diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/dvm')
26 files changed, 27911 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/Makefile b/drivers/net/wireless/iwlwifi/dvm/Makefile new file mode 100644 index 00000000000..5ff76b20414 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/Makefile @@ -0,0 +1,13 @@ +# DVM +obj-$(CONFIG_IWLDVM) += iwldvm.o +iwldvm-objs += main.o rs.o mac80211.o ucode.o tx.o +iwldvm-objs += lib.o calib.o tt.o sta.o rx.o + +iwldvm-objs += power.o +iwldvm-objs += scan.o led.o +iwldvm-objs += rxon.o devices.o + +iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o +iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += testmode.o + +ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/../ diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h new file mode 100644 index 00000000000..9bb16bdf6d2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -0,0 +1,529 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __iwl_agn_h__ +#define __iwl_agn_h__ + +#include "iwl-config.h" + +#include "dev.h" + +/* The first 11 queues (0-10) are used otherwise */ +#define IWLAGN_FIRST_AMPDU_QUEUE 11 + +/* AUX (TX during scan dwell) queue */ +#define IWL_AUX_QUEUE 10 + +/* device operations */ +extern struct iwl_lib_ops iwl1000_lib; +extern struct iwl_lib_ops iwl2000_lib; +extern struct iwl_lib_ops iwl2030_lib; +extern struct iwl_lib_ops iwl5000_lib; +extern struct iwl_lib_ops iwl5150_lib; +extern struct iwl_lib_ops iwl6000_lib; +extern struct iwl_lib_ops iwl6030_lib; + + +#define TIME_UNIT 1024 + +/***************************************************** +* DRIVER STATUS FUNCTIONS +******************************************************/ +#define STATUS_RF_KILL_HW 0 +#define STATUS_CT_KILL 1 +#define STATUS_ALIVE 2 +#define STATUS_READY 3 +#define STATUS_EXIT_PENDING 5 +#define STATUS_STATISTICS 6 +#define STATUS_SCANNING 7 +#define STATUS_SCAN_ABORTING 8 +#define STATUS_SCAN_HW 9 +#define STATUS_FW_ERROR 10 +#define STATUS_CHANNEL_SWITCH_PENDING 11 +#define STATUS_SCAN_COMPLETE 12 +#define STATUS_POWER_PMI 13 +#define STATUS_SCAN_ROC_EXPIRED 14 + +struct iwl_ucode_capabilities; + +extern struct ieee80211_ops iwlagn_hw_ops; + +static inline void iwl_set_calib_hdr(struct iwl_calib_hdr *hdr, u8 cmd) +{ + hdr->op_code = cmd; + hdr->first_group = 0; + hdr->groups_num = 1; + hdr->data_valid = 1; +} + +void iwl_down(struct iwl_priv *priv); +void iwl_cancel_deferred_work(struct iwl_priv *priv); +void iwlagn_prepare_restart(struct iwl_priv *priv); +int __must_check iwl_rx_dispatch(struct iwl_op_mode *op_mode, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + +bool iwl_check_for_ct_kill(struct iwl_priv *priv); + +void iwlagn_lift_passive_no_rx(struct iwl_priv *priv); + +/* MAC80211 */ +struct ieee80211_hw *iwl_alloc_all(void); +int iwlagn_mac_setup_register(struct iwl_priv *priv, + const struct iwl_ucode_capabilities *capa); +void iwlagn_mac_unregister(struct iwl_priv *priv); + +/* commands */ +int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); +int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, + u32 flags, u16 len, const void *data); + +/* RXON */ +void iwl_connection_init_rx_config(struct iwl_priv *priv, + struct iwl_rxon_context *ctx); +int iwlagn_set_pan_params(struct iwl_priv *priv); +int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx); +void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx); +int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed); +void iwlagn_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx); +void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf); +void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, + struct iwl_rxon_context *ctx); +void iwl_set_flags_for_band(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + enum ieee80211_band band, + struct ieee80211_vif *vif); + +/* uCode */ +int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type); +void iwl_send_prio_tbl(struct iwl_priv *priv); +int iwl_init_alive_start(struct iwl_priv *priv); +int iwl_run_init_ucode(struct iwl_priv *priv); +int iwl_load_ucode_wait_alive(struct iwl_priv *priv, + enum iwl_ucode_type ucode_type); +int iwl_send_calib_results(struct iwl_priv *priv); +int iwl_calib_set(struct iwl_priv *priv, + const struct iwl_calib_hdr *cmd, int len); +void iwl_calib_free_results(struct iwl_priv *priv); +int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, + char **buf, bool display); +int iwlagn_hw_valid_rtc_data_addr(u32 addr); + +/* lib */ +int iwlagn_send_tx_power(struct iwl_priv *priv); +void iwlagn_temperature(struct iwl_priv *priv); +int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control); +void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control); +int iwlagn_send_beacon_cmd(struct iwl_priv *priv); +int iwl_send_statistics_request(struct iwl_priv *priv, + u8 flags, bool clear); + +static inline const struct ieee80211_supported_band *iwl_get_hw_mode( + struct iwl_priv *priv, enum ieee80211_band band) +{ + return priv->hw->wiphy->bands[band]; +} + +#ifdef CONFIG_PM_SLEEP +int iwlagn_send_patterns(struct iwl_priv *priv, + struct cfg80211_wowlan *wowlan); +int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan); +#endif + +/* rx */ +int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band); +void iwl_setup_rx_handlers(struct iwl_priv *priv); +void iwl_chswitch_done(struct iwl_priv *priv, bool is_success); + + +/* tx */ +int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb); +int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 *ssn); +int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u8 buf_size); +int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid); +int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + +static inline u32 iwl_tx_status_to_mac80211(u32 status) +{ + status &= TX_STATUS_MSK; + + switch (status) { + case TX_STATUS_SUCCESS: + case TX_STATUS_DIRECT_DONE: + return IEEE80211_TX_STAT_ACK; + case TX_STATUS_FAIL_DEST_PS: + case TX_STATUS_FAIL_PASSIVE_NO_RX: + return IEEE80211_TX_STAT_TX_FILTERED; + default: + return 0; + } +} + +static inline bool iwl_is_tx_success(u32 status) +{ + status &= TX_STATUS_MSK; + return (status == TX_STATUS_SUCCESS) || + (status == TX_STATUS_DIRECT_DONE); +} + +u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx, u8 valid); + +/* scan */ +void iwlagn_post_scan(struct iwl_priv *priv); +void iwlagn_disable_roc(struct iwl_priv *priv); +int iwl_force_rf_reset(struct iwl_priv *priv, bool external); +void iwl_init_scan_params(struct iwl_priv *priv); +int iwl_scan_cancel(struct iwl_priv *priv); +void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); +void iwl_force_scan_end(struct iwl_priv *priv); +void iwl_internal_short_hw_scan(struct iwl_priv *priv); +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); +void iwl_setup_scan_deferred_work(struct iwl_priv *priv); +void iwl_cancel_scan_deferred_work(struct iwl_priv *priv); +int __must_check iwl_scan_initiate(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum iwl_scan_type scan_type, + enum ieee80211_band band); + +void iwl_scan_roc_expired(struct iwl_priv *priv); +void iwl_scan_offchannel_skb(struct iwl_priv *priv); +void iwl_scan_offchannel_skb_status(struct iwl_priv *priv); + +/* For faster active scanning, scan will move to the next channel if fewer than + * PLCP_QUIET_THRESH packets are heard on this channel within + * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell + * time if it's a quiet channel (nothing responded to our probe, and there's + * no other traffic). + * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ +#define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ +#define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ + +#define IWL_SCAN_CHECK_WATCHDOG (HZ * 15) + + +/* bt coex */ +void iwlagn_send_advance_bt_config(struct iwl_priv *priv); +int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv); +void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv); +void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv); +void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv); +void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena); + +static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv) +{ + return priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist; +} + +#ifdef CONFIG_IWLWIFI_DEBUG +const char *iwl_get_tx_fail_reason(u32 status); +const char *iwl_get_agg_tx_fail_reason(u16 status); +#else +static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; } +static inline const char *iwl_get_agg_tx_fail_reason(u16 status) { return ""; } +#endif + + +/* station management */ +int iwlagn_manage_ibss_station(struct iwl_priv *priv, + struct ieee80211_vif *vif, bool add); +#define IWL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */ +#define IWL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */ +#define IWL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of + being activated */ +#define IWL_STA_LOCAL BIT(3) /* station state not directed by mac80211; + (this is for the IBSS BSSID stations) */ +#define IWL_STA_BCAST BIT(4) /* this station is the special bcast station */ + + +void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx); +void iwl_clear_ucode_stations(struct iwl_priv *priv, + struct iwl_rxon_context *ctx); +void iwl_dealloc_bcast_stations(struct iwl_priv *priv); +int iwl_get_free_ucode_key_offset(struct iwl_priv *priv); +int iwl_send_add_sta(struct iwl_priv *priv, + struct iwl_addsta_cmd *sta, u8 flags); +int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + const u8 *addr, bool is_ap, + struct ieee80211_sta *sta, u8 *sta_id_r); +int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id, + const u8 *addr); +void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id, + const u8 *addr); +u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + const u8 *addr, bool is_ap, struct ieee80211_sta *sta); + +int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct iwl_link_quality_cmd *lq, u8 flags, bool init); +int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); +int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct ieee80211_sta *sta); + +bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_sta_ht_cap *ht_cap); + +static inline int iwl_sta_id(struct ieee80211_sta *sta) +{ + if (WARN_ON(!sta)) + return IWL_INVALID_STATION; + + return ((struct iwl_station_priv *)sta->drv_priv)->sta_id; +} + +int iwlagn_alloc_bcast_station(struct iwl_priv *priv, + struct iwl_rxon_context *ctx); +int iwlagn_add_bssid_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + const u8 *addr, u8 *sta_id_r); +int iwl_remove_default_wep_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *key); +int iwl_set_default_wep_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *key); +int iwl_restore_default_wep_keys(struct iwl_priv *priv, + struct iwl_rxon_context *ctx); +int iwl_set_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *key, + struct ieee80211_sta *sta); +int iwl_remove_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *key, + struct ieee80211_sta *sta); +void iwl_update_tkip_key(struct iwl_priv *priv, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); +int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid); +int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta, + int tid, u16 ssn); +int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta, + int tid); +void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt); +int iwl_update_bcast_station(struct iwl_priv *priv, + struct iwl_rxon_context *ctx); +int iwl_update_bcast_stations(struct iwl_priv *priv); + +/* rate */ +static inline u32 iwl_ant_idx_to_flags(u8 ant_idx) +{ + return BIT(ant_idx) << RATE_MCS_ANT_POS; +} + +static inline u8 iwl_hw_get_rate(__le32 rate_n_flags) +{ + return le32_to_cpu(rate_n_flags) & RATE_MCS_RATE_MSK; +} + +static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) +{ + return cpu_to_le32(flags|(u32)rate); +} + +extern int iwl_alive_start(struct iwl_priv *priv); + +/* testmode support */ +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + +extern int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, + int len); +extern int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len); +extern void iwl_testmode_init(struct iwl_priv *priv); +extern void iwl_testmode_free(struct iwl_priv *priv); + +#else + +static inline +int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len) +{ + return -ENOSYS; +} + +static inline +int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len) +{ + return -ENOSYS; +} + +static inline void iwl_testmode_init(struct iwl_priv *priv) +{ +} + +static inline void iwl_testmode_free(struct iwl_priv *priv) +{ +} +#endif + +#ifdef CONFIG_IWLWIFI_DEBUG +void iwl_print_rx_config_cmd(struct iwl_priv *priv, + enum iwl_rxon_context_id ctxid); +#else +static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, + enum iwl_rxon_context_id ctxid) +{ +} +#endif + +/* status checks */ + +static inline int iwl_is_ready(struct iwl_priv *priv) +{ + /* The adapter is 'ready' if READY EXIT_PENDING is not set */ + return test_bit(STATUS_READY, &priv->status) && + !test_bit(STATUS_EXIT_PENDING, &priv->status); +} + +static inline int iwl_is_alive(struct iwl_priv *priv) +{ + return test_bit(STATUS_ALIVE, &priv->status); +} + +static inline int iwl_is_rfkill(struct iwl_priv *priv) +{ + return test_bit(STATUS_RF_KILL_HW, &priv->status); +} + +static inline int iwl_is_ctkill(struct iwl_priv *priv) +{ + return test_bit(STATUS_CT_KILL, &priv->status); +} + +static inline int iwl_is_ready_rf(struct iwl_priv *priv) +{ + if (iwl_is_rfkill(priv)) + return 0; + + return iwl_is_ready(priv); +} + +static inline void iwl_dvm_set_pmi(struct iwl_priv *priv, bool state) +{ + if (state) + set_bit(STATUS_POWER_PMI, &priv->status); + else + clear_bit(STATUS_POWER_PMI, &priv->status); + iwl_trans_set_pmi(priv->trans, state); +} + +#ifdef CONFIG_IWLWIFI_DEBUGFS +int iwl_dbgfs_register(struct iwl_priv *priv, const char *name); +void iwl_dbgfs_unregister(struct iwl_priv *priv); +#else +static inline int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) +{ + return 0; +} +static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) +{ +} +#endif /* CONFIG_IWLWIFI_DEBUGFS */ + +#ifdef CONFIG_IWLWIFI_DEBUG +#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...) \ +do { \ + if (!iwl_is_rfkill((m))) \ + IWL_ERR(m, fmt, ##args); \ + else \ + __iwl_err((m)->dev, true, \ + !iwl_have_debug_level(IWL_DL_RADIO), \ + fmt, ##args); \ +} while (0) +#else +#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...) \ +do { \ + if (!iwl_is_rfkill((m))) \ + IWL_ERR(m, fmt, ##args); \ + else \ + __iwl_err((m)->dev, true, true, fmt, ##args); \ +} while (0) +#endif /* CONFIG_IWLWIFI_DEBUG */ + +extern const char *iwl_dvm_cmd_strings[REPLY_MAX]; + +static inline const char *iwl_dvm_get_cmd_string(u8 cmd) +{ + const char *s = iwl_dvm_cmd_strings[cmd]; + if (s) + return s; + return "UNKNOWN"; +} +#endif /* __iwl_agn_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.c b/drivers/net/wireless/iwlwifi/dvm/calib.c new file mode 100644 index 00000000000..f2dd671d7dc --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/calib.c @@ -0,0 +1,1114 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#include <linux/slab.h> +#include <net/mac80211.h> + +#include "iwl-trans.h" + +#include "dev.h" +#include "calib.h" +#include "agn.h" + +/***************************************************************************** + * INIT calibrations framework + *****************************************************************************/ + +/* Opaque calibration results */ +struct iwl_calib_result { + struct list_head list; + size_t cmd_len; + struct iwl_calib_hdr hdr; + /* data follows */ +}; + +struct statistics_general_data { + u32 beacon_silence_rssi_a; + u32 beacon_silence_rssi_b; + u32 beacon_silence_rssi_c; + u32 beacon_energy_a; + u32 beacon_energy_b; + u32 beacon_energy_c; +}; + +int iwl_send_calib_results(struct iwl_priv *priv) +{ + struct iwl_host_cmd hcmd = { + .id = REPLY_PHY_CALIBRATION_CMD, + .flags = CMD_SYNC, + }; + struct iwl_calib_result *res; + + list_for_each_entry(res, &priv->calib_results, list) { + int ret; + + hcmd.len[0] = res->cmd_len; + hcmd.data[0] = &res->hdr; + hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; + ret = iwl_dvm_send_cmd(priv, &hcmd); + if (ret) { + IWL_ERR(priv, "Error %d on calib cmd %d\n", + ret, res->hdr.op_code); + return ret; + } + } + + return 0; +} + +int iwl_calib_set(struct iwl_priv *priv, + const struct iwl_calib_hdr *cmd, int len) +{ + struct iwl_calib_result *res, *tmp; + + res = kmalloc(sizeof(*res) + len - sizeof(struct iwl_calib_hdr), + GFP_ATOMIC); + if (!res) + return -ENOMEM; + memcpy(&res->hdr, cmd, len); + res->cmd_len = len; + + list_for_each_entry(tmp, &priv->calib_results, list) { + if (tmp->hdr.op_code == res->hdr.op_code) { + list_replace(&tmp->list, &res->list); + kfree(tmp); + return 0; + } + } + + /* wasn't in list already */ + list_add_tail(&res->list, &priv->calib_results); + + return 0; +} + +void iwl_calib_free_results(struct iwl_priv *priv) +{ + struct iwl_calib_result *res, *tmp; + + list_for_each_entry_safe(res, tmp, &priv->calib_results, list) { + list_del(&res->list); + kfree(res); + } +} + +/***************************************************************************** + * RUNTIME calibrations framework + *****************************************************************************/ + +/* "false alarms" are signals that our DSP tries to lock onto, + * but then determines that they are either noise, or transmissions + * from a distant wireless network (also "noise", really) that get + * "stepped on" by stronger transmissions within our own network. + * This algorithm attempts to set a sensitivity level that is high + * enough to receive all of our own network traffic, but not so + * high that our DSP gets too busy trying to lock onto non-network + * activity/noise. */ +static int iwl_sens_energy_cck(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time, + struct statistics_general_data *rx_info) +{ + u32 max_nrg_cck = 0; + int i = 0; + u8 max_silence_rssi = 0; + u32 silence_ref = 0; + u8 silence_rssi_a = 0; + u8 silence_rssi_b = 0; + u8 silence_rssi_c = 0; + u32 val; + + /* "false_alarms" values below are cross-multiplications to assess the + * numbers of false alarms within the measured period of actual Rx + * (Rx is off when we're txing), vs the min/max expected false alarms + * (some should be expected if rx is sensitive enough) in a + * hypothetical listening period of 200 time units (TU), 204.8 msec: + * + * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time + * + * */ + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; + u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + data->nrg_auto_corr_silence_diff = 0; + + /* Find max silence rssi among all 3 receivers. + * This is background noise, which may include transmissions from other + * networks, measured during silence before our network's beacon */ + silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & + ALL_BAND_FILTER) >> 8); + silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & + ALL_BAND_FILTER) >> 8); + silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & + ALL_BAND_FILTER) >> 8); + + val = max(silence_rssi_b, silence_rssi_c); + max_silence_rssi = max(silence_rssi_a, (u8) val); + + /* Store silence rssi in 20-beacon history table */ + data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; + data->nrg_silence_idx++; + if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) + data->nrg_silence_idx = 0; + + /* Find max silence rssi across 20 beacon history */ + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { + val = data->nrg_silence_rssi[i]; + silence_ref = max(silence_ref, val); + } + IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n", + silence_rssi_a, silence_rssi_b, silence_rssi_c, + silence_ref); + + /* Find max rx energy (min value!) among all 3 receivers, + * measured during beacon frame. + * Save it in 10-beacon history table. */ + i = data->nrg_energy_idx; + val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); + data->nrg_value[i] = min(rx_info->beacon_energy_a, val); + + data->nrg_energy_idx++; + if (data->nrg_energy_idx >= 10) + data->nrg_energy_idx = 0; + + /* Find min rx energy (max value) across 10 beacon history. + * This is the minimum signal level that we want to receive well. + * Add backoff (margin so we don't miss slightly lower energy frames). + * This establishes an upper bound (min value) for energy threshold. */ + max_nrg_cck = data->nrg_value[0]; + for (i = 1; i < 10; i++) + max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); + max_nrg_cck += 6; + + IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", + rx_info->beacon_energy_a, rx_info->beacon_energy_b, + rx_info->beacon_energy_c, max_nrg_cck - 6); + + /* Count number of consecutive beacons with fewer-than-desired + * false alarms. */ + if (false_alarms < min_false_alarms) + data->num_in_cck_no_fa++; + else + data->num_in_cck_no_fa = 0; + IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n", + data->num_in_cck_no_fa); + + /* If we got too many false alarms this time, reduce sensitivity */ + if ((false_alarms > max_false_alarms) && + (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) { + IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n", + false_alarms, max_false_alarms); + IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n"); + data->nrg_curr_state = IWL_FA_TOO_MANY; + /* Store for "fewer than desired" on later beacon */ + data->nrg_silence_ref = silence_ref; + + /* increase energy threshold (reduce nrg value) + * to decrease sensitivity */ + data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK; + /* Else if we got fewer than desired, increase sensitivity */ + } else if (false_alarms < min_false_alarms) { + data->nrg_curr_state = IWL_FA_TOO_FEW; + + /* Compare silence level with silence level for most recent + * healthy number or too many false alarms */ + data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - + (s32)silence_ref; + + IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n", + false_alarms, min_false_alarms, + data->nrg_auto_corr_silence_diff); + + /* Increase value to increase sensitivity, but only if: + * 1a) previous beacon did *not* have *too many* false alarms + * 1b) AND there's a significant difference in Rx levels + * from a previous beacon with too many, or healthy # FAs + * OR 2) We've seen a lot of beacons (100) with too few + * false alarms */ + if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n"); + /* Increase nrg value to increase sensitivity */ + val = data->nrg_th_cck + NRG_STEP_CCK; + data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val); + } else { + IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n"); + } + + /* Else we got a healthy number of false alarms, keep status quo */ + } else { + IWL_DEBUG_CALIB(priv, " FA in safe zone\n"); + data->nrg_curr_state = IWL_FA_GOOD_RANGE; + + /* Store for use in "fewer than desired" with later beacon */ + data->nrg_silence_ref = silence_ref; + + /* If previous beacon had too many false alarms, + * give it some extra margin by reducing sensitivity again + * (but don't go below measured energy of desired Rx) */ + if (IWL_FA_TOO_MANY == data->nrg_prev_state) { + IWL_DEBUG_CALIB(priv, "... increasing margin\n"); + if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN)) + data->nrg_th_cck -= NRG_MARGIN; + else + data->nrg_th_cck = max_nrg_cck; + } + } + + /* Make sure the energy threshold does not go above the measured + * energy of the desired Rx signals (reduced by backoff margin), + * or else we might start missing Rx frames. + * Lower value is higher energy, so we use max()! + */ + data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); + IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck); + + data->nrg_prev_state = data->nrg_curr_state; + + /* Auto-correlation CCK algorithm */ + if (false_alarms > min_false_alarms) { + + /* increase auto_corr values to decrease sensitivity + * so the DSP won't be disturbed by the noise + */ + if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) + data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; + else { + val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + min((u32)ranges->auto_corr_max_cck, val); + } + val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + min((u32)ranges->auto_corr_max_cck_mrc, val); + } else if ((false_alarms < min_false_alarms) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + /* Decrease auto_corr values to increase sensitivity */ + val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + max((u32)ranges->auto_corr_min_cck, val); + val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + max((u32)ranges->auto_corr_min_cck_mrc, val); + } + + return 0; +} + + +static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time) +{ + u32 val; + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; + u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + /* If we got too many false alarms this time, reduce sensitivity */ + if (false_alarms > max_false_alarms) { + + IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n", + false_alarms, max_false_alarms); + + val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + min((u32)ranges->auto_corr_max_ofdm, val); + + val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + min((u32)ranges->auto_corr_max_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + min((u32)ranges->auto_corr_max_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val); + } + + /* Else if we got fewer than desired, increase sensitivity */ + else if (false_alarms < min_false_alarms) { + + IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n", + false_alarms, min_false_alarms); + + val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + max((u32)ranges->auto_corr_min_ofdm, val); + + val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + max((u32)ranges->auto_corr_min_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + max((u32)ranges->auto_corr_min_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val); + } else { + IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n", + min_false_alarms, false_alarms, max_false_alarms); + } + return 0; +} + +static void iwl_prepare_legacy_sensitivity_tbl(struct iwl_priv *priv, + struct iwl_sensitivity_data *data, + __le16 *tbl) +{ + tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm); + tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc); + tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_x1); + tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); + + tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck); + tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck_mrc); + + tbl[HD_MIN_ENERGY_CCK_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_cck); + tbl[HD_MIN_ENERGY_OFDM_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_ofdm); + + tbl[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = + cpu_to_le16(data->barker_corr_th_min); + tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16(data->barker_corr_th_min_mrc); + tbl[HD_OFDM_ENERGY_TH_IN_INDEX] = + cpu_to_le16(data->nrg_th_cca); + + IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", + data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, + data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, + data->nrg_th_ofdm); + + IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n", + data->auto_corr_cck, data->auto_corr_cck_mrc, + data->nrg_th_cck); +} + +/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ +static int iwl_sensitivity_write(struct iwl_priv *priv) +{ + struct iwl_sensitivity_cmd cmd; + struct iwl_sensitivity_data *data = NULL; + struct iwl_host_cmd cmd_out = { + .id = SENSITIVITY_CMD, + .len = { sizeof(struct iwl_sensitivity_cmd), }, + .flags = CMD_ASYNC, + .data = { &cmd, }, + }; + + data = &(priv->sensitivity_data); + + memset(&cmd, 0, sizeof(cmd)); + + iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.table[0]); + + /* Update uCode's "work" table, and copy it to DSP */ + cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; + + /* Don't send command to uCode if nothing has changed */ + if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), + sizeof(u16)*HD_TABLE_SIZE)) { + IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n"); + return 0; + } + + /* Copy table for comparison next time */ + memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), + sizeof(u16)*HD_TABLE_SIZE); + + return iwl_dvm_send_cmd(priv, &cmd_out); +} + +/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ +static int iwl_enhance_sensitivity_write(struct iwl_priv *priv) +{ + struct iwl_enhance_sensitivity_cmd cmd; + struct iwl_sensitivity_data *data = NULL; + struct iwl_host_cmd cmd_out = { + .id = SENSITIVITY_CMD, + .len = { sizeof(struct iwl_enhance_sensitivity_cmd), }, + .flags = CMD_ASYNC, + .data = { &cmd, }, + }; + + data = &(priv->sensitivity_data); + + memset(&cmd, 0, sizeof(cmd)); + + iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]); + + if (priv->cfg->base_params->hd_v2) { + cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] = + HD_INA_NON_SQUARE_DET_OFDM_DATA_V2; + cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] = + HD_INA_NON_SQUARE_DET_CCK_DATA_V2; + cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] = + HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] = + HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = + HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] = + HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] = + HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] = + HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = + HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] = + HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] = + HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2; + } else { + cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] = + HD_INA_NON_SQUARE_DET_OFDM_DATA_V1; + cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] = + HD_INA_NON_SQUARE_DET_CCK_DATA_V1; + cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] = + HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] = + HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = + HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] = + HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1; + cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] = + HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] = + HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = + HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] = + HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1; + cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] = + HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1; + } + + /* Update uCode's "work" table, and copy it to DSP */ + cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; + + /* Don't send command to uCode if nothing has changed */ + if (!memcmp(&cmd.enhance_table[0], &(priv->sensitivity_tbl[0]), + sizeof(u16)*HD_TABLE_SIZE) && + !memcmp(&cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX], + &(priv->enhance_sensitivity_tbl[0]), + sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES)) { + IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n"); + return 0; + } + + /* Copy table for comparison next time */ + memcpy(&(priv->sensitivity_tbl[0]), &(cmd.enhance_table[0]), + sizeof(u16)*HD_TABLE_SIZE); + memcpy(&(priv->enhance_sensitivity_tbl[0]), + &(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]), + sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES); + + return iwl_dvm_send_cmd(priv, &cmd_out); +} + +void iwl_init_sensitivity(struct iwl_priv *priv) +{ + int ret = 0; + int i; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED) + return; + + IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n"); + + /* Clear driver's sensitivity algo data */ + data = &(priv->sensitivity_data); + + if (ranges == NULL) + return; + + memset(data, 0, sizeof(struct iwl_sensitivity_data)); + + data->num_in_cck_no_fa = 0; + data->nrg_curr_state = IWL_FA_TOO_MANY; + data->nrg_prev_state = IWL_FA_TOO_MANY; + data->nrg_silence_ref = 0; + data->nrg_silence_idx = 0; + data->nrg_energy_idx = 0; + + for (i = 0; i < 10; i++) + data->nrg_value[i] = 0; + + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) + data->nrg_silence_rssi[i] = 0; + + data->auto_corr_ofdm = ranges->auto_corr_min_ofdm; + data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc; + data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1; + data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1; + data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; + data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc; + data->nrg_th_cck = ranges->nrg_th_cck; + data->nrg_th_ofdm = ranges->nrg_th_ofdm; + data->barker_corr_th_min = ranges->barker_corr_th_min; + data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc; + data->nrg_th_cca = ranges->nrg_th_cca; + + data->last_bad_plcp_cnt_ofdm = 0; + data->last_fa_cnt_ofdm = 0; + data->last_bad_plcp_cnt_cck = 0; + data->last_fa_cnt_cck = 0; + + if (priv->fw->enhance_sensitivity_table) + ret |= iwl_enhance_sensitivity_write(priv); + else + ret |= iwl_sensitivity_write(priv); + IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret); +} + +void iwl_sensitivity_calibration(struct iwl_priv *priv) +{ + u32 rx_enable_time; + u32 fa_cck; + u32 fa_ofdm; + u32 bad_plcp_cck; + u32 bad_plcp_ofdm; + u32 norm_fa_ofdm; + u32 norm_fa_cck; + struct iwl_sensitivity_data *data = NULL; + struct statistics_rx_non_phy *rx_info; + struct statistics_rx_phy *ofdm, *cck; + struct statistics_general_data statis; + + if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED) + return; + + data = &(priv->sensitivity_data); + + if (!iwl_is_any_associated(priv)) { + IWL_DEBUG_CALIB(priv, "<< - not associated\n"); + return; + } + + spin_lock_bh(&priv->statistics.lock); + rx_info = &priv->statistics.rx_non_phy; + ofdm = &priv->statistics.rx_ofdm; + cck = &priv->statistics.rx_cck; + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB(priv, "<< invalid data.\n"); + spin_unlock_bh(&priv->statistics.lock); + return; + } + + /* Extract Statistics: */ + rx_enable_time = le32_to_cpu(rx_info->channel_load); + fa_cck = le32_to_cpu(cck->false_alarm_cnt); + fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt); + bad_plcp_cck = le32_to_cpu(cck->plcp_err); + bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err); + + statis.beacon_silence_rssi_a = + le32_to_cpu(rx_info->beacon_silence_rssi_a); + statis.beacon_silence_rssi_b = + le32_to_cpu(rx_info->beacon_silence_rssi_b); + statis.beacon_silence_rssi_c = + le32_to_cpu(rx_info->beacon_silence_rssi_c); + statis.beacon_energy_a = + le32_to_cpu(rx_info->beacon_energy_a); + statis.beacon_energy_b = + le32_to_cpu(rx_info->beacon_energy_b); + statis.beacon_energy_c = + le32_to_cpu(rx_info->beacon_energy_c); + + spin_unlock_bh(&priv->statistics.lock); + + IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time); + + if (!rx_enable_time) { + IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n"); + return; + } + + /* These statistics increase monotonically, and do not reset + * at each beacon. Calculate difference from last value, or just + * use the new statistics value if it has reset or wrapped around. */ + if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) + data->last_bad_plcp_cnt_cck = bad_plcp_cck; + else { + bad_plcp_cck -= data->last_bad_plcp_cnt_cck; + data->last_bad_plcp_cnt_cck += bad_plcp_cck; + } + + if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) + data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; + else { + bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; + data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; + } + + if (data->last_fa_cnt_ofdm > fa_ofdm) + data->last_fa_cnt_ofdm = fa_ofdm; + else { + fa_ofdm -= data->last_fa_cnt_ofdm; + data->last_fa_cnt_ofdm += fa_ofdm; + } + + if (data->last_fa_cnt_cck > fa_cck) + data->last_fa_cnt_cck = fa_cck; + else { + fa_cck -= data->last_fa_cnt_cck; + data->last_fa_cnt_cck += fa_cck; + } + + /* Total aborted signal locks */ + norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; + norm_fa_cck = fa_cck + bad_plcp_cck; + + IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, + bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); + + iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); + iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); + if (priv->fw->enhance_sensitivity_table) + iwl_enhance_sensitivity_write(priv); + else + iwl_sensitivity_write(priv); +} + +static inline u8 find_first_chain(u8 mask) +{ + if (mask & ANT_A) + return CHAIN_A; + if (mask & ANT_B) + return CHAIN_B; + return CHAIN_C; +} + +/** + * Run disconnected antenna algorithm to find out which antennas are + * disconnected. + */ +static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, + struct iwl_chain_noise_data *data) +{ + u32 active_chains = 0; + u32 max_average_sig; + u16 max_average_sig_antenna_i; + u8 num_tx_chains; + u8 first_chain; + u16 i = 0; + + average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS; + average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS; + average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS; + + if (average_sig[0] >= average_sig[1]) { + max_average_sig = average_sig[0]; + max_average_sig_antenna_i = 0; + active_chains = (1 << max_average_sig_antenna_i); + } else { + max_average_sig = average_sig[1]; + max_average_sig_antenna_i = 1; + active_chains = (1 << max_average_sig_antenna_i); + } + + if (average_sig[2] >= max_average_sig) { + max_average_sig = average_sig[2]; + max_average_sig_antenna_i = 2; + active_chains = (1 << max_average_sig_antenna_i); + } + + IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n", + average_sig[0], average_sig[1], average_sig[2]); + IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n", + max_average_sig, max_average_sig_antenna_i); + + /* Compare signal strengths for all 3 receivers. */ + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (i != max_average_sig_antenna_i) { + s32 rssi_delta = (max_average_sig - average_sig[i]); + + /* If signal is very weak, compared with + * strongest, mark it as disconnected. */ + if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) + data->disconn_array[i] = 1; + else + active_chains |= (1 << i); + IWL_DEBUG_CALIB(priv, "i = %d rssiDelta = %d " + "disconn_array[i] = %d\n", + i, rssi_delta, data->disconn_array[i]); + } + } + + /* + * The above algorithm sometimes fails when the ucode + * reports 0 for all chains. It's not clear why that + * happens to start with, but it is then causing trouble + * because this can make us enable more chains than the + * hardware really has. + * + * To be safe, simply mask out any chains that we know + * are not on the device. + */ + active_chains &= priv->eeprom_data->valid_rx_ant; + + num_tx_chains = 0; + for (i = 0; i < NUM_RX_CHAINS; i++) { + /* loops on all the bits of + * priv->hw_setting.valid_tx_ant */ + u8 ant_msk = (1 << i); + if (!(priv->eeprom_data->valid_tx_ant & ant_msk)) + continue; + + num_tx_chains++; + if (data->disconn_array[i] == 0) + /* there is a Tx antenna connected */ + break; + if (num_tx_chains == priv->hw_params.tx_chains_num && + data->disconn_array[i]) { + /* + * If all chains are disconnected + * connect the first valid tx chain + */ + first_chain = + find_first_chain(priv->eeprom_data->valid_tx_ant); + data->disconn_array[first_chain] = 0; + active_chains |= BIT(first_chain); + IWL_DEBUG_CALIB(priv, + "All Tx chains are disconnected W/A - declare %d as connected\n", + first_chain); + break; + } + } + + if (active_chains != priv->eeprom_data->valid_rx_ant && + active_chains != priv->chain_noise_data.active_chains) + IWL_DEBUG_CALIB(priv, + "Detected that not all antennas are connected! " + "Connected: %#x, valid: %#x.\n", + active_chains, + priv->eeprom_data->valid_rx_ant); + + /* Save for use within RXON, TX, SCAN commands, etc. */ + data->active_chains = active_chains; + IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n", + active_chains); +} + +static void iwlagn_gain_computation(struct iwl_priv *priv, + u32 average_noise[NUM_RX_CHAINS], + u8 default_chain) +{ + int i; + s32 delta_g; + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + + /* + * Find Gain Code for the chains based on "default chain" + */ + for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) { + if ((data->disconn_array[i])) { + data->delta_gain_code[i] = 0; + continue; + } + + delta_g = (priv->cfg->base_params->chain_noise_scale * + ((s32)average_noise[default_chain] - + (s32)average_noise[i])) / 1500; + + /* bound gain by 2 bits value max, 3rd bit is sign */ + data->delta_gain_code[i] = + min(abs(delta_g), + (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + + if (delta_g < 0) + /* + * set negative sign ... + * note to Intel developers: This is uCode API format, + * not the format of any internal device registers. + * Do not change this format for e.g. 6050 or similar + * devices. Change format only if more resolution + * (i.e. more than 2 bits magnitude) is needed. + */ + data->delta_gain_code[i] |= (1 << 2); + } + + IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d ANT_C = %d\n", + data->delta_gain_code[1], data->delta_gain_code[2]); + + if (!data->radio_write) { + struct iwl_calib_chain_noise_gain_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + + iwl_set_calib_hdr(&cmd.hdr, + priv->phy_calib_chain_noise_gain_cmd); + cmd.delta_gain_1 = data->delta_gain_code[1]; + cmd.delta_gain_2 = data->delta_gain_code[2]; + iwl_dvm_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + CMD_ASYNC, sizeof(cmd), &cmd); + + data->radio_write = 1; + data->state = IWL_CHAIN_NOISE_CALIBRATED; + } +} + +/* + * Accumulate 16 beacons of signal and noise statistics for each of + * 3 receivers/antennas/rx-chains, then figure out: + * 1) Which antennas are connected. + * 2) Differential rx gain settings to balance the 3 receivers. + */ +void iwl_chain_noise_calibration(struct iwl_priv *priv) +{ + struct iwl_chain_noise_data *data = NULL; + + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_sig_a; + u32 chain_sig_b; + u32 chain_sig_c; + u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; + u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; + u16 i = 0; + u16 rxon_chnum = INITIALIZATION_VALUE; + u16 stat_chnum = INITIALIZATION_VALUE; + u8 rxon_band24; + u8 stat_band24; + struct statistics_rx_non_phy *rx_info; + + /* + * MULTI-FIXME: + * When we support multiple interfaces on different channels, + * this must be modified/fixed. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED) + return; + + data = &(priv->chain_noise_data); + + /* + * Accumulate just the first "chain_noise_num_beacons" after + * the first association, then we're done forever. + */ + if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { + if (data->state == IWL_CHAIN_NOISE_ALIVE) + IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n"); + return; + } + + spin_lock_bh(&priv->statistics.lock); + + rx_info = &priv->statistics.rx_non_phy; + + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n"); + spin_unlock_bh(&priv->statistics.lock); + return; + } + + rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK); + rxon_chnum = le16_to_cpu(ctx->staging.channel); + stat_band24 = + !!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK); + stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16; + + /* Make sure we accumulate data for just the associated channel + * (even if scanning). */ + if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) { + IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n", + rxon_chnum, rxon_band24); + spin_unlock_bh(&priv->statistics.lock); + return; + } + + /* + * Accumulate beacon statistics values across + * "chain_noise_num_beacons" + */ + chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & + IN_BAND_FILTER; + chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & + IN_BAND_FILTER; + chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & + IN_BAND_FILTER; + + chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; + chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; + chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; + + spin_unlock_bh(&priv->statistics.lock); + + data->beacon_count++; + + data->chain_noise_a = (chain_noise_a + data->chain_noise_a); + data->chain_noise_b = (chain_noise_b + data->chain_noise_b); + data->chain_noise_c = (chain_noise_c + data->chain_noise_c); + + data->chain_signal_a = (chain_sig_a + data->chain_signal_a); + data->chain_signal_b = (chain_sig_b + data->chain_signal_b); + data->chain_signal_c = (chain_sig_c + data->chain_signal_c); + + IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n", + rxon_chnum, rxon_band24, data->beacon_count); + IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n", + chain_sig_a, chain_sig_b, chain_sig_c); + IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n", + chain_noise_a, chain_noise_b, chain_noise_c); + + /* If this is the "chain_noise_num_beacons", determine: + * 1) Disconnected antennas (using signal strengths) + * 2) Differential gain (using silence noise) to balance receivers */ + if (data->beacon_count != IWL_CAL_NUM_BEACONS) + return; + + /* Analyze signal for disconnected antenna */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + /* Disable disconnected antenna algorithm for advanced + bt coex, assuming valid antennas are connected */ + data->active_chains = priv->eeprom_data->valid_rx_ant; + for (i = 0; i < NUM_RX_CHAINS; i++) + if (!(data->active_chains & (1<<i))) + data->disconn_array[i] = 1; + } else + iwl_find_disconn_antenna(priv, average_sig, data); + + /* Analyze noise for rx balance */ + average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS; + average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS; + average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS; + + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (!(data->disconn_array[i]) && + (average_noise[i] <= min_average_noise)) { + /* This means that chain i is active and has + * lower noise values so far: */ + min_average_noise = average_noise[i]; + min_average_noise_antenna_i = i; + } + } + + IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n", + average_noise[0], average_noise[1], + average_noise[2]); + + IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n", + min_average_noise, min_average_noise_antenna_i); + + iwlagn_gain_computation( + priv, average_noise, + find_first_chain(priv->eeprom_data->valid_rx_ant)); + + /* Some power changes may have been made during the calibration. + * Update and commit the RXON + */ + iwl_update_chain_flags(priv); + + data->state = IWL_CHAIN_NOISE_DONE; + iwl_power_update_mode(priv, false); +} + +void iwl_reset_run_time_calib(struct iwl_priv *priv) +{ + int i; + memset(&(priv->sensitivity_data), 0, + sizeof(struct iwl_sensitivity_data)); + memset(&(priv->chain_noise_data), 0, + sizeof(struct iwl_chain_noise_data)); + for (i = 0; i < NUM_RX_CHAINS; i++) + priv->chain_noise_data.delta_gain_code[i] = + CHAIN_NOISE_DELTA_GAIN_INIT_VAL; + + /* Ask for statistics now, the uCode will send notification + * periodically after association */ + iwl_send_statistics_request(priv, CMD_ASYNC, true); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.h b/drivers/net/wireless/iwlwifi/dvm/calib.h new file mode 100644 index 00000000000..2349f393cc4 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/calib.h @@ -0,0 +1,74 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#ifndef __iwl_calib_h__ +#define __iwl_calib_h__ + +#include "dev.h" +#include "commands.h" + +void iwl_chain_noise_calibration(struct iwl_priv *priv); +void iwl_sensitivity_calibration(struct iwl_priv *priv); + +void iwl_init_sensitivity(struct iwl_priv *priv); +void iwl_reset_run_time_calib(struct iwl_priv *priv); + +#endif /* __iwl_calib_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h new file mode 100644 index 00000000000..4a361c55c54 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -0,0 +1,3995 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (commands.h) only for uCode API definitions. + * Please use iwl-xxxx-hw.h for hardware-related definitions. + * Please use dev.h for driver implementation definitions. + */ + +#ifndef __iwl_commands_h__ +#define __iwl_commands_h__ + +#include <linux/ieee80211.h> +#include <linux/types.h> + + +enum { + REPLY_ALIVE = 0x1, + REPLY_ERROR = 0x2, + REPLY_ECHO = 0x3, /* test command */ + + /* RXON and QOS commands */ + REPLY_RXON = 0x10, + REPLY_RXON_ASSOC = 0x11, + REPLY_QOS_PARAM = 0x13, + REPLY_RXON_TIMING = 0x14, + + /* Multi-Station support */ + REPLY_ADD_STA = 0x18, + REPLY_REMOVE_STA = 0x19, + REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ + REPLY_TXFIFO_FLUSH = 0x1e, + + /* Security */ + REPLY_WEPKEY = 0x20, + + /* RX, TX, LEDs */ + REPLY_TX = 0x1c, + REPLY_LEDS_CMD = 0x48, + REPLY_TX_LINK_QUALITY_CMD = 0x4e, + + /* WiMAX coexistence */ + COEX_PRIORITY_TABLE_CMD = 0x5a, + COEX_MEDIUM_NOTIFICATION = 0x5b, + COEX_EVENT_CMD = 0x5c, + + /* Calibration */ + TEMPERATURE_NOTIFICATION = 0x62, + CALIBRATION_CFG_CMD = 0x65, + CALIBRATION_RES_NOTIFICATION = 0x66, + CALIBRATION_COMPLETE_NOTIFICATION = 0x67, + + /* 802.11h related */ + REPLY_QUIET_CMD = 0x71, /* not used */ + REPLY_CHANNEL_SWITCH = 0x72, + CHANNEL_SWITCH_NOTIFICATION = 0x73, + REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, + SPECTRUM_MEASURE_NOTIFICATION = 0x75, + + /* Power Management */ + POWER_TABLE_CMD = 0x77, + PM_SLEEP_NOTIFICATION = 0x7A, + PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, + + /* Scan commands and notifications */ + REPLY_SCAN_CMD = 0x80, + REPLY_SCAN_ABORT_CMD = 0x81, + SCAN_START_NOTIFICATION = 0x82, + SCAN_RESULTS_NOTIFICATION = 0x83, + SCAN_COMPLETE_NOTIFICATION = 0x84, + + /* IBSS/AP commands */ + BEACON_NOTIFICATION = 0x90, + REPLY_TX_BEACON = 0x91, + WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ + + /* Miscellaneous commands */ + REPLY_TX_POWER_DBM_CMD = 0x95, + QUIET_NOTIFICATION = 0x96, /* not used */ + REPLY_TX_PWR_TABLE_CMD = 0x97, + REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */ + TX_ANT_CONFIGURATION_CMD = 0x98, + MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ + + /* Bluetooth device coexistence config command */ + REPLY_BT_CONFIG = 0x9b, + + /* Statistics */ + REPLY_STATISTICS_CMD = 0x9c, + STATISTICS_NOTIFICATION = 0x9d, + + /* RF-KILL commands and notifications */ + REPLY_CARD_STATE_CMD = 0xa0, + CARD_STATE_NOTIFICATION = 0xa1, + + /* Missed beacons notification */ + MISSED_BEACONS_NOTIFICATION = 0xa2, + + REPLY_CT_KILL_CONFIG_CMD = 0xa4, + SENSITIVITY_CMD = 0xa8, + REPLY_PHY_CALIBRATION_CMD = 0xb0, + REPLY_RX_PHY_CMD = 0xc0, + REPLY_RX_MPDU_CMD = 0xc1, + REPLY_RX = 0xc3, + REPLY_COMPRESSED_BA = 0xc5, + + /* BT Coex */ + REPLY_BT_COEX_PRIO_TABLE = 0xcc, + REPLY_BT_COEX_PROT_ENV = 0xcd, + REPLY_BT_COEX_PROFILE_NOTIF = 0xce, + + /* PAN commands */ + REPLY_WIPAN_PARAMS = 0xb2, + REPLY_WIPAN_RXON = 0xb3, /* use REPLY_RXON structure */ + REPLY_WIPAN_RXON_TIMING = 0xb4, /* use REPLY_RXON_TIMING structure */ + REPLY_WIPAN_RXON_ASSOC = 0xb6, /* use REPLY_RXON_ASSOC structure */ + REPLY_WIPAN_QOS_PARAM = 0xb7, /* use REPLY_QOS_PARAM structure */ + REPLY_WIPAN_WEPKEY = 0xb8, /* use REPLY_WEPKEY structure */ + REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9, + REPLY_WIPAN_NOA_NOTIFICATION = 0xbc, + REPLY_WIPAN_DEACTIVATION_COMPLETE = 0xbd, + + REPLY_WOWLAN_PATTERNS = 0xe0, + REPLY_WOWLAN_WAKEUP_FILTER = 0xe1, + REPLY_WOWLAN_TSC_RSC_PARAMS = 0xe2, + REPLY_WOWLAN_TKIP_PARAMS = 0xe3, + REPLY_WOWLAN_KEK_KCK_MATERIAL = 0xe4, + REPLY_WOWLAN_GET_STATUS = 0xe5, + REPLY_D3_CONFIG = 0xd3, + + REPLY_MAX = 0xff +}; + +/* + * Minimum number of queues. MAX_NUM is defined in hw specific files. + * Set the minimum to accommodate + * - 4 standard TX queues + * - the command queue + * - 4 PAN TX queues + * - the PAN multicast queue, and + * - the AUX (TX during scan dwell) queue. + */ +#define IWL_MIN_NUM_QUEUES 11 + +/* + * Command queue depends on iPAN support. + */ +#define IWL_DEFAULT_CMD_QUEUE_NUM 4 +#define IWL_IPAN_CMD_QUEUE_NUM 9 + +#define IWL_TX_FIFO_BK 0 /* shared */ +#define IWL_TX_FIFO_BE 1 +#define IWL_TX_FIFO_VI 2 /* shared */ +#define IWL_TX_FIFO_VO 3 +#define IWL_TX_FIFO_BK_IPAN IWL_TX_FIFO_BK +#define IWL_TX_FIFO_BE_IPAN 4 +#define IWL_TX_FIFO_VI_IPAN IWL_TX_FIFO_VI +#define IWL_TX_FIFO_VO_IPAN 5 +/* re-uses the VO FIFO, uCode will properly flush/schedule */ +#define IWL_TX_FIFO_AUX 5 +#define IWL_TX_FIFO_UNUSED 255 + +#define IWLAGN_CMD_FIFO_NUM 7 + +/* + * This queue number is required for proper operation + * because the ucode will stop/start the scheduler as + * required. + */ +#define IWL_IPAN_MCAST_QUEUE 8 + +/****************************************************************************** + * (0) + * Commonly used structures and definitions: + * Command header, rate_n_flags, txpower + * + *****************************************************************************/ + +/** + * iwlagn rate_n_flags bit fields + * + * rate_n_flags format is used in following iwlagn commands: + * REPLY_RX (response only) + * REPLY_RX_MPDU (response only) + * REPLY_TX (both command and response) + * REPLY_TX_LINK_QUALITY_CMD + * + * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): + * 2-0: 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * + * 4-3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + * + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data + * + * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * + * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): + * 6-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + */ +#define RATE_MCS_CODE_MSK 0x7 +#define RATE_MCS_SPATIAL_POS 3 +#define RATE_MCS_SPATIAL_MSK 0x18 +#define RATE_MCS_HT_DUP_POS 5 +#define RATE_MCS_HT_DUP_MSK 0x20 +/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */ +#define RATE_MCS_RATE_MSK 0xff + +/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ +#define RATE_MCS_FLAGS_POS 8 +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK 0x100 + +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS 9 +#define RATE_MCS_CCK_MSK 0x200 + +/* Bit 10: (1) Use Green Field preamble */ +#define RATE_MCS_GF_POS 10 +#define RATE_MCS_GF_MSK 0x400 + +/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */ +#define RATE_MCS_HT40_POS 11 +#define RATE_MCS_HT40_MSK 0x800 + +/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */ +#define RATE_MCS_DUP_POS 12 +#define RATE_MCS_DUP_MSK 0x1000 + +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS 13 +#define RATE_MCS_SGI_MSK 0x2000 + +/** + * rate_n_flags Tx antenna masks + * 4965 has 2 transmitters + * 5100 has 1 transmitter B + * 5150 has 1 transmitter A + * 5300 has 3 transmitters + * 5350 has 3 transmitters + * bit14:16 + */ +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK 0x04000 +#define RATE_MCS_ANT_B_MSK 0x08000 +#define RATE_MCS_ANT_C_MSK 0x10000 +#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK) +#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK) +#define RATE_ANT_NUM 3 + +#define POWER_TABLE_NUM_ENTRIES 33 +#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 +#define POWER_TABLE_CCK_ENTRY 32 + +#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24 +#define IWL_PWR_CCK_ENTRIES 2 + +/** + * struct tx_power_dual_stream + * + * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + * + * Same format as iwl_tx_power_dual_stream, but __le32 + */ +struct tx_power_dual_stream { + __le32 dw; +} __packed; + +/** + * Command REPLY_TX_POWER_DBM_CMD = 0x98 + * struct iwlagn_tx_power_dbm_cmd + */ +#define IWLAGN_TX_POWER_AUTO 0x7f +#define IWLAGN_TX_POWER_NO_CLOSED (0x1 << 6) + +struct iwlagn_tx_power_dbm_cmd { + s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 flags; + s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 reserved; +} __packed; + +/** + * Command TX_ANT_CONFIGURATION_CMD = 0x98 + * This command is used to configure valid Tx antenna. + * By default uCode concludes the valid antenna according to the radio flavor. + * This command enables the driver to override/modify this conclusion. + */ +struct iwl_tx_ant_config_cmd { + __le32 valid; +} __packed; + +/****************************************************************************** + * (0a) + * Alive and Error Commands & Responses: + * + *****************************************************************************/ + +#define UCODE_VALID_OK cpu_to_le32(0x1) + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * Its header format is: + * + * __le32 log_size; log capacity (in number of entries) + * __le32 type; (1) timestamp with each entry, (0) no timestamp + * __le32 wraps; # times uCode has wrapped to top of circular buffer + * __le32 write_index; next circular buffer entry that uCode would fill + * + * The header is followed by the circular buffer of log entries. Entries + * with timestamps have the following format: + * + * __le32 event_id; range 0 - 1500 + * __le32 timestamp; low 32 bits of TSF (of network, if associated) + * __le32 data; event_id-specific data value + * + * Entries without timestamps contain only event_id and data. + * + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. For agn, the format + * of the error log is defined by struct iwl_error_event_table. + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ + +/* + * Note: This structure is read from the device with IO accesses, + * and the reading already does the endian conversion. As it is + * read with u32-sized accesses, any members with a different size + * need to be ordered correctly though! + */ +struct iwl_error_event_table { + u32 valid; /* (nonzero) valid, (0) log is empty */ + u32 error_id; /* type of error */ + u32 pc; /* program counter */ + u32 blink1; /* branch link */ + u32 blink2; /* branch link */ + u32 ilink1; /* interrupt link */ + u32 ilink2; /* interrupt link */ + u32 data1; /* error-specific data */ + u32 data2; /* error-specific data */ + u32 line; /* source code line of error */ + u32 bcon_time; /* beacon timer */ + u32 tsf_low; /* network timestamp function timer */ + u32 tsf_hi; /* network timestamp function timer */ + u32 gp1; /* GP1 timer register */ + u32 gp2; /* GP2 timer register */ + u32 gp3; /* GP3 timer register */ + u32 ucode_ver; /* uCode version */ + u32 hw_ver; /* HW Silicon version */ + u32 brd_ver; /* HW board version */ + u32 log_pc; /* log program counter */ + u32 frame_ptr; /* frame pointer */ + u32 stack_ptr; /* stack pointer */ + u32 hcmd; /* last host command header */ + u32 isr0; /* isr status register LMPM_NIC_ISR0: + * rxtx_flag */ + u32 isr1; /* isr status register LMPM_NIC_ISR1: + * host_flag */ + u32 isr2; /* isr status register LMPM_NIC_ISR2: + * enc_flag */ + u32 isr3; /* isr status register LMPM_NIC_ISR3: + * time_flag */ + u32 isr4; /* isr status register LMPM_NIC_ISR4: + * wico interrupt */ + u32 isr_pref; /* isr status register LMPM_NIC_PREF_STAT */ + u32 wait_event; /* wait event() caller address */ + u32 l2p_control; /* L2pControlField */ + u32 l2p_duration; /* L2pDurationField */ + u32 l2p_mhvalid; /* L2pMhValidBits */ + u32 l2p_addr_match; /* L2pAddrMatchStat */ + u32 lmpm_pmg_sel; /* indicate which clocks are turned on + * (LMPM_PMG_SEL) */ + u32 u_timestamp; /* indicate when the date and time of the + * compilation */ + u32 flow_handler; /* FH read/write pointers, RX credit */ +} __packed; + +struct iwl_alive_resp { + u8 ucode_minor; + u8 ucode_major; + __le16 reserved1; + u8 sw_rev[8]; + u8 ver_type; + u8 ver_subtype; /* not "9" for runtime alive */ + __le16 reserved2; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 timestamp; + __le32 is_valid; +} __packed; + +/* + * REPLY_ERROR = 0x2 (response only, not a command) + */ +struct iwl_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le32 error_info; + __le64 timestamp; +} __packed; + +/****************************************************************************** + * (1) + * RXON Commands & Responses: + * + *****************************************************************************/ + +/* + * Rx config defines & structure + */ +/* rx_config device types */ +enum { + RXON_DEV_TYPE_AP = 1, + RXON_DEV_TYPE_ESS = 3, + RXON_DEV_TYPE_IBSS = 4, + RXON_DEV_TYPE_SNIFFER = 6, + RXON_DEV_TYPE_CP = 7, + RXON_DEV_TYPE_2STA = 8, + RXON_DEV_TYPE_P2P = 9, +}; + + +#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0) +#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0) +#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1) +#define RXON_RX_CHAIN_VALID_POS (1) +#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4) +#define RXON_RX_CHAIN_FORCE_SEL_POS (4) +#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7) +#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) +#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10) +#define RXON_RX_CHAIN_CNT_POS (10) +#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12) +#define RXON_RX_CHAIN_MIMO_CNT_POS (12) +#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14) +#define RXON_RX_CHAIN_MIMO_FORCE_POS (14) + +/* rx_config flags */ +/* band & modulation selection */ +#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0) +#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1) +/* auto detection enable */ +#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2) +/* TGg protection when tx */ +#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3) +/* cck short slot & preamble */ +#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4) +#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5) +/* antenna selection */ +#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7) +#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00) +#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8) +#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9) +/* radar detection enable */ +#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12) +#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13) +/* rx response to host with 8-byte TSF +* (according to ON_AIR deassertion) */ +#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15) + + +/* HT flags */ +#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) +#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22) + +#define RXON_FLG_HT_OPERATING_MODE_POS (23) + +#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23) +#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23) + +#define RXON_FLG_CHANNEL_MODE_POS (25) +#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25) + +/* channel mode */ +enum { + CHANNEL_MODE_LEGACY = 0, + CHANNEL_MODE_PURE_40 = 1, + CHANNEL_MODE_MIXED = 2, + CHANNEL_MODE_RESERVED = 3, +}; +#define RXON_FLG_CHANNEL_MODE_LEGACY cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS) +#define RXON_FLG_CHANNEL_MODE_PURE_40 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS) +#define RXON_FLG_CHANNEL_MODE_MIXED cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS) + +/* CTS to self (if spec allows) flag */ +#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30) + +/* rx_config filter flags */ +/* accept all data frames */ +#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0) +/* pass control & management to host */ +#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1) +/* accept multi-cast */ +#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2) +/* don't decrypt uni-cast frames */ +#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3) +/* don't decrypt multi-cast frames */ +#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4) +/* STA is associated */ +#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5) +/* transfer to host non bssid beacons in associated state */ +#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6) + +/** + * REPLY_RXON = 0x10 (command, has simple generic response) + * + * RXON tunes the radio tuner to a service channel, and sets up a number + * of parameters that are used primarily for Rx, but also for Tx operations. + * + * NOTE: When tuning to a new channel, driver must set the + * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent + * info within the device, including the station tables, tx retry + * rate tables, and txpower tables. Driver must build a new station + * table and txpower table before transmitting anything on the RXON + * channel. + * + * NOTE: All RXONs wipe clean the internal txpower table. Driver must + * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), + * regardless of whether RXON_FILTER_ASSOC_MSK is set. + */ + +struct iwl_rxon_cmd { + u8 node_addr[6]; + __le16 reserved1; + u8 bssid_addr[6]; + __le16 reserved2; + u8 wlap_bssid_addr[6]; + __le16 reserved3; + u8 dev_type; + u8 air_propagation; + __le16 rx_chain; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 assoc_id; + __le32 flags; + __le32 filter_flags; + __le16 channel; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; + u8 ofdm_ht_triple_stream_basic_rates; + u8 reserved5; + __le16 acquisition_data; + __le16 reserved6; +} __packed; + +/* + * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) + */ +struct iwl_rxon_assoc_cmd { + __le32 flags; + __le32 filter_flags; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 reserved1; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; + u8 ofdm_ht_triple_stream_basic_rates; + u8 reserved2; + __le16 rx_chain_select_flags; + __le16 acquisition_data; + __le32 reserved3; +} __packed; + +#define IWL_CONN_MAX_LISTEN_INTERVAL 10 +#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */ + +/* + * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) + */ +struct iwl_rxon_time_cmd { + __le64 timestamp; + __le16 beacon_interval; + __le16 atim_window; + __le32 beacon_init_val; + __le16 listen_interval; + u8 dtim_period; + u8 delta_cp_bss_tbtts; +} __packed; + +/* + * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) + */ +/** + * struct iwl5000_channel_switch_cmd + * @band: 0- 5.2GHz, 1- 2.4GHz + * @expect_beacon: 0- resume transmits after channel switch + * 1- wait for beacon to resume transmits + * @channel: new channel number + * @rxon_flags: Rx on flags + * @rxon_filter_flags: filtering parameters + * @switch_time: switch time in extended beacon format + * @reserved: reserved bytes + */ +struct iwl5000_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + __le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; +} __packed; + +/** + * struct iwl6000_channel_switch_cmd + * @band: 0- 5.2GHz, 1- 2.4GHz + * @expect_beacon: 0- resume transmits after channel switch + * 1- wait for beacon to resume transmits + * @channel: new channel number + * @rxon_flags: Rx on flags + * @rxon_filter_flags: filtering parameters + * @switch_time: switch time in extended beacon format + * @reserved: reserved bytes + */ +struct iwl6000_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + __le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; +} __packed; + +/* + * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) + */ +struct iwl_csa_notification { + __le16 band; + __le16 channel; + __le32 status; /* 0 - OK, 1 - fail */ +} __packed; + +/****************************************************************************** + * (2) + * Quality-of-Service (QOS) Commands & Responses: + * + *****************************************************************************/ + +/** + * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM + * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd + * + * @cw_min: Contention window, start value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x0f. + * @cw_max: Contention window, max value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x3f. + * @aifsn: Number of slots in Arbitration Interframe Space (before + * performing random backoff timing prior to Tx). Device default 1. + * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. + * + * Device will automatically increase contention window by (2*CW) + 1 for each + * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW + * value, to cap the CW value. + */ +struct iwl_ac_qos { + __le16 cw_min; + __le16 cw_max; + u8 aifsn; + u8 reserved1; + __le16 edca_txop; +} __packed; + +/* QoS flags defines */ +#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01) +#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02) +#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10) + +/* Number of Access Categories (AC) (EDCA), queues 0..3 */ +#define AC_NUM 4 + +/* + * REPLY_QOS_PARAM = 0x13 (command, has simple generic response) + * + * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs + * 0: Background, 1: Best Effort, 2: Video, 3: Voice. + */ +struct iwl_qosparam_cmd { + __le32 qos_flags; + struct iwl_ac_qos ac[AC_NUM]; +} __packed; + +/****************************************************************************** + * (3) + * Add/Modify Stations Commands & Responses: + * + *****************************************************************************/ +/* + * Multi station support + */ + +/* Special, dedicated locations within device's station table */ +#define IWL_AP_ID 0 +#define IWL_AP_ID_PAN 1 +#define IWL_STA_ID 2 +#define IWLAGN_PAN_BCAST_ID 14 +#define IWLAGN_BROADCAST_ID 15 +#define IWLAGN_STATION_COUNT 16 + +#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT + +#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2) +#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8) +#define STA_FLG_PAN_STATION cpu_to_le32(1 << 13) +#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17) +#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18) +#define STA_FLG_MAX_AGG_SIZE_POS (19) +#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19) +#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21) +#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22) +#define STA_FLG_AGG_MPDU_DENSITY_POS (23) +#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23) + +/* Use in mode field. 1: modify existing entry, 0: add new station entry */ +#define STA_CONTROL_MODIFY_MSK 0x01 + +/* key flags __le16*/ +#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007) +#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000) +#define STA_KEY_FLG_WEP cpu_to_le16(0x0001) +#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002) +#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003) + +#define STA_KEY_FLG_KEYID_POS 8 +#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800) +/* wep key is either from global key (0) or from station info array (1) */ +#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008) + +/* wep key in STA: 5-bytes (0) or 13-bytes (1) */ +#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000) +#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000) +#define STA_KEY_MAX_NUM 8 +#define STA_KEY_MAX_NUM_PAN 16 +/* must not match WEP_INVALID_OFFSET */ +#define IWLAGN_HW_KEY_DEFAULT 0xfe + +/* Flags indicate whether to modify vs. don't change various station params */ +#define STA_MODIFY_KEY_MASK 0x01 +#define STA_MODIFY_TID_DISABLE_TX 0x02 +#define STA_MODIFY_TX_RATE_MSK 0x04 +#define STA_MODIFY_ADDBA_TID_MSK 0x08 +#define STA_MODIFY_DELBA_TID_MSK 0x10 +#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20 + +/* Receiver address (actually, Rx station's index into station table), + * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ +#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) + +/* agn */ +struct iwl_keyinfo { + __le16 key_flags; + u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ + u8 reserved1; + __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ + u8 key_offset; + u8 reserved2; + u8 key[16]; /* 16-byte unicast decryption key */ + __le64 tx_secur_seq_cnt; + __le64 hw_tkip_mic_rx_key; + __le64 hw_tkip_mic_tx_key; +} __packed; + +/** + * struct sta_id_modify + * @addr[ETH_ALEN]: station's MAC address + * @sta_id: index of station in uCode's station table + * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change + * + * Driver selects unused table index when adding new station, + * or the index to a pre-existing station entry when modifying that station. + * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP). + * + * modify_mask flags select which parameters to modify vs. leave alone. + */ +struct sta_id_modify { + u8 addr[ETH_ALEN]; + __le16 reserved1; + u8 sta_id; + u8 modify_mask; + __le16 reserved2; +} __packed; + +/* + * REPLY_ADD_STA = 0x18 (command) + * + * The device contains an internal table of per-station information, + * with info on security keys, aggregation parameters, and Tx rates for + * initial Tx attempt and any retries (agn devices uses + * REPLY_TX_LINK_QUALITY_CMD, + * + * REPLY_ADD_STA sets up the table entry for one station, either creating + * a new entry, or modifying a pre-existing one. + * + * NOTE: RXON command (without "associated" bit set) wipes the station table + * clean. Moving into RF_KILL state does this also. Driver must set up + * new station table before transmitting anything on the RXON channel + * (except active scans or active measurements; those commands carry + * their own txpower/rate setup data). + * + * When getting started on a new channel, driver must set up the + * IWL_BROADCAST_ID entry (last entry in the table). For a client + * station in a BSS, once an AP is selected, driver sets up the AP STA + * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP + * are all that are needed for a BSS client station. If the device is + * used as AP, or in an IBSS network, driver must set up station table + * entries for all STAs in network, starting with index IWL_STA_ID. + */ + +struct iwl_addsta_cmd { + u8 mode; /* 1: modify existing, 0: add new station */ + u8 reserved[3]; + struct sta_id_modify sta; + struct iwl_keyinfo key; + __le32 station_flags; /* STA_FLG_* */ + __le32 station_flags_msk; /* STA_FLG_* */ + + /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) + * corresponding to bit (e.g. bit 5 controls TID 5). + * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ + __le16 tid_disable_tx; + __le16 legacy_reserved; + + /* TID for which to add block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + u8 add_immediate_ba_tid; + + /* TID for which to remove block-ack support. + * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ + u8 remove_immediate_ba_tid; + + /* Starting Sequence Number for added block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + __le16 add_immediate_ba_ssn; + + /* + * Number of packets OK to transmit to station even though + * it is asleep -- used to synchronise PS-poll and u-APSD + * responses while ucode keeps track of STA sleep state. + */ + __le16 sleep_tx_count; + + __le16 reserved2; +} __packed; + + +#define ADD_STA_SUCCESS_MSK 0x1 +#define ADD_STA_NO_ROOM_IN_TABLE 0x2 +#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 +#define ADD_STA_MODIFY_NON_EXIST_STA 0x8 +/* + * REPLY_ADD_STA = 0x18 (response) + */ +struct iwl_add_sta_resp { + u8 status; /* ADD_STA_* */ +} __packed; + +#define REM_STA_SUCCESS_MSK 0x1 +/* + * REPLY_REM_STA = 0x19 (response) + */ +struct iwl_rem_sta_resp { + u8 status; +} __packed; + +/* + * REPLY_REM_STA = 0x19 (command) + */ +struct iwl_rem_sta_cmd { + u8 num_sta; /* number of removed stations */ + u8 reserved[3]; + u8 addr[ETH_ALEN]; /* MAC addr of the first station */ + u8 reserved2[2]; +} __packed; + + +/* WiFi queues mask */ +#define IWL_SCD_BK_MSK cpu_to_le32(BIT(0)) +#define IWL_SCD_BE_MSK cpu_to_le32(BIT(1)) +#define IWL_SCD_VI_MSK cpu_to_le32(BIT(2)) +#define IWL_SCD_VO_MSK cpu_to_le32(BIT(3)) +#define IWL_SCD_MGMT_MSK cpu_to_le32(BIT(3)) + +/* PAN queues mask */ +#define IWL_PAN_SCD_BK_MSK cpu_to_le32(BIT(4)) +#define IWL_PAN_SCD_BE_MSK cpu_to_le32(BIT(5)) +#define IWL_PAN_SCD_VI_MSK cpu_to_le32(BIT(6)) +#define IWL_PAN_SCD_VO_MSK cpu_to_le32(BIT(7)) +#define IWL_PAN_SCD_MGMT_MSK cpu_to_le32(BIT(7)) +#define IWL_PAN_SCD_MULTICAST_MSK cpu_to_le32(BIT(8)) + +#define IWL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00) + +#define IWL_DROP_SINGLE 0 +#define IWL_DROP_ALL (BIT(IWL_RXON_CTX_BSS) | BIT(IWL_RXON_CTX_PAN)) + +/* + * REPLY_TXFIFO_FLUSH = 0x1e(command and response) + * + * When using full FIFO flush this command checks the scheduler HW block WR/RD + * pointers to check if all the frames were transferred by DMA into the + * relevant TX FIFO queue. Only when the DMA is finished and the queue is + * empty the command can finish. + * This command is used to flush the TXFIFO from transmit commands, it may + * operate on single or multiple queues, the command queue can't be flushed by + * this command. The command response is returned when all the queue flush + * operations are done. Each TX command flushed return response with the FLUSH + * status set in the TX response status. When FIFO flush operation is used, + * the flush operation ends when both the scheduler DMA done and TXFIFO empty + * are set. + * + * @fifo_control: bit mask for which queues to flush + * @flush_control: flush controls + * 0: Dump single MSDU + * 1: Dump multiple MSDU according to PS, INVALID STA, TTL, TID disable. + * 2: Dump all FIFO + */ +struct iwl_txfifo_flush_cmd { + __le32 fifo_control; + __le16 flush_control; + __le16 reserved; +} __packed; + +/* + * REPLY_WEP_KEY = 0x20 + */ +struct iwl_wep_key { + u8 key_index; + u8 key_offset; + u8 reserved1[2]; + u8 key_size; + u8 reserved2[3]; + u8 key[16]; +} __packed; + +struct iwl_wep_cmd { + u8 num_keys; + u8 global_key_type; + u8 flags; + u8 reserved; + struct iwl_wep_key key[0]; +} __packed; + +#define WEP_KEY_WEP_TYPE 1 +#define WEP_KEYS_MAX 4 +#define WEP_INVALID_OFFSET 0xff +#define WEP_KEY_LEN_64 5 +#define WEP_KEY_LEN_128 13 + +/****************************************************************************** + * (4) + * Rx Responses: + * + *****************************************************************************/ + +#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0) +#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1) + +#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0) +#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) +#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) +#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) +#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0 +#define RX_RES_PHY_FLAGS_ANTENNA_POS 4 + +#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) +#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) +#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) +#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) +#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) +#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) + +#define RX_RES_STATUS_STATION_FOUND (1<<6) +#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) + +#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) +#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) +#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) +#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) +#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) + +#define RX_MPDU_RES_STATUS_ICV_OK (0x20) +#define RX_MPDU_RES_STATUS_MIC_OK (0x40) +#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) +#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) + + +#define IWLAGN_RX_RES_PHY_CNT 8 +#define IWLAGN_RX_RES_AGC_IDX 1 +#define IWLAGN_RX_RES_RSSI_AB_IDX 2 +#define IWLAGN_RX_RES_RSSI_C_IDX 3 +#define IWLAGN_OFDM_AGC_MSK 0xfe00 +#define IWLAGN_OFDM_AGC_BIT_POS 9 +#define IWLAGN_OFDM_RSSI_INBAND_A_BITMSK 0x00ff +#define IWLAGN_OFDM_RSSI_ALLBAND_A_BITMSK 0xff00 +#define IWLAGN_OFDM_RSSI_A_BIT_POS 0 +#define IWLAGN_OFDM_RSSI_INBAND_B_BITMSK 0xff0000 +#define IWLAGN_OFDM_RSSI_ALLBAND_B_BITMSK 0xff000000 +#define IWLAGN_OFDM_RSSI_B_BIT_POS 16 +#define IWLAGN_OFDM_RSSI_INBAND_C_BITMSK 0x00ff +#define IWLAGN_OFDM_RSSI_ALLBAND_C_BITMSK 0xff00 +#define IWLAGN_OFDM_RSSI_C_BIT_POS 0 + +struct iwlagn_non_cfg_phy { + __le32 non_cfg_phy[IWLAGN_RX_RES_PHY_CNT]; /* up to 8 phy entries */ +} __packed; + + +/* + * REPLY_RX = 0xc3 (response only, not a command) + * Used only for legacy (non 11n) frames. + */ +struct iwl_rx_phy_res { + u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ + u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ + u8 stat_id; /* configurable DSP phy data set ID */ + u8 reserved1; + __le64 timestamp; /* TSF at on air rise */ + __le32 beacon_time_stamp; /* beacon at on-air rise */ + __le16 phy_flags; /* general phy flags: band, modulation, ... */ + __le16 channel; /* channel number */ + u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ + __le32 rate_n_flags; /* RATE_MCS_* */ + __le16 byte_count; /* frame's byte-count */ + __le16 frame_time; /* frame's time on the air */ +} __packed; + +struct iwl_rx_mpdu_res_start { + __le16 byte_count; + __le16 reserved; +} __packed; + + +/****************************************************************************** + * (5) + * Tx Commands & Responses: + * + * Driver must place each REPLY_TX command into one of the prioritized Tx + * queues in host DRAM, shared between driver and device (see comments for + * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode + * are preparing to transmit, the device pulls the Tx command over the PCI + * bus via one of the device's Tx DMA channels, to fill an internal FIFO + * from which data will be transmitted. + * + * uCode handles all timing and protocol related to control frames + * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler + * handle reception of block-acks; uCode updates the host driver via + * REPLY_COMPRESSED_BA. + * + * uCode handles retrying Tx when an ACK is expected but not received. + * This includes trying lower data rates than the one requested in the Tx + * command, as set up by the REPLY_TX_LINK_QUALITY_CMD (agn). + * + * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD. + * This command must be executed after every RXON command, before Tx can occur. + *****************************************************************************/ + +/* REPLY_TX Tx flags field */ + +/* + * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it + * before this frame. if CTS-to-self required check + * RXON_FLG_SELF_CTS_EN status. + */ +#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0) + +/* 1: Expect ACK from receiving station + * 0: Don't expect ACK (MAC header's duration field s/b 0) + * Set this for unicast frames, but not broadcast/multicast. */ +#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3) + +/* For agn devices: + * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD). + * Tx command's initial_rate_index indicates first rate to try; + * uCode walks through table for additional Tx attempts. + * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. + * This rate will be used for all Tx attempts; it will not be scaled. */ +#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4) + +/* 1: Expect immediate block-ack. + * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ +#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6) + +/* Tx antenna selection field; reserved (0) for agn devices. */ +#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00) + +/* 1: Ignore Bluetooth priority for this frame. + * 0: Delay Tx until Bluetooth device is done (normal usage). */ +#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12) + +/* 1: uCode overrides sequence control field in MAC header. + * 0: Driver provides sequence control field in MAC header. + * Set this for management frames, non-QOS data frames, non-unicast frames, + * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */ +#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13) + +/* 1: This frame is non-last MPDU; more fragments are coming. + * 0: Last fragment, or not using fragmentation. */ +#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14) + +/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. + * 0: No TSF required in outgoing frame. + * Set this for transmitting beacons and probe responses. */ +#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16) + +/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword + * alignment of frame's payload data field. + * 0: No pad + * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 + * field (but not both). Driver must align frame data (i.e. data following + * MAC header) to DWORD boundary. */ +#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20) + +/* accelerate aggregation support + * 0 - no CCMP encryption; 1 - CCMP encryption */ +#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22) + +/* HCCA-AP - disable duration overwriting. */ +#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25) + + +/* + * TX command security control + */ +#define TX_CMD_SEC_WEP 0x01 +#define TX_CMD_SEC_CCM 0x02 +#define TX_CMD_SEC_TKIP 0x03 +#define TX_CMD_SEC_MSK 0x03 +#define TX_CMD_SEC_SHIFT 6 +#define TX_CMD_SEC_KEY128 0x08 + +/* + * security overhead sizes + */ +#define WEP_IV_LEN 4 +#define WEP_ICV_LEN 4 +#define CCMP_MIC_LEN 8 +#define TKIP_ICV_LEN 4 + +/* + * REPLY_TX = 0x1c (command) + */ + +/* + * 4965 uCode updates these Tx attempt count values in host DRAM. + * Used for managing Tx retries when expecting block-acks. + * Driver should set these fields to 0. + */ +struct iwl_dram_scratch { + u8 try_cnt; /* Tx attempts */ + u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ + __le16 reserved; +} __packed; + +struct iwl_tx_cmd { + /* + * MPDU byte count: + * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * NOTE: Does not include Tx command bytes, post-MAC pad bytes, + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i + * Range: 14-2342 bytes. + */ + __le16 len; + + /* + * MPDU or MSDU byte count for next frame. + * Used for fragmentation and bursting, but not 11n aggregation. + * Same as "len", but for next frame. Set to 0 if not applicable. + */ + __le16 next_frame_len; + + __le32 tx_flags; /* TX_CMD_FLG_* */ + + /* uCode may modify this field of the Tx command (in host DRAM!). + * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ + struct iwl_dram_scratch scratch; + + /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* Index of destination station in uCode's station table */ + u8 sta_id; + + /* Type of security encryption: CCM or TKIP */ + u8 sec_ctl; /* TX_CMD_SEC_* */ + + /* + * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial + * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for + * data frames, this field may be used to selectively reduce initial + * rate (via non-0 value) for special frames (e.g. management), while + * still supporting rate scaling for all frames. + */ + u8 initial_rate_index; + u8 reserved; + u8 key[16]; + __le16 next_frame_flags; + __le16 reserved2; + union { + __le32 life_time; + __le32 attempt; + } stop_time; + + /* Host DRAM physical address pointer to "scratch" in this command. + * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ + __le32 dram_lsb_ptr; + u8 dram_msb_ptr; + + u8 rts_retry_limit; /*byte 50 */ + u8 data_retry_limit; /*byte 51 */ + u8 tid_tspec; + union { + __le16 pm_frame_timeout; + __le16 attempt_duration; + } timeout; + + /* + * Duration of EDCA burst Tx Opportunity, in 32-usec units. + * Set this if txop time is not specified by HCCA protocol (e.g. by AP). + */ + __le16 driver_txop; + + /* + * MAC header goes here, followed by 2 bytes padding if MAC header + * length is 26 or 30 bytes, followed by payload data + */ + u8 payload[0]; + struct ieee80211_hdr hdr[0]; +} __packed; + +/* + * TX command response is sent after *agn* transmission attempts. + * + * both postpone and abort status are expected behavior from uCode. there is + * no special operation required from driver; except for RFKILL_FLUSH, + * which required tx flush host command to flush all the tx frames in queues + */ +enum { + TX_STATUS_SUCCESS = 0x01, + TX_STATUS_DIRECT_DONE = 0x02, + /* postpone TX */ + TX_STATUS_POSTPONE_DELAY = 0x40, + TX_STATUS_POSTPONE_FEW_BYTES = 0x41, + TX_STATUS_POSTPONE_BT_PRIO = 0x42, + TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, + TX_STATUS_POSTPONE_CALC_TTAK = 0x44, + /* abort TX */ + TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, + TX_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, + TX_STATUS_FAIL_DRAIN_FLOW = 0x85, + TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, + TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_STATUS_FAIL_DEST_PS = 0x88, + TX_STATUS_FAIL_HOST_ABORTED = 0x89, + TX_STATUS_FAIL_BT_RETRY = 0x8a, + TX_STATUS_FAIL_STA_INVALID = 0x8b, + TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, + TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, + TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90, + TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, +}; + +#define TX_PACKET_MODE_REGULAR 0x0000 +#define TX_PACKET_MODE_BURST_SEQ 0x0100 +#define TX_PACKET_MODE_BURST_FIRST 0x0200 + +enum { + TX_POWER_PA_NOT_ACTIVE = 0x0, +}; + +enum { + TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ + TX_STATUS_DELAY_MSK = 0x00000040, + TX_STATUS_ABORT_MSK = 0x00000080, + TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ + TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ + TX_RESERVED = 0x00780000, /* bits 19:22 */ + TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ + TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ +}; + +/* ******************************* + * TX aggregation status + ******************************* */ + +enum { + AGG_TX_STATE_TRANSMITTED = 0x00, + AGG_TX_STATE_UNDERRUN_MSK = 0x01, + AGG_TX_STATE_BT_PRIO_MSK = 0x02, + AGG_TX_STATE_FEW_BYTES_MSK = 0x04, + AGG_TX_STATE_ABORT_MSK = 0x08, + AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, + AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, + AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40, + AGG_TX_STATE_SCD_QUERY_MSK = 0x80, + AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, + AGG_TX_STATE_RESPONSE_MSK = 0x1ff, + AGG_TX_STATE_DUMP_TX_MSK = 0x200, + AGG_TX_STATE_DELAY_TX_MSK = 0x400 +}; + +#define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */ +#define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */ + +#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \ + AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \ + AGG_TX_STATE_LAST_SENT_BT_KILL_MSK) + +/* # tx attempts for first frame in aggregation */ +#define AGG_TX_STATE_TRY_CNT_POS 12 +#define AGG_TX_STATE_TRY_CNT_MSK 0xf000 + +/* Command ID and sequence number of Tx command for this frame */ +#define AGG_TX_STATE_SEQ_NUM_POS 16 +#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 + +/* + * REPLY_TX = 0x1c (response) + * + * This response may be in one of two slightly different formats, indicated + * by the frame_count field: + * + * 1) No aggregation (frame_count == 1). This reports Tx results for + * a single frame. Multiple attempts, at various bit rates, may have + * been made for this frame. + * + * 2) Aggregation (frame_count > 1). This reports Tx results for + * 2 or more frames that used block-acknowledge. All frames were + * transmitted at same rate. Rate scaling may have been used if first + * frame in this new agg block failed in previous agg block(s). + * + * Note that, for aggregation, ACK (block-ack) status is not delivered here; + * block-ack has not been received by the time the agn device records + * this status. + * This status relates to reasons the tx might have been blocked or aborted + * within the sending station (this agn device), rather than whether it was + * received successfully by the destination station. + */ +struct agg_tx_status { + __le16 status; + __le16 sequence; +} __packed; + +/* + * definitions for initial rate index field + * bits [3:0] initial rate index + * bits [6:4] rate table color, used for the initial rate + * bit-7 invalid rate indication + * i.e. rate was not chosen from rate table + * or rate table color was changed during frame retries + * refer tlc rate info + */ + +#define IWL50_TX_RES_INIT_RATE_INDEX_POS 0 +#define IWL50_TX_RES_INIT_RATE_INDEX_MSK 0x0f +#define IWL50_TX_RES_RATE_TABLE_COLOR_POS 4 +#define IWL50_TX_RES_RATE_TABLE_COLOR_MSK 0x70 +#define IWL50_TX_RES_INV_RATE_INDEX_MSK 0x80 + +/* refer to ra_tid */ +#define IWLAGN_TX_RES_TID_POS 0 +#define IWLAGN_TX_RES_TID_MSK 0x0f +#define IWLAGN_TX_RES_RA_POS 4 +#define IWLAGN_TX_RES_RA_MSK 0xf0 + +struct iwlagn_tx_resp { + u8 frame_count; /* 1 no aggregation, >1 aggregation */ + u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ + u8 failure_rts; /* # failures due to unsuccessful RTS */ + u8 failure_frame; /* # failures due to no ACK (unused for agg) */ + + /* For non-agg: Rate at which frame was successful. + * For agg: Rate at which all frames were transmitted. