diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-4965-hw.h')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-4965-hw.h | 82 |
1 files changed, 41 insertions, 41 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h b/drivers/net/wireless/iwlegacy/iwl-4965-hw.h index fc6fa2886d9..b6b7fe2f5ca 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlegacy/iwl-4965-hw.h @@ -66,8 +66,8 @@ * Use iwl-dev.h for driver implementation definitions. */ -#ifndef __iwl_4965_hw_h__ -#define __iwl_4965_hw_h__ +#ifndef __il_4965_hw_h__ +#define __il_4965_hw_h__ #include "iwl-fh.h" @@ -100,7 +100,7 @@ /* Size of uCode instruction memory in bootstrap state machine */ #define IWL49_MAX_BSM_SIZE BSM_SRAM_SIZE -static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) +static inline int il4965_hw_valid_rtc_data_addr(u32 addr) { return (addr >= IWL49_RTC_DATA_LOWER_BOUND) && (addr < IWL49_RTC_DATA_UPPER_BOUND); @@ -118,7 +118,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * real-time temperature indicator. * * uCode provides all 4 values to the driver via the "initialize alive" - * notification (see struct iwl4965_init_alive_resp). After the runtime uCode + * notification (see struct il4965_init_alive_resp). After the runtime uCode * image loads, uCode updates the R4 value via statistics notifications * (see STATISTICS_NOTIFICATION), which occur after each received beacon * when associated, or can be requested via REPLY_STATISTICS_CMD. @@ -143,12 +143,12 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) #define TEMPERATURE_CALIB_A_VAL 259 /* Limit range of calculated temperature to be between these Kelvin values */ -#define IWL_TX_POWER_TEMPERATURE_MIN (263) -#define IWL_TX_POWER_TEMPERATURE_MAX (410) +#define IL_TX_POWER_TEMPERATURE_MIN (263) +#define IL_TX_POWER_TEMPERATURE_MAX (410) -#define IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ - (((t) < IWL_TX_POWER_TEMPERATURE_MIN) || \ - ((t) > IWL_TX_POWER_TEMPERATURE_MAX)) +#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ + (((t) < IL_TX_POWER_TEMPERATURE_MIN) || \ + ((t) > IL_TX_POWER_TEMPERATURE_MAX)) /********************* END TEMPERATURE ***************************************/ @@ -168,7 +168,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz * (legacy) channels. * - * See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom + * See struct il4965_eeprom_channel for format, and struct il4965_eeprom * for locations in EEPROM. * * 2) Factory txpower calibration information is provided separately for @@ -177,11 +177,11 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided. * - * See struct iwl4965_eeprom_calib_info (and the tree of structures - * contained within it) for format, and struct iwl4965_eeprom for + * See struct il4965_eeprom_calib_info (and the tree of structures + * contained within it) for format, and struct il4965_eeprom for * locations in EEPROM. * - * "Initialization alive" notification (see struct iwl4965_init_alive_resp) + * "Initialization alive" notification (see struct il4965_init_alive_resp) * consists of: * * 1) Temperature calculation parameters. @@ -238,7 +238,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * * 3) Determine (EEPROM) calibration sub band for the target channel, by * comparing against first and last channels in each sub band - * (see struct iwl4965_eeprom_calib_subband_info). + * (see struct il4965_eeprom_calib_subband_info). * * * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, @@ -254,7 +254,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * span of the sampled channels. * * Driver may choose the pair (for 2 Tx chains) of measurements (see - * struct iwl4965_eeprom_calib_ch_info) for which the actual measured + * struct il4965_eeprom_calib_ch_info) for which the actual measured * txpower comes closest to the desired txpower. Usually, though, * the middle set of measurements is closest to the regulatory limits, * and