p++; + if (p[0] == 'x' || p[0] == 'X') + p++; + val = simple_strtoul(p, &p, 16); + } else + val = simple_strtoul(p, &p, 10); + if (p == buffer) { + IPW_DEBUG_INFO("%s: user supplied invalid value.\n", + dev->name); + } else { + priv->ieee->scan_age = val; + IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age); + } + + IPW_DEBUG_INFO("exit\n"); + return len; +} +static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age); + + +static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, + char *buf) +{ + /* 0 - RF kill not enabled + 1 - SW based RF kill active (sysfs) + 2 - HW based RF kill active + 3 - Both HW and SW baed RF kill active */ + struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data; + int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | + (rf_kill_active(priv) ? 0x2 : 0x0); + return sprintf(buf, "%i\n", val); +} + +static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio) +{ + if ((disable_radio ? 1 : 0) == + (priv->status & STATUS_RF_KILL_SW ? 1 : 0)) + return 0 ; + + IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n", + disable_radio ? "OFF" : "ON"); + + down(&priv->action_sem); + + if (disable_radio) { + priv->status |= STATUS_RF_KILL_SW; + ipw2100_down(priv); + } else { + priv->status &= ~STATUS_RF_KILL_SW; + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by HW switch\n"); + /* Make sure the RF_KILL check timer is running */ + priv->stop_rf_kill = 0; + cancel_delayed_work(&priv->rf_kill); + queue_delayed_work(priv->workqueue, &priv->rf_kill, + HZ); + } else + schedule_reset(priv); + } + + up(&priv->action_sem); + return 1; +} + +static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + ipw_radio_kill_sw(priv, buf[0] == '1'); + return count; +} +static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill); + + +static struct attribute *ipw2100_sysfs_entries[] = { + &dev_attr_hardware.attr, + &dev_attr_registers.attr, + &dev_attr_ordinals.attr, + &dev_attr_pci.attr, + &dev_attr_stats.attr, + &dev_attr_internals.attr, + &dev_attr_bssinfo.attr, + &dev_attr_memory.attr, + &dev_attr_scan_age.attr, + &dev_attr_fatal_error.attr, + &dev_attr_rf_kill.attr, + &dev_attr_cfg.attr, + &dev_attr_status.attr, + &dev_attr_capability.attr, + NULL, +}; + +static struct attribute_group ipw2100_attribute_group = { + .attrs = ipw2100_sysfs_entries, +}; + + +static int status_queue_allocate(struct ipw2100_priv *priv, int entries) +{ + struct ipw2100_status_queue *q = &priv->status_queue; + + IPW_DEBUG_INFO("enter\n"); + + q->size = entries * sizeof(struct ipw2100_status); + q->drv = (struct ipw2100_status *)pci_alloc_consistent( + priv->pci_dev, q->size, &q->nic); + if (!q->drv) { + IPW_DEBUG_WARNING( + "Can not allocate status queue.\n"); + return -ENOMEM; + } + + memset(q->drv, 0, q->size); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static void status_queue_free(struct ipw2100_priv *priv) +{ + IPW_DEBUG_INFO("enter\n"); + + if (priv->status_queue.drv) { + pci_free_consistent( + priv->pci_dev, priv->status_queue.size, + priv->status_queue.drv, priv->status_queue.nic); + priv->status_queue.drv = NULL; + } + + IPW_DEBUG_INFO("exit\n"); +} + +static int bd_queue_allocate(struct ipw2100_priv *priv, + struct ipw2100_bd_queue *q, int entries) +{ + IPW_DEBUG_INFO("enter\n"); + + memset(q, 0, sizeof(struct ipw2100_bd_queue)); + + q->entries = entries; + q->size = entries * sizeof(struct ipw2100_bd); + q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic); + if (!q->drv) { + IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n"); + return -ENOMEM; + } + memset(q->drv, 0, q->size); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static void bd_queue_free(struct ipw2100_priv *priv, + struct ipw2100_bd_queue *q) +{ + IPW_DEBUG_INFO("enter\n"); + + if (!q) + return; + + if (q->drv) { + pci_free_consistent(priv->pci_dev, + q->size, q->drv, q->nic); + q->drv = NULL; + } + + IPW_DEBUG_INFO("exit\n"); +} + +static void bd_queue_initialize( + struct ipw2100_priv *priv, struct ipw2100_bd_queue * q, + u32 base, u32 size, u32 r, u32 w) +{ + IPW_DEBUG_INFO("enter\n"); + + IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, (u32)q->nic); + + write_register(priv->net_dev, base, q->nic); + write_register(priv->net_dev, size, q->entries); + write_register(priv->net_dev, r, q->oldest); + write_register(priv->net_dev, w, q->next); + + IPW_DEBUG_INFO("exit\n"); +} + +static void ipw2100_kill_workqueue(struct ipw2100_priv *priv) +{ + if (priv->workqueue) { + priv->stop_rf_kill = 1; + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->reset_work); + cancel_delayed_work(&priv->security_work); + cancel_delayed_work(&priv->wx_event_work); + cancel_delayed_work(&priv->hang_check); + cancel_delayed_work(&priv->rf_kill); + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + } +} + +static int ipw2100_tx_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + void *v; + dma_addr_t p; + + IPW_DEBUG_INFO("enter\n"); + + err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n", + priv->net_dev->name); + return err; + } + + priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc( + TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet), + GFP_ATOMIC); + if (!priv->tx_buffers) { + printk(KERN_ERR DRV_NAME ": %s: alloc failed form tx buffers.\n", + priv->net_dev->name); + bd_queue_free(priv, &priv->tx_queue); + return -ENOMEM; + } + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + v = pci_alloc_consistent( + priv->pci_dev, sizeof(struct ipw2100_data_header), &p); + if (!v) { + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for tx " + "buffers.\n", priv->net_dev->name); + err = -ENOMEM; + break; + } + + priv->tx_buffers[i].type = DATA; + priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v; + priv->tx_buffers[i].info.d_struct.data_phys = p; + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + + if (i == TX_PENDED_QUEUE_LENGTH) + return 0; + + for (j = 0; j < i; j++) { + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_data_header), + priv->tx_buffers[j].info.d_struct.data, + priv->tx_buffers[j].info.d_struct.data_phys); + } + + kfree(priv->tx_buffers); + priv->tx_buffers = NULL; + + return err; +} + +static void ipw2100_tx_initialize(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + /* + * reinitialize packet info lists + */ + INIT_LIST_HEAD(&priv->fw_pend_list); + INIT_STAT(&priv->fw_pend_stat); + + /* + * reinitialize lists + */ + INIT_LIST_HEAD(&priv->tx_pend_list); + INIT_LIST_HEAD(&priv->tx_free_list); + INIT_STAT(&priv->tx_pend_stat); + INIT_STAT(&priv->tx_free_stat); + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + /* We simply drop any SKBs that have been queued for + * transmit */ + if (priv->tx_buffers[i].info.d_struct.txb) { + ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb); + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + + list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list); + } + + SET_STAT(&priv->tx_free_stat, i); + + priv->tx_queue.oldest = 0; + priv->tx_queue.available = priv->tx_queue.entries; + priv->tx_queue.next = 0; + INIT_STAT(&priv->txq_stat); + SET_STAT(&priv->txq_stat, priv->tx_queue.available); + + bd_queue_initialize(priv, &priv->tx_queue, + IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE, + IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE, + IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX); + + IPW_DEBUG_INFO("exit\n"); + +} + +static void ipw2100_tx_free(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + bd_queue_free(priv, &priv->tx_queue); + + if (!priv->tx_buffers) + return; + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + if (priv->tx_buffers[i].info.d_struct.txb) { + ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb); + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + if (priv->tx_buffers[i].info.d_struct.data) + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_data_header), + priv->tx_buffers[i].info.d_struct.data, + priv->tx_buffers[i].info.d_struct.data_phys); + } + + kfree(priv->tx_buffers); + priv->tx_buffers = NULL; + + IPW_DEBUG_INFO("exit\n"); +} + + + +static int ipw2100_rx_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + + IPW_DEBUG_INFO("enter\n"); + + err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_INFO("failed bd_queue_allocate\n"); + return err; + } + + err = status_queue_allocate(priv, RX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_INFO("failed status_queue_allocate\n"); + bd_queue_free(priv, &priv->rx_queue); + return err; + } + + /* + * allocate packets + */ + priv->rx_buffers = (struct ipw2100_rx_packet *) + kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet), + GFP_KERNEL); + if (!priv->rx_buffers) { + IPW_DEBUG_INFO("can't allocate rx packet buffer table\n"); + + bd_queue_free(priv, &priv->rx_queue); + + status_queue_free(priv); + + return -ENOMEM; + } + + for (i = 0; i < RX_QUEUE_LENGTH; i++) { + struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; + + err = ipw2100_alloc_skb(priv, packet); + if (unlikely(err)) { + err = -ENOMEM; + break; + } + + /* The BD holds the cache aligned address */ + priv->rx_queue.drv[i].host_addr = packet->dma_addr; + priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH; + priv->status_queue.drv[i].status_fields = 0; + } + + if (i == RX_QUEUE_LENGTH) + return 0; + + for (j = 0; j < i; j++) { + pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr, + sizeof(struct ipw2100_rx_packet), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->rx_buffers[j].skb); + } + + kfree(priv->rx_buffers); + priv->rx_buffers = NULL; + + bd_queue_free(priv, &priv->rx_queue); + + status_queue_free(priv); + + return err; +} + +static void ipw2100_rx_initialize(struct ipw2100_priv *priv) +{ + IPW_DEBUG_INFO("enter\n"); + + priv->rx_queue.oldest = 0; + priv->rx_queue.available = priv->rx_queue.entries - 1; + priv->rx_queue.next = priv->rx_queue.entries - 1; + + INIT_STAT(&priv->rxq_stat); + SET_STAT(&priv->rxq_stat, priv->rx_queue.available); + + bd_queue_initialize(priv, &priv->rx_queue, + IPW_MEM_HOST_SHARED_RX_BD_BASE, + IPW_MEM_HOST_SHARED_RX_BD_SIZE, + IPW_MEM_HOST_SHARED_RX_READ_INDEX, + IPW_MEM_HOST_SHARED_RX_WRITE_INDEX); + + /* set up the status queue */ + write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE, + priv->status_queue.nic); + + IPW_DEBUG_INFO("exit\n"); +} + +static void ipw2100_rx_free(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + bd_queue_free(priv, &priv->rx_queue); + status_queue_free(priv); + + if (!priv->rx_buffers) + return; + + for (i = 0; i < RX_QUEUE_LENGTH; i++) { + if (priv->rx_buffers[i].rxp) { + pci_unmap_single(priv->pci_dev, + priv->rx_buffers[i].dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->rx_buffers[i].skb); + } + } + + kfree(priv->rx_buffers); + priv->rx_buffers = NULL; + + IPW_DEBUG_INFO("exit\n"); +} + +static int ipw2100_read_mac_address(struct ipw2100_priv *priv) +{ + u32 length = ETH_ALEN; + u8 mac[ETH_ALEN]; + + int err; + + err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, + mac, &length); + if (err) { + IPW_DEBUG_INFO("MAC address read failed\n"); + return -EIO; + } + IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + + memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN); + + return 0; +} + +/******************************************************************** + * + * Firmware Commands + * + ********************************************************************/ + +static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode) +{ + struct host_command cmd = { + .host_command = ADAPTER_ADDRESS, + .host_command_sequence = 0, + .host_command_length = ETH_ALEN + }; + int err; + + IPW_DEBUG_HC("SET_MAC_ADDRESS\n"); + + IPW_DEBUG_INFO("enter\n"); + + if (priv->config & CFG_CUSTOM_MAC) { + memcpy(cmd.host_command_parameters, priv->mac_addr, + ETH_ALEN); + memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN); + } else + memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr, + ETH_ALEN); + + err = ipw2100_hw_send_command(priv, &cmd); + + IPW_DEBUG_INFO("exit\n"); + return err; +} + +static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type, + int batch_mode) +{ + struct host_command cmd = { + .host_command = PORT_TYPE, + .host_command_sequence = 0, + .host_command_length = sizeof(u32) + }; + int err; + + switch (port_type) { + case IW_MODE_INFRA: + cmd.host_command_parameters[0] = IPW_BSS; + break; + case IW_MODE_ADHOC: + cmd.host_command_parameters[0] = IPW_IBSS; + break; + } + + IPW_DEBUG_HC("PORT_TYPE: %s\n", + port_type == IPW_IBSS ? "Ad-Hoc" : "Managed"); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + + +static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, + int batch_mode) +{ + struct host_command cmd = { + .host_command = CHANNEL, + .host_command_sequence = 0, + .host_command_length = sizeof(u32) + }; + int err; + + cmd.host_command_parameters[0] = channel; + + IPW_DEBUG_HC("CHANNEL: %d\n", channel); + + /* If BSS then we don't support channel selection */ + if (priv->ieee->iw_mode == IW_MODE_INFRA) + return 0; + + if ((channel != 0) && + ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL))) + return -EINVAL; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + IPW_DEBUG_INFO("Failed to set channel to %d", + channel); + return err; + } + + if (channel) + priv->config |= CFG_STATIC_CHANNEL; + else + priv->config &= ~CFG_STATIC_CHANNEL; + + priv->channel = channel; + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + return 0; +} + +static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode) +{ + struct host_command cmd = { + .host_command = SYSTEM_CONFIG, + .host_command_sequence = 0, + .host_command_length = 12, + }; + u32 ibss_mask, len = sizeof(u32); + int err; + + /* Set system configuration */ + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) + cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START; + + cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK | + IPW_CFG_BSS_MASK | + IPW_CFG_802_1x_ENABLE; + + if (!