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* For non-agg: RTS + CTS + frame tx attempts time + ACK. + * For agg: RTS + CTS + aggregation tx time + block-ack time. */ + __le16 wireless_media_time; /* uSecs */ + + u8 pa_status; /* RF power amplifier measurement (not used) */ + u8 pa_integ_res_a[3]; + u8 pa_integ_res_b[3]; + u8 pa_integ_res_C[3]; + + __le32 tfd_info; + __le16 seq_ctl; + __le16 byte_cnt; + u8 tlc_info; + u8 ra_tid; /* tid (0:3), sta_id (4:7) */ + __le16 frame_ctrl; + /* + * For non-agg: frame status TX_STATUS_* + * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status + * fields follow this one, up to frame_count. + * Bit fields: + * 11- 0: AGG_TX_STATE_* status code + * 15-12: Retry count for 1st frame in aggregation (retries + * occur if tx failed for this frame when it was a + * member of a previous aggregation block). If rate + * scaling is used, retry count indicates the rate + * table entry used for all frames in the new agg. + * 31-16: Sequence # for this frame's Tx cmd (not SSN!) + */ + struct agg_tx_status status; /* TX status (in aggregation - + * status of 1st frame) */ +} __packed; +/* + * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command) + * + * Reports Block-Acknowledge from recipient station + */ +struct iwl_compressed_ba_resp { + __le32 sta_addr_lo32; + __le16 sta_addr_hi16; + __le16 reserved; + + /* Index of recipient (BA-sending) station in uCode's station table */ + u8 sta_id; + u8 tid; + __le16 seq_ctl; + __le64 bitmap; + __le16 scd_flow; + __le16 scd_ssn; + u8 txed; /* number of frames sent */ + u8 txed_2_done; /* number of frames acked */ +} __packed; + +/* + * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) + * + */ + +/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ +#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) + +/* # of EDCA prioritized tx fifos */ +#define LINK_QUAL_AC_NUM AC_NUM + +/* # entries in rate scale table to support Tx retries */ +#define LINK_QUAL_MAX_RETRY_NUM 16 + +/* Tx antenna selection values */ +#define LINK_QUAL_ANT_A_MSK (1 << 0) +#define LINK_QUAL_ANT_B_MSK (1 << 1) +#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) + + +/** + * struct iwl_link_qual_general_params + * + * Used in REPLY_TX_LINK_QUALITY_CMD + */ +struct iwl_link_qual_general_params { + u8 flags; + + /* No entries at or above this (driver chosen) index contain MIMO */ + u8 mimo_delimiter; + + /* Best single antenna to use for single stream (legacy, SISO). */ + u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ + + /* Best antennas to use for MIMO (unused for 4965, assumes both). */ + u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ + + /* + * If driver needs to use different initial rates for different + * EDCA QOS access categories (as implemented by tx fifos 0-3), + * this table will set that up, by indicating the indexes in the + * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. + * Otherwise, driver should set all entries to 0. + * + * Entry usage: + * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice + * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. + */ + u8 start_rate_index[LINK_QUAL_AC_NUM]; +} __packed; + +#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ +#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) +#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) + +#define LINK_QUAL_AGG_DISABLE_START_DEF (3) +#define LINK_QUAL_AGG_DISABLE_START_MAX (255) +#define LINK_QUAL_AGG_DISABLE_START_MIN (0) + +#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) + +/** + * struct iwl_link_qual_agg_params + * + * Used in REPLY_TX_LINK_QUALITY_CMD + */ +struct iwl_link_qual_agg_params { + + /* + *Maximum number of uSec in aggregation. + * default set to 4000 (4 milliseconds) if not configured in .cfg + */ + __le16 agg_time_limit; + + /* + * Number of Tx retries allowed for a frame, before that frame will + * no longer be considered for the start of an aggregation sequence + * (scheduler will then try to tx it as single frame). + * Driver should set this to 3. + */ + u8 agg_dis_start_th; + + /* + * Maximum number of frames in aggregation. + * 0 = no limit (default). 1 = no aggregation. + * Other values = max # frames in aggregation. + */ + u8 agg_frame_cnt_limit; + + __le32 reserved; +} __packed; + +/* + * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) + * + * For agn devices + * + * Each station in the agn device's internal station table has its own table + * of 16 + * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when + * an ACK is not received. This command replaces the entire table for + * one station. + * + * NOTE: Station must already be in agn device's station table. + * Use REPLY_ADD_STA. + * + * The rate scaling procedures described below work well. Of course, other + * procedures are possible, and may work better for particular environments. + * + * + * FILLING THE RATE TABLE + * + * Given a particular initial rate and mode, as determined by the rate + * scaling algorithm described below, the Linux driver uses the following + * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the + * Link Quality command: + * + * + * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: + * a) Use this same initial rate for first 3 entries. + * b) Find next lower available rate using same mode (SISO or MIMO), + * use for next 3 entries. If no lower rate available, switch to + * legacy mode (no HT40 channel, no MIMO, no short guard interval). + * c) If using MIMO, set command's mimo_delimiter to number of entries + * using MIMO (3 or 6). + * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel, + * no MIMO, no short guard interval), at the next lower bit rate + * (e.g. if second HT bit rate was 54, try 48 legacy), and follow + * legacy procedure for remaining table entries. + * + * 2) If using legacy initial rate: + * a) Use the initial rate for only one entry. + * b) For each following entry, reduce the rate to next lower available + * rate, until reaching the lowest available rate. + * c) When reducing rate, also switch antenna selection. + * d) Once lowest available rate is reached, repeat this rate until + * rate table is filled (16 entries), switching antenna each entry. + * + * + * ACCUMULATING HISTORY + * + * The rate scaling algorithm for agn devices, as implemented in Linux driver, + * uses two sets of frame Tx success history: One for the current/active + * modulation mode, and one for a speculative/search mode that is being + * attempted. If the speculative mode turns out to be more effective (i.e. + * actual transfer rate is better), then the driver continues to use the + * speculative mode as the new current active mode. + * + * Each history set contains, separately for each possible rate, data for a + * sliding window of the 62 most recent tx attempts at that rate. The data + * includes a shifting bitmap of success(1)/failure(0), and sums of successful + * and attempted frames, from which the driver can additionally calculate a + * success ratio (success / attempted) and number of failures + * (attempted - success), and control the size of the window (attempted). + * The driver uses the bit map to remove successes from the success sum, as + * the oldest tx attempts fall out of the window. + * + * When the agn device makes multiple tx attempts for a given frame, each + * attempt might be at a different rate, and have different modulation + * characteristics (e.g. antenna, fat channel, short guard interval), as set + * up in the rate scaling table in the Link Quality command. The driver must + * determine which rate table entry was used for each tx attempt, to determine + * which rate-specific history to update, and record only those attempts that + * match the modulation characteristics of the history set. + * + * When using block-ack (aggregation), all frames are transmitted at the same + * rate, since there is no per-attempt acknowledgment from the destination + * station. The Tx response struct iwl_tx_resp indicates the Tx rate in + * rate_n_flags field. After receiving a block-ack, the driver can update + * history for the entire block all at once. + * + * + * FINDING BEST STARTING RATE: + * + * When working with a selected initial modulation mode (see below), the + * driver attempts to find a best initial rate. The initial rate is the + * first entry in the Link Quality command's rate table. + * + * 1) Calculate actual throughput (success ratio * expected throughput, see + * table below) for current initial rate. Do this only if enough frames + * have been attempted to make the value meaningful: at least 6 failed + * tx attempts, or at least 8 successes. If not enough, don't try rate + * scaling yet. + * + * 2) Find available rates adjacent to current initial rate. Available means: + * a) supported by hardware && + * b) supported by association && + * c) within any constraints selected by user + * + * 3) Gather measured throughputs for adjacent rates. These might not have + * enough history to calculate a throughput. That's okay, we might try + * using one of them anyway! + * + * 4) Try decreasing rate if, for current rate: + * a) success ratio is < 15% || + * b) lower adjacent rate has better measured throughput || + * c) higher adjacent rate has worse throughput, and lower is unmeasured + * + * As a sanity check, if decrease was determined above, leave rate + * unchanged if: + * a) lower rate unavailable + * b) success ratio at current rate > 85% (very good) + * c) current measured throughput is better than expected throughput + * of lower rate (under perfect 100% tx conditions, see table below) + * + * 5) Try increasing rate if, for current rate: + * a) success ratio is < 15% || + * b) both adjacent rates' throughputs are unmeasured (try it!) || + * b) higher adjacent rate has better measured throughput || + * c) lower adjacent rate has worse throughput, and higher is unmeasured + * + * As a sanity check, if increase was determined above, leave rate + * unchanged if: + * a) success ratio at current rate < 70%. This is not particularly + * good performance; higher rate is sure to have poorer success. + * + * 6) Re-evaluate the rate after each tx frame. If working with block- + * acknowledge, history and statistics may be calculated for the entire + * block (including prior history that fits within the history windows), + * before re-evaluation. + * + * FINDING BEST STARTING MODULATION MODE: + * + * After working with a modulation mode for a "while" (and doing rate scaling), + * the driver searches for a new initial mode in an attempt to improve + * throughput. The "while" is measured by numbers of attempted frames: + * + * For legacy mode, search for new mode after: + * 480 successful frames, or 160 failed frames + * For high-throughput modes (SISO or MIMO), search for new mode after: + * 4500 successful frames, or 400 failed frames + * + * Mode switch possibilities are (3 for each mode): + * + * For legacy: + * Change antenna, try SISO (if HT association), try MIMO (if HT association) + * For SISO: + * Change antenna, try MIMO, try shortened guard interval (SGI) + * For MIMO: + * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) + * + * When trying a new mode, use the same bit rate as the old/current mode when + * trying antenna switches and shortened guard interval. When switching to + * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate + * for which the expected throughput (under perfect conditions) is about the + * same or slightly better than the actual measured throughput delivered by + * the old/current mode. + * + * Actual throughput can be estimated by multiplying the expected throughput + * by the success ratio (successful / attempted tx frames). Frame size is + * not considered in this calculation; it assumes that frame size will average + * out to be fairly consistent over several samples. The following are + * metric values for expected throughput assuming 100% success ratio. + * Only G band has support for CCK rates: + * + * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 + * + * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 + * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 + * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 + * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 + * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 + * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 + * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 + * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 + * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 + * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 + * + * After the new mode has been tried for a short while (minimum of 6 failed + * frames or 8 successful frames), compare success ratio and actual throughput + * estimate of the new mode with the old. If either is better with the new + * mode, continue to use the new mode. + * + * Continue comparing modes until all 3 possibilities have been tried. + * If moving from legacy to HT, try all 3 possibilities from the new HT + * mode. After trying all 3, a best mode is found. Continue to use this mode + * for the longer "while" described above (e.g. 480 successful frames for + * legacy), and then repeat the search process. + * + */ +struct iwl_link_quality_cmd { + + /* Index of destination/recipient station in uCode's station table */ + u8 sta_id; + u8 reserved1; + __le16 control; /* not used */ + struct iwl_link_qual_general_params general_params; + struct iwl_link_qual_agg_params agg_params; + + /* + * Rate info; when using rate-scaling, Tx command's initial_rate_index + * specifies 1st Tx rate attempted, via index into this table. + * agn devices works its way through table when retrying Tx. + */ + struct { + __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */ + } rs_table[LINK_QUAL_MAX_RETRY_NUM]; + __le32 reserved2; +} __packed; + +/* + * BT configuration enable flags: + * bit 0 - 1: BT channel announcement enabled + * 0: disable + * bit 1 - 1: priority of BT device enabled + * 0: disable + * bit 2 - 1: BT 2 wire support enabled + * 0: disable + */ +#define BT_COEX_DISABLE (0x0) +#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0) +#define BT_ENABLE_PRIORITY BIT(1) +#define BT_ENABLE_2_WIRE BIT(2) + +#define BT_COEX_DISABLE (0x0) +#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY) + +#define BT_LEAD_TIME_MIN (0x0) +#define BT_LEAD_TIME_DEF (0x1E) +#define BT_LEAD_TIME_MAX (0xFF) + +#define BT_MAX_KILL_MIN (0x1) +#define BT_MAX_KILL_DEF (0x5) +#define BT_MAX_KILL_MAX (0xFF) + +#define BT_DURATION_LIMIT_DEF 625 +#define BT_DURATION_LIMIT_MAX 1250 +#define BT_DURATION_LIMIT_MIN 625 + +#define BT_ON_THRESHOLD_DEF 4 +#define BT_ON_THRESHOLD_MAX 1000 +#define BT_ON_THRESHOLD_MIN 1 + +#define BT_FRAG_THRESHOLD_DEF 0 +#define BT_FRAG_THRESHOLD_MAX 0 +#define BT_FRAG_THRESHOLD_MIN 0 + +#define BT_AGG_THRESHOLD_DEF 1200 +#define BT_AGG_THRESHOLD_MAX 8000 +#define BT_AGG_THRESHOLD_MIN 400 + +/* + * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) + * + * agn devices support hardware handshake with Bluetooth device on + * same platform. Bluetooth device alerts wireless device when it will Tx; + * wireless device can delay or kill its own Tx to accommodate. + */ +struct iwl_bt_cmd { + u8 flags; + u8 lead_time; + u8 max_kill; + u8 reserved; + __le32 kill_ack_mask; + __le32 kill_cts_mask; +} __packed; + +#define IWLAGN_BT_FLAG_CHANNEL_INHIBITION BIT(0) + +#define IWLAGN_BT_FLAG_COEX_MODE_MASK (BIT(3)|BIT(4)|BIT(5)) +#define IWLAGN_BT_FLAG_COEX_MODE_SHIFT 3 +#define IWLAGN_BT_FLAG_COEX_MODE_DISABLED 0 +#define IWLAGN_BT_FLAG_COEX_MODE_LEGACY_2W 1 +#define IWLAGN_BT_FLAG_COEX_MODE_3W 2 +#define IWLAGN_BT_FLAG_COEX_MODE_4W 3 + +#define IWLAGN_BT_FLAG_UCODE_DEFAULT BIT(6) +/* Disable Sync PSPoll on SCO/eSCO */ +#define IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE BIT(7) + +#define IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD -75 /* dBm */ +#define IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD -65 /* dBm */ + +#define IWLAGN_BT_PRIO_BOOST_MAX 0xFF +#define IWLAGN_BT_PRIO_BOOST_MIN 0x00 +#define IWLAGN_BT_PRIO_BOOST_DEFAULT 0xF0 +#define IWLAGN_BT_PRIO_BOOST_DEFAULT32 0xF0F0F0F0 + +#define IWLAGN_BT_MAX_KILL_DEFAULT 5 + +#define IWLAGN_BT3_T7_DEFAULT 1 + +enum iwl_bt_kill_idx { + IWL_BT_KILL_DEFAULT = 0, + IWL_BT_KILL_OVERRIDE = 1, + IWL_BT_KILL_REDUCE = 2, +}; + +#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT cpu_to_le32(0xffff0000) +#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT cpu_to_le32(0xffff0000) +#define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO cpu_to_le32(0xffffffff) +#define IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE cpu_to_le32(0) + +#define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT 2 + +#define IWLAGN_BT3_T2_DEFAULT 0xc + +#define IWLAGN_BT_VALID_ENABLE_FLAGS cpu_to_le16(BIT(0)) +#define IWLAGN_BT_VALID_BOOST cpu_to_le16(BIT(1)) +#define IWLAGN_BT_VALID_MAX_KILL cpu_to_le16(BIT(2)) +#define IWLAGN_BT_VALID_3W_TIMERS cpu_to_le16(BIT(3)) +#define IWLAGN_BT_VALID_KILL_ACK_MASK cpu_to_le16(BIT(4)) +#define IWLAGN_BT_VALID_KILL_CTS_MASK cpu_to_le16(BIT(5)) +#define IWLAGN_BT_VALID_REDUCED_TX_PWR cpu_to_le16(BIT(6)) +#define IWLAGN_BT_VALID_3W_LUT cpu_to_le16(BIT(7)) + +#define IWLAGN_BT_ALL_VALID_MSK (IWLAGN_BT_VALID_ENABLE_FLAGS | \ + IWLAGN_BT_VALID_BOOST | \ + IWLAGN_BT_VALID_MAX_KILL | \ + IWLAGN_BT_VALID_3W_TIMERS | \ + IWLAGN_BT_VALID_KILL_ACK_MASK | \ + IWLAGN_BT_VALID_KILL_CTS_MASK | \ + IWLAGN_BT_VALID_REDUCED_TX_PWR | \ + IWLAGN_BT_VALID_3W_LUT) + +#define IWLAGN_BT_REDUCED_TX_PWR BIT(0) + +#define IWLAGN_BT_DECISION_LUT_SIZE 12 + +struct iwl_basic_bt_cmd { + u8 flags; + u8 ledtime; /* unused */ + u8 max_kill; + u8 bt3_timer_t7_value; + __le32 kill_ack_mask; + __le32 kill_cts_mask; + u8 bt3_prio_sample_time; + u8 bt3_timer_t2_value; + __le16 bt4_reaction_time; /* unused */ + __le32 bt3_lookup_table[IWLAGN_BT_DECISION_LUT_SIZE]; + /* + * bit 0: use reduced tx power for control frame + * bit 1 - 7: reserved + */ + u8 reduce_txpower; + u8 reserved; + __le16 valid; +}; + +struct iwl_bt_cmd_v1 { + struct iwl_basic_bt_cmd basic; + u8 prio_boost; + /* + * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask + * if configure the following patterns + */ + u8 tx_prio_boost; /* SW boost of WiFi tx priority */ + __le16 rx_prio_boost; /* SW boost of WiFi rx priority */ +}; + +struct iwl_bt_cmd_v2 { + struct iwl_basic_bt_cmd basic; + __le32 prio_boost; + /* + * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask + * if configure the following patterns + */ + u8 reserved; + u8 tx_prio_boost; /* SW boost of WiFi tx priority */ + __le16 rx_prio_boost; /* SW boost of WiFi rx priority */ +}; + +#define IWLAGN_BT_SCO_ACTIVE cpu_to_le32(BIT(0)) + +struct iwlagn_bt_sco_cmd { + __le32 flags; +}; + +/****************************************************************************** + * (6) + * Spectrum Management (802.11h) Commands, Responses, Notifications: + * + *****************************************************************************/ + +/* + * Spectrum Management + */ +#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ + RXON_FILTER_CTL2HOST_MSK | \ + RXON_FILTER_ACCEPT_GRP_MSK | \ + RXON_FILTER_DIS_DECRYPT_MSK | \ + RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ + RXON_FILTER_ASSOC_MSK | \ + RXON_FILTER_BCON_AWARE_MSK) + +struct iwl_measure_channel { + __le32 duration; /* measurement duration in extended beacon + * format */ + u8 channel; /* channel to measure */ + u8 type; /* see enum iwl_measure_type */ + __le16 reserved; +} __packed; + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command) + */ +struct iwl_spectrum_cmd { + __le16 len; /* number of bytes starting from token */ + u8 token; /* token id */ + u8 id; /* measurement id -- 0 or 1 */ + u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ + u8 periodic; /* 1 = periodic */ + __le16 path_loss_timeout; + __le32 start_time; /* start time in extended beacon format */ + __le32 reserved2; + __le32 flags; /* rxon flags */ + __le32 filter_flags; /* rxon filter flags */ + __le16 channel_count; /* minimum 1, maximum 10 */ + __le16 reserved3; + struct iwl_measure_channel channels[10]; +} __packed; + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response) + */ +struct iwl_spectrum_resp { + u8 token; + u8 id; /* id of the prior command replaced, or 0xff */ + __le16 status; /* 0 - command will be handled + * 1 - cannot handle (conflicts with another + * measurement) */ +} __packed; + +enum iwl_measurement_state { + IWL_MEASUREMENT_START = 0, + IWL_MEASUREMENT_STOP = 1, +}; + +enum iwl_measurement_status { + IWL_MEASUREMENT_OK = 0, + IWL_MEASUREMENT_CONCURRENT = 1, + IWL_MEASUREMENT_CSA_CONFLICT = 2, + IWL_MEASUREMENT_TGH_CONFLICT = 3, + /* 4-5 reserved */ + IWL_MEASUREMENT_STOPPED = 6, + IWL_MEASUREMENT_TIMEOUT = 7, + IWL_MEASUREMENT_PERIODIC_FAILED = 8, +}; + +#define NUM_ELEMENTS_IN_HISTOGRAM 8 + +struct iwl_measurement_histogram { + __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ + __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ +} __packed; + +/* clear channel availability counters */ +struct iwl_measurement_cca_counters { + __le32 ofdm; + __le32 cck; +} __packed; + +enum iwl_measure_type { + IWL_MEASURE_BASIC = (1 << 0), + IWL_MEASURE_CHANNEL_LOAD = (1 << 1), + IWL_MEASURE_HISTOGRAM_RPI = (1 << 2), + IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3), + IWL_MEASURE_FRAME = (1 << 4), + /* bits 5:6 are reserved */ + IWL_MEASURE_IDLE = (1 << 7), +}; + +/* + * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command) + */ +struct iwl_spectrum_notification { + u8 id; /* measurement id -- 0 or 1 */ + u8 token; + u8 channel_index; /* index in measurement channel list */ + u8 state; /* 0 - start, 1 - stop */ + __le32 start_time; /* lower 32-bits of TSF */ + u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ + u8 channel; + u8 type; /* see enum iwl_measurement_type */ + u8 reserved1; + /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only + * valid if applicable for measurement type requested. */ + __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ + __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ + __le32 cca_time; /* channel load time in usecs */ + u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - + * unidentified */ + u8 reserved2[3]; + struct iwl_measurement_histogram histogram; + __le32 stop_time; /* lower 32-bits of TSF */ + __le32 status; /* see iwl_measurement_status */ +} __packed; + +/****************************************************************************** + * (7) + * Power Management Commands, Responses, Notifications: + * + *****************************************************************************/ + +/** + * struct iwl_powertable_cmd - Power Table Command + * @flags: See below: + * + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * PM allow: + * bit 0 - '0' Driver not allow power management + * '1' Driver allow PM (use rest of parameters) + * + * uCode send sleep notifications: + * bit 1 - '0' Don't send sleep notification + * '1' send sleep notification (SEND_PM_NOTIFICATION) + * + * Sleep over DTIM + * bit 2 - '0' PM have to walk up every DTIM + * '1' PM could sleep over DTIM till listen Interval. + * + * PCI power managed + * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) + * '1' !(PCI_CFG_LINK_CTRL & 0x1) + * + * Fast PD + * bit 4 - '1' Put radio to sleep when receiving frame for others + * + * Force sleep Modes + * bit 31/30- '00' use both mac/xtal sleeps + * '01' force Mac sleep + * '10' force xtal sleep + * '11' Illegal set + * + * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then + * ucode assume sleep over DTIM is allowed and we don't need to wake up + * for every DTIM. + */ +#define IWL_POWER_VEC_SIZE 5 + +#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0)) +#define IWL_POWER_POWER_SAVE_ENA_MSK cpu_to_le16(BIT(0)) +#define IWL_POWER_POWER_MANAGEMENT_ENA_MSK cpu_to_le16(BIT(1)) +#define IWL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2)) +#define IWL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3)) +#define IWL_POWER_FAST_PD cpu_to_le16(BIT(4)) +#define IWL_POWER_BEACON_FILTERING cpu_to_le16(BIT(5)) +#define IWL_POWER_SHADOW_REG_ENA cpu_to_le16(BIT(6)) +#define IWL_POWER_CT_KILL_SET cpu_to_le16(BIT(7)) +#define IWL_POWER_BT_SCO_ENA cpu_to_le16(BIT(8)) +#define IWL_POWER_ADVANCE_PM_ENA_MSK cpu_to_le16(BIT(9)) + +struct iwl_powertable_cmd { + __le16 flags; + u8 keep_alive_seconds; + u8 debug_flags; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 sleep_interval[IWL_POWER_VEC_SIZE]; + __le32 keep_alive_beacons; +} __packed; + +/* + * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command) + * all devices identical. + */ +struct iwl_sleep_notification { + u8 pm_sleep_mode; + u8 pm_wakeup_src; + __le16 reserved; + __le32 sleep_time; + __le32 tsf_low; + __le32 bcon_timer; +} __packed; + +/* Sleep states. all devices identical. */ +enum { + IWL_PM_NO_SLEEP = 0, + IWL_PM_SLP_MAC = 1, + IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, + IWL_PM_SLP_FULL_MAC_CARD_STATE = 3, + IWL_PM_SLP_PHY = 4, + IWL_PM_SLP_REPENT = 5, + IWL_PM_WAKEUP_BY_TIMER = 6, + IWL_PM_WAKEUP_BY_DRIVER = 7, + IWL_PM_WAKEUP_BY_RFKILL = 8, + /* 3 reserved */ + IWL_PM_NUM_OF_MODES = 12, +}; + +/* + * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response) + */ +#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */ +#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */ +#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */ +struct iwl_card_state_cmd { + __le32 status; /* CARD_STATE_CMD_* request new power state */ +} __packed; + +/* + * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command) + */ +struct iwl_card_state_notif { + __le32 flags; +} __packed; + +#define HW_CARD_DISABLED 0x01 +#define SW_CARD_DISABLED 0x02 +#define CT_CARD_DISABLED 0x04 +#define RXON_CARD_DISABLED 0x10 + +struct iwl_ct_kill_config { + __le32 reserved; + __le32 critical_temperature_M; + __le32 critical_temperature_R; +} __packed; + +/* 1000, and 6x00 */ +struct iwl_ct_kill_throttling_config { + __le32 critical_temperature_exit; + __le32 reserved; + __le32 critical_temperature_enter; +} __packed; + +/****************************************************************************** + * (8) + * Scan Commands, Responses, Notifications: + * + *****************************************************************************/ + +#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0) +#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1) + +/** + * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table + * + * One for each channel in the scan list. + * Each channel can independently select: + * 1) SSID for directed active scans + * 2) Txpower setting (for rate specified within Tx command) + * 3) How long to stay on-channel (behavior may be modified by quiet_time, + * quiet_plcp_th, good_CRC_th) + * + * To avoid uCode errors, make sure the following are true (see comments + * under struct iwl_scan_cmd about max_out_time and quiet_time): + * 1) If using passive_dwell (i.e. passive_dwell != 0): + * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) + * 2) quiet_time <= active_dwell + * 3) If restricting off-channel time (i.e. max_out_time !=0): + * passive_dwell < max_out_time + * active_dwell < max_out_time + */ + +struct iwl_scan_channel { + /* + * type is defined as: + * 0:0 1 = active, 0 = passive + * 1:20 SSID direct bit map; if a bit is set, then corresponding + * SSID IE is transmitted in probe request. + * 21:31 reserved + */ + __le32 type; + __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */ + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ + __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ + __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ +} __packed; + +/* set number of direct probes __le32 type */ +#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) + +/** + * struct iwl_ssid_ie - directed scan network information element + * + * Up to 20 of these may appear in REPLY_SCAN_CMD, + * selected by "type" bit field in struct iwl_scan_channel; + * each channel may select different ssids from among the 20 entries. + * SSID IEs get transmitted in reverse order of entry. + */ +struct iwl_ssid_ie { + u8 id; + u8 len; + u8 ssid[32]; +} __packed; + +#define PROBE_OPTION_MAX 20 +#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) +#define IWL_GOOD_CRC_TH_DISABLED 0 +#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) +#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff) +#define IWL_MAX_CMD_SIZE 4096 + +/* + * REPLY_SCAN_CMD = 0x80 (command) + * + * The hardware scan command is very powerful; the driver can set it up to + * maintain (relatively) normal network traffic while doing a scan in the + * background. The max_out_time and suspend_time control the ratio of how + * long the device stays on an associated network channel ("service channel") + * vs. how long it's away from the service channel, i.e. tuned to other channels + * for scanning. + * + * max_out_time is the max time off-channel (in usec), and suspend_time + * is how long (in "extended beacon" format) that the scan is "suspended" + * after returning to the service channel. That is, suspend_time is the + * time that we stay on the service channel, doing normal work, between + * scan segments. The driver may set these parameters differently to support + * scanning when associated vs. not associated, and light vs. heavy traffic + * loads when associated. + * + * After receiving this command, the device's scan engine does the following; + * + * 1) Sends SCAN_START notification to driver + * 2) Checks to see if it has time to do scan for one channel + * 3) Sends NULL packet, with power-save (PS) bit set to 1, + * to tell AP that we're going off-channel + * 4) Tunes to first channel in scan list, does active or passive scan + * 5) Sends SCAN_RESULT notification to driver + * 6) Checks to see if it has time to do scan on *next* channel in list + * 7) Repeats 4-6 until it no longer has time to scan the next channel + * before max_out_time expires + * 8) Returns to service channel + * 9) Sends NULL packet with PS=0 to tell AP that we're back + * 10) Stays on service channel until suspend_time expires + * 11) Repeats entire process 2-10 until list is complete + * 12) Sends SCAN_COMPLETE notification + * + * For fast, efficient scans, the scan command also has support for staying on + * a channel for just a short time, if doing active scanning and getting no + * responses to the transmitted probe request. This time is controlled by + * quiet_time, and the number of received packets below which a channel is + * considered "quiet" is controlled by quiet_plcp_threshold. + * + * For active scanning on channels that have regulatory restrictions against + * blindly transmitting, the scan can listen before transmitting, to make sure + * that there is already legitimate activity on the channel. If enough + * packets are cleanly received on the channel (controlled by good_CRC_th, + * typical value 1), the scan engine starts transmitting probe requests. + * + * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. + * + * To avoid uCode errors, see timing restrictions described under + * struct iwl_scan_channel. + */ + +enum iwl_scan_flags { + /* BIT(0) currently unused */ + IWL_SCAN_FLAGS_ACTION_FRAME_TX = BIT(1), + /* bits 2-7 reserved */ +}; + +struct iwl_scan_cmd { + __le16 len; + u8 scan_flags; /* scan flags: see enum iwl_scan_flags */ + u8 channel_count; /* # channels in channel list */ + __le16 quiet_time; /* dwell only this # millisecs on quiet channel + * (only for active scan) */ + __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ + __le16 good_CRC_th; /* passive -> active promotion threshold */ + __le16 rx_chain; /* RXON_RX_CHAIN_* */ + __le32 max_out_time; /* max usec to be away from associated (service) + * channel */ + __le32 suspend_time; /* pause scan this long (in "extended beacon + * format") when returning to service chnl: + */ + __le32 flags; /* RXON_FLG_* */ + __le32 filter_flags; /* RXON_FILTER_* */ + + /* For active scans (set to all-0s for passive scans). + * Does not include payload. Must specify Tx rate; no rate scaling. */ + struct iwl_tx_cmd tx_cmd; + + /* For directed active scans (set to all-0s otherwise) */ + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; + + /* + * Probe request frame, followed by channel list. + * + * Size of probe request frame is specified by byte count in tx_cmd. + * Channel list follows immediately after probe request frame. + * Number of channels in list is specified by channel_count. + * Each channel in list is of type: + * + * struct iwl_scan_channel channels[0]; + * + * NOTE: Only one band of channels can be scanned per pass. You + * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait + * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) + * before requesting another scan. + */ + u8 data[0]; +} __packed; + +/* Can abort will notify by complete notification with abort status. */ +#define CAN_ABORT_STATUS cpu_to_le32(0x1) +/* complete notification statuses */ +#define ABORT_STATUS 0x2 + +/* + * REPLY_SCAN_CMD = 0x80 (response) + */ +struct iwl_scanreq_notification { + __le32 status; /* 1: okay, 2: cannot fulfill request */ +} __packed; + +/* + * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) + */ +struct iwl_scanstart_notification { + __le32 tsf_low; + __le32 tsf_high; + __le32 beacon_timer; + u8 channel; + u8 band; + u8 reserved[2]; + __le32 status; +} __packed; + +#define SCAN_OWNER_STATUS 0x1 +#define MEASURE_OWNER_STATUS 0x2 + +#define IWL_PROBE_STATUS_OK 0 +#define IWL_PROBE_STATUS_TX_FAILED BIT(0) +/* error statuses combined with TX_FAILED */ +#define IWL_PROBE_STATUS_FAIL_TTL BIT(1) +#define IWL_PROBE_STATUS_FAIL_BT BIT(2) + +#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */ +/* + * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) + */ +struct iwl_scanresults_notification { + u8 channel; + u8 band; + u8 probe_status; + u8 num_probe_not_sent; /* not enough time to send */ + __le32 tsf_low; + __le32 tsf_high; + __le32 statistics[NUMBER_OF_STATISTICS]; +} __packed; + +/* + * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) + */ +struct iwl_scancomplete_notification { + u8 scanned_channels; + u8 status; + u8 bt_status; /* BT On/Off status */ + u8 last_channel; + __le32 tsf_low; + __le32 tsf_high; +} __packed; + + +/****************************************************************************** + * (9) + * IBSS/AP Commands and Notifications: + * + *****************************************************************************/ + +enum iwl_ibss_manager { + IWL_NOT_IBSS_MANAGER = 0, + IWL_IBSS_MANAGER = 1, +}; + +/* + * BEACON_NOTIFICATION = 0x90 (notification only, not a command) + */ + +struct iwlagn_beacon_notif { + struct iwlagn_tx_resp beacon_notify_hdr; + __le32 low_tsf; + __le32 high_tsf; + __le32 ibss_mgr_status; +} __packed; + +/* + * REPLY_TX_BEACON = 0x91 (command, has simple generic response) + */ + +struct iwl_tx_beacon_cmd { + struct iwl_tx_cmd tx; + __le16 tim_idx; + u8 tim_size; + u8 reserved1; + struct ieee80211_hdr frame[0]; /* beacon frame */ +} __packed; + +/****************************************************************************** + * (10) + * Statistics Commands and Notifications: + * + *****************************************************************************/ + +#define IWL_TEMP_CONVERT 260 + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/* Used for passing to driver number of successes and failures per rate */ +struct rate_histogram { + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } success; + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } failed; +} __packed; + +/* statistics command response */ + +struct statistics_dbg { + __le32 burst_check; + __le32 burst_count; + __le32 wait_for_silence_timeout_cnt; + __le32 reserved[3]; +} __packed; + +struct statistics_rx_phy { + __le32 ina_cnt; + __le32 fina_cnt; + __le32 plcp_err; + __le32 crc32_err; + __le32 overrun_err; + __le32 early_overrun_err; + __le32 crc32_good; + __le32 false_alarm_cnt; + __le32 fina_sync_err_cnt; + __le32 sfd_timeout; + __le32 fina_timeout; + __le32 unresponded_rts; + __le32 rxe_frame_limit_overrun; + __le32 sent_ack_cnt; + __le32 sent_cts_cnt; + __le32 sent_ba_rsp_cnt; + __le32 dsp_self_kill; + __le32 mh_format_err; + __le32 re_acq_main_rssi_sum; + __le32 reserved3; +} __packed; + +struct statistics_rx_ht_phy { + __le32 plcp_err; + __le32 overrun_err; + __le32 early_overrun_err; + __le32 crc32_good; + __le32 crc32_err; + __le32 mh_format_err; + __le32 agg_crc32_good; + __le32 agg_mpdu_cnt; + __le32 agg_cnt; + __le32 unsupport_mcs; +} __packed; + +#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1) + +struct statistics_rx_non_phy { + __le32 bogus_cts; /* CTS received when not expecting CTS */ + __le32 bogus_ack; /* ACK received when not expecting ACK */ + __le32 non_bssid_frames; /* number of frames with BSSID that + * doesn't belong to the STA BSSID */ + __le32 filtered_frames; /* count frames that were dumped in the + * filtering process */ + __le32 non_channel_beacons; /* beacons with our bss id but not on + * our serving channel */ + __le32 channel_beacons; /* beacons with our bss id and in our + * serving channel */ + __le32 num_missed_bcon; /* number of missed beacons */ + __le32 adc_rx_saturation_time; /* count in 0.8us units the time the + * ADC was in saturation */ + __le32 ina_detection_search_time;/* total time (in 0.8us) searched + * for INA */ + __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ + __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ + __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ + __le32 interference_data_flag; /* flag for interference data + * availability. 1 when data is + * available. */ + __le32 channel_load; /* counts RX Enable time in uSec */ + __le32 dsp_false_alarms; /* DSP false alarm (both OFDM + * and CCK) counter */ + __le32 beacon_rssi_a; + __le32 beacon_rssi_b; + __le32 beacon_rssi_c; + __le32 beacon_energy_a; + __le32 beacon_energy_b; + __le32 beacon_energy_c; +} __packed; + +struct statistics_rx_non_phy_bt { + struct statistics_rx_non_phy common; + /* additional stats for bt */ + __le32 num_bt_kills; + __le32 reserved[2]; +} __packed; + +struct statistics_rx { + struct statistics_rx_phy ofdm; + struct statistics_rx_phy cck; + struct statistics_rx_non_phy general; + struct statistics_rx_ht_phy ofdm_ht; +} __packed; + +struct statistics_rx_bt { + struct statistics_rx_phy ofdm; + struct statistics_rx_phy cck; + struct statistics_rx_non_phy_bt general; + struct statistics_rx_ht_phy ofdm_ht; +} __packed; + +/** + * struct statistics_tx_power - current tx power + * + * @ant_a: current tx power on chain a in 1/2 dB step + * @ant_b: current tx power on chain b in 1/2 dB step + * @ant_c: current tx power on chain c in 1/2 dB step + */ +struct statistics_tx_power { + u8 ant_a; + u8 ant_b; + u8 ant_c; + u8 reserved; +} __packed; + +struct statistics_tx_non_phy_agg { + __le32 ba_timeout; + __le32 ba_reschedule_frames; + __le32 scd_query_agg_frame_cnt; + __le32 scd_query_no_agg; + __le32 scd_query_agg; + __le32 scd_query_mismatch; + __le32 frame_not_ready; + __le32 underrun; + __le32 bt_prio_kill; + __le32 rx_ba_rsp_cnt; +} __packed; + +struct statistics_tx { + __le32 preamble_cnt; + __le32 rx_detected_cnt; + __le32 bt_prio_defer_cnt; + __le32 bt_prio_kill_cnt; + __le32 few_bytes_cnt; + __le32 cts_timeout; + __le32 ack_timeout; + __le32 expected_ack_cnt; + __le32 actual_ack_cnt; + __le32 dump_msdu_cnt; + __le32 burst_abort_next_frame_mismatch_cnt; + __le32 burst_abort_missing_next_frame_cnt; + __le32 cts_timeout_collision; + __le32 ack_or_ba_timeout_collision; + struct statistics_tx_non_phy_agg agg; + /* + * "tx_power" are optional parameters provided by uCode, + * 6000 series is the only device provide the information, + * Those are reserved fields for all the other devices + */ + struct statistics_tx_power tx_power; + __le32 reserved1; +} __packed; + + +struct statistics_div { + __le32 tx_on_a; + __le32 tx_on_b; + __le32 exec_time; + __le32 probe_time; + __le32 reserved1; + __le32 reserved2; +} __packed; + +struct statistics_general_common { + __le32 temperature; /* radio temperature */ + __le32 temperature_m; /* radio voltage */ + struct statistics_dbg dbg; + __le32 sleep_time; + __le32 slots_out; + __le32 slots_idle; + __le32 ttl_timestamp; + struct statistics_div div; + __le32 rx_enable_counter; + /* + * num_of_sos_states: + * count the number of times we have to re-tune + * in order to get out of bad PHY status + */ + __le32 num_of_sos_states; +} __packed; + +struct statistics_bt_activity { + /* Tx statistics */ + __le32 hi_priority_tx_req_cnt; + __le32 hi_priority_tx_denied_cnt; + __le32 lo_priority_tx_req_cnt; + __le32 lo_priority_tx_denied_cnt; + /* Rx statistics */ + __le32 hi_priority_rx_req_cnt; + __le32 hi_priority_rx_denied_cnt; + __le32 lo_priority_rx_req_cnt; + __le32 lo_priority_rx_denied_cnt; +} __packed; + +struct statistics_general { + struct statistics_general_common common; + __le32 reserved2; + __le32 reserved3; +} __packed; + +struct statistics_general_bt { + struct statistics_general_common common; + struct statistics_bt_activity activity; + __le32 reserved2; + __le32 reserved3; +} __packed; + +#define UCODE_STATISTICS_CLEAR_MSK (0x1 << 0) +#define UCODE_STATISTICS_FREQUENCY_MSK (0x1 << 1) +#define UCODE_STATISTICS_NARROW_BAND_MSK (0x1 << 2) + +/* + * REPLY_STATISTICS_CMD = 0x9c, + * all devices identical. + * + * This command triggers an immediate response containing uCode statistics. + * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below. + * + * If the CLEAR_STATS configuration flag is set, uCode will clear its + * internal copy of the statistics (counters) after issuing the response. + * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below). + * + * If the DISABLE_NOTIF configuration flag is set, uCode will not issue + * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag + * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself. + */ +#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */ +#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */ +struct iwl_statistics_cmd { + __le32 configuration_flags; /* IWL_STATS_CONF_* */ +} __packed; + +/* + * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) + * + * By default, uCode issues this notification after receiving a beacon + * while associated. To disable this behavior, set DISABLE_NOTIF flag in the + * REPLY_STATISTICS_CMD 0x9c, above. + * + * Statistics counters continue to increment beacon after beacon, but are + * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD + * 0x9c with CLEAR_STATS bit set (see above). + * + * uCode also issues this notification during scans. uCode clears statistics + * appropriately so that each notification contains statistics for only the + * one channel that has just been scanned. + */ +#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) +#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) + +struct iwl_notif_statistics { + __le32 flag; + struct statistics_rx rx; + struct statistics_tx tx; + struct statistics_general general; +} __packed; + +struct iwl_bt_notif_statistics { + __le32 flag; + struct statistics_rx_bt rx; + struct statistics_tx tx; + struct statistics_general_bt general; +} __packed; + +/* + * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) + * + * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed + * in regardless of how many missed beacons, which mean when driver receive the + * notification, inside the command, it can find all the beacons information + * which include number of total missed beacons, number of consecutive missed + * beacons, number of beacons received and number of beacons expected to + * receive. + * + * If uCode detected consecutive_missed_beacons > 5, it will reset the radio + * in order to bring the radio/PHY back to working state; which has no relation + * to when driver will perform sensitivity calibration. + * + * Driver should set it own missed_beacon_threshold to decide when to perform + * sensitivity calibration based on number of consecutive missed beacons in + * order to improve overall performance, especially in noisy environment. + * + */ + +#define IWL_MISSED_BEACON_THRESHOLD_MIN (1) +#define IWL_MISSED_BEACON_THRESHOLD_DEF (5) +#define IWL_MISSED_BEACON_THRESHOLD_MAX IWL_MISSED_BEACON_THRESHOLD_DEF + +struct iwl_missed_beacon_notif { + __le32 consecutive_missed_beacons; + __le32 total_missed_becons; + __le32 num_expected_beacons; + __le32 num_recvd_beacons; +} __packed; + + +/****************************************************************************** + * (11) + * Rx Calibration Commands: + * + * With the uCode used for open source drivers, most Tx calibration (except + * for Tx Power) and most Rx calibration is done by uCode during the + * "initialize" phase of uCode boot. Driver must calibrate only: + * + * 1) Tx power (depends on temperature), described elsewhere + * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) + * 3) Receiver sensitivity (to optimize signal detection) + * + *****************************************************************************/ + +/** + * SENSITIVITY_CMD = 0xa8 (command, has simple generic response) + * + * This command sets up the Rx signal detector for a sensitivity level that + * is high enough to lock onto all signals within the associated network, + * but low enough to ignore signals that are below a certain threshold, so as + * not to have too many "false alarms". False alarms are signals that the + * Rx DSP tries to lock onto, but then discards after determining that they + * are noise. + * + * The optimum number of false alarms is between 5 and 50 per 200 TUs + * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. + * time listening, not transmitting). Driver must adjust sensitivity so that + * the ratio of actual false alarms to actual Rx time falls within this range. + * + * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each + * received beacon. These provide information to the driver to analyze the + * sensitivity. Don't analyze statistics that come in from scanning, or any + * other non-associated-network source. Pertinent statistics include: + * + * From "general" statistics (struct statistics_rx_non_phy): + * + * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) + * Measure of energy of desired signal. Used for establishing a level + * below which the device does not detect signals. + * + * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) + * Measure of background noise in silent period after beacon. + * + * channel_load + * uSecs of actual Rx time during beacon period (varies according to + * how much time was spent transmitting). + * + * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately: + * + * false_alarm_cnt + * Signal locks abandoned early (before phy-level header). + * + * plcp_err + * Signal locks abandoned late (during phy-level header). + * + * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from + * beacon to beacon, i.e. each value is an accumulation of all errors + * before and including the latest beacon. Values will wrap around to 0 + * after counting up to 2^32 - 1. Driver must differentiate vs. + * previous beacon's values to determine # false alarms in the current + * beacon period. + * + * Total number of false alarms = false_alarms + plcp_errs + * + * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd + * (notice that the start points for OFDM are at or close to settings for + * maximum sensitivity): + * + * START / MIN / MAX + * HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120 + * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210 + * HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140 + * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270 + * + * If actual rate of OFDM false alarms (+ plcp_errors) is too high + * (greater than 50 for each 204.8 msecs listening), reduce sensitivity + * by *adding* 1 to all 4 of the table entries above, up to the max for + * each entry. Conversely, if false alarm rate is too low (less than 5 + * for each 204.8 msecs listening), *subtract* 1 from each entry to + * increase sensitivity. + * + * For CCK sensitivity, keep track of the following: + * + * 1). 20-beacon history of maximum background noise, indicated by + * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the + * 3 receivers. For any given beacon, the "silence reference" is + * the maximum of last 60 samples (20 beacons * 3 receivers). + * + * 2). 10-beacon history of strongest signal level, as indicated + * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, + * i.e. the strength of the signal through the best receiver at the + * moment. These measurements are "upside down", with lower values + * for stronger signals, so max energy will be *minimum* value. + * + * Then for any given beacon, the driver must determine the *weakest* + * of the strongest signals; this is the minimum level that needs to be + * successfully detected, when using the best receiver at the moment. + * "Max cck energy" is the maximum (higher value means lower energy!) + * of the last 10 minima. Once this is determined, driver must add + * a little margin by adding "6" to it. + * + * 3). Number of consecutive beacon periods with too few false alarms. + * Reset this to 0 at the first beacon period that falls within the + * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). + * + * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd + * (notice that the start points for CCK are at maximum sensitivity): + * + * START / MIN / MAX + * HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200 + * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400 + * HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100 + * + * If actual rate of CCK false alarms (+ plcp_errors) is too high + * (greater than 50 for each 204.8 msecs listening), method for reducing + * sensitivity is: + * + * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, + * up to max 400. + * + * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160, + * sensitivity has been reduced a significant amount; bring it up to + * a moderate 161. Otherwise, *add* 3, up to max 200. + * + * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160, + * sensitivity has been reduced only a moderate or small amount; + * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX, + * down to min 0. Otherwise (if gain has been significantly reduced), + * don't change the HD_MIN_ENERGY_CCK_DET_INDEX value. + * + * b) Save a snapshot of the "silence reference". + * + * If actual rate of CCK false alarms (+ plcp_errors) is too low + * (less than 5 for each 204.8 msecs listening), method for increasing + * sensitivity is used only if: + * + * 1a) Previous beacon did not have too many false alarms + * 1b) AND difference between previous "silence reference" and current + * "silence reference" (prev - current) is 2 or more, + * OR 2) 100 or more consecutive beacon periods have had rate of + * less than 5 false alarms per 204.8 milliseconds rx time. + * + * Method for increasing sensitivity: + * + * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX, + * down to min 125. + * + * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, + * down to min 200. + * + * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100. + * + * If actual rate of CCK false alarms (+ plcp_errors) is within good range + * (between 5 and 50 for each 204.8 msecs listening): + * + * 1) Save a snapshot of the silence reference. + * + * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), + * give some extra margin to energy threshold by *subtracting* 8 + * from value in HD_MIN_ENERGY_CCK_DET_INDEX. + * + * For all cases (too few, too many, good range), make sure that the CCK + * detection threshold (energy) is below the energy level for robust + * detection over the past 10 beacon periods, the "Max cck energy". + * Lower values mean higher energy; this means making sure that the value + * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy". + * + */ + +/* + * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd) + */ +#define HD_TABLE_SIZE (11) /* number of entries */ +#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */ +#define HD_MIN_ENERGY_OFDM_DET_INDEX (1) +#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2) +#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3) +#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4) +#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5) +#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6) +#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7) +#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8) +#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9) +#define HD_OFDM_ENERGY_TH_IN_INDEX (10) + +/* + * Additional table entries in enhance SENSITIVITY_CMD + */ +#define HD_INA_NON_SQUARE_DET_OFDM_INDEX (11) +#define HD_INA_NON_SQUARE_DET_CCK_INDEX (12) +#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX (13) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX (14) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (15) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX (16) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX (17) +#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX (18) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (19) +#define HD_CCK_NON_SQUARE_DET_SLOPE_INDEX (20) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX (21) +#define HD_RESERVED (22) + +/* number of entries for enhanced tbl */ +#define ENHANCE_HD_TABLE_SIZE (23) + +/* number of additional entries for enhanced tbl */ +#define ENHANCE_HD_TABLE_ENTRIES (ENHANCE_HD_TABLE_SIZE - HD_TABLE_SIZE) + +#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V1 cpu_to_le16(0) +#define HD_INA_NON_SQUARE_DET_CCK_DATA_V1 cpu_to_le16(0) +#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1 cpu_to_le16(0) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(668) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(486) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(37) +#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(853) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4) +#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(476) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(99) + +#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V2 cpu_to_le16(1) +#define HD_INA_NON_SQUARE_DET_CCK_DATA_V2 cpu_to_le16(1) +#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2 cpu_to_le16(1) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(600) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(40) +#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(486) +#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(45) +#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(853) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(60) +#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(476) +#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(99) + + +/* Control field in struct iwl_sensitivity_cmd */ +#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0) +#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1) + +/** + * struct iwl_sensitivity_cmd + * @control: (1) updates working table, (0) updates default table + * @table: energy threshold values, use HD_* as index into table + * + * Always use "1" in "control" to update uCode's working table and DSP. + */ +struct iwl_sensitivity_cmd { + __le16 control; /* always use "1" */ + __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */ +} __packed; + +/* + * + */ +struct iwl_enhance_sensitivity_cmd { + __le16 control; /* always use "1" */ + __le16 enhance_table[ENHANCE_HD_TABLE_SIZE]; /* use HD_* as index */ +} __packed; + + +/** + * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response) + * + * This command sets the relative gains of agn device's 3 radio receiver chains. + * + * After the first association, driver should accumulate signal and noise + * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20 + * beacons from the associated network (don't collect statistics that come + * in from scanning, or any other non-network source). + * + * DISCONNECTED ANTENNA: + * + * Driver should determine which antennas are actually connected, by comparing + * average beacon signal levels for the 3 Rx chains. Accumulate (add) the + * following values over 20 beacons, one accumulator for each of the chains + * a/b/c, from struct statistics_rx_non_phy: + * + * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) + * + * Find the strongest signal from among a/b/c. Compare the other two to the + * strongest. If any signal is more than 15 dB (times 20, unless you + * divide the accumulated values by 20) below the strongest, the driver + * considers that antenna to be disconnected, and should not try to use that + * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, + * driver should declare the stronger one as connected, and attempt to use it + * (A and B are the only 2 Tx chains!). + * + * + * RX BALANCE: + * + * Driver should balance the 3 receivers (but just the ones that are connected + * to antennas, see above) for gain, by comparing the average signal levels + * detected during the silence after each beacon (background noise). + * Accumulate (add) the following values over 20 beacons, one accumulator for + * each of the chains a/b/c, from struct statistics_rx_non_phy: + * + * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) + * + * Find the weakest background noise level from among a/b/c. This Rx chain + * will be the reference, with 0 gain adjustment. Attenuate other channels by + * finding noise difference: + * + * (accum_noise[i] - accum_noise[reference]) / 30 + * + * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. + * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the + * driver should limit the difference results to a range of 0-3 (0-4.5 dB), + * and set bit 2 to indicate "reduce gain". The value for the reference + * (weakest) chain should be "0". + * + * diff_gain_[abc] bit fields: + * 2: (1) reduce gain, (0) increase gain + * 1-0: amount of gain, units of 1.5 dB + */ + +/* Phy calibration command for series */ +enum { + IWL_PHY_CALIBRATE_DC_CMD = 8, + IWL_PHY_CALIBRATE_LO_CMD = 9, + IWL_PHY_CALIBRATE_TX_IQ_CMD = 11, + IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, + IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16, + IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17, + IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD = 18, +}; + +/* This enum defines the bitmap of various calibrations to enable in both + * init ucode and runtime ucode through CALIBRATION_CFG_CMD. + */ +enum iwl_ucode_calib_cfg { + IWL_CALIB_CFG_RX_BB_IDX = BIT(0), + IWL_CALIB_CFG_DC_IDX = BIT(1), + IWL_CALIB_CFG_LO_IDX = BIT(2), + IWL_CALIB_CFG_TX_IQ_IDX = BIT(3), + IWL_CALIB_CFG_RX_IQ_IDX = BIT(4), + IWL_CALIB_CFG_NOISE_IDX = BIT(5), + IWL_CALIB_CFG_CRYSTAL_IDX = BIT(6), + IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(7), + IWL_CALIB_CFG_PAPD_IDX = BIT(8), + IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(9), + IWL_CALIB_CFG_TX_PWR_IDX = BIT(10), +}; + +#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \ + IWL_CALIB_CFG_DC_IDX | \ + IWL_CALIB_CFG_LO_IDX | \ + IWL_CALIB_CFG_TX_IQ_IDX | \ + IWL_CALIB_CFG_RX_IQ_IDX | \ + IWL_CALIB_CFG_CRYSTAL_IDX) + +#define IWL_CALIB_RT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \ + IWL_CALIB_CFG_DC_IDX | \ + IWL_CALIB_CFG_LO_IDX | \ + IWL_CALIB_CFG_TX_IQ_IDX | \ + IWL_CALIB_CFG_RX_IQ_IDX | \ + IWL_CALIB_CFG_TEMPERATURE_IDX | \ + IWL_CALIB_CFG_PAPD_IDX | \ + IWL_CALIB_CFG_TX_PWR_IDX | \ + IWL_CALIB_CFG_CRYSTAL_IDX) + +#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK cpu_to_le32(BIT(0)) + +struct iwl_calib_cfg_elmnt_s { + __le32 is_enable; + __le32 start; + __le32 send_res; + __le32 apply_res; + __le32 reserved; +} __packed; + +struct iwl_calib_cfg_status_s { + struct iwl_calib_cfg_elmnt_s once; + struct iwl_calib_cfg_elmnt_s perd; + __le32 flags; +} __packed; + +struct iwl_calib_cfg_cmd { + struct iwl_calib_cfg_status_s ucd_calib_cfg; + struct iwl_calib_cfg_status_s drv_calib_cfg; + __le32 reserved1; +} __packed; + +struct iwl_calib_hdr { + u8 op_code; + u8 first_group; + u8 groups_num; + u8 data_valid; +} __packed; + +struct iwl_calib_cmd { + struct iwl_calib_hdr hdr; + u8 data[0]; +} __packed; + +struct iwl_calib_xtal_freq_cmd { + struct iwl_calib_hdr hdr; + u8 cap_pin1; + u8 cap_pin2; + u8 pad[2]; +} __packed; + +#define DEFAULT_RADIO_SENSOR_OFFSET cpu_to_le16(2700) +struct iwl_calib_temperature_offset_cmd { + struct iwl_calib_hdr hdr; + __le16 radio_sensor_offset; + __le16 reserved; +} __packed; + +struct iwl_calib_temperature_offset_v2_cmd { + struct iwl_calib_hdr hdr; + __le16 radio_sensor_offset_high; + __le16 radio_sensor_offset_low; + __le16 burntVoltageRef; + __le16 reserved; +} __packed; + +/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */ +struct iwl_calib_chain_noise_reset_cmd { + struct iwl_calib_hdr hdr; + u8 data[0]; +}; + +/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */ +struct iwl_calib_chain_noise_gain_cmd { + struct iwl_calib_hdr hdr; + u8 delta_gain_1; + u8 delta_gain_2; + u8 pad[2]; +} __packed; + +/****************************************************************************** + * (12) + * Miscellaneous Commands: + * + *****************************************************************************/ + +/* + * LEDs Command & Response + * REPLY_LEDS_CMD = 0x48 (command, has simple generic response) + * + * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), + * this command turns it on or off, or sets up a periodic blinking cycle. + */ +struct iwl_led_cmd { + __le32 interval; /* "interval" in uSec */ + u8 id; /* 1: Activity, 2: Link, 3: Tech */ + u8 off; /* # intervals off while blinking; + * "0", with >0 "on" value, turns LED on */ + u8 on; /* # intervals on while blinking; + * "0", regardless of "off", turns LED off */ + u8 reserved; +} __packed; + +/* + * station priority table entries + * also used as potential "events" value for both + * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD + */ + +/* + * COEX events entry flag masks + * RP - Requested Priority + * WP - Win Medium Priority: priority assigned when the contention has been won + */ +#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG (0x1) +#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG (0x2) +#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG (0x4) + +#define COEX_CU_UNASSOC_IDLE_RP 4 +#define COEX_CU_UNASSOC_MANUAL_SCAN_RP 4 +#define COEX_CU_UNASSOC_AUTO_SCAN_RP 4 +#define COEX_CU_CALIBRATION_RP 4 +#define COEX_CU_PERIODIC_CALIBRATION_RP 4 +#define COEX_CU_CONNECTION_ESTAB_RP 4 +#define COEX_CU_ASSOCIATED_IDLE_RP 4 +#define COEX_CU_ASSOC_MANUAL_SCAN_RP 4 +#define COEX_CU_ASSOC_AUTO_SCAN_RP 4 +#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP 4 +#define COEX_CU_RF_ON_RP 6 +#define COEX_CU_RF_OFF_RP 4 +#define COEX_CU_STAND_ALONE_DEBUG_RP 6 +#define COEX_CU_IPAN_ASSOC_LEVEL_RP 4 +#define COEX_CU_RSRVD1_RP 4 +#define COEX_CU_RSRVD2_RP 4 + +#define COEX_CU_UNASSOC_IDLE_WP 3 +#define COEX_CU_UNASSOC_MANUAL_SCAN_WP 3 +#define COEX_CU_UNASSOC_AUTO_SCAN_WP 3 +#define COEX_CU_CALIBRATION_WP 3 +#define COEX_CU_PERIODIC_CALIBRATION_WP 3 +#define COEX_CU_CONNECTION_ESTAB_WP 3 +#define COEX_CU_ASSOCIATED_IDLE_WP 3 +#define COEX_CU_ASSOC_MANUAL_SCAN_WP 3 +#define COEX_CU_ASSOC_AUTO_SCAN_WP 3 +#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP 3 +#define COEX_CU_RF_ON_WP 3 +#define COEX_CU_RF_OFF_WP 3 +#define COEX_CU_STAND_ALONE_DEBUG_WP 6 +#define COEX_CU_IPAN_ASSOC_LEVEL_WP 3 +#define COEX_CU_RSRVD1_WP 3 +#define COEX_CU_RSRVD2_WP 3 + +#define COEX_UNASSOC_IDLE_FLAGS 0 +#define COEX_UNASSOC_MANUAL_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_UNASSOC_AUTO_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_CALIBRATION_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_PERIODIC_CALIBRATION_FLAGS 0 +/* + * COEX_CONNECTION_ESTAB: + * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. + */ +#define COEX_CONNECTION_ESTAB_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) +#define COEX_ASSOCIATED_IDLE_FLAGS 0 +#define COEX_ASSOC_MANUAL_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_ASSOC_AUTO_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS 0 +#define COEX_RF_ON_FLAGS 0 +#define COEX_RF_OFF_FLAGS 0 +#define COEX_STAND_ALONE_DEBUG_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_IPAN_ASSOC_LEVEL_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) +#define COEX_RSRVD1_FLAGS 0 +#define COEX_RSRVD2_FLAGS 0 +/* + * COEX_CU_RF_ON is the event wrapping all radio ownership. + * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. + */ +#define COEX_CU_RF_ON_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) + + +enum { + /* un-association part */ + COEX_UNASSOC_IDLE = 0, + COEX_UNASSOC_MANUAL_SCAN = 1, + COEX_UNASSOC_AUTO_SCAN = 2, + /* calibration */ + COEX_CALIBRATION = 3, + COEX_PERIODIC_CALIBRATION = 4, + /* connection */ + COEX_CONNECTION_ESTAB = 5, + /* association part */ + COEX_ASSOCIATED_IDLE = 6, + COEX_ASSOC_MANUAL_SCAN = 7, + COEX_ASSOC_AUTO_SCAN = 8, + COEX_ASSOC_ACTIVE_LEVEL = 9, + /* RF ON/OFF */ + COEX_RF_ON = 10, + COEX_RF_OFF = 11, + COEX_STAND_ALONE_DEBUG = 12, + /* IPAN */ + COEX_IPAN_ASSOC_LEVEL = 13, + /* reserved */ + COEX_RSRVD1 = 14, + COEX_RSRVD2 = 15, + COEX_NUM_OF_EVENTS = 16 +}; + +/* + * Coexistence WIFI/WIMAX Command + * COEX_PRIORITY_TABLE_CMD = 0x5a + * + */ +struct iwl_wimax_coex_event_entry { + u8 request_prio; + u8 win_medium_prio; + u8 reserved; + u8 flags; +} __packed; + +/* COEX flag masks */ + +/* Station table is valid */ +#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1) +/* UnMask wake up src at unassociated sleep */ +#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4) +/* UnMask wake up src at associated sleep */ +#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8) +/* Enable CoEx feature. */ +#define COEX_FLAGS_COEX_ENABLE_MSK (0x80) + +struct iwl_wimax_coex_cmd { + u8 flags; + u8 reserved[3]; + struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS]; +} __packed; + +/* + * Coexistence MEDIUM NOTIFICATION + * COEX_MEDIUM_NOTIFICATION = 0x5b + * + * notification from uCode to host to indicate medium changes + * + */ +/* + * status field + * bit 0 - 2: medium status + * bit 3: medium change indication + * bit 4 - 31: reserved + */ +/* status option values, (0 - 2 bits) */ +#define COEX_MEDIUM_BUSY (0x0) /* radio belongs to WiMAX */ +#define COEX_MEDIUM_ACTIVE (0x1) /* radio belongs to WiFi */ +#define COEX_MEDIUM_PRE_RELEASE (0x2) /* received radio release */ +#define COEX_MEDIUM_MSK (0x7) + +/* send notification status (1 bit) */ +#define COEX_MEDIUM_CHANGED (0x8) +#define COEX_MEDIUM_CHANGED_MSK (0x8) +#define COEX_MEDIUM_SHIFT (3) + +struct iwl_coex_medium_notification { + __le32 status; + __le32 events; +} __packed; + +/* + * Coexistence EVENT Command + * COEX_EVENT_CMD = 0x5c + * + * send from host to uCode for coex event request. + */ +/* flags options */ +#define COEX_EVENT_REQUEST_MSK (0x1) + +struct iwl_coex_event_cmd { + u8 flags; + u8 event; + __le16 reserved; +} __packed; + +struct iwl_coex_event_resp { + __le32 status; +} __packed; + + +/****************************************************************************** + * Bluetooth Coexistence commands + * + *****************************************************************************/ + +/* + * BT Status notification + * REPLY_BT_COEX_PROFILE_NOTIF = 0xce + */ +enum iwl_bt_coex_profile_traffic_load { + IWL_BT_COEX_TRAFFIC_LOAD_NONE = 0, + IWL_BT_COEX_TRAFFIC_LOAD_LOW = 1, + IWL_BT_COEX_TRAFFIC_LOAD_HIGH = 2, + IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS = 3, +/* + * There are no more even though below is a u8, the + * indication from the BT device only has two bits. + */ +}; + +#define BT_SESSION_ACTIVITY_1_UART_MSG 0x1 +#define BT_SESSION_ACTIVITY_2_UART_MSG 0x2 + +/* BT UART message - Share Part (BT -> WiFi) */ +#define BT_UART_MSG_FRAME1MSGTYPE_POS (0) +#define BT_UART_MSG_FRAME1MSGTYPE_MSK \ + (0x7 << BT_UART_MSG_FRAME1MSGTYPE_POS) +#define BT_UART_MSG_FRAME1SSN_POS (3) +#define BT_UART_MSG_FRAME1SSN_MSK \ + (0x3 << BT_UART_MSG_FRAME1SSN_POS) +#define BT_UART_MSG_FRAME1UPDATEREQ_POS (5) +#define BT_UART_MSG_FRAME1UPDATEREQ_MSK \ + (0x1 << BT_UART_MSG_FRAME1UPDATEREQ_POS) +#define BT_UART_MSG_FRAME1RESERVED_POS (6) +#define BT_UART_MSG_FRAME1RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME1RESERVED_POS) + +#define BT_UART_MSG_FRAME2OPENCONNECTIONS_POS (0) +#define BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK \ + (0x3 << BT_UART_MSG_FRAME2OPENCONNECTIONS_POS) +#define BT_UART_MSG_FRAME2TRAFFICLOAD_POS (2) +#define BT_UART_MSG_FRAME2TRAFFICLOAD_MSK \ + (0x3 << BT_UART_MSG_FRAME2TRAFFICLOAD_POS) +#define BT_UART_MSG_FRAME2CHLSEQN_POS (4) +#define BT_UART_MSG_FRAME2CHLSEQN_MSK \ + (0x1 << BT_UART_MSG_FRAME2CHLSEQN_POS) +#define BT_UART_MSG_FRAME2INBAND_POS (5) +#define BT_UART_MSG_FRAME2INBAND_MSK \ + (0x1 << BT_UART_MSG_FRAME2INBAND_POS) +#define BT_UART_MSG_FRAME2RESERVED_POS (6) +#define BT_UART_MSG_FRAME2RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME2RESERVED_POS) + +#define BT_UART_MSG_FRAME3SCOESCO_POS (0) +#define BT_UART_MSG_FRAME3SCOESCO_MSK \ + (0x1 << BT_UART_MSG_FRAME3SCOESCO_POS) +#define BT_UART_MSG_FRAME3SNIFF_POS (1) +#define BT_UART_MSG_FRAME3SNIFF_MSK \ + (0x1 << BT_UART_MSG_FRAME3SNIFF_POS) +#define BT_UART_MSG_FRAME3A2DP_POS (2) +#define BT_UART_MSG_FRAME3A2DP_MSK \ + (0x1 << BT_UART_MSG_FRAME3A2DP_POS) +#define BT_UART_MSG_FRAME3ACL_POS (3) +#define BT_UART_MSG_FRAME3ACL_MSK \ + (0x1 << BT_UART_MSG_FRAME3ACL_POS) +#define BT_UART_MSG_FRAME3MASTER_POS (4) +#define BT_UART_MSG_FRAME3MASTER_MSK \ + (0x1 << BT_UART_MSG_FRAME3MASTER_POS) +#define BT_UART_MSG_FRAME3OBEX_POS (5) +#define BT_UART_MSG_FRAME3OBEX_MSK \ + (0x1 << BT_UART_MSG_FRAME3OBEX_POS) +#define BT_UART_MSG_FRAME3RESERVED_POS (6) +#define BT_UART_MSG_FRAME3RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME3RESERVED_POS) + +#define BT_UART_MSG_FRAME4IDLEDURATION_POS (0) +#define BT_UART_MSG_FRAME4IDLEDURATION_MSK \ + (0x3F << BT_UART_MSG_FRAME4IDLEDURATION_POS) +#define BT_UART_MSG_FRAME4RESERVED_POS (6) +#define BT_UART_MSG_FRAME4RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME4RESERVED_POS) + +#define BT_UART_MSG_FRAME5TXACTIVITY_POS (0) +#define BT_UART_MSG_FRAME5TXACTIVITY_MSK \ + (0x3 << BT_UART_MSG_FRAME5TXACTIVITY_POS) +#define BT_UART_MSG_FRAME5RXACTIVITY_POS (2) +#define BT_UART_MSG_FRAME5RXACTIVITY_MSK \ + (0x3 << BT_UART_MSG_FRAME5RXACTIVITY_POS) +#define BT_UART_MSG_FRAME5ESCORETRANSMIT_POS (4) +#define BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK \ + (0x3 << BT_UART_MSG_FRAME5ESCORETRANSMIT_POS) +#define BT_UART_MSG_FRAME5RESERVED_POS (6) +#define BT_UART_MSG_FRAME5RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME5RESERVED_POS) + +#define BT_UART_MSG_FRAME6SNIFFINTERVAL_POS (0) +#define BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK \ + (0x1F << BT_UART_MSG_FRAME6SNIFFINTERVAL_POS) +#define BT_UART_MSG_FRAME6DISCOVERABLE_POS (5) +#define BT_UART_MSG_FRAME6DISCOVERABLE_MSK \ + (0x1 << BT_UART_MSG_FRAME6DISCOVERABLE_POS) +#define BT_UART_MSG_FRAME6RESERVED_POS (6) +#define BT_UART_MSG_FRAME6RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME6RESERVED_POS) + +#define BT_UART_MSG_FRAME7SNIFFACTIVITY_POS (0) +#define BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK \ + (0x7 << BT_UART_MSG_FRAME7SNIFFACTIVITY_POS) +#define BT_UART_MSG_FRAME7PAGE_POS (3) +#define BT_UART_MSG_FRAME7PAGE_MSK \ + (0x1 << BT_UART_MSG_FRAME7PAGE_POS) +#define BT_UART_MSG_FRAME7INQUIRY_POS (4) +#define BT_UART_MSG_FRAME7INQUIRY_MSK \ + (0x1 << BT_UART_MSG_FRAME7INQUIRY_POS) +#define BT_UART_MSG_FRAME7CONNECTABLE_POS (5) +#define BT_UART_MSG_FRAME7CONNECTABLE_MSK \ + (0x1 << BT_UART_MSG_FRAME7CONNECTABLE_POS) +#define BT_UART_MSG_FRAME7RESERVED_POS (6) +#define BT_UART_MSG_FRAME7RESERVED_MSK \ + (0x3 << BT_UART_MSG_FRAME7RESERVED_POS) + +/* BT Session Activity 2 UART message (BT -> WiFi) */ +#define BT_UART_MSG_2_FRAME1RESERVED1_POS (5) +#define BT_UART_MSG_2_FRAME1RESERVED1_MSK \ + (0x1<<BT_UART_MSG_2_FRAME1RESERVED1_POS) +#define BT_UART_MSG_2_FRAME1RESERVED2_POS (6) +#define BT_UART_MSG_2_FRAME1RESERVED2_MSK \ + (0x3<<BT_UART_MSG_2_FRAME1RESERVED2_POS) + +#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS (0) +#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_MSK \ + (0x3F<<BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS) +#define BT_UART_MSG_2_FRAME2RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME2RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME2RESERVED_POS) + +#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS (0) +#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_MSK \ + (0xF<<BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS) +#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS (4) +#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_MSK \ + (0x1<<BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS) +#define BT_UART_MSG_2_FRAME3LEMASTER_POS (5) +#define BT_UART_MSG_2_FRAME3LEMASTER_MSK \ + (0x1<<BT_UART_MSG_2_FRAME3LEMASTER_POS) +#define BT_UART_MSG_2_FRAME3RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME3RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME3RESERVED_POS) + +#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS (0) +#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_MSK \ + (0xF<<BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS) +#define BT_UART_MSG_2_FRAME4NUMLECONN_POS (4) +#define BT_UART_MSG_2_FRAME4NUMLECONN_MSK \ + (0x3<<BT_UART_MSG_2_FRAME4NUMLECONN_POS) +#define BT_UART_MSG_2_FRAME4RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME4RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME4RESERVED_POS) + +#define BT_UART_MSG_2_FRAME5BTMINRSSI_POS (0) +#define BT_UART_MSG_2_FRAME5BTMINRSSI_MSK \ + (0xF<<BT_UART_MSG_2_FRAME5BTMINRSSI_POS) +#define BT_UART_MSG_2_FRAME5LESCANINITMODE_POS (4) +#define BT_UART_MSG_2_FRAME5LESCANINITMODE_MSK \ + (0x1<<BT_UART_MSG_2_FRAME5LESCANINITMODE_POS) +#define BT_UART_MSG_2_FRAME5LEADVERMODE_POS (5) +#define BT_UART_MSG_2_FRAME5LEADVERMODE_MSK \ + (0x1<<BT_UART_MSG_2_FRAME5LEADVERMODE_POS) +#define BT_UART_MSG_2_FRAME5RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME5RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME5RESERVED_POS) + +#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS (0) +#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_MSK \ + (0x1F<<BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS) +#define BT_UART_MSG_2_FRAME6RFU_POS (5) +#define BT_UART_MSG_2_FRAME6RFU_MSK \ + (0x1<<BT_UART_MSG_2_FRAME6RFU_POS) +#define BT_UART_MSG_2_FRAME6RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME6RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME6RESERVED_POS) + +#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS (0) +#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_MSK \ + (0x7<<BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS) +#define BT_UART_MSG_2_FRAME7LEPROFILE1_POS (3) +#define BT_UART_MSG_2_FRAME7LEPROFILE1_MSK \ + (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE1_POS) +#define BT_UART_MSG_2_FRAME7LEPROFILE2_POS (4) +#define BT_UART_MSG_2_FRAME7LEPROFILE2_MSK \ + (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE2_POS) +#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS (5) +#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_MSK \ + (0x1<<BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS) +#define BT_UART_MSG_2_FRAME7RESERVED_POS (6) +#define BT_UART_MSG_2_FRAME7RESERVED_MSK \ + (0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS) + + +#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD (-62) +#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD (-65) + +struct iwl_bt_uart_msg { + u8 header; + u8 frame1; + u8 frame2; + u8 frame3; + u8 frame4; + u8 frame5; + u8 frame6; + u8 frame7; +} __attribute__((packed)); + +struct iwl_bt_coex_profile_notif { + struct iwl_bt_uart_msg last_bt_uart_msg; + u8 bt_status; /* 0 - off, 1 - on */ + u8 bt_traffic_load; /* 0 .. 3? */ + u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */ + u8 reserved; +} __attribute__((packed)); + +#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS 0 +#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK 0x1 +#define IWL_BT_COEX_PRIO_TBL_PRIO_POS 1 +#define IWL_BT_COEX_PRIO_TBL_PRIO_MASK 0x0e +#define IWL_BT_COEX_PRIO_TBL_RESERVED_POS 4 +#define IWL_BT_COEX_PRIO_TBL_RESERVED_MASK 0xf0 +#define IWL_BT_COEX_PRIO_TBL_PRIO_SHIFT 1 + +/* + * BT Coexistence Priority table + * REPLY_BT_COEX_PRIO_TABLE = 0xcc + */ +enum bt_coex_prio_table_events { + BT_COEX_PRIO_TBL_EVT_INIT_CALIB1 = 0, + BT_COEX_PRIO_TBL_EVT_INIT_CALIB2 = 1, + BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1 = 2, + BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2 = 3, /* DC calib */ + BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1 = 4, + BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2 = 5, + BT_COEX_PRIO_TBL_EVT_DTIM = 6, + BT_COEX_PRIO_TBL_EVT_SCAN52 = 7, + BT_COEX_PRIO_TBL_EVT_SCAN24 = 8, + BT_COEX_PRIO_TBL_EVT_RESERVED0 = 9, + BT_COEX_PRIO_TBL_EVT_RESERVED1 = 10, + BT_COEX_PRIO_TBL_EVT_RESERVED2 = 11, + BT_COEX_PRIO_TBL_EVT_RESERVED3 = 12, + BT_COEX_PRIO_TBL_EVT_RESERVED4 = 13, + BT_COEX_PRIO_TBL_EVT_RESERVED5 = 14, + BT_COEX_PRIO_TBL_EVT_RESERVED6 = 15, + /* BT_COEX_PRIO_TBL_EVT_MAX should always be last */ + BT_COEX_PRIO_TBL_EVT_MAX, +}; + +enum bt_coex_prio_table_priorities { + BT_COEX_PRIO_TBL_DISABLED = 0, + BT_COEX_PRIO_TBL_PRIO_LOW = 1, + BT_COEX_PRIO_TBL_PRIO_HIGH = 2, + BT_COEX_PRIO_TBL_PRIO_BYPASS = 3, + BT_COEX_PRIO_TBL_PRIO_COEX_OFF = 4, + BT_COEX_PRIO_TBL_PRIO_COEX_ON = 5, + BT_COEX_PRIO_TBL_PRIO_RSRVD1 = 6, + BT_COEX_PRIO_TBL_PRIO_RSRVD2 = 7, + BT_COEX_PRIO_TBL_MAX, +}; + +struct iwl_bt_coex_prio_table_cmd { + u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX]; +} __attribute__((packed)); + +#define IWL_BT_COEX_ENV_CLOSE 0 +#define IWL_BT_COEX_ENV_OPEN 1 +/* + * BT Protection Envelope + * REPLY_BT_COEX_PROT_ENV = 0xcd + */ +struct iwl_bt_coex_prot_env_cmd { + u8 action; /* 0 = closed, 1 = open */ + u8 type; /* 0 .. 