diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/Kconfig')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/Kconfig | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig new file mode 100644 index 00000000000..2a45dd44cc1 --- /dev/null +++ b/drivers/net/wireless/iwlegacy/Kconfig @@ -0,0 +1,116 @@ +config IWLWIFI_LEGACY + tristate "Intel Wireless Wifi legacy devices" + depends on PCI && MAC80211 + select FW_LOADER + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGERS + select MAC80211_LEDS + +menu "Debugging Options" + depends on IWLWIFI_LEGACY + +config IWLWIFI_LEGACY_DEBUG + bool "Enable full debugging output in 4965 and 3945 drivers" + depends on IWLWIFI_LEGACY + ---help--- + This option will enable debug tracing output for the iwlwifilegacy + drivers. + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/class/net/wlan0/device/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + + You can find the list of debug mask values in: + drivers/net/wireless/iwlwifilegacy/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + +config IWLWIFI_LEGACY_DEBUGFS + bool "4965 and 3945 debugfs support" + depends on IWLWIFI_LEGACY && MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the iwlwifilegacy drivers. This + is a low-impact option that allows getting insight into the + driver's state at runtime. + +config IWLWIFI_LEGACY_DEVICE_TRACING + bool "iwlwifilegacy legacy device access tracing" + depends on IWLWIFI_LEGACY + depends on EVENT_TRACING + help + Say Y here to trace all commands, including TX frames and IO + accesses, sent to the device. If you say yes, iwlwifilegacy will + register with the ftrace framework for event tracing and dump + all this information to the ringbuffer, you may need to + increase the ringbuffer size. See the ftrace documentation + for more information. + + When tracing is not enabled, this option still has some + (though rather small) overhead. + + If unsure, say Y so we can help you better when problems + occur. +endmenu + +config IWL4965 + tristate "Intel Wireless WiFi 4965AGN (iwl4965)" + depends on IWLWIFI_LEGACY + ---help--- + This option enables support for + + Select to build the driver supporting the: + + Intel Wireless WiFi Link 4965AGN + + This driver uses the kernel's mac80211 subsystem. + + In order to use this driver, you will need a microcode (uCode) + image for it. You can obtain the microcode from: + + <http://intellinuxwireless.org/>. + + The microcode is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/kbuild/modules.txt>. The + module will be called iwl4965. + +config IWL3945 + tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" + depends on IWLWIFI_LEGACY + ---help--- + Select to build the driver supporting the: + + Intel PRO/Wireless 3945ABG/BG Network Connection + + This driver uses the kernel's mac80211 subsystem. + + In order to use this driver, you will need a microcode (uCode) + image for it. You can obtain the microcode from: + + <http://intellinuxwireless.org/>. + + The microcode is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/kbuild/modules.txt>. The + module will be called iwl3945. |