(priv->config & CFG_LONG_PREAMBLE)) + cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO; + + err = ipw2100_get_ordinal(priv, + IPW_ORD_EEPROM_IBSS_11B_CHANNELS, + &ibss_mask, &len); + if (err) + ibss_mask = IPW_IBSS_11B_DEFAULT_MASK; + + cmd.host_command_parameters[1] = REG_CHANNEL_MASK; + cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask; + + /* 11b only */ + /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/ + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + +/* If IPv6 is configured in the kernel then we don't want to filter out all + * of the multicast packets as IPv6 needs some. */ +#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) + cmd.host_command = ADD_MULTICAST; + cmd.host_command_sequence = 0; + cmd.host_command_length = 0; + + ipw2100_hw_send_command(priv, &cmd); +#endif + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + return 0; +} + +static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, + int batch_mode) +{ + struct host_command cmd = { + .host_command = BASIC_TX_RATES, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = rate & TX_RATE_MASK; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + /* Set BASIC TX Rate first */ + ipw2100_hw_send_command(priv, &cmd); + + /* Set TX Rate */ + cmd.host_command = TX_RATES; + ipw2100_hw_send_command(priv, &cmd); + + /* Set MSDU TX Rate */ + cmd.host_command = MSDU_TX_RATES; + ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + priv->tx_rates = rate; + + return 0; +} + +static int ipw2100_set_power_mode(struct ipw2100_priv *priv, + int power_level) +{ + struct host_command cmd = { + .host_command = POWER_MODE, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = power_level; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + if (power_level == IPW_POWER_MODE_CAM) + priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); + else + priv->power_mode = IPW_POWER_ENABLED | power_level; + +#ifdef CONFIG_IPW2100_TX_POWER + if (priv->port_type == IBSS && + priv->adhoc_power != DFTL_IBSS_TX_POWER) { + /* Set beacon interval */ + cmd.host_command = TX_POWER_INDEX; + cmd.host_command_parameters[0] = (u32)priv->adhoc_power; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + } +#endif + + return 0; +} + + +static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold) +{ + struct host_command cmd = { + .host_command = RTS_THRESHOLD, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + if (threshold & RTS_DISABLED) + cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD; + else + cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->rts_threshold = threshold; + + return 0; +} + +#if 0 +int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv, + u32 threshold, int batch_mode) +{ + struct host_command cmd = { + .host_command = FRAG_THRESHOLD, + .host_command_sequence = 0, + .host_command_length = 4, + .host_command_parameters[0] = 0, + }; + int err; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (threshold == 0) + threshold = DEFAULT_FRAG_THRESHOLD; + else { + threshold = max(threshold, MIN_FRAG_THRESHOLD); + threshold = min(threshold, MAX_FRAG_THRESHOLD); + } + + cmd.host_command_parameters[0] = threshold; + + IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold); + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + if (!err) + priv->frag_threshold = threshold; + + return err; +} +#endif + +static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry) +{ + struct host_command cmd = { + .host_command = SHORT_RETRY_LIMIT, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = retry; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->short_retry_limit = retry; + + return 0; +} + +static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry) +{ + struct host_command cmd = { + .host_command = LONG_RETRY_LIMIT, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = retry; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->long_retry_limit = retry; + + return 0; +} + + +static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid, + int batch_mode) +{ + struct host_command cmd = { + .host_command = MANDATORY_BSSID, + .host_command_sequence = 0, + .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN + }; + int err; + +#ifdef CONFIG_IPW_DEBUG + if (bssid != NULL) + IPW_DEBUG_HC( + "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n", + bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], + bssid[5]); + else + IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n"); +#endif + /* if BSSID is empty then we disable mandatory bssid mode */ + if (bssid != NULL) + memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +#ifdef CONFIG_IEEE80211_WPA +static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = DISASSOCIATION_BSSID, + .host_command_sequence = 0, + .host_command_length = ETH_ALEN + }; + int err; + int len; + + IPW_DEBUG_HC("DISASSOCIATION_BSSID\n"); + + len = ETH_ALEN; + /* The Firmware currently ignores the BSSID and just disassociates from + * the currently associated AP -- but in the off chance that a future + * firmware does use the BSSID provided here, we go ahead and try and + * set it to the currently associated AP's BSSID */ + memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN); + + err = ipw2100_hw_send_command(priv, &cmd); + + return err; +} +#endif + +/* + * Pseudo code for setting up wpa_frame: + */ +#if 0 +void x(struct ieee80211_assoc_frame *wpa_assoc) +{ + struct ipw2100_wpa_assoc_frame frame; + frame->fixed_ie_mask = IPW_WPA_CAPABILTIES | + IPW_WPA_LISTENINTERVAL | + IPW_WPA_AP_ADDRESS; + frame->capab_info = wpa_assoc->capab_info; + frame->lisen_interval = wpa_assoc->listent_interval; + memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN); + + /* UNKNOWN -- I'm not postivive about this part; don't have any WPA + * setup here to test it with. + * + * Walk the IEs in the wpa_assoc and figure out the total size of all + * that data. Stick that into frame->var_ie_len. Then memcpy() all of + * the IEs from wpa_frame into frame. + */ + frame->var_ie_len = calculate_ie_len(wpa_assoc); + memcpy(frame->var_ie, wpa_assoc->variable, frame->var_ie_len); + + ipw2100_set_wpa_ie(priv, &frame, 0); +} +#endif + + + + +static int ipw2100_set_wpa_ie(struct ipw2100_priv *, + struct ipw2100_wpa_assoc_frame *, int) +__attribute__ ((unused)); + +static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv, + struct ipw2100_wpa_assoc_frame *wpa_frame, + int batch_mode) +{ + struct host_command cmd = { + .host_command = SET_WPA_IE, + .host_command_sequence = 0, + .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame), + }; + int err; + + IPW_DEBUG_HC("SET_WPA_IE\n"); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + memcpy(cmd.host_command_parameters, wpa_frame, + sizeof(struct ipw2100_wpa_assoc_frame)); + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + if (ipw2100_enable_adapter(priv)) + err = -EIO; + } + + return err; +} + +struct security_info_params { + u32 allowed_ciphers; + u16 version; + u8 auth_mode; + u8 replay_counters_number; + u8 unicast_using_group; +} __attribute__ ((packed)); + +static int ipw2100_set_security_information(struct ipw2100_priv *priv, + int auth_mode, + int security_level, + int unicast_using_group, + int batch_mode) +{ + struct host_command cmd = { + .host_command = SET_SECURITY_INFORMATION, + .host_command_sequence = 0, + .host_command_length = sizeof(struct security_info_params) + }; + struct security_info_params *security = + (struct security_info_params *)&cmd.host_command_parameters; + int err; + memset(security, 0, sizeof(*security)); + + /* If shared key AP authentication is turned on, then we need to + * configure the firmware to try and use it. + * + * Actual data encryption/decryption is handled by the host. */ + security->auth_mode = auth_mode; + security->unicast_using_group = unicast_using_group; + + switch (security_level) { + default: + case SEC_LEVEL_0: + security->allowed_ciphers = IPW_NONE_CIPHER; + break; + case SEC_LEVEL_1: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER; + break; + case SEC_LEVEL_2: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_TKIP_CIPHER; + break; + case SEC_LEVEL_2_CKIP: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_CKIP_CIPHER; + break; + case SEC_LEVEL_3: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER; + break; + } + + IPW_DEBUG_HC( + "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n", + security->auth_mode, security->allowed_ciphers, security_level); + + security->replay_counters_number = 0; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +static int ipw2100_set_tx_power(struct ipw2100_priv *priv, + u32 tx_power) +{ + struct host_command cmd = { + .host_command = TX_POWER_INDEX, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err = 0; + + cmd.host_command_parameters[0] = tx_power; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) + err = ipw2100_hw_send_command(priv, &cmd); + if (!err) + priv->tx_power = tx_power; + + return 0; +} + +static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv, + u32 interval, int batch_mode) +{ + struct host_command cmd = { + .host_command = BEACON_INTERVAL, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = interval; + + IPW_DEBUG_INFO("enter\n"); + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + } + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + +void ipw2100_queues_initialize(struct ipw2100_priv *priv) +{ + ipw2100_tx_initialize(priv); + ipw2100_rx_initialize(priv); + ipw2100_msg_initialize(priv); +} + +void ipw2100_queues_free(struct ipw2100_priv *priv) +{ + ipw2100_tx_free(priv); + ipw2100_rx_free(priv); + ipw2100_msg_free(priv); +} + +int ipw2100_queues_allocate(struct ipw2100_priv *priv) +{ + if (ipw2100_tx_allocate(priv) || + ipw2100_rx_allocate(priv) || + ipw2100_msg_allocate(priv)) + goto fail; + + return 0; + + fail: + ipw2100_tx_free(priv); + ipw2100_rx_free(priv); + ipw2100_msg_free(priv); + return -ENOMEM; +} + +#define IPW_PRIVACY_CAPABLE 0x0008 + +static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags, + int batch_mode) +{ + struct host_command cmd = { + .host_command = WEP_FLAGS, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = flags; + + IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +struct ipw2100_wep_key { + u8 idx; + u8 len; + u8 key[13]; +}; + +/* Macros to ease up priting WEP keys */ +#define WEP_FMT_64 "%02X%02X%02X%02X-%02X" +#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X" +#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4] +#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10] + + +/** + * Set a the wep key + * + * @priv: struct to work on + * @idx: index of the key we want to set + * @key: ptr to the key data to set + * @len: length of the buffer at @key + * @batch_mode: FIXME perform the operation in batch mode, not + * disabling the device. + * + * @returns 0 if OK, < 0 errno code on error. + * + * Fill out a command structure with the new wep key, length an + * index and send it down the wire. + */ +static int ipw2100_set_key(struct ipw2100_priv *priv, + int idx, char *key, int len, int batch_mode) +{ + int keylen = len ? (len <= 5 ? 