15 */ + u8 reserved[2]; +} __attribute__((packed)); + +/* + * REPLY_D3_CONFIG + */ +enum iwlagn_d3_wakeup_filters { + IWLAGN_D3_WAKEUP_RFKILL = BIT(0), + IWLAGN_D3_WAKEUP_SYSASSERT = BIT(1), +}; + +struct iwlagn_d3_config_cmd { + __le32 min_sleep_time; + __le32 wakeup_flags; +} __packed; + +/* + * REPLY_WOWLAN_PATTERNS + */ +#define IWLAGN_WOWLAN_MIN_PATTERN_LEN 16 +#define IWLAGN_WOWLAN_MAX_PATTERN_LEN 128 + +struct iwlagn_wowlan_pattern { + u8 mask[IWLAGN_WOWLAN_MAX_PATTERN_LEN / 8]; + u8 pattern[IWLAGN_WOWLAN_MAX_PATTERN_LEN]; + u8 mask_size; + u8 pattern_size; + __le16 reserved; +} __packed; + +#define IWLAGN_WOWLAN_MAX_PATTERNS 20 + +struct iwlagn_wowlan_patterns_cmd { + __le32 n_patterns; + struct iwlagn_wowlan_pattern patterns[]; +} __packed; + +/* + * REPLY_WOWLAN_WAKEUP_FILTER + */ +enum iwlagn_wowlan_wakeup_filters { + IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET = BIT(0), + IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH = BIT(1), + IWLAGN_WOWLAN_WAKEUP_BEACON_MISS = BIT(2), + IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE = BIT(3), + IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL = BIT(4), + IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ = BIT(5), + IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE = BIT(6), + IWLAGN_WOWLAN_WAKEUP_ALWAYS = BIT(7), + IWLAGN_WOWLAN_WAKEUP_ENABLE_NET_DETECT = BIT(8), +}; + +struct iwlagn_wowlan_wakeup_filter_cmd { + __le32 enabled; + __le16 non_qos_seq; + __le16 reserved; + __le16 qos_seq[8]; +}; + +/* + * REPLY_WOWLAN_TSC_RSC_PARAMS + */ +#define IWLAGN_NUM_RSC 16 + +struct tkip_sc { + __le16 iv16; + __le16 pad; + __le32 iv32; +} __packed; + +struct iwlagn_tkip_rsc_tsc { + struct tkip_sc unicast_rsc[IWLAGN_NUM_RSC]; + struct tkip_sc multicast_rsc[IWLAGN_NUM_RSC]; + struct tkip_sc tsc; +} __packed; + +struct aes_sc { + __le64 pn; +} __packed; + +struct iwlagn_aes_rsc_tsc { + struct aes_sc unicast_rsc[IWLAGN_NUM_RSC]; + struct aes_sc multicast_rsc[IWLAGN_NUM_RSC]; + struct aes_sc tsc; +} __packed; + +union iwlagn_all_tsc_rsc { + struct iwlagn_tkip_rsc_tsc tkip; + struct iwlagn_aes_rsc_tsc aes; +}; + +struct iwlagn_wowlan_rsc_tsc_params_cmd { + union iwlagn_all_tsc_rsc all_tsc_rsc; +} __packed; + +/* + * REPLY_WOWLAN_TKIP_PARAMS + */ +#define IWLAGN_MIC_KEY_SIZE 8 +#define IWLAGN_P1K_SIZE 5 +struct iwlagn_mic_keys { + u8 tx[IWLAGN_MIC_KEY_SIZE]; + u8 rx_unicast[IWLAGN_MIC_KEY_SIZE]; + u8 rx_mcast[IWLAGN_MIC_KEY_SIZE]; +} __packed; + +struct iwlagn_p1k_cache { + __le16 p1k[IWLAGN_P1K_SIZE]; +} __packed; + +#define IWLAGN_NUM_RX_P1K_CACHE 2 + +struct iwlagn_wowlan_tkip_params_cmd { + struct iwlagn_mic_keys mic_keys; + struct iwlagn_p1k_cache tx; + struct iwlagn_p1k_cache rx_uni[IWLAGN_NUM_RX_P1K_CACHE]; + struct iwlagn_p1k_cache rx_multi[IWLAGN_NUM_RX_P1K_CACHE]; +} __packed; + +/* + * REPLY_WOWLAN_KEK_KCK_MATERIAL + */ + +#define IWLAGN_KCK_MAX_SIZE 32 +#define IWLAGN_KEK_MAX_SIZE 32 + +struct iwlagn_wowlan_kek_kck_material_cmd { + u8 kck[IWLAGN_KCK_MAX_SIZE]; + u8 kek[IWLAGN_KEK_MAX_SIZE]; + __le16 kck_len; + __le16 kek_len; + __le64 replay_ctr; +} __packed; + +/* + * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification) + */ + +/* + * Minimum slot time in TU + */ +#define IWL_MIN_SLOT_TIME 20 + +/** + * struct iwl_wipan_slot + * @width: Time in TU + * @type: + * 0 - BSS + * 1 - PAN + */ +struct iwl_wipan_slot { + __le16 width; + u8 type; + u8 reserved; +} __packed; + +#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_CTS BIT(1) /* reserved */ +#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_QUIET BIT(2) /* reserved */ +#define IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE BIT(3) /* reserved */ +#define IWL_WIPAN_PARAMS_FLG_FILTER_BEACON_NOTIF BIT(4) +#define IWL_WIPAN_PARAMS_FLG_FULL_SLOTTED_MODE BIT(5) + +/** + * struct iwl_wipan_params_cmd + * @flags: + * bit0: reserved + * bit1: CP leave channel with CTS + * bit2: CP leave channel qith Quiet + * bit3: slotted mode + * 1 - work in slotted mode + * 0 - work in non slotted mode + * bit4: filter beacon notification + * bit5: full tx slotted mode. if this flag is set, + * uCode will perform leaving channel methods in context switch + * also when working in same channel mode + * @num_slots: 1 - 10 + */ +struct iwl_wipan_params_cmd { + __le16 flags; + u8 reserved; + u8 num_slots; + struct iwl_wipan_slot slots[10]; +} __packed; + +/* + * REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9 + * + * TODO: Figure out what this is used for, + * it can only switch between 2.4 GHz + * channels!! + */ + +struct iwl_wipan_p2p_channel_switch_cmd { + __le16 channel; + __le16 reserved; +}; + +/* + * REPLY_WIPAN_NOA_NOTIFICATION = 0xbc + * + * This is used by the device to notify us of the + * NoA schedule it determined so we can forward it + * to userspace for inclusion in probe responses. + * + * In beacons, the NoA schedule is simply appended + * to the frame we give the device. + */ + +struct iwl_wipan_noa_descriptor { + u8 count; + __le32 duration; + __le32 interval; + __le32 starttime; +} __packed; + +struct iwl_wipan_noa_attribute { + u8 id; + __le16 length; + u8 index; + u8 ct_window; + struct iwl_wipan_noa_descriptor descr0, descr1; + u8 reserved; +} __packed; + +struct iwl_wipan_noa_notification { + u32 noa_active; + struct iwl_wipan_noa_attribute noa_attribute; +} __packed; + +#endif /* __iwl_commands_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c new file mode 100644 index 00000000000..46782f1102a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -0,0 +1,2436 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/debugfs.h> +#include <linux/ieee80211.h> +#include <net/mac80211.h> +#include "iwl-debug.h" +#include "iwl-io.h" +#include "dev.h" +#include "agn.h" + +/* create and remove of files */ +#define DEBUGFS_ADD_FILE(name, parent, mode) do { \ + if (!debugfs_create_file(#name, mode, parent, priv, \ + &iwl_dbgfs_##name##_ops)) \ + goto err; \ +} while (0) + +#define DEBUGFS_ADD_BOOL(name, parent, ptr) do { \ + struct dentry *__tmp; \ + __tmp = debugfs_create_bool(#name, S_IWUSR | S_IRUSR, \ + parent, ptr); \ + if (IS_ERR(__tmp) || !__tmp) \ + goto err; \ +} while (0) + +#define DEBUGFS_ADD_X32(name, parent, ptr) do { \ + struct dentry *__tmp; \ + __tmp = debugfs_create_x32(#name, S_IWUSR | S_IRUSR, \ + parent, ptr); \ + if (IS_ERR(__tmp) || !__tmp) \ + goto err; \ +} while (0) + +#define DEBUGFS_ADD_U32(name, parent, ptr, mode) do { \ + struct dentry *__tmp; \ + __tmp = debugfs_create_u32(#name, mode, \ + parent, ptr); \ + if (IS_ERR(__tmp) || !__tmp) \ + goto err; \ +} while (0) + +/* file operation */ +#define DEBUGFS_READ_FUNC(name) \ +static ssize_t iwl_dbgfs_##name##_read(struct file *file, \ + char __user *user_buf, \ + size_t count, loff_t *ppos); + +#define DEBUGFS_WRITE_FUNC(name) \ +static ssize_t iwl_dbgfs_##name##_write(struct file *file, \ + const char __user *user_buf, \ + size_t count, loff_t *ppos); + + +#define DEBUGFS_READ_FILE_OPS(name) \ + DEBUGFS_READ_FUNC(name); \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .read = iwl_dbgfs_##name##_read, \ + .open = simple_open, \ + .llseek = generic_file_llseek, \ +}; + +#define DEBUGFS_WRITE_FILE_OPS(name) \ + DEBUGFS_WRITE_FUNC(name); \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .write = iwl_dbgfs_##name##_write, \ + .open = simple_open, \ + .llseek = generic_file_llseek, \ +}; + + +#define DEBUGFS_READ_WRITE_FILE_OPS(name) \ + DEBUGFS_READ_FUNC(name); \ + DEBUGFS_WRITE_FUNC(name); \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .write = iwl_dbgfs_##name##_write, \ + .read = iwl_dbgfs_##name##_read, \ + .open = simple_open, \ + .llseek = generic_file_llseek, \ +}; + +static ssize_t iwl_dbgfs_sram_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + u32 val = 0; + char *buf; + ssize_t ret; + int i = 0; + bool device_format = false; + int offset = 0; + int len = 0; + int pos = 0; + int sram; + struct iwl_priv *priv = file->private_data; + const struct fw_img *img; + size_t bufsz; + + /* default is to dump the entire data segment */ + if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { + priv->dbgfs_sram_offset = 0x800000; + if (!priv->ucode_loaded) + return -EINVAL; + img = &priv->fw->img[priv->cur_ucode]; + priv->dbgfs_sram_len = img->sec[IWL_UCODE_SECTION_DATA].len; + } + len = priv->dbgfs_sram_len; + + if (len == -4) { + device_format = true; + len = 4; + } + + bufsz = 50 + len * 4; + buf = kmalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n", + len); + pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n", + priv->dbgfs_sram_offset); + + /* adjust sram address since reads are only on even u32 boundaries */ + offset = priv->dbgfs_sram_offset & 0x3; + sram = priv->dbgfs_sram_offset & ~0x3; + + /* read the first u32 from sram */ + val = iwl_read_targ_mem(priv->trans, sram); + + for (; len; len--) { + /* put the address at the start of every line */ + if (i == 0) + pos += scnprintf(buf + pos, bufsz - pos, + "%08X: ", sram + offset); + + if (device_format) + pos += scnprintf(buf + pos, bufsz - pos, + "%02x", (val >> (8 * (3 - offset))) & 0xff); + else + pos += scnprintf(buf + pos, bufsz - pos, + "%02x ", (val >> (8 * offset)) & 0xff); + + /* if all bytes processed, read the next u32 from sram */ + if (++offset == 4) { + sram += 4; + offset = 0; + val = iwl_read_targ_mem(priv->trans, sram); + } + + /* put in extra spaces and split lines for human readability */ + if (++i == 16) { + i = 0; + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + } else if (!(i & 7)) { + pos += scnprintf(buf + pos, bufsz - pos, " "); + } else if (!(i & 3)) { + pos += scnprintf(buf + pos, bufsz - pos, " "); + } + } + if (i) + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_sram_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[64]; + int buf_size; + u32 offset, len; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x,%x", &offset, &len) == 2) { + priv->dbgfs_sram_offset = offset; + priv->dbgfs_sram_len = len; + } else if (sscanf(buf, "%x", &offset) == 1) { + priv->dbgfs_sram_offset = offset; + priv->dbgfs_sram_len = -4; + } else { + priv->dbgfs_sram_offset = 0; + priv->dbgfs_sram_len = 0; + } + + return count; +} + +static ssize_t iwl_dbgfs_wowlan_sram_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + const struct fw_img *img = &priv->fw->img[IWL_UCODE_WOWLAN]; + + if (!priv->wowlan_sram) + return -ENODATA; + + return simple_read_from_buffer(user_buf, count, ppos, + priv->wowlan_sram, + img->sec[IWL_UCODE_SECTION_DATA].len); +} +static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + struct iwl_station_entry *station; + struct iwl_tid_data *tid_data; + char *buf; + int i, j, pos = 0; + ssize_t ret; + /* Add 30 for initial string */ + const size_t bufsz = 30 + sizeof(char) * 500 * (priv->num_stations); + + buf = kmalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n", + priv->num_stations); + + for (i = 0; i < IWLAGN_STATION_COUNT; i++) { + station = &priv->stations[i]; + if (!station->used) + continue; + pos += scnprintf(buf + pos, bufsz - pos, + "station %d - addr: %pM, flags: %#x\n", + i, station->sta.sta.addr, + station->sta.station_flags_msk); + pos += scnprintf(buf + pos, bufsz - pos, + "TID seqno next_rclmd " + "rate_n_flags state txq\n"); + + for (j = 0; j < IWL_MAX_TID_COUNT; j++) { + tid_data = &priv->tid_data[i][j]; + pos += scnprintf(buf + pos, bufsz - pos, + "%d: 0x%.4x 0x%.4x 0x%.8x " + "%d %.2d", + j, tid_data->seq_number, + tid_data->next_reclaimed, + tid_data->agg.rate_n_flags, + tid_data->agg.state, + tid_data->agg.txq_id); + + if (tid_data->agg.wait_for_ba) + pos += scnprintf(buf + pos, bufsz - pos, + " - waitforba"); + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + } + + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_nvm_read(struct file *file, + char __user *user_buf, + size_t count, + loff_t *ppos) +{ + ssize_t ret; + struct iwl_priv *priv = file->private_data; + int pos = 0, ofs = 0, buf_size = 0; + const u8 *ptr; + char *buf; + u16 eeprom_ver; + size_t eeprom_len = priv->eeprom_blob_size; + buf_size = 4 * eeprom_len + 256; + + if (eeprom_len % 16) + return -ENODATA; + + ptr = priv->eeprom_blob; + if (!ptr) + return -ENOMEM; + + /* 4 characters for byte 0xYY */ + buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + eeprom_ver = priv->eeprom_data->eeprom_version; + pos += scnprintf(buf + pos, buf_size - pos, + "NVM version: 0x%x\n", eeprom_ver); + for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) { + pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs); + hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos, + buf_size - pos, 0); + pos += strlen(buf + pos); + if (buf_size - pos > 0) + buf[pos++] = '\n'; + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + struct ieee80211_channel *channels = NULL; + const struct ieee80211_supported_band *supp_band = NULL; + int pos = 0, i, bufsz = PAGE_SIZE; + char *buf; + ssize_t ret; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ); + if (supp_band) { + channels = supp_band->channels; + + pos += scnprintf(buf + pos, bufsz - pos, + "Displaying %d channels in 2.4GHz band 802.11bg):\n", + supp_band->n_channels); + + for (i = 0; i < supp_band->n_channels; i++) + pos += scnprintf(buf + pos, bufsz - pos, + "%d: %ddBm: BSS%s%s, %s.\n", + channels[i].hw_value, + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + } + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ); + if (supp_band) { + channels = supp_band->channels; + + pos += scnprintf(buf + pos, bufsz - pos, + "Displaying %d channels in 5.2GHz band (802.11a)\n", + supp_band->n_channels); + + for (i = 0; i < supp_band->n_channels; i++) + pos += scnprintf(buf + pos, bufsz - pos, + "%d: %ddBm: BSS%s%s, %s.\n", + channels[i].hw_value, + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + } + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_status_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + char buf[512]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n", + test_bit(STATUS_RF_KILL_HW, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n", + test_bit(STATUS_CT_KILL, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n", + test_bit(STATUS_ALIVE, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n", + test_bit(STATUS_READY, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n", + test_bit(STATUS_EXIT_PENDING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n", + test_bit(STATUS_STATISTICS, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n", + test_bit(STATUS_SCANNING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n", + test_bit(STATUS_SCAN_ABORTING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n", + test_bit(STATUS_SCAN_HW, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n", + test_bit(STATUS_POWER_PMI, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n", + test_bit(STATUS_FW_ERROR, &priv->status)); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_rx_handlers_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + + int pos = 0; + int cnt = 0; + char *buf; + int bufsz = 24 * 64; /* 24 items * 64 char per item */ + ssize_t ret; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + for (cnt = 0; cnt < REPLY_MAX; cnt++) { + if (priv->rx_handlers_stats[cnt] > 0) + pos += scnprintf(buf + pos, bufsz - pos, + "\tRx handler[%36s]:\t\t %u\n", + iwl_dvm_get_cmd_string(cnt), + priv->rx_handlers_stats[cnt]); + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_rx_handlers_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + + char buf[8]; + int buf_size; + u32 reset_flag; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%x", &reset_flag) != 1) + return -EFAULT; + if (reset_flag == 0) + memset(&priv->rx_handlers_stats[0], 0, + sizeof(priv->rx_handlers_stats)); + + return count; +} + +static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + struct iwl_rxon_context *ctx; + int pos = 0, i; + char buf[256 * NUM_IWL_RXON_CTX]; + const size_t bufsz = sizeof(buf); + + for_each_context(priv, ctx) { + pos += scnprintf(buf + pos, bufsz - pos, "context %d:\n", + ctx->ctxid); + for (i = 0; i < AC_NUM; i++) { + pos += scnprintf(buf + pos, bufsz - pos, + "\tcw_min\tcw_max\taifsn\ttxop\n"); + pos += scnprintf(buf + pos, bufsz - pos, + "AC[%d]\t%u\t%u\t%u\t%u\n", i, + ctx->qos_data.def_qos_parm.ac[i].cw_min, + ctx->qos_data.def_qos_parm.ac[i].cw_max, + ctx->qos_data.def_qos_parm.ac[i].aifsn, + ctx->qos_data.def_qos_parm.ac[i].edca_txop); + } + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + } + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + char buf[100]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, + "Thermal Throttling Mode: %s\n", + tt->advanced_tt ? "Advance" : "Legacy"); + pos += scnprintf(buf + pos, bufsz - pos, + "Thermal Throttling State: %d\n", + tt->state); + if (tt->advanced_tt) { + restriction = tt->restriction + tt->state; + pos += scnprintf(buf + pos, bufsz - pos, + "Tx mode: %d\n", + restriction->tx_stream); + pos += scnprintf(buf + pos, bufsz - pos, + "Rx mode: %d\n", + restriction->rx_stream); + pos += scnprintf(buf + pos, bufsz - pos, + "HT mode: %d\n", + restriction->is_ht); + } + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_disable_ht40_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int ht40; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &ht40) != 1) + return -EFAULT; + if (!iwl_is_any_associated(priv)) + priv->disable_ht40 = ht40 ? true : false; + else + return -EINVAL; + + return count; +} + +static ssize_t iwl_dbgfs_disable_ht40_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[100]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, + "11n 40MHz Mode: %s\n", + priv->disable_ht40 ? "Disabled" : "Enabled"); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_temperature_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "%d\n", priv->temperature); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + + +static ssize_t iwl_dbgfs_sleep_level_override_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int value; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%d", &value) != 1) + return -EINVAL; + + /* + * Our users expect 0 to be "CAM", but 0 isn't actually + * valid here. However, let's not confuse them and present + * IWL_POWER_INDEX_1 as "1", not "0". + */ + if (value == 0) + return -EINVAL; + else if (value > 0) + value -= 1; + + if (value != -1 && (value < 0 || value >= IWL_POWER_NUM)) + return -EINVAL; + + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + + priv->power_data.debug_sleep_level_override = value; + + mutex_lock(&priv->mutex); + iwl_power_update_mode(priv, true); + mutex_unlock(&priv->mutex); + + return count; +} + +static ssize_t iwl_dbgfs_sleep_level_override_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[10]; + int pos, value; + const size_t bufsz = sizeof(buf); + + /* see the write function */ + value = priv->power_data.debug_sleep_level_override; + if (value >= 0) + value += 1; + + pos = scnprintf(buf, bufsz, "%d\n", value); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[200]; + int pos = 0, i; + const size_t bufsz = sizeof(buf); + struct iwl_powertable_cmd *cmd = &priv->power_data.sleep_cmd; + + pos += scnprintf(buf + pos, bufsz - pos, + "flags: %#.2x\n", le16_to_cpu(cmd->flags)); + pos += scnprintf(buf + pos, bufsz - pos, + "RX/TX timeout: %d/%d usec\n", + le32_to_cpu(cmd->rx_data_timeout), + le32_to_cpu(cmd->tx_data_timeout)); + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + pos += scnprintf(buf + pos, bufsz - pos, + "sleep_interval[%d]: %d\n", i, + le32_to_cpu(cmd->sleep_interval[i])); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +DEBUGFS_READ_WRITE_FILE_OPS(sram); +DEBUGFS_READ_FILE_OPS(wowlan_sram); +DEBUGFS_READ_FILE_OPS(nvm); +DEBUGFS_READ_FILE_OPS(stations); +DEBUGFS_READ_FILE_OPS(channels); +DEBUGFS_READ_FILE_OPS(status); +DEBUGFS_READ_WRITE_FILE_OPS(rx_handlers); +DEBUGFS_READ_FILE_OPS(qos); +DEBUGFS_READ_FILE_OPS(thermal_throttling); +DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40); +DEBUGFS_READ_FILE_OPS(temperature); +DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override); +DEBUGFS_READ_FILE_OPS(current_sleep_command); + +static const char *fmt_value = " %-30s %10u\n"; +static const char *fmt_hex = " %-30s 0x%02X\n"; +static const char *fmt_table = " %-30s %10u %10u %10u %10u\n"; +static const char *fmt_header = + "%-32s current cumulative delta max\n"; + +static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz) +{ + int p = 0; + u32 flag; + + lockdep_assert_held(&priv->statistics.lock); + + flag = le32_to_cpu(priv->statistics.flag); + + p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", flag); + if (flag & UCODE_STATISTICS_CLEAR_MSK) + p += scnprintf(buf + p, bufsz - p, + "\tStatistics have been cleared\n"); + p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n", + (flag & UCODE_STATISTICS_FREQUENCY_MSK) + ? "2.4 GHz" : "5.2 GHz"); + p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n", + (flag & UCODE_STATISTICS_NARROW_BAND_MSK) + ? "enabled" : "disabled"); + + return p; +} + +static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = sizeof(struct statistics_rx_phy) * 40 + + sizeof(struct statistics_rx_non_phy) * 40 + + sizeof(struct statistics_rx_ht_phy) * 40 + 400; + ssize_t ret; + struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm; + struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck; + struct statistics_rx_non_phy *general, *accum_general; + struct statistics_rx_non_phy *delta_general, *max_general; + struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* + * the statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + spin_lock_bh(&priv->statistics.lock); + ofdm = &priv->statistics.rx_ofdm; + cck = &priv->statistics.rx_cck; + general = &priv->statistics.rx_non_phy; + ht = &priv->statistics.rx_ofdm_ht; + accum_ofdm = &priv->accum_stats.rx_ofdm; + accum_cck = &priv->accum_stats.rx_cck; + accum_general = &priv->accum_stats.rx_non_phy; + accum_ht = &priv->accum_stats.rx_ofdm_ht; + delta_ofdm = &priv->delta_stats.rx_ofdm; + delta_cck = &priv->delta_stats.rx_cck; + delta_general = &priv->delta_stats.rx_non_phy; + delta_ht = &priv->delta_stats.rx_ofdm_ht; + max_ofdm = &priv->max_delta_stats.rx_ofdm; + max_cck = &priv->max_delta_stats.rx_cck; + max_general = &priv->max_delta_stats.rx_non_phy; + max_ht = &priv->max_delta_stats.rx_ofdm_ht; + + pos += iwl_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_Rx - OFDM:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "ina_cnt:", + le32_to_cpu(ofdm->ina_cnt), + accum_ofdm->ina_cnt, + delta_ofdm->ina_cnt, max_ofdm->ina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_cnt:", + le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt, + delta_ofdm->fina_cnt, max_ofdm->fina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "plcp_err:", + le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err, + delta_ofdm->plcp_err, max_ofdm->plcp_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_err:", + le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err, + delta_ofdm->crc32_err, max_ofdm->crc32_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "overrun_err:", + le32_to_cpu(ofdm->overrun_err), + accum_ofdm->overrun_err, delta_ofdm->overrun_err, + max_ofdm->overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "early_overrun_err:", + le32_to_cpu(ofdm->early_overrun_err), + accum_ofdm->early_overrun_err, + delta_ofdm->early_overrun_err, + max_ofdm->early_overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_good:", + le32_to_cpu(ofdm->crc32_good), + accum_ofdm->crc32_good, delta_ofdm->crc32_good, + max_ofdm->crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "false_alarm_cnt:", + le32_to_cpu(ofdm->false_alarm_cnt), + accum_ofdm->false_alarm_cnt, + delta_ofdm->false_alarm_cnt, + max_ofdm->false_alarm_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_sync_err_cnt:", + le32_to_cpu(ofdm->fina_sync_err_cnt), + accum_ofdm->fina_sync_err_cnt, + delta_ofdm->fina_sync_err_cnt, + max_ofdm->fina_sync_err_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sfd_timeout:", + le32_to_cpu(ofdm->sfd_timeout), + accum_ofdm->sfd_timeout, delta_ofdm->sfd_timeout, + max_ofdm->sfd_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_timeout:", + le32_to_cpu(ofdm->fina_timeout), + accum_ofdm->fina_timeout, delta_ofdm->fina_timeout, + max_ofdm->fina_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "unresponded_rts:", + le32_to_cpu(ofdm->unresponded_rts), + accum_ofdm->unresponded_rts, + delta_ofdm->unresponded_rts, + max_ofdm->unresponded_rts); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "rxe_frame_lmt_ovrun:", + le32_to_cpu(ofdm->rxe_frame_limit_overrun), + accum_ofdm->rxe_frame_limit_overrun, + delta_ofdm->rxe_frame_limit_overrun, + max_ofdm->rxe_frame_limit_overrun); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_ack_cnt:", + le32_to_cpu(ofdm->sent_ack_cnt), + accum_ofdm->sent_ack_cnt, delta_ofdm->sent_ack_cnt, + max_ofdm->sent_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_cts_cnt:", + le32_to_cpu(ofdm->sent_cts_cnt), + accum_ofdm->sent_cts_cnt, delta_ofdm->sent_cts_cnt, + max_ofdm->sent_cts_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_ba_rsp_cnt:", + le32_to_cpu(ofdm->sent_ba_rsp_cnt), + accum_ofdm->sent_ba_rsp_cnt, + delta_ofdm->sent_ba_rsp_cnt, + max_ofdm->sent_ba_rsp_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "dsp_self_kill:", + le32_to_cpu(ofdm->dsp_self_kill), + accum_ofdm->dsp_self_kill, + delta_ofdm->dsp_self_kill, + max_ofdm->dsp_self_kill); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "mh_format_err:", + le32_to_cpu(ofdm->mh_format_err), + accum_ofdm->mh_format_err, + delta_ofdm->mh_format_err, + max_ofdm->mh_format_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "re_acq_main_rssi_sum:", + le32_to_cpu(ofdm->re_acq_main_rssi_sum), + accum_ofdm->re_acq_main_rssi_sum, + delta_ofdm->re_acq_main_rssi_sum, + max_ofdm->re_acq_main_rssi_sum); + + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_Rx - CCK:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "ina_cnt:", + le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt, + delta_cck->ina_cnt, max_cck->ina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_cnt:", + le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt, + delta_cck->fina_cnt, max_cck->fina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "plcp_err:", + le32_to_cpu(cck->plcp_err), accum_cck->plcp_err, + delta_cck->plcp_err, max_cck->plcp_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_err:", + le32_to_cpu(cck->crc32_err), accum_cck->crc32_err, + delta_cck->crc32_err, max_cck->crc32_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "overrun_err:", + le32_to_cpu(cck->overrun_err), + accum_cck->overrun_err, delta_cck->overrun_err, + max_cck->overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "early_overrun_err:", + le32_to_cpu(cck->early_overrun_err), + accum_cck->early_overrun_err, + delta_cck->early_overrun_err, + max_cck->early_overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_good:", + le32_to_cpu(cck->crc32_good), accum_cck->crc32_good, + delta_cck->crc32_good, max_cck->crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "false_alarm_cnt:", + le32_to_cpu(cck->false_alarm_cnt), + accum_cck->false_alarm_cnt, + delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_sync_err_cnt:", + le32_to_cpu(cck->fina_sync_err_cnt), + accum_cck->fina_sync_err_cnt, + delta_cck->fina_sync_err_cnt, + max_cck->fina_sync_err_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sfd_timeout:", + le32_to_cpu(cck->sfd_timeout), + accum_cck->sfd_timeout, delta_cck->sfd_timeout, + max_cck->sfd_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "fina_timeout:", + le32_to_cpu(cck->fina_timeout), + accum_cck->fina_timeout, delta_cck->fina_timeout, + max_cck->fina_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "unresponded_rts:", + le32_to_cpu(cck->unresponded_rts), + accum_cck->unresponded_rts, delta_cck->unresponded_rts, + max_cck->unresponded_rts); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "rxe_frame_lmt_ovrun:", + le32_to_cpu(cck->rxe_frame_limit_overrun), + accum_cck->rxe_frame_limit_overrun, + delta_cck->rxe_frame_limit_overrun, + max_cck->rxe_frame_limit_overrun); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_ack_cnt:", + le32_to_cpu(cck->sent_ack_cnt), + accum_cck->sent_ack_cnt, delta_cck->sent_ack_cnt, + max_cck->sent_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_cts_cnt:", + le32_to_cpu(cck->sent_cts_cnt), + accum_cck->sent_cts_cnt, delta_cck->sent_cts_cnt, + max_cck->sent_cts_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sent_ba_rsp_cnt:", + le32_to_cpu(cck->sent_ba_rsp_cnt), + accum_cck->sent_ba_rsp_cnt, + delta_cck->sent_ba_rsp_cnt, + max_cck->sent_ba_rsp_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "dsp_self_kill:", + le32_to_cpu(cck->dsp_self_kill), + accum_cck->dsp_self_kill, delta_cck->dsp_self_kill, + max_cck->dsp_self_kill); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "mh_format_err:", + le32_to_cpu(cck->mh_format_err), + accum_cck->mh_format_err, delta_cck->mh_format_err, + max_cck->mh_format_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "re_acq_main_rssi_sum:", + le32_to_cpu(cck->re_acq_main_rssi_sum), + accum_cck->re_acq_main_rssi_sum, + delta_cck->re_acq_main_rssi_sum, + max_cck->re_acq_main_rssi_sum); + + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_Rx - GENERAL:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "bogus_cts:", + le32_to_cpu(general->bogus_cts), + accum_general->bogus_cts, delta_general->bogus_cts, + max_general->bogus_cts); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "bogus_ack:", + le32_to_cpu(general->bogus_ack), + accum_general->bogus_ack, delta_general->bogus_ack, + max_general->bogus_ack); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "non_bssid_frames:", + le32_to_cpu(general->non_bssid_frames), + accum_general->non_bssid_frames, + delta_general->non_bssid_frames, + max_general->non_bssid_frames); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "filtered_frames:", + le32_to_cpu(general->filtered_frames), + accum_general->filtered_frames, + delta_general->filtered_frames, + max_general->filtered_frames); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "non_channel_beacons:", + le32_to_cpu(general->non_channel_beacons), + accum_general->non_channel_beacons, + delta_general->non_channel_beacons, + max_general->non_channel_beacons); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "channel_beacons:", + le32_to_cpu(general->channel_beacons), + accum_general->channel_beacons, + delta_general->channel_beacons, + max_general->channel_beacons); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "num_missed_bcon:", + le32_to_cpu(general->num_missed_bcon), + accum_general->num_missed_bcon, + delta_general->num_missed_bcon, + max_general->num_missed_bcon); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "adc_rx_saturation_time:", + le32_to_cpu(general->adc_rx_saturation_time), + accum_general->adc_rx_saturation_time, + delta_general->adc_rx_saturation_time, + max_general->adc_rx_saturation_time); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "ina_detect_search_tm:", + le32_to_cpu(general->ina_detection_search_time), + accum_general->ina_detection_search_time, + delta_general->ina_detection_search_time, + max_general->ina_detection_search_time); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_silence_rssi_a:", + le32_to_cpu(general->beacon_silence_rssi_a), + accum_general->beacon_silence_rssi_a, + delta_general->beacon_silence_rssi_a, + max_general->beacon_silence_rssi_a); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_silence_rssi_b:", + le32_to_cpu(general->beacon_silence_rssi_b), + accum_general->beacon_silence_rssi_b, + delta_general->beacon_silence_rssi_b, + max_general->beacon_silence_rssi_b); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_silence_rssi_c:", + le32_to_cpu(general->beacon_silence_rssi_c), + accum_general->beacon_silence_rssi_c, + delta_general->beacon_silence_rssi_c, + max_general->beacon_silence_rssi_c); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "interference_data_flag:", + le32_to_cpu(general->interference_data_flag), + accum_general->interference_data_flag, + delta_general->interference_data_flag, + max_general->interference_data_flag); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "channel_load:", + le32_to_cpu(general->channel_load), + accum_general->channel_load, + delta_general->channel_load, + max_general->channel_load); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "dsp_false_alarms:", + le32_to_cpu(general->dsp_false_alarms), + accum_general->dsp_false_alarms, + delta_general->dsp_false_alarms, + max_general->dsp_false_alarms); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_rssi_a:", + le32_to_cpu(general->beacon_rssi_a), + accum_general->beacon_rssi_a, + delta_general->beacon_rssi_a, + max_general->beacon_rssi_a); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_rssi_b:", + le32_to_cpu(general->beacon_rssi_b), + accum_general->beacon_rssi_b, + delta_general->beacon_rssi_b, + max_general->beacon_rssi_b); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_rssi_c:", + le32_to_cpu(general->beacon_rssi_c), + accum_general->beacon_rssi_c, + delta_general->beacon_rssi_c, + max_general->beacon_rssi_c); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_energy_a:", + le32_to_cpu(general->beacon_energy_a), + accum_general->beacon_energy_a, + delta_general->beacon_energy_a, + max_general->beacon_energy_a); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_energy_b:", + le32_to_cpu(general->beacon_energy_b), + accum_general->beacon_energy_b, + delta_general->beacon_energy_b, + max_general->beacon_energy_b); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "beacon_energy_c:", + le32_to_cpu(general->beacon_energy_c), + accum_general->beacon_energy_c, + delta_general->beacon_energy_c, + max_general->beacon_energy_c); + + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_Rx - OFDM_HT:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "plcp_err:", + le32_to_cpu(ht->plcp_err), accum_ht->plcp_err, + delta_ht->plcp_err, max_ht->plcp_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "overrun_err:", + le32_to_cpu(ht->overrun_err), accum_ht->overrun_err, + delta_ht->overrun_err, max_ht->overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "early_overrun_err:", + le32_to_cpu(ht->early_overrun_err), + accum_ht->early_overrun_err, + delta_ht->early_overrun_err, + max_ht->early_overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_good:", + le32_to_cpu(ht->crc32_good), accum_ht->crc32_good, + delta_ht->crc32_good, max_ht->crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "crc32_err:", + le32_to_cpu(ht->crc32_err), accum_ht->crc32_err, + delta_ht->crc32_err, max_ht->crc32_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "mh_format_err:", + le32_to_cpu(ht->mh_format_err), + accum_ht->mh_format_err, + delta_ht->mh_format_err, max_ht->mh_format_err); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg_crc32_good:", + le32_to_cpu(ht->agg_crc32_good), + accum_ht->agg_crc32_good, + delta_ht->agg_crc32_good, max_ht->agg_crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg_mpdu_cnt:", + le32_to_cpu(ht->agg_mpdu_cnt), + accum_ht->agg_mpdu_cnt, + delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg_cnt:", + le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt, + delta_ht->agg_cnt, max_ht->agg_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "unsupport_mcs:", + le32_to_cpu(ht->unsupport_mcs), + accum_ht->unsupport_mcs, + delta_ht->unsupport_mcs, max_ht->unsupport_mcs); + + spin_unlock_bh(&priv->statistics.lock); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = (sizeof(struct statistics_tx) * 48) + 250; + ssize_t ret; + struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* the statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + spin_lock_bh(&priv->statistics.lock); + + tx = &priv->statistics.tx; + accum_tx = &priv->accum_stats.tx; + delta_tx = &priv->delta_stats.tx; + max_tx = &priv->max_delta_stats.tx; + + pos += iwl_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_Tx:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "preamble:", + le32_to_cpu(tx->preamble_cnt), + accum_tx->preamble_cnt, + delta_tx->preamble_cnt, max_tx->preamble_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "rx_detected_cnt:", + le32_to_cpu(tx->rx_detected_cnt), + accum_tx->rx_detected_cnt, + delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "bt_prio_defer_cnt:", + le32_to_cpu(tx->bt_prio_defer_cnt), + accum_tx->bt_prio_defer_cnt, + delta_tx->bt_prio_defer_cnt, + max_tx->bt_prio_defer_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "bt_prio_kill_cnt:", + le32_to_cpu(tx->bt_prio_kill_cnt), + accum_tx->bt_prio_kill_cnt, + delta_tx->bt_prio_kill_cnt, + max_tx->bt_prio_kill_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "few_bytes_cnt:", + le32_to_cpu(tx->few_bytes_cnt), + accum_tx->few_bytes_cnt, + delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "cts_timeout:", + le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout, + delta_tx->cts_timeout, max_tx->cts_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "ack_timeout:", + le32_to_cpu(tx->ack_timeout), + accum_tx->ack_timeout, + delta_tx->ack_timeout, max_tx->ack_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "expected_ack_cnt:", + le32_to_cpu(tx->expected_ack_cnt), + accum_tx->expected_ack_cnt, + delta_tx->expected_ack_cnt, + max_tx->expected_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "actual_ack_cnt:", + le32_to_cpu(tx->actual_ack_cnt), + accum_tx->actual_ack_cnt, + delta_tx->actual_ack_cnt, + max_tx->actual_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "dump_msdu_cnt:", + le32_to_cpu(tx->dump_msdu_cnt), + accum_tx->dump_msdu_cnt, + delta_tx->dump_msdu_cnt, + max_tx->dump_msdu_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "abort_nxt_frame_mismatch:", + le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt), + accum_tx->burst_abort_next_frame_mismatch_cnt, + delta_tx->burst_abort_next_frame_mismatch_cnt, + max_tx->burst_abort_next_frame_mismatch_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "abort_missing_nxt_frame:", + le32_to_cpu(tx->burst_abort_missing_next_frame_cnt), + accum_tx->burst_abort_missing_next_frame_cnt, + delta_tx->burst_abort_missing_next_frame_cnt, + max_tx->burst_abort_missing_next_frame_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "cts_timeout_collision:", + le32_to_cpu(tx->cts_timeout_collision), + accum_tx->cts_timeout_collision, + delta_tx->cts_timeout_collision, + max_tx->cts_timeout_collision); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "ack_ba_timeout_collision:", + le32_to_cpu(tx->ack_or_ba_timeout_collision), + accum_tx->ack_or_ba_timeout_collision, + delta_tx->ack_or_ba_timeout_collision, + max_tx->ack_or_ba_timeout_collision); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg ba_timeout:", + le32_to_cpu(tx->agg.ba_timeout), + accum_tx->agg.ba_timeout, + delta_tx->agg.ba_timeout, + max_tx->agg.ba_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg ba_resched_frames:", + le32_to_cpu(tx->agg.ba_reschedule_frames), + accum_tx->agg.ba_reschedule_frames, + delta_tx->agg.ba_reschedule_frames, + max_tx->agg.ba_reschedule_frames); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg scd_query_agg_frame:", + le32_to_cpu(tx->agg.scd_query_agg_frame_cnt), + accum_tx->agg.scd_query_agg_frame_cnt, + delta_tx->agg.scd_query_agg_frame_cnt, + max_tx->agg.scd_query_agg_frame_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg scd_query_no_agg:", + le32_to_cpu(tx->agg.scd_query_no_agg), + accum_tx->agg.scd_query_no_agg, + delta_tx->agg.scd_query_no_agg, + max_tx->agg.scd_query_no_agg); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg scd_query_agg:", + le32_to_cpu(tx->agg.scd_query_agg), + accum_tx->agg.scd_query_agg, + delta_tx->agg.scd_query_agg, + max_tx->agg.scd_query_agg); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg scd_query_mismatch:", + le32_to_cpu(tx->agg.scd_query_mismatch), + accum_tx->agg.scd_query_mismatch, + delta_tx->agg.scd_query_mismatch, + max_tx->agg.scd_query_mismatch); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg frame_not_ready:", + le32_to_cpu(tx->agg.frame_not_ready), + accum_tx->agg.frame_not_ready, + delta_tx->agg.frame_not_ready, + max_tx->agg.frame_not_ready); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg underrun:", + le32_to_cpu(tx->agg.underrun), + accum_tx->agg.underrun, + delta_tx->agg.underrun, max_tx->agg.underrun); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg bt_prio_kill:", + le32_to_cpu(tx->agg.bt_prio_kill), + accum_tx->agg.bt_prio_kill, + delta_tx->agg.bt_prio_kill, + max_tx->agg.bt_prio_kill); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "agg rx_ba_rsp_cnt:", + le32_to_cpu(tx->agg.rx_ba_rsp_cnt), + accum_tx->agg.rx_ba_rsp_cnt, + delta_tx->agg.rx_ba_rsp_cnt, + max_tx->agg.rx_ba_rsp_cnt); + + if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) { + pos += scnprintf(buf + pos, bufsz - pos, + "tx power: (1/2 dB step)\n"); + if ((priv->eeprom_data->valid_tx_ant & ANT_A) && + tx->tx_power.ant_a) + pos += scnprintf(buf + pos, bufsz - pos, + fmt_hex, "antenna A:", + tx->tx_power.ant_a); + if ((priv->eeprom_data->valid_tx_ant & ANT_B) && + tx->tx_power.ant_b) + pos += scnprintf(buf + pos, bufsz - pos, + fmt_hex, "antenna B:", + tx->tx_power.ant_b); + if ((priv->eeprom_data->valid_tx_ant & ANT_C) && + tx->tx_power.ant_c) + pos += scnprintf(buf + pos, bufsz - pos, + fmt_hex, "antenna C:", + tx->tx_power.ant_c); + } + + spin_unlock_bh(&priv->statistics.lock); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = sizeof(struct statistics_general) * 10 + 300; + ssize_t ret; + struct statistics_general_common *general, *accum_general; + struct statistics_general_common *delta_general, *max_general; + struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg; + struct statistics_div *div, *accum_div, *delta_div, *max_div; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* the statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + + spin_lock_bh(&priv->statistics.lock); + + general = &priv->statistics.common; + dbg = &priv->statistics.common.dbg; + div = &priv->statistics.common.div; + accum_general = &priv->accum_stats.common; + accum_dbg = &priv->accum_stats.common.dbg; + accum_div = &priv->accum_stats.common.div; + delta_general = &priv->delta_stats.common; + max_general = &priv->max_delta_stats.common; + delta_dbg = &priv->delta_stats.common.dbg; + max_dbg = &priv->max_delta_stats.common.dbg; + delta_div = &priv->delta_stats.common.div; + max_div = &priv->max_delta_stats.common.div; + + pos += iwl_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_header, "Statistics_General:"); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_value, "temperature:", + le32_to_cpu(general->temperature)); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_value, "temperature_m:", + le32_to_cpu(general->temperature_m)); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_value, "ttl_timestamp:", + le32_to_cpu(general->ttl_timestamp)); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "burst_check:", + le32_to_cpu(dbg->burst_check), + accum_dbg->burst_check, + delta_dbg->burst_check, max_dbg->burst_check); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "burst_count:", + le32_to_cpu(dbg->burst_count), + accum_dbg->burst_count, + delta_dbg->burst_count, max_dbg->burst_count); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "wait_for_silence_timeout_count:", + le32_to_cpu(dbg->wait_for_silence_timeout_cnt), + accum_dbg->wait_for_silence_timeout_cnt, + delta_dbg->wait_for_silence_timeout_cnt, + max_dbg->wait_for_silence_timeout_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "sleep_time:", + le32_to_cpu(general->sleep_time), + accum_general->sleep_time, + delta_general->sleep_time, max_general->sleep_time); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "slots_out:", + le32_to_cpu(general->slots_out), + accum_general->slots_out, + delta_general->slots_out, max_general->slots_out); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "slots_idle:", + le32_to_cpu(general->slots_idle), + accum_general->slots_idle, + delta_general->slots_idle, max_general->slots_idle); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "tx_on_a:", + le32_to_cpu(div->tx_on_a), accum_div->tx_on_a, + delta_div->tx_on_a, max_div->tx_on_a); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "tx_on_b:", + le32_to_cpu(div->tx_on_b), accum_div->tx_on_b, + delta_div->tx_on_b, max_div->tx_on_b); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "exec_time:", + le32_to_cpu(div->exec_time), accum_div->exec_time, + delta_div->exec_time, max_div->exec_time); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "probe_time:", + le32_to_cpu(div->probe_time), accum_div->probe_time, + delta_div->probe_time, max_div->probe_time); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "rx_enable_counter:", + le32_to_cpu(general->rx_enable_counter), + accum_general->rx_enable_counter, + delta_general->rx_enable_counter, + max_general->rx_enable_counter); + pos += scnprintf(buf + pos, bufsz - pos, + fmt_table, "num_of_sos_states:", + le32_to_cpu(general->num_of_sos_states), + accum_general->num_of_sos_states, + delta_general->num_of_sos_states, + max_general->num_of_sos_states); + + spin_unlock_bh(&priv->statistics.lock); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + int pos = 0; + char *buf; + int bufsz = (sizeof(struct statistics_bt_activity) * 24) + 200; + ssize_t ret; + struct statistics_bt_activity *bt, *accum_bt; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + if (!priv->bt_enable_flag) + return -EINVAL; + + /* make request to uCode to retrieve statistics information */ + mutex_lock(&priv->mutex); + ret = iwl_send_statistics_request(priv, CMD_SYNC, false); + mutex_unlock(&priv->mutex); + + if (ret) + return -EAGAIN; + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* + * the statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + + spin_lock_bh(&priv->statistics.lock); + + bt = &priv->statistics.bt_activity; + accum_bt = &priv->accum_stats.bt_activity; + + pos += iwl_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, "Statistics_BT:\n"); + pos += scnprintf(buf + pos, bufsz - pos, + "\t\t\tcurrent\t\t\taccumulative\n"); + pos += scnprintf(buf + pos, bufsz - pos, + "hi_priority_tx_req_cnt:\t\t%u\t\t\t%u\n", + le32_to_cpu(bt->hi_priority_tx_req_cnt), + accum_bt->hi_priority_tx_req_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "hi_priority_tx_denied_cnt:\t%u\t\t\t%u\n", + le32_to_cpu(bt->hi_priority_tx_denied_cnt), + accum_bt->hi_priority_tx_denied_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "lo_priority_tx_req_cnt:\t\t%u\t\t\t%u\n", + le32_to_cpu(bt->lo_priority_tx_req_cnt), + accum_bt->lo_priority_tx_req_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n", + le32_to_cpu(bt->lo_priority_tx_denied_cnt), + accum_bt->lo_priority_tx_denied_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "hi_priority_rx_req_cnt:\t\t%u\t\t\t%u\n", + le32_to_cpu(bt->hi_priority_rx_req_cnt), + accum_bt->hi_priority_rx_req_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "hi_priority_rx_denied_cnt:\t%u\t\t\t%u\n", + le32_to_cpu(bt->hi_priority_rx_denied_cnt), + accum_bt->hi_priority_rx_denied_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "lo_priority_rx_req_cnt:\t\t%u\t\t\t%u\n", + le32_to_cpu(bt->lo_priority_rx_req_cnt), + accum_bt->lo_priority_rx_req_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n", + le32_to_cpu(bt->lo_priority_rx_denied_cnt), + accum_bt->lo_priority_rx_denied_cnt); + + pos += scnprintf(buf + pos, bufsz - pos, + "(rx)num_bt_kills:\t\t%u\t\t\t%u\n", + le32_to_cpu(priv->statistics.num_bt_kills), + priv->statistics.accum_num_bt_kills); + + spin_unlock_bh(&priv->statistics.lock); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_reply_tx_error_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + int pos = 0; + char *buf; + int bufsz = (sizeof(struct reply_tx_error_statistics) * 24) + + (sizeof(struct reply_agg_tx_error_statistics) * 24) + 200; + ssize_t ret; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n"); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_DELAY), + priv->reply_tx_stats.pp_delay); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_FEW_BYTES), + priv->reply_tx_stats.pp_few_bytes); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_BT_PRIO), + priv->reply_tx_stats.pp_bt_prio); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_QUIET_PERIOD), + priv->reply_tx_stats.pp_quiet_period); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_CALC_TTAK), + priv->reply_tx_stats.pp_calc_ttak); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_tx_fail_reason( + TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY), + priv->reply_tx_stats.int_crossed_retry); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_SHORT_LIMIT), + priv->reply_tx_stats.short_limit); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_LONG_LIMIT), + priv->reply_tx_stats.long_limit); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_UNDERRUN), + priv->reply_tx_stats.fifo_underrun); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_DRAIN_FLOW), + priv->reply_tx_stats.drain_flow); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_RFKILL_FLUSH), + priv->reply_tx_stats.rfkill_flush); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_LIFE_EXPIRE), + priv->reply_tx_stats.life_expire); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_DEST_PS), + priv->reply_tx_stats.dest_ps); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_HOST_ABORTED), + priv->reply_tx_stats.host_abort); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_BT_RETRY), + priv->reply_tx_stats.pp_delay); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_STA_INVALID), + priv->reply_tx_stats.sta_invalid); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_FRAG_DROPPED), + priv->reply_tx_stats.frag_drop); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_TID_DISABLE), + priv->reply_tx_stats.tid_disable); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_FLUSHED), + priv->reply_tx_stats.fifo_flush); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_tx_fail_reason( + TX_STATUS_FAIL_INSUFFICIENT_CF_POLL), + priv->reply_tx_stats.insuff_cf_poll); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_tx_fail_reason(TX_STATUS_FAIL_PASSIVE_NO_RX), + priv->reply_tx_stats.fail_hw_drop); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_tx_fail_reason( + TX_STATUS_FAIL_NO_BEACON_ON_RADAR), + priv->reply_tx_stats.sta_color_mismatch); + pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n", + priv->reply_tx_stats.unknown); + + pos += scnprintf(buf + pos, bufsz - pos, + "\nStatistics_Agg_TX_Error:\n"); + + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_UNDERRUN_MSK), + priv->reply_agg_tx_stats.underrun); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_BT_PRIO_MSK), + priv->reply_agg_tx_stats.bt_prio); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_FEW_BYTES_MSK), + priv->reply_agg_tx_stats.few_bytes); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_ABORT_MSK), + priv->reply_agg_tx_stats.abort); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_agg_tx_fail_reason( + AGG_TX_STATE_LAST_SENT_TTL_MSK), + priv->reply_agg_tx_stats.last_sent_ttl); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_agg_tx_fail_reason( + AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK), + priv->reply_agg_tx_stats.last_sent_try); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_agg_tx_fail_reason( + AGG_TX_STATE_LAST_SENT_BT_KILL_MSK), + priv->reply_agg_tx_stats.last_sent_bt_kill); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_SCD_QUERY_MSK), + priv->reply_agg_tx_stats.scd_query); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", + iwl_get_agg_tx_fail_reason( + AGG_TX_STATE_TEST_BAD_CRC32_MSK), + priv->reply_agg_tx_stats.bad_crc32); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_RESPONSE_MSK), + priv->reply_agg_tx_stats.response); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DUMP_TX_MSK), + priv->reply_agg_tx_stats.dump_tx); + pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", + iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DELAY_TX_MSK), + priv->reply_agg_tx_stats.delay_tx); + pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n", + priv->reply_agg_tx_stats.unknown); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_sensitivity_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int pos = 0; + int cnt = 0; + char *buf; + int bufsz = sizeof(struct iwl_sensitivity_data) * 4 + 100; + ssize_t ret; + struct iwl_sensitivity_data *data; + + data = &priv->sensitivity_data; + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm:\t\t\t %u\n", + data->auto_corr_ofdm); + pos += scnprintf(buf + pos, bufsz - pos, + "auto_corr_ofdm_mrc:\t\t %u\n", + data->auto_corr_ofdm_mrc); + pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm_x1:\t\t %u\n", + data->auto_corr_ofdm_x1); + pos += scnprintf(buf + pos, bufsz - pos, + "auto_corr_ofdm_mrc_x1:\t\t %u\n", + data->auto_corr_ofdm_mrc_x1); + pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck:\t\t\t %u\n", + data->auto_corr_cck); + pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck_mrc:\t\t %u\n", + data->auto_corr_cck_mrc); + pos += scnprintf(buf + pos, bufsz - pos, + "last_bad_plcp_cnt_ofdm:\t\t %u\n", + data->last_bad_plcp_cnt_ofdm); + pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_ofdm:\t\t %u\n", + data->last_fa_cnt_ofdm); + pos += scnprintf(buf + pos, bufsz - pos, + "last_bad_plcp_cnt_cck:\t\t %u\n", + data->last_bad_plcp_cnt_cck); + pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_cck:\t\t %u\n", + data->last_fa_cnt_cck); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_curr_state:\t\t\t %u\n", + data->nrg_curr_state); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_prev_state:\t\t\t %u\n", + data->nrg_prev_state); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_value:\t\t\t"); + for (cnt = 0; cnt < 10; cnt++) { + pos += scnprintf(buf + pos, bufsz - pos, " %u", + data->nrg_value[cnt]); + } + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_rssi:\t\t"); + for (cnt = 0; cnt < NRG_NUM_PREV_STAT_L; cnt++) { + pos += scnprintf(buf + pos, bufsz - pos, " %u", + data->nrg_silence_rssi[cnt]); + } + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_ref:\t\t %u\n", + data->nrg_silence_ref); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_energy_idx:\t\t\t %u\n", + data->nrg_energy_idx); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_idx:\t\t %u\n", + data->nrg_silence_idx); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_cck:\t\t\t %u\n", + data->nrg_th_cck); + pos += scnprintf(buf + pos, bufsz - pos, + "nrg_auto_corr_silence_diff:\t %u\n", + data->nrg_auto_corr_silence_diff); + pos += scnprintf(buf + pos, bufsz - pos, "num_in_cck_no_fa:\t\t %u\n", + data->num_in_cck_no_fa); + pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_ofdm:\t\t\t %u\n", + data->nrg_th_ofdm); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + + +static ssize_t iwl_dbgfs_chain_noise_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int pos = 0; + int cnt = 0; + char *buf; + int bufsz = sizeof(struct iwl_chain_noise_data) * 4 + 100; + ssize_t ret; + struct iwl_chain_noise_data *data; + + data = &priv->chain_noise_data; + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pos += scnprintf(buf + pos, bufsz - pos, "active_chains:\t\t\t %u\n", + data->active_chains); + pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_a:\t\t\t %u\n", + data->chain_noise_a); + pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_b:\t\t\t %u\n", + data->chain_noise_b); + pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_c:\t\t\t %u\n", + data->chain_noise_c); + pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_a:\t\t\t %u\n", + data->chain_signal_a); + pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_b:\t\t\t %u\n", + data->chain_signal_b); + pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_c:\t\t\t %u\n", + data->chain_signal_c); + pos += scnprintf(buf + pos, bufsz - pos, "beacon_count:\t\t\t %u\n", + data->beacon_count); + + pos += scnprintf(buf + pos, bufsz - pos, "disconn_array:\t\t\t"); + for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) { + pos += scnprintf(buf + pos, bufsz - pos, " %u", + data->disconn_array[cnt]); + } + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + pos += scnprintf(buf + pos, bufsz - pos, "delta_gain_code:\t\t"); + for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) { + pos += scnprintf(buf + pos, bufsz - pos, " %u", + data->delta_gain_code[cnt]); + } + pos += scnprintf(buf + pos, bufsz - pos, "\n"); + pos += scnprintf(buf + pos, bufsz - pos, "radio_write:\t\t\t %u\n", + data->radio_write); + pos += scnprintf(buf + pos, bufsz - pos, "state:\t\t\t\t %u\n", + data->state); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_power_save_status_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[60]; + int pos = 0; + const size_t bufsz = sizeof(buf); + u32 pwrsave_status; + + pwrsave_status = iwl_read32(priv->trans, CSR_GP_CNTRL) & + CSR_GP_REG_POWER_SAVE_STATUS_MSK; + + pos += scnprintf(buf + pos, bufsz - pos, "Power Save Status: "); + pos += scnprintf(buf + pos, bufsz - pos, "%s\n", + (pwrsave_status == CSR_GP_REG_NO_POWER_SAVE) ? "none" : + (pwrsave_status == CSR_GP_REG_MAC_POWER_SAVE) ? "MAC" : + (pwrsave_status == CSR_GP_REG_PHY_POWER_SAVE) ? "PHY" : + "error"); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_clear_ucode_statistics_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int clear; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &clear) != 1) + return -EFAULT; + + /* make request to uCode to retrieve statistics information */ + mutex_lock(&priv->mutex); + iwl_send_statistics_request(priv, CMD_SYNC, true); + mutex_unlock(&priv->mutex); + + return count; +} + +static ssize_t iwl_dbgfs_ucode_tracing_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int pos = 0; + char buf[128]; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "ucode trace timer is %s\n", + priv->event_log.ucode_trace ? "On" : "Off"); + pos += scnprintf(buf + pos, bufsz - pos, "non_wraps_count:\t\t %u\n", + priv->event_log.non_wraps_count); + pos += scnprintf(buf + pos, bufsz - pos, "wraps_once_count:\t\t %u\n", + priv->event_log.wraps_once_count); + pos += scnprintf(buf + pos, bufsz - pos, "wraps_more_count:\t\t %u\n", + priv->event_log.wraps_more_count); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_ucode_tracing_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int trace; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &trace) != 1) + return -EFAULT; + + if (trace) { + priv->event_log.ucode_trace = true; + if (iwl_is_alive(priv)) { + /* start collecting data now */ + mod_timer(&priv->ucode_trace, jiffies); + } + } else { + priv->event_log.ucode_trace = false; + del_timer_sync(&priv->ucode_trace); + } + + return count; +} + +static ssize_t iwl_dbgfs_rxon_flags_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int len = 0; + char buf[20]; + + len = sprintf(buf, "0x%04X\n", + le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.flags)); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t iwl_dbgfs_rxon_filter_flags_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int len = 0; + char buf[20]; + + len = sprintf(buf, "0x%04X\n", + le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags)); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t iwl_dbgfs_missed_beacon_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int pos = 0; + char buf[12]; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "%d\n", + priv->missed_beacon_threshold); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_missed_beacon_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int missed; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &missed) != 1) + return -EINVAL; + + if (missed < IWL_MISSED_BEACON_THRESHOLD_MIN || + missed > IWL_MISSED_BEACON_THRESHOLD_MAX) + priv->missed_beacon_threshold = + IWL_MISSED_BEACON_THRESHOLD_DEF; + else + priv->missed_beacon_threshold = missed; + + return count; +} + +static ssize_t iwl_dbgfs_plcp_delta_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int pos = 0; + char buf[12]; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "%u\n", + priv->plcp_delta_threshold); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int plcp; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &plcp) != 1) + return -EINVAL; + if ((plcp < IWL_MAX_PLCP_ERR_THRESHOLD_MIN) || + (plcp > IWL_MAX_PLCP_ERR_THRESHOLD_MAX)) + priv->plcp_delta_threshold = + IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE; + else + priv->plcp_delta_threshold = plcp; + return count; +} + +static ssize_t iwl_dbgfs_rf_reset_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char buf[300]; + const size_t bufsz = sizeof(buf); + struct iwl_rf_reset *rf_reset = &priv->rf_reset; + + pos += scnprintf(buf + pos, bufsz - pos, + "RF reset statistics\n"); + pos += scnprintf(buf + pos, bufsz - pos, + "\tnumber of reset request: %d\n", + rf_reset->reset_request_count); + pos += scnprintf(buf + pos, bufsz - pos, + "\tnumber of reset request success: %d\n", + rf_reset->reset_success_count); + pos += scnprintf(buf + pos, bufsz - pos, + "\tnumber of reset request reject: %d\n", + rf_reset->reset_reject_count); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_rf_reset_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + int ret; + + ret = iwl_force_rf_reset(priv, true); + return ret ? ret : count; +} + +static ssize_t iwl_dbgfs_txfifo_flush_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int flush; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &flush) != 1) + return -EINVAL; + + if (iwl_is_rfkill(priv)) + return -EFAULT; + + iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); + + return count; +} + +static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + int pos = 0; + char buf[200]; + const size_t bufsz = sizeof(buf); + + if (!priv->bt_enable_flag) { + pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n"); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); + } + pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n", + priv->bt_enable_flag); + pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n", + priv->bt_full_concurrent ? "full concurrency" : "3-wire"); + pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, " + "last traffic notif: %d\n", + priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load); + pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, " + "kill_ack_mask: %x, kill_cts_mask: %x\n", + priv->bt_ch_announce, priv->kill_ack_mask, + priv->kill_cts_mask); + + pos += scnprintf(buf + pos, bufsz - pos, "bluetooth traffic load: "); + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + pos += scnprintf(buf + pos, bufsz - pos, "Continuous\n"); + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + pos += scnprintf(buf + pos, bufsz - pos, "High\n"); + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + pos += scnprintf(buf + pos, bufsz - pos, "Low\n"); + break; + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + default: + pos += scnprintf(buf + pos, bufsz - pos, "None\n"); + break; + } + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_protection_mode_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + + int pos = 0; + char buf[40]; + const size_t bufsz = sizeof(buf); + + if (priv->cfg->ht_params) + pos += scnprintf(buf + pos, bufsz - pos, + "use %s for aggregation\n", + (priv->hw_params.use_rts_for_aggregation) ? + "rts/cts" : "cts-to-self"); + else + pos += scnprintf(buf + pos, bufsz - pos, "N/A"); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_protection_mode_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int rts; + + if (!priv->cfg->ht_params) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &rts) != 1) + return -EINVAL; + if (rts) + priv->hw_params.use_rts_for_aggregation = true; + else + priv->hw_params.use_rts_for_aggregation = false; + return count; +} + +static int iwl_cmd_echo_test(struct iwl_priv *priv) +{ + int ret; + struct iwl_host_cmd cmd = { + .id = REPLY_ECHO, + .len = { 0 }, + .flags = CMD_SYNC, + }; + + ret = iwl_dvm_send_cmd(priv, &cmd); + if (ret) + IWL_ERR(priv, "echo testing fail: 0X%x\n", ret); + else + IWL_DEBUG_INFO(priv, "echo testing pass\n"); + return ret; +} + +static ssize_t iwl_dbgfs_echo_test_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + iwl_cmd_echo_test(priv); + return count; +} + +#ifdef CONFIG_IWLWIFI_DEBUG +static ssize_t iwl_dbgfs_log_event_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char *buf; + int pos = 0; + ssize_t ret = -ENOMEM; + + ret = pos = iwl_dump_nic_event_log(priv, true, &buf, true); + if (buf) { + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + } + return ret; +} + +static ssize_t iwl_dbgfs_log_event_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + u32 event_log_flag; + char buf[8]; + int buf_size; + + /* check that the interface is up */ + if (!iwl_is_ready(priv)) + return -EAGAIN; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &event_log_flag) != 1) + return -EFAULT; + if (event_log_flag == 1) + iwl_dump_nic_event_log(priv, true, NULL, false); + + return count; +} +#endif + +static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[120]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, + "Sensitivity calibrations %s\n", + (priv->calib_disabled & + IWL_SENSITIVITY_CALIB_DISABLED) ? + "DISABLED" : "ENABLED"); + pos += scnprintf(buf + pos, bufsz - pos, + "Chain noise calibrations %s\n", + (priv->calib_disabled & + IWL_CHAIN_NOISE_CALIB_DISABLED) ? + "DISABLED" : "ENABLED"); + pos += scnprintf(buf + pos, bufsz - pos, + "Tx power calibrations %s\n", + (priv->calib_disabled & + IWL_TX_POWER_CALIB_DISABLED) ? + "DISABLED" : "ENABLED"); + + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + +static ssize_t iwl_dbgfs_calib_disabled_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + char buf[8]; + u32 calib_disabled; + int buf_size; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%x", &calib_disabled) != 1) + return -EFAULT; + + priv->calib_disabled = calib_disabled; + + return count; +} + +DEBUGFS_READ_FILE_OPS(ucode_rx_stats); +DEBUGFS_READ_FILE_OPS(ucode_tx_stats); +DEBUGFS_READ_FILE_OPS(ucode_general_stats); +DEBUGFS_READ_FILE_OPS(sensitivity); +DEBUGFS_READ_FILE_OPS(chain_noise); +DEBUGFS_READ_FILE_OPS(power_save_status); +DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics); +DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing); +DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon); +DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta); +DEBUGFS_READ_WRITE_FILE_OPS(rf_reset); +DEBUGFS_READ_FILE_OPS(rxon_flags); +DEBUGFS_READ_FILE_OPS(rxon_filter_flags); +DEBUGFS_WRITE_FILE_OPS(txfifo_flush); +DEBUGFS_READ_FILE_OPS(ucode_bt_stats); +DEBUGFS_READ_FILE_OPS(bt_traffic); +DEBUGFS_READ_WRITE_FILE_OPS(protection_mode); +DEBUGFS_READ_FILE_OPS(reply_tx_error); +DEBUGFS_WRITE_FILE_OPS(echo_test); +#ifdef CONFIG_IWLWIFI_DEBUG +DEBUGFS_READ_WRITE_FILE_OPS(log_event); +#endif +DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled); + +/* + * Create the debugfs files and directories + * + */ +int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) +{ + struct dentry *phyd = priv->hw->wiphy->debugfsdir; + struct dentry *dir_drv, *dir_data, *dir_rf, *dir_debug; + + dir_drv = debugfs_create_dir(name, phyd); + if (!dir_drv) + return -ENOMEM; + + priv->debugfs_dir = dir_drv; + + dir_data = debugfs_create_dir("data", dir_drv); + if (!dir_data) + goto err; + dir_rf = debugfs_create_dir("rf", dir_drv); + if (!dir_rf) + goto err; + dir_debug = debugfs_create_dir("debug", dir_drv); + if (!dir_debug) + goto err; + + DEBUGFS_ADD_FILE(nvm, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(sram, dir_data, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(wowlan_sram, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(stations, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(channels, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(status, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(rx_handlers, dir_data, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(qos, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(sleep_level_override, dir_data, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(thermal_throttling, dir_data, S_IRUSR); + DEBUGFS_ADD_FILE(disable_ht40, dir_data, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(temperature, dir_data, S_IRUSR); + + DEBUGFS_ADD_FILE(power_save_status, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(clear_ucode_statistics, dir_debug, S_IWUSR); + DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR); + DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(rf_reset, dir_debug, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(ucode_general_stats, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(txfifo_flush, dir_debug, S_IWUSR); + DEBUGFS_ADD_FILE(protection_mode, dir_debug, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR); + DEBUGFS_ADD_FILE(ucode_bt_stats, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(reply_tx_error, dir_debug, S_IRUSR); + DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR); + DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR); + DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR); +#ifdef CONFIG_IWLWIFI_DEBUG + DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR); +#endif + + if (iwl_advanced_bt_coexist(priv)) + DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR); + + /* Calibrations disabled/enabled status*/ + DEBUGFS_ADD_FILE(calib_disabled, dir_rf, S_IWUSR | S_IRUSR); + + if (iwl_trans_dbgfs_register(priv->trans, dir_debug)) + goto err; + return 0; + +err: + IWL_ERR(priv, "Can't create the debugfs directory\n"); + iwl_dbgfs_unregister(priv); + return -ENOMEM; +} + +/** + * Remove the debugfs files and directories + * + */ +void iwl_dbgfs_unregister(struct iwl_priv *priv) +{ + if (!priv->debugfs_dir) + return; + + debugfs_remove_recursive(priv->debugfs_dir); + priv->debugfs_dir = NULL; +} diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h new file mode 100644 index 00000000000..054f728f626 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/dev.h @@ -0,0 +1,917 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +/* + * Please use this file (dev.h) for driver implementation definitions. + * Please use commands.h for uCode API definitions. + */ + +#ifndef __iwl_dev_h__ +#define __iwl_dev_h__ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/slab.h> +#include <linux/mutex.h> + +#include "iwl-fw.h" +#include "iwl-eeprom-parse.h" +#include "iwl-csr.h" +#include "iwl-debug.h" +#include "iwl-agn-hw.h" +#include "iwl-op-mode.h" +#include "iwl-notif-wait.h" +#include "iwl-trans.h" + +#include "led.h" +#include "power.h" +#include "rs.h" +#include "tt.h" + +#include "iwl-test.h" + +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ +#define CT_KILL_THRESHOLD 114 /* in Celsius */ +#define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */ + +/* Default noise level to report when noise measurement is not available. + * This may be because we're: + * 1) Not associated no beacon statistics being sent to driver) + * 2) Scanning (noise measurement does not apply to associated channel) + * Use default noise value of -127 ... this is below the range of measurable + * Rx dBm for all agn devices, so it can indicate "unmeasurable" to user. + * Also, -127 works better than 0 when averaging frames with/without + * noise info (e.g. averaging might be done in app); measured dBm values are + * always negative ... using a negative value as the default keeps all + * averages within an s8's (used in some apps) range of negative values. */ +#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) + +/* + * RTS threshold here is total size [2347] minus 4 FCS bytes + * Per spec: + * a value of 0 means RTS on all data/management packets + * a value > max MSDU size means no RTS + * else RTS for data/management frames where MPDU is larger + * than RTS value. + */ +#define DEFAULT_RTS_THRESHOLD 2347U +#define MIN_RTS_THRESHOLD 0U +#define MAX_RTS_THRESHOLD 2347U +#define MAX_MSDU_SIZE 2304U +#define MAX_MPDU_SIZE 2346U +#define DEFAULT_BEACON_INTERVAL 200U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +#define IWL_NUM_SCAN_RATES (2) + + +#define IEEE80211_DATA_LEN 2304 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +#define IWL_SUPPORTED_RATES_IE_LEN 8 + +#define IWL_INVALID_RATE 0xFF +#define IWL_INVALID_VALUE -1 + +union iwl_ht_rate_supp { + u16 rates; + struct { + u8 siso_rate; + u8 mimo_rate; + }; +}; + +struct iwl_ht_config { + bool single_chain_sufficient; + enum ieee80211_smps_mode smps; /* current smps mode */ +}; + +/* QoS structures */ +struct iwl_qos_info { + int qos_active; + struct iwl_qosparam_cmd def_qos_parm; +}; + +/** + * enum iwl_agg_state + * + * The state machine of the BA agreement establishment / tear down. + * These states relate to a specific RA / TID. + * + * @IWL_AGG_OFF: aggregation is not used + * @IWL_AGG_STARTING: aggregation are starting (between start and oper) + * @IWL_AGG_ON: aggregation session is up + * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + */ +enum iwl_agg_state { + IWL_AGG_OFF = 0, + IWL_AGG_STARTING, + IWL_AGG_ON, + IWL_EMPTYING_HW_QUEUE_ADDBA, + IWL_EMPTYING_HW_QUEUE_DELBA, +}; + +/** + * struct iwl_ht_agg - aggregation state machine + + * This structs holds the states for the BA agreement establishment and tear + * down. It also holds the state during the BA session itself. This struct is + * duplicated for each RA / TID. + + * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the + * Tx response (REPLY_TX), and the block ack notification + * (REPLY_COMPRESSED_BA). + * @state: state of the BA agreement establishment / tear down. + * @txq_id: Tx queue used by the BA session + * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or + * the first packet to be sent in legacy HW queue in Tx AGG stop flow. + * Basically when next_reclaimed reaches ssn, we can tell mac80211 that + * we are ready to finish the Tx AGG stop / start flow. + * @wait_for_ba: Expect block-ack before next Tx reply + */ +struct iwl_ht_agg { + u32 rate_n_flags; + enum iwl_agg_state state; + u16 txq_id; + u16 ssn; + bool wait_for_ba; +}; + +/** + * struct iwl_tid_data - one for each RA / TID + + * This structs holds the states for each RA / TID. + + * @seq_number: the next WiFi sequence number to use + * @next_reclaimed: the WiFi sequence number of the next packet to be acked. + * This is basically (last acked packet++). + * @agg: aggregation state machine + */ +struct iwl_tid_data { + u16 seq_number; + u16 next_reclaimed; + struct iwl_ht_agg agg; +}; + +/* + * Structure should be accessed with sta_lock held. When station addition + * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only + * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock + * held. + */ +struct iwl_station_entry { + struct iwl_addsta_cmd sta; + u8 used, ctxid; + struct iwl_link_quality_cmd *lq; +}; + +/* + * iwl_station_priv: Driver's private station information + * + * When mac80211 creates a station it reserves some space (hw->sta_data_size) + * in the structure for use by driver. This structure is places in that + * space. + */ +struct iwl_station_priv { + struct iwl_rxon_context *ctx; + struct iwl_lq_sta lq_sta; + atomic_t pending_frames; + bool client; + bool asleep; + u8 max_agg_bufsize; + u8 sta_id; +}; + +/** + * struct iwl_vif_priv - driver's private per-interface information + * + * When mac80211 allocates a virtual interface, it can allocate + * space for us to put data into. + */ +struct iwl_vif_priv { + struct iwl_rxon_context *ctx; + u8 ibss_bssid_sta_id; +}; + +struct iwl_sensitivity_ranges { + u16 min_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + + +#define KELVIN_TO_CELSIUS(x) ((x)-273) +#define CELSIUS_TO_KELVIN(x) ((x)+273) + + +/****************************************************************************** + * + * Functions implemented in core module which are forward declared here + * for use by iwl-[4-5].c + * + * NOTE: The implementation of these functions are not hardware specific + * which is why they are in the core module files. + * + * Naming convention -- + * iwl_ <-- Is part of iwlwifi + * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) + * + ****************************************************************************/ +extern void iwl_update_chain_flags(struct iwl_priv *priv); +extern const u8 iwl_bcast_addr[ETH_ALEN]; + +#define IWL_OPERATION_MODE_AUTO 0 +#define IWL_OPERATION_MODE_HT_ONLY 1 +#define IWL_OPERATION_MODE_MIXED 2 +#define IWL_OPERATION_MODE_20MHZ 3 + +#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 + +/* Sensitivity and chain noise calibration */ +#define INITIALIZATION_VALUE 0xFFFF +#define IWL_CAL_NUM_BEACONS 16 +#define MAXIMUM_ALLOWED_PATHLOSS 15 + +#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 + +#define MAX_FA_OFDM 50 +#define MIN_FA_OFDM 5 +#define MAX_FA_CCK 50 +#define MIN_FA_CCK 5 + +#define AUTO_CORR_STEP_OFDM 1 + +#define AUTO_CORR_STEP_CCK 3 +#define AUTO_CORR_MAX_TH_CCK 160 + +#define NRG_DIFF 2 +#define NRG_STEP_CCK 2 +#define NRG_MARGIN 8 +#define MAX_NUMBER_CCK_NO_FA 100 + +#define AUTO_CORR_CCK_MIN_VAL_DEF (125) + +#define CHAIN_A 0 +#define CHAIN_B 1 +#define CHAIN_C 2 +#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 +#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF +#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF + +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + +enum iwlagn_false_alarm_state { + IWL_FA_TOO_MANY = 0, + IWL_FA_TOO_FEW = 1, + IWL_FA_GOOD_RANGE = 2, +}; + +enum iwlagn_chain_noise_state { + IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ + IWL_CHAIN_NOISE_ACCUMULATE, + IWL_CHAIN_NOISE_CALIBRATED, + IWL_CHAIN_NOISE_DONE, +}; + +/* Sensitivity calib data */ +struct iwl_sensitivity_data { + u32 auto_corr_ofdm; + u32 auto_corr_ofdm_mrc; + u32 auto_corr_ofdm_x1; + u32 auto_corr_ofdm_mrc_x1; + u32 auto_corr_cck; + u32 auto_corr_cck_mrc; + + u32 last_bad_plcp_cnt_ofdm; + u32 last_fa_cnt_ofdm; + u32 last_bad_plcp_cnt_cck; + u32 last_fa_cnt_cck; + + u32 nrg_curr_state; + u32 nrg_prev_state; + u32 nrg_value[10]; + u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; + u32 nrg_silence_ref; + u32 nrg_energy_idx; + u32 nrg_silence_idx; + u32 nrg_th_cck; + s32 nrg_auto_corr_silence_diff; + u32 num_in_cck_no_fa; + u32 nrg_th_ofdm; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + +/* Chain noise (differential Rx gain) calib data */ +struct iwl_chain_noise_data { + u32 active_chains; + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_signal_a; + u32 chain_signal_b; + u32 chain_signal_c; + u16 beacon_count; + u8 disconn_array[NUM_RX_CHAINS]; + u8 delta_gain_code[NUM_RX_CHAINS]; + u8 radio_write; + u8 state; +}; + +enum { + MEASUREMENT_READY = (1 << 0), + MEASUREMENT_ACTIVE = (1 << 1), +}; + +/* reply_tx_statistics (for _agn devices) */ +struct reply_tx_error_statistics { + u32 pp_delay; + u32 pp_few_bytes; + u32 pp_bt_prio; + u32 pp_quiet_period; + u32 pp_calc_ttak; + u32 int_crossed_retry; + u32 short_limit; + u32 long_limit; + u32 fifo_underrun; + u32 drain_flow; + u32 rfkill_flush; + u32 life_expire; + u32 dest_ps; + u32 host_abort; + u32 bt_retry; + u32 sta_invalid; + u32 frag_drop; + u32 tid_disable; + u32 fifo_flush; + u32 insuff_cf_poll; + u32 fail_hw_drop; + u32 sta_color_mismatch; + u32 unknown; +}; + +/* reply_agg_tx_statistics (for _agn devices) */ +struct reply_agg_tx_error_statistics { + u32 underrun; + u32 bt_prio; + u32 few_bytes; + u32 abort; + u32 last_sent_ttl; + u32 last_sent_try; + u32 last_sent_bt_kill; + u32 scd_query; + u32 bad_crc32; + u32 response; + u32 dump_tx; + u32 delay_tx; + u32 unknown; +}; + +/* + * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds + * to perform continuous uCode event logging operation if enabled + */ +#define UCODE_TRACE_PERIOD (10) + +/* + * iwl_event_log: current uCode event log position + * + * @ucode_trace: enable/disable ucode continuous trace timer + * @num_wraps: how many times the event buffer wraps + * @next_entry: the entry just before the next one that uCode would fill + * @non_wraps_count: counter for no wrap detected when dump ucode events + * @wraps_once_count: counter for wrap once detected when dump ucode events + * @wraps_more_count: counter for wrap more than once detected + * when dump ucode events + */ +struct iwl_event_log { + bool ucode_trace; + u32 num_wraps; + u32 next_entry; + int non_wraps_count; + int wraps_once_count; + int wraps_more_count; +}; + +#define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3) + +/* BT Antenna Coupling Threshold (dB) */ +#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35) + +/* Firmware reload counter and Timestamp */ +#define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */ +#define IWL_MAX_CONTINUE_RELOAD_CNT 4 + + +struct iwl_rf_reset { + int reset_request_count; + int reset_success_count; + int reset_reject_count; + unsigned long last_reset_jiffies; +}; + +enum iwl_rxon_context_id { + IWL_RXON_CTX_BSS, + IWL_RXON_CTX_PAN, + + NUM_IWL_RXON_CTX +}; + +/* extend beacon time format bit shifting */ +/* + * for _agn devices + * bits 31:22 - extended + * bits 21:0 - interval + */ +#define IWLAGN_EXT_BEACON_TIME_POS 22 + +struct iwl_rxon_context { + struct ieee80211_vif *vif; + + u8 mcast_queue; + u8 ac_to_queue[IEEE80211_NUM_ACS]; + u8 ac_to_fifo[IEEE80211_NUM_ACS]; + + /* + * We could use the vif to indicate active, but we + * also need it to be active during disabling when + * we already removed the vif for type setting. + */ + bool always_active, is_active; + + bool ht_need_multiple_chains; + + enum iwl_rxon_context_id ctxid; + + u32 interface_modes, exclusive_interface_modes; + u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype; + + /* + * We declare this const so it can only be + * changed via explicit cast within the + * routines that actually update the physical + * hardware. + */ + const struct iwl_rxon_cmd active; + struct iwl_rxon_cmd staging; + + struct iwl_rxon_time_cmd timing; + + struct iwl_qos_info qos_data; + + u8 bcast_sta_id, ap_sta_id; + + u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd; + u8 qos_cmd; + u8 wep_key_cmd; + + struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; + u8 key_mapping_keys; + + __le32 station_flags; + + int beacon_int; + + struct { + bool non_gf_sta_present; + u8 protection; + bool enabled, is_40mhz; + u8 extension_chan_offset; + } ht; +}; + +enum iwl_scan_type { + IWL_SCAN_NORMAL, + IWL_SCAN_RADIO_RESET, + IWL_SCAN_ROC, +}; + +/** + * struct iwl_hw_params + * + * Holds the module parameters + * + * @tx_chains_num: Number of TX chains + * @rx_chains_num: Number of RX chains + * @ct_kill_threshold: temperature threshold - in hw dependent unit + * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit + * relevant for 1000, 6000 and up + * @struct iwl_sensitivity_ranges: range of sensitivity values + * @use_rts_for_aggregation: use rts/cts protection for HT traffic + */ +struct iwl_hw_params { + u8 tx_chains_num; + u8 rx_chains_num; + bool use_rts_for_aggregation; + u32 ct_kill_threshold; + u32 ct_kill_exit_threshold; + + const struct iwl_sensitivity_ranges *sens; +}; + +struct iwl_lib_ops { + /* set hw dependent parameters */ + void (*set_hw_params)(struct iwl_priv *priv); + int (*set_channel_switch)(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch); + /* device specific configuration */ + void (*nic_config)(struct iwl_priv *priv); + + /* temperature */ + void (*temperature)(struct iwl_priv *priv); +}; + +struct iwl_wipan_noa_data { + struct rcu_head rcu_head; + u32 length; + u8 data[]; +}; + +/* Calibration disabling bit mask */ +enum { + IWL_CALIB_ENABLE_ALL = 0, + + IWL_SENSITIVITY_CALIB_DISABLED = BIT(0), + IWL_CHAIN_NOISE_CALIB_DISABLED = BIT(1), + IWL_TX_POWER_CALIB_DISABLED = BIT(2), + + IWL_CALIB_DISABLE_ALL = 0xFFFFFFFF, +}; + +#define IWL_OP_MODE_GET_DVM(_iwl_op_mode) \ + ((struct iwl_priv *) ((_iwl_op_mode)->op_mode_specific)) + +#define IWL_MAC80211_GET_DVM(_hw) \ + ((struct iwl_priv *) ((struct iwl_op_mode *) \ + (_hw)->priv)->op_mode_specific) + +struct iwl_priv { + + struct iwl_trans *trans; + struct device *dev; /* for debug prints only */ + const struct iwl_cfg *cfg; + const struct iwl_fw *fw; + const struct iwl_lib_ops *lib; + unsigned long status; + + spinlock_t sta_lock; + struct mutex mutex; + + unsigned long transport_queue_stop; + bool passive_no_rx; +#define IWL_INVALID_MAC80211_QUEUE 0xff + u8 queue_to_mac80211[IWL_MAX_HW_QUEUES]; + atomic_t queue_stop_count[IWL_MAX_HW_QUEUES]; + + unsigned long agg_q_alloc[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; + + /* ieee device used by generic ieee processing code */ + struct ieee80211_hw *hw; + + struct list_head calib_results; + + struct workqueue_struct *workqueue; + + struct iwl_hw_params hw_params; + + enum ieee80211_band band; + u8 valid_contexts; + + int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + + struct iwl_notif_wait_data notif_wait; + + /* spectrum measurement report caching */ + struct iwl_spectrum_notification measure_report; + u8 measurement_status; + +#define IWL_OWNERSHIP_DRIVER 0 +#define IWL_OWNERSHIP_TM 1 + u8 ucode_owner; + + /* ucode beacon time */ + u32 ucode_beacon_time; + int missed_beacon_threshold; + + /* track IBSS manager (last beacon) status */ + u32 ibss_manager; + + /* jiffies when last recovery from statistics was performed */ + unsigned long rx_statistics_jiffies; + + /*counters */ + u32 rx_handlers_stats[REPLY_MAX]; + + /* rf reset */ + struct iwl_rf_reset rf_reset; + + /* firmware reload counter and timestamp */ + unsigned long reload_jiffies; + int reload_count; + bool ucode_loaded; + bool init_ucode_run; /* Don't run init uCode again */ + + u8 plcp_delta_threshold; + + /* thermal calibration */ + s32 temperature; /* Celsius */ + s32 last_temperature; + + struct iwl_wipan_noa_data __rcu *noa_data; + + /* Scan related variables */ + unsigned long scan_start; + unsigned long scan_start_tsf; + void *scan_cmd; + enum ieee80211_band scan_band; + struct cfg80211_scan_request *scan_request; + struct ieee80211_vif *scan_vif; + enum iwl_scan_type scan_type; + u8 scan_tx_ant[IEEE80211_NUM_BANDS]; + u8 mgmt_tx_ant; + + /* max number of station keys */ + u8 sta_key_max_num; + + bool new_scan_threshold_behaviour; + + bool wowlan; + + /* EEPROM MAC