is therefore a good choice for all txpower calculations (this @@ -370,7 +370,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * * * 11) Read gain table entries for DSP and radio gain, place into appropriate - * location(s) in command (struct iwl4965_txpowertable_cmd). + * location(s) in command (struct il4965_txpowertable_cmd). */ /** @@ -382,7 +382,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * The value "6" represents number of steps in gain table to reduce power 3 dB. * Each step is 1/2 dB. */ -#define IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) +#define IL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) /** * CCK gain compensation. @@ -394,13 +394,13 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, * bits [3:2], 1 = B, 2 = C. */ -#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9) -#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5) +#define IL_TX_POWER_CCK_COMPENSATION_B_STEP (9) +#define IL_TX_POWER_CCK_COMPENSATION_C_STEP (5) /* * 4965 power supply voltage compensation for txpower */ -#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V (7) +#define TX_POWER_IL_VOLTAGE_CODES_PER_03V (7) /** * Gain tables. @@ -668,10 +668,10 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * * Units are in half-dBm (i.e. "34" means 17 dBm). */ -#define IWL_TX_POWER_DEFAULT_REGULATORY_24 (34) -#define IWL_TX_POWER_DEFAULT_REGULATORY_52 (34) -#define IWL_TX_POWER_REGULATORY_MIN (0) -#define IWL_TX_POWER_REGULATORY_MAX (34) +#define IL_TX_POWER_DEFAULT_REGULATORY_24 (34) +#define IL_TX_POWER_DEFAULT_REGULATORY_52 (34) +#define IL_TX_POWER_REGULATORY_MIN (0) +#define IL_TX_POWER_REGULATORY_MAX (34) /** * Sanity checks and default values for EEPROM saturation levels. @@ -689,10 +689,10 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * * Units are in half-dBm (i.e. "38" means 19 dBm). */ -#define IWL_TX_POWER_DEFAULT_SATURATION_24 (38) -#define IWL_TX_POWER_DEFAULT_SATURATION_52 (38) -#define IWL_TX_POWER_SATURATION_MIN (20) -#define IWL_TX_POWER_SATURATION_MAX (50) +#define IL_TX_POWER_DEFAULT_SATURATION_24 (38) +#define IL_TX_POWER_DEFAULT_SATURATION_52 (38) +#define IL_TX_POWER_SATURATION_MIN (20) +#define IL_TX_POWER_SATURATION_MAX (50) /** * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance) @@ -709,24 +709,24 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * Different frequency ranges require different compensation, as shown below. */ /* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR1_FCH 34 -#define CALIB_IWL_TX_ATTEN_GR1_LCH 43 +#define CALIB_IL_TX_ATTEN_GR1_FCH 34 +#define CALIB_IL_TX_ATTEN_GR1_LCH 43 /* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR2_FCH 44 -#define CALIB_IWL_TX_ATTEN_GR2_LCH 70 +#define CALIB_IL_TX_ATTEN_GR2_FCH 44 +#define CALIB_IL_TX_ATTEN_GR2_LCH 70 /* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR3_FCH 71 -#define CALIB_IWL_TX_ATTEN_GR3_LCH 124 +#define CALIB_IL_TX_ATTEN_GR3_FCH 71 +#define CALIB_IL_TX_ATTEN_GR3_LCH 124 /* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR4_FCH 125 -#define CALIB_IWL_TX_ATTEN_GR4_LCH 200 +#define CALIB_IL_TX_ATTEN_GR4_FCH 125 +#define CALIB_IL_TX_ATTEN_GR4_LCH 200 /* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR5_FCH 1 -#define CALIB_IWL_TX_ATTEN_GR5_LCH 20 +#define CALIB_IL_TX_ATTEN_GR5_FCH 1 +#define CALIB_IL_TX_ATTEN_GR5_LCH 20 enum { CALIB_CH_GROUP_1 = 0, @@ -767,7 +767,7 @@ enum { /** - * struct iwl4965_schedq_bc_tbl + * struct il4965_schedq_bc_tbl * * Byte Count table * @@ -784,7 +784,7 @@ enum { * padding puts each byte count table on a 1024-byte boundary; * 4965 assumes tables are separated by 1024 bytes. */ -struct iwl4965_scd_bc_tbl { +struct il4965_scd_bc_tbl { __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; } __packed; @@ -808,4 +808,4 @@ struct iwl4965_scd_bc_tbl { #define IWL4965_FIRST_AMPDU_QUEUE 10 -#endif /* !__iwl_4965_hw_h__ */ +#endif /* !__il_4965_hw_h__ */ |