5 : 13) : 0; + struct host_command cmd = { + .host_command = WEP_KEY_INFO, + .host_command_sequence = 0, + .host_command_length = sizeof(struct ipw2100_wep_key), + }; + struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters; + int err; + + IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n", + idx, keylen, len); + + /* NOTE: We don't check cached values in case the firmware was reset + * or some other problem is occuring. If the user is setting the key, + * then we push the change */ + + wep_key->idx = idx; + wep_key->len = keylen; + + if (keylen) { + memcpy(wep_key->key, key, len); + memset(wep_key->key + len, 0, keylen - len); + } + + /* Will be optimized out on debug not being configured in */ + if (keylen == 0) + IPW_DEBUG_WEP("%s: Clearing key %d\n", + priv->net_dev->name, wep_key->idx); + else if (keylen == 5) + IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n", + priv->net_dev->name, wep_key->idx, wep_key->len, + WEP_STR_64(wep_key->key)); + else + IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128 + "\n", + priv->net_dev->name, wep_key->idx, wep_key->len, + WEP_STR_128(wep_key->key)); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + int err2 = ipw2100_enable_adapter(priv); + if (err == 0) + err = err2; + } + return err; +} + +static int ipw2100_set_key_index(struct ipw2100_priv *priv, + int idx, int batch_mode) +{ + struct host_command cmd = { + .host_command = WEP_KEY_INDEX, + .host_command_sequence = 0, + .host_command_length = 4, + .host_command_parameters = { idx }, + }; + int err; + + IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx); + + if (idx < 0 || idx > 3) + return -EINVAL; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + + +static int ipw2100_configure_security(struct ipw2100_priv *priv, + int batch_mode) +{ + int i, err, auth_mode, sec_level, use_group; + + if (!(priv->status & STATUS_RUNNING)) + return 0; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (!priv->sec.enabled) { + err = ipw2100_set_security_information( + priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1); + } else { + auth_mode = IPW_AUTH_OPEN; + if ((priv->sec.flags & SEC_AUTH_MODE) && + (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY)) + auth_mode = IPW_AUTH_SHARED; + + sec_level = SEC_LEVEL_0; + if (priv->sec.flags & SEC_LEVEL) + sec_level = priv->sec.level; + + use_group = 0; + if (priv->sec.flags & SEC_UNICAST_GROUP) + use_group = priv->sec.unicast_uses_group; + + err = ipw2100_set_security_information( + priv, auth_mode, sec_level, use_group, 1); + } + + if (err) + goto exit; + + if (priv->sec.enabled) { + for (i = 0; i < 4; i++) { + if (!(priv->sec.flags & (1 << i))) { + memset(priv->sec.keys[i], 0, WEP_KEY_LEN); + priv->sec.key_sizes[i] = 0; + } else { + err = ipw2100_set_key(priv, i, + priv->sec.keys[i], + priv->sec.key_sizes[i], + 1); + if (err) + goto exit; + } + } + + ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1); + } + + /* Always enable privacy so the Host can filter WEP packets if + * encrypted data is sent up */ + err = ipw2100_set_wep_flags( + priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1); + if (err) + goto exit; + + priv->status &= ~STATUS_SECURITY_UPDATED; + + exit: + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +static void ipw2100_security_work(struct ipw2100_priv *priv) +{ + /* If we happen to have reconnected before we get a chance to + * process this, then update the security settings--which causes + * a disassociation to occur */ + if (!(priv->status & STATUS_ASSOCIATED) && + priv->status & STATUS_SECURITY_UPDATED) + ipw2100_configure_security(priv, 0); +} + +static void shim__set_security(struct net_device *dev, + struct ieee80211_security *sec) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int i, force_update = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) + goto done; + + for (i = 0; i < 4; i++) { + if (sec->flags & (1 << i)) { + priv->sec.key_sizes[i] = sec->key_sizes[i]; + if (sec->key_sizes[i] == 0) + priv->sec.flags &= ~(1 << i); + else + memcpy(priv->sec.keys[i], sec->keys[i], + sec->key_sizes[i]); + priv->sec.flags |= (1 << i); + priv->status |= STATUS_SECURITY_UPDATED; + } + } + + if ((sec->flags & SEC_ACTIVE_KEY) && + priv->sec.active_key != sec->active_key) { + if (sec->active_key <= 3) { + priv->sec.active_key = sec->active_key; + priv->sec.flags |= SEC_ACTIVE_KEY; + } else + priv->sec.flags &= ~SEC_ACTIVE_KEY; + + priv->status |= STATUS_SECURITY_UPDATED; + } + + if ((sec->flags & SEC_AUTH_MODE) && + (priv->sec.auth_mode != sec->auth_mode)) { + priv->sec.auth_mode = sec->auth_mode; + priv->sec.flags |= SEC_AUTH_MODE; + priv->status |= STATUS_SECURITY_UPDATED; + } + + if (sec->flags & SEC_ENABLED && + priv->sec.enabled != sec->enabled) { + priv->sec.flags |= SEC_ENABLED; + priv->sec.enabled = sec->enabled; + priv->status |= STATUS_SECURITY_UPDATED; + force_update = 1; + } + + if (sec->flags & SEC_LEVEL && + priv->sec.level != sec->level) { + priv->sec.level = sec->level; + priv->sec.flags |= SEC_LEVEL; + priv->status |= STATUS_SECURITY_UPDATED; + } + + IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n", + priv->sec.flags & (1<<8) ? '1' : '0', + priv->sec.flags & (1<<7) ? '1' : '0', + priv->sec.flags & (1<<6) ? '1' : '0', + priv->sec.flags & (1<<5) ? '1' : '0', + priv->sec.flags & (1<<4) ? '1' : '0', + priv->sec.flags & (1<<3) ? '1' : '0', + priv->sec.flags & (1<<2) ? '1' : '0', + priv->sec.flags & (1<<1) ? '1' : '0', + priv->sec.flags & (1<<0) ? '1' : '0'); + +/* As a temporary work around to enable WPA until we figure out why + * wpa_supplicant toggles the security capability of the driver, which + * forces a disassocation with force_update... + * + * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ + if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) + ipw2100_configure_security(priv, 0); +done: + up(&priv->action_sem); +} + +static int ipw2100_adapter_setup(struct ipw2100_priv *priv) +{ + int err; + int batch_mode = 1; + u8 *bssid; + + IPW_DEBUG_INFO("enter\n"); + + err = ipw2100_disable_adapter(priv); + if (err) + return err; +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + err = ipw2100_set_channel(priv, priv->channel, batch_mode); + if (err) + return err; + + IPW_DEBUG_INFO("exit\n"); + + return 0; + } +#endif /* CONFIG_IPW2100_MONITOR */ + + err = ipw2100_read_mac_address(priv); + if (err) + return -EIO; + + err = ipw2100_set_mac_address(priv, batch_mode); + if (err) + return err; + + err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode); + if (err) + return err; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + err = ipw2100_set_channel(priv, priv->channel, batch_mode); + if (err) + return err; + } + + err = ipw2100_system_config(priv, batch_mode); + if (err) + return err; + + err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode); + if (err) + return err; + + /* Default to power mode OFF */ + err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); + if (err) + return err; + + err = ipw2100_set_rts_threshold(priv, priv->rts_threshold); + if (err) + return err; + + if (priv->config & CFG_STATIC_BSSID) + bssid = priv->bssid; + else + bssid = NULL; + err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode); + if (err) + return err; + + if (priv->config & CFG_STATIC_ESSID) + err = ipw2100_set_essid(priv, priv->essid, priv->essid_len, + batch_mode); + else + err = ipw2100_set_essid(priv, NULL, 0, batch_mode); + if (err) + return err; + + err = ipw2100_configure_security(priv, batch_mode); + if (err) + return err; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + err = ipw2100_set_ibss_beacon_interval( + priv, priv->beacon_interval, batch_mode); + if (err) + return err; + + err = ipw2100_set_tx_power(priv, priv->tx_power); + if (err) + return err; + } + + /* + err = ipw2100_set_fragmentation_threshold( + priv, priv->frag_threshold, batch_mode); + if (err) + return err; + */ + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + +/************************************************************************* + * + * EXTERNALLY CALLED METHODS + * + *************************************************************************/ + +/* This method is called by the network layer -- not to be confused with + * ipw2100_set_mac_address() declared above called by this driver (and this + * method as well) to talk to the firmware */ +static int ipw2100_set_address(struct net_device *dev, void *p) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct sockaddr *addr = p; + int err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + down(&priv->action_sem); + + priv->config |= CFG_CUSTOM_MAC; + memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); + + err = ipw2100_set_mac_address(priv, 0); + if (err) + goto done; + + priv->reset_backoff = 0; + up(&priv->action_sem); + ipw2100_reset_adapter(priv); + return 0; + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_open(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + unsigned long flags; + IPW_DEBUG_INFO("dev->open\n"); + + spin_lock_irqsave(&priv->low_lock, flags); + if (priv->status & STATUS_ASSOCIATED) { + netif_carrier_on(dev); + netif_start_queue(dev); + } + spin_unlock_irqrestore(&priv->low_lock, flags); + + return 0; +} + +static int ipw2100_close(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + unsigned long flags; + struct list_head *element; + struct ipw2100_tx_packet *packet; + + IPW_DEBUG_INFO("enter\n"); + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->status & STATUS_ASSOCIATED) + netif_carrier_off(dev); + netif_stop_queue(dev); + + /* Flush the TX queue ... */ + while (!list_empty(&priv->tx_pend_list)) { + element = priv->tx_pend_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + list_del(element); + DEC_STAT(&priv->tx_pend_stat); + + ieee80211_txb_free(packet->info.d_struct.txb); + packet->info.d_struct.txb = NULL; + + list_add_tail(element, &priv->tx_free_list); + INC_STAT(&priv->tx_free_stat); + } + spin_unlock_irqrestore(&priv->low_lock, flags); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + + +/* + * TODO: Fix this function... its just wrong + */ +static void ipw2100_tx_timeout(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + + priv->ieee->stats.tx_errors++; + +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + return; +#endif + + IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n", + dev->name); + schedule_reset(priv); +} + + +/* + * TODO: reimplement it so that it reads statistics + * from the adapter using ordinal tables + * instead of/in addition to collecting them + * in the driver + */ +static struct net_device_stats *ipw2100_stats(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + + return &priv->ieee->stats; +} + +/* Support for wpa_supplicant. Will be replaced with WEXT once + * they get WPA support. */ +#ifdef CONFIG_IEEE80211_WPA + +/* following definitions must match definitions in driver_ipw2100.c */ + +#define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 + +#define IPW2100_CMD_SET_WPA_PARAM 1 +#define IPW2100_CMD_SET_WPA_IE 2 +#define IPW2100_CMD_SET_ENCRYPTION 3 +#define IPW2100_CMD_MLME 4 + +#define IPW2100_PARAM_WPA_ENABLED 1 +#define IPW2100_PARAM_TKIP_COUNTERMEASURES 2 +#define IPW2100_PARAM_DROP_UNENCRYPTED 3 +#define IPW2100_PARAM_PRIVACY_INVOKED 4 +#define IPW2100_PARAM_AUTH_ALGS 5 +#define IPW2100_PARAM_IEEE_802_1X 6 + +#define IPW2100_MLME_STA_DEAUTH 1 +#define IPW2100_MLME_STA_DISASSOC 2 + +#define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2 +#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3 +#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4 +#define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5 +#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6 +#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7 + +#define IPW2100_CRYPT_ALG_NAME_LEN 16 + +struct ipw2100_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u8 name; + u32 