addresses */ + struct mac_address addresses[2]; + + struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; + + __le16 switch_channel; + + u8 start_calib; + struct iwl_sensitivity_data sensitivity_data; + struct iwl_chain_noise_data chain_noise_data; + __le16 sensitivity_tbl[HD_TABLE_SIZE]; + __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES]; + + struct iwl_ht_config current_ht_config; + + /* Rate scaling data */ + u8 retry_rate; + + int activity_timer_active; + + struct iwl_power_mgr power_data; + struct iwl_tt_mgmt thermal_throttle; + + /* station table variables */ + int num_stations; + struct iwl_station_entry stations[IWLAGN_STATION_COUNT]; + unsigned long ucode_key_table; + struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT]; + atomic_t num_aux_in_flight; + + u8 mac80211_registered; + + /* Indication if ieee80211_ops->open has been called */ + u8 is_open; + + enum nl80211_iftype iw_mode; + + /* Last Rx'd beacon timestamp */ + u64 timestamp; + + struct { + __le32 flag; + struct statistics_general_common common; + struct statistics_rx_non_phy rx_non_phy; + struct statistics_rx_phy rx_ofdm; + struct statistics_rx_ht_phy rx_ofdm_ht; + struct statistics_rx_phy rx_cck; + struct statistics_tx tx; +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct statistics_bt_activity bt_activity; + __le32 num_bt_kills, accum_num_bt_kills; +#endif + spinlock_t lock; + } statistics; +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct { + struct statistics_general_common common; + struct statistics_rx_non_phy rx_non_phy; + struct statistics_rx_phy rx_ofdm; + struct statistics_rx_ht_phy rx_ofdm_ht; + struct statistics_rx_phy rx_cck; + struct statistics_tx tx; + struct statistics_bt_activity bt_activity; + } accum_stats, delta_stats, max_delta_stats; +#endif + + /* + * reporting the number of tids has AGG on. 0 means + * no AGGREGATION + */ + u8 agg_tids_count; + + struct iwl_rx_phy_res last_phy_res; + bool last_phy_res_valid; + + /* + * chain noise reset and gain commands are the + * two extra calibration commands follows the standard + * phy calibration commands + */ + u8 phy_calib_chain_noise_reset_cmd; + u8 phy_calib_chain_noise_gain_cmd; + + /* counts reply_tx error */ + struct reply_tx_error_statistics reply_tx_stats; + struct reply_agg_tx_error_statistics reply_agg_tx_stats; + + /* remain-on-channel offload support */ + struct ieee80211_channel *hw_roc_channel; + struct delayed_work hw_roc_disable_work; + enum nl80211_channel_type hw_roc_chantype; + int hw_roc_duration; + bool hw_roc_setup, hw_roc_start_notified; + + /* bt coex */ + u8 bt_enable_flag; + u8 bt_status; + u8 bt_traffic_load, last_bt_traffic_load; + bool bt_ch_announce; + bool bt_full_concurrent; + bool bt_ant_couple_ok; + __le32 kill_ack_mask; + __le32 kill_cts_mask; + __le16 bt_valid; + bool reduced_txpower; + u16 bt_on_thresh; + u16 bt_duration; + u16 dynamic_frag_thresh; + u8 bt_ci_compliance; + struct work_struct bt_traffic_change_work; + bool bt_enable_pspoll; + struct iwl_rxon_context *cur_rssi_ctx; + bool bt_is_sco; + + struct work_struct restart; + struct work_struct scan_completed; + struct work_struct abort_scan; + + struct work_struct beacon_update; + struct iwl_rxon_context *beacon_ctx; + struct sk_buff *beacon_skb; + void *beacon_cmd; + + struct work_struct tt_work; + struct work_struct ct_enter; + struct work_struct ct_exit; + struct work_struct start_internal_scan; + struct work_struct tx_flush; + struct work_struct bt_full_concurrency; + struct work_struct bt_runtime_config; + + struct delayed_work scan_check; + + /* TX Power settings */ + s8 tx_power_user_lmt; + s8 tx_power_next; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + /* debugfs */ + struct dentry *debugfs_dir; + u32 dbgfs_sram_offset, dbgfs_sram_len; + bool disable_ht40; + void *wowlan_sram; +#endif /* CONFIG_IWLWIFI_DEBUGFS */ + + struct iwl_eeprom_data *eeprom_data; + /* eeprom blob for debugfs/testmode */ + u8 *eeprom_blob; + size_t eeprom_blob_size; + + struct work_struct txpower_work; + u32 calib_disabled; + struct work_struct run_time_calib_work; + struct timer_list statistics_periodic; + struct timer_list ucode_trace; + + struct iwl_event_log event_log; + + struct led_classdev led; + unsigned long blink_on, blink_off; + bool led_registered; + +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + struct iwl_test tst; + u32 tm_fixed_rate; +#endif + + /* WoWLAN GTK rekey data */ + u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN]; + __le64 replay_ctr; + __le16 last_seq_ctl; + bool have_rekey_data; + + /* device_pointers: pointers to ucode event tables */ + struct { + u32 error_event_table; + u32 log_event_table; + } device_pointers; + + /* indicator of loaded ucode image */ + enum iwl_ucode_type cur_ucode; +}; /*iwl_priv */ + +static inline struct iwl_rxon_context * +iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + return vif_priv->ctx; +} + +#define for_each_context(priv, ctx) \ + for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \ + ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \ + if (priv->valid_contexts & BIT(ctx->ctxid)) + +static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx) +{ + return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; +} + +static inline int iwl_is_associated(struct iwl_priv *priv, + enum iwl_rxon_context_id ctxid) +{ + return iwl_is_associated_ctx(&priv->contexts[ctxid]); +} + +static inline int iwl_is_any_associated(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + for_each_context(priv, ctx) + if (iwl_is_associated_ctx(ctx)) + return true; + return false; +} + +#endif /* __iwl_dev_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c new file mode 100644 index 00000000000..349c205d5f6 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -0,0 +1,588 @@ +/****************************************************************************** + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +/* + * DVM device-specific data & functions + */ +#include "iwl-io.h" +#include "iwl-prph.h" +#include "iwl-eeprom-parse.h" + +#include "agn.h" +#include "dev.h" +#include "commands.h" + + +/* + * 1000 series + * =========== + */ + +/* + * For 1000, use advance thermal throttling critical temperature threshold, + * but legacy thermal management implementation for now. + * This is for the reason of 1000 uCode using advance thermal throttling API + * but not implement ct_kill_exit based on ct_kill exit temperature + * so the thermal throttling will still based on legacy thermal throttling + * management. + * The code here need to be modified once 1000 uCode has the advanced thermal + * throttling algorithm in place + */ +static void iwl1000_set_ct_threshold(struct iwl_priv *priv) +{ + /* want Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; + priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; +} + +/* NIC configuration for 1000 series */ +static void iwl1000_nic_config(struct iwl_priv *priv) +{ + /* Setting digital SVR for 1000 card to 1.32V */ + /* locking is acquired in iwl_set_bits_mask_prph() function */ + iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG, + APMG_SVR_DIGITAL_VOLTAGE_1_32, + ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK); +} + +/** + * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time + * @priv -- pointer to iwl_priv data structure + * @tsf_bits -- number of bits need to shift for masking) + */ +static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv, + u16 tsf_bits) +{ + return (1 << tsf_bits) - 1; +} + +/** + * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time + * @priv -- pointer to iwl_priv data structure + * @tsf_bits -- number of bits need to shift for masking) + */ +static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv, + u16 tsf_bits) +{ + return ((1 << (32 - tsf_bits)) - 1) << tsf_bits; +} + +/* + * extended beacon time format + * time in usec will be changed into a 32-bit value in extended:internal format + * the extended part is the beacon counts + * the internal part is the time in usec within one beacon interval + */ +static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, + u32 beacon_interval) +{ + u32 quot; + u32 rem; + u32 interval = beacon_interval * TIME_UNIT; + + if (!interval || !usec) + return 0; + + quot = (usec / interval) & + (iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >> + IWLAGN_EXT_BEACON_TIME_POS); + rem = (usec % interval) & iwl_beacon_time_mask_low(priv, + IWLAGN_EXT_BEACON_TIME_POS); + + return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem; +} + +/* base is usually what we get from ucode with each received frame, + * the same as HW timer counter counting down + */ +static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, + u32 addon, u32 beacon_interval) +{ + u32 base_low = base & iwl_beacon_time_mask_low(priv, + IWLAGN_EXT_BEACON_TIME_POS); + u32 addon_low = addon & iwl_beacon_time_mask_low(priv, + IWLAGN_EXT_BEACON_TIME_POS); + u32 interval = beacon_interval * TIME_UNIT; + u32 res = (base & iwl_beacon_time_mask_high(priv, + IWLAGN_EXT_BEACON_TIME_POS)) + + (addon & iwl_beacon_time_mask_high(priv, + IWLAGN_EXT_BEACON_TIME_POS)); + + if (base_low > addon_low) + res += base_low - addon_low; + else if (base_low < addon_low) { + res += interval + base_low - addon_low; + res += (1 << IWLAGN_EXT_BEACON_TIME_POS); + } else + res += (1 << IWLAGN_EXT_BEACON_TIME_POS); + + return cpu_to_le32(res); +} + +static const struct iwl_sensitivity_ranges iwl1000_sensitivity = { + .min_nrg_cck = 95, + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 120, + .auto_corr_min_ofdm_mrc_x1 = 240, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 155, + .auto_corr_max_ofdm_mrc_x1 = 290, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 170, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 95, + .nrg_th_ofdm = 95, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +static void iwl1000_hw_set_hw_params(struct iwl_priv *priv) +{ + iwl1000_set_ct_threshold(priv); + + /* Set initial sensitivity parameters */ + priv->hw_params.sens = &iwl1000_sensitivity; +} + +struct iwl_lib_ops iwl1000_lib = { + .set_hw_params = iwl1000_hw_set_hw_params, + .nic_config = iwl1000_nic_config, + .temperature = iwlagn_temperature, +}; + + +/* + * 2000 series + * =========== + */ + +static void iwl2000_set_ct_threshold(struct iwl_priv *priv) +{ + /* want Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; + priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; +} + +/* NIC configuration for 2000 series */ +static void iwl2000_nic_config(struct iwl_priv *priv) +{ + iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, + CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER); +} + +static const struct iwl_sensitivity_ranges iwl2000_sensitivity = { + .min_nrg_cck = 97, + .auto_corr_min_ofdm = 80, + .auto_corr_min_ofdm_mrc = 128, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 192, + + .auto_corr_max_ofdm = 145, + .auto_corr_max_ofdm_mrc = 232, + .auto_corr_max_ofdm_x1 = 110, + .auto_corr_max_ofdm_mrc_x1 = 232, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 175, + .auto_corr_min_cck_mrc = 160, + .auto_corr_max_cck_mrc = 310, + .nrg_th_cck = 97, + .nrg_th_ofdm = 100, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +static void iwl2000_hw_set_hw_params(struct iwl_priv *priv) +{ + iwl2000_set_ct_threshold(priv); + + /* Set initial sensitivity parameters */ + priv->hw_params.sens = &iwl2000_sensitivity; +} + +struct iwl_lib_ops iwl2000_lib = { + .set_hw_params = iwl2000_hw_set_hw_params, + .nic_config = iwl2000_nic_config, + .temperature = iwlagn_temperature, +}; + +struct iwl_lib_ops iwl2030_lib = { + .set_hw_params = iwl2000_hw_set_hw_params, + .nic_config = iwl2000_nic_config, + .temperature = iwlagn_temperature, +}; + +/* + * 5000 series + * =========== + */ + +/* NIC configuration for 5000 series */ +static const struct iwl_sensitivity_ranges iwl5000_sensitivity = { + .min_nrg_cck = 100, + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 120, + .auto_corr_max_ofdm_mrc_x1 = 240, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 200, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 100, + .nrg_th_ofdm = 100, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +static struct iwl_sensitivity_ranges iwl5150_sensitivity = { + .min_nrg_cck = 95, + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + /* max = min for performance bug in 5150 DSP */ + .auto_corr_max_ofdm_x1 = 105, + .auto_corr_max_ofdm_mrc_x1 = 220, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 170, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 95, + .nrg_th_ofdm = 95, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF (-5) + +static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv) +{ + u16 temperature, voltage; + + temperature = le16_to_cpu(priv->eeprom_data->kelvin_temperature); + voltage = le16_to_cpu(priv->eeprom_data->kelvin_voltage); + + /* offset = temp - volt / coeff */ + return (s32)(temperature - + voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); +} + +static void iwl5150_set_ct_threshold(struct iwl_priv *priv) +{ + const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF; + s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) - + iwl_temp_calib_to_offset(priv); + + priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef; +} + +static void iwl5000_set_ct_threshold(struct iwl_priv *priv) +{ + /* want Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; +} + +static void iwl5000_hw_set_hw_params(struct iwl_priv *priv) +{ + iwl5000_set_ct_threshold(priv); + + /* Set initial sensitivity parameters */ + priv->hw_params.sens = &iwl5000_sensitivity; +} + +static void iwl5150_hw_set_hw_params(struct iwl_priv *priv) +{ + iwl5150_set_ct_threshold(priv); + + /* Set initial sensitivity parameters */ + priv->hw_params.sens = &iwl5150_sensitivity; +} + +static void iwl5150_temperature(struct iwl_priv *priv) +{ + u32 vt = 0; + s32 offset = iwl_temp_calib_to_offset(priv); + + vt = le32_to_cpu(priv->statistics.common.temperature); + vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset; + /* now vt hold the temperature in Kelvin */ + priv->temperature = KELVIN_TO_CELSIUS(vt); + iwl_tt_handler(priv); +} + +static int iwl5000_hw_channel_switch(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch) +{ + /* + * MULTI-FIXME + * See iwlagn_mac_channel_switch. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwl5000_channel_switch_cmd cmd; + u32 switch_time_in_usec, ucode_switch_time; + u16 ch; + u32 tsf_low; + u8 switch_count; + u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); + struct ieee80211_vif *vif = ctx->vif; + struct iwl_host_cmd hcmd = { + .id = REPLY_CHANNEL_SWITCH, + .len = { sizeof(cmd), }, + .flags = CMD_SYNC, + .data = { &cmd, }, + }; + + cmd.band = priv->band == IEEE80211_BAND_2GHZ; + ch = ch_switch->channel->hw_value; + IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", + ctx->active.channel, ch); + cmd.channel = cpu_to_le16(ch); + cmd.rxon_flags = ctx->staging.flags; + cmd.rxon_filter_flags = ctx->staging.filter_flags; + switch_count = ch_switch->count; + tsf_low = ch_switch->timestamp & 0x0ffffffff; + /* + * calculate the ucode channel switch time + * adding TSF as one of the factor for when to switch + */ + if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { + if (switch_count > ((priv->ucode_beacon_time - tsf_low) / + beacon_interval)) { + switch_count -= (priv->ucode_beacon_time - + tsf_low) / beacon_interval; + } else + switch_count = 0; + } + if (switch_count <= 1) + cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + else { + switch_time_in_usec = + vif->bss_conf.beacon_int * switch_count * TIME_UNIT; + ucode_switch_time = iwl_usecs_to_beacons(priv, + switch_time_in_usec, + beacon_interval); + cmd.switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); + } + IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", + cmd.switch_time); + cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + + return iwl_dvm_send_cmd(priv, &hcmd); +} + +struct iwl_lib_ops iwl5000_lib = { + .set_hw_params = iwl5000_hw_set_hw_params, + .set_channel_switch = iwl5000_hw_channel_switch, + .temperature = iwlagn_temperature, +}; + +struct iwl_lib_ops iwl5150_lib = { + .set_hw_params = iwl5150_hw_set_hw_params, + .set_channel_switch = iwl5000_hw_channel_switch, + .temperature = iwl5150_temperature, +}; + + + +/* + * 6000 series + * =========== + */ + +static void iwl6000_set_ct_threshold(struct iwl_priv *priv) +{ + /* want Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; + priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; +} + +/* NIC configuration for 6000 series */ +static void iwl6000_nic_config(struct iwl_priv *priv) +{ + switch (priv->cfg->device_family) { + case IWL_DEVICE_FAMILY_6005: + case IWL_DEVICE_FAMILY_6030: + case IWL_DEVICE_FAMILY_6000: + break; + case IWL_DEVICE_FAMILY_6000i: + /* 2x2 IPA phy type */ + iwl_write32(priv->trans, CSR_GP_DRIVER_REG, + CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); + break; + case IWL_DEVICE_FAMILY_6050: + /* Indicate calibration version to uCode. */ + if (priv->eeprom_data->calib_version >= 6) + iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, + CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); + break; + case IWL_DEVICE_FAMILY_6150: + /* Indicate calibration version to uCode. */ + if (priv->eeprom_data->calib_version >= 6) + iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, + CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); + iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG, + CSR_GP_DRIVER_REG_BIT_6050_1x2); + break; + default: + WARN_ON(1); + } +} + +static const struct iwl_sensitivity_ranges iwl6000_sensitivity = { + .min_nrg_cck = 110, + .auto_corr_min_ofdm = 80, + .auto_corr_min_ofdm_mrc = 128, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 192, + + .auto_corr_max_ofdm = 145, + .auto_corr_max_ofdm_mrc = 232, + .auto_corr_max_ofdm_x1 = 110, + .auto_corr_max_ofdm_mrc_x1 = 232, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 175, + .auto_corr_min_cck_mrc = 160, + .auto_corr_max_cck_mrc = 310, + .nrg_th_cck = 110, + .nrg_th_ofdm = 110, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 336, + .nrg_th_cca = 62, +}; + +static void iwl6000_hw_set_hw_params(struct iwl_priv *priv) +{ + iwl6000_set_ct_threshold(priv); + + /* Set initial sensitivity parameters */ + priv->hw_params.sens = &iwl6000_sensitivity; + +} + +static int iwl6000_hw_channel_switch(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch) +{ + /* + * MULTI-FIXME + * See iwlagn_mac_channel_switch. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwl6000_channel_switch_cmd cmd; + u32 switch_time_in_usec, ucode_switch_time; + u16 ch; + u32 tsf_low; + u8 switch_count; + u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); + struct ieee80211_vif *vif = ctx->vif; + struct iwl_host_cmd hcmd = { + .id = REPLY_CHANNEL_SWITCH, + .len = { sizeof(cmd), }, + .flags = CMD_SYNC, + .data = { &cmd, }, + }; + + cmd.band = priv->band == IEEE80211_BAND_2GHZ; + ch = ch_switch->channel->hw_value; + IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", + ctx->active.channel, ch); + cmd.channel = cpu_to_le16(ch); + cmd.rxon_flags = ctx->staging.flags; + cmd.rxon_filter_flags = ctx->staging.filter_flags; + switch_count = ch_switch->count; + tsf_low = ch_switch->timestamp & 0x0ffffffff; + /* + * calculate the ucode channel switch time + * adding TSF as one of the factor for when to switch + */ + if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { + if (switch_count > ((priv->ucode_beacon_time - tsf_low) / + beacon_interval)) { + switch_count -= (priv->ucode_beacon_time - + tsf_low) / beacon_interval; + } else + switch_count = 0; + } + if (switch_count <= 1) + cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + else { + switch_time_in_usec = + vif->bss_conf.beacon_int * switch_count * TIME_UNIT; + ucode_switch_time = iwl_usecs_to_beacons(priv, + switch_time_in_usec, + beacon_interval); + cmd.switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); + } + IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", + cmd.switch_time); + cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + + return iwl_dvm_send_cmd(priv, &hcmd); +} + +struct iwl_lib_ops iwl6000_lib = { + .set_hw_params = iwl6000_hw_set_hw_params, + .set_channel_switch = iwl6000_hw_channel_switch, + .nic_config = iwl6000_nic_config, + .temperature = iwlagn_temperature, +}; + +struct iwl_lib_ops iwl6030_lib = { + .set_hw_params = iwl6000_hw_set_hw_params, + .set_channel_switch = iwl6000_hw_channel_switch, + .nic_config = iwl6000_nic_config, + .temperature = iwlagn_temperature, +}; diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c new file mode 100644 index 00000000000..bf479f70909 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/led.c @@ -0,0 +1,224 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <net/mac80211.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> +#include "iwl-io.h" +#include "iwl-trans.h" +#include "iwl-modparams.h" +#include "dev.h" +#include "agn.h" + +/* Throughput OFF time(ms) ON time (ms) + * >300 25 25 + * >200 to 300 40 40 + * >100 to 200 55 55 + * >70 to 100 65 65 + * >50 to 70 75 75 + * >20 to 50 85 85 + * >10 to 20 95 95 + * >5 to 10 110 110 + * >1 to 5 130 130 + * >0 to 1 167 167 + * <=0 SOLID ON + */ +static const struct ieee80211_tpt_blink iwl_blink[] = { + { .throughput = 0, .blink_time = 334 }, + { .throughput = 1 * 1024 - 1, .blink_time = 260 }, + { .throughput = 5 * 1024 - 1, .blink_time = 220 }, + { .throughput = 10 * 1024 - 1, .blink_time = 190 }, + { .throughput = 20 * 1024 - 1, .blink_time = 170 }, + { .throughput = 50 * 1024 - 1, .blink_time = 150 }, + { .throughput = 70 * 1024 - 1, .blink_time = 130 }, + { .throughput = 100 * 1024 - 1, .blink_time = 110 }, + { .throughput = 200 * 1024 - 1, .blink_time = 80 }, + { .throughput = 300 * 1024 - 1, .blink_time = 50 }, +}; + +/* Set led register off */ +void iwlagn_led_enable(struct iwl_priv *priv) +{ + iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TRUN_ON); +} + +/* + * Adjust led blink rate to compensate on a MAC Clock difference on every HW + * Led blink rate analysis showed an average deviation of 20% on 5000 series + * and up. + * Need to compensate on the led on/off time per HW according to the deviation + * to achieve the desired led frequency + * The calculation is: (100-averageDeviation)/100 * blinkTime + * For code efficiency the calculation will be: + * compensation = (100 - averageDeviation) * 64 / 100 + * NewBlinkTime = (compensation * BlinkTime) / 64 + */ +static inline u8 iwl_blink_compensation(struct iwl_priv *priv, + u8 time, u16 compensation) +{ + if (!compensation) { + IWL_ERR(priv, "undefined blink compensation: " + "use pre-defined blinking time\n"); + return time; + } + + return (u8)((time * compensation) >> 6); +} + +static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_LEDS_CMD, + .len = { sizeof(struct iwl_led_cmd), }, + .data = { led_cmd, }, + .flags = CMD_ASYNC, + }; + u32 reg; + + reg = iwl_read32(priv->trans, CSR_LED_REG); + if (reg != (reg & CSR_LED_BSM_CTRL_MSK)) + iwl_write32(priv->trans, CSR_LED_REG, + reg & CSR_LED_BSM_CTRL_MSK); + + return iwl_dvm_send_cmd(priv, &cmd); +} + +/* Set led pattern command */ +static int iwl_led_cmd(struct iwl_priv *priv, + unsigned long on, + unsigned long off) +{ + struct iwl_led_cmd led_cmd = { + .id = IWL_LED_LINK, + .interval = IWL_DEF_LED_INTRVL + }; + int ret; + + if (!test_bit(STATUS_READY, &priv->status)) + return -EBUSY; + + if (priv->blink_on == on && priv->blink_off == off) + return 0; + + if (off == 0) { + /* led is SOLID_ON */ + on = IWL_LED_SOLID; + } + + IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n", + priv->cfg->base_params->led_compensation); + led_cmd.on = iwl_blink_compensation(priv, on, + priv->cfg->base_params->led_compensation); + led_cmd.off = iwl_blink_compensation(priv, off, + priv->cfg->base_params->led_compensation); + + ret = iwl_send_led_cmd(priv, &led_cmd); + if (!ret) { + priv->blink_on = on; + priv->blink_off = off; + } + return ret; +} + +static void iwl_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led); + unsigned long on = 0; + + if (brightness > 0) + on = IWL_LED_SOLID; + + iwl_led_cmd(priv, on, 0); +} + +static int iwl_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led); + + return iwl_led_cmd(priv, *delay_on, *delay_off); +} + +void iwl_leds_init(struct iwl_priv *priv) +{ + int mode = iwlwifi_mod_params.led_mode; + int ret; + + if (mode == IWL_LED_DISABLE) { + IWL_INFO(priv, "Led disabled\n"); + return; + } + if (mode == IWL_LED_DEFAULT) + mode = priv->cfg->led_mode; + + priv->led.name = kasprintf(GFP_KERNEL, "%s-led", + wiphy_name(priv->hw->wiphy)); + priv->led.brightness_set = iwl_led_brightness_set; + priv->led.blink_set = iwl_led_blink_set; + priv->led.max_brightness = 1; + + switch (mode) { + case IWL_LED_DEFAULT: + WARN_ON(1); + break; + case IWL_LED_BLINK: + priv->led.default_trigger = + ieee80211_create_tpt_led_trigger(priv->hw, + IEEE80211_TPT_LEDTRIG_FL_CONNECTED, + iwl_blink, ARRAY_SIZE(iwl_blink)); + break; + case IWL_LED_RF_STATE: + priv->led.default_trigger = + ieee80211_get_radio_led_name(priv->hw); + break; + } + + ret = led_classdev_register(priv->trans->dev, &priv->led); + if (ret) { + kfree(priv->led.name); + return; + } + + priv->led_registered = true; +} + +void iwl_leds_exit(struct iwl_priv *priv) +{ + if (!priv->led_registered) + return; + + led_classdev_unregister(&priv->led); + kfree(priv->led.name); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/led.h b/drivers/net/wireless/iwlwifi/dvm/led.h new file mode 100644 index 00000000000..b02a853103d --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/led.h @@ -0,0 +1,43 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __iwl_leds_h__ +#define __iwl_leds_h__ + + +struct iwl_priv; + +#define IWL_LED_SOLID 11 +#define IWL_DEF_LED_INTRVL cpu_to_le32(1000) + +#define IWL_LED_ACTIVITY (0<<1) +#define IWL_LED_LINK (1<<1) + +void iwlagn_led_enable(struct iwl_priv *priv); +void iwl_leds_init(struct iwl_priv *priv); +void iwl_leds_exit(struct iwl_priv *priv); + +#endif /* __iwl_leds_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c new file mode 100644 index 00000000000..bef88c1a2c9 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -0,0 +1,1293 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <net/mac80211.h> + +#include "iwl-io.h" +#include "iwl-agn-hw.h" +#include "iwl-trans.h" +#include "iwl-modparams.h" + +#include "dev.h" +#include "agn.h" + +int iwlagn_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) && + (addr < IWLAGN_RTC_DATA_UPPER_BOUND); +} + +int iwlagn_send_tx_power(struct iwl_priv *priv) +{ + struct iwlagn_tx_power_dbm_cmd tx_power_cmd; + u8 tx_ant_cfg_cmd; + + if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + /* half dBm need to multiply */ + tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); + + if (tx_power_cmd.global_lmt > priv->eeprom_data->max_tx_pwr_half_dbm) { + /* + * For the newer devices which using enhanced/extend tx power + * table in EEPROM, the format is in half dBm. driver need to + * convert to dBm format before report to mac80211. + * By doing so, there is a possibility of 1/2 dBm resolution + * lost. driver will perform "round-up" operation before + * reporting, but it will cause 1/2 dBm tx power over the + * regulatory limit. Perform the checking here, if the + * "tx_power_user_lmt" is higher than EEPROM value (in + * half-dBm format), lower the tx power based on EEPROM + */ + tx_power_cmd.global_lmt = + priv->eeprom_data->max_tx_pwr_half_dbm; + } + tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED; + tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO; + + if (IWL_UCODE_API(priv->fw->ucode_ver) == 1) + tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1; + else + tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD; + + return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, CMD_SYNC, + sizeof(tx_power_cmd), &tx_power_cmd); +} + +void iwlagn_temperature(struct iwl_priv *priv) +{ + lockdep_assert_held(&priv->statistics.lock); + + /* store temperature from correct statistics (in Celsius) */ + priv->temperature = le32_to_cpu(priv->statistics.common.temperature); + iwl_tt_handler(priv); +} + +int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) +{ + int idx = 0; + int band_offset = 0; + + /* HT rate format: mac80211 wants an MCS number, which is just LSB */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + return idx; + /* Legacy rate format, search for match in table */ + } else { + if (band == IEEE80211_BAND_5GHZ) + band_offset = IWL_FIRST_OFDM_RATE; + for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) + if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx - band_offset; + } + + return -1; +} + +int iwlagn_manage_ibss_station(struct iwl_priv *priv, + struct ieee80211_vif *vif, bool add) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + if (add) + return iwlagn_add_bssid_station(priv, vif_priv->ctx, + vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +/** + * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode + * + * pre-requirements: + * 1. acquire mutex before calling + * 2. make sure rf is on and not in exit state + */ +int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control) +{ + struct iwl_txfifo_flush_cmd flush_cmd; + struct iwl_host_cmd cmd = { + .id = REPLY_TXFIFO_FLUSH, + .len = { sizeof(struct iwl_txfifo_flush_cmd), }, + .flags = CMD_SYNC, + .data = { &flush_cmd, }, + }; + + might_sleep(); + + memset(&flush_cmd, 0, sizeof(flush_cmd)); + if (flush_control & BIT(IWL_RXON_CTX_BSS)) + flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK | + IWL_SCD_BE_MSK | IWL_SCD_BK_MSK | + IWL_SCD_MGMT_MSK; + if ((flush_control & BIT(IWL_RXON_CTX_PAN)) && + (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))) + flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK | + IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK | + IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK | + IWL_PAN_SCD_MULTICAST_MSK; + + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE) + flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK; + + IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n", + flush_cmd.fifo_control); + flush_cmd.flush_control = cpu_to_le16(flush_control); + + return iwl_dvm_send_cmd(priv, &cmd); +} + +void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control) +{ + mutex_lock(&priv->mutex); + ieee80211_stop_queues(priv->hw); + if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { + IWL_ERR(priv, "flush request fail\n"); + goto done; + } + IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n"); + iwl_trans_wait_tx_queue_empty(priv->trans); +done: + ieee80211_wake_queues(priv->hw); + mutex_unlock(&priv->mutex); +} + +/* + * BT coex + */ +/* Notmal TDM */ +static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaeaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xcc00ff28), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xcc00aaaa), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xc0004000), + cpu_to_le32(0x00004000), + cpu_to_le32(0xf0005000), + cpu_to_le32(0xf0005000), +}; + + +/* Loose Coex */ +static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaeaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xcc00ff28), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xcc00aaaa), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0xf0005000), + cpu_to_le32(0xf0005000), +}; + +/* Full concurrency */ +static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), + cpu_to_le32(0x00000000), +}; + +void iwlagn_send_advance_bt_config(struct iwl_priv *priv) +{ + struct iwl_basic_bt_cmd basic = { + .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT, + .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT, + .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT, + .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT, + }; + struct iwl_bt_cmd_v1 bt_cmd_v1; + struct iwl_bt_cmd_v2 bt_cmd_v2; + int ret; + + BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != + sizeof(basic.bt3_lookup_table)); + + if (priv->cfg->bt_params) { + /* + * newer generation of devices (2000 series and newer) + * use the version 2 of the bt command + * we need to make sure sending the host command + * with correct data structure to avoid uCode assert + */ + if (priv->cfg->bt_params->bt_session_2) { + bt_cmd_v2.prio_boost = cpu_to_le32( + priv->cfg->bt_params->bt_prio_boost); + bt_cmd_v2.tx_prio_boost = 0; + bt_cmd_v2.rx_prio_boost = 0; + } else { + /* older version only has 8 bits */ + WARN_ON(priv->cfg->bt_params->bt_prio_boost & ~0xFF); + bt_cmd_v1.prio_boost = + priv->cfg->bt_params->bt_prio_boost; + bt_cmd_v1.tx_prio_boost = 0; + bt_cmd_v1.rx_prio_boost = 0; + } + } else { + IWL_ERR(priv, "failed to construct BT Coex Config\n"); + return; + } + + /* + * Possible situations when BT needs to take over for receive, + * at the same time where STA needs to response to AP's frame(s), + * reduce the tx power of the required response frames, by that, + * allow the concurrent BT receive & WiFi transmit + * (BT - ANT A, WiFi -ANT B), without interference to one another + * + * Reduced tx power apply to control frames only (ACK/Back/CTS) + * when indicated by the BT config command + */ + basic.kill_ack_mask = priv->kill_ack_mask; + basic.kill_cts_mask = priv->kill_cts_mask; + if (priv->reduced_txpower) + basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR; + basic.valid = priv->bt_valid; + + /* + * Configure BT coex mode to "no coexistence" when the + * user disabled BT coexistence, we have no interface + * (might be in monitor mode), or the interface is in + * IBSS mode (no proper uCode support for coex then). + */ + if (!iwlwifi_mod_params.bt_coex_active || + priv->iw_mode == NL80211_IFTYPE_ADHOC) { + basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED; + } else { + basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W << + IWLAGN_BT_FLAG_COEX_MODE_SHIFT; + + if (!priv->bt_enable_pspoll) + basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; + else + basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; + + if (priv->bt_ch_announce) + basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION; + IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags); + } + priv->bt_enable_flag = basic.flags; + if (priv->bt_full_concurrent) + memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup, + sizeof(iwlagn_concurrent_lookup)); + else + memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup, + sizeof(iwlagn_def_3w_lookup)); + + IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n", + basic.flags ? "active" : "disabled", + priv->bt_full_concurrent ? + "full concurrency" : "3-wire"); + + if (priv->cfg->bt_params->bt_session_2) { + memcpy(&bt_cmd_v2.basic, &basic, + sizeof(basic)); + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, + CMD_SYNC, sizeof(bt_cmd_v2), &bt_cmd_v2); + } else { + memcpy(&bt_cmd_v1.basic, &basic, + sizeof(basic)); + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, + CMD_SYNC, sizeof(bt_cmd_v1), &bt_cmd_v1); + } + if (ret) + IWL_ERR(priv, "failed to send BT Coex Config\n"); + +} + +void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena) +{ + struct iwl_rxon_context *ctx, *found_ctx = NULL; + bool found_ap = false; + + lockdep_assert_held(&priv->mutex); + + /* Check whether AP or GO mode is active. */ + if (rssi_ena) { + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP && + iwl_is_associated_ctx(ctx)) { + found_ap = true; + break; + } + } + } + + /* + * If disable was received or If GO/AP mode, disable RSSI + * measurements. + */ + if (!rssi_ena || found_ap) { + if (priv->cur_rssi_ctx) { + ctx = priv->cur_rssi_ctx; + ieee80211_disable_rssi_reports(ctx->vif); + priv->cur_rssi_ctx = NULL; + } + return; + } + + /* + * If rssi measurements need to be enabled, consider all cases now. + * Figure out how many contexts are active. + */ + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && + iwl_is_associated_ctx(ctx)) { + found_ctx = ctx; + break; + } + } + + /* + * rssi monitor already enabled for the correct interface...nothing + * to do. + */ + if (found_ctx == priv->cur_rssi_ctx) + return; + + /* + * Figure out if rssi monitor is currently enabled, and needs + * to be changed. If rssi monitor is already enabled, disable + * it first else just enable rssi measurements on the + * interface found above. + */ + if (priv->cur_rssi_ctx) { + ctx = priv->cur_rssi_ctx; + if (ctx->vif) + ieee80211_disable_rssi_reports(ctx->vif); + } + + priv->cur_rssi_ctx = found_ctx; + + if (!found_ctx) + return; + + ieee80211_enable_rssi_reports(found_ctx->vif, + IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD, + IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD); +} + +static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg) +{ + return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >> + BT_UART_MSG_FRAME3SCOESCO_POS; +} + +static void iwlagn_bt_traffic_change_work(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, bt_traffic_change_work); + struct iwl_rxon_context *ctx; + int smps_request = -1; + + if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { + /* bt coex disabled */ + return; + } + + /* + * Note: bt_traffic_load can be overridden by scan complete and + * coex profile notifications. Ignore that since only bad consequence + * can be not matching debug print with actual state. + */ + IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n", + priv->bt_traffic_load); + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + if (priv->bt_status) + smps_request = IEEE80211_SMPS_DYNAMIC; + else + smps_request = IEEE80211_SMPS_AUTOMATIC; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + smps_request = IEEE80211_SMPS_DYNAMIC; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + smps_request = IEEE80211_SMPS_STATIC; + break; + default: + IWL_ERR(priv, "Invalid BT traffic load: %d\n", + priv->bt_traffic_load); + break; + } + + mutex_lock(&priv->mutex); + + /* + * We can not send command to firmware while scanning. When the scan + * complete we will schedule this work again. We do check with mutex + * locked to prevent new scan request to arrive. We do not check + * STATUS_SCANNING to avoid race when queue_work two times from + * different notifications, but quit and not perform any work at all. + */ + if (test_bit(STATUS_SCAN_HW, &priv->status)) + goto out; + + iwl_update_chain_flags(priv); + + if (smps_request != -1) { + priv->current_ht_config.smps = smps_request; + for_each_context(priv, ctx) { + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) + ieee80211_request_smps(ctx->vif, smps_request); + } + } + + /* + * Dynamic PS poll related functionality. Adjust RSSI measurements if + * necessary. + */ + iwlagn_bt_coex_rssi_monitor(priv); +out: + mutex_unlock(&priv->mutex); +} + +/* + * If BT sco traffic, and RSSI monitor is enabled, move measurements to the + * correct interface or disable it if this is the last interface to be + * removed. + */ +void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv) +{ + if (priv->bt_is_sco && + priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS) + iwlagn_bt_adjust_rssi_monitor(priv, true); + else + iwlagn_bt_adjust_rssi_monitor(priv, false); +} + +static void iwlagn_print_uartmsg(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, " + "Update Req = 0x%X\n", + (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1MSGTYPE_POS, + (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1SSN_POS, + (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >> + BT_UART_MSG_FRAME1UPDATEREQ_POS); + + IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, " + "Chl_SeqN = 0x%X, In band = 0x%X\n", + (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2OPENCONNECTIONS_POS, + (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2TRAFFICLOAD_POS, + (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2CHLSEQN_POS, + (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >> + BT_UART_MSG_FRAME2INBAND_POS); + + IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, " + "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n", + (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3SCOESCO_POS, + (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3SNIFF_POS, + (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3A2DP_POS, + (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3ACL_POS, + (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3MASTER_POS, + (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >> + BT_UART_MSG_FRAME3OBEX_POS); + + IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n", + (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >> + BT_UART_MSG_FRAME4IDLEDURATION_POS); + + IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, " + "eSCO Retransmissions = 0x%X\n", + (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5TXACTIVITY_POS, + (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5RXACTIVITY_POS, + (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >> + BT_UART_MSG_FRAME5ESCORETRANSMIT_POS); + + IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n", + (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >> + BT_UART_MSG_FRAME6SNIFFINTERVAL_POS, + (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >> + BT_UART_MSG_FRAME6DISCOVERABLE_POS); + + IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = " + "0x%X, Inquiry = 0x%X, Connectable = 0x%X\n", + (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7SNIFFACTIVITY_POS, + (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7PAGE_POS, + (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7INQUIRY_POS, + (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >> + BT_UART_MSG_FRAME7CONNECTABLE_POS); +} + +static bool iwlagn_set_kill_msk(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + bool need_update = false; + u8 kill_msk = IWL_BT_KILL_REDUCE; + static const __le32 bt_kill_ack_msg[3] = { + IWLAGN_BT_KILL_ACK_MASK_DEFAULT, + IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, + IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; + static const __le32 bt_kill_cts_msg[3] = { + IWLAGN_BT_KILL_CTS_MASK_DEFAULT, + IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, + IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; + + if (!priv->reduced_txpower) + kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) + ? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT; + if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] || + priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) { + priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK; + priv->kill_ack_mask = bt_kill_ack_msg[kill_msk]; + priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK; + priv->kill_cts_mask = bt_kill_cts_msg[kill_msk]; + need_update = true; + } + return need_update; +} + +/* + * Upon RSSI changes, sends a bt config command with following changes + * 1. enable/disable "reduced control frames tx power + * 2. update the "kill)ack_mask" and "kill_cts_mask" + * + * If "reduced tx power" is enabled, uCode shall + * 1. ACK/Back/CTS rate shall reduced to 6Mbps + * 2. not use duplciate 20/40MHz mode + */ +static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv, + struct iwl_bt_uart_msg *uart_msg) +{ + bool need_update = false; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + int ave_rssi; + + if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) { + IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n"); + return false; + } + + ave_rssi = ieee80211_ave_rssi(ctx->vif); + if (!ave_rssi) { + /* no rssi data, no changes to reduce tx power */ + IWL_DEBUG_COEX(priv, "no rssi data available\n"); + return need_update; + } + if (!priv->reduced_txpower && + !iwl_is_associated(priv, IWL_RXON_CTX_PAN) && + (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) && + (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | + BT_UART_MSG_FRAME3OBEX_MSK)) && + !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | + BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) { + /* enabling reduced tx power */ + priv->reduced_txpower = true; + priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; + need_update = true; + } else if (priv->reduced_txpower && + (iwl_is_associated(priv, IWL_RXON_CTX_PAN) || + (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) || + (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | + BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) || + !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | + BT_UART_MSG_FRAME3OBEX_MSK)))) { + /* disable reduced tx power */ + priv->reduced_txpower = false; + priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; + need_update = true; + } + + return need_update; +} + +int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data; + struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg; + + if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { + /* bt coex disabled */ + return 0; + } + + IWL_DEBUG_COEX(priv, "BT Coex notification:\n"); + IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status); + IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load); + IWL_DEBUG_COEX(priv, " CI compliance: %d\n", + coex->bt_ci_compliance); + iwlagn_print_uartmsg(priv, uart_msg); + + priv->last_bt_traffic_load = priv->bt_traffic_load; + priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg); + + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { + if (priv->bt_status != coex->bt_status || + priv->last_bt_traffic_load != coex->bt_traffic_load) { + if (coex->bt_status) { + /* BT on */ + if (!priv->bt_ch_announce) + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_HIGH; + else + priv->bt_traffic_load = + coex->bt_traffic_load; + } else { + /* BT off */ + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_NONE; + } + priv->bt_status = coex->bt_status; + queue_work(priv->workqueue, + &priv->bt_traffic_change_work); + } + } + + /* schedule to send runtime bt_config */ + /* check reduce power before change ack/cts kill mask */ + if (iwlagn_fill_txpower_mode(priv, uart_msg) || + iwlagn_set_kill_msk(priv, uart_msg)) + queue_work(priv->workqueue, &priv->bt_runtime_config); + + + /* FIXME: based on notification, adjust the prio_boost */ + + priv->bt_ci_compliance = coex->bt_ci_compliance; + return 0; +} + +void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] = + iwlagn_bt_coex_profile_notif; +} + +void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv) +{ + INIT_WORK(&priv->bt_traffic_change_work, + iwlagn_bt_traffic_change_work); +} + +void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv) +{ + cancel_work_sync(&priv->bt_traffic_change_work); +} + +static bool is_single_rx_stream(struct iwl_priv *priv) +{ + return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || + priv->current_ht_config.single_chain_sufficient; +} + +#define IWL_NUM_RX_CHAINS_MULTIPLE 3 +#define IWL_NUM_RX_CHAINS_SINGLE 2 +#define IWL_NUM_IDLE_CHAINS_DUAL 2 +#define IWL_NUM_IDLE_CHAINS_SINGLE 1 + +/* + * Determine how many receiver/antenna chains to use. + * + * More provides better reception via diversity. Fewer saves power + * at the expense of throughput, but only when not in powersave to + * start with. + * + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) +{ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + (priv->bt_full_concurrent || + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { + /* + * only use chain 'A' in bt high traffic load or + * full concurrency mode + */ + return IWL_NUM_RX_CHAINS_SINGLE; + } + /* # of Rx chains to use when expecting MIMO. */ + if (is_single_rx_stream(priv)) + return IWL_NUM_RX_CHAINS_SINGLE; + else + return IWL_NUM_RX_CHAINS_MULTIPLE; +} + +/* + * When we are in power saving mode, unless device support spatial + * multiplexing power save, use the active count for rx chain count. + */ +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + /* # Rx chains when idling, depending on SMPS mode */ + switch (priv->current_ht_config.smps) { + case IEEE80211_SMPS_STATIC: + case IEEE80211_SMPS_DYNAMIC: + return IWL_NUM_IDLE_CHAINS_SINGLE; + case IEEE80211_SMPS_AUTOMATIC: + case IEEE80211_SMPS_OFF: + return active_cnt; + default: + WARN(1, "invalid SMPS mode %d", + priv->current_ht_config.smps); + return active_cnt; + } +} + +/* up to 4 chains */ +static u8 iwl_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(3)) >> 3; + return res; +} + +/** + * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; + u16 rx_chain; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + if (priv->chain_noise_data.active_chains) + active_chains = priv->chain_noise_data.active_chains; + else + active_chains = priv->eeprom_data->valid_rx_ant; + + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + (priv->bt_full_concurrent || + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { + /* + * only use chain 'A' in bt high traffic load or + * full concurrency mode + */ + active_chains = first_antenna(active_chains); + } + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; + + /* How many receivers should we use? */ + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = iwl_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + ctx->staging.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) + ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", + ctx->staging.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); +} + +u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) +{ + int i; + u8 ind = ant; + + if (priv->band == IEEE80211_BAND_2GHZ && + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) + return 0; + + for (i = 0; i < RATE_ANT_NUM - 1; i++) { + ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; + if (valid & BIT(ind)) + return ind; + } + return ant; +} + +#ifdef CONFIG_PM_SLEEP +static void iwlagn_convert_p1k(u16 *p1k, __le16 *out) +{ + int i; + + for (i = 0; i < IWLAGN_P1K_SIZE; i++) + out[i] = cpu_to_le16(p1k[i]); +} + +struct wowlan_key_data { + struct iwl_rxon_context *ctx; + struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc; + struct iwlagn_wowlan_tkip_params_cmd *tkip; + const u8 *bssid; + bool error, use_rsc_tsc, use_tkip; +}; + + +static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + void *_data) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct wowlan_key_data *data = _data; + struct iwl_rxon_context *ctx = data->ctx; + struct aes_sc *aes_sc, *aes_tx_sc = NULL; + struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; + struct iwlagn_p1k_cache *rx_p1ks; + u8 *rx_mic_key; + struct ieee80211_key_seq seq; + u32 cur_rx_iv32 = 0; + u16 p1k[IWLAGN_P1K_SIZE]; + int ret, i; + + mutex_lock(&priv->mutex); + + if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) && + !sta && !ctx->key_mapping_keys) + ret = iwl_set_default_wep_key(priv, ctx, key); + else + ret = iwl_set_dynamic_key(priv, ctx, key, sta); + + if (ret) { + IWL_ERR(priv, "Error setting key during suspend!\n"); + data->error = true; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + if (sta) { + tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; + tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; + + rx_p1ks = data->tkip->rx_uni; + + ieee80211_get_key_tx_seq(key, &seq); + tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32); + + ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); + iwlagn_convert_p1k(p1k, data->tkip->tx.p1k); + + memcpy(data->tkip->mic_keys.tx, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + IWLAGN_MIC_KEY_SIZE); + + rx_mic_key = data->tkip->mic_keys.rx_unicast; + } else { + tkip_sc = + data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; + rx_p1ks = data->tkip->rx_multi; + rx_mic_key = data->tkip->mic_keys.rx_mcast; + } + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 (as they need to to avoid replay attacks) + * for checking the IV in the frames. + */ + for (i = 0; i < IWLAGN_NUM_RSC; i++) { + ieee80211_get_key_rx_seq(key, i, &seq); + tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); + tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); + /* wrapping isn't allowed, AP must rekey */ + if (seq.tkip.iv32 > cur_rx_iv32) + cur_rx_iv32 = seq.tkip.iv32; + } + + ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k); + iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k); + ieee80211_get_tkip_rx_p1k(key, data->bssid, + cur_rx_iv32 + 1, p1k); + iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k); + + memcpy(rx_mic_key, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + IWLAGN_MIC_KEY_SIZE); + + data->use_tkip = true; + data->use_rsc_tsc = true; + break; + case WLAN_CIPHER_SUITE_CCMP: + if (sta) { + u8 *pn = seq.ccmp.pn; + + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; + aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; + + ieee80211_get_key_tx_seq(key, &seq); + aes_tx_sc->pn = cpu_to_le64( + (u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } else + aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; + + /* + * For non-QoS this relies on the fact that both the uCode and + * mac80211 use TID 0 for checking the IV in the frames. + */ + for (i = 0; i < IWLAGN_NUM_RSC; i++) { + u8 *pn = seq.ccmp.pn; + + ieee80211_get_key_rx_seq(key, i, &seq); + aes_sc->pn = cpu_to_le64( + (u64)pn[5] | + ((u64)pn[4] << 8) | + ((u64)pn[3] << 16) | + ((u64)pn[2] << 24) | + ((u64)pn[1] << 32) | + ((u64)pn[0] << 40)); + } + data->use_rsc_tsc = true; + break; + } + + mutex_unlock(&priv->mutex); +} + +int iwlagn_send_patterns(struct iwl_priv *priv, + struct cfg80211_wowlan *wowlan) +{ + struct iwlagn_wowlan_patterns_cmd *pattern_cmd; + struct iwl_host_cmd cmd = { + .id = REPLY_WOWLAN_PATTERNS, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .flags = CMD_SYNC, + }; + int i, err; + + if (!wowlan->n_patterns) + return 0; + + cmd.len[0] = sizeof(*pattern_cmd) + + wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern); + + pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); + if (!pattern_cmd) + return -ENOMEM; + + pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); + + for (i = 0; i < wowlan->n_patterns; i++) { + int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); + + memcpy(&pattern_cmd->patterns[i].mask, + wowlan->patterns[i].mask, mask_len); + memcpy(&pattern_cmd->patterns[i].pattern, + wowlan->patterns[i].pattern, + wowlan->patterns[i].pattern_len); + pattern_cmd->patterns[i].mask_size = mask_len; + pattern_cmd->patterns[i].pattern_size = + wowlan->patterns[i].pattern_len; + } + + cmd.data[0] = pattern_cmd; + err = iwl_dvm_send_cmd(priv, &cmd); + kfree(pattern_cmd); + return err; +} + +int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan) +{ + struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd; + struct iwl_rxon_cmd rxon; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd; + struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {}; + struct iwlagn_d3_config_cmd d3_cfg_cmd = {}; + struct wowlan_key_data key_data = { + .ctx = ctx, + .bssid = ctx->active.bssid_addr, + .use_rsc_tsc = false, + .tkip = &tkip_cmd, + .use_tkip = false, + }; + int ret, i; + u16 seq; + + key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); + if (!key_data.rsc_tsc) + return -ENOMEM; + + memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd)); + + /* + * We know the last used seqno, and the uCode expects to know that + * one, it will increment before TX. + */ + seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ; + wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq); + + /* + * For QoS counters, we store the one to use next, so subtract 0x10 + * since the uCode will add 0x10 before using the value. + */ + for (i = 0; i < IWL_MAX_TID_COUNT; i++) { + seq = priv->tid_data[IWL_AP_ID][i].seq_number; + seq -= 0x10; + wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq); + } + + if (wowlan->disconnect) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | + IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE); + if (wowlan->magic_pkt) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET); + if (wowlan->gtk_rekey_failure) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL); + if (wowlan->eap_identity_req) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ); + if (wowlan->four_way_handshake) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE); + if (wowlan->n_patterns) + wakeup_filter_cmd.enabled |= + cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH); + + if (wowlan->rfkill_release) + d3_cfg_cmd.wakeup_flags |= + cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL); + + iwl_scan_cancel_timeout(priv, 200); + + memcpy(&rxon, &ctx->active, sizeof(rxon)); + + priv->ucode_loaded = false; + iwl_trans_stop_device(priv->trans); + + priv->wowlan = true; + + ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); + if (ret) + goto out; + + /* now configure WoWLAN ucode */ + ret = iwl_alive_start(priv); + if (ret) + goto out; + + memcpy(&ctx->staging, &rxon, sizeof(rxon)); + ret = iwlagn_commit_rxon(priv, ctx); + if (ret) + goto out; + + ret = iwl_power_update_mode(priv, true); + if (ret) + goto out; + + if (!iwlwifi_mod_params.sw_crypto) { + /* mark all keys clear */ + priv->ucode_key_table = 0; + ctx->key_mapping_keys = 0; + + /* + * This needs to be unlocked due to lock ordering + * constraints. Since we're in the suspend path + * that isn't really a problem though. + */ + mutex_unlock(&priv->mutex); + ieee80211_iter_keys(priv->hw, ctx->vif, + iwlagn_wowlan_program_keys, + &key_data); + mutex_lock(&priv->mutex); + if (key_data.error) { + ret = -EIO; + goto out; + } + + if (key_data.use_rsc_tsc) { + struct iwl_host_cmd rsc_tsc_cmd = { + .id = REPLY_WOWLAN_TSC_RSC_PARAMS, + .flags = CMD_SYNC, + .data[0] = key_data.rsc_tsc, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, + .len[0] = sizeof(*key_data.rsc_tsc), + }; + + ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd); + if (ret) + goto out; + } + + if (key_data.use_tkip) { + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_WOWLAN_TKIP_PARAMS, + CMD_SYNC, sizeof(tkip_cmd), + &tkip_cmd); + if (ret) + goto out; + } + + if (priv->have_rekey_data) { + memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); + memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN); + kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); + memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN); + kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); + kek_kck_cmd.replay_ctr = priv->replay_ctr; + + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_WOWLAN_KEK_KCK_MATERIAL, + CMD_SYNC, sizeof(kek_kck_cmd), + &kek_kck_cmd); + if (ret) + goto out; + } + } + + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, CMD_SYNC, + sizeof(d3_cfg_cmd), &d3_cfg_cmd); + if (ret) + goto out; + + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER, + CMD_SYNC, sizeof(wakeup_filter_cmd), + &wakeup_filter_cmd); + if (ret) + goto out; + + ret = iwlagn_send_patterns(priv, wowlan); + out: + kfree(key_data.rsc_tsc); + return ret; +} +#endif + +int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) +{ + if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { + IWL_WARN(priv, "Not sending command - %s KILL\n", + iwl_is_rfkill(priv) ? "RF" : "CT"); + return -EIO; + } + + if (test_bit(STATUS_FW_ERROR, &priv->status)) { + IWL_ERR(priv, "Command %s failed: FW Error\n", + iwl_dvm_get_cmd_string(cmd->id)); + return -EIO; + } + + /* + * Synchronous commands from this op-mode must hold + * the mutex, this ensures we don't try to send two + * (or more) synchronous commands at a time. + */ + if (!(cmd->flags & CMD_ASYNC)) + lockdep_assert_held(&priv->mutex); + + if (priv->ucode_owner == IWL_OWNERSHIP_TM && + !(cmd->flags & CMD_ON_DEMAND)) { + IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n"); + return -EIO; + } + + return iwl_trans_send_cmd(priv->trans, cmd); +} + +int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, + u32 flags, u16 len, const void *data) +{ + struct iwl_host_cmd cmd = { + .id = id, + .len = { len, }, + .data = { data, }, + .flags = flags, + }; + + return iwl_dvm_send_cmd(priv, &cmd); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c new file mode 100644 index 00000000000..a5f7bce9632 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -0,0 +1,1652 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> + +#include <net/ieee80211_radiotap.h> +#include <net/mac80211.h> + +#include <asm/div64.h> + +#include "iwl-io.h" +#include "iwl-trans.h" +#include "iwl-op-mode.h" +#include "iwl-modparams.h" + +#include "dev.h" +#include "calib.h" +#include "agn.h" + +/***************************************************************************** + * + * mac80211 entry point functions + * + *****************************************************************************/ + +static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_AP), + }, +}; + +static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = { + { + .max = 2, + .types = BIT(NL80211_IFTYPE_STATION), + }, +}; + +static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_AP), + }, +}; + +static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = { + { + .max = 2, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_CLIENT), + }, +}; + +static const struct ieee80211_iface_combination +iwlagn_iface_combinations_dualmode[] = { + { .num_different_channels = 1, + .max_interfaces = 2, + .beacon_int_infra_match = true, + .limits = iwlagn_sta_ap_limits, + .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits), + }, + { .num_different_channels = 1, + .max_interfaces = 2, + .limits = iwlagn_2sta_limits, + .n_limits = ARRAY_SIZE(iwlagn_2sta_limits), + }, +}; + +static const struct ieee80211_iface_combination +iwlagn_iface_combinations_p2p[] = { + { .num_different_channels = 1, + .max_interfaces = 2, + .beacon_int_infra_match = true, + .limits = iwlagn_p2p_sta_go_limits, + .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits), + }, + { .num_different_channels = 1, + .max_interfaces = 2, + .limits = iwlagn_p2p_2sta_limits, + .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits), + }, +}; + +/* + * Not a mac80211 entry point function, but it fits in with all the + * other mac80211 functions grouped here. + */ +int iwlagn_mac_setup_register(struct iwl_priv *priv, + const struct iwl_ucode_capabilities *capa) +{ + int ret; + struct ieee80211_hw *hw = priv->hw; + struct iwl_rxon_context *ctx; + + hw->rate_control_algorithm = "iwl-agn-rs"; + + /* Tell mac80211 our characteristics */ + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_QUEUE_CONTROL | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS | + IEEE80211_HW_WANT_MONITOR_VIF | + IEEE80211_HW_SCAN_WHILE_IDLE; + + hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE; + hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; + + /* + * Including the following line will crash some AP's. This + * workaround removes the stimulus which causes the crash until + * the AP software can be fixed. + hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + */ + + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE) + hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | + IEEE80211_HW_SUPPORTS_STATIC_SMPS; + +#ifndef CONFIG_IWLWIFI_EXPERIMENTAL_MFP + /* enable 11w if the uCode advertise */ + if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP) +#endif /* !CONFIG_IWLWIFI_EXPERIMENTAL_MFP */ + hw->flags |= IEEE80211_HW_MFP_CAPABLE; + + hw->sta_data_size = sizeof(struct iwl_station_priv); + hw->vif_data_size = sizeof(struct iwl_vif_priv); + + for_each_context(priv, ctx) { + hw->wiphy->interface_modes |= ctx->interface_modes; + hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; + } + + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); + + if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) { + hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p; + hw->wiphy->n_iface_combinations = + ARRAY_SIZE(iwlagn_iface_combinations_p2p); + } else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { + hw->wiphy->iface_combinations = + iwlagn_iface_combinations_dualmode; + hw->wiphy->n_iface_combinations = + ARRAY_SIZE(iwlagn_iface_combinations_dualmode); + } + + hw->wiphy->max_remain_on_channel_duration = 1000; + + hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | + WIPHY_FLAG_DISABLE_BEACON_HINTS | + WIPHY_FLAG_IBSS_RSN; + +#ifdef CONFIG_PM_SLEEP + if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && + priv->trans->ops->wowlan_suspend && + device_can_wakeup(priv->trans->dev)) { + hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | + WIPHY_WOWLAN_DISCONNECT | + WIPHY_WOWLAN_EAP_IDENTITY_REQ | + WIPHY_WOWLAN_RFKILL_RELEASE; + if (!iwlwifi_mod_params.sw_crypto) + hw->wiphy->wowlan.flags |= + WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | + WIPHY_WOWLAN_GTK_REKEY_FAILURE; + + hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS; + hw->wiphy->wowlan.pattern_min_len = + IWLAGN_WOWLAN_MIN_PATTERN_LEN; + hw->wiphy->wowlan.pattern_max_len = + IWLAGN_WOWLAN_MAX_PATTERN_LEN; + } +#endif + + if (iwlwifi_mod_params.power_save) + hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; + else + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; + /* we create the 802.11 header and a max-length SSID element */ + hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 34; + + /* + * We don't use all queues: 4 and 9 are unused and any + * aggregation queue gets mapped down to the AC queue. + */ + hw->queues = IWLAGN_FIRST_AMPDU_QUEUE; + + hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; + + if (priv->eeprom_data->bands[IEEE80211_BAND_2GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &priv->eeprom_data->bands[IEEE80211_BAND_2GHZ]; + if (priv->eeprom_data->bands[IEEE80211_BAND_5GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &priv->eeprom_data->bands[IEEE80211_BAND_5GHZ]; + + hw->wiphy->hw_version = priv->trans->hw_id; + + iwl_leds_init(priv); + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + iwl_leds_exit(priv); + return ret; + } + priv->mac80211_registered = 1; + + return 0; +} + +void iwlagn_mac_unregister(struct iwl_priv *priv) +{ + if (!priv->mac80211_registered) + return; + iwl_leds_exit(priv); + ieee80211_unregister_hw(priv->hw); + priv->mac80211_registered = 0; +} + +static int __iwl_up(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + int ret; + + lockdep_assert_held(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); + return -EIO; + } + + for_each_context(priv, ctx) { + ret = iwlagn_alloc_bcast_station(priv, ctx); + if (ret) { + iwl_dealloc_bcast_stations(priv); + return ret; + } + } + + ret = iwl_run_init_ucode(priv); + if (ret) { + IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret); + goto error; + } + + ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR); + if (ret) { + IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret); + goto error; + } + + ret = iwl_alive_start(priv); + if (ret) + goto error; + return 0; + + error: + set_bit(STATUS_EXIT_PENDING, &priv->status); + iwl_down(priv); + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + IWL_ERR(priv, "Unable to initialize device.\n"); + return ret; +} + +static int iwlagn_mac_start(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + int ret; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + /* we should be verifying the device is ready to be opened */ + mutex_lock(&priv->mutex); + ret = __iwl_up(priv); + mutex_unlock(&priv->mutex); + if (ret) + return ret; + + IWL_DEBUG_INFO(priv, "Start UP work done.\n"); + + /* Now we should be done, and the READY bit should be set. */ + if (WARN_ON(!test_bit(STATUS_READY, &priv->status))) + ret = -EIO; + + iwlagn_led_enable(priv); + + priv->is_open = 1; + IWL_DEBUG_MAC80211(priv, "leave\n"); + return 0; +} + +static void iwlagn_mac_stop(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (!priv->is_open) + return; + + priv->is_open = 0; + + mutex_lock(&priv->mutex); + iwl_down(priv); + mutex_unlock(&priv->mutex); + + iwl_cancel_deferred_work(priv); + + flush_workqueue(priv->workqueue); + + /* User space software may expect getting rfkill changes + * even if interface is down, trans->down will leave the RF + * kill interrupt enabled + */ + iwl_trans_stop_hw(priv->trans, false); + + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_gtk_rekey_data *data) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + if (iwlwifi_mod_params.sw_crypto) + return; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif) + goto out; + + memcpy(priv->kek, data->kek, NL80211_KEK_LEN); + memcpy(priv->kck, data->kck, NL80211_KCK_LEN); + priv->replay_ctr = + cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr)); + priv->have_rekey_data = true; + + out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +#ifdef CONFIG_PM_SLEEP + +static int iwlagn_mac_suspend(struct ieee80211_hw *hw, + struct cfg80211_wowlan *wowlan) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + int ret; + + if (WARN_ON(!wowlan)) + return -EINVAL; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + /* Don't attempt WoWLAN when not associated, tear down instead. */ + if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION || + !iwl_is_associated_ctx(ctx)) { + ret = 1; + goto out; + } + + ret = iwlagn_suspend(priv, wowlan); + if (ret) + goto error; + + iwl_trans_wowlan_suspend(priv->trans); + + goto out; + + error: + priv->wowlan = false; + iwlagn_prepare_restart(priv); + ieee80211_restart_hw(priv->hw); + out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return ret; +} + +static int iwlagn_mac_resume(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct ieee80211_vif *vif; + unsigned long flags; + u32 base, status = 0xffffffff; + int ret = -EIO; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + + base = priv->device_pointers.error_event_table; + if (iwlagn_hw_valid_rtc_data_addr(base)) { + spin_lock_irqsave(&priv->trans->reg_lock, flags); + ret = iwl_grab_nic_access_silent(priv->trans); + if (likely(ret == 0)) { + iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); + status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + iwl_release_nic_access(priv->trans); + } + spin_unlock_irqrestore(&priv->trans->reg_lock, flags); + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (ret == 0) { + const struct fw_img *img; + + img = &(priv->fw->img[IWL_UCODE_WOWLAN]); + if (!priv->wowlan_sram) { + priv->wowlan_sram = + kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, + GFP_KERNEL); + } + + if (priv->wowlan_sram) + _iwl_read_targ_mem_dwords( + priv->trans, 0x800000, + priv->wowlan_sram, + img->sec[IWL_UCODE_SECTION_DATA].len / 4); + } +#endif + } + + /* we'll clear ctx->vif during iwlagn_prepare_restart() */ + vif = ctx->vif; + + priv->wowlan = false; + + iwlagn_prepare_restart(priv); + + memset((void *)&ctx->active, 0, sizeof(ctx->active)); + iwl_connection_init_rx_config(priv, ctx); + iwlagn_set_rxon_chain(priv, ctx); + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + ieee80211_resume_disconnect(vif); + + return 1; +} + +static void iwlagn_mac_set_wakeup(struct ieee80211_hw *hw, bool enabled) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + device_set_wakeup_enable(priv->trans->dev, enabled); +} +#endif + +static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, + ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); + + if (iwlagn_tx_skb(priv, skb)) + dev_kfree_skb_any(skb); +} + +static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key); +} + +static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + struct iwl_rxon_context *ctx = vif_priv->ctx; + int ret; + bool is_default_wep_key = false; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (iwlwifi_mod_params.sw_crypto) { + IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + /* fall through */ + case WLAN_CIPHER_SUITE_CCMP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + break; + default: + break; + } + + /* + * We could program these keys into the hardware as well, but we + * don't expect much multicast traffic in IBSS and having keys + * for more stations is probably more useful. + * + * Mark key TX-only and return 0. + */ + if (vif->type == NL80211_IFTYPE_ADHOC && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + key->hw_key_idx = WEP_INVALID_OFFSET; + return 0; + } + + /* If they key was TX-only, accept deletion */ + if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET) + return 0; + + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + + BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT); + + /* + * If we are getting WEP group key and we didn't receive any key mapping + * so far, we are in legacy wep mode (group key only), otherwise we are + * in 1X mode. + * In legacy wep mode, we use another host command to the uCode. + */ + if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { + if (cmd == SET_KEY) + is_default_wep_key = !ctx->key_mapping_keys; + else + is_default_wep_key = + key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT; + } + + + switch (cmd) { + case SET_KEY: + if (is_default_wep_key) { + ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key); + break; + } + ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta); + if (ret) { + /* + * can't add key for RX, but we don't need it + * in the device for TX so still return 0 + */ + ret = 0; + key->hw_key_idx = WEP_INVALID_OFFSET; + } + + IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); + break; + case DISABLE_KEY: + if (is_default_wep_key) + ret = iwl_remove_default_wep_key(priv, ctx, key); + else + ret = iwl_remove_dynamic_key(priv, ctx, key, sta); + + IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return ret; +} + +static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, + u8 buf_size) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + int ret = -EINVAL; + struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; + + IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", + sta->addr, tid); + + if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)) + return -EACCES; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + switch (action) { + case IEEE80211_AMPDU_RX_START: + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) + break; + IWL_DEBUG_HT(priv, "start Rx\n"); + ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); + break; + case IEEE80211_AMPDU_RX_STOP: + IWL_DEBUG_HT(priv, "stop Rx\n"); + ret = iwl_sta_rx_agg_stop(priv, sta, tid); + break; + case IEEE80211_AMPDU_TX_START: + if (!priv->trans->ops->txq_enable) + break; + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) + break; + IWL_DEBUG_HT(priv, "start Tx\n"); + ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); + break; + case IEEE80211_AMPDU_TX_STOP: + IWL_DEBUG_HT(priv, "stop Tx\n"); + ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); + if ((ret == 0) && (priv->agg_tids_count > 0)) { + priv->agg_tids_count--; + IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", + priv->agg_tids_count); + } + if (!priv->agg_tids_count && + priv->hw_params.use_rts_for_aggregation) { + /* + * switch off RTS/CTS if it was previously enabled + */ + sta_priv->lq_sta.lq.general_params.flags &= + ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; + iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), + &sta_priv->lq_sta.lq, CMD_ASYNC, false); + } + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ret = iwlagn_tx_agg_oper(priv, vif, sta, tid, buf_size); + break; + } + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + return ret; +} + +static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + bool is_ap = vif->type == NL80211_IFTYPE_STATION; + int ret; + u8 sta_id; + + IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", + sta->addr); + sta_priv->sta_id = IWL_INVALID_STATION; + + atomic_set(&sta_priv->pending_frames, 0); + if (vif->type == NL80211_IFTYPE_AP) + sta_priv->client = true; + + ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr, + is_ap, sta, &sta_id); + if (ret) { + IWL_ERR(priv, "Unable to add station %pM (%d)\n", + sta->addr, ret); + /* Should we return success if return code is EEXIST ? */ + return ret; + } + + sta_priv->sta_id = sta_id; + + return 0; +} + +static int iwlagn_mac_sta_remove(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + int ret; + + IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", sta->addr); + + if (vif->type == NL80211_IFTYPE_STATION) { + /* + * Station will be removed from device when the RXON + * is set to unassociated -- just deactivate it here + * to avoid re-programming it. + */ + ret = 0; + iwl_deactivate_station(priv, sta_priv->sta_id, sta->addr); + } else { + ret = iwl_remove_station(priv, sta_priv->sta_id, sta->addr); + if (ret) + IWL_DEBUG_QUIET_RFKILL(priv, + "Error removing station %pM\n", sta->addr); + } + return ret; +} + +static int iwlagn_mac_sta_state(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + enum ieee80211_sta_state old_state, + enum ieee80211_sta_state new_state) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + enum { + NONE, ADD, REMOVE, HT_RATE_INIT, ADD_RATE_INIT, + } op = NONE; + int ret; + + IWL_DEBUG_MAC80211(priv, "station %pM state change %d->%d\n", + sta->addr, old_state, new_state); + + mutex_lock(&priv->mutex); + if (vif->type == NL80211_IFTYPE_STATION) { + if (old_state == IEEE80211_STA_NOTEXIST && + new_state == IEEE80211_STA_NONE) + op = ADD; + else if (old_state == IEEE80211_STA_NONE && + new_state == IEEE80211_STA_NOTEXIST) + op = REMOVE; + else if (old_state == IEEE80211_STA_AUTH && + new_state == IEEE80211_STA_ASSOC) + op = HT_RATE_INIT; + } else { + if (old_state == IEEE80211_STA_AUTH && + new_state == IEEE80211_STA_ASSOC) + op = ADD_RATE_INIT; + else if (old_state == IEEE80211_STA_ASSOC && + new_state == IEEE80211_STA_AUTH) + op = REMOVE; + } + + switch (op) { + case ADD: + ret = iwlagn_mac_sta_add(hw, vif, sta); + if (ret) + break; + /* + * Clear the in-progress flag, the AP station entry was added + * but we'll initialize LQ only when we've associated (which + * would also clear the in-progress flag). This is necessary + * in case we never initialize LQ because association fails. + */ + spin_lock_bh(&priv->sta_lock); + priv->stations[iwl_sta_id(sta)].used &= + ~IWL_STA_UCODE_INPROGRESS; + spin_unlock_bh(&priv->sta_lock); + break; + case REMOVE: + ret = iwlagn_mac_sta_remove(hw, vif, sta); + break; + case ADD_RATE_INIT: + ret = iwlagn_mac_sta_add(hw, vif, sta); + if (ret) + break; + /* Initialize rate scaling */ + IWL_DEBUG_INFO(priv, + "Initializing rate scaling for station %pM\n", + sta->addr); + iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); + ret = 0; + break; + case HT_RATE_INIT: + /* Initialize rate scaling */ + ret = iwl_sta_update_ht(priv, vif_priv->ctx, sta); + if (ret) + break; + IWL_DEBUG_INFO(priv, + "Initializing rate scaling for station %pM\n", + sta->addr); + iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); + ret = 0; + break; + default: + ret = 0; + break; + } + + /* + * mac80211 might WARN if we fail, but due the way we + * (badly) handle hard rfkill, we might fail here + */ + if (iwl_is_rfkill(priv)) + ret = 0; + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return ret; +} + +static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, + struct ieee80211_channel_switch *ch_switch) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_channel *channel = ch_switch->channel; + struct iwl_ht_config *ht_conf = &priv->current_ht_config; + /* + * MULTI-FIXME + * When we add support for multiple interfaces, we need to + * revisit this. The channel switch command in the device + * only affects the BSS context, but what does that really + * mean? And what if we get a CSA on the second interface? + * This needs a lot of work. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + u16 ch; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + mutex_lock(&priv->mutex); + + if (iwl_is_rfkill(priv)) + goto out; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status) || + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + goto out; + + if (!iwl_is_associated_ctx(ctx)) + goto out; + + if (!priv->lib->set_channel_switch) + goto out; + + ch = channel->hw_value; + if (le16_to_cpu(ctx->active.channel) == ch) + goto out; + + priv->current_ht_config.smps = conf->smps_mode; + + /* Configure HT40 channels */ + ctx->ht.enabled = conf_is_ht(conf); + if (ctx->ht.enabled) + iwlagn_config_ht40(conf, ctx); + else + ctx->ht.is_40mhz = false; + + if ((le16_to_cpu(ctx->staging.channel) != ch)) + ctx->staging.flags = 0; + + iwl_set_rxon_channel(priv, channel, ctx); + iwl_set_rxon_ht(priv, ht_conf); + iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif); + + /* + * at this point, staging_rxon has the + * configuration for channel switch + */ + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); + if (priv->lib->set_channel_switch(priv, ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } + +out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) +{ + /* + * MULTI-FIXME + * See iwlagn_mac_channel_switch. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + ieee80211_chswitch_done(ctx->vif, is_success); +} + +static void iwlagn_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + __le32 filter_or = 0, filter_nand = 0; + struct iwl_rxon_context *ctx; + +#define CHK(test, flag) do { \ + if (*total_flags & (test)) \ + filter_or |= (flag); \ + else \ + filter_nand |= (flag); \ + } while (0) + + IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); + + CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); + /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ + CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); + CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); + +#undef CHK + + mutex_lock(&priv->mutex); + + for_each_context(priv, ctx) { + ctx->staging.filter_flags &= ~filter_nand; + ctx->staging.filter_flags |= filter_or; + + /* + * Not committing directly because hardware can perform a scan, + * but we'll eventually commit the filter flags change anyway. + */ + } + + mutex_unlock(&priv->mutex); + + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in iwl_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + +static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n"); + goto done; + } + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n"); + goto done; + } + + /* + * mac80211 will not push any more frames for transmit + * until the flush is completed + */ + if (drop) { + IWL_DEBUG_MAC80211(priv, "send flush command\n"); + if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { + IWL_ERR(priv, "flush request fail\n"); + goto done; + } + } + IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); + iwl_trans_wait_tx_queue_empty(priv->trans); +done: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw, + struct ieee80211_channel *channel, + enum nl80211_channel_type channel_type, + int duration) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; + int err = 0; + + if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN))) + return -EOPNOTSUPP; + + if (!