diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-power.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-power.c | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c deleted file mode 100644 index 903ef0d6d6c..00000000000 --- a/drivers/net/wireless/iwlegacy/iwl-power.c +++ /dev/null @@ -1,165 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-commands.h" -#include "iwl-debug.h" -#include "iwl-power.h" - -/* - * Setting power level allows the card to go to sleep when not busy. - * - * We calculate a sleep command based on the required latency, which - * we get from mac80211. In order to handle thermal throttling, we can - * also use pre-defined power levels. - */ - -/* - * This defines the old power levels. They are still used by default - * (level 1) and for thermal throttle (levels 3 through 5) - */ - -struct iwl_power_vec_entry { - struct iwl_powertable_cmd cmd; - u8 no_dtim; /* number of skip dtim */ -}; - -static void iwl_legacy_power_sleep_cam_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd) -{ - memset(cmd, 0, sizeof(*cmd)); - - if (priv->power_data.pci_pm) - cmd->flags |= IWL_POWER_PCI_PM_MSK; - - IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); -} - -static int -iwl_legacy_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) -{ - IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); - IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); - IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", - le32_to_cpu(cmd->tx_data_timeout)); - IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", - le32_to_cpu(cmd->rx_data_timeout)); - IWL_DEBUG_POWER(priv, - "Sleep interval vector = { %d , %d , %d , %d , %d }\n", - le32_to_cpu(cmd->sleep_interval[0]), - le32_to_cpu(cmd->sleep_interval[1]), - le32_to_cpu(cmd->sleep_interval[2]), - le32_to_cpu(cmd->sleep_interval[3]), - le32_to_cpu(cmd->sleep_interval[4])); - - return iwl_legacy_send_cmd_pdu(priv, POWER_TABLE_CMD, - sizeof(struct iwl_powertable_cmd), cmd); -} - -int -iwl_legacy_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, - bool force) -{ - int ret; - bool update_chains; - - lockdep_assert_held(&priv->mutex); - - /* Don't update the RX chain when chain noise calibration is running */ - update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || - priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; - - if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) - return 0; - - if (!iwl_legacy_is_ready_rf(priv)) - return -EIO; - - /* scan complete use sleep_power_next, need to be updated */ - memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); - if (test_bit(STATUS_SCANNING, &priv->status) && !force) { - IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); - return 0; - } - - if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) - set_bit(STATUS_POWER_PMI, &priv->status); - - ret = iwl_legacy_set_power(priv, cmd); - if (!ret) { - if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) - clear_bit(STATUS_POWER_PMI, &priv->status); - - if (priv->cfg->ops->lib->update_chain_flags && update_chains) - priv->cfg->ops->lib->update_chain_flags(priv); - else if (priv->cfg->ops->lib->update_chain_flags) - IWL_DEBUG_POWER(priv, - "Cannot update the power, chain noise " - "calibration running: %d\n", - priv->chain_noise_data.state); - - memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); - } else - IWL_ERR(priv, "set power fail, ret = %d", ret); - - return ret; -} - -int iwl_legacy_power_update_mode(struct iwl_priv *priv, bool force) -{ - struct iwl_powertable_cmd cmd; - - iwl_legacy_power_sleep_cam_cmd(priv, &cmd); - return iwl_legacy_power_set_mode(priv, &cmd, force); -} -EXPORT_SYMBOL(iwl_legacy_power_update_mode); - -/* initialize to default */ -void iwl_legacy_power_initialize(struct iwl_priv *priv) -{ - u16 lctl = iwl_legacy_pcie_link_ctl(priv); - - priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN); - - priv->power_data.debug_sleep_level_override = -1; - - memset(&priv->power_data.sleep_cmd, 0, - sizeof(priv->power_data.sleep_cmd)); -} -EXPORT_SYMBOL(iwl_legacy_power_initialize); |