value; + } wpa_param; + struct { + u32 len; + u8 *data; + } wpa_ie; + struct{ + int command; + int reason_code; + } mlme; + struct { + u8 alg[IPW2100_CRYPT_ALG_NAME_LEN]; + u8 set_tx; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + + } u; +}; + +/* end of driver_ipw2100.c code */ + +static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){ + + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_security sec = { + .flags = SEC_LEVEL | SEC_ENABLED, + }; + int ret = 0; + + ieee->wpa_enabled = value; + + if (value){ + sec.level = SEC_LEVEL_3; + sec.enabled = 1; + } else { + sec.level = SEC_LEVEL_0; + sec.enabled = 0; + } + + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + else + ret = -EOPNOTSUPP; + + return ret; +} + +#define AUTH_ALG_OPEN_SYSTEM 0x1 +#define AUTH_ALG_SHARED_KEY 0x2 + +static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){ + + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_security sec = { + .flags = SEC_AUTH_MODE, + }; + int ret = 0; + + if (value & AUTH_ALG_SHARED_KEY){ + sec.auth_mode = WLAN_AUTH_SHARED_KEY; + ieee->open_wep = 0; + } else { + sec.auth_mode = WLAN_AUTH_OPEN; + ieee->open_wep = 1; + } + + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + else + ret = -EOPNOTSUPP; + + return ret; +} + + +static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int ret=0; + + switch(name){ + case IPW2100_PARAM_WPA_ENABLED: + ret = ipw2100_wpa_enable(priv, value); + break; + + case IPW2100_PARAM_TKIP_COUNTERMEASURES: + priv->ieee->tkip_countermeasures=value; + break; + + case IPW2100_PARAM_DROP_UNENCRYPTED: + priv->ieee->drop_unencrypted=value; + break; + + case IPW2100_PARAM_PRIVACY_INVOKED: + priv->ieee->privacy_invoked=value; + break; + + case IPW2100_PARAM_AUTH_ALGS: + ret = ipw2100_wpa_set_auth_algs(priv, value); + break; + + case IPW2100_PARAM_IEEE_802_1X: + priv->ieee->ieee802_1x=value; + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n", + dev->name, name); + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int ret=0; + + switch(command){ + case IPW2100_MLME_STA_DEAUTH: + // silently ignore + break; + + case IPW2100_MLME_STA_DISASSOC: + ipw2100_disassociate_bssid(priv); + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n", + dev->name, command); + ret = -EOPNOTSUPP; + } + + return ret; +} + + +void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv, + char *wpa_ie, int wpa_ie_len){ + + struct ipw2100_wpa_assoc_frame frame; + + frame.fixed_ie_mask = 0; + + /* copy WPA IE */ + memcpy(frame.var_ie, wpa_ie, wpa_ie_len); + frame.var_ie_len = wpa_ie_len; + + /* make sure WPA is enabled */ + ipw2100_wpa_enable(priv, 1); + ipw2100_set_wpa_ie(priv, &frame, 0); +} + + +static int ipw2100_wpa_set_wpa_ie(struct net_device *dev, + struct ipw2100_param *param, int plen){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee; + u8 *buf; + + if (! ieee->wpa_enabled) + return -EOPNOTSUPP; + + if (param->u.wpa_ie.len > MAX_WPA_IE_LEN || + (param->u.wpa_ie.len && + param->u.wpa_ie.data==NULL)) + return -EINVAL; + + if (param->u.wpa_ie.len){ + buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len); + + kfree(ieee->wpa_ie); + ieee->wpa_ie = buf; + ieee->wpa_ie_len = param->u.wpa_ie.len; + + } else { + kfree(ieee->wpa_ie); + ieee->wpa_ie = NULL; + ieee->wpa_ie_len = 0; + } + + ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len); + + return 0; +} + +/* implementation borrowed from hostap driver */ + +static int ipw2100_wpa_set_encryption(struct net_device *dev, + struct ipw2100_param *param, int param_len){ + + int ret = 0; + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_crypto_ops *ops; + struct ieee80211_crypt_data **crypt; + + struct ieee80211_security sec = { + .flags = 0, + }; + + param->u.crypt.err = 0; + param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0'; + + if (param_len != + (int) ((char *) param->u.crypt.key - (char *) param) + + param->u.crypt.key_len){ + IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len); + return -EINVAL; + } + if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && + param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && + param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { + if (param->u.crypt.idx >= WEP_KEYS) + return -EINVAL; + crypt = &ieee->crypt[param->u.crypt.idx]; + } else { + return -EINVAL; + } + + if (strcmp(param->u.crypt.alg, "none") == 0) { + if (crypt){ + sec.enabled = 0; + sec.level = SEC_LEVEL_0; + sec.flags |= SEC_ENABLED | SEC_LEVEL; + ieee80211_crypt_delayed_deinit(ieee, crypt); + } + goto done; + } + sec.enabled = 1; + sec.flags |= SEC_ENABLED; + + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { + request_module("ieee80211_crypt_wep"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { + request_module("ieee80211_crypt_tkip"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { + request_module("ieee80211_crypt_ccmp"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } + if (ops == NULL) { + IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n", + dev->name, param->u.crypt.alg); + param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG; + ret = -EINVAL; + goto done; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct ieee80211_crypt_data *new_crypt; + + ieee80211_crypt_delayed_deinit(ieee, crypt); + + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ops; + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); + + if (new_crypt->priv == NULL) { + kfree(new_crypt); + param->u.crypt.err = + IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED; + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(param->u.crypt.key, + param->u.crypt.key_len, param->u.crypt.seq, + (*crypt)->priv) < 0) { + IPW_DEBUG_INFO("%s: key setting failed\n", + dev->name); + param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + + if (param->u.crypt.set_tx){ + ieee->tx_keyidx = param->u.crypt.idx; + sec.active_key = param->u.crypt.idx; + sec.flags |= SEC_ACTIVE_KEY; + } + + if (ops->name != NULL){ + + if (strcmp(ops->name, "WEP") == 0) { + memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len); + sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len; + sec.flags |= (1 << param->u.crypt.idx); + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_1; + } else if (strcmp(ops->name, "TKIP") == 0) { + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_2; + } else if (strcmp(ops->name, "CCMP") == 0) { + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_3; + } + } + done: + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + + /* Do not reset port if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. If your hardware requires a reset after WEP + * configuration (for example... Prism2), implement the reset_port in + * the callbacks structures used to initialize the 802.11 stack. */ + if (ieee->reset_on_keychange && + ieee->iw_mode != IW_MODE_INFRA && + ieee->reset_port && + ieee->reset_port(dev)) { + IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name); + param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED; + return -EINVAL; + } + + return ret; +} + + +static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){ + + struct ipw2100_param *param; + int ret=0; + + IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length); + + if (p->length < sizeof(struct ipw2100_param) || !p->pointer) + return -EINVAL; + + param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)){ + kfree(param); + return -EFAULT; + } + + switch (param->cmd){ + + case IPW2100_CMD_SET_WPA_PARAM: + ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name, + param->u.wpa_param.value); + break; + + case IPW2100_CMD_SET_WPA_IE: + ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length); + break; + + case IPW2100_CMD_SET_ENCRYPTION: + ret = ipw2100_wpa_set_encryption(dev, param, p->length); + break; + + case IPW2100_CMD_MLME: + ret = ipw2100_wpa_mlme(dev, param->u.mlme.command, + param->u.mlme.reason_code); + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA supplicant request: %d\n", + dev->name, param->cmd); + ret = -EOPNOTSUPP; + + } + + if (ret == 0 && copy_to_user(p->pointer, param, p->length)) + ret = -EFAULT; + + kfree(param); + return ret; +} +#endif /* CONFIG_IEEE80211_WPA */ + +static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ +#ifdef CONFIG_IEEE80211_WPA + struct iwreq *wrq = (struct iwreq *) rq; + int ret=-1; + switch (cmd){ + case IPW2100_IOCTL_WPA_SUPPLICANT: + ret = ipw2100_wpa_supplicant(dev, &wrq->u.data); + return ret; + + default: + return -EOPNOTSUPP; + } + +#endif /* CONFIG_IEEE80211_WPA */ + + return -EOPNOTSUPP; +} + + +static void ipw_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + char fw_ver[64], ucode_ver[64]; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + + ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver)); + ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver)); + + snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", + fw_ver, priv->eeprom_version, ucode_ver); + + strcpy(info->bus_info, pci_name(priv->pci_dev)); +} + +static u32 ipw2100_ethtool_get_link(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + return (priv->status & STATUS_ASSOCIATED) ? 1 : 0; +} + + +static struct ethtool_ops ipw2100_ethtool_ops = { + .get_link = ipw2100_ethtool_get_link, + .get_drvinfo = ipw_ethtool_get_drvinfo, +}; + +static void ipw2100_hang_check(void *adapter) +{ + struct ipw2100_priv *priv = adapter; + unsigned long flags; + u32 rtc = 0xa5a5a5a5; + u32 len = sizeof(rtc); + int restart = 0; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->fatal_error != 0) { + /* If fatal_error is set then we need to restart */ + IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n", + priv->net_dev->name); + + restart = 1; + } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) || + (rtc == priv->last_rtc)) { + /* Check if firmware is hung */ + IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n", + priv->net_dev->name); + + restart = 1; + } + + if (restart) { + /* Kill timer */ + priv->stop_hang_check = 1; + priv->hangs++; + + /* Restart the NIC */ + schedule_reset(priv); + } + + priv->last_rtc = rtc; + + if (!priv->stop_hang_check) + queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2); + + spin_unlock_irqrestore(&priv->low_lock, flags); +} + + +static void ipw2100_rf_kill(void *adapter) +{ + struct ipw2100_priv *priv = adapter; + unsigned long flags; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n"); + if (!priv->stop_rf_kill) + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); + goto exit_unlock; + } + + /* RF Kill is now disabled, so bring the device back up */ + + if (!