(ctx->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT))) + return -EOPNOTSUPP; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + /* mac80211 should not scan while ROC or ROC while scanning */ + if (WARN_ON_ONCE(priv->scan_type != IWL_SCAN_RADIO_RESET)) { + err = -EBUSY; + goto out; + } + + iwl_scan_cancel_timeout(priv, 100); + + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + err = -EBUSY; + goto out; + } + } + + priv->hw_roc_channel = channel; + priv->hw_roc_chantype = channel_type; + /* convert from ms to TU */ + priv->hw_roc_duration = DIV_ROUND_UP(1000 * duration, 1024); + priv->hw_roc_start_notified = false; + cancel_delayed_work(&priv->hw_roc_disable_work); + + if (!ctx->is_active) { + static const struct iwl_qos_info default_qos_data = { + .def_qos_parm = { + .ac[0] = { + .cw_min = cpu_to_le16(3), + .cw_max = cpu_to_le16(7), + .aifsn = 2, + .edca_txop = cpu_to_le16(1504), + }, + .ac[1] = { + .cw_min = cpu_to_le16(7), + .cw_max = cpu_to_le16(15), + .aifsn = 2, + .edca_txop = cpu_to_le16(3008), + }, + .ac[2] = { + .cw_min = cpu_to_le16(15), + .cw_max = cpu_to_le16(1023), + .aifsn = 3, + }, + .ac[3] = { + .cw_min = cpu_to_le16(15), + .cw_max = cpu_to_le16(1023), + .aifsn = 7, + }, + }, + }; + + ctx->is_active = true; + ctx->qos_data = default_qos_data; + ctx->staging.dev_type = RXON_DEV_TYPE_P2P; + memcpy(ctx->staging.node_addr, + priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, + ETH_ALEN); + memcpy(ctx->staging.bssid_addr, + priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, + ETH_ALEN); + err = iwlagn_commit_rxon(priv, ctx); + if (err) + goto out; + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK | + RXON_FILTER_PROMISC_MSK | + RXON_FILTER_CTL2HOST_MSK; + + err = iwlagn_commit_rxon(priv, ctx); + if (err) { + iwlagn_disable_roc(priv); + goto out; + } + priv->hw_roc_setup = true; + } + + err = iwl_scan_initiate(priv, ctx->vif, IWL_SCAN_ROC, channel->band); + if (err) + iwlagn_disable_roc(priv); + + out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return err; +} + +static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN))) + return -EOPNOTSUPP; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, priv->hw_roc_duration); + iwlagn_disable_roc(priv); + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return 0; +} + +static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, + enum ieee80211_rssi_event rssi_event) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + IWL_DEBUG_MAC80211(priv, "enter\n"); + mutex_lock(&priv->mutex); + + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + if (rssi_event == RSSI_EVENT_LOW) + priv->bt_enable_pspoll = true; + else if (rssi_event == RSSI_EVENT_HIGH) + priv->bt_enable_pspoll = false; + + iwlagn_send_advance_bt_config(priv); + } else { + IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled," + "ignoring RSSI callback\n"); + } + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +static int iwlagn_mac_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, bool set) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + queue_work(priv->workqueue, &priv->beacon_update); + + return 0; +} + +static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + struct iwl_rxon_context *ctx = vif_priv->ctx; + int q; + + if (WARN_ON(!ctx)) + return -EINVAL; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); + return -EIO; + } + + if (queue >= AC_NUM) { + IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); + return 0; + } + + q = AC_NUM - 1 - queue; + + mutex_lock(&priv->mutex); + + ctx->qos_data.def_qos_parm.ac[q].cw_min = + cpu_to_le16(params->cw_min); + ctx->qos_data.def_qos_parm.ac[q].cw_max = + cpu_to_le16(params->cw_max); + ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; + ctx->qos_data.def_qos_parm.ac[q].edca_txop = + cpu_to_le16((params->txop * 32)); + + ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0; + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211(priv, "leave\n"); + return 0; +} + +static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + + return priv->ibss_manager == IWL_IBSS_MANAGER; +} + +static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + iwl_connection_init_rx_config(priv, ctx); + + iwlagn_set_rxon_chain(priv, ctx); + + return iwlagn_commit_rxon(priv, ctx); +} + +static int iwl_setup_interface(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + struct ieee80211_vif *vif = ctx->vif; + int err, ac; + + lockdep_assert_held(&priv->mutex); + + /* + * This variable will be correct only when there's just + * a single context, but all code using it is for hardware + * that supports only one context. + */ + priv->iw_mode = vif->type; + + ctx->is_active = true; + + err = iwl_set_mode(priv, ctx); + if (err) { + if (!ctx->always_active) + ctx->is_active = false; + return err; + } + + if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist && + vif->type == NL80211_IFTYPE_ADHOC) { + /* + * pretend to have high BT traffic as long as we + * are operating in IBSS mode, as this will cause + * the rate scaling etc. to behave as intended. + */ + priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH; + } + + /* set up queue mappings */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + vif->hw_queue[ac] = ctx->ac_to_queue[ac]; + + if (vif->type == NL80211_IFTYPE_AP) + vif->cab_queue = ctx->mcast_queue; + else + vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; + + return 0; +} + +static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + struct iwl_rxon_context *tmp, *ctx = NULL; + int err; + enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); + bool reset = false; + + IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", + viftype, vif->addr); + + cancel_delayed_work_sync(&priv->hw_roc_disable_work); + + mutex_lock(&priv->mutex); + + iwlagn_disable_roc(priv); + + if (!iwl_is_ready_rf(priv)) { + IWL_WARN(priv, "Try to add interface when device not ready\n"); + err = -EINVAL; + goto out; + } + + for_each_context(priv, tmp) { + u32 possible_modes = + tmp->interface_modes | tmp->exclusive_interface_modes; + + if (tmp->vif) { + /* On reset we need to add the same interface again */ + if (tmp->vif == vif) { + reset = true; + ctx = tmp; + break; + } + + /* check if this busy context is exclusive */ + if (tmp->exclusive_interface_modes & + BIT(tmp->vif->type)) { + err = -EINVAL; + goto out; + } + continue; + } + + if (!(possible_modes & BIT(viftype))) + continue; + + /* have maybe usable context w/o interface */ + ctx = tmp; + break; + } + + if (!ctx) { + err = -EOPNOTSUPP; + goto out; + } + + vif_priv->ctx = ctx; + ctx->vif = vif; + + err = iwl_setup_interface(priv, ctx); + if (!err || reset) + goto out; + + ctx->vif = NULL; + priv->iw_mode = NL80211_IFTYPE_STATION; + out: + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211(priv, "leave\n"); + return err; +} + +static void iwl_teardown_interface(struct iwl_priv *priv, + struct ieee80211_vif *vif, + bool mode_change) +{ + struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + + lockdep_assert_held(&priv->mutex); + + if (priv->scan_vif == vif) { + iwl_scan_cancel_timeout(priv, 200); + iwl_force_scan_end(priv); + } + + if (!mode_change) { + iwl_set_mode(priv, ctx); + if (!ctx->always_active) + ctx->is_active = false; + } + + /* + * When removing the IBSS interface, overwrite the + * BT traffic load with the stored one from the last + * notification, if any. If this is a device that + * doesn't implement this, this has no effect since + * both values are the same and zero. + */ + if (vif->type == NL80211_IFTYPE_ADHOC) + priv->bt_traffic_load = priv->last_bt_traffic_load; +} + +static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + mutex_lock(&priv->mutex); + + if (WARN_ON(ctx->vif != vif)) { + struct iwl_rxon_context *tmp; + IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif); + for_each_context(priv, tmp) + IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n", + tmp->ctxid, tmp, tmp->vif); + } + ctx->vif = NULL; + + iwl_teardown_interface(priv, vif, false); + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211(priv, "leave\n"); + +} + +static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum nl80211_iftype newtype, bool newp2p) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx, *tmp; + enum nl80211_iftype newviftype = newtype; + u32 interface_modes; + int err; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + newtype = ieee80211_iftype_p2p(newtype, newp2p); + + mutex_lock(&priv->mutex); + + ctx = iwl_rxon_ctx_from_vif(vif); + + /* + * To simplify this code, only support changes on the + * BSS context. The PAN context is usually reassigned + * by creating/removing P2P interfaces anyway. + */ + if (ctx->ctxid != IWL_RXON_CTX_BSS) { + err = -EBUSY; + goto out; + } + + if (!ctx->vif || !iwl_is_ready_rf(priv)) { + /* + * Huh? But wait ... this can maybe happen when + * we're in the middle of a firmware restart! + */ + err = -EBUSY; + goto out; + } + + /* Check if the switch is supported in the same context */ + interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; + if (!(interface_modes & BIT(newtype))) { + err = -EBUSY; + goto out; + } + + if (ctx->exclusive_interface_modes & BIT(newtype)) { + for_each_context(priv, tmp) { + if (ctx == tmp) + continue; + + if (!tmp->is_active) + continue; + + /* + * The current mode switch would be exclusive, but + * another context is active ... refuse the switch. + */ + err = -EBUSY; + goto out; + } + } + + /* success */ + iwl_teardown_interface(priv, vif, true); + vif->type = newviftype; + vif->p2p = newp2p; + err = iwl_setup_interface(priv, ctx); + WARN_ON(err); + /* + * We've switched internally, but submitting to the + * device may have failed for some reason. Mask this + * error, because otherwise mac80211 will not switch + * (and set the interface type back) and we'll be + * out of sync with it. + */ + err = 0; + + out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return err; +} + +static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + int ret; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (req->n_channels == 0) + return -EINVAL; + + mutex_lock(&priv->mutex); + + /* + * If an internal scan is in progress, just set + * up the scan_request as per above. + */ + if (priv->scan_type != IWL_SCAN_NORMAL) { + IWL_DEBUG_SCAN(priv, + "SCAN request during internal scan - defer\n"); + priv->scan_request = req; + priv->scan_vif = vif; + ret = 0; + } else { + priv->scan_request = req; + priv->scan_vif = vif; + /* + * mac80211 will only ask for one band at a time + * so using channels[0] here is ok + */ + ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL, + req->channels[0]->band); + if (ret) { + priv->scan_request = NULL; + priv->scan_vif = NULL; + } + } + + IWL_DEBUG_MAC80211(priv, "leave\n"); + + mutex_unlock(&priv->mutex); + + return ret; +} + +static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) +{ + struct iwl_addsta_cmd cmd = { + .mode = STA_CONTROL_MODIFY_MSK, + .station_flags_msk = STA_FLG_PWR_SAVE_MSK, + .sta.sta_id = sta_id, + }; + + iwl_send_add_sta(priv, &cmd, CMD_ASYNC); +} + +static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + int sta_id; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + switch (cmd) { + case STA_NOTIFY_SLEEP: + WARN_ON(!sta_priv->client); + sta_priv->asleep = true; + if (atomic_read(&sta_priv->pending_frames) > 0) + ieee80211_sta_block_awake(hw, sta, true); + break; + case STA_NOTIFY_AWAKE: + WARN_ON(!sta_priv->client); + if (!sta_priv->asleep) + break; + sta_priv->asleep = false; + sta_id = iwl_sta_id(sta); + if (sta_id != IWL_INVALID_STATION) + iwl_sta_modify_ps_wake(priv, sta_id); + break; + default: + break; + } + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +struct ieee80211_ops iwlagn_hw_ops = { + .tx = iwlagn_mac_tx, + .start = iwlagn_mac_start, + .stop = iwlagn_mac_stop, +#ifdef CONFIG_PM_SLEEP + .suspend = iwlagn_mac_suspend, + .resume = iwlagn_mac_resume, + .set_wakeup = iwlagn_mac_set_wakeup, +#endif + .add_interface = iwlagn_mac_add_interface, + .remove_interface = iwlagn_mac_remove_interface, + .change_interface = iwlagn_mac_change_interface, + .config = iwlagn_mac_config, + .configure_filter = iwlagn_configure_filter, + .set_key = iwlagn_mac_set_key, + .update_tkip_key = iwlagn_mac_update_tkip_key, + .set_rekey_data = iwlagn_mac_set_rekey_data, + .conf_tx = iwlagn_mac_conf_tx, + .bss_info_changed = iwlagn_bss_info_changed, + .ampdu_action = iwlagn_mac_ampdu_action, + .hw_scan = iwlagn_mac_hw_scan, + .sta_notify = iwlagn_mac_sta_notify, + .sta_state = iwlagn_mac_sta_state, + .channel_switch = iwlagn_mac_channel_switch, + .flush = iwlagn_mac_flush, + .tx_last_beacon = iwlagn_mac_tx_last_beacon, + .remain_on_channel = iwlagn_mac_remain_on_channel, + .cancel_remain_on_channel = iwlagn_mac_cancel_remain_on_channel, + .rssi_callback = iwlagn_mac_rssi_callback, + CFG80211_TESTMODE_CMD(iwlagn_mac_testmode_cmd) + CFG80211_TESTMODE_DUMP(iwlagn_mac_testmode_dump) + .set_tim = iwlagn_mac_set_tim, +}; + +/* This function both allocates and initializes hw and priv. */ +struct ieee80211_hw *iwl_alloc_all(void) +{ + struct iwl_priv *priv; + struct iwl_op_mode *op_mode; + /* mac80211 allocates memory for this device instance, including + * space for this driver's private structure */ + struct ieee80211_hw *hw; + + hw = ieee80211_alloc_hw(sizeof(struct iwl_priv) + + sizeof(struct iwl_op_mode), &iwlagn_hw_ops); + if (!hw) + goto out; + + op_mode = hw->priv; + priv = IWL_OP_MODE_GET_DVM(op_mode); + priv->hw = hw; + +out: + return hw; +} diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c new file mode 100644 index 00000000000..84d3db5aa50 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -0,0 +1,2171 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> + +#include <net/mac80211.h> + +#include <asm/div64.h> + +#include "iwl-eeprom-read.h" +#include "iwl-eeprom-parse.h" +#include "iwl-io.h" +#include "iwl-trans.h" +#include "iwl-op-mode.h" +#include "iwl-drv.h" +#include "iwl-modparams.h" +#include "iwl-prph.h" + +#include "dev.h" +#include "calib.h" +#include "agn.h" + + +/****************************************************************************** + * + * module boiler plate + * + ******************************************************************************/ + +/* + * module name, copyright, version, etc. + */ +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" + +#ifdef CONFIG_IWLWIFI_DEBUG +#define VD "d" +#else +#define VD +#endif + +#define DRV_VERSION IWLWIFI_VERSION VD + + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); +MODULE_LICENSE("GPL"); + +static const struct iwl_op_mode_ops iwl_dvm_ops; + +void iwl_update_chain_flags(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + + for_each_context(priv, ctx) { + iwlagn_set_rxon_chain(priv, ctx); + if (ctx->active.rx_chain != ctx->staging.rx_chain) + iwlagn_commit_rxon(priv, ctx); + } +} + +/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ +static void iwl_set_beacon_tim(struct iwl_priv *priv, + struct iwl_tx_beacon_cmd *tx_beacon_cmd, + u8 *beacon, u32 frame_size) +{ + u16 tim_idx; + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; + + /* + * The index is relative to frame start but we start looking at the + * variable-length part of the beacon. + */ + tim_idx = mgmt->u.beacon.variable - beacon; + + /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ + while ((tim_idx < (frame_size - 2)) && + (beacon[tim_idx] != WLAN_EID_TIM)) + tim_idx += beacon[tim_idx+1] + 2; + + /* If TIM field was found, set variables */ + if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { + tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); + tx_beacon_cmd->tim_size = beacon[tim_idx+1]; + } else + IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); +} + +int iwlagn_send_beacon_cmd(struct iwl_priv *priv) +{ + struct iwl_tx_beacon_cmd *tx_beacon_cmd; + struct iwl_host_cmd cmd = { + .id = REPLY_TX_BEACON, + .flags = CMD_SYNC, + }; + struct ieee80211_tx_info *info; + u32 frame_size; + u32 rate_flags; + u32 rate; + + /* + * We have to set up the TX command, the TX Beacon command, and the + * beacon contents. + */ + + lockdep_assert_held(&priv->mutex); + + if (!priv->beacon_ctx) { + IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); + return 0; + } + + if (WARN_ON(!priv->beacon_skb)) + return -EINVAL; + + /* Allocate beacon command */ + if (!priv->beacon_cmd) + priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL); + tx_beacon_cmd = priv->beacon_cmd; + if (!tx_beacon_cmd) + return -ENOMEM; + + frame_size = priv->beacon_skb->len; + + /* Set up TX command fields */ + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; + + /* Set up TX beacon command fields */ + iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data, + frame_size); + + /* Set up packet rate and flags */ + info = IEEE80211_SKB_CB(priv->beacon_skb); + + /* + * Let's set up the rate at least somewhat correctly; + * it will currently not actually be used by the uCode, + * it uses the broadcast station's rate instead. + */ + if (info->control.rates[0].idx < 0 || + info->control.rates[0].flags & IEEE80211_TX_RC_MCS) + rate = 0; + else + rate = info->control.rates[0].idx; + + priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, + priv->eeprom_data->valid_tx_ant); + rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); + + /* In mac80211, rates for 5 GHz start at 0 */ + if (info->band == IEEE80211_BAND_5GHZ) + rate += IWL_FIRST_OFDM_RATE; + else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, rate_flags); + + /* Submit command */ + cmd.len[0] = sizeof(*tx_beacon_cmd); + cmd.data[0] = tx_beacon_cmd; + cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; + cmd.len[1] = frame_size; + cmd.data[1] = priv->beacon_skb->data; + cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; + + return iwl_dvm_send_cmd(priv, &cmd); +} + +static void iwl_bg_beacon_update(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, beacon_update); + struct sk_buff *beacon; + + mutex_lock(&priv->mutex); + if (!priv->beacon_ctx) { + IWL_ERR(priv, "updating beacon w/o beacon context!\n"); + goto out; + } + + if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { + /* + * The ucode will send beacon notifications even in + * IBSS mode, but we don't want to process them. But + * we need to defer the type check to here due to + * requiring locking around the beacon_ctx access. + */ + goto out; + } + + /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ + beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); + if (!beacon) { + IWL_ERR(priv, "update beacon failed -- keeping old\n"); + goto out; + } + + /* new beacon skb is allocated every time; dispose previous.*/ + dev_kfree_skb(priv->beacon_skb); + + priv->beacon_skb = beacon; + + iwlagn_send_beacon_cmd(priv); + out: + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_bt_runtime_config(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, bt_runtime_config); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* dont send host command if rf-kill is on */ + if (!iwl_is_ready_rf(priv)) + return; + iwlagn_send_advance_bt_config(priv); +} + +static void iwl_bg_bt_full_concurrency(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, bt_full_concurrency); + struct iwl_rxon_context *ctx; + + mutex_lock(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + goto out; + + /* dont send host command if rf-kill is on */ + if (!iwl_is_ready_rf(priv)) + goto out; + + IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", + priv->bt_full_concurrent ? + "full concurrency" : "3-wire"); + + /* + * LQ & RXON updated cmds must be sent before BT Config cmd + * to avoid 3-wire collisions + */ + for_each_context(priv, ctx) { + iwlagn_set_rxon_chain(priv, ctx); + iwlagn_commit_rxon(priv, ctx); + } + + iwlagn_send_advance_bt_config(priv); +out: + mutex_unlock(&priv->mutex); +} + +int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) +{ + struct iwl_statistics_cmd statistics_cmd = { + .configuration_flags = + clear ? IWL_STATS_CONF_CLEAR_STATS : 0, + }; + + if (flags & CMD_ASYNC) + return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, + CMD_ASYNC, + sizeof(struct iwl_statistics_cmd), + &statistics_cmd); + else + return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, + CMD_SYNC, + sizeof(struct iwl_statistics_cmd), + &statistics_cmd); +} + +/** + * iwl_bg_statistics_periodic - Timer callback to queue statistics + * + * This callback is provided in order to send a statistics request. + * + * This timer function is continually reset to execute within + * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION + * was received. We need to ensure we receive the statistics in order + * to update the temperature used for calibrating the TXPOWER. + */ +static void iwl_bg_statistics_periodic(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* dont send host command if rf-kill is on */ + if (!iwl_is_ready_rf(priv)) + return; + + iwl_send_statistics_request(priv, CMD_ASYNC, false); +} + + +static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, + u32 start_idx, u32 num_events, + u32 capacity, u32 mode) +{ + u32 i; + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + unsigned long reg_flags; + + if (mode == 0) + ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); + else + ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); + + /* Make sure device is powered up for SRAM reads */ + spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); + if (unlikely(!iwl_grab_nic_access(priv->trans))) { + spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); + return; + } + + /* Set starting address; reads will auto-increment */ + iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr); + + /* + * Refuse to read more than would have fit into the log from + * the current start_idx. This used to happen due to the race + * described below, but now WARN because the code below should + * prevent it from happening here. + */ + if (WARN_ON(num_events > capacity - start_idx)) + num_events = capacity - start_idx; + + /* + * "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. + */ + for (i = 0; i < num_events; i++) { + ev = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + time = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + if (mode == 0) { + trace_iwlwifi_dev_ucode_cont_event( + priv->trans->dev, 0, time, ev); + } else { + data = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + trace_iwlwifi_dev_ucode_cont_event( + priv->trans->dev, time, data, ev); + } + } + /* Allow device to power down */ + iwl_release_nic_access(priv->trans); + spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); +} + +static void iwl_continuous_event_trace(struct iwl_priv *priv) +{ + u32 capacity; /* event log capacity in # entries */ + struct { + u32 capacity; + u32 mode; + u32 wrap_counter; + u32 write_counter; + } __packed read; + u32 base; /* SRAM byte address of event log header */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + + base = priv->device_pointers.log_event_table; + if (iwlagn_hw_valid_rtc_data_addr(base)) { + iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read)); + capacity = read.capacity; + mode = read.mode; + num_wraps = read.wrap_counter; + next_entry = read.write_counter; + } else + return; + + /* + * Unfortunately, the uCode doesn't use temporary variables. + * Therefore, it can happen that we read next_entry == capacity, + * which really means next_entry == 0. + */ + if (unlikely(next_entry == capacity)) + next_entry = 0; + /* + * Additionally, the uCode increases the write pointer before + * the wraps counter, so if the write pointer is smaller than + * the old write pointer (wrap occurred) but we read that no + * wrap occurred, we actually read between the next_entry and + * num_wraps update (this does happen in practice!!) -- take + * that into account by increasing num_wraps. + */ + if (unlikely(next_entry < priv->event_log.next_entry && + num_wraps == priv->event_log.num_wraps)) + num_wraps++; + + if (num_wraps == priv->event_log.num_wraps) { + iwl_print_cont_event_trace( + priv, base, priv->event_log.next_entry, + next_entry - priv->event_log.next_entry, + capacity, mode); + + priv->event_log.non_wraps_count++; + } else { + if (num_wraps - priv->event_log.num_wraps > 1) + priv->event_log.wraps_more_count++; + else + priv->event_log.wraps_once_count++; + + trace_iwlwifi_dev_ucode_wrap_event(priv->trans->dev, + num_wraps - priv->event_log.num_wraps, + next_entry, priv->event_log.next_entry); + + if (next_entry < priv->event_log.next_entry) { + iwl_print_cont_event_trace( + priv, base, priv->event_log.next_entry, + capacity - priv->event_log.next_entry, + capacity, mode); + + iwl_print_cont_event_trace( + priv, base, 0, next_entry, capacity, mode); + } else { + iwl_print_cont_event_trace( + priv, base, next_entry, + capacity - next_entry, + capacity, mode); + + iwl_print_cont_event_trace( + priv, base, 0, next_entry, capacity, mode); + } + } + + priv->event_log.num_wraps = num_wraps; + priv->event_log.next_entry = next_entry; +} + +/** + * iwl_bg_ucode_trace - Timer callback to log ucode event + * + * The timer is continually set to execute every + * UCODE_TRACE_PERIOD milliseconds after the last timer expired + * this function is to perform continuous uCode event logging operation + * if enabled + */ +static void iwl_bg_ucode_trace(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (priv->event_log.ucode_trace) { + iwl_continuous_event_trace(priv); + /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ + mod_timer(&priv->ucode_trace, + jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); + } +} + +static void iwl_bg_tx_flush(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, tx_flush); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* do nothing if rf-kill is on */ + if (!iwl_is_ready_rf(priv)) + return; + + IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); + iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); +} + +/* + * queue/FIFO/AC mapping definitions + */ + +static const u8 iwlagn_bss_ac_to_fifo[] = { + IWL_TX_FIFO_VO, + IWL_TX_FIFO_VI, + IWL_TX_FIFO_BE, + IWL_TX_FIFO_BK, +}; + +static const u8 iwlagn_bss_ac_to_queue[] = { + 0, 1, 2, 3, +}; + +static const u8 iwlagn_pan_ac_to_fifo[] = { + IWL_TX_FIFO_VO_IPAN, + IWL_TX_FIFO_VI_IPAN, + IWL_TX_FIFO_BE_IPAN, + IWL_TX_FIFO_BK_IPAN, +}; + +static const u8 iwlagn_pan_ac_to_queue[] = { + 7, 6, 5, 4, +}; + +static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags) +{ + int i; + + /* + * The default context is always valid, + * the PAN context depends on uCode. + */ + priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); + if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) + priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN); + + for (i = 0; i < NUM_IWL_RXON_CTX; i++) + priv->contexts[i].ctxid = i; + + priv->contexts[IWL_RXON_CTX_BSS].always_active = true; + priv->contexts[IWL_RXON_CTX_BSS].is_active = true; + priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; + priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; + priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; + priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; + priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; + priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; + priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID; + priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = + BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MONITOR); + priv->contexts[IWL_RXON_CTX_BSS].interface_modes = + BIT(NL80211_IFTYPE_STATION); + priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; + priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; + priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; + priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; + memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue, + iwlagn_bss_ac_to_queue, sizeof(iwlagn_bss_ac_to_queue)); + memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo, + iwlagn_bss_ac_to_fifo, sizeof(iwlagn_bss_ac_to_fifo)); + + priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; + priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = + REPLY_WIPAN_RXON_TIMING; + priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = + REPLY_WIPAN_RXON_ASSOC; + priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; + priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; + priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; + priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; + priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; + priv->contexts[IWL_RXON_CTX_PAN].interface_modes = + BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); + + if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P) + priv->contexts[IWL_RXON_CTX_PAN].interface_modes |= + BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO); + + priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; + priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; + priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; + memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue, + iwlagn_pan_ac_to_queue, sizeof(iwlagn_pan_ac_to_queue)); + memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo, + iwlagn_pan_ac_to_fifo, sizeof(iwlagn_pan_ac_to_fifo)); + priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE; + + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); +} + +static void iwl_rf_kill_ct_config(struct iwl_priv *priv) +{ + struct iwl_ct_kill_config cmd; + struct iwl_ct_kill_throttling_config adv_cmd; + int ret = 0; + + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + + priv->thermal_throttle.ct_kill_toggle = false; + + if (priv->cfg->base_params->support_ct_kill_exit) { + adv_cmd.critical_temperature_enter = + cpu_to_le32(priv->hw_params.ct_kill_threshold); + adv_cmd.critical_temperature_exit = + cpu_to_le32(priv->hw_params.ct_kill_exit_threshold); + + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_CT_KILL_CONFIG_CMD, + CMD_SYNC, sizeof(adv_cmd), &adv_cmd); + if (ret) + IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); + else + IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " + "succeeded, critical temperature enter is %d," + "exit is %d\n", + priv->hw_params.ct_kill_threshold, + priv->hw_params.ct_kill_exit_threshold); + } else { + cmd.critical_temperature_R = + cpu_to_le32(priv->hw_params.ct_kill_threshold); + + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_CT_KILL_CONFIG_CMD, + CMD_SYNC, sizeof(cmd), &cmd); + if (ret) + IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); + else + IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " + "succeeded, " + "critical temperature is %d\n", + priv->hw_params.ct_kill_threshold); + } +} + +static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) +{ + struct iwl_calib_cfg_cmd calib_cfg_cmd; + struct iwl_host_cmd cmd = { + .id = CALIBRATION_CFG_CMD, + .len = { sizeof(struct iwl_calib_cfg_cmd), }, + .data = { &calib_cfg_cmd, }, + }; + + memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); + calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); + + return iwl_dvm_send_cmd(priv, &cmd); +} + + +static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) +{ + struct iwl_tx_ant_config_cmd tx_ant_cmd = { + .valid = cpu_to_le32(valid_tx_ant), + }; + + if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) { + IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); + return iwl_dvm_send_cmd_pdu(priv, + TX_ANT_CONFIGURATION_CMD, + CMD_SYNC, + sizeof(struct iwl_tx_ant_config_cmd), + &tx_ant_cmd); + } else { + IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); + return -EOPNOTSUPP; + } +} + +static void iwl_send_bt_config(struct iwl_priv *priv) +{ + struct iwl_bt_cmd bt_cmd = { + .lead_time = BT_LEAD_TIME_DEF, + .max_kill = BT_MAX_KILL_DEF, + .kill_ack_mask = 0, + .kill_cts_mask = 0, + }; + + if (!iwlwifi_mod_params.bt_coex_active) + bt_cmd.flags = BT_COEX_DISABLE; + else + bt_cmd.flags = BT_COEX_ENABLE; + + priv->bt_enable_flag = bt_cmd.flags; + IWL_DEBUG_INFO(priv, "BT coex %s\n", + (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); + + if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, + CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd)) + IWL_ERR(priv, "failed to send BT Coex Config\n"); +} + +/** + * iwl_alive_start - called after REPLY_ALIVE notification received + * from protocol/runtime uCode (initialization uCode's + * Alive gets handled by iwl_init_alive_start()). + */ +int iwl_alive_start(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); + + /* After the ALIVE response, we can send host commands to the uCode */ + set_bit(STATUS_ALIVE, &priv->status); + + if (iwl_is_rfkill(priv)) + return -ERFKILL; + + if (priv->event_log.ucode_trace) { + /* start collecting data now */ + mod_timer(&priv->ucode_trace, jiffies); + } + + /* download priority table before any calibration request */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + /* Configure Bluetooth device coexistence support */ + if (priv->cfg->bt_params->bt_sco_disable) + priv->bt_enable_pspoll = false; + else + priv->bt_enable_pspoll = true; + + priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; + priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; + priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; + iwlagn_send_advance_bt_config(priv); + priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; + priv->cur_rssi_ctx = NULL; + + iwl_send_prio_tbl(priv); + + /* FIXME: w/a to force change uCode BT state machine */ + ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, + BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); + if (ret) + return ret; + ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, + BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); + if (ret) + return ret; + } else { + /* + * default is 2-wire BT coexexistence support + */ + iwl_send_bt_config(priv); + } + + /* + * Perform runtime calibrations, including DC calibration. + */ + iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX); + + ieee80211_wake_queues(priv->hw); + + /* Configure Tx antenna selection based on H/W config */ + iwlagn_send_tx_ant_config(priv, priv->eeprom_data->valid_tx_ant); + + if (iwl_is_associated_ctx(ctx) && !priv->wowlan) { + struct iwl_rxon_cmd *active_rxon = + (struct iwl_rxon_cmd *)&ctx->active; + /* apply any changes in staging */ + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + } else { + struct iwl_rxon_context *tmp; + /* Initialize our rx_config data */ + for_each_context(priv, tmp) + iwl_connection_init_rx_config(priv, tmp); + + iwlagn_set_rxon_chain(priv, ctx); + } + + if (!priv->wowlan) { + /* WoWLAN ucode will not reply in the same way, skip it */ + iwl_reset_run_time_calib(priv); + } + + set_bit(STATUS_READY, &priv->status); + + /* Configure the adapter for unassociated operation */ + ret = iwlagn_commit_rxon(priv, ctx); + if (ret) + return ret; + + /* At this point, the NIC is initialized and operational */ + iwl_rf_kill_ct_config(priv); + + IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); + + return iwl_power_update_mode(priv, true); +} + +/** + * iwl_clear_driver_stations - clear knowledge of all stations from driver + * @priv: iwl priv struct + * + * This is called during iwl_down() to make sure that in the case + * we're coming there from a hardware restart mac80211 will be + * able to reconfigure stations -- if we're getting there in the + * normal down flow then the stations will already be cleared. + */ +static void iwl_clear_driver_stations(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + + spin_lock_bh(&priv->sta_lock); + memset(priv->stations, 0, sizeof(priv->stations)); + priv->num_stations = 0; + + priv->ucode_key_table = 0; + + for_each_context(priv, ctx) { + /* + * Remove all key information that is not stored as part + * of station information since mac80211 may not have had + * a chance to remove all the keys. When device is + * reconfigured by mac80211 after an error all keys will + * be reconfigured. + */ + memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys)); + ctx->key_mapping_keys = 0; + } + + spin_unlock_bh(&priv->sta_lock); +} + +void iwl_down(struct iwl_priv *priv) +{ + int exit_pending; + + IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); + + lockdep_assert_held(&priv->mutex); + + iwl_scan_cancel_timeout(priv, 200); + + /* + * If active, scanning won't cancel it, so say it expired. + * No race since we hold the mutex here and a new one + * can't come in at this time. + */ + ieee80211_remain_on_channel_expired(priv->hw); + + exit_pending = + test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); + + iwl_clear_ucode_stations(priv, NULL); + iwl_dealloc_bcast_stations(priv); + iwl_clear_driver_stations(priv); + + /* reset BT coex data */ + priv->bt_status = 0; + priv->cur_rssi_ctx = NULL; + priv->bt_is_sco = 0; + if (priv->cfg->bt_params) + priv->bt_traffic_load = + priv->cfg->bt_params->bt_init_traffic_load; + else + priv->bt_traffic_load = 0; + priv->bt_full_concurrent = false; + priv->bt_ci_compliance = 0; + + /* Wipe out the EXIT_PENDING status bit if we are not actually + * exiting the module */ + if (!exit_pending) + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + priv->ucode_loaded = false; + iwl_trans_stop_device(priv->trans); + + /* Set num_aux_in_flight must be done after the transport is stopped */ + atomic_set(&priv->num_aux_in_flight, 0); + + /* Clear out all status bits but a few that are stable across reset */ + priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_FW_ERROR, &priv->status) << + STATUS_FW_ERROR | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + + dev_kfree_skb(priv->beacon_skb); + priv->beacon_skb = NULL; +} + +/***************************************************************************** + * + * Workqueue callbacks + * + *****************************************************************************/ + +static void iwl_bg_run_time_calib_work(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, + run_time_calib_work); + + mutex_lock(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status) || + test_bit(STATUS_SCANNING, &priv->status)) { + mutex_unlock(&priv->mutex); + return; + } + + if (priv->start_calib) { + iwl_chain_noise_calibration(priv); + iwl_sensitivity_calibration(priv); + } + + mutex_unlock(&priv->mutex); +} + +void iwlagn_prepare_restart(struct iwl_priv *priv) +{ + bool bt_full_concurrent; + u8 bt_ci_compliance; + u8 bt_load; + u8 bt_status; + bool bt_is_sco; + int i; + + lockdep_assert_held(&priv->mutex); + + priv->is_open = 0; + + /* + * __iwl_down() will clear the BT status variables, + * which is correct, but when we restart we really + * want to keep them so restore them afterwards. + * + * The restart process will later pick them up and + * re-configure the hw when we reconfigure the BT + * command. + */ + bt_full_concurrent = priv->bt_full_concurrent; + bt_ci_compliance = priv->bt_ci_compliance; + bt_load = priv->bt_traffic_load; + bt_status = priv->bt_status; + bt_is_sco = priv->bt_is_sco; + + iwl_down(priv); + + priv->bt_full_concurrent = bt_full_concurrent; + priv->bt_ci_compliance = bt_ci_compliance; + priv->bt_traffic_load = bt_load; + priv->bt_status = bt_status; + priv->bt_is_sco = bt_is_sco; + + /* reset aggregation queues */ + for (i = IWLAGN_FIRST_AMPDU_QUEUE; i < IWL_MAX_HW_QUEUES; i++) + priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; + /* and stop counts */ + for (i = 0; i < IWL_MAX_HW_QUEUES; i++) + atomic_set(&priv->queue_stop_count[i], 0); + + memset(priv->agg_q_alloc, 0, sizeof(priv->agg_q_alloc)); +} + +static void iwl_bg_restart(struct work_struct *data) +{ + struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { + mutex_lock(&priv->mutex); + iwlagn_prepare_restart(priv); + mutex_unlock(&priv->mutex); + iwl_cancel_deferred_work(priv); + ieee80211_restart_hw(priv->hw); + } else { + WARN_ON(1); + } +} + + + + +void iwlagn_disable_roc(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; + + lockdep_assert_held(&priv->mutex); + + if (!priv->hw_roc_setup) + return; + + ctx->staging.dev_type = RXON_DEV_TYPE_P2P; + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + priv->hw_roc_channel = NULL; + + memset(ctx->staging.node_addr, 0, ETH_ALEN); + + iwlagn_commit_rxon(priv, ctx); + + ctx->is_active = false; + priv->hw_roc_setup = false; +} + +static void iwlagn_disable_roc_work(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, + hw_roc_disable_work.work); + + mutex_lock(&priv->mutex); + iwlagn_disable_roc(priv); + mutex_unlock(&priv->mutex); +} + +/***************************************************************************** + * + * driver setup and teardown + * + *****************************************************************************/ + +static void iwl_setup_deferred_work(struct iwl_priv *priv) +{ + priv->workqueue = create_singlethread_workqueue(DRV_NAME); + + INIT_WORK(&priv->restart, iwl_bg_restart); + INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); + INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); + INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); + INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); + INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); + INIT_DELAYED_WORK(&priv->hw_roc_disable_work, + iwlagn_disable_roc_work); + + iwl_setup_scan_deferred_work(priv); + + if (priv->cfg->bt_params) + iwlagn_bt_setup_deferred_work(priv); + + init_timer(&priv->statistics_periodic); + priv->statistics_periodic.data = (unsigned long)priv; + priv->statistics_periodic.function = iwl_bg_statistics_periodic; + + init_timer(&priv->ucode_trace); + priv->ucode_trace.data = (unsigned long)priv; + priv->ucode_trace.function = iwl_bg_ucode_trace; +} + +void iwl_cancel_deferred_work(struct iwl_priv *priv) +{ + if (priv->cfg->bt_params) + iwlagn_bt_cancel_deferred_work(priv); + + cancel_work_sync(&priv->run_time_calib_work); + cancel_work_sync(&priv->beacon_update); + + iwl_cancel_scan_deferred_work(priv); + + cancel_work_sync(&priv->bt_full_concurrency); + cancel_work_sync(&priv->bt_runtime_config); + cancel_delayed_work_sync(&priv->hw_roc_disable_work); + + del_timer_sync(&priv->statistics_periodic); + del_timer_sync(&priv->ucode_trace); +} + +static int iwl_init_drv(struct iwl_priv *priv) +{ + spin_lock_init(&priv->sta_lock); + + mutex_init(&priv->mutex); + + INIT_LIST_HEAD(&priv->calib_results); + + priv->band = IEEE80211_BAND_2GHZ; + + priv->plcp_delta_threshold = + priv->cfg->base_params->plcp_delta_threshold; + + priv->iw_mode = NL80211_IFTYPE_STATION; + priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; + priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; + priv->agg_tids_count = 0; + + priv->ucode_owner = IWL_OWNERSHIP_DRIVER; + + priv->rx_statistics_jiffies = jiffies; + + /* Choose which receivers/antennas to use */ + iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]); + + iwl_init_scan_params(priv); + + /* init bt coex */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; + priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; + priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; + priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; + priv->bt_duration = BT_DURATION_LIMIT_DEF; + priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; + } + + return 0; +} + +static void iwl_uninit_drv(struct iwl_priv *priv) +{ + kfree(priv->scan_cmd); + kfree(priv->beacon_cmd); + kfree(rcu_dereference_raw(priv->noa_data)); + iwl_calib_free_results(priv); +#ifdef CONFIG_IWLWIFI_DEBUGFS + kfree(priv->wowlan_sram); +#endif +} + +static void iwl_set_hw_params(struct iwl_priv *priv) +{ + if (priv->cfg->ht_params) + priv->hw_params.use_rts_for_aggregation = + priv->cfg->ht_params->use_rts_for_aggregation; + + /* Device-specific setup */ + priv->lib->set_hw_params(priv); +} + + + +/* show what optional capabilities we have */ +static void iwl_option_config(struct iwl_priv *priv) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n"); +#else + IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n"); +#endif + +#ifdef CONFIG_IWLWIFI_DEBUGFS + IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n"); +#else + IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n"); +#endif + +#ifdef CONFIG_IWLWIFI_DEVICE_TRACING + IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n"); +#else + IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n"); +#endif + +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE enabled\n"); +#else + IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE disabled\n"); +#endif + +#ifdef CONFIG_IWLWIFI_P2P + IWL_INFO(priv, "CONFIG_IWLWIFI_P2P enabled\n"); +#else + IWL_INFO(priv, "CONFIG_IWLWIFI_P2P disabled\n"); +#endif +} + +static int iwl_eeprom_init_hw_params(struct iwl_priv *priv) +{ + u16 radio_cfg; + + priv->eeprom_data->sku = priv->eeprom_data->sku; + + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE && + !priv->cfg->ht_params) { + IWL_ERR(priv, "Invalid 11n configuration\n"); + return -EINVAL; + } + + if (!priv->eeprom_data->sku) { + IWL_ERR(priv, "Invalid device sku\n"); + return -EINVAL; + } + + IWL_INFO(priv, "Device SKU: 0x%X\n", priv->eeprom_data->sku); + + radio_cfg = priv->eeprom_data->radio_cfg; + + priv->hw_params.tx_chains_num = + num_of_ant(priv->eeprom_data->valid_tx_ant); + if (priv->cfg->rx_with_siso_diversity) + priv->hw_params.rx_chains_num = 1; + else + priv->hw_params.rx_chains_num = + num_of_ant(priv->eeprom_data->valid_rx_ant); + + IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n", + priv->eeprom_data->valid_tx_ant, + priv->eeprom_data->valid_rx_ant); + + return 0; +} + +static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, + const struct iwl_cfg *cfg, + const struct iwl_fw *fw) +{ + struct iwl_priv *priv; + struct ieee80211_hw *hw; + struct iwl_op_mode *op_mode; + u16 num_mac; + u32 ucode_flags; + struct iwl_trans_config trans_cfg; + static const u8 no_reclaim_cmds[] = { + REPLY_RX_PHY_CMD, + REPLY_RX_MPDU_CMD, + REPLY_COMPRESSED_BA, + STATISTICS_NOTIFICATION, + REPLY_TX, + }; + int i; + + /************************ + * 1. Allocating HW data + ************************/ + hw = iwl_alloc_all(); + if (!hw) { + pr_err("%s: Cannot allocate network device\n", cfg->name); + goto out; + } + + op_mode = hw->priv; + op_mode->ops = &iwl_dvm_ops; + priv = IWL_OP_MODE_GET_DVM(op_mode); + priv->trans = trans; + priv->dev = trans->dev; + priv->cfg = cfg; + priv->fw = fw; + + switch (priv->cfg->device_family) { + case IWL_DEVICE_FAMILY_1000: + case IWL_DEVICE_FAMILY_100: + priv->lib = &iwl1000_lib; + break; + case IWL_DEVICE_FAMILY_2000: + case IWL_DEVICE_FAMILY_105: + priv->lib = &iwl2000_lib; + break; + case IWL_DEVICE_FAMILY_2030: + case IWL_DEVICE_FAMILY_135: + priv->lib = &iwl2030_lib; + break; + case IWL_DEVICE_FAMILY_5000: + priv->lib = &iwl5000_lib; + break; + case IWL_DEVICE_FAMILY_5150: + priv->lib = &iwl5150_lib; + break; + case IWL_DEVICE_FAMILY_6000: + case IWL_DEVICE_FAMILY_6005: + case IWL_DEVICE_FAMILY_6000i: + case IWL_DEVICE_FAMILY_6050: + case IWL_DEVICE_FAMILY_6150: + priv->lib = &iwl6000_lib; + break; + case IWL_DEVICE_FAMILY_6030: + priv->lib = &iwl6030_lib; + break; + default: + break; + } + + if (WARN_ON(!priv->lib)) + goto out_free_hw; + + /* + * Populate the state variables that the transport layer needs + * to know about. + */ + trans_cfg.op_mode = op_mode; + trans_cfg.no_reclaim_cmds = no_reclaim_cmds; + trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds); + trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K; + if (!iwlwifi_mod_params.wd_disable) + trans_cfg.queue_watchdog_timeout = + priv->cfg->base_params->wd_timeout; + else + trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED; + trans_cfg.command_names = iwl_dvm_cmd_strings; + trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM; + + WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE < + priv->cfg->base_params->num_of_queues); + + ucode_flags = fw->ucode_capa.flags; + +#ifndef CONFIG_IWLWIFI_P2P + ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P; +#endif + + if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) { + priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; + trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; + } else { + priv->sta_key_max_num = STA_KEY_MAX_NUM; + trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; + } + + /* Configure transport layer */ + iwl_trans_configure(priv->trans, &trans_cfg); + + /* At this point both hw and priv are allocated. */ + + SET_IEEE80211_DEV(priv->hw, priv->trans->dev); + + iwl_option_config(priv); + + IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); + + /* is antenna coupling more than 35dB ? */ + priv->bt_ant_couple_ok = + (iwlwifi_mod_params.ant_coupling > + IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? + true : false; + + /* enable/disable bt channel inhibition */ + priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce; + IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", + (priv->bt_ch_announce) ? "On" : "Off"); + + /* these spin locks will be used in apm_ops.init and EEPROM access + * we should init now + */ + spin_lock_init(&priv->statistics.lock); + + /*********************** + * 2. Read REV register + ***********************/ + IWL_INFO(priv, "Detected %s, REV=0x%X\n", + priv->cfg->name, priv->trans->hw_rev); + + if (iwl_trans_start_hw(priv->trans)) + goto out_free_hw; + + /* Read the EEPROM */ + if (iwl_read_eeprom(priv->trans, &priv->eeprom_blob, + &priv->eeprom_blob_size)) { + IWL_ERR(priv, "Unable to init EEPROM\n"); + goto out_free_hw; + } + + /* Reset chip to save power until we load uCode during "up". */ + iwl_trans_stop_hw(priv->trans, false); + + priv->eeprom_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg, + priv->eeprom_blob, + priv->eeprom_blob_size); + if (!priv->eeprom_data) + goto out_free_eeprom_blob; + + if (iwl_eeprom_check_version(priv->eeprom_data, priv->trans)) + goto out_free_eeprom; + + if (iwl_eeprom_init_hw_params(priv)) + goto out_free_eeprom; + + /* extract MAC Address */ + memcpy(priv->addresses[0].addr, priv->eeprom_data->hw_addr, ETH_ALEN); + IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); + priv->hw->wiphy->addresses = priv->addresses; + priv->hw->wiphy->n_addresses = 1; + num_mac = priv->eeprom_data->n_hw_addrs; + if (num_mac > 1) { + memcpy(priv->addresses[1].addr, priv->addresses[0].addr, + ETH_ALEN); + priv->addresses[1].addr[5]++; + priv->hw->wiphy->n_addresses++; + } + + /************************ + * 4. Setup HW constants + ************************/ + iwl_set_hw_params(priv); + + if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) { + IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN"); + ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; + /* + * if not PAN, then don't support P2P -- might be a uCode + * packaging bug or due to the eeprom check above + */ + ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P; + priv->sta_key_max_num = STA_KEY_MAX_NUM; + trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; + + /* Configure transport layer again*/ + iwl_trans_configure(priv->trans, &trans_cfg); + } + + /******************* + * 5. Setup priv + *******************/ + for (i = 0; i < IWL_MAX_HW_QUEUES; i++) { + priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; + if (i < IWLAGN_FIRST_AMPDU_QUEUE && + i != IWL_DEFAULT_CMD_QUEUE_NUM && + i != IWL_IPAN_CMD_QUEUE_NUM) + priv->queue_to_mac80211[i] = i; + atomic_set(&priv->queue_stop_count[i], 0); + } + + if (iwl_init_drv(priv)) + goto out_free_eeprom; + + /* At this point both hw and priv are initialized. */ + + /******************** + * 6. Setup services + ********************/ + iwl_setup_deferred_work(priv); + iwl_setup_rx_handlers(priv); + iwl_testmode_init(priv); + + iwl_power_initialize(priv); + iwl_tt_initialize(priv); + + snprintf(priv->hw->wiphy->fw_version, + sizeof(priv->hw->wiphy->fw_version), + "%s", fw->fw_version); + + priv->new_scan_threshold_behaviour = + !!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN); + + priv->phy_calib_chain_noise_reset_cmd = + fw->ucode_capa.standard_phy_calibration_size; + priv->phy_calib_chain_noise_gain_cmd = + fw->ucode_capa.standard_phy_calibration_size + 1; + + /* initialize all valid contexts */ + iwl_init_context(priv, ucode_flags); + + /************************************************** + * This is still part of probe() in a sense... + * + * 7. Setup and register with mac80211 and debugfs + **************************************************/ + if (iwlagn_mac_setup_register(priv, &fw->ucode_capa)) + goto out_destroy_workqueue; + + if (iwl_dbgfs_register(priv, DRV_NAME)) + IWL_ERR(priv, + "failed to create debugfs files. Ignoring error\n"); + + return op_mode; + +out_destroy_workqueue: + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + iwl_uninit_drv(priv); +out_free_eeprom_blob: + kfree(priv->eeprom_blob); +out_free_eeprom: + iwl_free_eeprom_data(priv->eeprom_data); +out_free_hw: + ieee80211_free_hw(priv->hw); +out: + op_mode = NULL; + return op_mode; +} + +static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + + IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); + + iwl_dbgfs_unregister(priv); + + iwl_testmode_free(priv); + iwlagn_mac_unregister(priv); + + iwl_tt_exit(priv); + + /*This will stop the queues, move the device to low power state */ + priv->ucode_loaded = false; + iwl_trans_stop_device(priv->trans); + + kfree(priv->eeprom_blob); + iwl_free_eeprom_data(priv->eeprom_data); + + /*netif_stop_queue(dev); */ + flush_workqueue(priv->workqueue); + + /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes + * priv->workqueue... so we can't take down the workqueue + * until now... */ + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + + iwl_uninit_drv(priv); + + dev_kfree_skb(priv->beacon_skb); + + iwl_trans_stop_hw(priv->trans, true); + ieee80211_free_hw(priv->hw); +} + +static const char * const desc_lookup_text[] = { + "OK", + "FAIL", + "BAD_PARAM", + "BAD_CHECKSUM", + "NMI_INTERRUPT_WDG", + "SYSASSERT", + "FATAL_ERROR", + "BAD_COMMAND", + "HW_ERROR_TUNE_LOCK", + "HW_ERROR_TEMPERATURE", + "ILLEGAL_CHAN_FREQ", + "VCC_NOT_STABLE", + "FH_ERROR", + "NMI_INTERRUPT_HOST", + "NMI_INTERRUPT_ACTION_PT", + "NMI_INTERRUPT_UNKNOWN", + "UCODE_VERSION_MISMATCH", + "HW_ERROR_ABS_LOCK", + "HW_ERROR_CAL_LOCK_FAIL", + "NMI_INTERRUPT_INST_ACTION_PT", + "NMI_INTERRUPT_DATA_ACTION_PT", + "NMI_TRM_HW_ER", + "NMI_INTERRUPT_TRM", + "NMI_INTERRUPT_BREAK_POINT", + "DEBUG_0", + "DEBUG_1", + "DEBUG_2", + "DEBUG_3", +}; + +static struct { char *name; u8 num; } advanced_lookup[] = { + { "NMI_INTERRUPT_WDG", 0x34 }, + { "SYSASSERT", 0x35 }, + { "UCODE_VERSION_MISMATCH", 0x37 }, + { "BAD_COMMAND", 0x38 }, + { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, + { "FATAL_ERROR", 0x3D }, + { "NMI_TRM_HW_ERR", 0x46 }, + { "NMI_INTERRUPT_TRM", 0x4C }, + { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, + { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, + { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, + { "NMI_INTERRUPT_HOST", 0x66 }, + { "NMI_INTERRUPT_ACTION_PT", 0x7C }, + { "NMI_INTERRUPT_UNKNOWN", 0x84 }, + { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, + { "ADVANCED_SYSASSERT", 0 }, +}; + +static const char *desc_lookup(u32 num) +{ + int i; + int max = ARRAY_SIZE(desc_lookup_text); + + if (num < max) + return desc_lookup_text[num]; + + max = ARRAY_SIZE(advanced_lookup) - 1; + for (i = 0; i < max; i++) { + if (advanced_lookup[i].num == num) + break; + } + return advanced_lookup[i].name; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +static void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ + struct iwl_trans *trans = priv->trans; + u32 base; + struct iwl_error_event_table table; + + base = priv->device_pointers.error_event_table; + if (priv->cur_ucode == IWL_UCODE_INIT) { + if (!base) + base = priv->fw->init_errlog_ptr; + } else { + if (!base) + base = priv->fw->inst_errlog_ptr; + } + + if (!iwlagn_hw_valid_rtc_data_addr(base)) { + IWL_ERR(priv, + "Not valid error log pointer 0x%08X for %s uCode\n", + base, + (priv->cur_ucode == IWL_UCODE_INIT) + ? "Init" : "RT"); + return; + } + + /*TODO: Update dbgfs with ISR error stats obtained below */ + iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table)); + + if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { + IWL_ERR(trans, "Start IWL Error Log Dump:\n"); + IWL_ERR(trans, "Status: 0x%08lX, count: %d\n", + priv->status, table.valid); + } + + trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, + table.data1, table.data2, table.line, + table.blink1, table.blink2, table.ilink1, + table.ilink2, table.bcon_time, table.gp1, + table.gp2, table.gp3, table.ucode_ver, + table.hw_ver, table.brd_ver); + IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id, + desc_lookup(table.error_id)); + IWL_ERR(priv, "0x%08X | uPc\n", table.pc); + IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1); + IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2); + IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1); + IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2); + IWL_ERR(priv, "0x%08X | data1\n", table.data1); + IWL_ERR(priv, "0x%08X | data2\n", table.data2); + IWL_ERR(priv, "0x%08X | line\n", table.line); + IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time); + IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low); + IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi); + IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1); + IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2); + IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3); + IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver); + IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver); + IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver); + IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd); + IWL_ERR(priv, "0x%08X | isr0\n", table.isr0); + IWL_ERR(priv, "0x%08X | isr1\n", table.isr1); + IWL_ERR(priv, "0x%08X | isr2\n", table.isr2); + IWL_ERR(priv, "0x%08X | isr3\n", table.isr3); + IWL_ERR(priv, "0x%08X | isr4\n", table.isr4); + IWL_ERR(priv, "0x%08X | isr_pref\n", table.isr_pref); + IWL_ERR(priv, "0x%08X | wait_event\n", table.wait_event); + IWL_ERR(priv, "0x%08X | l2p_control\n", table.l2p_control); + IWL_ERR(priv, "0x%08X | l2p_duration\n", table.l2p_duration); + IWL_ERR(priv, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid); + IWL_ERR(priv, "0x%08X | l2p_addr_match\n", table.l2p_addr_match); + IWL_ERR(priv, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel); + IWL_ERR(priv, "0x%08X | timestamp\n", table.u_timestamp); + IWL_ERR(priv, "0x%08X | flow_handler\n", table.flow_handler); +} + +#define EVENT_START_OFFSET (4 * sizeof(u32)) + +/** + * iwl_print_event_log - Dump error event log to syslog + * + */ +static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode, + int pos, char **buf, size_t bufsz) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + unsigned long reg_flags; + + struct iwl_trans *trans = priv->trans; + + if (num_events == 0) + return pos; + + base = priv->device_pointers.log_event_table; + if (priv->cur_ucode == IWL_UCODE_INIT) { + if (!base) + base = priv->fw->init_evtlog_ptr; + } else { + if (!base) + base = priv->fw->inst_evtlog_ptr; + } + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* Make sure device is powered up for SRAM reads */ + spin_lock_irqsave(&trans->reg_lock, reg_flags); + if (unlikely(!iwl_grab_nic_access(trans))) + goto out_unlock; + + /* Set starting address; reads will auto-increment */ + iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT); + time = iwl_read32(trans, HBUS_TARG_MEM_RDAT); + if (mode == 0) { + /* data, ev */ + if (bufsz) { + pos += scnprintf(*buf + pos, bufsz - pos, + "EVT_LOG:0x%08x:%04u\n", + time, ev); + } else { + trace_iwlwifi_dev_ucode_event(trans->dev, 0, + time, ev); + IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", + time, ev); + } + } else { + data = iwl_read32(trans, HBUS_TARG_MEM_RDAT); + if (bufsz) { + pos += scnprintf(*buf + pos, bufsz - pos, + "EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + } else { + IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + trace_iwlwifi_dev_ucode_event(trans->dev, time, + data, ev); + } + } + } + + /* Allow device to power down */ + iwl_release_nic_access(trans); +out_unlock: + spin_unlock_irqrestore(&trans->reg_lock, reg_flags); + return pos; +} + +/** + * iwl_print_last_event_logs - Dump the newest # of event log to syslog + */ +static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity, + u32 num_wraps, u32 next_entry, + u32 size, u32 mode, + int pos, char **buf, size_t bufsz) +{ + /* + * display the newest DEFAULT_LOG_ENTRIES entries + * i.e the entries just before the next ont that uCode would fill. + */ + if (num_wraps) { + if (next_entry < size) { + pos = iwl_print_event_log(priv, + capacity - (size - next_entry), + size - next_entry, mode, + pos, buf, bufsz); + pos = iwl_print_event_log(priv, 0, + next_entry, mode, + pos, buf, bufsz); + } else + pos = iwl_print_event_log(priv, next_entry - size, + size, mode, pos, buf, bufsz); + } else { + if (next_entry < size) { + pos = iwl_print_event_log(priv, 0, next_entry, + mode, pos, buf, bufsz); + } else { + pos = iwl_print_event_log(priv, next_entry - size, + size, mode, pos, buf, bufsz); + } + } + return pos; +} + +#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20) + +int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, + char **buf, bool display) +{ + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + u32 logsize; + int pos = 0; + size_t bufsz = 0; + struct iwl_trans *trans = priv->trans; + + base = priv->device_pointers.log_event_table; + if (priv->cur_ucode == IWL_UCODE_INIT) { + logsize = priv->fw->init_evtlog_size; + if (!base) + base = priv->fw->init_evtlog_ptr; + } else { + logsize = priv->fw->inst_evtlog_size; + if (!base) + base = priv->fw->inst_evtlog_ptr; + } + + if (!iwlagn_hw_valid_rtc_data_addr(base)) { + IWL_ERR(priv, + "Invalid event log pointer 0x%08X for %s uCode\n", + base, + (priv->cur_ucode == IWL_UCODE_INIT) + ? "Init" : "RT"); + return -EINVAL; + } + + /* event log header */ + capacity = iwl_read_targ_mem(trans, base); + mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32))); + + if (capacity > logsize) { + IWL_ERR(priv, "Log capacity %d is bogus, limit to %d " + "entries\n", capacity, logsize); + capacity = logsize; + } + + if (next_entry > logsize) { + IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", + next_entry, logsize); + next_entry = logsize; + } + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n"); + return pos; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log) + size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) + ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; +#else + size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) + ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; +#endif + IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n", + size); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (display) { + if (full_log) + bufsz = capacity * 48; + else + bufsz = size * 48; + *buf = kmalloc(bufsz, GFP_KERNEL); + if (!*buf) + return -ENOMEM; + } + if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) { + /* + * if uCode has wrapped back to top of log, + * start at the oldest entry, + * i.e the next one that uCode would fill. + */ + if (num_wraps) + pos = iwl_print_event_log(priv, next_entry, + capacity - next_entry, mode, + pos, buf, bufsz); + /* (then/else) start at top of log */ + pos = iwl_print_event_log(priv, 0, + next_entry, mode, pos, buf, bufsz); + } else + pos = iwl_print_last_event_logs(priv, capacity, num_wraps, + next_entry, size, mode, + pos, buf, bufsz); +#else + pos = iwl_print_last_event_logs(priv, capacity, num_wraps, + next_entry, size, mode, + pos, buf, bufsz); +#endif + return pos; +} + +static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand) +{ + unsigned int reload_msec; + unsigned long reload_jiffies; + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_have_debug_level(IWL_DL_FW_ERRORS)) + iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS); +#endif + + /* uCode is no longer loaded. */ + priv->ucode_loaded = false; + + /* Set the FW error flag -- cleared on iwl_down */ + set_bit(STATUS_FW_ERROR, &priv->status); + + iwl_abort_notification_waits(&priv->notif_wait); + + /* Keep the restart process from trying to send host + * commands by clearing the ready bit */ + clear_bit(STATUS_READY, &priv->status); + + wake_up(&priv->trans->wait_command_queue); + + if (!ondemand) { + /* + * If firmware keep reloading, then it indicate something + * serious wrong and firmware having problem to recover + * from it. Instead of keep trying which will fill the syslog + * and hang the system, let's just stop it + */ + reload_jiffies = jiffies; + reload_msec = jiffies_to_msecs((long) reload_jiffies - + (long) priv->reload_jiffies); + priv->reload_jiffies = reload_jiffies; + if (reload_msec <= IWL_MIN_RELOAD_DURATION) { + priv->reload_count++; + if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { + IWL_ERR(priv, "BUG_ON, Stop restarting\n"); + return; + } + } else + priv->reload_count = 0; + } + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { + if (iwlwifi_mod_params.restart_fw) { + IWL_DEBUG_FW_ERRORS(priv, + "Restarting adapter due to uCode error.\n"); + queue_work(priv->workqueue, &priv->restart); + } else + IWL_DEBUG_FW_ERRORS(priv, + "Detected FW error, but not restarting\n"); + } +} + +static void iwl_nic_error(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + + IWL_ERR(priv, "Loaded firmware version: %s\n", + priv->fw->fw_version); + + iwl_dump_nic_error_log(priv); + iwl_dump_nic_event_log(priv, false, NULL, false); + + iwlagn_fw_error(priv, false); +} + +static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + + if (!iwl_check_for_ct_kill(priv)) { + IWL_ERR(priv, "Restarting adapter queue is full\n"); + iwlagn_fw_error(priv, false); + } +} + +#define EEPROM_RF_CONFIG_TYPE_MAX 0x3 + +static void iwl_nic_config(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + u16 radio_cfg = priv->eeprom_data->radio_cfg; + + /* SKU Control */ + iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH | + CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP, + (CSR_HW_REV_STEP(priv->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) | + (CSR_HW_REV_DASH(priv->trans->hw_rev) << + CSR_HW_IF_CONFIG_REG_POS_MAC_DASH)); + + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) { + u32 reg_val = + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) << + CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) << + CSR_HW_IF_CONFIG_REG_POS_PHY_STEP | + EEPROM_RF_CFG_DASH_MSK(radio_cfg) << + CSR_HW_IF_CONFIG_REG_POS_PHY_DASH; + + iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE | + CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP | + CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val); + + IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n", + EEPROM_RF_CFG_TYPE_MSK(radio_cfg), + EEPROM_RF_CFG_STEP_MSK(radio_cfg), + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + } else { + WARN_ON(1); + } + + /* set CSR_HW_CONFIG_REG for uCode use */ + iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + + /* W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), + * causing ME FW to lose ownership and not being able to obtain it back. + */ + iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + + if (priv->lib->nic_config) + priv->lib->nic_config(priv); +} + +static void iwl_wimax_active(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + + clear_bit(STATUS_READY, &priv->status); + IWL_ERR(priv, "RF is used by WiMAX\n"); +} + +static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + int mq = priv->queue_to_mac80211[queue]; + + if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) + return; + + if (atomic_inc_return(&priv->queue_stop_count[mq]) > 1) { + IWL_DEBUG_TX_QUEUES(priv, + "queue %d (mac80211 %d) already stopped\n", + queue, mq); + return; + } + + set_bit(mq, &priv->transport_queue_stop); + ieee80211_stop_queue(priv->hw, mq); +} + +static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + int mq = priv->queue_to_mac80211[queue]; + + if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE)) + return; + + if (atomic_dec_return(&priv->queue_stop_count[mq]) > 0) { + IWL_DEBUG_TX_QUEUES(priv, + "queue %d (mac80211 %d) already awake\n", + queue, mq); + return; + } + + clear_bit(mq, &priv->transport_queue_stop); + + if (!priv->passive_no_rx) + ieee80211_wake_queue(priv->hw, mq); +} + +void iwlagn_lift_passive_no_rx(struct iwl_priv *priv) +{ + int mq; + + if (!priv->passive_no_rx) + return; + + for (mq = 0; mq < IWLAGN_FIRST_AMPDU_QUEUE; mq++) { + if (!test_bit(mq, &priv->transport_queue_stop)) { + IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d", mq); + ieee80211_wake_queue(priv->hw, mq); + } else { + IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d", mq); + } + } + + priv->passive_no_rx = false; +} + +static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + struct ieee80211_tx_info *info; + + info = IEEE80211_SKB_CB(skb); + iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); + dev_kfree_skb_any(skb); +} + +static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + + if (state) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + wiphy_rfkill_set_hw_state(priv->hw->wiphy, state); +} + +static const struct iwl_op_mode_ops iwl_dvm_ops = { + .start = iwl_op_mode_dvm_start, + .stop = iwl_op_mode_dvm_stop, + .rx = iwl_rx_dispatch, + .queue_full = iwl_stop_sw_queue, + .queue_not_full = iwl_wake_sw_queue, + .hw_rf_kill = iwl_set_hw_rfkill_state, + .free_skb = iwl_free_skb, + .nic_error = iwl_nic_error, + .cmd_queue_full = iwl_cmd_queue_full, + .nic_config = iwl_nic_config, + .wimax_active = iwl_wimax_active, +}; + +/***************************************************************************** + * + * driver and module entry point + * + *****************************************************************************/ +static int __init iwl_init(void) +{ + + int ret; + pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); + pr_info(DRV_COPYRIGHT "\n"); + + ret = iwlagn_rate_control_register(); + if (ret) { + pr_err("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = iwl_opmode_register("iwldvm", &iwl_dvm_ops); + if (ret) { + pr_err("Unable to register op_mode: %d\n", ret); + iwlagn_rate_control_unregister(); + } + + return ret; +} +module_init(iwl_init); + +static void __exit iwl_exit(void) +{ + iwl_opmode_deregister("iwldvm"); + iwlagn_rate_control_unregister(); +} +module_exit(iwl_exit); diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c new file mode 100644 index 00000000000..518cf371580 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/power.c @@ -0,0 +1,387 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <net/mac80211.h> +#include "iwl-io.h" +#include "iwl-debug.h" +#include "iwl-trans.h" +#include "iwl-modparams.h" +#include "dev.h" +#include "agn.h" +#include "commands.h" +#include "power.h" + +/* + * Setting power level allows the card to go to sleep when not busy. + * + * We calculate a sleep command based on the required latency, which + * we get from mac80211. In order to handle thermal throttling, we can + * also use pre-defined power levels. + */ + +/* + * This defines the old power levels. They are still used by default + * (level 1) and for thermal throttle (levels 3 through 5) + */ + +struct iwl_power_vec_entry { + struct iwl_powertable_cmd cmd; + u8 no_dtim; /* number of skip dtim */ +}; + +#define IWL_DTIM_RANGE_0_MAX 2 +#define IWL_DTIM_RANGE_1_MAX 10 + +#define NOSLP cpu_to_le16(0), 0, 0 +#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 +#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \ + IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \ + IWL_POWER_ADVANCE_PM_ENA_MSK) +#define ASLP_TOUT(T) cpu_to_le32(T) +#define TU_TO_USEC 1024 +#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC) +#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \ + cpu_to_le32(X1), \ + cpu_to_le32(X2), \ + cpu_to_le32(X3), \ + cpu_to_le32(X4)} +/* default power management (not Tx power) table values */ +/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */ +/* DTIM 0 - 2 */ +static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} +}; + + +/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ +/* DTIM 3 - 10 */ +static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2} +}; + +/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ +/* DTIM 11 - */ +static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} +}; + +/* advance power management */ +/* DTIM 0 - 2 */ +static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} +}; + + +/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ +/* DTIM 3 - 10 */ +static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2} +}; + +/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ +/* DTIM 11 - */ +static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} +}; + +static void iwl_static_sleep_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd, + enum iwl_power_level lvl, int period) +{ + const struct iwl_power_vec_entry *table; + int max_sleep[IWL_POWER_VEC_SIZE] = { 0 }; + int i; + u8 skip; + u32 slp_itrvl; + + if (priv->cfg->adv_pm) { + table = apm_range_2; + if (period <= IWL_DTIM_RANGE_1_MAX) + table = apm_range_1; + if (period <= IWL_DTIM_RANGE_0_MAX) + table = apm_range_0; + } else { + table = range_2; + if (period <= IWL_DTIM_RANGE_1_MAX) + table = range_1; + if (period <= IWL_DTIM_RANGE_0_MAX) + table = range_0; + } + + if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM)) + memset(cmd, 0, sizeof(*cmd)); + else + *cmd = table[lvl].cmd; + + if (period == 0) { + skip = 0; + period = 1; + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + max_sleep[i] = 1; + + } else { + skip = table[lvl].no_dtim; + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]); + max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1; + } + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + /* figure out the listen interval based on dtim period and skip */ + if (slp_itrvl == 0xFF) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32(period * (skip + 1)); + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + if (slp_itrvl > period) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32((slp_itrvl / period) * period); + + if (skip) + cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; + else + cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; + + if (priv->cfg->base_params->shadow_reg_enable) + cmd->flags |= IWL_POWER_SHADOW_REG_ENA; + else + cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; + + if (iwl_advanced_bt_coexist(priv)) { + if (!priv->cfg->bt_params->bt_sco_disable) + cmd->flags |= IWL_POWER_BT_SCO_ENA; + else + cmd->flags &= ~IWL_POWER_BT_SCO_ENA; + } + + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL); + + /* enforce max sleep interval */ + for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) { + if (le32_to_cpu(cmd->sleep_interval[i]) > + (max_sleep[i] * period)) + cmd->sleep_interval[i] = + cpu_to_le32(max_sleep[i] * period); + if (i != (IWL_POWER_VEC_SIZE - 1)) { + if (le32_to_cpu(cmd->sleep_interval[i]) > + le32_to_cpu(cmd->sleep_interval[i+1])) + cmd->sleep_interval[i] = + cmd->sleep_interval[i+1]; + } + } + + if (priv->power_data.bus_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + else + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n", + skip, period); + /* The power level here is 0-4 (used as array index), but user expects + to see 1-5 (according to spec). */ + IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1); +} + +static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + + if (priv->power_data.bus_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); +} + +static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) +{ + IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); + IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); + IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); + IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n", + le32_to_cpu(cmd->sleep_interval[0]), + le32_to_cpu(cmd->sleep_interval[1]), + le32_to_cpu(cmd->sleep_interval[2]), + le32_to_cpu(cmd->sleep_interval[3]), + le32_to_cpu(cmd->sleep_interval[4])); + + return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, CMD_SYNC, + sizeof(struct iwl_powertable_cmd), cmd); +} + +static void iwl_power_build_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS; + int dtimper; + + dtimper = priv->hw->conf.ps_dtim_period ?: 1; + + if (priv->wowlan) + iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); + else if (!priv->cfg->base_params->no_idle_support && + priv->hw->conf.flags & IEEE80211_CONF_IDLE) + iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); + else if (iwl_tt_is_low_power_state(priv)) { + /* in thermal throttling low power state */ + iwl_static_sleep_cmd(priv, cmd, + iwl_tt_current_power_mode(priv), dtimper); + } else if (!enabled) + iwl_power_sleep_cam_cmd(priv, cmd); + else if (priv->power_data.debug_sleep_level_override >= 0) + iwl_static_sleep_cmd(priv, cmd, + priv->power_data.debug_sleep_level_override, + dtimper); + else { + /* Note that the user parameter is 1-5 (according to spec), + but we pass 0-4 because it acts as an array index. */ + if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 && + iwlwifi_mod_params.power_level <= IWL_POWER_NUM) + iwl_static_sleep_cmd(priv, cmd, + iwlwifi_mod_params.power_level - 1, dtimper); + else + iwl_static_sleep_cmd(priv, cmd, + IWL_POWER_INDEX_1, dtimper); + } +} + +int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, + bool force) +{ + int ret; + bool update_chains; + + lockdep_assert_held(&priv->mutex); + + /* Don't update the RX chain when chain noise calibration is running */ + update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || + priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; + + if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) + return 0; + + if (!iwl_is_ready_rf(priv)) + return -EIO; + + /* scan complete use sleep_power_next, need to be updated */ + memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); + if (test_bit(STATUS_SCANNING, &priv->status) && !force) { + IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); + return 0; + } + + if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) + iwl_dvm_set_pmi(priv, true); + + ret = iwl_set_power(priv, cmd); + if (!ret) { + if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) + iwl_dvm_set_pmi(priv, false); + + if (update_chains) + iwl_update_chain_flags(priv); + else + IWL_DEBUG_POWER(priv, + "Cannot update the power, chain noise " + "calibration running: %d\n", + priv->chain_noise_data.state); + + memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); + } else + IWL_ERR(priv, "set power fail, ret = %d", ret); + + return ret; +} + +int iwl_power_update_mode(struct iwl_priv *priv, bool force) +{ + struct iwl_powertable_cmd cmd; + + iwl_power_build_cmd(priv, &cmd); + return iwl_power_set_mode(priv, &cmd, force); +} + +/* initialize to default */ +void iwl_power_initialize(struct iwl_priv *priv) +{ + priv->power_data.bus_pm = priv->trans->pm_support; + + priv->power_data.debug_sleep_level_override = -1; + + memset(&priv->power_data.sleep_cmd, 0, + sizeof(priv->power_data.sleep_cmd)); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/power.h b/drivers/net/wireless/iwlwifi/dvm/power.h new file mode 100644 index 00000000000..a2cee7f0484 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/power.h @@ -0,0 +1,47 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#ifndef __iwl_power_setting_h__ +#define __iwl_power_setting_h__ + +#include "commands.h" + +struct iwl_power_mgr { + struct iwl_powertable_cmd sleep_cmd; + struct iwl_powertable_cmd sleep_cmd_next; + int debug_sleep_level_override; + bool bus_pm; +}; + +int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, + bool force); +int iwl_power_update_mode(struct iwl_priv *priv, bool force); +void iwl_power_initialize(struct iwl_priv *priv); + +extern bool no_sleep_autoadjust; + +#endif /* __iwl_power_setting_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c new file mode 100644 index 00000000000..6fddd2785e6 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -0,0 +1,3367 @@ +/****************************************************************************** + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <net/mac80211.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> + +#include <linux/workqueue.h> + +#include "dev.h" +#include "agn.h" + +#define RS_NAME "iwl-agn-rs" + +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 +#define IWL_NUMBER_TRY 1 +#define IWL_HT_NUMBER_TRY 3 + +#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ +#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max allowed rate miss before sync LQ cmd */ +#define IWL_MISSED_RATE_MAX 15 +/* max time to accum history 2 seconds */ +#define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ) + +static u8 rs_ht_to_legacy[] = { + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX +}; + +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; + +#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_SISO_##s##M_PLCP, \ + IWL_RATE_MIMO2_##s##M_PLCP,\ + IWL_RATE_MIMO3_##s##M_PLCP,\ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + /* FIXME:RS: ^^ should be INV (legacy) */ +}; + +static inline u8 rs_extract_rate(u32 rate_n_flags) +{ + return (u8)(rate_n_flags & RATE_MCS_RATE_MSK); +} + +static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) +{ + int idx = 0; + + /* HT rate format */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = rs_extract_rate(rate_n_flags); + + if (idx >= IWL_RATE_MIMO3_6M_PLCP) + idx = idx - IWL_RATE_MIMO3_6M_PLCP; + else if (idx >= IWL_RATE_MIMO2_6M_PLCP) + idx = idx - IWL_RATE_MIMO2_6M_PLCP; + + idx += IWL_FIRST_OFDM_RATE; + /* skip 9M not supported in ht*/ + if (idx >= IWL_RATE_9M_INDEX) + idx += 1; + if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) + return idx; + + /* legacy rate format, search for match in table */ + } else { + for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) + if (iwl_rates[idx].plcp == + rs_extract_rate(rate_n_flags)) + return idx; + } + + return -1; +} + +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct sk_buff *skb, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta); +static void rs_fill_link_cmd(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 rate_n_flags); +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); + + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index); +#else +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{} +#endif + +/** + * The following tables contain the expected throughput metrics for all rates + * + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * + * where invalid entries are zeros. + * + * CCK rates are only valid in legacy table and will only be used in G + * (2.4 GHz) band. + */ + +static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { + 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 +}; + +static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */ + {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */ + {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */ + {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */ +}; + +static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ + {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ + {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */ + {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */ + {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */ + {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */ + {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/ +}; + +static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ + {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ + {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */ + {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ + {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ + {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ + {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ +}; + +static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { + {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */ + {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */ + {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */ + {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ +}; + +/* mbps, mcs */ +static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { + { "1", "BPSK DSSS"}, + { "2", "QPSK DSSS"}, + {"5.5", "BPSK CCK"}, + { "11", "QPSK CCK"}, + { "6", "BPSK 1/2"}, + { "9", "BPSK 1/2"}, + { "12", "QPSK 1/2"}, + { "18", "QPSK 3/4"}, + { "24", "16QAM 1/2"}, + { "36", "16QAM 3/4"}, + { "48", "64QAM 2/3"}, + { "54", "64QAM 3/4"}, + { "60", "64QAM 5/6"}, +}; + +#define MCS_INDEX_PER_STREAM (8) + +static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) +{ + window->data = 0; + window->success_counter = 0; + window->success_ratio = IWL_INVALID_VALUE; + window->counter = 0; + window->average_tpt = IWL_INVALID_VALUE; + window->stamp = 0; +} + +static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return (ant_type & valid_antenna) == ant_type; +} + +/* + * removes the old data from the statistics. All data that is older than + * TID_MAX_TIME_DIFF, will be deleted. + */ +static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) +{ + /* The oldest age we want to keep */ + u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; + + while (tl->queue_count && + (tl->time_stamp < oldest_time)) { + tl->total -= tl->packet_count[tl->head]; + tl->packet_count[tl->head] = 0; + tl->time_stamp += TID_QUEUE_CELL_SPACING; + tl->queue_count--; + tl->head++; + if (tl->head >= TID_QUEUE_MAX_SIZE) + tl->head = 0; + } +} + +/* + * increment traffic load value for tid and also remove + * any old values if passed the certain time period + */ +static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, + struct ieee80211_hdr *hdr) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + u8 tid; + + if (ieee80211_is_data_qos(hdr->frame_control)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } else + return IWL_MAX_TID_COUNT; + + if (unlikely(tid >= IWL_MAX_TID_COUNT)) + return IWL_MAX_TID_COUNT; + + tl = &lq_data->load[tid]; + + curr_time -= curr_time % TID_ROUND_VALUE; + + /* Happens only for the first packet. Initialize the data */ + if (!(tl->queue_count)) { + tl->total = 1; + tl->time_stamp = curr_time; + tl->queue_count = 1; + tl->head = 0; + tl->packet_count[0] = 1; + return IWL_MAX_TID_COUNT; + } + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + index = (tl->head + index) % TID_QUEUE_MAX_SIZE; + tl->packet_count[index] = tl->packet_count[index] + 1; + tl->total = tl->total + 1; + + if ((index + 1) > tl->queue_count) + tl->queue_count = index + 1; + + return tid; +} + +#ifdef CONFIG_MAC80211_DEBUGFS +/** + * Program the device to use fixed rate for frame transmit + * This is for debugging/testing only + * once the device start use fixed rate, we need to reload the module + * to being back the normal operation. + */ +static void rs_program_fix_rate(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta) +{ + struct iwl_station_priv *sta_priv = + container_of(lq_sta, struct iwl_station_priv, lq_sta); + struct iwl_rxon_context *ctx = sta_priv->ctx; + + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + /* testmode has higher priority to overwirte the fixed rate */ + if (priv->tm_fixed_rate) + lq_sta->dbg_fixed_rate = priv->tm_fixed_rate; +#endif + + IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n", + lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); + + if (lq_sta->dbg_fixed_rate) { + rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); + iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC, + false); + } +} +#endif + +/* + get the traffic load value for tid +*/ +static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + + if (tid >= IWL_MAX_TID_COUNT) + return 0; + + tl = &(lq_data->load[tid]); + + curr_time -= curr_time % TID_ROUND_VALUE; + + if (!(tl->queue_count)) + return 0; + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + return tl->total; +} + +static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, + struct iwl_lq_sta *lq_data, u8 tid, + struct ieee80211_sta *sta) +{ + int ret = -EAGAIN; + u32 load; + + /* + * Don't create TX aggregation sessions when in high + * BT traffic, as they would just be disrupted by BT. + */ + if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) { + IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n", + priv->bt_traffic_load); + return ret; + } + + load = rs_tl_get_load(lq_data, tid); + + if ((iwlwifi_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) { + IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", + sta->addr, tid); + ret = ieee80211_start_tx_ba_session(sta, tid, 5000); + if (ret == -EAGAIN) { + /* + * driver and mac80211 is out of sync + * this might be cause by reloading firmware + * stop the tx ba session here + */ + IWL_ERR(priv, "Fail start Tx agg on tid: %d\n", + tid); + ieee80211_stop_tx_ba_session(sta, tid); + } + } else { + IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d " + "because load = %u\n", tid, load); + } + return ret; +} + +static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, + struct iwl_lq_sta *lq_data, + struct ieee80211_sta *sta) +{ + if (tid < IWL_MAX_TID_COUNT) + rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + else + IWL_ERR(priv, "tid exceeds max TID count: %d/%d\n", + tid, IWL_MAX_TID_COUNT); +} + +static inline int get_num_of_ant_from_rate(u32 rate_n_flags) +{ + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); +} + +/* + * Static function to get the expected throughput from an iwl_scale_tbl_info + * that wraps a NULL pointer check + */ +static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) +{ + if (tbl->expected_tpt) + return tbl->expected_tpt[rs_index]; + return 0; +} + +/** + * rs_collect_tx_data - Update the success/failure sliding window + * + * We keep a sliding window of the last 62 packets transmitted + * at this rate. window->data contains the bitmask of successful + * packets. + */ +static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, + int scale_index, int attempts, int successes) +{ + struct iwl_rate_scale_data *window = NULL; + static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); + s32 fail_count, tpt; + + if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) + return -EINVAL; + + /* Select window for current tx bit rate */ + window = &(tbl->win[scale_index]); + + /* Get expected throughput */ + tpt = get_expected_tpt(tbl, scale_index); + + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history window; anything older isn't really relevant any more. + * If we have filled up the sliding window, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ + while (attempts > 0) { + if (window->counter >= IWL_RATE_MAX_WINDOW) { + + /* remove earliest */ + window->counter = IWL_RATE_MAX_WINDOW - 1; + + if (window->data & mask) { + window->data &= ~mask; + window->success_counter--; + } + } + + /* Increment frames-attempted counter */ + window->counter++; + + /* Shift bitmap by one frame to throw away oldest history */ + window->data <<= 1; + + /* Mark the most recent #successes attempts as successful */ + if (successes > 0) { + window->success_counter++; + window->data |= 0x1; + successes--; + } + + attempts--; + } + + /* Calculate current success ratio, avoid divide-by-0! */ + if (window->counter > 0) + window->success_ratio = 128 * (100 * window->success_counter) + / window->counter; + else + window->success_ratio = IWL_INVALID_VALUE; + + fail_count = window->counter - window->success_counter; + + /* Calculate average throughput, if we have enough history. */ + if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || + (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) + window->average_tpt = (window->success_ratio * tpt + 64) / 128; + else + window->average_tpt = IWL_INVALID_VALUE; + + /* Tag this window as having been updated */ + window->stamp = jiffies; + + return 0; +} + +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ +/* FIXME:RS:remove this function and put the flags statically in the table */ +static u32 rate_n_flags_from_tbl(struct iwl_priv *priv, + struct iwl_scale_tbl_info *tbl, + int index, u8 use_green) +{ + u32 rate_n_flags = 0; + + if (is_legacy(tbl->lq_type)) { + rate_n_flags = iwl_rates[index].plcp; + if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) + rate_n_flags |= RATE_MCS_CCK_MSK; + + } else if (is_Ht(tbl->lq_type)) { + if (index > IWL_LAST_OFDM_RATE) { + IWL_ERR(priv, "Invalid HT rate index %d\n", index); + index = IWL_LAST_OFDM_RATE; + } + rate_n_flags = RATE_MCS_HT_MSK; + + if (is_siso(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_siso; + else if (is_mimo2(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_mimo2; + else + rate_n_flags |= iwl_rates[index].plcp_mimo3; + } else { + IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type); + } + + rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & + RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_ht40) { + if (tbl->is_dup) + rate_n_flags |= RATE_MCS_DUP_MSK; + else + rate_n_flags |= RATE_MCS_HT40_MSK; + } + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IWL_ERR(priv, "GF was set with SGI:SISO\n"); + } + } + } + return rate_n_flags; +} + +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ +static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, + enum ieee80211_band band, + struct iwl_scale_tbl_info *tbl, + int *rate_idx) +{ + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); + u8 mcs; + + memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); + *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); + + if (*rate_idx == IWL_RATE_INVALID) { + *rate_idx = -1; + return -EINVAL; + } + tbl->is_SGI = 0; /* default legacy setup */ + tbl->is_ht40 = 0; + tbl->is_dup = 0; + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; + tbl->max_search = IWL_MAX_SEARCH; + + /* legacy rate format */ + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (num_of_ant == 1) { + if (band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + } + /* HT rate format */ + } else { + if (rate_n_flags & RATE_MCS_SGI_MSK) + tbl->is_SGI = 1; + + if ((rate_n_flags & RATE_MCS_HT40_MSK) || + (rate_n_flags & RATE_MCS_DUP_MSK)) + tbl->is_ht40 = 1; + + if (rate_n_flags & RATE_MCS_DUP_MSK) + tbl->is_dup = 1; + + mcs = rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= IWL_RATE_SISO_60M_PLCP) { + if (num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE*/ + /* MIMO2 */ + } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { + if (num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + /* MIMO3 */ + } else { + if (num_of_ant == 3) { + tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; + tbl->lq_type = LQ_MIMO3; + } + } + } + return 0; +} + +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct iwl_scale_tbl_info *tbl) +{ + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while ((new_ant_type != tbl->ant_type) && + !rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; +} + +/** + * Green-field mode is valid if the station supports it and + * there are no non-GF stations present in the BSS. + */ +static bool rs_use_green(struct ieee80211_sta *sta) +{ + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && + !(ctx->ht.non_gf_sta_present); +} + +/** + * rs_get_supported_rates - get the available rates + * + * if management frame or broadcast frame only return + * basic available rates. + * + */ +static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum iwl_table_type rate_type) +{ + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { + if (is_siso(rate_type)) + return lq_sta->active_siso_rate; + else if (is_mimo2(rate_type)) + return lq_sta->active_mimo2_rate; + else + return lq_sta->active_mimo3_rate; + } +} + +static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, + int rate_type) +{ + u8 high = IWL_RATE_INVALID; + u8 low = IWL_RATE_INVALID; + + /* 802.11A or ht walks to the next literal adjacent rate in + * the rate table */ + if (is_a_band(rate_type) || !is_legacy(rate_type)) { + int i; + u32 mask; + + /* Find the previous rate that is in the rate mask */ + i = index - 1; + for (mask = (1 << i); i >= 0; i--, mask >>= 1) { + if (rate_mask & mask) { + low = i; + break; + } + } + + /* Find the next rate that is in the rate mask */ + i = index + 1; + for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { + if (rate_mask & mask) { + high = i; + break; + } + } + + return (high << 8) | low; + } + + low = index; + while (low != IWL_RATE_INVALID) { + low = iwl_rates[low].prev_rs; + if (low == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << low)) + break; + IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); + } + + high = index; + while (high != IWL_RATE_INVALID) { + high = iwl_rates[high].next_rs; + if (high == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << high)) + break; + IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); + } + + return (high << 8) | low; +} + +static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + u8 scale_index, u8 ht_possible) +{ + s32 low; + u16 rate_mask; + u16 high_low; + u8 switch_to_legacy = 0; + u8 is_green = lq_sta->is_green; + struct iwl_priv *priv = lq_sta->drv; + + /* check if we need to switch from HT to legacy rates. + * assumption is that mandatory rates (1Mbps or 6Mbps) + * are always supported (spec demand) */ + if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { + switch_to_legacy = 1; + scale_index = rs_ht_to_legacy[scale_index]; + if (lq_sta->band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + + if (num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = + first_antenna(priv->eeprom_data->valid_tx_ant); + + tbl->is_ht40 = 0; + tbl->is_SGI = 0; + tbl->max_search = IWL_MAX_SEARCH; + } + + rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); + + /* Mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + rate_mask = (u16)(rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_mask = (u16)(rate_mask & lq_sta->supp_rates); + } + + /* If we switched from HT to legacy, check current rate */ + if (switch_to_legacy && (rate_mask & (1 << scale_index))) { + low = scale_index; + goto out; + } + + high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, + tbl->lq_type); + low = high_low & 0xff; + + if (low == IWL_RATE_INVALID) + low = scale_index; + +out: + return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); +} + +/* + * Simple function to compare two rate scale table types + */ +static bool table_type_matches(struct iwl_scale_tbl_info *a, + struct iwl_scale_tbl_info *b) +{ + return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && + (a->is_SGI == b->is_SGI); +} + +static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct iwl_lq_sta *lq_sta) +{ + struct iwl_scale_tbl_info *tbl; + bool full_concurrent = priv->bt_full_concurrent; + + if (priv->bt_ant_couple_ok) { + /* + * Is there a need to switch between + * full concurrency and 3-wire? + */ + if (priv->bt_ci_compliance && priv->bt_ant_couple_ok) + full_concurrent = true; + else + full_concurrent = false; + } + if ((priv->bt_traffic_load != priv->last_bt_traffic_load) || + (priv->bt_full_concurrent != full_concurrent)) { + priv->bt_full_concurrent = full_concurrent; + priv->last_bt_traffic_load = priv->bt_traffic_load; + + /* Update uCode's rate table. */ + tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); + iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); + + queue_work(priv->workqueue, &priv->bt_full_concurrency); + } +} + +/* + * mac80211 sends us Tx status + */ +static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb) +{ + int legacy_success; + int retries; + int rs_index, mac_index, i; + struct iwl_lq_sta *lq_sta = priv_sta; + struct iwl_link_quality_cmd *table; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_op_mode *op_mode = (struct iwl_op_mode *)priv_r; + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + enum mac80211_rate_control_flags mac_flags; + u32 tx_rate; + struct iwl_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n"); + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (!lq_sta) { + IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n"); + return; + } else if (!lq_sta->drv) { + IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); + return; + } + + if (!ieee80211_is_data(hdr->frame_control) || + info->flags & IEEE80211_TX_CTL_NO_ACK) + return; + + /* This packet was aggregated but doesn't carry status info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + table = &lq_sta->lq; + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); + if (priv->band == IEEE80211_BAND_5GHZ) + rs_index -= IWL_FIRST_OFDM_RATE; + mac_flags = info->status.rates[0].flags; + mac_index = info->status.rates[0].idx; + /* For HT packets, map MCS to PLCP */ + if (mac_flags & IEEE80211_TX_RC_MCS) { + mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */ + if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) + mac_index++; + /* + * mac80211 HT index is always zero-indexed; we need to move + * HT OFDM rates after CCK rates in 2.4 GHz band + */ + if (priv->band == IEEE80211_BAND_2GHZ) + mac_index += IWL_FIRST_OFDM_RATE; + } + /* Here we actually compare this rate to the latest LQ command */ + if ((mac_index < 0) || + (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || + (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || + (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) || + (tbl_type.ant_type != info->status.antenna) || + (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) || + (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || + (rs_index != mac_index)) { + IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate); + /* + * Since rates mis-match, the last LQ command may have failed. + * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with + * ... driver. + */ + lq_sta->missed_rate_counter++; + if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { + lq_sta->missed_rate_counter = 0; + iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); + } + /* Regardless, ignore this status info for outdated rate */ + return; + } else + /* Rate did match, so reset the missed_rate_counter */ + lq_sta->missed_rate_counter = 0; + + /* Figure out if rate scale algorithm is in active or search table */ + if (table_type_matches(&tbl_type, + &(lq_sta->lq_info[lq_sta->active_tbl]))) { + curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + } else if (table_type_matches(&tbl_type, + &lq_sta->lq_info[1 - lq_sta->active_tbl])) { + curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + } else { + IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n"); + tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n", + tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); + tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); + IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n", + tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); + IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n", + tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI); + /* + * no matching table found, let's by-pass the data collection + * and continue to perform rate scale to find the rate table + */ + rs_stay_in_table(lq_sta, true); + goto done; + } + + /* + * Updating the frame history depends on whether packets were + * aggregated. + * + * For aggregation, all packets were transmitted at the same rate, the + * first index into rate scale table. + */ + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, + &rs_index); + rs_collect_tx_data(curr_tbl, rs_index, + info->status.ampdu_len, + info->status.ampdu_ack_len); + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += (info->status.ampdu_len - + info->status.ampdu_ack_len); + } + } else { + /* + * For legacy, update frame history with for each Tx retry. + */ + retries = info->status.rates[0].count - 1; + /* HW doesn't send more than 15 retries */ + retries = min(retries, 15); + + /* The last transmission may have been successful */ + legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); + /* Collect data for each rate used during failed TX attempts */ + for (i = 0; i <= retries; ++i) { + tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, + &tbl_type, &rs_index); + /* + * Only collect stats if retried rate is in the same RS + * table as active/search. + */ + if (table_type_matches(&tbl_type, curr_tbl)) + tmp_tbl = curr_tbl; + else if (table_type_matches(&tbl_type, other_tbl)) + tmp_tbl = other_tbl; + else + continue; + rs_collect_tx_data(tmp_tbl, rs_index, 1, + i < retries ? 0 : legacy_success); + } + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->stay_in_tbl) { + lq_sta->total_success += legacy_success; + lq_sta->total_failed += retries + (1 - legacy_success); + } + } + /* The last TX rate is cached in lq_sta; it's set in if/else above */ + lq_sta->last_rate_n_flags = tx_rate; +done: + /* See if there's a better rate or modulation mode to try. */ + if (sta && sta->supp_rates[sband->band]) + rs_rate_scale_perform(priv, skb, sta, lq_sta); + +#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_TESTMODE) + if ((priv->tm_fixed_rate) && + (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate)) + rs_program_fix_rate(priv, lq_sta); +#endif + if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist) + rs_bt_update_lq(priv, ctx, lq_sta); +} + +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history statistics. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ +static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, + struct iwl_lq_sta *lq_sta) +{ + IWL_DEBUG_RATE(priv, "we are staying in the same table\n"); + lq_sta->stay_in_tbl = 1; /* only place this gets set */ + if (is_legacy) { + lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; + } else { + lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; + } + lq_sta->table_count = 0; + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = jiffies; + lq_sta->action_counter = 0; +} + +/* + * Find correct throughput table for given mode of modulation + */ +static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl) +{ + /* Used to choose among HT tables */ + s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; + + /* Check for invalid LQ type */ + if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Legacy rates have only one table */ + if (is_legacy(tbl->lq_type)) { + tbl->expected_tpt = expected_tpt_legacy; + return; + } + + /* Choose among many HT tables depending on number of streams + * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation + * status */ + if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) + ht_tbl_pointer = expected_tpt_siso20MHz; + else if (is_siso(tbl->lq_type)) + ht_tbl_pointer = expected_tpt_siso40MHz; + else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) + ht_tbl_pointer = expected_tpt_mimo2_20MHz; + else if (is_mimo2(tbl->lq_type)) + ht_tbl_pointer = expected_tpt_mimo2_40MHz; + else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) + ht_tbl_pointer = expected_tpt_mimo3_20MHz; + else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ + ht_tbl_pointer = expected_tpt_mimo3_40MHz; + + if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ + tbl->expected_tpt = ht_tbl_pointer[0]; + else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ + tbl->expected_tpt = ht_tbl_pointer[1]; + else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ + tbl->expected_tpt = ht_tbl_pointer[2]; + else /* AGG+SGI */ + tbl->expected_tpt = ht_tbl_pointer[3]; +} + +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ +static s32 rs_get_best_rate(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, /* "search" */ + u16 rate_mask, s8 index) +{ + /* "active" values */ + struct iwl_scale_tbl_info *active_tbl = + &(lq_sta->lq_info[lq_sta->active_tbl]); + s32 active_sr = active_tbl->win[index].success_ratio; + s32 active_tpt = active_tbl->expected_tpt[index]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; + u16 high_low; + s8 rate = index; + + new_rate = high = low = start_hi = IWL_RATE_INVALID; + + for (; ;) { + high_low = rs_get_adjacent_rate(priv, rate, rate_mask, + tbl->lq_type); + + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ + if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && + ((active_sr > IWL_RATE_DECREASE_TH) && + (active_sr <= IWL_RATE_HIGH_TH) && + (tpt_tbl[rate] <= active_tpt))) || + ((active_sr >= IWL_RATE_SCALE_SWITCH) && + (tpt_tbl[rate] > active_tpt))) { + + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ + if (start_hi != IWL_RATE_INVALID) { + new_rate = start_hi; + break; + } + + new_rate = rate; + + /* Loop again with lower rate */ + if (low != IWL_RATE_INVALID) + rate = low; + + /* Lower rate not available, use the original */ + else + break; + + /* Else try to raise the "search" rate to match "active" */ + } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ + if (new_rate != IWL_RATE_INVALID) + break; + + /* Loop again with higher rate */ + else if (high != IWL_RATE_INVALID) { + start_hi = high; + rate = high; + + /* Higher rate not available, use the original */ + } else { + new_rate = rate; + break; + } + } + } + + return new_rate; +} + +/* + * Set up search table for MIMO2 + */ +static int rs_switch_to_mimo2(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) + return -1; + + if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (priv->hw_params.tx_chains_num < 2) + return -1; + + IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; + tbl->is_dup = lq_sta->is_dup; + tbl->action = 0; + tbl->max_search = IWL_MAX_SEARCH; + rate_mask = lq_sta->active_mimo2_rate; + + if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); + + IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for MIMO3 + */ +static int rs_switch_to_mimo3(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) + return -1; + + if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (priv->hw_params.tx_chains_num < 3) + return -1; + + IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n"); + + tbl->lq_type = LQ_MIMO3; + tbl->is_dup = lq_sta->is_dup; + tbl->action = 0; + tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; + rate_mask = lq_sta->active_mimo3_rate; + + if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n", + rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); + + IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for SISO + */ +static int rs_switch_to_siso(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + u8 is_green = lq_sta->is_green; + s32 rate; + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) + return -1; + + IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n"); + + tbl->is_dup = lq_sta->is_dup; + tbl->lq_type = LQ_SISO; + tbl->action = 0; + tbl->max_search = IWL_MAX_SEARCH; + rate_mask = lq_sta->active_siso_rate; + + if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + tbl->is_ht40 = 1; + else + tbl->is_ht40 = 0; + + if (is_green) + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ + + rs_set_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); + IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Try to switch to new modulation mode from legacy + */ +static int rs_move_legacy_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, + int index) +{ + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + int ret = 0; + u8 update_search_tbl_counter = 0; + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + /* nothing */ + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + /* avoid antenna B unless MIMO */ + if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2) + tbl->action = IWL_LEGACY_SWITCH_SISO; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + /* avoid antenna B and MIMO */ + valid_tx_ant = + first_antenna(priv->eeprom_data->valid_tx_ant); + if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 && + tbl->action != IWL_LEGACY_SWITCH_SISO) + tbl->action = IWL_LEGACY_SWITCH_SISO; + break; + default: + IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); + break; + } + + if (!iwl_ht_enabled(priv)) + /* stay in Legacy */ + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && + tbl->action > IWL_LEGACY_SWITCH_SISO) + tbl->action = IWL_LEGACY_SWITCH_SISO; + + /* configure as 1x1 if bt full concurrency */ + if (priv->bt_full_concurrent) { + if (!iwl_ht_enabled(priv)) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) + tbl->action = IWL_LEGACY_SWITCH_SISO; + valid_tx_ant = + first_antenna(priv->eeprom_data->valid_tx_ant); + } + + start_action = tbl->action; + for (; ;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_LEGACY_SWITCH_ANTENNA1: + case IWL_LEGACY_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n"); + + if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + /* Don't change antenna if success has been great */ + if (window->success_ratio >= IWL_RS_GOOD_RATIO && + !priv->bt_full_concurrent && + priv->bt_traffic_load == + IWL_BT_COEX_TRAFFIC_LOAD_NONE) + break; + + /* Set up search table to try other antenna */ + memcpy(search_tbl, tbl, sz); + + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + update_search_tbl_counter = 1; + rs_set_expected_tpt_table(lq_sta, search_tbl); + goto out; + } + break; + case IWL_LEGACY_SWITCH_SISO: + IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + + break; + case IWL_LEGACY_SWITCH_MIMO2_AB: + case IWL_LEGACY_SWITCH_MIMO2_AC: + case IWL_LEGACY_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n"); + + /* Set up search table to try MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + break; + + case IWL_LEGACY_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n"); + + /* Set up search table to try MIMO3 */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->action_counter = 0; + goto out; + } + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + + } + search_tbl->lq_type = LQ_NONE; + return 0; + +out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + return 0; + +} + +/* + * Try to switch to new modulation mode from SISO + */ +static int rs_move_siso_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int index) +{ + u8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + u8 update_search_tbl_counter = 0; + int ret; + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + /* nothing */ + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + /* avoid antenna B unless MIMO */ + if (tbl->action == IWL_SISO_SWITCH_ANTENNA2) + tbl->action = IWL_SISO_SWITCH_MIMO2_AB; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + /* avoid antenna B and MIMO */ + valid_tx_ant = + first_antenna(priv->eeprom_data->valid_tx_ant); + if (tbl->action != IWL_SISO_SWITCH_ANTENNA1) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + break; + default: + IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); + break; + } + + if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && + tbl->action > IWL_SISO_SWITCH_ANTENNA2) { + /* stay in SISO */ + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + } + + /* configure as 1x1 if bt full concurrency */ + if (priv->bt_full_concurrent) { + valid_tx_ant = + first_antenna(priv->eeprom_data->valid_tx_ant); + if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + } + + start_action = tbl->action; + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_SISO_SWITCH_ANTENNA1: + case IWL_SISO_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n"); + if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO && + !priv->bt_full_concurrent && + priv->bt_traffic_load == + IWL_BT_COEX_TRAFFIC_LOAD_NONE) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_MIMO2_AB: + case IWL_SISO_SWITCH_MIMO2_AC: + case IWL_SISO_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + + if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + break; + case IWL_SISO_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n"); + + memcpy(search_tbl, tbl, sz); + if (is_green) { + if (!tbl->is_SGI) + break; + else + IWL_ERR(priv, + "SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(priv, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + case IWL_SISO_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) + tbl->action = IWL_SISO_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO2 + */ +static int rs_move_mimo2_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + u8 update_search_tbl_counter = 0; + int ret; + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + /* nothing */ + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + /* avoid antenna B and MIMO */ + if (tbl->action != IWL_MIMO2_SWITCH_SISO_A) + tbl->action = IWL_MIMO2_SWITCH_SISO_A; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + /* avoid antenna B unless MIMO */ + if (tbl->action == IWL_MIMO2_SWITCH_SISO_B || + tbl->action == IWL_MIMO2_SWITCH_SISO_C) + tbl->action = IWL_MIMO2_SWITCH_SISO_A; + break; + default: + IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); + break; + } + + if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && + (tbl->action < IWL_MIMO2_SWITCH_SISO_A || + tbl->action > IWL_MIMO2_SWITCH_SISO_C)) { + /* switch in SISO */ + tbl->action = IWL_MIMO2_SWITCH_SISO_A; + } + + /* configure as 1x1 if bt full concurrency */ + if (priv->bt_full_concurrent && + (tbl->action < IWL_MIMO2_SWITCH_SISO_A || + tbl->action > IWL_MIMO2_SWITCH_SISO_C)) + tbl->action = IWL_MIMO2_SWITCH_SISO_A; + + start_action = tbl->action; + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO2_SWITCH_ANTENNA1: + case IWL_MIMO2_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n"); + + if (tx_chains_num <= 2) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + update_search_tbl_counter = 1; + goto out; + } + break; + case IWL_MIMO2_SWITCH_SISO_A: + case IWL_MIMO2_SWITCH_SISO_B: + case IWL_MIMO2_SWITCH_SISO_C: + IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) + search_tbl->ant_type = ANT_A; + else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) + search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO2_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n"); + + /* Set up new search table for MIMO2 */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(priv, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + + case IWL_MIMO2_SWITCH_MIMO3_ABC: + IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_ABC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + } + tbl->action++; + if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; + +} + +/* + * Try to switch to new modulation mode from MIMO3 + */ +static int rs_move_mimo3_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct ieee80211_sta *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action; + u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + int ret; + u8 update_search_tbl_counter = 0; + + switch (priv->bt_traffic_load) { + case IWL_BT_COEX_TRAFFIC_LOAD_NONE: + /* nothing */ + break; + case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: + case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: + /* avoid antenna B and MIMO */ + if (tbl->action != IWL_MIMO3_SWITCH_SISO_A) + tbl->action = IWL_MIMO3_SWITCH_SISO_A; + break; + case IWL_BT_COEX_TRAFFIC_LOAD_LOW: + /* avoid antenna B unless MIMO */ + if (tbl->action == IWL_MIMO3_SWITCH_SISO_B || + tbl->action == IWL_MIMO3_SWITCH_SISO_C) + tbl->action = IWL_MIMO3_SWITCH_SISO_A; + break; + default: + IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); + break; + } + + if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && + (tbl->action < IWL_MIMO3_SWITCH_SISO_A || + tbl->action > IWL_MIMO3_SWITCH_SISO_C)) { + /* switch in SISO */ + tbl->action = IWL_MIMO3_SWITCH_SISO_A; + } + + /* configure as 1x1 if bt full concurrency */ + if (priv->bt_full_concurrent && + (tbl->action < IWL_MIMO3_SWITCH_SISO_A || + tbl->action > IWL_MIMO3_SWITCH_SISO_C)) + tbl->action = IWL_MIMO3_SWITCH_SISO_A; + + start_action = tbl->action; + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO3_SWITCH_ANTENNA1: + case IWL_MIMO3_SWITCH_ANTENNA2: + IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n"); + + if (tx_chains_num <= 3) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) + goto out; + break; + case IWL_MIMO3_SWITCH_SISO_A: + case IWL_MIMO3_SWITCH_SISO_B: + case IWL_MIMO3_SWITCH_SISO_C: + IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) + search_tbl->ant_type = ANT_A; + else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) + search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO3_SWITCH_MIMO2_AB: + case IWL_MIMO3_SWITCH_MIMO2_AC: + case IWL_MIMO3_SWITCH_MIMO2_BC: + IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n"); + + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) + goto out; + + break; + + case IWL_MIMO3_SWITCH_GI: + if (!tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_20)) + break; + if (tbl->is_ht40 && !(ht_cap->cap & + IEEE80211_HT_CAP_SGI_40)) + break; + + IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n"); + + /* Set up new search table for MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = + rate_n_flags_from_tbl(priv, search_tbl, + index, is_green); + update_search_tbl_counter = 1; + goto out; + } + tbl->action++; + if (tbl->action > IWL_MIMO3_SWITCH_GI) + tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; + + if (tbl->action == start_action) + break; + } + search_tbl->lq_type = LQ_NONE; + return 0; + out: + lq_sta->search_better_tbl = 1; + tbl->action++; + if (tbl->action > IWL_MIMO3_SWITCH_GI) + tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; + if (update_search_tbl_counter) + search_tbl->action = tbl->action; + + return 0; + +} + +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) +{ + struct iwl_scale_tbl_info *tbl; + int i; + int active_tbl; + int flush_interval_passed = 0; + struct iwl_priv *priv; + + priv = lq_sta->drv; + active_tbl = lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + /* If we've been disallowing search, see if we should now allow it */ + if (lq_sta->stay_in_tbl) { + + /* Elapsed time using current modulation mode */ + if (lq_sta->flush_timer) + flush_interval_passed = + time_after(jiffies, + (unsigned long)(lq_sta->flush_timer + + IWL_RATE_SCALE_FLUSH_INTVL)); + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ + if (force_search || + (lq_sta->total_failed > lq_sta->max_failure_limit) || + (lq_sta->total_success > lq_sta->max_success_limit) || + ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) + && (flush_interval_passed))) { + IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n", + lq_sta->total_failed, + lq_sta->total_success, + flush_interval_passed); + + /* Allow search for new mode */ + lq_sta->stay_in_tbl = 0; /* only place reset */ + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = 0; + + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ + } else { + lq_sta->table_count++; + if (lq_sta->table_count >= + lq_sta->table_count_limit) { + lq_sta->table_count = 0; + + IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n"); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window( + &(tbl->win[i])); + } + } + + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ + if (!lq_sta->stay_in_tbl) { + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + } + } +} + +/* + * setup rate table in uCode + */ +static void rs_update_rate_tbl(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + int index, u8 is_green) +{ + u32 rate; + + /* Update uCode's rate table. */ + rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); + rs_fill_link_cmd(priv, lq_sta, rate); + iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); +} + +/* + * Do rate scaling and search for new modulation mode. + */ +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct sk_buff *skb, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta) +{ + struct ieee80211_hw *hw = priv->hw; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int low = IWL_RATE_INVALID; + int high = IWL_RATE_INVALID; + int index; + int i; + struct iwl_rate_scale_data *window = NULL; + int current_tpt = IWL_INVALID_VALUE; + int low_tpt = IWL_INVALID_VALUE; + int high_tpt = IWL_INVALID_VALUE; + u32 fail_count; + s8 scale_action = 0; + u16 rate_mask; + u8 update_lq = 0; + struct iwl_scale_tbl_info *tbl, *tbl1; + u16 rate_scale_index_msk = 0; + u8 is_green = 0; + u8 active_tbl = 0; + u8 done_search = 0; + u16 high_low; + s32 sr; + u8 tid = IWL_MAX_TID_COUNT; + struct iwl_tid_data *tid_data; + struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; + struct iwl_rxon_context *ctx = sta_priv->ctx; + + IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n"); + + /* Send management frames and NO_ACK data using lowest rate. */ + /* TODO: this could probably be improved.. */ + if (!ieee80211_is_data(hdr->frame_control) || + info->flags & IEEE80211_TX_CTL_NO_ACK) + return; + + lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; + + tid = rs_tl_add_packet(lq_sta, hdr); + if ((tid != IWL_MAX_TID_COUNT) && + (lq_sta->tx_agg_tid_en & (1 << tid))) { + tid_data = &priv->tid_data[lq_sta->lq.sta_id][tid]; + if (tid_data->agg.state == IWL_AGG_OFF) + lq_sta->is_agg = 0; + else + lq_sta->is_agg = 1; + } else + lq_sta->is_agg = 0; + + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + if (is_legacy(tbl->lq_type)) + lq_sta->is_green = 0; + else + lq_sta->is_green = rs_use_green(sta); + is_green = lq_sta->is_green; + + /* current tx rate */ + index = lq_sta->last_txrate_idx; + + IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index, + tbl->lq_type); + + /* rates available for this association, and for modulation mode */ + rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); + + IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask); + + /* mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + /* supp_rates has no CCK bits in A mode */ + rate_scale_index_msk = (u16) (rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_scale_index_msk = (u16) (rate_mask & + lq_sta->supp_rates); + + } else + rate_scale_index_msk = rate_mask; + + if (!rate_scale_index_msk) + rate_scale_index_msk = rate_mask; + + if (!((1 << index) & rate_scale_index_msk)) { + IWL_ERR(priv, "Current Rate is not valid\n"); + if (lq_sta->search_better_tbl) { + /* revert to active table if search table is not valid*/ + tbl->lq_type = LQ_NONE; + lq_sta->search_better_tbl = 0; + tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + /* get "active" rate info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + rs_update_rate_tbl(priv, ctx, lq_sta, tbl, + index, is_green); + } + return; + } + + /* Get expected throughput table and history window for current rate */ + if (!tbl->expected_tpt) { + IWL_ERR(priv, "tbl->expected_tpt is NULL\n"); + return; + } + + /* force user max rate if set by user */ + if ((lq_sta->max_rate_idx != -1) && + (lq_sta->max_rate_idx < index)) { + index = lq_sta->max_rate_idx; + update_lq = 1; + window = &(tbl->win[index]); + goto lq_update; + } + + window = &(tbl->win[index]); + + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ + fail_count = window->counter - window->success_counter; + if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && + (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { + IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d " + "for index %d\n", + window->success_counter, window->counter, index); + + /* Can't calculate this yet; not enough history */ + window->average_tpt = IWL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ + rs_stay_in_table(lq_sta, false); + + goto out; + } + /* Else we have enough samples; calculate estimate of + * actual average throughput */ + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERR(priv, "expected_tpt should have been calculated by now\n"); + window->average_tpt = ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128); + } + + /* If we are searching for better modulation mode, check success. */ + if (lq_sta->search_better_tbl && + (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) { + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ + if (window->average_tpt > lq_sta->last_tpt) { + + IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) + lq_sta->enable_counter = 1; + + /* Swap tables; "search" becomes "active" */ + lq_sta->active_tbl = active_tbl; + current_tpt = window->average_tpt; + + /* Else poor success; go back to mode in "active" table */ + } else { + + IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + /* Nullify "search" table */ + tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ + active_tbl = lq_sta->active_tbl; + tbl = &(lq_sta->lq_info[active_tbl]); + + /* Revert to "active" rate and throughput info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + current_tpt = lq_sta->last_tpt; + + /* Need to set up a new rate table in uCode */ + update_lq = 1; + } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ + lq_sta->search_better_tbl = 0; + done_search = 1; /* Don't switch modes below! */ + goto lq_update; + } + + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ + high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, + tbl->lq_type); + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* If user set max rate, dont allow higher than user constrain */ + if ((lq_sta->max_rate_idx != -1) && + (lq_sta->max_rate_idx < high)) + high = IWL_RATE_INVALID; + + sr = window->success_ratio; + + /* Collect measured throughputs for current and adjacent rates */ + current_tpt = window->average_tpt; + if (low != IWL_RATE_INVALID) + low_tpt = tbl->win[low].average_tpt; + if (high != IWL_RATE_INVALID) + high_tpt = tbl->win[high].average_tpt; + + scale_action = 0; + + /* Too many failures, decrease rate */ + if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { + IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); + scale_action = -1; + + /* No throughput measured yet for adjacent rates; try increase. */ + } else if ((low_tpt == IWL_INVALID_VALUE) && + (high_tpt == IWL_INVALID_VALUE)) { + + if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) + scale_action = 1; + else if (low != IWL_RATE_INVALID) + scale_action = 0; + } + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ + else if ((low_tpt != IWL_INVALID_VALUE) && + (high_tpt != IWL_INVALID_VALUE) && + (low_tpt < current_tpt) && + (high_tpt < current_tpt)) + scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ + else { + /* Higher adjacent rate's throughput is measured */ + if (high_tpt != IWL_INVALID_VALUE) { + /* Higher rate has better throughput */ + if (high_tpt > current_tpt && + sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } else { + scale_action = 0; + } + + /* Lower adjacent rate's throughput is measured */ + } else if (low_tpt != IWL_INVALID_VALUE) { + /* Lower rate has better throughput */ + if (low_tpt > current_tpt) { + IWL_DEBUG_RATE(priv, + "decrease rate because of low tpt\n"); + scale_action = -1; + } else if (sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } + } + } + + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ + if ((scale_action == -1) && (low != IWL_RATE_INVALID) && + ((sr > IWL_RATE_HIGH_TH) || + (current_tpt > (100 * tbl->expected_tpt[low])))) + scale_action = 0; + if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type)) + scale_action = -1; + if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI && + (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) + scale_action = -1; + + if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && + (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { + if (lq_sta->last_bt_traffic > priv->bt_traffic_load) { + /* + * don't set scale_action, don't want to scale up if + * the rate scale doesn't otherwise think that is a + * good idea. + */ + } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) { + scale_action = -1; + } + } + lq_sta->last_bt_traffic = priv->bt_traffic_load; + + if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && + (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { + /* search for a new modulation */ + rs_stay_in_table(lq_sta, true); + goto lq_update; + } + + switch (scale_action) { + case -1: + /* Decrease starting rate, update uCode's rate table */ + if (low != IWL_RATE_INVALID) { + update_lq = 1; + index = low; + } + + break; + case 1: + /* Increase starting rate, update uCode's rate table */ + if (high != IWL_RATE_INVALID) { + update_lq = 1; + index = high; + } + + break; + case 0: + /* No change */ + default: + break; + } + + IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d " + "high %d type %d\n", + index, scale_action, low, high, tbl->lq_type); + +lq_update: + /* Replace uCode's rate table for the destination station. */ + if (update_lq) + rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green); + + if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) { + /* Should we stay with this modulation mode, + * or search for a new one? */ + rs_stay_in_table(lq_sta, false); + } + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { + /* Save current throughput to compare with "search" throughput*/ + lq_sta->last_tpt = current_tpt; + + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ + if (is_legacy(tbl->lq_type)) + rs_move_legacy_other(priv, lq_sta, conf, sta, index); + else if (is_siso(tbl->lq_type)) + rs_move_siso_to_other(priv, lq_sta, conf, sta, index); + else if (is_mimo2(tbl->lq_type)) + rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index); + else + rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index); + + /* If new "search" mode was selected, set up in uCode table */ + if (lq_sta->search_better_tbl) { + /* Access the "search" table, clear its history. */ + tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + + /* Use new "search" start rate */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + + IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n", + tbl->current_rate, index); + rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); + iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); + } else + done_search = 1; + } + + if (done_search && !lq_sta->stay_in_tbl) { + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); + if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) && + lq_sta->action_counter > tbl1->max_search) { + IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n"); + rs_set_stay_in_table(priv, 1, lq_sta); + } + + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ + if (lq_sta->enable_counter && + (lq_sta->action_counter >= tbl1->max_search) && + iwl_ht_enabled(priv)) { + if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && + (lq_sta->tx_agg_tid_en & (1 << tid)) && + (tid != IWL_MAX_TID_COUNT)) { + u8 sta_id = lq_sta->lq.sta_id; + tid_data = &priv->tid_data[sta_id][tid]; + if (tid_data->agg.state == IWL_AGG_OFF) { + IWL_DEBUG_RATE(priv, + "try to aggregate tid %d\n", + tid); + rs_tl_turn_on_agg(priv, tid, + lq_sta, sta); + } + } + rs_set_stay_in_table(priv, 0, lq_sta); + } + } + +out: + tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); + lq_sta->last_txrate_idx = index; +} + +/** + * rs_initialize_lq - Initialize a station's hardware rate table + * + * The uCode's station table contains a table of fallback rates + * for automatic fallback during transmission. + * + * NOTE: This sets up a default set of values. These will be replaced later + * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of + * rc80211_simple. + * + * NOTE: Run REPLY_ADD_STA command to set up station table entry, before + * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void rs_initialize_lq(struct iwl_priv *priv, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta) +{ + struct iwl_scale_tbl_info *tbl; + int rate_idx; + int i; + u32 rate; + u8 use_green = rs_use_green(sta); + u8 active_tbl = 0; + u8 valid_tx_ant; + struct iwl_station_priv *sta_priv; + struct iwl_rxon_context *ctx; + + if (!sta || !lq_sta) + return; + + sta_priv = (void *)sta->drv_priv; + ctx = sta_priv->ctx; + + i = lq_sta->last_txrate_idx; + + valid_tx_ant = priv->eeprom_data->valid_tx_ant; + + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + if ((i < 0) || (i >= IWL_RATE_COUNT)) + i = 0; + + rate = iwl_rates[i].plcp; + tbl->ant_type = first_antenna(valid_tx_ant); + rate |= tbl->ant_type << RATE_MCS_ANT_POS; + + if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) + rate |= RATE_MCS_CCK_MSK; + + rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); + if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + rs_toggle_antenna(valid_tx_ant, &rate, tbl); + + rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green); + tbl->current_rate = rate; + rs_set_expected_tpt_table(lq_sta, tbl); + rs_fill_link_cmd(NULL, lq_sta, rate); + priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq; + iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true); +} + +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) +{ + + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; + struct iwl_op_mode *op_mode __maybe_unused = + (struct iwl_op_mode *)priv_r; + struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_lq_sta *lq_sta = priv_sta; + int rate_idx; + + IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n"); + + /* Get max rate if user set max rate */ + if (lq_sta) { + lq_sta->max_rate_idx = txrc->max_rate_idx; + if ((sband->band == IEEE80211_BAND_5GHZ) && + (lq_sta->max_rate_idx != -1)) + lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; + if ((lq_sta->max_rate_idx < 0) || + (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) + lq_sta->max_rate_idx = -1; + } + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (lq_sta && !lq_sta->drv) { + IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); + priv_sta = NULL; + } + + /* Send management frames and NO_ACK data using lowest rate. */ + if (rate_control_send_low(sta, priv_sta, txrc)) + return; + + rate_idx = lq_sta->last_txrate_idx; + + if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { + rate_idx -= IWL_FIRST_OFDM_RATE; + /* 6M and 9M shared same MCS index */ + rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; + if (rs_extract_rate(lq_sta->last_rate_n_flags) >= + IWL_RATE_MIMO3_6M_PLCP) + rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); + else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= + IWL_RATE_MIMO2_6M_PLCP) + rate_idx = rate_idx + MCS_INDEX_PER_STREAM; + info->control.rates[0].flags = IEEE80211_TX_RC_MCS; + if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI; + if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA; + if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK) + info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD; + } else { + /* Check for invalid rates */ + if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) || + ((sband->band == IEEE80211_BAND_5GHZ) && + (rate_idx < IWL_FIRST_OFDM_RATE))) + rate_idx = rate_lowest_index(sband, sta); + /* On valid 5 GHz rate, adjust index */ + else if (sband->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + info->control.rates[0].flags = 0; + } + info->control.rates[0].idx = rate_idx; + +} + +static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, + gfp_t gfp) +{ + struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv; + struct iwl_op_mode *op_mode __maybe_unused = + (struct iwl_op_mode *)priv_rate; + struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); + + IWL_DEBUG_RATE(priv, "create station rate scale window\n"); + + return &sta_priv->lq_sta; +} + +/* + * Called after adding a new station to initialize rate scaling + */ +void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) +{ + int i, j; + struct ieee80211_hw *hw = priv->hw; + struct ieee80211_conf *conf = &priv->hw->conf; + struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; + struct iwl_station_priv *sta_priv; + struct iwl_lq_sta *lq_sta; + struct ieee80211_supported_band *sband; + unsigned long supp; /* must be unsigned long for for_each_set_bit */ + + sta_priv = (struct iwl_station_priv *) sta->drv_priv; + lq_sta = &sta_priv->lq_sta; + sband = hw->wiphy->bands[conf->channel->band]; + + + lq_sta->lq.sta_id = sta_id; + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + lq_sta->flush_timer = 0; + lq_sta->supp_rates = sta->supp_rates[sband->band]; + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n", + sta_id); + /* TODO: what is a good starting rate for STA? About middle? Maybe not + * the lowest or the highest rate.. Could consider using RSSI from + * previous packets? Need to have IEEE 802.1X auth succeed immediately + * after assoc.. */ + + lq_sta->is_dup = 0; + lq_sta->max_rate_idx = -1; + lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; + lq_sta->is_green = rs_use_green(sta); + lq_sta->band = sband->band; + /* + * active legacy rates as per supported rates bitmap + */ + supp = sta->supp_rates[sband->band]; + lq_sta->active_legacy_rate = 0; + for_each_set_bit(i, &supp, BITS_PER_LONG) + lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value); + + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ + lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; + lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; + lq_sta->active_siso_rate &= ~((u16)0x2); + lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; + + /* Same here */ + lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; + lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16)0x2); + lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; + + lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; + lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; + lq_sta->active_mimo3_rate &= ~((u16)0x2); + lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; + + IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", + lq_sta->active_siso_rate, + lq_sta->active_mimo2_rate, + lq_sta->active_mimo3_rate); + + /* These values will be overridden later */ + lq_sta->lq.general_params.single_stream_ant_msk = + first_antenna(priv->eeprom_data->valid_tx_ant); + lq_sta->lq.general_params.dual_stream_ant_msk = + priv->eeprom_data->valid_tx_ant & + ~first_antenna(priv->eeprom_data->valid_tx_ant); + if (!lq_sta->lq.general_params.dual_stream_ant_msk) { + lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; + } else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) { + lq_sta->lq.general_params.dual_stream_ant_msk = + priv->eeprom_data->valid_tx_ant; + } + + /* as default allow aggregation for all tids */ + lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; + lq_sta->drv = priv; + + /* Set last_txrate_idx to lowest rate */ + lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); + if (sband->band == IEEE80211_BAND_5GHZ) + lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + lq_sta->is_agg = 0; +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + priv->tm_fixed_rate = 0; +#endif +#ifdef CONFIG_MAC80211_DEBUGFS + lq_sta->dbg_fixed_rate = 0; +#endif + + rs_initialize_lq(priv, sta, lq_sta); +} + +static void rs_fill_link_cmd(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 new_rate) +{ + struct iwl_scale_tbl_info tbl_type; + int index = 0; + int rate_idx; + int repeat_rate = 0; + u8 ant_toggle_cnt = 0; + u8 use_ht_possible = 1; + u8 valid_tx_ant = 0; + struct iwl_station_priv *sta_priv = + container_of(lq_sta, struct iwl_station_priv, lq_sta); + struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; + + /* Override starting rate (index 0) if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Interpret new_rate (rate_n_flags) */ + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, + &tbl_type, &rate_idx); + + if (priv && priv->bt_full_concurrent) { + /* 1x1 only */ + tbl_type.ant_type = + first_antenna(priv->eeprom_data->valid_tx_ant); + } + + /* How many times should we repeat the initial rate? */ + if (is_legacy(tbl_type.lq_type)) { + ant_toggle_cnt = 1; + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = min(IWL_HT_NUMBER_TRY, + LINK_QUAL_AGG_DISABLE_START_DEF - 1); + } + + lq_cmd->general_params.mimo_delimiter = + is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (index 0) */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + if (num_of_ant(tbl_type.ant_type) == 1) { + lq_cmd->general_params.single_stream_ant_msk = + tbl_type.ant_type; + } else if (num_of_ant(tbl_type.ant_type) == 2) { + lq_cmd->general_params.dual_stream_ant_msk = + tbl_type.ant_type; + } /* otherwise we don't modify the existing value */ + + index++; + repeat_rate--; + if (priv) { + if (priv->bt_full_concurrent) + valid_tx_ant = ANT_A; + else + valid_tx_ant = priv->eeprom_data->valid_tx_ant; + } + + /* Fill rest of rate table */ + while (index < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. + * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ + while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + } + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = + cpu_to_le32(new_rate); + repeat_rate--; + index++; + } + + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, + &rate_idx); + + if (priv && priv->bt_full_concurrent) { + /* 1x1 only */ + tbl_type.ant_type = + first_antenna(priv->eeprom_data->valid_tx_ant); + } + + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ + if (is_mimo(tbl_type.lq_type)) + lq_cmd->general_params.mimo_delimiter = index; + + /* Get next rate */ + new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); + + /* How many times should we repeat the next rate? */ + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + /* Don't allow HT rates after next pass. + * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ + use_ht_possible = 0; + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + index++; + repeat_rate--; + } + + lq_cmd->agg_params.agg_frame_cnt_limit = + sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF; + lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + + lq_cmd->agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); + /* + * overwrite if needed, pass aggregation time limit + * to uCode in uSec + */ + if (priv && priv->cfg->bt_params && + priv->cfg->bt_params->agg_time_limit && + priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) + lq_cmd->agg_params.agg_time_limit = + cpu_to_le16(priv->cfg->bt_params->agg_time_limit); +} + +static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) +{ + return hw->priv; +} +/* rate scale requires free function to be implemented */ +static void rs_free(void *priv_rate) +{ + return; +} + +static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, + void *priv_sta) +{ + struct iwl_op_mode *op_mode __maybe_unused = priv_r; + struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); + + IWL_DEBUG_RATE(priv, "enter\n"); + IWL_DEBUG_RATE(priv, "leave\n"); +} + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{ + struct iwl_priv *priv; + u8 valid_tx_ant; + u8 ant_sel_tx; + + priv = lq_sta->drv; + valid_tx_ant = priv->eeprom_data->valid_tx_ant; + if (lq_sta->dbg_fixed_rate) { + ant_sel_tx = + ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) + >> RATE_MCS_ANT_POS); + if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + IWL_DEBUG_RATE(priv, "Fixed rate ON\n"); + } else { + lq_sta->dbg_fixed_rate = 0; + IWL_ERR(priv, + "Invalid antenna selection 0x%X, Valid is 0x%X\n", + ant_sel_tx, valid_tx_ant); + IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); + } + } else { + IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); + } +} + +static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_priv *priv; + char buf[64]; + size_t buf_size; + u32 parsed_rate; + + + priv = lq_sta->drv; + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &parsed_rate) == 1) + lq_sta->dbg_fixed_rate = parsed_rate; + else + lq_sta->dbg_fixed_rate = 0; + + rs_program_fix_rate(priv, lq_sta); + + return count; +} + +static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i = 0; + int index = 0; + ssize_t ret; + + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_priv *priv; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + + priv = lq_sta->drv; + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); + desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", + lq_sta->total_failed, lq_sta->total_success, + lq_sta->active_legacy_rate); + desc += sprintf(buff+desc, "fixed rate 0x%X\n", + lq_sta->dbg_fixed_rate); + desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", + (priv->eeprom_data->valid_tx_ant & ANT_A) ? "ANT_A," : "", + (priv->eeprom_data->valid_tx_ant & ANT_B) ? "ANT_B," : "", + (priv->eeprom_data->valid_tx_ant & ANT_C) ? "ANT_C" : ""); + desc += sprintf(buff+desc, "lq type %s\n", + (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); + if (is_Ht(tbl->lq_type)) { + desc += sprintf(buff+desc, " %s", + (is_siso(tbl->lq_type)) ? "SISO" : + ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); + desc += sprintf(buff+desc, " %s", + (tbl->is_ht40) ? "40MHz" : "20MHz"); + desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "", + (lq_sta->is_green) ? "GF enabled" : "", + (lq_sta->is_agg) ? "AGG on" : ""); + } + desc += sprintf(buff+desc, "last tx rate=0x%X\n", + lq_sta->last_rate_n_flags); + desc += sprintf(buff+desc, "general:" + "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", + lq_sta->lq.general_params.flags, + lq_sta->lq.general_params.mimo_delimiter, + lq_sta->lq.general_params.single_stream_ant_msk, + lq_sta->lq.general_params.dual_stream_ant_msk); + + desc += sprintf(buff+desc, "agg:" + "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", + le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), + lq_sta->lq.agg_params.agg_dis_start_th, + lq_sta->lq.agg_params.agg_frame_cnt_limit); + + desc += sprintf(buff+desc, + "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", + lq_sta->lq.general_params.start_rate_index[0], + lq_sta->lq.general_params.start_rate_index[1], + lq_sta->lq.general_params.start_rate_index[2], + lq_sta->lq.general_params.start_rate_index[3]); + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + index = iwl_hwrate_to_plcp_idx( + le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); + if (is_legacy(tbl->lq_type)) { + desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), + iwl_rate_mcs[index].mbps); + } else { + desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), + iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs); + } + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_scale_table_ops = { + .write = rs_sta_dbgfs_scale_table_write, + .read = rs_sta_dbgfs_scale_table_read, + .open = simple_open, + .llseek = default_llseek, +}; +static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char *buff; + int desc = 0; + int i, j; + ssize_t ret; + + struct iwl_lq_sta *lq_sta = file->private_data; + + buff = kmalloc(1024, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + for (i = 0; i < LQ_SIZE; i++) { + desc += sprintf(buff+desc, + "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n" + "rate=0x%X\n", + lq_sta->active_tbl == i ? "*" : "x", + lq_sta->lq_info[i].lq_type, + lq_sta->lq_info[i].is_SGI, + lq_sta->lq_info[i].is_ht40, + lq_sta->lq_info[i].is_dup, + lq_sta->is_green, + lq_sta->lq_info[i].current_rate); + for (j = 0; j < IWL_RATE_COUNT; j++) { + desc += sprintf(buff+desc, + "counter=%d success=%d %%=%d\n", + lq_sta->lq_info[i].win[j].counter, + lq_sta->lq_info[i].win[j].success_counter, + lq_sta->lq_info[i].win[j].success_ratio); + } + } + ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); + kfree(buff); + return ret; +} + +static const struct file_operations rs_sta_dbgfs_stats_table_ops = { + .read = rs_sta_dbgfs_stats_table_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + char buff[120]; + int desc = 0; + + if (is_Ht(tbl->lq_type)) + desc += sprintf(buff+desc, + "Bit Rate= %d Mb/s\n", + tbl->expected_tpt[lq_sta->last_txrate_idx]); + else + desc += sprintf(buff+desc, + "Bit Rate= %d Mb/s\n", + iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); + + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { + .read = rs_sta_dbgfs_rate_scale_data_read, + .open = simple_open, + .llseek = default_llseek, +}; + +static void rs_add_debugfs(void *priv, void *priv_sta, + struct dentry *dir) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + lq_sta->rs_sta_dbgfs_scale_table_file = + debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, + lq_sta, &rs_sta_dbgfs_scale_table_ops); + lq_sta->rs_sta_dbgfs_stats_table_file = + debugfs_create_file("rate_stats_table", S_IRUSR, dir, + lq_sta, &rs_sta_dbgfs_stats_table_ops); + lq_sta->rs_sta_dbgfs_rate_scale_data_file = + debugfs_create_file("rate_scale_data", S_IRUSR, dir, + lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); + lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = + debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, + &lq_sta->tx_agg_tid_en); + +} + +static void rs_remove_debugfs(void *priv, void *priv_sta) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); +} +#endif + +/* + * Initialization of rate scaling information is done by driver after + * the station is added. Since mac80211 calls this function before a + * station is added we ignore it. + */ +static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) +{ +} +static struct rate_control_ops rs_ops = { + .module = NULL, + .name = RS_NAME, + .tx_status = rs_tx_status, + .get_rate = rs_get_rate, + .rate_init = rs_rate_init_stub, + .alloc = rs_alloc, + .free = rs_free, + .alloc_sta = rs_alloc_sta, + .free_sta = rs_free_sta, +#ifdef CONFIG_MAC80211_DEBUGFS + .add_sta_debugfs = rs_add_debugfs, + .remove_sta_debugfs = rs_remove_debugfs, +#endif +}; + +int iwlagn_rate_control_register(void) +{ + return ieee80211_rate_control_register(&rs_ops); +} + +void iwlagn_rate_control_unregister(void) +{ + ieee80211_rate_control_unregister(&rs_ops); +} + diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.h b/drivers/net/wireless/iwlwifi/dvm/rs.h new file mode 100644 index 00000000000..ad3aea8f626 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/rs.h @@ -0,0 +1,433 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __iwl_agn_rs_h__ +#define __iwl_agn_rs_h__ + +#include <net/mac80211.h> + +#include "iwl-config.h" + +#include "commands.h" + +struct iwl_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +/* + * These serve as indexes into + * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ + IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */ + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +enum { + IWL_RATE_6M_INDEX_TABLE = 0, + IWL_RATE_9M_INDEX_TABLE, + IWL_RATE_12M_INDEX_TABLE, + IWL_RATE_18M_INDEX_TABLE, + IWL_RATE_24M_INDEX_TABLE, + IWL_RATE_36M_INDEX_TABLE, + IWL_RATE_48M_INDEX_TABLE, + IWL_RATE_54M_INDEX_TABLE, + IWL_RATE_1M_INDEX_TABLE, + IWL_RATE_2M_INDEX_TABLE, + IWL_RATE_5M_INDEX_TABLE, + IWL_RATE_11M_INDEX_TABLE, + IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1, +}; + +enum { + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + +/* uCode API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, + /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ + /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ +}; + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 6400 /* 50% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA1 0 +#define IWL_LEGACY_SWITCH_ANTENNA2 1 +#define IWL_LEGACY_SWITCH_SISO 2 +#define IWL_LEGACY_SWITCH_MIMO2_AB 3 +#define IWL_LEGACY_SWITCH_MIMO2_AC 4 +#define IWL_LEGACY_SWITCH_MIMO2_BC 5 +#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA1 0 +#define IWL_SISO_SWITCH_ANTENNA2 1 +#define IWL_SISO_SWITCH_MIMO2_AB 2 +#define IWL_SISO_SWITCH_MIMO2_AC 3 +#define IWL_SISO_SWITCH_MIMO2_BC 4 +#define IWL_SISO_SWITCH_GI 5 +#define IWL_SISO_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo mode */ +#define IWL_MIMO2_SWITCH_ANTENNA1 0 +#define IWL_MIMO2_SWITCH_ANTENNA2 1 +#define IWL_MIMO2_SWITCH_SISO_A 2 +#define IWL_MIMO2_SWITCH_SISO_B 3 +#define IWL_MIMO2_SWITCH_SISO_C 4 +#define IWL_MIMO2_SWITCH_GI 5 +#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo3 mode */ +#define IWL_MIMO3_SWITCH_ANTENNA1 0 +#define IWL_MIMO3_SWITCH_ANTENNA2 1 +#define IWL_MIMO3_SWITCH_SISO_A 2 +#define IWL_MIMO3_SWITCH_SISO_B 3 +#define IWL_MIMO3_SWITCH_SISO_C 4 +#define IWL_MIMO3_SWITCH_MIMO2_AB 5 +#define IWL_MIMO3_SWITCH_MIMO2_AC 6 +#define IWL_MIMO3_SWITCH_MIMO2_BC 7 +#define IWL_MIMO3_SWITCH_GI 8 + + +#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI +#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC + +/*FIXME:RS:add possible actions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define IWL_MAX_MCS_DISPLAY_SIZE 12 + +struct iwl_rate_mcs_info { + char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_ht40; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + u8 max_search; /* maximun number of tables we can search */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u64 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + u8 is_dup; + enum ieee80211_band band; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + s8 max_rate_idx; /* Max rate set by user */ + u8 missed_rate_counter; + + struct iwl_link_quality_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[IWL_MAX_TID_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_rate_scale_data_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct iwl_priv *drv; + + /* used to be in sta_info */ + int last_txrate_idx; + /* last tx rate_n_flags */ + u32 last_rate_n_flags; + /* packets destined for this STA are aggregated */ + u8 is_agg; + /* BT traffic this sta was last updated in */ + u8 last_bt_traffic; +}; + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +static inline u8 first_antenna(u8 mask) +{ + if (mask & ANT_A) + return ANT_A; + if (mask & ANT_B) + return ANT_B; + return ANT_C; +} + + +/* Initialize station's rate scaling information after adding station */ +extern void iwl_rs_rate_init(struct iwl_priv *priv, + struct ieee80211_sta *sta, u8 sta_id); + +/** + * iwl_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +extern int iwlagn_rate_control_register(void); + +/** + * iwl_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +extern void iwlagn_rate_control_unregister(void); + +#endif /* __iwl_agn__rs__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c new file mode 100644 index 00000000000..fee5cffa166 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -0,0 +1,1142 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portionhelp of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/etherdevice.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <net/mac80211.h> +#include <asm/unaligned.h> +#include "iwl-io.h" +#include "dev.h" +#include "calib.h" +#include "agn.h" + +#define IWL_CMD_ENTRY(x) [x] = #x + +const char *iwl_dvm_cmd_strings[REPLY_MAX] = { + IWL_CMD_ENTRY(REPLY_ALIVE), + IWL_CMD_ENTRY(REPLY_ERROR), + IWL_CMD_ENTRY(REPLY_ECHO), + IWL_CMD_ENTRY(REPLY_RXON), + IWL_CMD_ENTRY(REPLY_RXON_ASSOC), + IWL_CMD_ENTRY(REPLY_QOS_PARAM), + IWL_CMD_ENTRY(REPLY_RXON_TIMING), + IWL_CMD_ENTRY(REPLY_ADD_STA), + IWL_CMD_ENTRY(REPLY_REMOVE_STA), + IWL_CMD_ENTRY(REPLY_REMOVE_ALL_STA), + IWL_CMD_ENTRY(REPLY_TXFIFO_FLUSH), + IWL_CMD_ENTRY(REPLY_WEPKEY), + IWL_CMD_ENTRY(REPLY_TX), + IWL_CMD_ENTRY(REPLY_LEDS_CMD), + IWL_CMD_ENTRY(REPLY_TX_LINK_QUALITY_CMD), + IWL_CMD_ENTRY(COEX_PRIORITY_TABLE_CMD), + IWL_CMD_ENTRY(COEX_MEDIUM_NOTIFICATION), + IWL_CMD_ENTRY(COEX_EVENT_CMD), + IWL_CMD_ENTRY(REPLY_QUIET_CMD), + IWL_CMD_ENTRY(REPLY_CHANNEL_SWITCH), + IWL_CMD_ENTRY(CHANNEL_SWITCH_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_SPECTRUM_MEASUREMENT_CMD), + IWL_CMD_ENTRY(SPECTRUM_MEASURE_NOTIFICATION), + IWL_CMD_ENTRY(POWER_TABLE_CMD), + IWL_CMD_ENTRY(PM_SLEEP_NOTIFICATION), + IWL_CMD_ENTRY(PM_DEBUG_STATISTIC_NOTIFIC), + IWL_CMD_ENTRY(REPLY_SCAN_CMD), + IWL_CMD_ENTRY(REPLY_SCAN_ABORT_CMD), + IWL_CMD_ENTRY(SCAN_START_NOTIFICATION), + IWL_CMD_ENTRY(SCAN_RESULTS_NOTIFICATION), + IWL_CMD_ENTRY(SCAN_COMPLETE_NOTIFICATION), + IWL_CMD_ENTRY(BEACON_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_TX_BEACON), + IWL_CMD_ENTRY(WHO_IS_AWAKE_NOTIFICATION), + IWL_CMD_ENTRY(QUIET_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_TX_PWR_TABLE_CMD), + IWL_CMD_ENTRY(MEASURE_ABORT_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_BT_CONFIG), + IWL_CMD_ENTRY(REPLY_STATISTICS_CMD), + IWL_CMD_ENTRY(STATISTICS_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_CARD_STATE_CMD), + IWL_CMD_ENTRY(CARD_STATE_NOTIFICATION), + IWL_CMD_ENTRY(MISSED_BEACONS_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_CT_KILL_CONFIG_CMD), + IWL_CMD_ENTRY(SENSITIVITY_CMD), + IWL_CMD_ENTRY(REPLY_PHY_CALIBRATION_CMD), + IWL_CMD_ENTRY(REPLY_RX_PHY_CMD), + IWL_CMD_ENTRY(REPLY_RX_MPDU_CMD), + IWL_CMD_ENTRY(REPLY_COMPRESSED_BA), + IWL_CMD_ENTRY(CALIBRATION_CFG_CMD), + IWL_CMD_ENTRY(CALIBRATION_RES_NOTIFICATION), + IWL_CMD_ENTRY(CALIBRATION_COMPLETE_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_TX_POWER_DBM_CMD), + IWL_CMD_ENTRY(TEMPERATURE_NOTIFICATION), + IWL_CMD_ENTRY(TX_ANT_CONFIGURATION_CMD), + IWL_CMD_ENTRY(REPLY_BT_COEX_PROFILE_NOTIF), + IWL_CMD_ENTRY(REPLY_BT_COEX_PRIO_TABLE), + IWL_CMD_ENTRY(REPLY_BT_COEX_PROT_ENV), + IWL_CMD_ENTRY(REPLY_WIPAN_PARAMS), + IWL_CMD_ENTRY(REPLY_WIPAN_RXON), + IWL_CMD_ENTRY(REPLY_WIPAN_RXON_TIMING), + IWL_CMD_ENTRY(REPLY_WIPAN_RXON_ASSOC), + IWL_CMD_ENTRY(REPLY_WIPAN_QOS_PARAM), + IWL_CMD_ENTRY(REPLY_WIPAN_WEPKEY), + IWL_CMD_ENTRY(REPLY_WIPAN_P2P_CHANNEL_SWITCH), + IWL_CMD_ENTRY(REPLY_WIPAN_NOA_NOTIFICATION), + IWL_CMD_ENTRY(REPLY_WIPAN_DEACTIVATION_COMPLETE), + IWL_CMD_ENTRY(REPLY_WOWLAN_PATTERNS), + IWL_CMD_ENTRY(REPLY_WOWLAN_WAKEUP_FILTER), + IWL_CMD_ENTRY(REPLY_WOWLAN_TSC_RSC_PARAMS), + IWL_CMD_ENTRY(REPLY_WOWLAN_TKIP_PARAMS), + IWL_CMD_ENTRY(REPLY_WOWLAN_KEK_KCK_MATERIAL), + IWL_CMD_ENTRY(REPLY_WOWLAN_GET_STATUS), + IWL_CMD_ENTRY(REPLY_D3_CONFIG), +}; +#undef IWL_CMD_ENTRY + +/****************************************************************************** + * + * Generic RX handler implementations + * + ******************************************************************************/ + +static int iwlagn_rx_reply_error(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_error_resp *err_resp = (void *)pkt->data; + + IWL_ERR(priv, "Error Reply type 0x%08X cmd REPLY_ERROR (0x%02X) " + "seq 0x%04X ser 0x%08X\n", + le32_to_cpu(err_resp->error_type), + err_resp->cmd_id, + le16_to_cpu(err_resp->bad_cmd_seq_num), + le32_to_cpu(err_resp->error_info)); + return 0; +} + +static int iwlagn_rx_csa(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_csa_notification *csa = (void *)pkt->data; + /* + * MULTI-FIXME + * See iwlagn_mac_channel_switch. + */ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwl_rxon_cmd *rxon = (void *)&ctx->active; + + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return 0; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", + le16_to_cpu(csa->channel)); + iwl_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_chswitch_done(priv, false); + } + return 0; +} + + +static int iwlagn_rx_spectrum_measure_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_spectrum_notification *report = (void *)pkt->data; + + if (!report->state) { + IWL_DEBUG_11H(priv, + "Spectrum Measure Notification: Start\n"); + return 0; + } + + memcpy(&priv->measure_report, report, sizeof(*report)); + priv->measurement_status |= MEASUREMENT_READY; + return 0; +} + +static int iwlagn_rx_pm_sleep_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_sleep_notification *sleep = (void *)pkt->data; + IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n", + sleep->pm_sleep_mode, sleep->pm_wakeup_src); +#endif + return 0; +} + +static int iwlagn_rx_pm_debug_statistics_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u32 __maybe_unused len = + le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled " + "notification for PM_DEBUG_STATISTIC_NOTIFIC:\n", len); + iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->data, len); + return 0; +} + +static int iwlagn_rx_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwlagn_beacon_notif *beacon = (void *)pkt->data; +#ifdef CONFIG_IWLWIFI_DEBUG + u16 status = le16_to_cpu(beacon->beacon_notify_hdr.status.status); + u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); + + IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d " + "tsf:0x%.8x%.8x rate:%d\n", + status & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), + le32_to_cpu(beacon->low_tsf), rate); +#endif + + priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); + + return 0; +} + +/** + * iwl_good_plcp_health - checks for plcp error. + * + * When the plcp error is exceeding the thresholds, reset the radio + * to improve the throughput. + */ +static bool iwlagn_good_plcp_health(struct iwl_priv *priv, + struct statistics_rx_phy *cur_ofdm, + struct statistics_rx_ht_phy *cur_ofdm_ht, + unsigned int msecs) +{ + int delta; + int threshold = priv->plcp_delta_threshold; + + if (threshold == IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) { + IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n"); + return true; + } + + delta = le32_to_cpu(cur_ofdm->plcp_err) - + le32_to_cpu(priv->statistics.rx_ofdm.plcp_err) + + le32_to_cpu(cur_ofdm_ht->plcp_err) - + le32_to_cpu(priv->statistics.rx_ofdm_ht.plcp_err); + + /* Can be negative if firmware reset statistics */ + if (delta <= 0) + return true; + + if ((delta * 100 / msecs) > threshold) { + IWL_DEBUG_RADIO(priv, + "plcp health threshold %u delta %d msecs %u\n", + threshold, delta, msecs); + return false; + } + + return true; +} + +int iwl_force_rf_reset(struct iwl_priv *priv, bool external) +{ + struct iwl_rf_reset *rf_reset; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return -EAGAIN; + + if (!iwl_is_any_associated(priv)) { + IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n"); + return -ENOLINK; + } + + rf_reset = &priv->rf_reset; + rf_reset->reset_request_count++; + if (!external && rf_reset->last_reset_jiffies && + time_after(rf_reset->last_reset_jiffies + + IWL_DELAY_NEXT_FORCE_RF_RESET, jiffies)) { + IWL_DEBUG_INFO(priv, "RF reset rejected\n"); + rf_reset->reset_reject_count++; + return -EAGAIN; + } + rf_reset->reset_success_count++; + rf_reset->last_reset_jiffies = jiffies; + + /* + * There is no easy and better way to force reset the radio, + * the only known method is switching channel which will force to + * reset and tune the radio. + * Use internal short scan (single channel) operation to should + * achieve this objective. + * Driver should reset the radio when number of consecutive missed + * beacon, or any other uCode error condition detected. + */ + IWL_DEBUG_INFO(priv, "perform radio reset.\n"); + iwl_internal_short_hw_scan(priv); + return 0; +} + + +static void iwlagn_recover_from_statistics(struct iwl_priv *priv, + struct statistics_rx_phy *cur_ofdm, + struct statistics_rx_ht_phy *cur_ofdm_ht, + struct statistics_tx *tx, + unsigned long stamp) +{ + unsigned int msecs; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + msecs = jiffies_to_msecs(stamp - priv->rx_statistics_jiffies); + + /* Only gather statistics and update time stamp when not associated */ + if (!iwl_is_any_associated(priv)) + return; + + /* Do not check/recover when do not have enough statistics data */ + if (msecs < 99) + return; + + if (iwlwifi_mod_params.plcp_check && + !iwlagn_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs)) + iwl_force_rf_reset(priv, false); +} + +/* Calculate noise level, based on measurements during network silence just + * before arriving beacon. This measurement can be done only if we know + * exactly when to expect beacons, therefore only when we're associated. */ +static void iwlagn_rx_calc_noise(struct iwl_priv *priv) +{ + struct statistics_rx_non_phy *rx_info; + int num_active_rx = 0; + int total_silence = 0; + int bcn_silence_a, bcn_silence_b, bcn_silence_c; + int last_rx_noise; + + rx_info = &priv->statistics.rx_non_phy; + + bcn_silence_a = + le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; + bcn_silence_b = + le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; + bcn_silence_c = + le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; + + if (bcn_silence_a) { + total_silence += bcn_silence_a; + num_active_rx++; + } + if (bcn_silence_b) { + total_silence += bcn_silence_b; + num_active_rx++; + } + if (bcn_silence_c) { + total_silence += bcn_silence_c; + num_active_rx++; + } + + /* Average among active antennas */ + if (num_active_rx) + last_rx_noise = (total_silence / num_active_rx) - 107; + else + last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; + + IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n", + bcn_silence_a, bcn_silence_b, bcn_silence_c, + last_rx_noise); +} + +#ifdef CONFIG_IWLWIFI_DEBUGFS +/* + * based on the assumption of all statistics counter are in DWORD + * FIXME: This function is for debugging, do not deal with + * the case of counters roll-over. + */ +static void accum_stats(__le32 *prev, __le32 *cur, __le32 *delta, + __le32 *max_delta, __le32 *accum, int size) +{ + int i; + + for (i = 0; + i < size / sizeof(__le32); + i++, prev++, cur++, delta++, max_delta++, accum++) { + if (le32_to_cpu(*cur) > le32_to_cpu(*prev)) { + *delta = cpu_to_le32( + le32_to_cpu(*cur) - le32_to_cpu(*prev)); + le32_add_cpu(accum, le32_to_cpu(*delta)); + if (le32_to_cpu(*delta) > le32_to_cpu(*max_delta)) + *max_delta = *delta; + } + } +} + +static void +iwlagn_accumulative_statistics(struct iwl_priv *priv, + struct statistics_general_common *common, + struct statistics_rx_non_phy *rx_non_phy, + struct statistics_rx_phy *rx_ofdm, + struct statistics_rx_ht_phy *rx_ofdm_ht, + struct statistics_rx_phy *rx_cck, + struct statistics_tx *tx, + struct statistics_bt_activity *bt_activity) +{ +#define ACCUM(_name) \ + accum_stats((__le32 *)&priv->statistics._name, \ + (__le32 *)_name, \ + (__le32 *)&priv->delta_stats._name, \ + (__le32 *)&priv->max_delta_stats._name, \ + (__le32 *)&priv->accum_stats._name, \ + sizeof(*_name)); + + ACCUM(common); + ACCUM(rx_non_phy); + ACCUM(rx_ofdm); + ACCUM(rx_ofdm_ht); + ACCUM(rx_cck); + ACCUM(tx); + if (bt_activity) + ACCUM(bt_activity); +#undef ACCUM +} +#else +static inline void +iwlagn_accumulative_statistics(struct iwl_priv *priv, + struct statistics_general_common *common, + struct statistics_rx_non_phy *rx_non_phy, + struct statistics_rx_phy *rx_ofdm, + struct statistics_rx_ht_phy *rx_ofdm_ht, + struct statistics_rx_phy *rx_cck, + struct statistics_tx *tx, + struct statistics_bt_activity *bt_activity) +{ +} +#endif + +static int iwlagn_rx_statistics(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + unsigned long stamp = jiffies; + const int reg_recalib_period = 60; + int change; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + __le32 *flag; + struct statistics_general_common *common; + struct statistics_rx_non_phy *rx_non_phy; + struct statistics_rx_phy *rx_ofdm; + struct statistics_rx_ht_phy *rx_ofdm_ht; + struct statistics_rx_phy *rx_cck; + struct statistics_tx *tx; + struct statistics_bt_activity *bt_activity; + + len -= sizeof(struct iwl_cmd_header); /* skip header */ + + IWL_DEBUG_RX(priv, "Statistics notification received (%d bytes).\n", + len); + + spin_lock(&priv->statistics.lock); + + if (len == sizeof(struct iwl_bt_notif_statistics)) { + struct iwl_bt_notif_statistics *stats; + stats = (void *)&pkt->data; + flag = &stats->flag; + common = &stats->general.common; + rx_non_phy = &stats->rx.general.common; + rx_ofdm = &stats->rx.ofdm; + rx_ofdm_ht = &stats->rx.ofdm_ht; + rx_cck = &stats->rx.cck; + tx = &stats->tx; + bt_activity = &stats->general.activity; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + /* handle this exception directly */ + priv->statistics.num_bt_kills = stats->rx.general.num_bt_kills; + le32_add_cpu(&priv->statistics.accum_num_bt_kills, + le32_to_cpu(stats->rx.general.num_bt_kills)); +#endif + } else if (len == sizeof(struct iwl_notif_statistics)) { + struct iwl_notif_statistics *stats; + stats = (void *)&pkt->data; + flag = &stats->flag; + common = &stats->general.common; + rx_non_phy = &stats->rx.general; + rx_ofdm = &stats->rx.ofdm; + rx_ofdm_ht = &stats->rx.ofdm_ht; + rx_cck = &stats->rx.cck; + tx = &stats->tx; + bt_activity = NULL; + } else { + WARN_ONCE(1, "len %d doesn't match BT (%zu) or normal (%zu)\n", + len, sizeof(struct iwl_bt_notif_statistics), + sizeof(struct iwl_notif_statistics)); + spin_unlock(&priv->statistics.lock); + return 0; + } + + change = common->temperature != priv->statistics.common.temperature || + (*flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK) != + (priv->statistics.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK); + + iwlagn_accumulative_statistics(priv, common, rx_non_phy, rx_ofdm, + rx_ofdm_ht, rx_cck, tx, bt_activity); + + iwlagn_recover_from_statistics(priv, rx_ofdm, rx_ofdm_ht, tx, stamp); + + priv->statistics.flag = *flag; + memcpy(&priv->statistics.common, common, sizeof(*common)); + memcpy(&priv->statistics.rx_non_phy, rx_non_phy, sizeof(*rx_non_phy)); + memcpy(&priv->statistics.rx_ofdm, rx_ofdm, sizeof(*rx_ofdm)); + memcpy(&priv->statistics.rx_ofdm_ht, rx_ofdm_ht, sizeof(*rx_ofdm_ht)); + memcpy(&priv->statistics.rx_cck, rx_cck, sizeof(*rx_cck)); + memcpy(&priv->statistics.tx, tx, sizeof(*tx)); +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (bt_activity) + memcpy(&priv->statistics.bt_activity, bt_activity, + sizeof(*bt_activity)); +#endif + + priv->rx_statistics_jiffies = stamp; + + set_bit(STATUS_STATISTICS, &priv->status); + + /* Reschedule the statistics timer to occur in + * reg_recalib_period seconds to ensure we get a + * thermal update even if the uCode doesn't give + * us one */ + mod_timer(&priv->statistics_periodic, jiffies + + msecs_to_jiffies(reg_recalib_period * 1000)); + + if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && + (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { + iwlagn_rx_calc_noise(priv); + queue_work(priv->workqueue, &priv->run_time_calib_work); + } + if (priv->lib->temperature && change) + priv->lib->temperature(priv); + + spin_unlock(&priv->statistics.lock); + + return 0; +} + +static int iwlagn_rx_reply_statistics(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_notif_statistics *stats = (void *)pkt->data; + + if (le32_to_cpu(stats->flag) & UCODE_STATISTICS_CLEAR_MSK) { +#ifdef CONFIG_IWLWIFI_DEBUGFS + memset(&priv->accum_stats, 0, + sizeof(priv->accum_stats)); + memset(&priv->delta_stats, 0, + sizeof(priv->delta_stats)); + memset(&priv->max_delta_stats, 0, + sizeof(priv->max_delta_stats)); +#endif + IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); + } + iwlagn_rx_statistics(priv, rxb, cmd); + return 0; +} + +/* Handle notification from uCode that card's power state is changing + * due to software, hardware, or critical temperature RFKILL */ +static int iwlagn_rx_card_state_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; + u32 flags = le32_to_cpu(card_state_notif->flags); + unsigned long status = priv->status; + + IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On", + (flags & CT_CARD_DISABLED) ? + "Reached" : "Not reached"); + + if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | + CT_CARD_DISABLED)) { + + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + iwl_write_direct32(priv->trans, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + if (!