(priv->status & STATUS_RF_KILL_MASK)) { + IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " + "device\n"); + schedule_reset(priv); + } else + IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " + "enabled\n"); + + exit_unlock: + spin_unlock_irqrestore(&priv->low_lock, flags); +} + +static void ipw2100_irq_tasklet(struct ipw2100_priv *priv); + +/* Look into using netdev destructor to shutdown ieee80211? */ + +static struct net_device *ipw2100_alloc_device( + struct pci_dev *pci_dev, + char *base_addr, + unsigned long mem_start, + unsigned long mem_len) +{ + struct ipw2100_priv *priv; + struct net_device *dev; + + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); + if (!dev) + return NULL; + priv = ieee80211_priv(dev); + priv->ieee = netdev_priv(dev); + priv->pci_dev = pci_dev; + priv->net_dev = dev; + + priv->ieee->hard_start_xmit = ipw2100_tx; + priv->ieee->set_security = shim__set_security; + + dev->open = ipw2100_open; + dev->stop = ipw2100_close; + dev->init = ipw2100_net_init; + dev->do_ioctl = ipw2100_ioctl; + dev->get_stats = ipw2100_stats; + dev->ethtool_ops = &ipw2100_ethtool_ops; + dev->tx_timeout = ipw2100_tx_timeout; + dev->wireless_handlers = &ipw2100_wx_handler_def; + dev->get_wireless_stats = ipw2100_wx_wireless_stats; + dev->set_mac_address = ipw2100_set_address; + dev->watchdog_timeo = 3*HZ; + dev->irq = 0; + + dev->base_addr = (unsigned long)base_addr; + dev->mem_start = mem_start; + dev->mem_end = dev->mem_start + mem_len - 1; + + /* NOTE: We don't use the wireless_handlers hook + * in dev as the system will start throwing WX requests + * to us before we're actually initialized and it just + * ends up causing problems. So, we just handle + * the WX extensions through the ipw2100_ioctl interface */ + + + /* memset() puts everything to 0, so we only have explicitely set + * those values that need to be something else */ + + /* If power management is turned on, default to AUTO mode */ + priv->power_mode = IPW_POWER_AUTO; + + + +#ifdef CONFIG_IEEE80211_WPA + priv->ieee->wpa_enabled = 0; + priv->ieee->tkip_countermeasures = 0; + priv->ieee->drop_unencrypted = 0; + priv->ieee->privacy_invoked = 0; + priv->ieee->ieee802_1x = 1; +#endif /* CONFIG_IEEE80211_WPA */ + + /* Set module parameters */ + switch (mode) { + case 1: + priv->ieee->iw_mode = IW_MODE_ADHOC; + break; +#ifdef CONFIG_IPW2100_MONITOR + case 2: + priv->ieee->iw_mode = IW_MODE_MONITOR; + break; +#endif + default: + case 0: + priv->ieee->iw_mode = IW_MODE_INFRA; + break; + } + + if (disable == 1) + priv->status |= STATUS_RF_KILL_SW; + + if (channel != 0 && + ((channel >= REG_MIN_CHANNEL) && + (channel <= REG_MAX_CHANNEL))) { + priv->config |= CFG_STATIC_CHANNEL; + priv->channel = channel; + } + + if (associate) + priv->config |= CFG_ASSOCIATE; + + priv->beacon_interval = DEFAULT_BEACON_INTERVAL; + priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT; + priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT; + priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED; + priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED; + priv->tx_power = IPW_TX_POWER_DEFAULT; + priv->tx_rates = DEFAULT_TX_RATES; + + strcpy(priv->nick, "ipw2100"); + + spin_lock_init(&priv->low_lock); + sema_init(&priv->action_sem, 1); + sema_init(&priv->adapter_sem, 1); + + init_waitqueue_head(&priv->wait_command_queue); + + netif_carrier_off(dev); + + INIT_LIST_HEAD(&priv->msg_free_list); + INIT_LIST_HEAD(&priv->msg_pend_list); + INIT_STAT(&priv->msg_free_stat); + INIT_STAT(&priv->msg_pend_stat); + + INIT_LIST_HEAD(&priv->tx_free_list); + INIT_LIST_HEAD(&priv->tx_pend_list); + INIT_STAT(&priv->tx_free_stat); + INIT_STAT(&priv->tx_pend_stat); + + INIT_LIST_HEAD(&priv->fw_pend_list); + INIT_STAT(&priv->fw_pend_stat); + + +#ifdef CONFIG_SOFTWARE_SUSPEND2 + priv->workqueue = create_workqueue(DRV_NAME, 0); +#else + priv->workqueue = create_workqueue(DRV_NAME); +#endif + INIT_WORK(&priv->reset_work, + (void (*)(void *))ipw2100_reset_adapter, priv); + INIT_WORK(&priv->security_work, + (void (*)(void *))ipw2100_security_work, priv); + INIT_WORK(&priv->wx_event_work, + (void (*)(void *))ipw2100_wx_event_work, priv); + INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv); + INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv); + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + ipw2100_irq_tasklet, (unsigned long)priv); + + /* NOTE: We do not start the deferred work for status checks yet */ + priv->stop_rf_kill = 1; + priv->stop_hang_check = 1; + + return dev; +} + +static int ipw2100_pci_init_one(struct pci_dev *pci_dev, + const struct pci_device_id *ent) +{ + unsigned long mem_start, mem_len, mem_flags; + char *base_addr = NULL; + struct net_device *dev = NULL; + struct ipw2100_priv *priv = NULL; + int err = 0; + int registered = 0; + u32 val; + + IPW_DEBUG_INFO("enter\n"); + + mem_start = pci_resource_start(pci_dev, 0); + mem_len = pci_resource_len(pci_dev, 0); + mem_flags = pci_resource_flags(pci_dev, 0); + + if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) { + IPW_DEBUG_INFO("weird - resource type is not memory\n"); + err = -ENODEV; + goto fail; + } + + base_addr = ioremap_nocache(mem_start, mem_len); + if (!base_addr) { + printk(KERN_WARNING DRV_NAME + "Error calling ioremap_nocache.\n"); + err = -EIO; + goto fail; + } + + /* allocate and initialize our net_device */ + dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len); + if (!dev) { + printk(KERN_WARNING DRV_NAME + "Error calling ipw2100_alloc_device.\n"); + err = -ENOMEM; + goto fail; + } + + /* set up PCI mappings for device */ + err = pci_enable_device(pci_dev); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_enable_device.\n"); + return err; + } + + priv = ieee80211_priv(dev); + + pci_set_master(pci_dev); + pci_set_drvdata(pci_dev, priv); + + err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_set_dma_mask.\n"); + pci_disable_device(pci_dev); + return err; + } + + err = pci_request_regions(pci_dev, DRV_NAME); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_request_regions.\n"); + pci_disable_device(pci_dev); + return err; + } + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(pci_dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); + + pci_set_power_state(pci_dev, PCI_D0); + + if (!ipw2100_hw_is_adapter_in_system(dev)) { + printk(KERN_WARNING DRV_NAME + "Device not found via register read.\n"); + err = -ENODEV; + goto fail; + } + + SET_NETDEV_DEV(dev, &pci_dev->dev); + + /* Force interrupts to be shut off on the device */ + priv->status |= STATUS_INT_ENABLED; + ipw2100_disable_interrupts(priv); + + /* Allocate and initialize the Tx/Rx queues and lists */ + if (ipw2100_queues_allocate(priv)) { + printk(KERN_WARNING DRV_NAME + "Error calilng ipw2100_queues_allocate.\n"); + err = -ENOMEM; + goto fail; + } + ipw2100_queues_initialize(priv); + + err = request_irq(pci_dev->irq, + ipw2100_interrupt, SA_SHIRQ, + dev->name, priv); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling request_irq: %d.\n", + pci_dev->irq); + goto fail; + } + dev->irq = pci_dev->irq; + + IPW_DEBUG_INFO("Attempting to register device...\n"); + + SET_MODULE_OWNER(dev); + + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2100 Network Connection\n"); + + /* Bring up the interface. Pre 0.46, after we registered the + * network device we would call ipw2100_up. This introduced a race + * condition with newer hotplug configurations (network was coming + * up and making calls before the device was initialized). + * + * If we called ipw2100_up before we registered the device, then the + * device name wasn't registered. So, we instead use the net_dev->init + * member to call a function that then just turns and calls ipw2100_up. + * net_dev->init is called after name allocation but before the + * notifier chain is called */ + down(&priv->action_sem); + err = register_netdev(dev); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling register_netdev.\n"); + goto fail_unlock; + } + registered = 1; + + IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); + + /* perform this after register_netdev so that dev->name is set */ + sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + netif_carrier_off(dev); + + /* If the RF Kill switch is disabled, go ahead and complete the + * startup sequence */ + if (!(priv->status & STATUS_RF_KILL_MASK)) { + /* Enable the adapter - sends HOST_COMPLETE */ + if (ipw2100_enable_adapter(priv)) { + printk(KERN_WARNING DRV_NAME + ": %s: failed in call to enable adapter.\n", + priv->net_dev->name); + ipw2100_hw_stop_adapter(priv); + err = -EIO; + goto fail_unlock; + } + + /* Start a scan . . . */ + ipw2100_set_scan_options(priv); + ipw2100_start_scan(priv); + } + + IPW_DEBUG_INFO("exit\n"); + + priv->status |= STATUS_INITIALIZED; + + up(&priv->action_sem); + + return 0; + + fail_unlock: + up(&priv->action_sem); + + fail: + if (dev) { + if (registered) + unregister_netdev(dev); + + ipw2100_hw_stop_adapter(priv); + + ipw2100_disable_interrupts(priv); + + if (dev->irq) + free_irq(dev->irq, priv); + + ipw2100_kill_workqueue(priv); + + /* These are safe to call even if they weren't allocated */ + ipw2100_queues_free(priv); + sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + + free_ieee80211(dev); + pci_set_drvdata(pci_dev, NULL); + } + + if (base_addr) + iounmap((char*)base_addr); + + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + + return err; +} + +static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev; + + if (priv) { + down(&priv->action_sem); + + priv->status &= ~STATUS_INITIALIZED; + + dev = priv->net_dev; + sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + +#ifdef CONFIG_PM + if (ipw2100_firmware.version) + ipw2100_release_firmware(priv, &ipw2100_firmware); +#endif + /* Take down the hardware */ + ipw2100_down(priv); + + /* Release the semaphore so that the network subsystem can + * complete any needed calls into the driver... */ + up(&priv->action_sem); + + /* Unregister the device first - this results in close() + * being called if the device is open. If we free storage + * first, then close() will crash. */ + unregister_netdev(dev); + + /* ipw2100_down will ensure that there is no more pending work + * in the workqueue's, so we can safely remove them now. */ + ipw2100_kill_workqueue(priv); + + ipw2100_queues_free(priv); + + /* Free potential debugging firmware snapshot */ + ipw2100_snapshot_free(priv); + + if (dev->irq) + free_irq(dev->irq, priv); + + if (dev->base_addr) + iounmap((unsigned char *)dev->base_addr); + + free_ieee80211(dev); + } + + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + + IPW_DEBUG_INFO("exit\n"); +} + + +#ifdef CONFIG_PM +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) +static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state) +#else +static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state) +#endif +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev = priv->net_dev; + + IPW_DEBUG_INFO("%s: Going into suspend...\n", + dev->name); + + down(&priv->action_sem); + if (priv->status & STATUS_INITIALIZED) { + /* Take down the device; powers it off, etc. */ + ipw2100_down(priv); + } + + /* Remove the PRESENT state of the device */ + netif_device_detach(dev); + + pci_save_state(pci_dev); + pci_disable_device (pci_dev); + pci_set_power_state(pci_dev, PCI_D3hot); + + up(&priv->action_sem); + + return 0; +} + +static int ipw2100_resume(struct pci_dev *pci_dev) +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev = priv->net_dev; + u32 val; + + if (IPW2100_PM_DISABLED) + return 0; + + down(&priv->action_sem); + + IPW_DEBUG_INFO("%s: Coming out of suspend...\n", + dev->name); + + pci_set_power_state(pci_dev, PCI_D0); + pci_enable_device(pci_dev); + pci_restore_state(pci_dev); + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries + * from interfering with C3 CPU state. pci_restore_state won't help + * here since it only restores the first 64 bytes pci config header. + */ + pci_read_config_dword(pci_dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); + + /* Set the device back into the PRESENT state; this will also wake + * the queue of needed */ + netif_device_attach(dev); + + /* Bring the device back up */ + if (!(priv->status & STATUS_RF_KILL_SW)) + ipw2100_up(priv, 0); + + up(&priv->action_sem); + + return 0; +} +#endif + + +#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x } + +static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = { + IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */ + IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */ + + IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */ + + IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table); + +static struct pci_driver ipw2100_pci_driver = { + .name = DRV_NAME, + .id_table = ipw2100_pci_id_table, + .probe = ipw2100_pci_init_one, + .remove = __devexit_p(ipw2100_pci_remove_one), +#ifdef CONFIG_PM + .suspend = ipw2100_suspend, + .resume = ipw2100_resume, +#endif +}; + + +/** + * Initialize the ipw2100 driver/module + * + * @returns 0 if ok, < 0 errno node con error. + * + * Note: we cannot init the /proc stuff until the PCI driver is there, + * or we risk an unlikely race condition on someone accessing + * uninitialized data in the PCI dev struct through /proc. + */ +static int __init ipw2100_init(void) +{ + int ret; + + printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); + +#ifdef CONFIG_IEEE80211_NOWEP + IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n"); +#endif + + ret = pci_module_init(&ipw2100_pci_driver); + +#ifdef CONFIG_IPW_DEBUG + ipw2100_debug_level = debug; + driver_create_file(&ipw2100_pci_driver.driver, + &driver_attr_debug_level); +#endif + + return ret; +} + + +/** + * Cleanup ipw2100 driver registration + */ +static void __exit ipw2100_exit(void) +{ + /* FIXME: IPG: check that we have no instances of the devices open */ +#ifdef CONFIG_IPW_DEBUG + driver_remove_file(&ipw2100_pci_driver.driver, + &driver_attr_debug_level); +#endif + pci_unregister_driver(&ipw2100_pci_driver); +} + +module_init(ipw2100_init); +module_exit(ipw2100_exit); + +#define