(flags & RXON_CARD_DISABLED)) { + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + iwl_write_direct32(priv->trans, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + } + if (flags & CT_CARD_DISABLED) + iwl_tt_enter_ct_kill(priv); + } + if (!(flags & CT_CARD_DISABLED)) + iwl_tt_exit_ct_kill(priv); + + if (flags & HW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + + if (!(flags & RXON_CARD_DISABLED)) + iwl_scan_cancel(priv); + + if ((test_bit(STATUS_RF_KILL_HW, &status) != + test_bit(STATUS_RF_KILL_HW, &priv->status))) + wiphy_rfkill_set_hw_state(priv->hw->wiphy, + test_bit(STATUS_RF_KILL_HW, &priv->status)); + else + wake_up(&priv->trans->wait_command_queue); + return 0; +} + +static int iwlagn_rx_missed_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) + +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_missed_beacon_notif *missed_beacon = (void *)pkt->data; + + if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > + priv->missed_beacon_threshold) { + IWL_DEBUG_CALIB(priv, + "missed bcn cnsq %d totl %d rcd %d expctd %d\n", + le32_to_cpu(missed_beacon->consecutive_missed_beacons), + le32_to_cpu(missed_beacon->total_missed_becons), + le32_to_cpu(missed_beacon->num_recvd_beacons), + le32_to_cpu(missed_beacon->num_expected_beacons)); + if (!test_bit(STATUS_SCANNING, &priv->status)) + iwl_init_sensitivity(priv); + } + return 0; +} + +/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). + * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ +static int iwlagn_rx_reply_rx_phy(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + + priv->last_phy_res_valid = true; + memcpy(&priv->last_phy_res, pkt->data, + sizeof(struct iwl_rx_phy_res)); + return 0; +} + +/* + * returns non-zero if packet should be dropped + */ +static int iwlagn_set_decrypted_flag(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + u32 decrypt_res, + struct ieee80211_rx_status *stats) +{ + u16 fc = le16_to_cpu(hdr->frame_control); + + /* + * All contexts have the same setting here due to it being + * a module parameter, so OK to check any context. + */ + if (priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags & + RXON_FILTER_DIS_DECRYPT_MSK) + return 0; + + if (!(fc & IEEE80211_FCTL_PROTECTED)) + return 0; + + IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res); + switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { + case RX_RES_STATUS_SEC_TYPE_TKIP: + /* The uCode has got a bad phase 1 Key, pushes the packet. + * Decryption will be done in SW. */ + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_KEY_TTAK) + break; + + case RX_RES_STATUS_SEC_TYPE_WEP: + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_ICV_MIC) { + /* bad ICV, the packet is destroyed since the + * decryption is inplace, drop it */ + IWL_DEBUG_RX(priv, "Packet destroyed\n"); + return -1; + } + case RX_RES_STATUS_SEC_TYPE_CCMP: + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_DECRYPT_OK) { + IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n"); + stats->flag |= RX_FLAG_DECRYPTED; + } + break; + + default: + break; + } + return 0; +} + +static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + u16 len, + u32 ampdu_status, + struct iwl_rx_cmd_buffer *rxb, + struct ieee80211_rx_status *stats) +{ + struct sk_buff *skb; + __le16 fc = hdr->frame_control; + struct iwl_rxon_context *ctx; + unsigned int hdrlen, fraglen; + + /* We only process data packets if the interface is open */ + if (unlikely(!priv->is_open)) { + IWL_DEBUG_DROP_LIMIT(priv, + "Dropping packet while interface is not open.\n"); + return; + } + + /* In case of HW accelerated crypto and bad decryption, drop */ + if (!iwlwifi_mod_params.sw_crypto && + iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats)) + return; + + /* Dont use dev_alloc_skb(), we'll have enough headroom once + * ieee80211_hdr pulled. + */ + skb = alloc_skb(128, GFP_ATOMIC); + if (!skb) { + IWL_ERR(priv, "alloc_skb failed\n"); + return; + } + /* If frame is small enough to fit in skb->head, pull it completely. + * If not, only pull ieee80211_hdr so that splice() or TCP coalesce + * are more efficient. + */ + hdrlen = (len <= skb_tailroom(skb)) ? len : sizeof(*hdr); + + memcpy(skb_put(skb, hdrlen), hdr, hdrlen); + fraglen = len - hdrlen; + + if (fraglen) { + int offset = (void *)hdr + hdrlen - + rxb_addr(rxb) + rxb_offset(rxb); + + skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset, + fraglen, rxb->truesize); + } + + /* + * Wake any queues that were stopped due to a passive channel tx + * failure. This can happen because the regulatory enforcement in + * the device waits for a beacon before allowing transmission, + * sometimes even after already having transmitted frames for the + * association because the new RXON may reset the information. + */ + if (unlikely(ieee80211_is_beacon(fc) && priv->passive_no_rx)) { + for_each_context(priv, ctx) { + if (!ether_addr_equal(hdr->addr3, + ctx->active.bssid_addr)) + continue; + iwlagn_lift_passive_no_rx(priv); + } + } + + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(priv->hw, skb); +} + +static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) +{ + u32 decrypt_out = 0; + + if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == + RX_RES_STATUS_STATION_FOUND) + decrypt_out |= (RX_RES_STATUS_STATION_FOUND | + RX_RES_STATUS_NO_STATION_INFO_MISMATCH); + + decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); + + /* packet was not encrypted */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_NONE) + return decrypt_out; + + /* packet was encrypted with unknown alg */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_ERR) + return decrypt_out; + + /* decryption was not done in HW */ + if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != + RX_MPDU_RES_STATUS_DEC_DONE_MSK) + return decrypt_out; + + switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { + + case RX_RES_STATUS_SEC_TYPE_CCMP: + /* alg is CCM: check MIC only */ + if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) + /* Bad MIC */ + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + + break; + + case RX_RES_STATUS_SEC_TYPE_TKIP: + if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { + /* Bad TTAK */ + decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; + break; + } + /* fall through if TTAK OK */ + default: + if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + break; + } + + IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", + decrypt_in, decrypt_out); + + return decrypt_out; +} + +/* Calc max signal level (dBm) among 3 possible receivers */ +static int iwlagn_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host + */ + struct iwlagn_non_cfg_phy *ncphy = + (struct iwlagn_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 val, rssi_a, rssi_b, rssi_c, max_rssi; + u8 agc; + + val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_AGC_IDX]); + agc = (val & IWLAGN_OFDM_AGC_MSK) >> IWLAGN_OFDM_AGC_BIT_POS; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. + */ + val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_AB_IDX]); + rssi_a = (val & IWLAGN_OFDM_RSSI_INBAND_A_BITMSK) >> + IWLAGN_OFDM_RSSI_A_BIT_POS; + rssi_b = (val & IWLAGN_OFDM_RSSI_INBAND_B_BITMSK) >> + IWLAGN_OFDM_RSSI_B_BIT_POS; + val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_C_IDX]); + rssi_c = (val & IWLAGN_OFDM_RSSI_INBAND_C_BITMSK) >> + IWLAGN_OFDM_RSSI_C_BIT_POS; + + max_rssi = max_t(u32, rssi_a, rssi_b); + max_rssi = max_t(u32, max_rssi, rssi_c); + + IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", + rssi_a, rssi_b, rssi_c, max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWLAGN_RSSI_OFFSET; +} + +/* Called for REPLY_RX_MPDU_CMD */ +static int iwlagn_rx_reply_rx(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_rx_phy_res *phy_res; + __le32 rx_pkt_status; + struct iwl_rx_mpdu_res_start *amsdu; + u32 len; + u32 ampdu_status; + u32 rate_n_flags; + + if (!priv->last_phy_res_valid) { + IWL_ERR(priv, "MPDU frame without cached PHY data\n"); + return 0; + } + phy_res = &priv->last_phy_res; + amsdu = (struct iwl_rx_mpdu_res_start *)pkt->data; + header = (struct ieee80211_hdr *)(pkt->data + sizeof(*amsdu)); + len = le16_to_cpu(amsdu->byte_count); + rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*amsdu) + len); + ampdu_status = iwlagn_translate_rx_status(priv, + le32_to_cpu(rx_pkt_status)); + + if ((unlikely(phy_res->cfg_phy_cnt > 20))) { + IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d\n", + phy_res->cfg_phy_cnt); + return 0; + } + + if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || + !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", + le32_to_cpu(rx_pkt_status)); + return 0; + } + + /* This will be used in several places later */ + rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); + + /* rx_status carries information about the packet to mac80211 */ + rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), + rx_status.band); + rx_status.rate_idx = + iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); + rx_status.flag = 0; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ + + priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); + + /* Find max signal strength (dBm) among 3 antenna/receiver chains */ + rx_status.signal = iwlagn_calc_rssi(priv, phy_res); + + IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", + rx_status.signal, (unsigned long long)rx_status.mactime); + + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bit field. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favor of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = + (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) + >> RX_RES_PHY_FLAGS_ANTENNA_POS; + + /* set the preamble flag if appropriate */ + if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + + /* Set up the HT phy flags */ + if (rate_n_flags & RATE_MCS_HT_MSK) + rx_status.flag |= RX_FLAG_HT; + if (rate_n_flags & RATE_MCS_HT40_MSK) + rx_status.flag |= RX_FLAG_40MHZ; + if (rate_n_flags & RATE_MCS_SGI_MSK) + rx_status.flag |= RX_FLAG_SHORT_GI; + if (rate_n_flags & RATE_MCS_GF_MSK) + rx_status.flag |= RX_FLAG_HT_GF; + + iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status, + rxb, &rx_status); + return 0; +} + +static int iwlagn_rx_noa_notification(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_wipan_noa_data *new_data, *old_data; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_wipan_noa_notification *noa_notif = (void *)pkt->data; + + /* no condition -- we're in softirq */ + old_data = rcu_dereference_protected(priv->noa_data, true); + + if (noa_notif->noa_active) { + u32 len = le16_to_cpu(noa_notif->noa_attribute.length); + u32 copylen = len; + + /* EID, len, OUI, subtype */ + len += 1 + 1 + 3 + 1; + /* P2P id, P2P length */ + len += 1 + 2; + copylen += 1 + 2; + + new_data = kmalloc(sizeof(*new_data) + len, GFP_ATOMIC); + if (new_data) { + new_data->length = len; + new_data->data[0] = WLAN_EID_VENDOR_SPECIFIC; + new_data->data[1] = len - 2; /* not counting EID, len */ + new_data->data[2] = (WLAN_OUI_WFA >> 16) & 0xff; + new_data->data[3] = (WLAN_OUI_WFA >> 8) & 0xff; + new_data->data[4] = (WLAN_OUI_WFA >> 0) & 0xff; + new_data->data[5] = WLAN_OUI_TYPE_WFA_P2P; + memcpy(&new_data->data[6], &noa_notif->noa_attribute, + copylen); + } + } else + new_data = NULL; + + rcu_assign_pointer(priv->noa_data, new_data); + + if (old_data) + kfree_rcu(old_data, rcu_head); + + return 0; +} + +/** + * iwl_setup_rx_handlers - Initialize Rx handler callbacks + * + * Setup the RX handlers for each of the reply types sent from the uCode + * to the host. + */ +void iwl_setup_rx_handlers(struct iwl_priv *priv) +{ + int (**handlers)(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + + handlers = priv->rx_handlers; + + handlers[REPLY_ERROR] = iwlagn_rx_reply_error; + handlers[CHANNEL_SWITCH_NOTIFICATION] = iwlagn_rx_csa; + handlers[SPECTRUM_MEASURE_NOTIFICATION] = + iwlagn_rx_spectrum_measure_notif; + handlers[PM_SLEEP_NOTIFICATION] = iwlagn_rx_pm_sleep_notif; + handlers[PM_DEBUG_STATISTIC_NOTIFIC] = + iwlagn_rx_pm_debug_statistics_notif; + handlers[BEACON_NOTIFICATION] = iwlagn_rx_beacon_notif; + handlers[REPLY_ADD_STA] = iwl_add_sta_callback; + + handlers[REPLY_WIPAN_NOA_NOTIFICATION] = iwlagn_rx_noa_notification; + + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. + */ + handlers[REPLY_STATISTICS_CMD] = iwlagn_rx_reply_statistics; + handlers[STATISTICS_NOTIFICATION] = iwlagn_rx_statistics; + + iwl_setup_rx_scan_handlers(priv); + + handlers[CARD_STATE_NOTIFICATION] = iwlagn_rx_card_state_notif; + handlers[MISSED_BEACONS_NOTIFICATION] = + iwlagn_rx_missed_beacon_notif; + + /* Rx handlers */ + handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy; + handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx; + + /* block ack */ + handlers[REPLY_COMPRESSED_BA] = + iwlagn_rx_reply_compressed_ba; + + priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx; + + /* set up notification wait support */ + iwl_notification_wait_init(&priv->notif_wait); + + /* Set up BT Rx handlers */ + if (priv->cfg->bt_params) + iwlagn_bt_rx_handler_setup(priv); +} + +int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + int err = 0; + + /* + * Do the notification wait before RX handlers so + * even if the RX handler consumes the RXB we have + * access to it in the notification wait entry. + */ + iwl_notification_wait_notify(&priv->notif_wait, pkt); + +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + /* + * RX data may be forwarded to userspace in one + * of two cases: the user owns the fw through testmode or when + * the user requested to monitor the rx w/o affecting the regular flow. + * In these cases the iwl_test object will handle forwarding the rx + * data to user space. + * Note that if the ownership flag != IWL_OWNERSHIP_TM the flow + * continues. + */ + iwl_test_rx(&priv->tst, rxb); +#endif + + if (priv->ucode_owner != IWL_OWNERSHIP_TM) { + /* Based on type of command response or notification, + * handle those that need handling via function in + * rx_handlers table. See iwl_setup_rx_handlers() */ + if (priv->rx_handlers[pkt->hdr.cmd]) { + priv->rx_handlers_stats[pkt->hdr.cmd]++; + err = priv->rx_handlers[pkt->hdr.cmd] (priv, rxb, cmd); + } else { + /* No handling needed */ + IWL_DEBUG_RX(priv, "No handler needed for %s, 0x%02x\n", + iwl_dvm_get_cmd_string(pkt->hdr.cmd), + pkt->hdr.cmd); + } + } + return err; +} diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c new file mode 100644 index 00000000000..10896393e5a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -0,0 +1,1577 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/etherdevice.h> +#include "iwl-trans.h" +#include "iwl-modparams.h" +#include "dev.h" +#include "agn.h" +#include "calib.h" + +/* + * initialize rxon structure with default values from eeprom + */ +void iwl_connection_init_rx_config(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + memset(&ctx->staging, 0, sizeof(ctx->staging)); + + if (!ctx->vif) { + ctx->staging.dev_type = ctx->unused_devtype; + } else + switch (ctx->vif->type) { + case NL80211_IFTYPE_AP: + ctx->staging.dev_type = ctx->ap_devtype; + break; + + case NL80211_IFTYPE_STATION: + ctx->staging.dev_type = ctx->station_devtype; + ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case NL80211_IFTYPE_ADHOC: + ctx->staging.dev_type = ctx->ibss_devtype; + ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; + ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | + RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case NL80211_IFTYPE_MONITOR: + ctx->staging.dev_type = RXON_DEV_TYPE_SNIFFER; + break; + + default: + IWL_ERR(priv, "Unsupported interface type %d\n", + ctx->vif->type); + break; + } + +#if 0 + /* TODO: Figure out when short_preamble would be set and cache from + * that */ + if (!hw_to_local(priv->hw)->short_preamble) + ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; +#endif + + ctx->staging.channel = cpu_to_le16(priv->hw->conf.channel->hw_value); + priv->band = priv->hw->conf.channel->band; + + iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif); + + /* clear both MIX and PURE40 mode flag */ + ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | + RXON_FLG_CHANNEL_MODE_PURE_40); + if (ctx->vif) + memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN); + + ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff; + ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff; + ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff; +} + +static int iwlagn_disable_bss(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct iwl_rxon_cmd *send) +{ + __le32 old_filter = send->filter_flags; + int ret; + + send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, + CMD_SYNC, sizeof(*send), send); + + send->filter_flags = old_filter; + + if (ret) + IWL_DEBUG_QUIET_RFKILL(priv, + "Error clearing ASSOC_MSK on BSS (%d)\n", ret); + + return ret; +} + +static int iwlagn_disable_pan(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct iwl_rxon_cmd *send) +{ + struct iwl_notification_wait disable_wait; + __le32 old_filter = send->filter_flags; + u8 old_dev_type = send->dev_type; + int ret; + static const u8 deactivate_cmd[] = { + REPLY_WIPAN_DEACTIVATION_COMPLETE + }; + + iwl_init_notification_wait(&priv->notif_wait, &disable_wait, + deactivate_cmd, ARRAY_SIZE(deactivate_cmd), + NULL, NULL); + + send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + send->dev_type = RXON_DEV_TYPE_P2P; + ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, + CMD_SYNC, sizeof(*send), send); + + send->filter_flags = old_filter; + send->dev_type = old_dev_type; + + if (ret) { + IWL_ERR(priv, "Error disabling PAN (%d)\n", ret); + iwl_remove_notification(&priv->notif_wait, &disable_wait); + } else { + ret = iwl_wait_notification(&priv->notif_wait, + &disable_wait, HZ); + if (ret) + IWL_ERR(priv, "Timed out waiting for PAN disable\n"); + } + + return ret; +} + +static int iwlagn_disconn_pan(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct iwl_rxon_cmd *send) +{ + __le32 old_filter = send->filter_flags; + int ret; + + send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC, + sizeof(*send), send); + + send->filter_flags = old_filter; + + return ret; +} + +static void iwlagn_update_qos(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret; + + if (!ctx->is_active) + return; + + ctx->qos_data.def_qos_parm.qos_flags = 0; + + if (ctx->qos_data.qos_active) + ctx->qos_data.def_qos_parm.qos_flags |= + QOS_PARAM_FLG_UPDATE_EDCA_MSK; + + if (ctx->ht.enabled) + ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; + + IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", + ctx->qos_data.qos_active, + ctx->qos_data.def_qos_parm.qos_flags); + + ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, CMD_SYNC, + sizeof(struct iwl_qosparam_cmd), + &ctx->qos_data.def_qos_parm); + if (ret) + IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n"); +} + +static int iwlagn_update_beacon(struct iwl_priv *priv, + struct ieee80211_vif *vif) +{ + lockdep_assert_held(&priv->mutex); + + dev_kfree_skb(priv->beacon_skb); + priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif); + if (!priv->beacon_skb) + return -ENOMEM; + return iwlagn_send_beacon_cmd(priv); +} + +static int iwlagn_send_rxon_assoc(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret = 0; + struct iwl_rxon_assoc_cmd rxon_assoc; + const struct iwl_rxon_cmd *rxon1 = &ctx->staging; + const struct iwl_rxon_cmd *rxon2 = &ctx->active; + + if ((rxon1->flags == rxon2->flags) && + (rxon1->filter_flags == rxon2->filter_flags) && + (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && + (rxon1->ofdm_ht_single_stream_basic_rates == + rxon2->ofdm_ht_single_stream_basic_rates) && + (rxon1->ofdm_ht_dual_stream_basic_rates == + rxon2->ofdm_ht_dual_stream_basic_rates) && + (rxon1->ofdm_ht_triple_stream_basic_rates == + rxon2->ofdm_ht_triple_stream_basic_rates) && + (rxon1->acquisition_data == rxon2->acquisition_data) && + (rxon1->rx_chain == rxon2->rx_chain) && + (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { + IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = ctx->staging.flags; + rxon_assoc.filter_flags = ctx->staging.filter_flags; + rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; + rxon_assoc.reserved1 = 0; + rxon_assoc.reserved2 = 0; + rxon_assoc.reserved3 = 0; + rxon_assoc.ofdm_ht_single_stream_basic_rates = + ctx->staging.ofdm_ht_single_stream_basic_rates; + rxon_assoc.ofdm_ht_dual_stream_basic_rates = + ctx->staging.ofdm_ht_dual_stream_basic_rates; + rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; + rxon_assoc.ofdm_ht_triple_stream_basic_rates = + ctx->staging.ofdm_ht_triple_stream_basic_rates; + rxon_assoc.acquisition_data = ctx->staging.acquisition_data; + + ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd, + CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc); + return ret; +} + +static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) +{ + u16 new_val; + u16 beacon_factor; + + /* + * If mac80211 hasn't given us a beacon interval, program + * the default into the device (not checking this here + * would cause the adjustment below to return the maximum + * value, which may break PAN.) + */ + if (!beacon_val) + return DEFAULT_BEACON_INTERVAL; + + /* + * If the beacon interval we obtained from the peer + * is too large, we'll have to wake up more often + * (and in IBSS case, we'll beacon too much) + * + * For example, if max_beacon_val is 4096, and the + * requested beacon interval is 7000, we'll have to + * use 3500 to be able to wake up on the beacons. + * + * This could badly influence beacon detection stats. + */ + + beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; + new_val = beacon_val / beacon_factor; + + if (!new_val) + new_val = max_beacon_val; + + return new_val; +} + +static int iwl_send_rxon_timing(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + u64 tsf; + s32 interval_tm, rem; + struct ieee80211_conf *conf = NULL; + u16 beacon_int; + struct ieee80211_vif *vif = ctx->vif; + + conf = &priv->hw->conf; + + lockdep_assert_held(&priv->mutex); + + memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd)); + + ctx->timing.timestamp = cpu_to_le64(priv->timestamp); + ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval); + + beacon_int = vif ? vif->bss_conf.beacon_int : 0; + + /* + * TODO: For IBSS we need to get atim_window from mac80211, + * for now just always use 0 + */ + ctx->timing.atim_window = 0; + + if (ctx->ctxid == IWL_RXON_CTX_PAN && + (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) && + iwl_is_associated(priv, IWL_RXON_CTX_BSS) && + priv->contexts[IWL_RXON_CTX_BSS].vif && + priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) { + ctx->timing.beacon_interval = + priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval; + beacon_int = le16_to_cpu(ctx->timing.beacon_interval); + } else if (ctx->ctxid == IWL_RXON_CTX_BSS && + iwl_is_associated(priv, IWL_RXON_CTX_PAN) && + priv->contexts[IWL_RXON_CTX_PAN].vif && + priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int && + (!iwl_is_associated_ctx(ctx) || !ctx->vif || + !ctx->vif->bss_conf.beacon_int)) { + ctx->timing.beacon_interval = + priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval; + beacon_int = le16_to_cpu(ctx->timing.beacon_interval); + } else { + beacon_int = iwl_adjust_beacon_interval(beacon_int, + IWL_MAX_UCODE_BEACON_INTERVAL * TIME_UNIT); + ctx->timing.beacon_interval = cpu_to_le16(beacon_int); + } + + ctx->beacon_int = beacon_int; + + tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ + interval_tm = beacon_int * TIME_UNIT; + rem = do_div(tsf, interval_tm); + ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem); + + ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1; + + IWL_DEBUG_ASSOC(priv, + "beacon interval %d beacon timer %d beacon tim %d\n", + le16_to_cpu(ctx->timing.beacon_interval), + le32_to_cpu(ctx->timing.beacon_init_val), + le16_to_cpu(ctx->timing.atim_window)); + + return iwl_dvm_send_cmd_pdu(priv, ctx->rxon_timing_cmd, + CMD_SYNC, sizeof(ctx->timing), &ctx->timing); +} + +static int iwlagn_rxon_disconn(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret; + struct iwl_rxon_cmd *active = (void *)&ctx->active; + + if (ctx->ctxid == IWL_RXON_CTX_BSS) { + ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); + } else { + ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); + if (ret) + return ret; + if (ctx->vif) { + ret = iwl_send_rxon_timing(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); + return ret; + } + ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging); + } + } + if (ret) + return ret; + + /* + * Un-assoc RXON clears the station table and WEP + * keys, so we have to restore those afterwards. + */ + iwl_clear_ucode_stations(priv, ctx); + /* update -- might need P2P now */ + iwl_update_bcast_station(priv, ctx); + iwl_restore_stations(priv, ctx); + ret = iwl_restore_default_wep_keys(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); + return ret; + } + + memcpy(active, &ctx->staging, sizeof(*active)); + return 0; +} + +static int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) +{ + int ret; + s8 prev_tx_power; + bool defer; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (priv->calib_disabled & IWL_TX_POWER_CALIB_DISABLED) + return 0; + + lockdep_assert_held(&priv->mutex); + + if (priv->tx_power_user_lmt == tx_power && !force) + return 0; + + if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) { + IWL_WARN(priv, + "Requested user TXPOWER %d below lower limit %d.\n", + tx_power, + IWLAGN_TX_POWER_TARGET_POWER_MIN); + return -EINVAL; + } + + if (tx_power > DIV_ROUND_UP(priv->eeprom_data->max_tx_pwr_half_dbm, 2)) { + IWL_WARN(priv, + "Requested user TXPOWER %d above upper limit %d.\n", + tx_power, priv->eeprom_data->max_tx_pwr_half_dbm); + return -EINVAL; + } + + if (!iwl_is_ready_rf(priv)) + return -EIO; + + /* scan complete and commit_rxon use tx_power_next value, + * it always need to be updated for newest request */ + priv->tx_power_next = tx_power; + + /* do not set tx power when scanning or channel changing */ + defer = test_bit(STATUS_SCANNING, &priv->status) || + memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)); + if (defer && !force) { + IWL_DEBUG_INFO(priv, "Deferring tx power set\n"); + return 0; + } + + prev_tx_power = priv->tx_power_user_lmt; + priv->tx_power_user_lmt = tx_power; + + ret = iwlagn_send_tx_power(priv); + + /* if fail to set tx_power, restore the orig. tx power */ + if (ret) { + priv->tx_power_user_lmt = prev_tx_power; + priv->tx_power_next = prev_tx_power; + } + return ret; +} + +static int iwlagn_rxon_connect(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret; + struct iwl_rxon_cmd *active = (void *)&ctx->active; + + /* RXON timing must be before associated RXON */ + if (ctx->ctxid == IWL_RXON_CTX_BSS) { + ret = iwl_send_rxon_timing(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); + return ret; + } + } + /* QoS info may be cleared by previous un-assoc RXON */ + iwlagn_update_qos(priv, ctx); + + /* + * We'll run into this code path when beaconing is + * enabled, but then we also need to send the beacon + * to the device. + */ + if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { + ret = iwlagn_update_beacon(priv, ctx->vif); + if (ret) { + IWL_ERR(priv, + "Error sending required beacon (%d)!\n", + ret); + return ret; + } + } + + priv->start_calib = 0; + /* + * Apply the new configuration. + * + * Associated RXON doesn't clear the station table in uCode, + * so we don't need to restore stations etc. after this. + */ + ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC, + sizeof(struct iwl_rxon_cmd), &ctx->staging); + if (ret) { + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active, &ctx->staging, sizeof(*active)); + + /* IBSS beacon needs to be sent after setting assoc */ + if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) + if (iwlagn_update_beacon(priv, ctx->vif)) + IWL_ERR(priv, "Error sending IBSS beacon\n"); + iwl_init_sensitivity(priv); + + /* + * If we issue a new RXON command which required a tune then + * we must send a new TXPOWER command or we won't be able to + * Tx any frames. + * + * It's expected we set power here if channel is changing. + */ + ret = iwl_set_tx_power(priv, priv->tx_power_next, true); + if (ret) { + IWL_ERR(priv, "Error sending TX power (%d)\n", ret); + return ret; + } + + if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && + priv->cfg->ht_params && priv->cfg->ht_params->smps_mode) + ieee80211_request_smps(ctx->vif, + priv->cfg->ht_params->smps_mode); + + return 0; +} + +int iwlagn_set_pan_params(struct iwl_priv *priv) +{ + struct iwl_wipan_params_cmd cmd; + struct iwl_rxon_context *ctx_bss, *ctx_pan; + int slot0 = 300, slot1 = 0; + int ret; + + if (priv->valid_contexts == BIT(IWL_RXON_CTX_BSS)) + return 0; + + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); + + lockdep_assert_held(&priv->mutex); + + ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS]; + ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN]; + + /* + * If the PAN context is inactive, then we don't need + * to update the PAN parameters, the last thing we'll + * have done before it goes inactive is making the PAN + * parameters be WLAN-only. + */ + if (!ctx_pan->is_active) + return 0; + + memset(&cmd, 0, sizeof(cmd)); + + /* only 2 slots are currently allowed */ + cmd.num_slots = 2; + + cmd.slots[0].type = 0; /* BSS */ + cmd.slots[1].type = 1; /* PAN */ + + if (priv->hw_roc_setup) { + /* both contexts must be used for this to happen */ + slot1 = IWL_MIN_SLOT_TIME; + slot0 = 3000; + } else if (ctx_bss->vif && ctx_pan->vif) { + int bcnint = ctx_pan->beacon_int; + int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1; + + /* should be set, but seems unused?? */ + cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE); + + if (ctx_pan->vif->type == NL80211_IFTYPE_AP && + bcnint && + bcnint != ctx_bss->beacon_int) { + IWL_ERR(priv, + "beacon intervals don't match (%d, %d)\n", + ctx_bss->beacon_int, ctx_pan->beacon_int); + } else + bcnint = max_t(int, bcnint, + ctx_bss->beacon_int); + if (!bcnint) + bcnint = DEFAULT_BEACON_INTERVAL; + slot0 = bcnint / 2; + slot1 = bcnint - slot0; + + if (test_bit(STATUS_SCAN_HW, &priv->status) || + (!ctx_bss->vif->bss_conf.idle && + !ctx_bss->vif->bss_conf.assoc)) { + slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; + slot1 = IWL_MIN_SLOT_TIME; + } else if (!ctx_pan->vif->bss_conf.idle && + !ctx_pan->vif->bss_conf.assoc) { + slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; + slot0 = IWL_MIN_SLOT_TIME; + } + } else if (ctx_pan->vif) { + slot0 = 0; + slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) * + ctx_pan->beacon_int; + slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1); + + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME; + slot1 = IWL_MIN_SLOT_TIME; + } + } + + cmd.slots[0].width = cpu_to_le16(slot0); + cmd.slots[1].width = cpu_to_le16(slot1); + + ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, CMD_SYNC, + sizeof(cmd), &cmd); + if (ret) + IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret); + + return ret; +} + +static void _iwl_set_rxon_ht(struct iwl_priv *priv, + struct iwl_ht_config *ht_conf, + struct iwl_rxon_context *ctx) +{ + struct iwl_rxon_cmd *rxon = &ctx->staging; + + if (!ctx->ht.enabled) { + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | + RXON_FLG_HT40_PROT_MSK | + RXON_FLG_HT_PROT_MSK); + return; + } + + /* FIXME: if the definition of ht.protection changed, the "translation" + * will be needed for rxon->flags + */ + rxon->flags |= cpu_to_le32(ctx->ht.protection << + RXON_FLG_HT_OPERATING_MODE_POS); + + /* Set up channel bandwidth: + * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ + /* clear the HT channel mode before set the mode */ + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); + if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) { + /* pure ht40 */ + if (ctx->ht.protection == + IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { + rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; + /* + * Note: control channel is opposite of extension + * channel + */ + switch (ctx->ht.extension_chan_offset) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + rxon->flags &= + ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + rxon->flags |= + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + } + } else { + /* + * Note: control channel is opposite of extension + * channel + */ + switch (ctx->ht.extension_chan_offset) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + rxon->flags &= + ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); + rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; + break; + case IEEE80211_HT_PARAM_CHA_SEC_NONE: + default: + /* + * channel location only valid if in Mixed + * mode + */ + IWL_ERR(priv, + "invalid extension channel offset\n"); + break; + } + } + } else { + rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; + } + + iwlagn_set_rxon_chain(priv, ctx); + + IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X " + "extension channel offset 0x%x\n", + le32_to_cpu(rxon->flags), ctx->ht.protection, + ctx->ht.extension_chan_offset); +} + +void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) +{ + struct iwl_rxon_context *ctx; + + for_each_context(priv, ctx) + _iwl_set_rxon_ht(priv, ht_conf, ctx); +} + +/** + * iwl_set_rxon_channel - Set the band and channel values in staging RXON + * @ch: requested channel as a pointer to struct ieee80211_channel + + * NOTE: Does not commit to the hardware; it sets appropriate bit fields + * in the staging RXON flag structure based on the ch->band + */ +void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, + struct iwl_rxon_context *ctx) +{ + enum ieee80211_band band = ch->band; + u16 channel = ch->hw_value; + + if ((le16_to_cpu(ctx->staging.channel) == channel) && + (priv->band == band)) + return; + + ctx->staging.channel = cpu_to_le16(channel); + if (band == IEEE80211_BAND_5GHZ) + ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK; + else + ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; + + priv->band = band; + + IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); + +} + +void iwl_set_flags_for_band(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + enum ieee80211_band band, + struct ieee80211_vif *vif) +{ + if (band == IEEE80211_BAND_5GHZ) { + ctx->staging.flags &= + ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK + | RXON_FLG_CCK_MSK); + ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + } else { + /* Copied from iwl_post_associate() */ + if (vif && vif->bss_conf.use_short_slot) + ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; + ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK; + ctx->staging.flags &= ~RXON_FLG_CCK_MSK; + } +} + +static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, int hw_decrypt) +{ + struct iwl_rxon_cmd *rxon = &ctx->staging; + + if (hw_decrypt) + rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; + else + rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; + +} + +/* validate RXON structure is valid */ +static int iwl_check_rxon_cmd(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + struct iwl_rxon_cmd *rxon = &ctx->staging; + u32 errors = 0; + + if (rxon->flags & RXON_FLG_BAND_24G_MSK) { + if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { + IWL_WARN(priv, "check 2.4G: wrong narrow\n"); + errors |= BIT(0); + } + if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { + IWL_WARN(priv, "check 2.4G: wrong radar\n"); + errors |= BIT(1); + } + } else { + if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { + IWL_WARN(priv, "check 5.2G: not short slot!\n"); + errors |= BIT(2); + } + if (rxon->flags & RXON_FLG_CCK_MSK) { + IWL_WARN(priv, "check 5.2G: CCK!\n"); + errors |= BIT(3); + } + } + if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { + IWL_WARN(priv, "mac/bssid mcast!\n"); + errors |= BIT(4); + } + + /* make sure basic rates 6Mbps and 1Mbps are supported */ + if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 && + (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) { + IWL_WARN(priv, "neither 1 nor 6 are basic\n"); + errors |= BIT(5); + } + + if (le16_to_cpu(rxon->assoc_id) > 2007) { + IWL_WARN(priv, "aid > 2007\n"); + errors |= BIT(6); + } + + if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { + IWL_WARN(priv, "CCK and short slot\n"); + errors |= BIT(7); + } + + if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { + IWL_WARN(priv, "CCK and auto detect"); + errors |= BIT(8); + } + + if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | + RXON_FLG_TGG_PROTECT_MSK)) == + RXON_FLG_TGG_PROTECT_MSK) { + IWL_WARN(priv, "TGg but no auto-detect\n"); + errors |= BIT(9); + } + + if (rxon->channel == 0) { + IWL_WARN(priv, "zero channel is invalid\n"); + errors |= BIT(10); + } + + WARN(errors, "Invalid RXON (%#x), channel %d", + errors, le16_to_cpu(rxon->channel)); + + return errors ? -EINVAL : 0; +} + +/** + * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * @priv: staging_rxon is compared to active_rxon + * + * If the RXON structure is changing enough to require a new tune, + * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that + * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. + */ +static int iwl_full_rxon_required(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + const struct iwl_rxon_cmd *staging = &ctx->staging; + const struct iwl_rxon_cmd *active = &ctx->active; + +#define CHK(cond) \ + if ((cond)) { \ + IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \ + return 1; \ + } + +#define CHK_NEQ(c1, c2) \ + if ((c1) != (c2)) { \ + IWL_DEBUG_INFO(priv, "need full RXON - " \ + #c1 " != " #c2 " - %d != %d\n", \ + (c1), (c2)); \ + return 1; \ + } + + /* These items are only settable from the full RXON command */ + CHK(!iwl_is_associated_ctx(ctx)); + CHK(!ether_addr_equal(staging->bssid_addr, active->bssid_addr)); + CHK(!ether_addr_equal(staging->node_addr, active->node_addr)); + CHK(!ether_addr_equal(staging->wlap_bssid_addr, + active->wlap_bssid_addr)); + CHK_NEQ(staging->dev_type, active->dev_type); + CHK_NEQ(staging->channel, active->channel); + CHK_NEQ(staging->air_propagation, active->air_propagation); + CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates, + active->ofdm_ht_single_stream_basic_rates); + CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates, + active->ofdm_ht_dual_stream_basic_rates); + CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates, + active->ofdm_ht_triple_stream_basic_rates); + CHK_NEQ(staging->assoc_id, active->assoc_id); + + /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can + * be updated with the RXON_ASSOC command -- however only some + * flag transitions are allowed using RXON_ASSOC */ + + /* Check if we are not switching bands */ + CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK, + active->flags & RXON_FLG_BAND_24G_MSK); + + /* Check if we are switching association toggle */ + CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK, + active->filter_flags & RXON_FILTER_ASSOC_MSK); + +#undef CHK +#undef CHK_NEQ + + return 0; +} + +#ifdef CONFIG_IWLWIFI_DEBUG +void iwl_print_rx_config_cmd(struct iwl_priv *priv, + enum iwl_rxon_context_id ctxid) +{ + struct iwl_rxon_context *ctx = &priv->contexts[ctxid]; + struct iwl_rxon_cmd *rxon = &ctx->staging; + + IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); + iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); + IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", + le16_to_cpu(rxon->channel)); + IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", + le32_to_cpu(rxon->flags)); + IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", + le32_to_cpu(rxon->filter_flags)); + IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); + IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", + rxon->ofdm_basic_rates); + IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", + rxon->cck_basic_rates); + IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); + IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); + IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", + le16_to_cpu(rxon->assoc_id)); +} +#endif + +static void iwl_calc_basic_rates(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int lowest_present_ofdm = 100; + int lowest_present_cck = 100; + u8 cck = 0; + u8 ofdm = 0; + + if (ctx->vif) { + struct ieee80211_supported_band *sband; + unsigned long basic = ctx->vif->bss_conf.basic_rates; + int i; + + sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band]; + + for_each_set_bit(i, &basic, BITS_PER_LONG) { + int hw = sband->bitrates[i].hw_value; + if (hw >= IWL_FIRST_OFDM_RATE) { + ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE); + if (lowest_present_ofdm > hw) + lowest_present_ofdm = hw; + } else { + BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0); + + cck |= BIT(hw); + if (lowest_present_cck > hw) + lowest_present_cck = hw; + } + } + } + + /* + * Now we've got the basic rates as bitmaps in the ofdm and cck + * variables. This isn't sufficient though, as there might not + * be all the right rates in the bitmap. E.g. if the only basic + * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps + * and 6 Mbps because the 802.11-2007 standard says in 9.6: + * + * [...] a STA responding to a received frame shall transmit + * its Control Response frame [...] at the highest rate in the + * BSSBasicRateSet parameter that is less than or equal to the + * rate of the immediately previous frame in the frame exchange + * sequence ([...]) and that is of the same modulation class + * ([...]) as the received frame. If no rate contained in the + * BSSBasicRateSet parameter meets these conditions, then the + * control frame sent in response to a received frame shall be + * transmitted at the highest mandatory rate of the PHY that is + * less than or equal to the rate of the received frame, and + * that is of the same modulation class as the received frame. + * + * As a consequence, we need to add all mandatory rates that are + * lower than all of the basic rates to these bitmaps. + */ + + if (IWL_RATE_24M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_24M_MASK >> IWL_FIRST_OFDM_RATE; + if (IWL_RATE_12M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_12M_MASK >> IWL_FIRST_OFDM_RATE; + /* 6M already there or needed so always add */ + ofdm |= IWL_RATE_6M_MASK >> IWL_FIRST_OFDM_RATE; + + /* + * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP. + * Note, however: + * - if no CCK rates are basic, it must be ERP since there must + * be some basic rates at all, so they're OFDM => ERP PHY + * (or we're in 5 GHz, and the cck bitmap will never be used) + * - if 11M is a basic rate, it must be ERP as well, so add 5.5M + * - if 5.5M is basic, 1M and 2M are mandatory + * - if 2M is basic, 1M is mandatory + * - if 1M is basic, that's the only valid ACK rate. + * As a consequence, it's not as complicated as it sounds, just add + * any lower rates to the ACK rate bitmap. + */ + if (IWL_RATE_11M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_5M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_2M_INDEX < lowest_present_ofdm) + ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; + /* 1M already there or needed so always add */ + cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE; + + IWL_DEBUG_RATE(priv, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n", + cck, ofdm); + + /* "basic_rates" is a misnomer here -- should be called ACK rates */ + ctx->staging.cck_basic_rates = cck; + ctx->staging.ofdm_basic_rates = ofdm; +} + +/** + * iwlagn_commit_rxon - commit staging_rxon to hardware + * + * The RXON command in staging_rxon is committed to the hardware and + * the active_rxon structure is updated with the new data. This + * function correctly transitions out of the RXON_ASSOC_MSK state if + * a HW tune is required based on the RXON structure changes. + * + * The connect/disconnect flow should be as the following: + * + * 1. make sure send RXON command with association bit unset if not connect + * this should include the channel and the band for the candidate + * to be connected to + * 2. Add Station before RXON association with the AP + * 3. RXON_timing has to send before RXON for connection + * 4. full RXON command - associated bit set + * 5. use RXON_ASSOC command to update any flags changes + */ +int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + /* cast away the const for active_rxon in this function */ + struct iwl_rxon_cmd *active = (void *)&ctx->active; + bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); + int ret; + + lockdep_assert_held(&priv->mutex); + + if (!iwl_is_alive(priv)) + return -EBUSY; + + /* This function hardcodes a bunch of dual-mode assumptions */ + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); + + if (!ctx->is_active) + return 0; + + /* always get timestamp with Rx frame */ + ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; + + /* recalculate basic rates */ + iwl_calc_basic_rates(priv, ctx); + + /* + * force CTS-to-self frames protection if RTS-CTS is not preferred + * one aggregation protection method + */ + if (!priv->hw_params.use_rts_for_aggregation) + ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; + + if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || + !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) + ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + iwl_print_rx_config_cmd(priv, ctx->ctxid); + ret = iwl_check_rxon_cmd(priv, ctx); + if (ret) { + IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* + * receive commit_rxon request + * abort any previous channel switch if still in process + */ + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { + IWL_DEBUG_11H(priv, "abort channel switch on %d\n", + le16_to_cpu(priv->switch_channel)); + iwl_chswitch_done(priv, false); + } + + /* + * If we don't need to send a full RXON, we can use + * iwl_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. + */ + if (!iwl_full_rxon_required(priv, ctx)) { + ret = iwlagn_send_rxon_assoc(priv, ctx); + if (ret) { + IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); + return ret; + } + + memcpy(active, &ctx->staging, sizeof(*active)); + /* + * We do not commit tx power settings while channel changing, + * do it now if after settings changed. + */ + iwl_set_tx_power(priv, priv->tx_power_next, false); + + /* make sure we are in the right PS state */ + iwl_power_update_mode(priv, true); + + return 0; + } + + iwl_set_rxon_hwcrypto(priv, ctx, !iwlwifi_mod_params.sw_crypto); + + IWL_DEBUG_INFO(priv, + "Going to commit RXON\n" + " * with%s RXON_FILTER_ASSOC_MSK\n" + " * channel = %d\n" + " * bssid = %pM\n", + (new_assoc ? "" : "out"), + le16_to_cpu(ctx->staging.channel), + ctx->staging.bssid_addr); + + /* + * Always clear associated first, but with the correct config. + * This is required as for example station addition for the + * AP station must be done after the BSSID is set to correctly + * set up filters in the device. + */ + ret = iwlagn_rxon_disconn(priv, ctx); + if (ret) + return ret; + + ret = iwlagn_set_pan_params(priv); + if (ret) + return ret; + + if (new_assoc) + return iwlagn_rxon_connect(priv, ctx); + + return 0; +} + +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx) +{ + if (conf_is_ht40_minus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_BELOW; + ctx->ht.is_40mhz = true; + } else if (conf_is_ht40_plus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + ctx->ht.is_40mhz = true; + } else { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_NONE; + ctx->ht.is_40mhz = false; + } +} + +int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_channel *channel = conf->channel; + int ret = 0; + + IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed); + + mutex_lock(&priv->mutex); + + if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { + IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); + goto out; + } + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); + goto out; + } + + if (changed & (IEEE80211_CONF_CHANGE_SMPS | + IEEE80211_CONF_CHANGE_CHANNEL)) { + /* mac80211 uses static for non-HT which is what we want */ + priv->current_ht_config.smps = conf->smps_mode; + + /* + * Recalculate chain counts. + * + * If monitor mode is enabled then mac80211 will + * set up the SM PS mode to OFF if an HT channel is + * configured. + */ + for_each_context(priv, ctx) + iwlagn_set_rxon_chain(priv, ctx); + } + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + for_each_context(priv, ctx) { + /* Configure HT40 channels */ + if (ctx->ht.enabled != conf_is_ht(conf)) + ctx->ht.enabled = conf_is_ht(conf); + + if (ctx->ht.enabled) { + /* if HT40 is used, it should not change + * after associated except channel switch */ + if (!ctx->ht.is_40mhz || + !iwl_is_associated_ctx(ctx)) + iwlagn_config_ht40(conf, ctx); + } else + ctx->ht.is_40mhz = false; + + /* + * Default to no protection. Protection mode will + * later be set from BSS config in iwl_ht_conf + */ + ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; + + /* if we are switching from ht to 2.4 clear flags + * from any ht related info since 2.4 does not + * support ht */ + if (le16_to_cpu(ctx->staging.channel) != + channel->hw_value) + ctx->staging.flags = 0; + + iwl_set_rxon_channel(priv, channel, ctx); + iwl_set_rxon_ht(priv, &priv->current_ht_config); + + iwl_set_flags_for_band(priv, ctx, channel->band, + ctx->vif); + } + + iwl_update_bcast_stations(priv); + } + + if (changed & (IEEE80211_CONF_CHANGE_PS | + IEEE80211_CONF_CHANGE_IDLE)) { + ret = iwl_power_update_mode(priv, false); + if (ret) + IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); + } + + if (changed & IEEE80211_CONF_CHANGE_POWER) { + IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", + priv->tx_power_user_lmt, conf->power_level); + + iwl_set_tx_power(priv, conf->power_level, false); + } + + for_each_context(priv, ctx) { + if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) + continue; + iwlagn_commit_rxon(priv, ctx); + } + out: + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return ret; +} + +static void iwlagn_check_needed_chains(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_vif *vif = ctx->vif; + struct iwl_rxon_context *tmp; + struct ieee80211_sta *sta; + struct iwl_ht_config *ht_conf = &priv->current_ht_config; + struct ieee80211_sta_ht_cap *ht_cap; + bool need_multiple; + + lockdep_assert_held(&priv->mutex); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + rcu_read_lock(); + sta = ieee80211_find_sta(vif, bss_conf->bssid); + if (!sta) { + /* + * If at all, this can only happen through a race + * when the AP disconnects us while we're still + * setting up the connection, in that case mac80211 + * will soon tell us about that. + */ + need_multiple = false; + rcu_read_unlock(); + break; + } + + ht_cap = &sta->ht_cap; + + need_multiple = true; + + /* + * If the peer advertises no support for receiving 2 and 3 + * stream MCS rates, it can't be transmitting them either. + */ + if (ht_cap->mcs.rx_mask[1] == 0 && + ht_cap->mcs.rx_mask[2] == 0) { + need_multiple = false; + } else if (!(ht_cap->mcs.tx_params & + IEEE80211_HT_MCS_TX_DEFINED)) { + /* If it can't TX MCS at all ... */ + need_multiple = false; + } else if (ht_cap->mcs.tx_params & + IEEE80211_HT_MCS_TX_RX_DIFF) { + int maxstreams; + + /* + * But if it can receive them, it might still not + * be able to transmit them, which is what we need + * to check here -- so check the number of streams + * it advertises for TX (if different from RX). + */ + + maxstreams = (ht_cap->mcs.tx_params & + IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK); + maxstreams >>= + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; + maxstreams += 1; + + if (maxstreams <= 1) + need_multiple = false; + } + + rcu_read_unlock(); + break; + case NL80211_IFTYPE_ADHOC: + /* currently */ + need_multiple = false; + break; + default: + /* only AP really */ + need_multiple = true; + break; + } + + ctx->ht_need_multiple_chains = need_multiple; + + if (!need_multiple) { + /* check all contexts */ + for_each_context(priv, tmp) { + if (!tmp->vif) + continue; + if (tmp->ht_need_multiple_chains) { + need_multiple = true; + break; + } + } + } + + ht_conf->single_chain_sufficient = !need_multiple; +} + +static void iwlagn_chain_noise_reset(struct iwl_priv *priv) +{ + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + int ret; + + if (!(priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)) + return; + + if ((data->state == IWL_CHAIN_NOISE_ALIVE) && + iwl_is_any_associated(priv)) { + struct iwl_calib_chain_noise_reset_cmd cmd; + + /* clear data for chain noise calibration algorithm */ + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; + + memset(&cmd, 0, sizeof(cmd)); + iwl_set_calib_hdr(&cmd.hdr, + priv->phy_calib_chain_noise_reset_cmd); + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_PHY_CALIBRATION_CMD, + CMD_SYNC, sizeof(cmd), &cmd); + if (ret) + IWL_ERR(priv, + "Could not send REPLY_PHY_CALIBRATION_CMD\n"); + data->state = IWL_CHAIN_NOISE_ACCUMULATE; + IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); + } +} + +void iwlagn_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + int ret; + bool force = false; + + mutex_lock(&priv->mutex); + + if (unlikely(!iwl_is_ready(priv))) { + IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); + mutex_unlock(&priv->mutex); + return; + } + + if (unlikely(!ctx->vif)) { + IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n"); + mutex_unlock(&priv->mutex); + return; + } + + if (changes & BSS_CHANGED_BEACON_INT) + force = true; + + if (changes & BSS_CHANGED_QOS) { + ctx->qos_data.qos_active = bss_conf->qos; + iwlagn_update_qos(priv, ctx); + } + + ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); + if (vif->bss_conf.use_short_preamble) + ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (changes & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + priv->timestamp = bss_conf->sync_tsf; + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + } else { + /* + * If we disassociate while there are pending + * frames, just wake up the queues and let the + * frames "escape" ... This shouldn't really + * be happening to start with, but we should + * not get stuck in this case either since it + * can happen if userspace gets confused. + */ + iwlagn_lift_passive_no_rx(priv); + + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + if (ctx->ctxid == IWL_RXON_CTX_BSS) + priv->have_rekey_data = false; + } + + iwlagn_bt_coex_rssi_monitor(priv); + } + + if (ctx->ht.enabled) { + ctx->ht.protection = bss_conf->ht_operation_mode & + IEEE80211_HT_OP_MODE_PROTECTION; + ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode & + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + iwlagn_check_needed_chains(priv, ctx, bss_conf); + iwl_set_rxon_ht(priv, &priv->current_ht_config); + } + + iwlagn_set_rxon_chain(priv, ctx); + + if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) + ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; + else + ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; + + if (bss_conf->use_cts_prot) + ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; + else + ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; + + memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); + + if (vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) { + if (vif->bss_conf.enable_beacon) { + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + priv->beacon_ctx = ctx; + } else { + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + priv->beacon_ctx = NULL; + } + } + + /* + * If the ucode decides to do beacon filtering before + * association, it will lose beacons that are needed + * before sending frames out on passive channels. This + * causes association failures on those channels. Enable + * receiving beacons in such cases. + */ + + if (vif->type == NL80211_IFTYPE_STATION) { + if (!bss_conf->assoc) + ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK; + else + ctx->staging.filter_flags &= + ~RXON_FILTER_BCON_AWARE_MSK; + } + + if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) + iwlagn_commit_rxon(priv, ctx); + + if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) { + /* + * The chain noise calibration will enable PM upon + * completion. If calibration has already been run + * then we need to enable power management here. + */ + if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) + iwl_power_update_mode(priv, false); + + /* Enable RX differential gain and sensitivity calibrations */ + iwlagn_chain_noise_reset(priv); + priv->start_calib = 1; + } + + if (changes & BSS_CHANGED_IBSS) { + ret = iwlagn_manage_ibss_station(priv, vif, + bss_conf->ibss_joined); + if (ret) + IWL_ERR(priv, "failed to %s IBSS station %pM\n", + bss_conf->ibss_joined ? "add" : "remove", + bss_conf->bssid); + } + + if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC && + priv->beacon_ctx) { + if (iwlagn_update_beacon(priv, vif)) + IWL_ERR(priv, "Error sending IBSS beacon\n"); + } + + mutex_unlock(&priv->mutex); +} + +void iwlagn_post_scan(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + + /* + * We do not commit power settings while scan is pending, + * do it now if the settings changed. + */ + iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false); + iwl_set_tx_power(priv, priv->tx_power_next, false); + + /* + * Since setting the RXON may have been deferred while + * performing the scan, fire one off if needed + */ + for_each_context(priv, ctx) + if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) + iwlagn_commit_rxon(priv, ctx); + + iwlagn_set_pan_params(priv); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c new file mode 100644 index 00000000000..e3467fa8689 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/scan.c @@ -0,0 +1,1187 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/etherdevice.h> +#include <net/mac80211.h> + +#include "dev.h" +#include "agn.h" + +/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after + * sending probe req. This should be set long enough to hear probe responses + * from more than one AP. */ +#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (20) + +#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) +#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) + +/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. + * Must be set longer than active dwell time. + * For the most reliable scan, set > AP beacon interval (typically 100msec). */ +#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ +#define IWL_PASSIVE_DWELL_TIME_52 (10) +#define IWL_PASSIVE_DWELL_BASE (100) +#define IWL_CHANNEL_TUNE_TIME 5 +#define MAX_SCAN_CHANNEL 50 + +/* For reset radio, need minimal dwell time only */ +#define IWL_RADIO_RESET_DWELL_TIME 5 + +static int iwl_send_scan_abort(struct iwl_priv *priv) +{ + int ret; + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_ABORT_CMD, + .flags = CMD_SYNC | CMD_WANT_SKB, + }; + __le32 *status; + + /* Exit instantly with error when device is not ready + * to receive scan abort command or it does not perform + * hardware scan currently */ + if (!test_bit(STATUS_READY, &priv->status) || + !test_bit(STATUS_SCAN_HW, &priv->status) || + test_bit(STATUS_FW_ERROR, &priv->status)) + return -EIO; + + ret = iwl_dvm_send_cmd(priv, &cmd); + if (ret) + return ret; + + status = (void *)cmd.resp_pkt->data; + if (*status != CAN_ABORT_STATUS) { + /* The scan abort will return 1 for success or + * 2 for "failure". A failure condition can be + * due to simply not being in an active scan which + * can occur if we send the scan abort before we + * the microcode has notified us that a scan is + * completed. */ + IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", + le32_to_cpu(*status)); + ret = -EIO; + } + + iwl_free_resp(&cmd); + return ret; +} + +static void iwl_complete_scan(struct iwl_priv *priv, bool aborted) +{ + /* check if scan was requested from mac80211 */ + if (priv->scan_request) { + IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n"); + ieee80211_scan_completed(priv->hw, aborted); + } + + if (priv->scan_type == IWL_SCAN_ROC) + iwl_scan_roc_expired(priv); + + priv->scan_type = IWL_SCAN_NORMAL; + priv->scan_vif = NULL; + priv->scan_request = NULL; +} + +static void iwl_process_scan_complete(struct iwl_priv *priv) +{ + bool aborted; + + lockdep_assert_held(&priv->mutex); + + if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status)) + return; + + IWL_DEBUG_SCAN(priv, "Completed scan.\n"); + + cancel_delayed_work(&priv->scan_check); + + aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status); + if (aborted) + IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n"); + + if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Scan already completed.\n"); + goto out_settings; + } + + if (priv->scan_type == IWL_SCAN_ROC) + iwl_scan_roc_expired(priv); + + if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) { + int err; + + /* Check if mac80211 requested scan during our internal scan */ + if (priv->scan_request == NULL) + goto out_complete; + + /* If so request a new scan */ + err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL, + priv->scan_request->channels[0]->band); + if (err) { + IWL_DEBUG_SCAN(priv, + "failed to initiate pending scan: %d\n", err); + aborted = true; + goto out_complete; + } + + return; + } + +out_complete: + iwl_complete_scan(priv, aborted); + +out_settings: + /* Can we still talk to firmware ? */ + if (!iwl_is_ready_rf(priv)) + return; + + iwlagn_post_scan(priv); +} + +void iwl_force_scan_end(struct iwl_priv *priv) +{ + lockdep_assert_held(&priv->mutex); + + if (!test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n"); + return; + } + + IWL_DEBUG_SCAN(priv, "Forcing scan end\n"); + clear_bit(STATUS_SCANNING, &priv->status); + clear_bit(STATUS_SCAN_HW, &priv->status); + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + clear_bit(STATUS_SCAN_COMPLETE, &priv->status); + iwl_complete_scan(priv, true); +} + +static void iwl_do_scan_abort(struct iwl_priv *priv) +{ + int ret; + + lockdep_assert_held(&priv->mutex); + + if (!test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n"); + return; + } + + if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Scan abort in progress\n"); + return; + } + + ret = iwl_send_scan_abort(priv); + if (ret) { + IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); + iwl_force_scan_end(priv); + } else + IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); +} + +/** + * iwl_scan_cancel - Cancel any currently executing HW scan + */ +int iwl_scan_cancel(struct iwl_priv *priv) +{ + IWL_DEBUG_SCAN(priv, "Queuing abort scan\n"); + queue_work(priv->workqueue, &priv->abort_scan); + return 0; +} + +/** + * iwl_scan_cancel_timeout - Cancel any currently executing HW scan + * @ms: amount of time to wait (in milliseconds) for scan to abort + * + */ +void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(ms); + + lockdep_assert_held(&priv->mutex); + + IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n"); + + iwl_do_scan_abort(priv); + + while (time_before_eq(jiffies, timeout)) { + if (!test_bit(STATUS_SCAN_HW, &priv->status)) + goto finished; + msleep(20); + } + + return; + + finished: + /* + * Now STATUS_SCAN_HW is clear. This means that the + * device finished, but the background work is going + * to execute at best as soon as we release the mutex. + * Since we need to be able to issue a new scan right + * after this function returns, run the complete here. + * The STATUS_SCAN_COMPLETE bit will then be cleared + * and prevent the background work from "completing" + * a possible new scan. + */ + iwl_process_scan_complete(priv); +} + +/* Service response to REPLY_SCAN_CMD (0x80) */ +static int iwl_rx_reply_scan(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_scanreq_notification *notif = (void *)pkt->data; + + IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status); +#endif + return 0; +} + +/* Service SCAN_START_NOTIFICATION (0x82) */ +static int iwl_rx_scan_start_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_scanstart_notification *notif = (void *)pkt->data; + + priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); + IWL_DEBUG_SCAN(priv, "Scan start: " + "%d [802.11%s] " + "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", + notif->channel, + notif->band ? "bg" : "a", + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + notif->status, notif->beacon_timer); + + if (priv->scan_type == IWL_SCAN_ROC && + !priv->hw_roc_start_notified) { + ieee80211_ready_on_channel(priv->hw); + priv->hw_roc_start_notified = true; + } + + return 0; +} + +/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ +static int iwl_rx_scan_results_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_scanresults_notification *notif = (void *)pkt->data; + + IWL_DEBUG_SCAN(priv, "Scan ch.res: " + "%d [802.11%s] " + "probe status: %u:%u " + "(TSF: 0x%08X:%08X) - %d " + "elapsed=%lu usec\n", + notif->channel, + notif->band ? "bg" : "a", + notif->probe_status, notif->num_probe_not_sent, + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + le32_to_cpu(notif->statistics[0]), + le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf); +#endif + return 0; +} + +/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ +static int iwl_rx_scan_complete_notif(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data; + + IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", + scan_notif->scanned_channels, + scan_notif->tsf_low, + scan_notif->tsf_high, scan_notif->status); + + IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n", + (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", + jiffies_to_msecs(jiffies - priv->scan_start)); + + /* + * When aborting, we run the scan completed background work inline + * and the background work must then do nothing. The SCAN_COMPLETE + * bit helps implement that logic and thus needs to be set before + * queueing the work. Also, since the scan abort waits for SCAN_HW + * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW + * to avoid a race there. + */ + set_bit(STATUS_SCAN_COMPLETE, &priv->status); + clear_bit(STATUS_SCAN_HW, &priv->status); + queue_work(priv->workqueue, &priv->scan_completed); + + if (priv->iw_mode != NL80211_IFTYPE_ADHOC && + iwl_advanced_bt_coexist(priv) && + priv->bt_status != scan_notif->bt_status) { + if (scan_notif->bt_status) { + /* BT on */ + if (!priv->bt_ch_announce) + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_HIGH; + /* + * otherwise, no traffic load information provided + * no changes made + */ + } else { + /* BT off */ + priv->bt_traffic_load = + IWL_BT_COEX_TRAFFIC_LOAD_NONE; + } + priv->bt_status = scan_notif->bt_status; + queue_work(priv->workqueue, + &priv->bt_traffic_change_work); + } + return 0; +} + +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) +{ + /* scan handlers */ + priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; + priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; + priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = + iwl_rx_scan_results_notif; + priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = + iwl_rx_scan_complete_notif; +} + +static u16 iwl_get_active_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band, u8 n_probes) +{ + if (band == IEEE80211_BAND_5GHZ) + return IWL_ACTIVE_DWELL_TIME_52 + + IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); + else + return IWL_ACTIVE_DWELL_TIME_24 + + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); +} + +static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time) +{ + struct iwl_rxon_context *ctx; + int limits[NUM_IWL_RXON_CTX] = {}; + int n_active = 0; + u16 limit; + + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); + + /* + * If we're associated, we clamp the dwell time 98% + * of the beacon interval (minus 2 * channel tune time) + * If both contexts are active, we have to restrict to + * 1/2 of the minimum of them, because they might be in + * lock-step with the time inbetween only half of what + * time we'd have in each of them. + */ + for_each_context(priv, ctx) { + switch (ctx->staging.dev_type) { + case RXON_DEV_TYPE_P2P: + /* no timing constraints */ + continue; + case RXON_DEV_TYPE_ESS: + default: + /* timing constraints if associated */ + if (!iwl_is_associated_ctx(ctx)) + continue; + break; + case RXON_DEV_TYPE_CP: + case RXON_DEV_TYPE_2STA: + /* + * These seem to always have timers for TBTT + * active in uCode even when not associated yet. + */ + break; + } + + limits[n_active++] = ctx->beacon_int ?: IWL_PASSIVE_DWELL_BASE; + } + + switch (n_active) { + case 0: + return dwell_time; + case 2: + limit = (limits[1] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; + limit /= 2; + dwell_time = min(limit, dwell_time); + /* fall through to limit further */ + case 1: + limit = (limits[0] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; + limit /= n_active; + return min(limit, dwell_time); + default: + WARN_ON_ONCE(1); + return dwell_time; + } +} + +static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band) +{ + u16 passive = (band == IEEE80211_BAND_2GHZ) ? + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; + + return iwl_limit_dwell(priv, passive); +} + +/* Return valid, unused, channel for a passive scan to reset the RF */ +static u8 iwl_get_single_channel_number(struct iwl_priv *priv, + enum ieee80211_band band) +{ + struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band]; + struct iwl_rxon_context *ctx; + int i; + + for (i = 0; i < sband->n_channels; i++) { + bool busy = false; + + for_each_context(priv, ctx) { + busy = sband->channels[i].hw_value == + le16_to_cpu(ctx->staging.channel); + if (busy) + break; + } + + if (busy) + continue; + + if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED)) + return sband->channels[i].hw_value; + } + + return 0; +} + +static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + struct iwl_scan_channel *scan_ch) +{ + const struct ieee80211_supported_band *sband; + u16 channel; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) { + IWL_ERR(priv, "invalid band\n"); + return 0; + } + + channel = iwl_get_single_channel_number(priv, band); + if (channel) { + scan_ch->channel = cpu_to_le16(channel); + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + scan_ch->active_dwell = + cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); + scan_ch->passive_dwell = + cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + return 1; + } + + IWL_ERR(priv, "no valid channel found\n"); + return 0; +} + +static int iwl_get_channels_for_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + u8 is_active, u8 n_probes, + struct iwl_scan_channel *scan_ch) +{ + struct ieee80211_channel *chan; + const struct ieee80211_supported_band *sband; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + u16 channel; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) + return 0; + + active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); + passive_dwell = iwl_get_passive_dwell_time(priv, band); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { + chan = priv->scan_request->channels[i]; + + if (chan->band != band) + continue; + + channel = chan->hw_value; + scan_ch->channel = cpu_to_le16(channel); + + if (!is_active || (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + else + scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; + + if (n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + + IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", + channel, le32_to_cpu(scan_ch->type), + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + "ACTIVE" : "PASSIVE", + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + active_dwell : passive_dwell); + + scan_ch++; + added++; + } + + IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); + return added; +} + +/** + * iwl_fill_probe_req - fill in all required fields and IE for probe request + */ + +static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, + const u8 *ies, int ie_len, const u8 *ssid, + u8 ssid_len, int left) +{ + int len = 0; + u8 *pos = NULL; + + /* Make sure there is enough space for the probe request, + * two mandatory IEs and the data */ + left -= 24; + if (left < 0) + return 0; + + frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); + memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); + memcpy(frame->sa, ta, ETH_ALEN); + memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); + frame->seq_ctrl = 0; + + len += 24; + + /* ...next IE... */ + pos = &frame->u.probe_req.variable[0]; + + /* fill in our SSID IE */ + left -= ssid_len + 2; + if (left < 0) + return 0; + *pos++ = WLAN_EID_SSID; + *pos++ = ssid_len; + if (ssid && ssid_len) { + memcpy(pos, ssid, ssid_len); + pos += ssid_len; + } + + len += ssid_len + 2; + + if (WARN_ON(left < ie_len)) + return len; + + if (ies && ie_len) { + memcpy(pos, ies, ie_len); + len += ie_len; + } + + return (u16)len; +} + +static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_CMD, + .len = { sizeof(struct iwl_scan_cmd), }, + .flags = CMD_SYNC, + }; + struct iwl_scan_cmd *scan; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + u32 rate_flags = 0; + u16 cmd_len = 0; + u16 rx_chain = 0; + enum ieee80211_band band; + u8 n_probes = 0; + u8 rx_ant = priv->eeprom_data->valid_rx_ant; + u8 rate; + bool is_active = false; + int chan_mod; + u8 active_chains; + u8 scan_tx_antennas = priv->eeprom_data->valid_tx_ant; + int ret; + int scan_cmd_size = sizeof(struct iwl_scan_cmd) + + MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) + + priv->fw->ucode_capa.max_probe_length; + const u8 *ssid = NULL; + u8 ssid_len = 0; + + if (WARN_ON_ONCE(priv->scan_request && + priv->scan_request->n_channels > MAX_SCAN_CHANNEL)) + return -EINVAL; + + lockdep_assert_held(&priv->mutex); + + if (vif) + ctx = iwl_rxon_ctx_from_vif(vif); + + if (!priv->scan_cmd) { + priv->scan_cmd = kmalloc(scan_cmd_size, GFP_KERNEL); + if (!priv->scan_cmd) { + IWL_DEBUG_SCAN(priv, + "fail to allocate memory for scan\n"); + return -ENOMEM; + } + } + scan = priv->scan_cmd; + memset(scan, 0, scan_cmd_size); + + scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; + scan->quiet_time = IWL_ACTIVE_QUIET_TIME; + + if (priv->scan_type != IWL_SCAN_ROC && + iwl_is_any_associated(priv)) { + u16 interval = 0; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + + IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); + switch (priv->scan_type) { + case IWL_SCAN_ROC: + WARN_ON(1); + break; + case IWL_SCAN_RADIO_RESET: + interval = 0; + break; + case IWL_SCAN_NORMAL: + interval = vif->bss_conf.beacon_int; + break; + } + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + + extra = (suspend_time / interval) << 22; + scan_suspend_time = (extra | + ((suspend_time % interval) * 1024)); + scan->suspend_time = cpu_to_le32(scan_suspend_time); + IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } else if (priv->scan_type == IWL_SCAN_ROC) { + scan->suspend_time = 0; + scan->max_out_time = 0; + scan->quiet_time = 0; + scan->quiet_plcp_th = 0; + } + + switch (priv->scan_type) { + case IWL_SCAN_RADIO_RESET: + IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); + /* + * Override quiet time as firmware checks that active + * dwell is >= quiet; since we use passive scan it'll + * not actually be used. + */ + scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); + break; + case IWL_SCAN_NORMAL: + if (priv->scan_request->n_ssids) { + int i, p = 0; + IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); + /* + * The highest priority SSID is inserted to the + * probe request template. + */ + ssid_len = priv->scan_request->ssids[0].ssid_len; + ssid = priv->scan_request->ssids[0].ssid; + + /* + * Invert the order of ssids, the firmware will invert + * it back. + */ + for (i = priv->scan_request->n_ssids - 1; i >= 1; i--) { + scan->direct_scan[p].id = WLAN_EID_SSID; + scan->direct_scan[p].len = + priv->scan_request->ssids[i].ssid_len; + memcpy(scan->direct_scan[p].ssid, + priv->scan_request->ssids[i].ssid, + priv->scan_request->ssids[i].ssid_len); + n_probes++; + p++; + } + is_active = true; + } else + IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); + break; + case IWL_SCAN_ROC: + IWL_DEBUG_SCAN(priv, "Start ROC scan.\n"); + break; + } + + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = ctx->bcast_sta_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + switch (priv->scan_band) { + case IEEE80211_BAND_2GHZ: + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + chan_mod = le32_to_cpu( + priv->contexts[IWL_RXON_CTX_BSS].active.flags & + RXON_FLG_CHANNEL_MODE_MSK) + >> RXON_FLG_CHANNEL_MODE_POS; + if ((priv->scan_request && priv->scan_request->no_cck) || + chan_mod == CHANNEL_MODE_PURE_40) { + rate = IWL_RATE_6M_PLCP; + } else { + rate = IWL_RATE_1M_PLCP; + rate_flags = RATE_MCS_CCK_MSK; + } + /* + * Internal scans are passive, so we can indiscriminately set + * the BT ignore flag on 2.4 GHz since it applies to TX only. + */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) + scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT; + break; + case IEEE80211_BAND_5GHZ: + rate = IWL_RATE_6M_PLCP; + break; + default: + IWL_WARN(priv, "Invalid scan band\n"); + return -EIO; + } + + /* + * If active scanning is requested but a certain channel is + * marked passive, we can do active scanning if we detect + * transmissions. + * + * There is an issue with some firmware versions that triggers + * a sysassert on a "good CRC threshold" of zero (== disabled), + * on a radar channel even though this means that we should NOT + * send probes. + * + * The "good CRC threshold" is the number of frames that we + * need to receive during our dwell time on a channel before + * sending out probes -- setting this to a huge value will + * mean we never reach it, but at the same time work around + * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER + * here instead of IWL_GOOD_CRC_TH_DISABLED. + * + * This was fixed in later versions along with some other + * scan changes, and the threshold behaves as a flag in those + * versions. + */ + if (priv->new_scan_threshold_behaviour) + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_DISABLED; + else + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_NEVER; + + band = priv->scan_band; + + if (band == IEEE80211_BAND_2GHZ && + priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + /* transmit 2.4 GHz probes only on first antenna */ + scan_tx_antennas = first_antenna(scan_tx_antennas); + } + + priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, + priv->scan_tx_ant[band], + scan_tx_antennas); + rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]); + scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); + + /* + * In power save mode while associated use one chain, + * otherwise use all chains + */ + if (test_bit(STATUS_POWER_PMI, &priv->status) && + !(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) { + /* rx_ant has been set to all valid chains previously */ + active_chains = rx_ant & + ((u8)(priv->chain_noise_data.active_chains)); + if (!active_chains) + active_chains = rx_ant; + + IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", + priv->chain_noise_data.active_chains); + + rx_ant = first_antenna(active_chains); + } + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + priv->bt_full_concurrent) { + /* operated as 1x1 in full concurrency mode */ + rx_ant = first_antenna(rx_ant); + } + + /* MIMO is not used here, but value is required */ + rx_chain |= + priv->eeprom_data->valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; + rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; + scan->rx_chain = cpu_to_le16(rx_chain); + switch (priv->scan_type) { + case IWL_SCAN_NORMAL: + cmd_len = iwl_fill_probe_req( + (struct ieee80211_mgmt *)scan->data, + vif->addr, + priv->scan_request->ie, + priv->scan_request->ie_len, + ssid, ssid_len, + scan_cmd_size - sizeof(*scan)); + break; + case IWL_SCAN_RADIO_RESET: + case IWL_SCAN_ROC: + /* use bcast addr, will not be transmitted but must be valid */ + cmd_len = iwl_fill_probe_req( + (struct ieee80211_mgmt *)scan->data, + iwl_bcast_addr, NULL, 0, + NULL, 0, + scan_cmd_size - sizeof(*scan)); + break; + default: + BUG(); + } + scan->tx_cmd.len = cpu_to_le16(cmd_len); + + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); + + switch (priv->scan_type) { + case IWL_SCAN_RADIO_RESET: + scan->channel_count = + iwl_get_channel_for_reset_scan(priv, vif, band, + (void *)&scan->data[cmd_len]); + break; + case IWL_SCAN_NORMAL: + scan->channel_count = + iwl_get_channels_for_scan(priv, vif, band, + is_active, n_probes, + (void *)&scan->data[cmd_len]); + break; + case IWL_SCAN_ROC: { + struct iwl_scan_channel *scan_ch; + int n_chan, i; + u16 dwell; + + dwell = iwl_limit_dwell(priv, priv->hw_roc_duration); + n_chan = DIV_ROUND_UP(priv->hw_roc_duration, dwell); + + scan->channel_count = n_chan; + + scan_ch = (void *)&scan->data[cmd_len]; + + for (i = 0; i < n_chan; i++) { + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + scan_ch->channel = + cpu_to_le16(priv->hw_roc_channel->hw_value); + + if (i == n_chan - 1) + dwell = priv->hw_roc_duration - i * dwell; + + scan_ch->active_dwell = + scan_ch->passive_dwell = cpu_to_le16(dwell); + + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + + scan_ch++; + } + } + + break; + } + + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); + return -EIO; + } + + cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct iwl_scan_channel); + cmd.data[0] = scan; + cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; + scan->len = cpu_to_le16(cmd.len[0]); + + /* set scan bit here for PAN params */ + set_bit(STATUS_SCAN_HW, &priv->status); + + ret = iwlagn_set_pan_params(priv); + if (ret) { + clear_bit(STATUS_SCAN_HW, &priv->status); + return ret; + } + + ret = iwl_dvm_send_cmd(priv, &cmd); + if (ret) { + clear_bit(STATUS_SCAN_HW, &priv->status); + iwlagn_set_pan_params(priv); + } + + return ret; +} + +void iwl_init_scan_params(struct iwl_priv *priv) +{ + u8 ant_idx = fls(priv->eeprom_data->valid_tx_ant) - 1; + if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx; + if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; +} + +int __must_check iwl_scan_initiate(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum iwl_scan_type scan_type, + enum ieee80211_band band) +{ + int ret; + + lockdep_assert_held(&priv->mutex); + + cancel_delayed_work(&priv->scan_check); + + if (!iwl_is_ready_rf(priv)) { + IWL_WARN(priv, "Request scan called when driver not ready.\n"); + return -EIO; + } + + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + IWL_DEBUG_SCAN(priv, + "Multiple concurrent scan requests in parallel.\n"); + return -EBUSY; + } + + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n"); + return -EBUSY; + } + + IWL_DEBUG_SCAN(priv, "Starting %sscan...