WEXT_USECHANNELS 1 + +static const long ipw2100_frequencies[] = { + 2412, 2417, 2422, 2427, + 2432, 2437, 2442, 2447, + 2452, 2457, 2462, 2467, + 2472, 2484 +}; + +#define FREQ_COUNT (sizeof(ipw2100_frequencies) / \ + sizeof(ipw2100_frequencies[0])) + +static const long ipw2100_rates_11b[] = { + 1000000, + 2000000, + 5500000, + 11000000 +}; + +#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0])) + +static int ipw2100_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b"); + + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + return 0; +} + + +static int ipw2100_wx_set_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_freq *fwrq = &wrqu->freq; + int err = 0; + + if (priv->ieee->iw_mode == IW_MODE_INFRA) + return -EOPNOTSUPP; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + /* if setting by freq convert to channel */ + if (fwrq->e == 1) { + if ((fwrq->m >= (int) 2.412e8 && + fwrq->m <= (int) 2.487e8)) { + int f = fwrq->m / 100000; + int c = 0; + + while ((c < REG_MAX_CHANNEL) && + (f != ipw2100_frequencies[c])) + c++; + + /* hack to fall through */ + fwrq->e = 0; + fwrq->m = c + 1; + } + } + + if (fwrq->e > 0 || fwrq->m > 1000) + return -EOPNOTSUPP; + else { /* Set the channel */ + IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m); + err = ipw2100_set_channel(priv, fwrq->m, 0); + } + + done: + up(&priv->action_sem); + return err; +} + + +static int ipw2100_wx_get_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->freq.e = 0; + + /* If we are associated, trying to associate, or have a statically + * configured CHANNEL then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_CHANNEL || + priv->status & STATUS_ASSOCIATED) + wrqu->freq.m = priv->channel; + else + wrqu->freq.m = 0; + + IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel); + return 0; + +} + +static int ipw2100_wx_set_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode); + + if (wrqu->mode == priv->ieee->iw_mode) + return 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + switch (wrqu->mode) { +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); + break; +#endif /* CONFIG_IPW2100_MONITOR */ + case IW_MODE_ADHOC: + err = ipw2100_switch_mode(priv, IW_MODE_ADHOC); + break; + case IW_MODE_INFRA: + case IW_MODE_AUTO: + default: + err = ipw2100_switch_mode(priv, IW_MODE_INFRA); + break; + } + +done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->mode = priv->ieee->iw_mode; + IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode); + + return 0; +} + + +#define POWER_MODES 5 + +/* Values are in microsecond */ +static const s32 timeout_duration[POWER_MODES] = { + 350000, + 250000, + 75000, + 37000, + 25000, +}; + +static const s32 period_duration[POWER_MODES] = { + 400000, + 700000, + 1000000, + 1000000, + 1000000 +}; + +static int ipw2100_wx_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_range *range = (struct iw_range *)extra; + u16 val; + int i, level; + + wrqu->data.length = sizeof(*range); + memset(range, 0, sizeof(*range)); + + /* Let's try to keep this struct in the same order as in + * linux/include/wireless.h + */ + + /* TODO: See what values we can set, and remove the ones we can't + * set, or fill them with some default data. + */ + + /* ~5 Mb/s real (802.11b) */ + range->throughput = 5 * 1000 * 1000; + +// range->sensitivity; /* signal level threshold range */ + + range->max_qual.qual = 100; + /* TODO: Find real max RSSI and stick here */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + range->max_qual.updated = 7; /* Updated all three */ + + range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ + /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; + range->avg_qual.noise = 0; + range->avg_qual.updated = 7; /* Updated all three */ + + range->num_bitrates = RATE_COUNT; + + for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { + range->bitrate[i] = ipw2100_rates_11b[i]; + } + + range->min_rts = MIN_RTS_THRESHOLD; + range->max_rts = MAX_RTS_THRESHOLD; + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->min_pmp = period_duration[0]; /* Minimal PM period */ + range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */ + range->min_pmt = timeout_duration[POWER_MODES-1]; /* Minimal PM timeout */ + range->max_pmt = timeout_duration[0];/* Maximal PM timeout */ + + /* How to decode max/min PM period */ + range->pmp_flags = IW_POWER_PERIOD; + /* How to decode max/min PM period */ + range->pmt_flags = IW_POWER_TIMEOUT; + /* What PM options are supported */ + range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD; + + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; /* Different token sizes */ + range->num_encoding_sizes = 2; /* Number of entry in the list */ + range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */ +// range->encoding_login_index; /* token index for login token */ + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + range->txpower_capa = IW_TXPOW_DBM; + range->num_txpower = IW_MAX_TXPOWER; + for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER; + i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) / + (IW_MAX_TXPOWER - 1)) + range->txpower[i] = level / 16; + } else { + range->txpower_capa = 0; + range->num_txpower = 0; + } + + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 16; + +// range->retry_capa; /* What retry options are supported */ +// range->retry_flags; /* How to decode max/min retry limit */ +// range->r_time_flags; /* How to decode max/min retry life */ +// range->min_retry; /* Minimal number of retries */ +// range->max_retry; /* Maximal number of retries */ +// range->min_r_time; /* Minimal retry lifetime */ +// range->max_r_time; /* Maximal retry lifetime */ + + range->num_channels = FREQ_COUNT; + + val = 0; + for (i = 0; i < FREQ_COUNT; i++) { + // TODO: Include only legal frequencies for some countries +// if (local->channel_mask & (1 << i)) { + range->freq[val].i = i + 1; + range->freq[val].m = ipw2100_frequencies[i] * 100000; + range->freq[val].e = 1; + val++; +// } + if (val == IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = val; + + IPW_DEBUG_WX("GET Range\n"); + + return 0; +} + +static int ipw2100_wx_set_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + static const unsigned char any[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + static const unsigned char off[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + // sanity checks + if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) + return -EINVAL; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) || + !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) { + /* we disable mandatory BSSID association */ + IPW_DEBUG_WX("exit - disable mandatory BSSID\n"); + priv->config &= ~CFG_STATIC_BSSID; + err = ipw2100_set_mandatory_bssid(priv, NULL, 0); + goto done; + } + + priv->config |= CFG_STATIC_BSSID; + memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN); + + err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0); + + IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n", + wrqu->ap_addr.sa_data[0] & 0xff, + wrqu->ap_addr.sa_data[1] & 0xff, + wrqu->ap_addr.sa_data[2] & 0xff, + wrqu->ap_addr.sa_data[3] & 0xff, + wrqu->ap_addr.sa_data[4] & 0xff, + wrqu->ap_addr.sa_data[5] & 0xff); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + /* If we are associated, trying to associate, or have a statically + * configured BSSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_BSSID || + priv->status & STATUS_ASSOCIATED) { + wrqu->ap_addr.sa_family = ARPHRD_ETHER; + memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN); + } else + memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); + + IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n", + MAC_ARG(wrqu->ap_addr.sa_data)); + return 0; +} + +static int ipw2100_wx_set_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + char *essid = ""; /* ANY */ + int length = 0; + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->essid.flags && wrqu->essid.length) { + length = wrqu->essid.length - 1; + essid = extra; + } + + if (length == 0) { + IPW_DEBUG_WX("Setting ESSID to ANY\n"); + priv->config &= ~CFG_STATIC_ESSID; + err = ipw2100_set_essid(priv, NULL, 0, 0); + goto done; + } + + length = min(length, IW_ESSID_MAX_SIZE); + + priv->config |= CFG_STATIC_ESSID; + + if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) { + IPW_DEBUG_WX("ESSID set to current ESSID.\n"); + err = 0; + goto done; + } + + IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length), + length); + + priv->essid_len = length; + memcpy(priv->essid, essid, priv->essid_len); + + err = ipw2100_set_essid(priv, essid, length, 0); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + /* If we are associated, trying to associate, or have a statically + * configured ESSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_ESSID || + priv->status & STATUS_ASSOCIATED) { + IPW_DEBUG_WX("Getting essid: '%s'\n", + escape_essid(priv->essid, priv->essid_len)); + memcpy(extra, priv->essid, priv->essid_len); + wrqu->essid.length = priv->essid_len; + wrqu->essid.flags = 1; /* active */ + } else { + IPW_DEBUG_WX("Getting essid: ANY\n"); + wrqu->essid.length = 0; + wrqu->essid.flags = 0; /* active */ + } + + return 0; +} + +static int ipw2100_wx_set_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (wrqu->data.length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick)); + memset(priv->nick, 0, sizeof(priv->nick)); + memcpy(priv->nick, extra, wrqu->data.length); + + IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick); + + return 0; +} + +static int ipw2100_wx_get_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->data.length = strlen(priv->nick) + 1; + memcpy(extra, priv->nick, wrqu->data.length); + wrqu->data.flags = 1; /* active */ + + IPW_DEBUG_WX("GET Nickname -> %s \n", extra); + + return 0; +} + +static int ipw2100_wx_set_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + u32 target_rate = wrqu->bitrate.value; + u32 rate; + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + rate = 0; + + if (target_rate == 1000000 || + (!wrqu->bitrate.fixed && target_rate > 1000000)) + rate |= TX_RATE_1_MBIT; + if (target_rate == 2000000 || + (!wrqu->bitrate.fixed && target_rate > 2000000)) + rate |= TX_RATE_2_MBIT; + if (target_rate == 5500000 || + (!wrqu->bitrate.fixed && target_rate > 5500000)) + rate |= TX_RATE_5_5_MBIT; + if (target_rate == 11000000 || + (!wrqu->bitrate.fixed && target_rate > 11000000)) + rate |= TX_RATE_11_MBIT; + if (rate == 0) + rate = DEFAULT_TX_RATES; + + err = ipw2100_set_tx_rates(priv, rate, 0); + + IPW_DEBUG_WX("SET Rate -> %04X \n", rate); + done: + up(&priv->action_sem); + return err; +} + + +static int ipw2100_wx_get_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int val; + int len = sizeof(val); + int err = 0; + + if (!(priv->status & STATUS_ENABLED) || + priv->status & STATUS_RF_KILL_MASK || + !(priv->status & STATUS_ASSOCIATED)) { + wrqu->bitrate.value = 0; + return 0; + } + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); + if (err) { + IPW_DEBUG_WX("failed querying ordinals.\n"); + return err; + } + + switch (val & TX_RATE_MASK) { + case TX_RATE_1_MBIT: + wrqu->bitrate.value = 1000000; + break; + case TX_RATE_2_MBIT: + wrqu->bitrate.value = 2000000; + break; + case TX_RATE_5_5_MBIT: + wrqu->bitrate.value = 5500000; + break; + case TX_RATE_11_MBIT: + wrqu->bitrate.value = 11000000; + break; + default: + wrqu->bitrate.value = 0; + } + + IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_set_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int value, err; + + /* Auto RTS not yet supported */ + if (wrqu->rts.fixed == 0) + return -EINVAL; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->rts.disabled) + value = priv->rts_threshold | RTS_DISABLED; + else { + if (wrqu->rts.value < 1 || + wrqu->rts.value > 2304) { + err = -EINVAL; + goto done; + } + value = wrqu->rts.value; + } + + err = ipw2100_set_rts_threshold(priv, value); + + IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value); + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED; + wrqu->rts.fixed = 1; /* no auto select */ + + /* If RTS is set to the default value, then it is disabled */ + wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0; + + IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value); + + return 0; +} + +static int ipw2100_wx_set_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0, value; + + if (priv->ieee->iw_mode != IW_MODE_ADHOC) + return -EINVAL; + + if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0) + value = IPW_TX_POWER_DEFAULT; + else { + if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM || + wrqu->txpower.value > IPW_TX_POWER_MAX_DBM) + return -EINVAL; + + value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 / + (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM); + } + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + err = ipw2100_set_tx_power(priv, value); + + IPW_DEBUG_WX("SET TX Power -> %d \n", value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (priv->ieee->iw_mode != IW_MODE_ADHOC) { + wrqu->power.disabled = 1; + return 0; + } + + if (priv->tx_power == IPW_TX_POWER_DEFAULT) { + wrqu->power.fixed = 0; + wrqu->power.value = IPW_TX_POWER_MAX_DBM; + wrqu->power.disabled = 1; + } else { + wrqu->power.disabled = 0; + wrqu->power.fixed = 1; + wrqu->power.value = + (priv->tx_power * + (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) / + (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) + + IPW_TX_POWER_MIN_DBM; + } + + wrqu->power.flags = IW_TXPOW_DBM; + + IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value); + + return 0; +} + +static int ipw2100_wx_set_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (!wrqu->frag.fixed) + return -EINVAL; + + if (wrqu->frag.disabled) { + priv->frag_threshold |= FRAG_DISABLED; + priv->ieee->fts = DEFAULT_FTS; + } else { + if (wrqu->frag.value < MIN_FRAG_THRESHOLD || + wrqu->frag.value > MAX_FRAG_THRESHOLD) + return -EINVAL; + + priv->ieee->fts = wrqu->frag.value & ~0x1; + priv->frag_threshold = priv->ieee->fts; + } + + IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts); + + return 0; +} + +static int ipw2100_wx_get_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED; + wrqu->frag.fixed = 0; /* no auto select */ + wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0; + + IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value); + + return 0; +} + +static int ipw2100_wx_set_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + if (wrqu->retry.flags & IW_RETRY_LIFETIME || + wrqu->retry.disabled) + return -EINVAL; + + if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) + return 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->retry.flags & IW_RETRY_MIN) { + err = ipw2100_set_short_retry(priv, wrqu->retry.value); + IPW_DEBUG_WX("SET Short Retry Limit -> %d \n", + wrqu->retry.value); + goto done; + } + + if (wrqu->retry.flags & IW_RETRY_MAX) { + err = ipw2100_set_long_retry(priv, wrqu->retry.value); + IPW_DEBUG_WX("SET Long Retry Limit -> %d \n", + wrqu->retry.value); + goto done; + } + + err = ipw2100_set_short_retry(priv, wrqu->retry.value); + if (!err) + err = ipw2100_set_long_retry(priv, wrqu->retry.value); + + IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->retry.disabled = 0; /* can't be disabled */ + + if ((wrqu->retry.flags & IW_RETRY_TYPE) == + IW_RETRY_LIFETIME) + return -EINVAL; + + if (wrqu->retry.flags & IW_RETRY_MAX) { + wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX; + wrqu->retry.value = priv->long_retry_limit; + } else { + wrqu->retry.flags = + (priv->short_retry_limit != + priv->long_retry_limit) ? + IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT; + + wrqu->retry.value = priv->short_retry_limit; + } + + IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value); + + return 0; +} + +static int ipw2100_wx_set_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + IPW_DEBUG_WX("Initiating scan...\n"); + if (ipw2100_set_scan_options(priv) || + ipw2100_start_scan(priv)) { + IPW_DEBUG_WX("Start scan failed.\n"); + + /* TODO: Mark a scan as pending so when hardware initialized + * a scan starts */ + } + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra); +} + + +/* + * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c + */ +static int ipw2100_wx_set_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + /* + * No check of STATUS_INITIALIZED required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key); +} + +static int ipw2100_wx_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key); +} + +static int ipw2100_wx_set_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->power.disabled) { + priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); + err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); + IPW_DEBUG_WX("SET Power Management Mode -> off\n"); + goto done; + } + + switch (wrqu->power.flags & IW_POWER_MODE) { + case IW_POWER_ON: /* If not specified */ + case IW_POWER_MODE: /* If set all mask */ + case IW_POWER_ALL_R: /* If explicitely state all */ + break; + default: /* Otherwise we don't support it */ + IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", + wrqu->power.flags); + err = -EOPNOTSUPP; + goto done; + } + + /* If the user hasn't specified a power management mode yet, default + * to BATTERY */ + priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; + err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); + + IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", + priv->power_mode); + + done: + up(&priv->action_sem); + return err; + +} + +static int ipw2100_wx_get_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (!(priv->power_mode & IPW_POWER_ENABLED)) { + wrqu->power.disabled = 1; + } else { + wrqu->power.disabled = 0; + wrqu->power.flags = 0; + } + + IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode); + + return 0; +} + + +/* + * + * IWPRIV handlers + * + */ +#ifdef CONFIG_IPW2100_MONITOR +static int ipw2100_wx_set_promisc(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int *parms = (int *)extra; + int enable = (parms[0] > 0); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (enable) { + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + err = ipw2100_set_channel(priv, parms[1], 0); + goto done; + } + priv->channel = parms[1]; + err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); + } else { + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + err = ipw2100_switch_mode(priv, priv->last_mode); + } + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_reset(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + if (priv->status & STATUS_INITIALIZED) + schedule_reset(priv); + return 0; +} + +#endif + +static int ipw2100_wx_set_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0, mode = *(int *)extra; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if ((mode < 1) || (mode > POWER_MODES)) + mode = IPW_POWER_AUTO; + + if (priv->power_mode != mode) + err = ipw2100_set_power_mode(priv, mode); + done: + up(&priv->action_sem); + return err; +} + +#define MAX_POWER_STRING 80 +static int ipw2100_wx_get_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int level = IPW_POWER_LEVEL(priv->power_mode); + s32 timeout, period; + + if (!(priv->power_mode & IPW_POWER_ENABLED)) { + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (Off)", level); + } else { + switch (level) { + case IPW_POWER_MODE_CAM: + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (None)", level); + break; + case IPW_POWER_AUTO: + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (Auto)", 0); + break; + default: + timeout = timeout_duration[level - 1] / 1000; + period = period_duration[level - 1] / 1000; + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d " + "(Timeout %dms, Period %dms)", + level, timeout, period); + } + } + + wrqu->data.length = strlen(extra) + 1; + + return 0; +} + + +static int ipw2100_wx_set_preamble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err, mode = *(int *)extra; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (mode == 1) + priv->config |= CFG_LONG_PREAMBLE; + else if (mode == 0) + priv->config &= ~CFG_LONG_PREAMBLE; + else { + err = -EINVAL; + goto done; + } + + err = ipw2100_system_config(priv, 0); + +done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_preamble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (priv->config & CFG_LONG_PREAMBLE) + snprintf(wrqu->name, IFNAMSIZ, "long (1)"); + else + snprintf(wrqu->name, IFNAMSIZ, "auto (0)"); + + return 0; +} + +static iw_handler ipw2100_wx_handlers[] = +{ + NULL, /* SIOCSIWCOMMIT */ + ipw2100_wx_get_name, /* SIOCGIWNAME */ + NULL, /* SIOCSIWNWID */ + NULL, /* SIOCGIWNWID */ + ipw2100_wx_set_freq, /* SIOCSIWFREQ */ + ipw2100_wx_get_freq, /* SIOCGIWFREQ */ + ipw2100_wx_set_mode, /* SIOCSIWMODE */ + ipw2100_wx_get_mode, /* SIOCGIWMODE */ + NULL, /* SIOCSIWSENS */ + NULL, /* SIOCGIWSENS */ + NULL, /* SIOCSIWRANGE */ + ipw2100_wx_get_range, /* SIOCGIWRANGE */ + NULL, /* SIOCSIWPRIV */ + NULL, /* SIOCGIWPRIV */ + NULL, /* SIOCSIWSTATS */ + NULL, /* SIOCGIWSTATS */ + NULL, /* SIOCSIWSPY */ + NULL, /* SIOCGIWSPY */ + NULL, /* SIOCGIWTHRSPY */ + NULL, /* SIOCWIWTHRSPY */ + ipw2100_wx_set_wap, /* SIOCSIWAP */ + ipw2100_wx_get_wap, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST -- deprecated */ + ipw2100_wx_set_scan, /* SIOCSIWSCAN */ + ipw2100_wx_get_scan, /* SIOCGIWSCAN */ + ipw2100_wx_set_essid, /* SIOCSIWESSID */ + ipw2100_wx_get_essid, /* SIOCGIWESSID */ + ipw2100_wx_set_nick, /* SIOCSIWNICKN */ + ipw2100_wx_get_nick, /* SIOCGIWNICKN */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + ipw2100_wx_set_rate, /* SIOCSIWRATE */ + ipw2100_wx_get_rate, /* SIOCGIWRATE */ + ipw2100_wx_set_rts, /* SIOCSIWRTS */ + ipw2100_wx_get_rts, /* SIOCGIWRTS */ + ipw2100_wx_set_frag, /* SIOCSIWFRAG */ + ipw2100_wx_get_frag, /* SIOCGIWFRAG */ + ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */ + ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */ + ipw2100_wx_set_retry, /* SIOCSIWRETRY */ + ipw2100_wx_get_retry, /* SIOCGIWRETRY */ + ipw2100_wx_set_encode, /* SIOCSIWENCODE */ + ipw2100_wx_get_encode, /* SIOCGIWENCODE */ + ipw2100_wx_set_power, /* SIOCSIWPOWER */ + ipw2100_wx_get_power, /* SIOCGIWPOWER */ +}; + +#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV +#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1 +#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2 +#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3 +#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4 +#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5 + +static const struct iw_priv_args ipw2100_private_args[] = { + +#ifdef CONFIG_IPW2100_MONITOR + { + IPW2100_PRIV_SET_MONITOR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor" + }, + { + IPW2100_PRIV_RESET, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset" + }, +#endif /* CONFIG_IPW2100_MONITOR */ + + { + IPW2100_PRIV_SET_POWER, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power" + }, + { + IPW2100_PRIV_GET_POWER, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power" + }, + { + IPW2100_PRIV_SET_LONGPREAMBLE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble" + }, + { + IPW2100_PRIV_GET_LONGPREAMBLE, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble" + }, +}; + +static iw_handler ipw2100_private_handler[] = { +#ifdef CONFIG_IPW2100_MONITOR + ipw2100_wx_set_promisc, + ipw2100_wx_reset, +#else /* CONFIG_IPW2100_MONITOR */ + NULL, + NULL, +#endif /* CONFIG_IPW2100_MONITOR */ + ipw2100_wx_set_powermode, + ipw2100_wx_get_powermode, + ipw2100_wx_set_preamble, + ipw2100_wx_get_preamble, +}; + +static struct iw_handler_def ipw2100_wx_handler_def = +{ + .standard = ipw2100_wx_handlers, + .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler), + .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(ipw2100_private_args) / + sizeof(struct iw_priv_args), + .private = (iw_handler *)ipw2100_private_handler, + .private_args = (struct iw_priv_args *)ipw2100_private_args, +}; + +/* + * Get wireless statistics. + * Called by /proc/net/wireless + * Also called by SIOCGIWSTATS + */ +static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev) +{ + enum { + POOR = 30, + FAIR = 60, + GOOD = 80, + VERY_GOOD = 90, + EXCELLENT = 95, + PERFECT = 100 + }; + int rssi_qual; + int tx_qual; + int beacon_qual; + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_statistics *wstats; + u32 rssi, quality, tx_retries, missed_beacons, tx_failures; + u32 ord_len = sizeof(u32); + + if (!priv) + return (struct iw_statistics *) NULL; + + wstats = &priv->wstats; + + /* if hw is disabled, then ipw2100_get_ordinal() can't be called. + * ipw2100_wx_wireless_stats seems to be called before fw is + * initialized. STATUS_ASSOCIATED will only be set if the hw is up + * and associated; if not associcated, the values are all meaningless + * anyway, so set them all to NULL and INVALID */ + if (!(priv->status & STATUS_ASSOCIATED)) { + wstats->miss.beacon = 0; + wstats->discard.retries = 0; + wstats->qual.qual = 0; + wstats->qual.level = 0; + wstats->qual.noise = 0; + wstats->qual.updated = 7; + wstats->qual.updated |= IW_QUAL_NOISE_INVALID | + IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; + return wstats; + } + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS, + &missed_beacons, &ord_len)) + goto fail_get_ordinal; + + /* If we don't have a connection the quality and level is 0*/ + if (!(priv->status & STATUS_ASSOCIATED)) { + wstats->qual.qual = 0; + wstats->qual.level = 0; + } else { + if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR, + &rssi, &ord_len)) + goto fail_get_ordinal; + wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; + if (rssi < 10) + rssi_qual = rssi * POOR / 10; + else if (rssi < 15) + rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR; + else if (rssi < 20) + rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR; + else if (rssi < 30) + rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) / + 10 + GOOD; + else + rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) / + 10 + VERY_GOOD; + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES, + &tx_retries, &ord_len)) + goto fail_get_ordinal; + + if (tx_retries > 75) + tx_qual = (90 - tx_retries) * POOR / 15; + else if (tx_retries > 70) + tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR; + else if (tx_retries > 65) + tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR; + else if (tx_retries > 50) + tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) / + 15 + GOOD; + else + tx_qual = (50 - tx_retries) * + (PERFECT - VERY_GOOD) / 50 + VERY_GOOD; + + if (missed_beacons > 50) + beacon_qual = (60 - missed_beacons) * POOR / 10; + else if (missed_beacons > 40) + beacon_qual = (50 - missed_beacons) * (FAIR - POOR) / + 10 + POOR; + else if (missed_beacons > 32) + beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) / + 18 + FAIR; + else if (missed_beacons > 20) + beacon_qual = (32 - missed_beacons) * + (VERY_GOOD - GOOD) / 20 + GOOD; + else + beacon_qual = (20 - missed_beacons) * + (PERFECT - VERY_GOOD) / 20 + VERY_GOOD; + + quality = min(beacon_qual, min(tx_qual, rssi_qual)); + +#ifdef CONFIG_IPW_DEBUG + if (beacon_qual == quality) + IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); + else if (tx_qual == quality) + IPW_DEBUG_WX("Quality clamped by Tx Retries\n"); + else if (quality != 100) + IPW_DEBUG_WX("Quality clamped by Signal Strength\n"); + else + IPW_DEBUG_WX("Quality not clamped.\n"); +#endif + + wstats->qual.qual = quality; + wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; + } + + wstats->qual.noise = 0; + wstats->qual.updated = 7; + wstats->qual.updated |= IW_QUAL_NOISE_INVALID; + + /* FIXME: this is percent and not a # */ + wstats->miss.beacon = missed_beacons; + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES, + &tx_failures, &ord_len)) + goto fail_get_ordinal; + wstats->discard.retries = tx_failures; + + return wstats; + + fail_get_ordinal: + IPW_DEBUG_WX("failed querying ordinals.\n"); + + return (struct iw_statistics *) NULL; +} + +static void ipw2100_wx_event_work(struct ipw2100_priv *priv) +{ + union iwreq_data wrqu; + int len = ETH_ALEN; + + if (priv->status & STATUS_STOPPING) + return; + + down(&priv->action_sem); + + IPW_DEBUG_WX("enter\n"); + + up(&priv->action_sem); + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Fetch BSSID from the hardware */ + if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) || + priv->status & STATUS_RF_KILL_MASK || + ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, + &priv->bssid, &len)) { + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + } else { + /* We now have the BSSID, so can finish setting to the full + * associated state */ + memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); + memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN); + priv->status &= ~STATUS_ASSOCIATING; + priv->status |= STATUS_ASSOCIATED; + netif_carrier_on(priv->net_dev); + if (netif_queue_stopped(priv->net_dev)) { + IPW_DEBUG_INFO("Waking net queue.\n"); + netif_wake_queue(priv->net_dev); + } else { + IPW_DEBUG_INFO("Starting net queue.\n"); + netif_start_queue(priv->net_dev); + } + } + + if (!(priv->status & STATUS_ASSOCIATED)) { + IPW_DEBUG_WX("Configuring ESSID\n"); + down(&priv->action_sem); + /* This is a disassociation event, so kick the firmware to + * look for another AP */ + if (priv->config & CFG_STATIC_ESSID) + ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0); + else + ipw2100_set_essid(priv, NULL, 0, 0); + up(&priv->action_sem); + } + + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); +} + +#define IPW2100_FW_MAJOR_VERSION 1 +#define IPW2100_FW_MINOR_VERSION 3 + +#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8) +#define IPW2100_FW_MAJOR(x) (x & 0xff) + +#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \ + IPW2100_FW_MAJOR_VERSION) + +#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \ +"." __stringify(IPW2100_FW_MINOR_VERSION) + +#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw" + + +/* + +BINARY FIRMWARE HEADER FORMAT + +offset length desc +0 2 version +2 2 mode == 0:BSS,1:IBSS,2:MONITOR +4 4 fw_len +8 4 uc_len +C fw_len firmware data +12 + fw_len uc_len microcode data + +*/ + +struct ipw2100_fw_header { + short version; + short mode; + unsigned int fw_size; + unsigned int uc_size; +} __attribute__ ((packed)); + + + +static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw) +{ + struct ipw2100_fw_header *h = + (struct ipw2100_fw_header *)fw->fw_entry->data; + + if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { + printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " + "(detected version id of %u). " + "See Documentation/networking/README.ipw2100\n", + h->version); + return 1; + } + + fw->version = h->version; + fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header); + fw->fw.size = h->fw_size; + fw->uc.data = fw->fw.data + h->fw_size; + fw->uc.size = h->uc_size; + + return 0; +} + + +static int ipw2100_get_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + char *fw_name; + int rc; + + IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n", + priv->net_dev->name); + + switch (priv->ieee->iw_mode) { + case IW_MODE_ADHOC: + fw_name = IPW2100_FW_NAME("-i"); + break; +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + fw_name = IPW2100_FW_NAME("-p"); + break; +#endif + case IW_MODE_INFRA: + default: + fw_name = IPW2100_FW_NAME(""); + break; + } + + rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); + + if (rc < 0) { + printk(KERN_ERR DRV_NAME ": " + "%s: Firmware '%s' not available or load failed.\n", + priv->net_dev->name, fw_name); + return rc; + } + IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, + fw->fw_entry->size); + + ipw2100_mod_firmware_load(fw); + + return 0; +} + +static void ipw2100_release_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + fw->version = 0; + if (fw->fw_entry) + release_firmware(fw->fw_entry); + fw->fw_entry = NULL; +} + + +static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, + size_t max) +{ + char ver[MAX_FW_VERSION_LEN]; + u32 len = MAX_FW_VERSION_LEN; + u32 tmp; + int i; + /* firmware version is an ascii string (max len of 14) */ + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, + ver, &len)) + return -EIO; + tmp = max; + if (len >= max) + len = max - 1; + for (i = 0; i < len; i++) + buf[i] = ver[i]; + buf[i] = '\0'; + return tmp; +} + +static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, + size_t max) +{ + u32 ver; + u32 len = sizeof(ver); + /* microcode version is a 32 bit integer */ + if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, + &ver, &len)) + return -EIO; + return snprintf(buf, max, "%08X", ver); +} + +/* + * On exit, the firmware will have been freed from the fw list + */ +static int ipw2100_fw_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + /* firmware is constructed of N contiguous entries, each entry is + * structured as: + * + * offset sie desc + * 0 4 address to write to + * 4 2 length of data run + * 6 length data + */ + unsigned int addr; + unsigned short len; + + const unsigned char *firmware_data = fw->fw.data; + unsigned int firmware_data_left = fw->fw.size; + + while (firmware_data_left > 0) { + addr = *(u32 *)(firmware_data); + firmware_data += 4; + firmware_data_left -= 4; + + len = *(u16 *)(firmware_data); + firmware_data += 2; + firmware_data_left -= 2; + + if (len > 32) { + printk(KERN_ERR DRV_NAME ": " + "Invalid firmware run-length of %d bytes\n", + len); + return -EINVAL; + } + + write_nic_memory(priv->net_dev, addr, len, firmware_data); + firmware_data += len; + firmware_data_left -= len; + } + + return 0; +} + +struct symbol_alive_response { + u8 cmd_id; + u8 seq_num; + u8 ucode_rev; + u8 eeprom_valid; + u16 valid_flags; + u8 IEEE_addr[6]; + u16 flags; + u16 pcb_rev; + u16 clock_settle_time; // 1us LSB + u16 powerup_settle_time; // 1us LSB + u16 hop_settle_time; // 1us LSB + u8 date[3]; // month, day, year + u8 time[2]; // hours, minutes + u8 ucode_valid; +}; + +static int ipw2100_ucode_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + struct net_device *dev = priv->net_dev; + const unsigned char *microcode_data = fw->uc.data; + unsigned int microcode_data_left = fw->uc.size; + + struct symbol_alive_response response; + int i, j; + u8 data; + + /* Symbol control */ + write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); + readl((void *)(dev->base_addr)); + write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); + readl((void *)(dev->base_addr)); + + /* HW config */ + write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ + readl((void *)(dev->base_addr)); + + /* EN_CS_ACCESS bit to reset control store pointer */ + write_nic_byte(dev, 0x210000, 0x40); + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210000, 0x0); + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210000, 0x40); + readl((void *)(dev->base_addr)); + + /* copy microcode from buffer into Symbol */ + + while (microcode_data_left > 0) { + write_nic_byte(dev, 0x210010, *microcode_data++); + write_nic_byte(dev, 0x210010, *microcode_data++); + microcode_data_left -= 2; + } + + /* EN_CS_ACCESS bit to reset the control store pointer */ + write_nic_byte(dev, 0x210000, 0x0); + readl((void *)(dev->base_addr)); + + /* Enable System (Reg 0) + * first enable causes garbage in RX FIFO */ + write_nic_byte(dev, 0x210000, 0x0); + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210000, 0x80); + readl((void *)(dev->base_addr)); + + /* Reset External Baseband Reg */ + write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); + readl((void *)(dev->base_addr)); + write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); + readl((void *)(dev->base_addr)); + + /* HW Config (Reg 5) */ + write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 + readl((void *)(dev->base_addr)); + + /* Enable System (Reg 0) + * second enable should be OK */ + write_nic_byte(dev, 0x210000, 0x00); // clear enable system + readl((void *)(dev->base_addr)); + write_nic_byte(dev, 0x210000, 0x80); // set enable system + + /* check Symbol is enabled - upped this from 5 as it wasn't always + * catching the update */ + for (i = 0; i < 10; i++) { + udelay(10); + + /* check Dino is enabled bit */ + read_nic_byte(dev, 0x210000, &data); + if (data & 0x1) + break; + } + + if (i == 10) { + printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", + dev->name); + return -EIO; + } + + /* Get Symbol alive response */ + for (i = 0; i < 30; i++) { + /* Read alive response structure */ + for (j = 0; + j < (sizeof(struct symbol_alive_response) >> 1); + j++) + read_nic_word(dev, 0x210004, + ((u16 *)&response) + j); + + if ((response.cmd_id == 1) && + (response.ucode_valid == 0x1)) + break; + udelay(10); + } + + if (i == 30) { + printk(KERN_ERR DRV_NAME ": %s: No response from Symbol - hw not alive\n", + dev->name); + printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response)); + return -EIO; + } + + return 0; +} |