\n", + scan_type == IWL_SCAN_NORMAL ? "" : + scan_type == IWL_SCAN_ROC ? "remain-on-channel " : + "internal short "); + + set_bit(STATUS_SCANNING, &priv->status); + priv->scan_type = scan_type; + priv->scan_start = jiffies; + priv->scan_band = band; + + ret = iwlagn_request_scan(priv, vif); + if (ret) { + clear_bit(STATUS_SCANNING, &priv->status); + priv->scan_type = IWL_SCAN_NORMAL; + return ret; + } + + queue_delayed_work(priv->workqueue, &priv->scan_check, + IWL_SCAN_CHECK_WATCHDOG); + + return 0; +} + + +/* + * internal short scan, this function should only been called while associated. + * It will reset and tune the radio to prevent possible RF related problem + */ +void iwl_internal_short_hw_scan(struct iwl_priv *priv) +{ + queue_work(priv->workqueue, &priv->start_internal_scan); +} + +static void iwl_bg_start_internal_scan(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, start_internal_scan); + + IWL_DEBUG_SCAN(priv, "Start internal scan\n"); + + mutex_lock(&priv->mutex); + + if (priv->scan_type == IWL_SCAN_RADIO_RESET) { + IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n"); + goto unlock; + } + + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); + goto unlock; + } + + if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band)) + IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n"); + unlock: + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_scan_check(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, scan_check.work); + + IWL_DEBUG_SCAN(priv, "Scan check work\n"); + + /* Since we are here firmware does not finish scan and + * most likely is in bad shape, so we don't bother to + * send abort command, just force scan complete to mac80211 */ + mutex_lock(&priv->mutex); + iwl_force_scan_end(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_abort_scan(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); + + IWL_DEBUG_SCAN(priv, "Abort scan work\n"); + + /* We keep scan_check work queued in case when firmware will not + * report back scan completed notification */ + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 200); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_scan_completed(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, scan_completed); + + mutex_lock(&priv->mutex); + iwl_process_scan_complete(priv); + mutex_unlock(&priv->mutex); +} + +void iwl_setup_scan_deferred_work(struct iwl_priv *priv) +{ + INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); + INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); + INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); + INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); +} + +void iwl_cancel_scan_deferred_work(struct iwl_priv *priv) +{ + cancel_work_sync(&priv->start_internal_scan); + cancel_work_sync(&priv->abort_scan); + cancel_work_sync(&priv->scan_completed); + + if (cancel_delayed_work_sync(&priv->scan_check)) { + mutex_lock(&priv->mutex); + iwl_force_scan_end(priv); + mutex_unlock(&priv->mutex); + } +} + +void iwl_scan_roc_expired(struct iwl_priv *priv) +{ + /* + * The status bit should be set here, to prevent a race + * where the atomic_read returns 1, but before the execution continues + * iwl_scan_offchannel_skb_status() checks if the status bit is set + */ + set_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status); + + if (atomic_read(&priv->num_aux_in_flight) == 0) { + ieee80211_remain_on_channel_expired(priv->hw); + priv->hw_roc_channel = NULL; + schedule_delayed_work(&priv->hw_roc_disable_work, + 10 * HZ); + + clear_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status); + } else { + IWL_DEBUG_SCAN(priv, "ROC done with %d frames in aux\n", + atomic_read(&priv->num_aux_in_flight)); + } +} + +void iwl_scan_offchannel_skb(struct iwl_priv *priv) +{ + WARN_ON(!priv->hw_roc_start_notified); + atomic_inc(&priv->num_aux_in_flight); +} + +void iwl_scan_offchannel_skb_status(struct iwl_priv *priv) +{ + if (atomic_dec_return(&priv->num_aux_in_flight) == 0 && + test_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status)) { + IWL_DEBUG_SCAN(priv, "0 aux frames. Calling ROC expired\n"); + iwl_scan_roc_expired(priv); + } +} diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c new file mode 100644 index 00000000000..b29b798f755 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -0,0 +1,1485 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/etherdevice.h> +#include <net/mac80211.h> +#include "iwl-trans.h" +#include "dev.h" +#include "agn.h" + +const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; + +static int iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id) +{ + lockdep_assert_held(&priv->sta_lock); + + if (sta_id >= IWLAGN_STATION_COUNT) { + IWL_ERR(priv, "invalid sta_id %u", sta_id); + return -EINVAL; + } + if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) + IWL_ERR(priv, "ACTIVATE a non DRIVER active station id %u " + "addr %pM\n", + sta_id, priv->stations[sta_id].sta.sta.addr); + + if (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) { + IWL_DEBUG_ASSOC(priv, + "STA id %u addr %pM already present in uCode " + "(according to driver)\n", + sta_id, priv->stations[sta_id].sta.sta.addr); + } else { + priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE; + IWL_DEBUG_ASSOC(priv, "Added STA id %u addr %pM to uCode\n", + sta_id, priv->stations[sta_id].sta.sta.addr); + } + return 0; +} + +static int iwl_process_add_sta_resp(struct iwl_priv *priv, + struct iwl_addsta_cmd *addsta, + struct iwl_rx_packet *pkt) +{ + struct iwl_add_sta_resp *add_sta_resp = (void *)pkt->data; + u8 sta_id = addsta->sta.sta_id; + int ret = -EIO; + + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n", + pkt->hdr.flags); + return ret; + } + + IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n", + sta_id); + + spin_lock(&priv->sta_lock); + + switch (add_sta_resp->status) { + case ADD_STA_SUCCESS_MSK: + IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n"); + ret = iwl_sta_ucode_activate(priv, sta_id); + break; + case ADD_STA_NO_ROOM_IN_TABLE: + IWL_ERR(priv, "Adding station %d failed, no room in table.\n", + sta_id); + break; + case ADD_STA_NO_BLOCK_ACK_RESOURCE: + IWL_ERR(priv, "Adding station %d failed, no block ack " + "resource.\n", sta_id); + break; + case ADD_STA_MODIFY_NON_EXIST_STA: + IWL_ERR(priv, "Attempting to modify non-existing station %d\n", + sta_id); + break; + default: + IWL_DEBUG_ASSOC(priv, "Received REPLY_ADD_STA:(0x%08X)\n", + add_sta_resp->status); + break; + } + + IWL_DEBUG_INFO(priv, "%s station id %u addr %pM\n", + priv->stations[sta_id].sta.mode == + STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", + sta_id, priv->stations[sta_id].sta.sta.addr); + + /* + * XXX: The MAC address in the command buffer is often changed from + * the original sent to the device. That is, the MAC address + * written to the command buffer often is not the same MAC address + * read from the command buffer when the command returns. This + * issue has not yet been resolved and this debugging is left to + * observe the problem. + */ + IWL_DEBUG_INFO(priv, "%s station according to cmd buffer %pM\n", + priv->stations[sta_id].sta.mode == + STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", + addsta->sta.addr); + spin_unlock(&priv->sta_lock); + + return ret; +} + +int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_addsta_cmd *addsta = + (struct iwl_addsta_cmd *) cmd->payload; + + return iwl_process_add_sta_resp(priv, addsta, pkt); +} + +int iwl_send_add_sta(struct iwl_priv *priv, + struct iwl_addsta_cmd *sta, u8 flags) +{ + int ret = 0; + struct iwl_host_cmd cmd = { + .id = REPLY_ADD_STA, + .flags = flags, + .data = { sta, }, + .len = { sizeof(*sta), }, + }; + u8 sta_id __maybe_unused = sta->sta.sta_id; + + IWL_DEBUG_INFO(priv, "Adding sta %u (%pM) %ssynchronously\n", + sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : ""); + + if (!(flags & CMD_ASYNC)) { + cmd.flags |= CMD_WANT_SKB; + might_sleep(); + } + + ret = iwl_dvm_send_cmd(priv, &cmd); + + if (ret || (flags & CMD_ASYNC)) + return ret; + /*else the command was successfully sent in SYNC mode, need to free + * the reply page */ + + iwl_free_resp(&cmd); + + if (cmd.handler_status) + IWL_ERR(priv, "%s - error in the CMD response %d", __func__, + cmd.handler_status); + + return cmd.handler_status; +} + +bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_sta_ht_cap *ht_cap) +{ + if (!ctx->ht.enabled || !ctx->ht.is_40mhz) + return false; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (priv->disable_ht40) + return false; +#endif + + /* + * Remainder of this function checks ht_cap, but if it's + * NULL then we can do HT40 (special case for RXON) + */ + if (!ht_cap) + return true; + + if (!ht_cap->ht_supported) + return false; + + if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return false; + + return true; +} + +static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, + struct ieee80211_sta *sta, + struct iwl_rxon_context *ctx, + __le32 *flags, __le32 *mask) +{ + struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; + u8 mimo_ps_mode; + + *mask = STA_FLG_RTS_MIMO_PROT_MSK | + STA_FLG_MIMO_DIS_MSK | + STA_FLG_HT40_EN_MSK | + STA_FLG_MAX_AGG_SIZE_MSK | + STA_FLG_AGG_MPDU_DENSITY_MSK; + *flags = 0; + + if (!sta || !sta_ht_inf->ht_supported) + return; + + mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; + + IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n", + sta->addr, + (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? + "static" : + (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? + "dynamic" : "disabled"); + + switch (mimo_ps_mode) { + case WLAN_HT_CAP_SM_PS_STATIC: + *flags |= STA_FLG_MIMO_DIS_MSK; + break; + case WLAN_HT_CAP_SM_PS_DYNAMIC: + *flags |= STA_FLG_RTS_MIMO_PROT_MSK; + break; + case WLAN_HT_CAP_SM_PS_DISABLED: + break; + default: + IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode); + break; + } + + *flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); + + *flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); + + if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + *flags |= STA_FLG_HT40_EN_MSK; +} + +int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct ieee80211_sta *sta) +{ + u8 sta_id = iwl_sta_id(sta); + __le32 flags, mask; + struct iwl_addsta_cmd cmd; + + if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) + return -EINVAL; + + iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask); + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].sta.station_flags &= ~mask; + priv->stations[sta_id].sta.station_flags |= flags; + spin_unlock_bh(&priv->sta_lock); + + memset(&cmd, 0, sizeof(cmd)); + cmd.mode = STA_CONTROL_MODIFY_MSK; + cmd.station_flags_msk = mask; + cmd.station_flags = flags; + cmd.sta.sta_id = sta_id; + + return iwl_send_add_sta(priv, &cmd, CMD_SYNC); +} + +static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, + struct ieee80211_sta *sta, + struct iwl_rxon_context *ctx) +{ + __le32 flags, mask; + + iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask); + + lockdep_assert_held(&priv->sta_lock); + priv->stations[index].sta.station_flags &= ~mask; + priv->stations[index].sta.station_flags |= flags; +} + +/** + * iwl_prep_station - Prepare station information for addition + * + * should be called with sta_lock held + */ +u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + const u8 *addr, bool is_ap, struct ieee80211_sta *sta) +{ + struct iwl_station_entry *station; + int i; + u8 sta_id = IWL_INVALID_STATION; + + if (is_ap) + sta_id = ctx->ap_sta_id; + else if (is_broadcast_ether_addr(addr)) + sta_id = ctx->bcast_sta_id; + else + for (i = IWL_STA_ID; i < IWLAGN_STATION_COUNT; i++) { + if (ether_addr_equal(priv->stations[i].sta.sta.addr, + addr)) { + sta_id = i; + break; + } + + if (!priv->stations[i].used && + sta_id == IWL_INVALID_STATION) + sta_id = i; + } + + /* + * These two conditions have the same outcome, but keep them + * separate + */ + if (unlikely(sta_id == IWL_INVALID_STATION)) + return sta_id; + + /* + * uCode is not able to deal with multiple requests to add a + * station. Keep track if one is in progress so that we do not send + * another. + */ + if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) { + IWL_DEBUG_INFO(priv, "STA %d already in process of being " + "added.\n", sta_id); + return sta_id; + } + + if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) && + (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) && + ether_addr_equal(priv->stations[sta_id].sta.sta.addr, addr)) { + IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not " + "adding again.\n", sta_id, addr); + return sta_id; + } + + station = &priv->stations[sta_id]; + station->used = IWL_STA_DRIVER_ACTIVE; + IWL_DEBUG_ASSOC(priv, "Add STA to driver ID %d: %pM\n", + sta_id, addr); + priv->num_stations++; + + /* Set up the REPLY_ADD_STA command to send to device */ + memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd)); + memcpy(station->sta.sta.addr, addr, ETH_ALEN); + station->sta.mode = 0; + station->sta.sta.sta_id = sta_id; + station->sta.station_flags = ctx->station_flags; + station->ctxid = ctx->ctxid; + + if (sta) { + struct iwl_station_priv *sta_priv; + + sta_priv = (void *)sta->drv_priv; + sta_priv->ctx = ctx; + } + + /* + * OK to call unconditionally, since local stations (IBSS BSSID + * STA and broadcast STA) pass in a NULL sta, and mac80211 + * doesn't allow HT IBSS. + */ + iwl_set_ht_add_station(priv, sta_id, sta, ctx); + + return sta_id; + +} + +#define STA_WAIT_TIMEOUT (HZ/2) + +/** + * iwl_add_station_common - + */ +int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + const u8 *addr, bool is_ap, + struct ieee80211_sta *sta, u8 *sta_id_r) +{ + int ret = 0; + u8 sta_id; + struct iwl_addsta_cmd sta_cmd; + + *sta_id_r = 0; + spin_lock_bh(&priv->sta_lock); + sta_id = iwl_prep_station(priv, ctx, addr, is_ap, sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Unable to prepare station %pM for addition\n", + addr); + spin_unlock_bh(&priv->sta_lock); + return -EINVAL; + } + + /* + * uCode is not able to deal with multiple requests to add a + * station. Keep track if one is in progress so that we do not send + * another. + */ + if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) { + IWL_DEBUG_INFO(priv, "STA %d already in process of being " + "added.\n", sta_id); + spin_unlock_bh(&priv->sta_lock); + return -EEXIST; + } + + if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) && + (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) { + IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not " + "adding again.\n", sta_id, addr); + spin_unlock_bh(&priv->sta_lock); + return -EEXIST; + } + + priv->stations[sta_id].used |= IWL_STA_UCODE_INPROGRESS; + memcpy(&sta_cmd, &priv->stations[sta_id].sta, + sizeof(struct iwl_addsta_cmd)); + spin_unlock_bh(&priv->sta_lock); + + /* Add station to device's station table */ + ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); + if (ret) { + spin_lock_bh(&priv->sta_lock); + IWL_ERR(priv, "Adding station %pM failed.\n", + priv->stations[sta_id].sta.sta.addr); + priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; + priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; + spin_unlock_bh(&priv->sta_lock); + } + *sta_id_r = sta_id; + return ret; +} + +/** + * iwl_sta_ucode_deactivate - deactivate ucode status for a station + */ +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, u8 sta_id) +{ + lockdep_assert_held(&priv->sta_lock); + + /* Ucode must be active and driver must be non active */ + if ((priv->stations[sta_id].used & + (IWL_STA_UCODE_ACTIVE | IWL_STA_DRIVER_ACTIVE)) != + IWL_STA_UCODE_ACTIVE) + IWL_ERR(priv, "removed non active STA %u\n", sta_id); + + priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE; + + memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry)); + IWL_DEBUG_ASSOC(priv, "Removed STA %u\n", sta_id); +} + +static int iwl_send_remove_station(struct iwl_priv *priv, + const u8 *addr, int sta_id, + bool temporary) +{ + struct iwl_rx_packet *pkt; + int ret; + struct iwl_rem_sta_cmd rm_sta_cmd; + + struct iwl_host_cmd cmd = { + .id = REPLY_REMOVE_STA, + .len = { sizeof(struct iwl_rem_sta_cmd), }, + .flags = CMD_SYNC, + .data = { &rm_sta_cmd, }, + }; + + memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd)); + rm_sta_cmd.num_sta = 1; + memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN); + + cmd.flags |= CMD_WANT_SKB; + + ret = iwl_dvm_send_cmd(priv, &cmd); + + if (ret) + return ret; + + pkt = cmd.resp_pkt; + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", + pkt->hdr.flags); + ret = -EIO; + } + + if (!ret) { + struct iwl_rem_sta_resp *rem_sta_resp = (void *)pkt->data; + switch (rem_sta_resp->status) { + case REM_STA_SUCCESS_MSK: + if (!temporary) { + spin_lock_bh(&priv->sta_lock); + iwl_sta_ucode_deactivate(priv, sta_id); + spin_unlock_bh(&priv->sta_lock); + } + IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n"); + break; + default: + ret = -EIO; + IWL_ERR(priv, "REPLY_REMOVE_STA failed\n"); + break; + } + } + iwl_free_resp(&cmd); + + return ret; +} + +/** + * iwl_remove_station - Remove driver's knowledge of station. + */ +int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id, + const u8 *addr) +{ + u8 tid; + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_INFO(priv, + "Unable to remove station %pM, device not ready.\n", + addr); + /* + * It is typical for stations to be removed when we are + * going down. Return success since device will be down + * soon anyway + */ + return 0; + } + + IWL_DEBUG_ASSOC(priv, "Removing STA from driver:%d %pM\n", + sta_id, addr); + + if (WARN_ON(sta_id == IWL_INVALID_STATION)) + return -EINVAL; + + spin_lock_bh(&priv->sta_lock); + + if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) { + IWL_DEBUG_INFO(priv, "Removing %pM but non DRIVER active\n", + addr); + goto out_err; + } + + if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) { + IWL_DEBUG_INFO(priv, "Removing %pM but non UCODE active\n", + addr); + goto out_err; + } + + if (priv->stations[sta_id].used & IWL_STA_LOCAL) { + kfree(priv->stations[sta_id].lq); + priv->stations[sta_id].lq = NULL; + } + + for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) + memset(&priv->tid_data[sta_id][tid], 0, + sizeof(priv->tid_data[sta_id][tid])); + + priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; + + priv->num_stations--; + + if (WARN_ON(priv->num_stations < 0)) + priv->num_stations = 0; + + spin_unlock_bh(&priv->sta_lock); + + return iwl_send_remove_station(priv, addr, sta_id, false); +out_err: + spin_unlock_bh(&priv->sta_lock); + return -EINVAL; +} + +void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id, + const u8 *addr) +{ + u8 tid; + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_INFO(priv, + "Unable to remove station %pM, device not ready.\n", + addr); + return; + } + + IWL_DEBUG_ASSOC(priv, "Deactivating STA: %pM (%d)\n", addr, sta_id); + + if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) + return; + + spin_lock_bh(&priv->sta_lock); + + WARN_ON_ONCE(!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)); + + for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) + memset(&priv->tid_data[sta_id][tid], 0, + sizeof(priv->tid_data[sta_id][tid])); + + priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; + + priv->num_stations--; + + if (WARN_ON_ONCE(priv->num_stations < 0)) + priv->num_stations = 0; + + spin_unlock_bh(&priv->sta_lock); +} + +static void iwl_sta_fill_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + u8 sta_id, struct iwl_link_quality_cmd *link_cmd) +{ + int i, r; + u32 rate_flags = 0; + __le32 rate_n_flags; + + lockdep_assert_held(&priv->mutex); + + memset(link_cmd, 0, sizeof(*link_cmd)); + + /* Set up the rate scaling to start at selected rate, fall back + * all the way down to 1M in IEEE order, and then spin on 1M */ + if (priv->band == IEEE80211_BAND_5GHZ) + r = IWL_RATE_6M_INDEX; + else if (ctx && ctx->vif && ctx->vif->p2p) + r = IWL_RATE_6M_INDEX; + else + r = IWL_RATE_1M_INDEX; + + if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + rate_flags |= first_antenna(priv->eeprom_data->valid_tx_ant) << + RATE_MCS_ANT_POS; + rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags); + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) + link_cmd->rs_table[i].rate_n_flags = rate_n_flags; + + link_cmd->general_params.single_stream_ant_msk = + first_antenna(priv->eeprom_data->valid_tx_ant); + + link_cmd->general_params.dual_stream_ant_msk = + priv->eeprom_data->valid_tx_ant & + ~first_antenna(priv->eeprom_data->valid_tx_ant); + if (!link_cmd->general_params.dual_stream_ant_msk) { + link_cmd->general_params.dual_stream_ant_msk = ANT_AB; + } else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) { + link_cmd->general_params.dual_stream_ant_msk = + priv->eeprom_data->valid_tx_ant; + } + + link_cmd->agg_params.agg_dis_start_th = + LINK_QUAL_AGG_DISABLE_START_DEF; + link_cmd->agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); + + link_cmd->sta_id = sta_id; +} + +/** + * iwl_clear_ucode_stations - clear ucode station table bits + * + * This function clears all the bits in the driver indicating + * which stations are active in the ucode. Call when something + * other than explicit station management would cause this in + * the ucode, e.g. unassociated RXON. + */ +void iwl_clear_ucode_stations(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int i; + bool cleared = false; + + IWL_DEBUG_INFO(priv, "Clearing ucode stations in driver\n"); + + spin_lock_bh(&priv->sta_lock); + for (i = 0; i < IWLAGN_STATION_COUNT; i++) { + if (ctx && ctx->ctxid != priv->stations[i].ctxid) + continue; + + if (priv->stations[i].used & IWL_STA_UCODE_ACTIVE) { + IWL_DEBUG_INFO(priv, + "Clearing ucode active for station %d\n", i); + priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE; + cleared = true; + } + } + spin_unlock_bh(&priv->sta_lock); + + if (!cleared) + IWL_DEBUG_INFO(priv, + "No active stations found to be cleared\n"); +} + +/** + * iwl_restore_stations() - Restore driver known stations to device + * + * All stations considered active by driver, but not present in ucode, is + * restored. + * + * Function sleeps. + */ +void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + struct iwl_addsta_cmd sta_cmd; + struct iwl_link_quality_cmd lq; + int i; + bool found = false; + int ret; + bool send_lq; + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_INFO(priv, + "Not ready yet, not restoring any stations.\n"); + return; + } + + IWL_DEBUG_ASSOC(priv, "Restoring all known stations ... start.\n"); + spin_lock_bh(&priv->sta_lock); + for (i = 0; i < IWLAGN_STATION_COUNT; i++) { + if (ctx->ctxid != priv->stations[i].ctxid) + continue; + if ((priv->stations[i].used & IWL_STA_DRIVER_ACTIVE) && + !(priv->stations[i].used & IWL_STA_UCODE_ACTIVE)) { + IWL_DEBUG_ASSOC(priv, "Restoring sta %pM\n", + priv->stations[i].sta.sta.addr); + priv->stations[i].sta.mode = 0; + priv->stations[i].used |= IWL_STA_UCODE_INPROGRESS; + found = true; + } + } + + for (i = 0; i < IWLAGN_STATION_COUNT; i++) { + if ((priv->stations[i].used & IWL_STA_UCODE_INPROGRESS)) { + memcpy(&sta_cmd, &priv->stations[i].sta, + sizeof(struct iwl_addsta_cmd)); + send_lq = false; + if (priv->stations[i].lq) { + if (priv->wowlan) + iwl_sta_fill_lq(priv, ctx, i, &lq); + else + memcpy(&lq, priv->stations[i].lq, + sizeof(struct iwl_link_quality_cmd)); + send_lq = true; + } + spin_unlock_bh(&priv->sta_lock); + ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); + if (ret) { + spin_lock_bh(&priv->sta_lock); + IWL_ERR(priv, "Adding station %pM failed.\n", + priv->stations[i].sta.sta.addr); + priv->stations[i].used &= + ~IWL_STA_DRIVER_ACTIVE; + priv->stations[i].used &= + ~IWL_STA_UCODE_INPROGRESS; + continue; + } + /* + * Rate scaling has already been initialized, send + * current LQ command + */ + if (send_lq) + iwl_send_lq_cmd(priv, ctx, &lq, + CMD_SYNC, true); + spin_lock_bh(&priv->sta_lock); + priv->stations[i].used &= ~IWL_STA_UCODE_INPROGRESS; + } + } + + spin_unlock_bh(&priv->sta_lock); + if (!found) + IWL_DEBUG_INFO(priv, "Restoring all known stations .... " + "no stations to be restored.\n"); + else + IWL_DEBUG_INFO(priv, "Restoring all known stations .... " + "complete.\n"); +} + +int iwl_get_free_ucode_key_offset(struct iwl_priv *priv) +{ + int i; + + for (i = 0; i < priv->sta_key_max_num; i++) + if (!test_and_set_bit(i, &priv->ucode_key_table)) + return i; + + return WEP_INVALID_OFFSET; +} + +void iwl_dealloc_bcast_stations(struct iwl_priv *priv) +{ + int i; + + spin_lock_bh(&priv->sta_lock); + for (i = 0; i < IWLAGN_STATION_COUNT; i++) { + if (!(priv->stations[i].used & IWL_STA_BCAST)) + continue; + + priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE; + priv->num_stations--; + if (WARN_ON(priv->num_stations < 0)) + priv->num_stations = 0; + kfree(priv->stations[i].lq); + priv->stations[i].lq = NULL; + } + spin_unlock_bh(&priv->sta_lock); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +static void iwl_dump_lq_cmd(struct iwl_priv *priv, + struct iwl_link_quality_cmd *lq) +{ + int i; + IWL_DEBUG_RATE(priv, "lq station id 0x%x\n", lq->sta_id); + IWL_DEBUG_RATE(priv, "lq ant 0x%X 0x%X\n", + lq->general_params.single_stream_ant_msk, + lq->general_params.dual_stream_ant_msk); + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) + IWL_DEBUG_RATE(priv, "lq index %d 0x%X\n", + i, lq->rs_table[i].rate_n_flags); +} +#else +static inline void iwl_dump_lq_cmd(struct iwl_priv *priv, + struct iwl_link_quality_cmd *lq) +{ +} +#endif + +/** + * is_lq_table_valid() - Test one aspect of LQ cmd for validity + * + * It sometimes happens when a HT rate has been in use and we + * loose connectivity with AP then mac80211 will first tell us that the + * current channel is not HT anymore before removing the station. In such a + * scenario the RXON flags will be updated to indicate we are not + * communicating HT anymore, but the LQ command may still contain HT rates. + * Test for this to prevent driver from sending LQ command between the time + * RXON flags are updated and when LQ command is updated. + */ +static bool is_lq_table_valid(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct iwl_link_quality_cmd *lq) +{ + int i; + + if (ctx->ht.enabled) + return true; + + IWL_DEBUG_INFO(priv, "Channel %u is not an HT channel\n", + ctx->active.channel); + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + if (le32_to_cpu(lq->rs_table[i].rate_n_flags) & + RATE_MCS_HT_MSK) { + IWL_DEBUG_INFO(priv, + "index %d of LQ expects HT channel\n", + i); + return false; + } + } + return true; +} + +/** + * iwl_send_lq_cmd() - Send link quality command + * @init: This command is sent as part of station initialization right + * after station has been added. + * + * The link quality command is sent as the last step of station creation. + * This is the special case in which init is set and we call a callback in + * this case to clear the state indicating that station creation is in + * progress. + */ +int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + struct iwl_link_quality_cmd *lq, u8 flags, bool init) +{ + int ret = 0; + struct iwl_host_cmd cmd = { + .id = REPLY_TX_LINK_QUALITY_CMD, + .len = { sizeof(struct iwl_link_quality_cmd), }, + .flags = flags, + .data = { lq, }, + }; + + if (WARN_ON(lq->sta_id == IWL_INVALID_STATION)) + return -EINVAL; + + + spin_lock_bh(&priv->sta_lock); + if (!(priv->stations[lq->sta_id].used & IWL_STA_DRIVER_ACTIVE)) { + spin_unlock_bh(&priv->sta_lock); + return -EINVAL; + } + spin_unlock_bh(&priv->sta_lock); + + iwl_dump_lq_cmd(priv, lq); + if (WARN_ON(init && (cmd.flags & CMD_ASYNC))) + return -EINVAL; + + if (is_lq_table_valid(priv, ctx, lq)) + ret = iwl_dvm_send_cmd(priv, &cmd); + else + ret = -EINVAL; + + if (cmd.flags & CMD_ASYNC) + return ret; + + if (init) { + IWL_DEBUG_INFO(priv, "init LQ command complete, " + "clearing sta addition status for sta %d\n", + lq->sta_id); + spin_lock_bh(&priv->sta_lock); + priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; + spin_unlock_bh(&priv->sta_lock); + } + return ret; +} + + +static struct iwl_link_quality_cmd * +iwl_sta_alloc_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, + u8 sta_id) +{ + struct iwl_link_quality_cmd *link_cmd; + + link_cmd = kzalloc(sizeof(struct iwl_link_quality_cmd), GFP_KERNEL); + if (!link_cmd) { + IWL_ERR(priv, "Unable to allocate memory for LQ cmd.\n"); + return NULL; + } + + iwl_sta_fill_lq(priv, ctx, sta_id, link_cmd); + + return link_cmd; +} + +/* + * iwlagn_add_bssid_station - Add the special IBSS BSSID station + * + * Function sleeps. + */ +int iwlagn_add_bssid_station(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + const u8 *addr, u8 *sta_id_r) +{ + int ret; + u8 sta_id; + struct iwl_link_quality_cmd *link_cmd; + + if (sta_id_r) + *sta_id_r = IWL_INVALID_STATION; + + ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id); + if (ret) { + IWL_ERR(priv, "Unable to add station %pM\n", addr); + return ret; + } + + if (sta_id_r) + *sta_id_r = sta_id; + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].used |= IWL_STA_LOCAL; + spin_unlock_bh(&priv->sta_lock); + + /* Set up default rate scaling table in device's station table */ + link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); + if (!link_cmd) { + IWL_ERR(priv, + "Unable to initialize rate scaling for station %pM.\n", + addr); + return -ENOMEM; + } + + ret = iwl_send_lq_cmd(priv, ctx, link_cmd, CMD_SYNC, true); + if (ret) + IWL_ERR(priv, "Link quality command failed (%d)\n", ret); + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].lq = link_cmd; + spin_unlock_bh(&priv->sta_lock); + + return 0; +} + +/* + * static WEP keys + * + * For each context, the device has a table of 4 static WEP keys + * (one for each key index) that is updated with the following + * commands. + */ + +static int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + bool send_if_empty) +{ + int i, not_empty = 0; + u8 buff[sizeof(struct iwl_wep_cmd) + + sizeof(struct iwl_wep_key) * WEP_KEYS_MAX]; + struct iwl_wep_cmd *wep_cmd = (struct iwl_wep_cmd *)buff; + size_t cmd_size = sizeof(struct iwl_wep_cmd); + struct iwl_host_cmd cmd = { + .id = ctx->wep_key_cmd, + .data = { wep_cmd, }, + .flags = CMD_SYNC, + }; + + might_sleep(); + + memset(wep_cmd, 0, cmd_size + + (sizeof(struct iwl_wep_key) * WEP_KEYS_MAX)); + + for (i = 0; i < WEP_KEYS_MAX ; i++) { + wep_cmd->key[i].key_index = i; + if (ctx->wep_keys[i].key_size) { + wep_cmd->key[i].key_offset = i; + not_empty = 1; + } else { + wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; + } + + wep_cmd->key[i].key_size = ctx->wep_keys[i].key_size; + memcpy(&wep_cmd->key[i].key[3], ctx->wep_keys[i].key, + ctx->wep_keys[i].key_size); + } + + wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; + wep_cmd->num_keys = WEP_KEYS_MAX; + + cmd_size += sizeof(struct iwl_wep_key) * WEP_KEYS_MAX; + + cmd.len[0] = cmd_size; + + if (not_empty || send_if_empty) + return iwl_dvm_send_cmd(priv, &cmd); + else + return 0; +} + +int iwl_restore_default_wep_keys(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + lockdep_assert_held(&priv->mutex); + + return iwl_send_static_wepkey_cmd(priv, ctx, false); +} + +int iwl_remove_default_wep_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *keyconf) +{ + int ret; + + lockdep_assert_held(&priv->mutex); + + IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n", + keyconf->keyidx); + + memset(&ctx->wep_keys[keyconf->keyidx], 0, sizeof(ctx->wep_keys[0])); + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_WEP(priv, + "Not sending REPLY_WEPKEY command due to RFKILL.\n"); + /* but keys in device are clear anyway so return success */ + return 0; + } + ret = iwl_send_static_wepkey_cmd(priv, ctx, 1); + IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n", + keyconf->keyidx, ret); + + return ret; +} + +int iwl_set_default_wep_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *keyconf) +{ + int ret; + + lockdep_assert_held(&priv->mutex); + + if (keyconf->keylen != WEP_KEY_LEN_128 && + keyconf->keylen != WEP_KEY_LEN_64) { + IWL_DEBUG_WEP(priv, + "Bad WEP key length %d\n", keyconf->keylen); + return -EINVAL; + } + + keyconf->hw_key_idx = IWLAGN_HW_KEY_DEFAULT; + + ctx->wep_keys[keyconf->keyidx].key_size = keyconf->keylen; + memcpy(&ctx->wep_keys[keyconf->keyidx].key, &keyconf->key, + keyconf->keylen); + + ret = iwl_send_static_wepkey_cmd(priv, ctx, false); + IWL_DEBUG_WEP(priv, "Set default WEP key: len=%d idx=%d ret=%d\n", + keyconf->keylen, keyconf->keyidx, ret); + + return ret; +} + +/* + * dynamic (per-station) keys + * + * The dynamic keys are a little more complicated. The device has + * a key cache of up to STA_KEY_MAX_NUM/STA_KEY_MAX_NUM_PAN keys. + * These are linked to stations by a table that contains an index + * into the key table for each station/key index/{mcast,unicast}, + * i.e. it's basically an array of pointers like this: + * key_offset_t key_mapping[NUM_STATIONS][4][2]; + * (it really works differently, but you can think of it as such) + * + * The key uploading and linking happens in the same command, the + * add station command with STA_MODIFY_KEY_MASK. + */ + +static u8 iwlagn_key_sta_id(struct iwl_priv *priv, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + if (sta) + return iwl_sta_id(sta); + + /* + * The device expects GTKs for station interfaces to be + * installed as GTKs for the AP station. If we have no + * station ID, then use the ap_sta_id in that case. + */ + if (vif->type == NL80211_IFTYPE_STATION && vif_priv->ctx) + return vif_priv->ctx->ap_sta_id; + + return IWL_INVALID_STATION; +} + +static int iwlagn_send_sta_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id, u32 tkip_iv32, u16 *tkip_p1k, + u32 cmd_flags) +{ + __le16 key_flags; + struct iwl_addsta_cmd sta_cmd; + int i; + + spin_lock_bh(&priv->sta_lock); + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd)); + spin_unlock_bh(&priv->sta_lock); + + key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags |= STA_KEY_FLG_MAP_KEY_MSK; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + key_flags |= STA_KEY_FLG_CCMP; + memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen); + break; + case WLAN_CIPHER_SUITE_TKIP: + key_flags |= STA_KEY_FLG_TKIP; + sta_cmd.key.tkip_rx_tsc_byte2 = tkip_iv32; + for (i = 0; i < 5; i++) + sta_cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]); + memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen); + break; + case WLAN_CIPHER_SUITE_WEP104: + key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; + /* fall through */ + case WLAN_CIPHER_SUITE_WEP40: + key_flags |= STA_KEY_FLG_WEP; + memcpy(&sta_cmd.key.key[3], keyconf->key, keyconf->keylen); + break; + default: + WARN_ON(1); + return -EINVAL; + } + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= STA_KEY_MULTICAST_MSK; + + /* key pointer (offset) */ + sta_cmd.key.key_offset = keyconf->hw_key_idx; + + sta_cmd.key.key_flags = key_flags; + sta_cmd.mode = STA_CONTROL_MODIFY_MSK; + sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; + + return iwl_send_add_sta(priv, &sta_cmd, cmd_flags); +} + +void iwl_update_tkip_key(struct iwl_priv *priv, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) +{ + u8 sta_id = iwlagn_key_sta_id(priv, vif, sta); + + if (sta_id == IWL_INVALID_STATION) + return; + + if (iwl_scan_cancel(priv)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } + + iwlagn_send_sta_key(priv, keyconf, sta_id, + iv32, phase1key, CMD_ASYNC); +} + +int iwl_remove_dynamic_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta) +{ + struct iwl_addsta_cmd sta_cmd; + u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); + __le16 key_flags; + + /* if station isn't there, neither is the key */ + if (sta_id == IWL_INVALID_STATION) + return -ENOENT; + + spin_lock_bh(&priv->sta_lock); + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd)); + if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) + sta_id = IWL_INVALID_STATION; + spin_unlock_bh(&priv->sta_lock); + + if (sta_id == IWL_INVALID_STATION) + return 0; + + lockdep_assert_held(&priv->mutex); + + ctx->key_mapping_keys--; + + IWL_DEBUG_WEP(priv, "Remove dynamic key: idx=%d sta=%d\n", + keyconf->keyidx, sta_id); + + if (!test_and_clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table)) + IWL_ERR(priv, "offset %d not used in uCode key table.\n", + keyconf->hw_key_idx); + + key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC | + STA_KEY_FLG_INVALID; + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= STA_KEY_MULTICAST_MSK; + + sta_cmd.key.key_flags = key_flags; + sta_cmd.key.key_offset = keyconf->hw_key_idx; + sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; + sta_cmd.mode = STA_CONTROL_MODIFY_MSK; + + return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); +} + +int iwl_set_dynamic_key(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta) +{ + struct ieee80211_key_seq seq; + u16 p1k[5]; + int ret; + u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); + const u8 *addr; + + if (sta_id == IWL_INVALID_STATION) + return -EINVAL; + + lockdep_assert_held(&priv->mutex); + + keyconf->hw_key_idx = iwl_get_free_ucode_key_offset(priv); + if (keyconf->hw_key_idx == WEP_INVALID_OFFSET) + return -ENOSPC; + + ctx->key_mapping_keys++; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + if (sta) + addr = sta->addr; + else /* station mode case only */ + addr = ctx->active.bssid_addr; + + /* pre-fill phase 1 key into device cache */ + ieee80211_get_key_rx_seq(keyconf, 0, &seq); + ieee80211_get_tkip_rx_p1k(keyconf, addr, seq.tkip.iv32, p1k); + ret = iwlagn_send_sta_key(priv, keyconf, sta_id, + seq.tkip.iv32, p1k, CMD_SYNC); + break; + case WLAN_CIPHER_SUITE_CCMP: + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + ret = iwlagn_send_sta_key(priv, keyconf, sta_id, + 0, NULL, CMD_SYNC); + break; + default: + IWL_ERR(priv, "Unknown cipher %x\n", keyconf->cipher); + ret = -EINVAL; + } + + if (ret) { + ctx->key_mapping_keys--; + clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table); + } + + IWL_DEBUG_WEP(priv, "Set dynamic key: cipher=%x len=%d idx=%d sta=%pM ret=%d\n", + keyconf->cipher, keyconf->keylen, keyconf->keyidx, + sta ? sta->addr : NULL, ret); + + return ret; +} + +/** + * iwlagn_alloc_bcast_station - add broadcast station into driver's station table. + * + * This adds the broadcast station into the driver's station table + * and marks it driver active, so that it will be restored to the + * device at the next best time. + */ +int iwlagn_alloc_bcast_station(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + struct iwl_link_quality_cmd *link_cmd; + u8 sta_id; + + spin_lock_bh(&priv->sta_lock); + sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Unable to prepare broadcast station\n"); + spin_unlock_bh(&priv->sta_lock); + + return -EINVAL; + } + + priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE; + priv->stations[sta_id].used |= IWL_STA_BCAST; + spin_unlock_bh(&priv->sta_lock); + + link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); + if (!link_cmd) { + IWL_ERR(priv, + "Unable to initialize rate scaling for bcast station.\n"); + return -ENOMEM; + } + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].lq = link_cmd; + spin_unlock_bh(&priv->sta_lock); + + return 0; +} + +/** + * iwl_update_bcast_station - update broadcast station's LQ command + * + * Only used by iwlagn. Placed here to have all bcast station management + * code together. + */ +int iwl_update_bcast_station(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + struct iwl_link_quality_cmd *link_cmd; + u8 sta_id = ctx->bcast_sta_id; + + link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); + if (!link_cmd) { + IWL_ERR(priv, "Unable to initialize rate scaling for bcast station.\n"); + return -ENOMEM; + } + + spin_lock_bh(&priv->sta_lock); + if (priv->stations[sta_id].lq) + kfree(priv->stations[sta_id].lq); + else + IWL_DEBUG_INFO(priv, "Bcast station rate scaling has not been initialized yet.\n"); + priv->stations[sta_id].lq = link_cmd; + spin_unlock_bh(&priv->sta_lock); + + return 0; +} + +int iwl_update_bcast_stations(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + int ret = 0; + + for_each_context(priv, ctx) { + ret = iwl_update_bcast_station(priv, ctx); + if (ret) + break; + } + + return ret; +} + +/** + * iwl_sta_tx_modify_enable_tid - Enable Tx for this TID in station table + */ +int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid) +{ + struct iwl_addsta_cmd sta_cmd; + + lockdep_assert_held(&priv->mutex); + + /* Remove "disable" flag, to enable Tx for this TID */ + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; + priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); + spin_unlock_bh(&priv->sta_lock); + + return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); +} + +int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta, + int tid, u16 ssn) +{ + int sta_id; + struct iwl_addsta_cmd sta_cmd; + + lockdep_assert_held(&priv->mutex); + + sta_id = iwl_sta_id(sta); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; + priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); + spin_unlock_bh(&priv->sta_lock); + + return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); +} + +int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta, + int tid) +{ + int sta_id; + struct iwl_addsta_cmd sta_cmd; + + lockdep_assert_held(&priv->mutex); + + sta_id = iwl_sta_id(sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); + return -ENXIO; + } + + spin_lock_bh(&priv->sta_lock); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; + priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); + spin_unlock_bh(&priv->sta_lock); + + return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); +} + + + +void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt) +{ + struct iwl_addsta_cmd cmd = { + .mode = STA_CONTROL_MODIFY_MSK, + .station_flags = STA_FLG_PWR_SAVE_MSK, + .station_flags_msk = STA_FLG_PWR_SAVE_MSK, + .sta.sta_id = sta_id, + .sta.modify_mask = STA_MODIFY_SLEEP_TX_COUNT_MSK, + .sleep_tx_count = cpu_to_le16(cnt), + }; + + iwl_send_add_sta(priv, &cmd, CMD_ASYNC); +} diff --git a/drivers/net/wireless/iwlwifi/dvm/testmode.c b/drivers/net/wireless/iwlwifi/dvm/testmode.c new file mode 100644 index 00000000000..57b918ce3b5 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/testmode.c @@ -0,0 +1,471 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <net/net_namespace.h> +#include <linux/netdevice.h> +#include <net/cfg80211.h> +#include <net/mac80211.h> +#include <net/netlink.h> + +#include "iwl-debug.h" +#include "iwl-trans.h" +#include "dev.h" +#include "agn.h" +#include "iwl-test.h" +#include "iwl-testmode.h" + +static int iwl_testmode_send_cmd(struct iwl_op_mode *op_mode, + struct iwl_host_cmd *cmd) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + return iwl_dvm_send_cmd(priv, cmd); +} + +static bool iwl_testmode_valid_hw_addr(u32 addr) +{ + if (iwlagn_hw_valid_rtc_data_addr(addr)) + return true; + + if (IWLAGN_RTC_INST_LOWER_BOUND <= addr && + addr < IWLAGN_RTC_INST_UPPER_BOUND) + return true; + + return false; +} + +static u32 iwl_testmode_get_fw_ver(struct iwl_op_mode *op_mode) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + return priv->fw->ucode_ver; +} + +static struct sk_buff* +iwl_testmode_alloc_reply(struct iwl_op_mode *op_mode, int len) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + return cfg80211_testmode_alloc_reply_skb(priv->hw->wiphy, len); +} + +static int iwl_testmode_reply(struct iwl_op_mode *op_mode, struct sk_buff *skb) +{ + return cfg80211_testmode_reply(skb); +} + +static struct sk_buff *iwl_testmode_alloc_event(struct iwl_op_mode *op_mode, + int len) +{ + struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); + return cfg80211_testmode_alloc_event_skb(priv->hw->wiphy, len, + GFP_ATOMIC); +} + +static void iwl_testmode_event(struct iwl_op_mode *op_mode, struct sk_buff *skb) +{ + return cfg80211_testmode_event(skb, GFP_ATOMIC); +} + +static struct iwl_test_ops tst_ops = { + .send_cmd = iwl_testmode_send_cmd, + .valid_hw_addr = iwl_testmode_valid_hw_addr, + .get_fw_ver = iwl_testmode_get_fw_ver, + .alloc_reply = iwl_testmode_alloc_reply, + .reply = iwl_testmode_reply, + .alloc_event = iwl_testmode_alloc_event, + .event = iwl_testmode_event, +}; + +void iwl_testmode_init(struct iwl_priv *priv) +{ + iwl_test_init(&priv->tst, priv->trans, &tst_ops); +} + +void iwl_testmode_free(struct iwl_priv *priv) +{ + iwl_test_free(&priv->tst); +} + +static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv) +{ + struct iwl_notification_wait calib_wait; + static const u8 calib_complete[] = { + CALIBRATION_COMPLETE_NOTIFICATION + }; + int ret; + + iwl_init_notification_wait(&priv->notif_wait, &calib_wait, + calib_complete, ARRAY_SIZE(calib_complete), + NULL, NULL); + ret = iwl_init_alive_start(priv); + if (ret) { + IWL_ERR(priv, "Fail init calibration: %d\n", ret); + goto cfg_init_calib_error; + } + + ret = iwl_wait_notification(&priv->notif_wait, &calib_wait, 2 * HZ); + if (ret) + IWL_ERR(priv, "Error detecting" + " CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret); + return ret; + +cfg_init_calib_error: + iwl_remove_notification(&priv->notif_wait, &calib_wait); + return ret; +} + +/* + * This function handles the user application commands for driver. + * + * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the + * handlers respectively. + * + * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned + * value of the actual command execution is replied to the user application. + * + * If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP + * is used for carry the message while IWL_TM_ATTR_COMMAND must set to + * IWL_TM_CMD_DEV2APP_SYNC_RSP. + * + * @hw: ieee80211_hw object that represents the device + * @tb: gnl message fields from the user space + */ +static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + struct iwl_trans *trans = priv->trans; + struct sk_buff *skb; + unsigned char *rsp_data_ptr = NULL; + int status = 0, rsp_data_len = 0; + u32 inst_size = 0, data_size = 0; + const struct fw_img *img; + + switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) { + case IWL_TM_CMD_APP2DEV_GET_DEVICENAME: + rsp_data_ptr = (unsigned char *)priv->cfg->name; + rsp_data_len = strlen(priv->cfg->name); + skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, + rsp_data_len + 20); + if (!skb) { + IWL_ERR(priv, "Memory allocation fail\n"); + return -ENOMEM; + } + if (nla_put_u32(skb, IWL_TM_ATTR_COMMAND, + IWL_TM_CMD_DEV2APP_SYNC_RSP) || + nla_put(skb, IWL_TM_ATTR_SYNC_RSP, + rsp_data_len, rsp_data_ptr)) + goto nla_put_failure; + status = cfg80211_testmode_reply(skb); + if (status < 0) + IWL_ERR(priv, "Error sending msg : %d\n", status); + break; + + case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: + status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT); + if (status) + IWL_ERR(priv, "Error loading init ucode: %d\n", status); + break; + + case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: + iwl_testmode_cfg_init_calib(priv); + priv->ucode_loaded = false; + iwl_trans_stop_device(trans); + break; + + case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: + status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR); + if (status) { + IWL_ERR(priv, + "Error loading runtime ucode: %d\n", status); + break; + } + status = iwl_alive_start(priv); + if (status) + IWL_ERR(priv, + "Error starting the device: %d\n", status); + break; + + case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: + iwl_scan_cancel_timeout(priv, 200); + priv->ucode_loaded = false; + iwl_trans_stop_device(trans); + status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); + if (status) { + IWL_ERR(priv, + "Error loading WOWLAN ucode: %d\n", status); + break; + } + status = iwl_alive_start(priv); + if (status) + IWL_ERR(priv, + "Error starting the device: %d\n", status); + break; + + case IWL_TM_CMD_APP2DEV_GET_EEPROM: + if (priv->eeprom_blob) { + skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, + priv->eeprom_blob_size + 20); + if (!skb) { + IWL_ERR(priv, "Memory allocation fail\n"); + return -ENOMEM; + } + if (nla_put_u32(skb, IWL_TM_ATTR_COMMAND, + IWL_TM_CMD_DEV2APP_EEPROM_RSP) || + nla_put(skb, IWL_TM_ATTR_EEPROM, + priv->eeprom_blob_size, + priv->eeprom_blob)) + goto nla_put_failure; + status = cfg80211_testmode_reply(skb); + if (status < 0) + IWL_ERR(priv, "Error sending msg : %d\n", + status); + } else + return -ENODATA; + break; + + case IWL_TM_CMD_APP2DEV_FIXRATE_REQ: + if (!tb[IWL_TM_ATTR_FIXRATE]) { + IWL_ERR(priv, "Missing fixrate setting\n"); + return -ENOMSG; + } + priv->tm_fixed_rate = nla_get_u32(tb[IWL_TM_ATTR_FIXRATE]); + break; + + case IWL_TM_CMD_APP2DEV_GET_FW_INFO: + skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20 + 8); + if (!skb) { + IWL_ERR(priv, "Memory allocation fail\n"); + return -ENOMEM; + } + if (!priv->ucode_loaded) { + IWL_ERR(priv, "No uCode has not been loaded\n"); + return -EINVAL; + } else { + img = &priv->fw->img[priv->cur_ucode]; + inst_size = img->sec[IWL_UCODE_SECTION_INST].len; + data_size = img->sec[IWL_UCODE_SECTION_DATA].len; + } + if (nla_put_u32(skb, IWL_TM_ATTR_FW_TYPE, priv->cur_ucode) || + nla_put_u32(skb, IWL_TM_ATTR_FW_INST_SIZE, inst_size) || + nla_put_u32(skb, IWL_TM_ATTR_FW_DATA_SIZE, data_size)) + goto nla_put_failure; + status = cfg80211_testmode_reply(skb); + if (status < 0) + IWL_ERR(priv, "Error sending msg : %d\n", status); + break; + + default: + IWL_ERR(priv, "Unknown testmode driver command ID\n"); + return -ENOSYS; + } + return status; + +nla_put_failure: + kfree_skb(skb); + return -EMSGSIZE; +} + +/* + * This function handles the user application switch ucode ownership. + * + * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_OWNER and + * decide who the current owner of the uCode + * + * If the current owner is OWNERSHIP_TM, then the only host command + * can deliver to uCode is from testmode, all the other host commands + * will dropped. + * + * default driver is the owner of uCode in normal operational mode + * + * @hw: ieee80211_hw object that represents the device + * @tb: gnl message fields from the user space + */ +static int iwl_testmode_ownership(struct ieee80211_hw *hw, struct nlattr **tb) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + u8 owner; + + if (!tb[IWL_TM_ATTR_UCODE_OWNER]) { + IWL_ERR(priv, "Missing ucode owner\n"); + return -ENOMSG; + } + + owner = nla_get_u8(tb[IWL_TM_ATTR_UCODE_OWNER]); + if (owner == IWL_OWNERSHIP_DRIVER) { + priv->ucode_owner = owner; + iwl_test_enable_notifications(&priv->tst, false); + } else if (owner == IWL_OWNERSHIP_TM) { + priv->ucode_owner = owner; + iwl_test_enable_notifications(&priv->tst, true); + } else { + IWL_ERR(priv, "Invalid owner\n"); + return -EINVAL; + } + return 0; +} + +/* The testmode gnl message handler that takes the gnl message from the + * user space and parses it per the policy iwl_testmode_gnl_msg_policy, then + * invoke the corresponding handlers. + * + * This function is invoked when there is user space application sending + * gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated + * by nl80211. + * + * It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before + * dispatching it to the corresponding handler. + * + * If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application; + * -ENOSYS is replied to the user application if the command is unknown; + * Otherwise, the command is dispatched to the respective handler. + * + * @hw: ieee80211_hw object that represents the device + * @data: pointer to user space message + * @len: length in byte of @data + */ +int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len) +{ + struct nlattr *tb[IWL_TM_ATTR_MAX]; + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + int result; + + result = iwl_test_parse(&priv->tst, tb, data, len); + if (result) + return result; + + /* in case multiple accesses to the device happens */ + mutex_lock(&priv->mutex); + switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) { + case IWL_TM_CMD_APP2DEV_UCODE: + case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32: + case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32: + case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8: + case IWL_TM_CMD_APP2DEV_BEGIN_TRACE: + case IWL_TM_CMD_APP2DEV_END_TRACE: + case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ: + case IWL_TM_CMD_APP2DEV_NOTIFICATIONS: + case IWL_TM_CMD_APP2DEV_GET_FW_VERSION: + case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: + case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE: + result = iwl_test_handle_cmd(&priv->tst, tb); + break; + + case IWL_TM_CMD_APP2DEV_GET_DEVICENAME: + case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: + case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: + case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: + case IWL_TM_CMD_APP2DEV_GET_EEPROM: + case IWL_TM_CMD_APP2DEV_FIXRATE_REQ: + case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: + case IWL_TM_CMD_APP2DEV_GET_FW_INFO: + IWL_DEBUG_INFO(priv, "testmode cmd to driver\n"); + result = iwl_testmode_driver(hw, tb); + break; + + case IWL_TM_CMD_APP2DEV_OWNERSHIP: + IWL_DEBUG_INFO(priv, "testmode change uCode ownership\n"); + result = iwl_testmode_ownership(hw, tb); + break; + + default: + IWL_ERR(priv, "Unknown testmode command\n"); + result = -ENOSYS; + break; + } + mutex_unlock(&priv->mutex); + + if (result) + IWL_ERR(priv, "Test cmd failed result=%d\n", result); + return result; +} + +int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len) +{ + struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + int result; + u32 cmd; + + if (cb->args[3]) { + /* offset by 1 since commands start at 0 */ + cmd = cb->args[3] - 1; + } else { + struct nlattr *tb[IWL_TM_ATTR_MAX]; + + result = iwl_test_parse(&priv->tst, tb, data, len); + if (result) + return result; + + cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]); + cb->args[3] = cmd + 1; + } + + /* in case multiple accesses to the device happens */ + mutex_lock(&priv->mutex); + result = iwl_test_dump(&priv->tst, cmd, skb, cb); + mutex_unlock(&priv->mutex); + return result; +} diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c new file mode 100644 index 00000000000..eb864433e59 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -0,0 +1,693 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <net/mac80211.h> +#include "iwl-io.h" +#include "iwl-modparams.h" +#include "iwl-debug.h" +#include "agn.h" +#include "dev.h" +#include "commands.h" +#include "tt.h" + +/* default Thermal Throttling transaction table + * Current state | Throttling Down | Throttling Up + *============================================================================= + * Condition Nxt State Condition Nxt State Condition Nxt State + *----------------------------------------------------------------------------- + * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A + * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0 + * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1 + * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 + *============================================================================= + */ +static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104}, + {IWL_TI_1, 105, CT_KILL_THRESHOLD - 1}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95}, + {IWL_TI_2, 110, CT_KILL_THRESHOLD - 1}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}, + {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} +}; +static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = { + {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD}, + {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}, + {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX} +}; + +/* Advance Thermal Throttling default restriction table */ +static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = { + {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true }, + {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true }, + {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false }, + {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false } +}; + +bool iwl_tt_is_low_power_state(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (tt->state >= IWL_TI_1) + return true; + return false; +} + +u8 iwl_tt_current_power_mode(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + return tt->tt_power_mode; +} + +bool iwl_ht_enabled(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + + if (!priv->thermal_throttle.advanced_tt) + return true; + restriction = tt->restriction + tt->state; + return restriction->is_ht; +} + +static bool iwl_within_ct_kill_margin(struct iwl_priv *priv) +{ + s32 temp = priv->temperature; /* degrees CELSIUS except specified */ + bool within_margin = false; + + if (!priv->thermal_throttle.advanced_tt) + within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >= + CT_KILL_THRESHOLD_LEGACY) ? true : false; + else + within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >= + CT_KILL_THRESHOLD) ? true : false; + return within_margin; +} + +bool iwl_check_for_ct_kill(struct iwl_priv *priv) +{ + bool is_ct_kill = false; + + if (iwl_within_ct_kill_margin(priv)) { + iwl_tt_enter_ct_kill(priv); + is_ct_kill = true; + } + return is_ct_kill; +} + +enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + + if (!priv->thermal_throttle.advanced_tt) + return IWL_ANT_OK_MULTI; + restriction = tt->restriction + tt->state; + return restriction->tx_stream; +} + +enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + struct iwl_tt_restriction *restriction; + + if (!priv->thermal_throttle.advanced_tt) + return IWL_ANT_OK_MULTI; + restriction = tt->restriction + tt->state; + return restriction->rx_stream; +} + +#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */ +#define CT_KILL_WAITING_DURATION (300) /* 300ms duration */ + +/* + * toggle the bit to wake up uCode and check the temperature + * if the temperature is below CT, uCode will stay awake and send card + * state notification with CT_KILL bit clear to inform Thermal Throttling + * Management to change state. Otherwise, uCode will go back to sleep + * without doing anything, driver should continue the 5 seconds timer + * to wake up uCode for temperature check until temperature drop below CT + */ +static void iwl_tt_check_exit_ct_kill(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + unsigned long flags; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (tt->state == IWL_TI_CT_KILL) { + if (priv->thermal_throttle.ct_kill_toggle) { + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + priv->thermal_throttle.ct_kill_toggle = false; + } else { + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + priv->thermal_throttle.ct_kill_toggle = true; + } + iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); + spin_lock_irqsave(&priv->trans->reg_lock, flags); + if (likely(iwl_grab_nic_access(priv->trans))) + iwl_release_nic_access(priv->trans); + spin_unlock_irqrestore(&priv->trans->reg_lock, flags); + + /* Reschedule the ct_kill timer to occur in + * CT_KILL_EXIT_DURATION seconds to ensure we get a + * thermal update */ + IWL_DEBUG_TEMP(priv, "schedule ct_kill exit timer\n"); + mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, + jiffies + CT_KILL_EXIT_DURATION * HZ); + } +} + +static void iwl_perform_ct_kill_task(struct iwl_priv *priv, + bool stop) +{ + if (stop) { + IWL_DEBUG_TEMP(priv, "Stop all queues\n"); + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + IWL_DEBUG_TEMP(priv, + "Schedule 5 seconds CT_KILL Timer\n"); + mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, + jiffies + CT_KILL_EXIT_DURATION * HZ); + } else { + IWL_DEBUG_TEMP(priv, "Wake all queues\n"); + if (priv->mac80211_registered) + ieee80211_wake_queues(priv->hw); + } +} + +static void iwl_tt_ready_for_ct_kill(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* temperature timer expired, ready to go into CT_KILL state */ + if (tt->state != IWL_TI_CT_KILL) { + IWL_DEBUG_TEMP(priv, "entering CT_KILL state when " + "temperature timer expired\n"); + tt->state = IWL_TI_CT_KILL; + set_bit(STATUS_CT_KILL, &priv->status); + iwl_perform_ct_kill_task(priv, true); + } +} + +static void iwl_prepare_ct_kill_task(struct iwl_priv *priv) +{ + IWL_DEBUG_TEMP(priv, "Prepare to enter IWL_TI_CT_KILL\n"); + /* make request to retrieve statistics information */ + iwl_send_statistics_request(priv, CMD_SYNC, false); + /* Reschedule the ct_kill wait timer */ + mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm, + jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION)); +} + +#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY) +#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100) +#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90) + +/* + * Legacy thermal throttling + * 1) Avoid NIC destruction due to high temperatures + * Chip will identify dangerously high temperatures that can + * harm the device and will power down + * 2) Avoid the NIC power down due to high temperature + * Throttle early enough to lower the power consumption before + * drastic steps are needed + */ +static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + enum iwl_tt_state old_state; + +#ifdef CONFIG_IWLWIFI_DEBUG + if ((tt->tt_previous_temp) && + (temp > tt->tt_previous_temp) && + ((temp - tt->tt_previous_temp) > + IWL_TT_INCREASE_MARGIN)) { + IWL_DEBUG_TEMP(priv, + "Temperature increase %d degree Celsius\n", + (temp - tt->tt_previous_temp)); + } +#endif + old_state = tt->state; + /* in Celsius */ + if (temp >= IWL_MINIMAL_POWER_THRESHOLD) + tt->state = IWL_TI_CT_KILL; + else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2) + tt->state = IWL_TI_2; + else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1) + tt->state = IWL_TI_1; + else + tt->state = IWL_TI_0; + +#ifdef CONFIG_IWLWIFI_DEBUG + tt->tt_previous_temp = temp; +#endif + /* stop ct_kill_waiting_tm timer */ + del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); + if (tt->state != old_state) { + switch (tt->state) { + case IWL_TI_0: + /* + * When the system is ready to go back to IWL_TI_0 + * we only have to call iwl_power_update_mode() to + * do so. + */ + break; + case IWL_TI_1: + tt->tt_power_mode = IWL_POWER_INDEX_3; + break; + case IWL_TI_2: + tt->tt_power_mode = IWL_POWER_INDEX_4; + break; + default: + tt->tt_power_mode = IWL_POWER_INDEX_5; + break; + } + mutex_lock(&priv->mutex); + if (old_state == IWL_TI_CT_KILL) + clear_bit(STATUS_CT_KILL, &priv->status); + if (tt->state != IWL_TI_CT_KILL && + iwl_power_update_mode(priv, true)) { + /* TT state not updated + * try again during next temperature read + */ + if (old_state == IWL_TI_CT_KILL) + set_bit(STATUS_CT_KILL, &priv->status); + tt->state = old_state; + IWL_ERR(priv, "Cannot update power mode, " + "TT state not updated\n"); + } else { + if (tt->state == IWL_TI_CT_KILL) { + if (force) { + set_bit(STATUS_CT_KILL, &priv->status); + iwl_perform_ct_kill_task(priv, true); + } else { + iwl_prepare_ct_kill_task(priv); + tt->state = old_state; + } + } else if (old_state == IWL_TI_CT_KILL && + tt->state != IWL_TI_CT_KILL) + iwl_perform_ct_kill_task(priv, false); + IWL_DEBUG_TEMP(priv, "Temperature state changed %u\n", + tt->state); + IWL_DEBUG_TEMP(priv, "Power Index change to %u\n", + tt->tt_power_mode); + } + mutex_unlock(&priv->mutex); + } +} + +/* + * Advance thermal throttling + * 1) Avoid NIC destruction due to high temperatures + * Chip will identify dangerously high temperatures that can + * harm the device and will power down + * 2) Avoid the NIC power down due to high temperature + * Throttle early enough to lower the power consumption before + * drastic steps are needed + * Actions include relaxing the power down sleep thresholds and + * decreasing the number of TX streams + * 3) Avoid throughput performance impact as much as possible + * + *============================================================================= + * Condition Nxt State Condition Nxt State Condition Nxt State + *----------------------------------------------------------------------------- + * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A + * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0 + * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1 + * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 + *============================================================================= + */ +static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + int i; + bool changed = false; + enum iwl_tt_state old_state; + struct iwl_tt_trans *transaction; + + old_state = tt->state; + for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) { + /* based on the current TT state, + * find the curresponding transaction table + * each table has (IWL_TI_STATE_MAX - 1) entries + * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1)) + * will advance to the correct table. + * then based on the current temperature + * find the next state need to transaction to + * go through all the possible (IWL_TI_STATE_MAX - 1) entries + * in the current table to see if transaction is needed + */ + transaction = tt->transaction + + ((old_state * (IWL_TI_STATE_MAX - 1)) + i); + if (temp >= transaction->tt_low && + temp <= transaction->tt_high) { +#ifdef CONFIG_IWLWIFI_DEBUG + if ((tt->tt_previous_temp) && + (temp > tt->tt_previous_temp) && + ((temp - tt->tt_previous_temp) > + IWL_TT_INCREASE_MARGIN)) { + IWL_DEBUG_TEMP(priv, + "Temperature increase %d " + "degree Celsius\n", + (temp - tt->tt_previous_temp)); + } + tt->tt_previous_temp = temp; +#endif + if (old_state != + transaction->next_state) { + changed = true; + tt->state = + transaction->next_state; + } + break; + } + } + /* stop ct_kill_waiting_tm timer */ + del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); + if (changed) { + if (tt->state >= IWL_TI_1) { + /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */ + tt->tt_power_mode = IWL_POWER_INDEX_5; + + if (!iwl_ht_enabled(priv)) { + struct iwl_rxon_context *ctx; + + for_each_context(priv, ctx) { + struct iwl_rxon_cmd *rxon; + + rxon = &ctx->staging; + + /* disable HT */ + rxon->flags &= ~( + RXON_FLG_CHANNEL_MODE_MSK | + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | + RXON_FLG_HT40_PROT_MSK | + RXON_FLG_HT_PROT_MSK); + } + } else { + /* check HT capability and set + * according to the system HT capability + * in case get disabled before */ + iwl_set_rxon_ht(priv, &priv->current_ht_config); + } + + } else { + /* + * restore system power setting -- it will be + * recalculated automatically. + */ + + /* check HT capability and set + * according to the system HT capability + * in case get disabled before */ + iwl_set_rxon_ht(priv, &priv->current_ht_config); + } + mutex_lock(&priv->mutex); + if (old_state == IWL_TI_CT_KILL) + clear_bit(STATUS_CT_KILL, &priv->status); + if (tt->state != IWL_TI_CT_KILL && + iwl_power_update_mode(priv, true)) { + /* TT state not updated + * try again during next temperature read + */ + IWL_ERR(priv, "Cannot update power mode, " + "TT state not updated\n"); + if (old_state == IWL_TI_CT_KILL) + set_bit(STATUS_CT_KILL, &priv->status); + tt->state = old_state; + } else { + IWL_DEBUG_TEMP(priv, + "Thermal Throttling to new state: %u\n", + tt->state); + if (old_state != IWL_TI_CT_KILL && + tt->state == IWL_TI_CT_KILL) { + if (force) { + IWL_DEBUG_TEMP(priv, + "Enter IWL_TI_CT_KILL\n"); + set_bit(STATUS_CT_KILL, &priv->status); + iwl_perform_ct_kill_task(priv, true); + } else { + iwl_prepare_ct_kill_task(priv); + tt->state = old_state; + } + } else if (old_state == IWL_TI_CT_KILL && + tt->state != IWL_TI_CT_KILL) { + IWL_DEBUG_TEMP(priv, "Exit IWL_TI_CT_KILL\n"); + iwl_perform_ct_kill_task(priv, false); + } + } + mutex_unlock(&priv->mutex); + } +} + +/* Card State Notification indicated reach critical temperature + * if PSP not enable, no Thermal Throttling function will be performed + * just set the GP1 bit to acknowledge the event + * otherwise, go into IWL_TI_CT_KILL state + * since Card State Notification will not provide any temperature reading + * for Legacy mode + * so just pass the CT_KILL temperature to iwl_legacy_tt_handler() + * for advance mode + * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state + */ +static void iwl_bg_ct_enter(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter); + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!iwl_is_ready(priv)) + return; + + if (tt->state != IWL_TI_CT_KILL) { + IWL_ERR(priv, "Device reached critical temperature " + "- ucode going to sleep!\n"); + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, + IWL_MINIMAL_POWER_THRESHOLD, + true); + else + iwl_advance_tt_handler(priv, + CT_KILL_THRESHOLD + 1, true); + } +} + +/* Card State Notification indicated out of critical temperature + * since Card State Notification will not provide any temperature reading + * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature + * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state + */ +static void iwl_bg_ct_exit(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit); + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!iwl_is_ready(priv)) + return; + + /* stop ct_kill_exit_tm timer */ + del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); + + if (tt->state == IWL_TI_CT_KILL) { + IWL_ERR(priv, + "Device temperature below critical" + "- ucode awake!\n"); + /* + * exit from CT_KILL state + * reset the current temperature reading + */ + priv->temperature = 0; + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, + IWL_REDUCED_PERFORMANCE_THRESHOLD_2, + true); + else + iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD, + true); + } +} + +void iwl_tt_enter_ct_kill(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_TEMP(priv, "Queueing critical temperature enter.\n"); + queue_work(priv->workqueue, &priv->ct_enter); +} + +void iwl_tt_exit_ct_kill(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_TEMP(priv, "Queueing critical temperature exit.\n"); + queue_work(priv->workqueue, &priv->ct_exit); +} + +static void iwl_bg_tt_work(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work); + s32 temp = priv->temperature; /* degrees CELSIUS except specified */ + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!priv->thermal_throttle.advanced_tt) + iwl_legacy_tt_handler(priv, temp, false); + else + iwl_advance_tt_handler(priv, temp, false); +} + +void iwl_tt_handler(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + IWL_DEBUG_TEMP(priv, "Queueing thermal throttling work.\n"); + queue_work(priv->workqueue, &priv->tt_work); +} + +/* Thermal throttling initialization + * For advance thermal throttling: + * Initialize Thermal Index and temperature threshold table + * Initialize thermal throttling restriction table + */ +void iwl_tt_initialize(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1); + struct iwl_tt_trans *transaction; + + IWL_DEBUG_TEMP(priv, "Initialize Thermal Throttling\n"); + + memset(tt, 0, sizeof(struct iwl_tt_mgmt)); + + tt->state = IWL_TI_0; + init_timer(&priv->thermal_throttle.ct_kill_exit_tm); + priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv; + priv->thermal_throttle.ct_kill_exit_tm.function = + iwl_tt_check_exit_ct_kill; + init_timer(&priv->thermal_throttle.ct_kill_waiting_tm); + priv->thermal_throttle.ct_kill_waiting_tm.data = + (unsigned long)priv; + priv->thermal_throttle.ct_kill_waiting_tm.function = + iwl_tt_ready_for_ct_kill; + /* setup deferred ct kill work */ + INIT_WORK(&priv->tt_work, iwl_bg_tt_work); + INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter); + INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit); + + if (priv->cfg->base_params->adv_thermal_throttle) { + IWL_DEBUG_TEMP(priv, "Advanced Thermal Throttling\n"); + tt->restriction = kcalloc(IWL_TI_STATE_MAX, + sizeof(struct iwl_tt_restriction), + GFP_KERNEL); + tt->transaction = kcalloc(IWL_TI_STATE_MAX * + (IWL_TI_STATE_MAX - 1), + sizeof(struct iwl_tt_trans), + GFP_KERNEL); + if (!tt->restriction || !tt->transaction) { + IWL_ERR(priv, "Fallback to Legacy Throttling\n"); + priv->thermal_throttle.advanced_tt = false; + kfree(tt->restriction); + tt->restriction = NULL; + kfree(tt->transaction); + tt->transaction = NULL; + } else { + transaction = tt->transaction + + (IWL_TI_0 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_0[0], size); + transaction = tt->transaction + + (IWL_TI_1 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_1[0], size); + transaction = tt->transaction + + (IWL_TI_2 * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_2[0], size); + transaction = tt->transaction + + (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1)); + memcpy(transaction, &tt_range_3[0], size); + size = sizeof(struct iwl_tt_restriction) * + IWL_TI_STATE_MAX; + memcpy(tt->restriction, + &restriction_range[0], size); + priv->thermal_throttle.advanced_tt = true; + } + } else { + IWL_DEBUG_TEMP(priv, "Legacy Thermal Throttling\n"); + priv->thermal_throttle.advanced_tt = false; + } +} + +/* cleanup thermal throttling management related memory and timer */ +void iwl_tt_exit(struct iwl_priv *priv) +{ + struct iwl_tt_mgmt *tt = &priv->thermal_throttle; + + /* stop ct_kill_exit_tm timer if activated */ + del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); + /* stop ct_kill_waiting_tm timer if activated */ + del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); + cancel_work_sync(&priv->tt_work); + cancel_work_sync(&priv->ct_enter); + cancel_work_sync(&priv->ct_exit); + + if (priv->thermal_throttle.advanced_tt) { + /* free advance thermal throttling memory */ + kfree(tt->restriction); + tt->restriction = NULL; + kfree(tt->transaction); + tt->transaction = NULL; + } +} diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.h b/drivers/net/wireless/iwlwifi/dvm/tt.h new file mode 100644 index 00000000000..44c7c8f30a2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/tt.h @@ -0,0 +1,128 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#ifndef __iwl_tt_setting_h__ +#define __iwl_tt_setting_h__ + +#include "commands.h" + +#define IWL_ABSOLUTE_ZERO 0 +#define IWL_ABSOLUTE_MAX 0xFFFFFFFF +#define IWL_TT_INCREASE_MARGIN 5 +#define IWL_TT_CT_KILL_MARGIN 3 + +enum iwl_antenna_ok { + IWL_ANT_OK_NONE, + IWL_ANT_OK_SINGLE, + IWL_ANT_OK_MULTI, +}; + +/* Thermal Throttling State Machine states */ +enum iwl_tt_state { + IWL_TI_0, /* normal temperature, system power state */ + IWL_TI_1, /* high temperature detect, low power state */ + IWL_TI_2, /* higher temperature detected, lower power state */ + IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */ + IWL_TI_STATE_MAX +}; + +/** + * struct iwl_tt_restriction - Thermal Throttling restriction table + * @tx_stream: number of tx stream allowed + * @is_ht: ht enable/disable + * @rx_stream: number of rx stream allowed + * + * This table is used by advance thermal throttling management + * based on the current thermal throttling state, and determines + * the number of tx/rx streams and the status of HT operation. + */ +struct iwl_tt_restriction { + enum iwl_antenna_ok tx_stream; + enum iwl_antenna_ok rx_stream; + bool is_ht; +}; + +/** + * struct iwl_tt_trans - Thermal Throttling transaction table + * @next_state: next thermal throttling mode + * @tt_low: low temperature threshold to change state + * @tt_high: high temperature threshold to change state + * + * This is used by the advanced thermal throttling algorithm + * to determine the next thermal state to go based on the + * current temperature. + */ +struct iwl_tt_trans { + enum iwl_tt_state next_state; + u32 tt_low; + u32 tt_high; +}; + +/** + * struct iwl_tt_mgnt - Thermal Throttling Management structure + * @advanced_tt: advanced thermal throttle required + * @state: current Thermal Throttling state + * @tt_power_mode: Thermal Throttling power mode index + * being used to set power level when + * when thermal throttling state != IWL_TI_0 + * the tt_power_mode should set to different + * power mode based on the current tt state + * @tt_previous_temperature: last measured temperature + * @iwl_tt_restriction: ptr to restriction tbl, used by advance + * thermal throttling to determine how many tx/rx streams + * should be used in tt state; and can HT be enabled or not + * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling + * state transaction + * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature + * @ct_kill_exit_tm: timer to exit thermal kill + */ +struct iwl_tt_mgmt { + enum iwl_tt_state state; + bool advanced_tt; + u8 tt_power_mode; + bool ct_kill_toggle; +#ifdef CONFIG_IWLWIFI_DEBUG + s32 tt_previous_temp; +#endif + struct iwl_tt_restriction *restriction; + struct iwl_tt_trans *transaction; + struct timer_list ct_kill_exit_tm; + struct timer_list ct_kill_waiting_tm; +}; + +u8 iwl_tt_current_power_mode(struct iwl_priv *priv); +bool iwl_tt_is_low_power_state(struct iwl_priv *priv); +bool iwl_ht_enabled(struct iwl_priv *priv); +enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv); +enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv); +void iwl_tt_enter_ct_kill(struct iwl_priv *priv); +void iwl_tt_exit_ct_kill(struct iwl_priv *priv); +void iwl_tt_handler(struct iwl_priv *priv); +void iwl_tt_initialize(struct iwl_priv *priv); +void iwl_tt_exit(struct iwl_priv *priv); + +#endif /* __iwl_tt_setting_h__ */ diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c new file mode 100644 index 00000000000..5971a23aa47 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -0,0 +1,1388 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ieee80211.h> +#include "iwl-io.h" +#include "iwl-trans.h" +#include "iwl-agn-hw.h" +#include "dev.h" +#include "agn.h" + +static const u8 tid_to_ac[] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO, +}; + +static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, + struct ieee80211_tx_info *info, + __le16 fc, __le32 *tx_flags) +{ + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || + info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || + info->flags & IEEE80211_TX_CTL_AMPDU) + *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; +} + +/* + * handle build REPLY_TX command notification. + */ +static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, + struct sk_buff *skb, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + struct ieee80211_hdr *hdr, u8 sta_id) +{ + __le16 fc = hdr->frame_control; + __le32 tx_flags = tx_cmd->tx_flags; + + tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) + tx_flags |= TX_CMD_FLG_ACK_MSK; + else + tx_flags &= ~TX_CMD_FLG_ACK_MSK; + + if (ieee80211_is_probe_resp(fc)) + tx_flags |= TX_CMD_FLG_TSF_MSK; + else if (ieee80211_is_back_req(fc)) + tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; + else if (info->band == IEEE80211_BAND_2GHZ && + priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + (ieee80211_is_auth(fc) || ieee80211_is_assoc_req(fc) || + ieee80211_is_reassoc_req(fc) || + skb->protocol == cpu_to_be16(ETH_P_PAE))) + tx_flags |= TX_CMD_FLG_IGNORE_BT; + + + tx_cmd->sta_id = sta_id; + if (ieee80211_has_morefrags(fc)) + tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tx_cmd->tid_tspec = qc[0] & 0xf; + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; + } else { + tx_cmd->tid_tspec = IWL_TID_NON_QOS; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + else + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; + } + + iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags); + + tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); + else + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); + } else { + tx_cmd->timeout.pm_frame_timeout = 0; + } + + tx_cmd->driver_txop = 0; + tx_cmd->tx_flags = tx_flags; + tx_cmd->next_frame_len = 0; +} + +static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + __le16 fc) +{ + u32 rate_flags; + int rate_idx; + u8 rts_retry_limit; + u8 data_retry_limit; + u8 rate_plcp; + + if (priv->wowlan) { + rts_retry_limit = IWLAGN_LOW_RETRY_LIMIT; + data_retry_limit = IWLAGN_LOW_RETRY_LIMIT; + } else { + /* Set retry limit on RTS packets */ + rts_retry_limit = IWLAGN_RTS_DFAULT_RETRY_LIMIT; + + /* Set retry limit on DATA packets and Probe Responses*/ + if (ieee80211_is_probe_resp(fc)) { + data_retry_limit = IWLAGN_MGMT_DFAULT_RETRY_LIMIT; + rts_retry_limit = + min(data_retry_limit, rts_retry_limit); + } else if (ieee80211_is_back_req(fc)) + data_retry_limit = IWLAGN_BAR_DFAULT_RETRY_LIMIT; + else + data_retry_limit = IWLAGN_DEFAULT_TX_RETRY; + } + + tx_cmd->data_retry_limit = data_retry_limit; + tx_cmd->rts_retry_limit = rts_retry_limit; + + /* DATA packets will use the uCode station table for rate/antenna + * selection */ + if (ieee80211_is_data(fc)) { + tx_cmd->initial_rate_index = 0; + tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + if (priv->tm_fixed_rate) { + /* + * rate overwrite by testmode + * we not only send lq command to change rate + * we also re-enforce per data pkt base. + */ + tx_cmd->tx_flags &= ~TX_CMD_FLG_STA_RATE_MSK; + memcpy(&tx_cmd->rate_n_flags, &priv->tm_fixed_rate, + sizeof(tx_cmd->rate_n_flags)); + } +#endif + return; + } else if (ieee80211_is_back_req(fc)) + tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; + + /** + * If the current TX rate stored in mac80211 has the MCS bit set, it's + * not really a TX rate. Thus, we use the lowest supported rate for + * this band. Also use the lowest supported rate if the stored rate + * index is invalid. + */ + rate_idx = info->control.rates[0].idx; + if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS || + (rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY)) + rate_idx = rate_lowest_index( + &priv->eeprom_data->bands[info->band], + info->control.sta); + /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx += IWL_FIRST_OFDM_RATE; + /* Get PLCP rate for tx_cmd->rate_n_flags */ + rate_plcp = iwl_rates[rate_idx].plcp; + /* Zero out flags for this packet */ + rate_flags = 0; + + /* Set CCK flag as needed */ + if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) + rate_flags |= RATE_MCS_CCK_MSK; + + /* Set up antennas */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + priv->bt_full_concurrent) { + /* operated as 1x1 in full concurrency mode */ + priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, + first_antenna(priv->eeprom_data->valid_tx_ant)); + } else + priv->mgmt_tx_ant = iwl_toggle_tx_ant( + priv, priv->mgmt_tx_ant, + priv->eeprom_data->valid_tx_ant); + rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant); + + /* Set the rate in the TX cmd */ + tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags); +} + +static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv, + struct ieee80211_tx_info *info, + struct iwl_tx_cmd *tx_cmd, + struct sk_buff *skb_frag) +{ + struct ieee80211_key_conf *keyconf = info->control.hw_key; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + tx_cmd->sec_ctl = TX_CMD_SEC_CCM; + memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); + if (info->flags & IEEE80211_TX_CTL_AMPDU) + tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; + IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); + break; + + case WLAN_CIPHER_SUITE_TKIP: + tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; + ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); + IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n"); + break; + + case WLAN_CIPHER_SUITE_WEP104: + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + /* fall through */ + case WLAN_CIPHER_SUITE_WEP40: + tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP | + (keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT); + + memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); + + IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " + "with key %d\n", keyconf->keyidx); + break; + + default: + IWL_ERR(priv, "Unknown encode cipher %x\n", keyconf->cipher); + break; + } +} + +/** + * iwl_sta_id_or_broadcast - return sta_id or broadcast sta + * @context: the current context + * @sta: mac80211 station + * + * In certain circumstances mac80211 passes a station pointer + * that may be %NULL, for example during TX or key setup. In + * that case, we need to use the broadcast station, so this + * inline wraps that pattern. + */ +static int iwl_sta_id_or_broadcast(struct iwl_rxon_context *context, + struct ieee80211_sta *sta) +{ + int sta_id; + + if (!sta) + return context->bcast_sta_id; + + sta_id = iwl_sta_id(sta); + + /* + * mac80211 should not be passing a partially + * initialised station! + */ + WARN_ON(sta_id == IWL_INVALID_STATION); + + return sta_id; +} + +/* + * start REPLY_TX command process + */ +int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_station_priv *sta_priv = NULL; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct iwl_device_cmd *dev_cmd; + struct iwl_tx_cmd *tx_cmd; + __le16 fc; + u8 hdr_len; + u16 len, seq_number = 0; + u8 sta_id, tid = IWL_MAX_TID_COUNT; + bool is_agg = false; + int txq_id; + + if (info->control.vif) + ctx = iwl_rxon_ctx_from_vif(info->control.vif); + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); + goto drop_unlock_priv; + } + + fc = hdr->frame_control; + +#ifdef CONFIG_IWLWIFI_DEBUG + if (ieee80211_is_auth(fc)) + IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); + else if (ieee80211_is_assoc_req(fc)) + IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); + else if (ieee80211_is_reassoc_req(fc)) + IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); +#endif + + if (unlikely(ieee80211_is_probe_resp(fc))) { + struct iwl_wipan_noa_data *noa_data = + rcu_dereference(priv->noa_data); + + if (noa_data && + pskb_expand_head(skb, 0, noa_data->length, + GFP_ATOMIC) == 0) { + memcpy(skb_put(skb, noa_data->length), + noa_data->data, noa_data->length); + hdr = (struct ieee80211_hdr *)skb->data; + } + } + + hdr_len = ieee80211_hdrlen(fc); + + /* For management frames use broadcast id to do not break aggregation */ + if (!ieee80211_is_data(fc)) + sta_id = ctx->bcast_sta_id; + else { + /* Find index into station table for destination station */ + sta_id = iwl_sta_id_or_broadcast(ctx, info->control.sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", + hdr->addr1); + goto drop_unlock_priv; + } + } + + IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); + + if (info->control.sta) + sta_priv = (void *)info->control.sta->drv_priv; + + if (sta_priv && sta_priv->asleep && + (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { + /* + * This sends an asynchronous command to the device, + * but we can rely on it being processed before the + * next frame is processed -- and the next frame to + * this station is the one that will consume this + * counter. + * For now set the counter to just 1 since we do not + * support uAPSD yet. + * + * FIXME: If we get two non-bufferable frames one + * after the other, we might only send out one of + * them because this is racy. + */ + iwl_sta_modify_sleep_tx_count(priv, sta_id, 1); + } + + if (info->flags & IEEE80211_TX_CTL_AMPDU) + is_agg = true; + + dev_cmd = iwl_trans_alloc_tx_cmd(priv->trans); + + if (unlikely(!dev_cmd)) + goto drop_unlock_priv; + + memset(dev_cmd, 0, sizeof(*dev_cmd)); + tx_cmd = (struct iwl_tx_cmd *) dev_cmd->payload; + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + + if (info->control.hw_key) + iwlagn_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb); + + /* TODO need this for burst mode later on */ + iwlagn_tx_cmd_build_basic(priv, skb, tx_cmd, info, hdr, sta_id); + + iwlagn_tx_cmd_build_rate(priv, tx_cmd, info, fc); + + memset(&info->status, 0, sizeof(info->status)); + + info->driver_data[0] = ctx; + info->driver_data[1] = dev_cmd; + /* From now on, we cannot access info->control */ + + spin_lock(&priv->sta_lock); + + if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc)) { + u8 *qc = NULL; + struct iwl_tid_data *tid_data; + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; + if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT)) + goto drop_unlock_sta; + tid_data = &priv->tid_data[sta_id][tid]; + + /* aggregation is on for this <sta,tid> */ + if (info->flags & IEEE80211_TX_CTL_AMPDU && + tid_data->agg.state != IWL_AGG_ON) { + IWL_ERR(priv, "TX_CTL_AMPDU while not in AGG:" + " Tx flags = 0x%08x, agg.state = %d", + info->flags, tid_data->agg.state); + IWL_ERR(priv, "sta_id = %d, tid = %d seq_num = %d", + sta_id, tid, SEQ_TO_SN(tid_data->seq_number)); + goto drop_unlock_sta; + } + + /* We can receive packets from the stack in IWL_AGG_{ON,OFF} + * only. Check this here. + */ + if (WARN_ONCE(tid_data->agg.state != IWL_AGG_ON && + tid_data->agg.state != IWL_AGG_OFF, + "Tx while agg.state = %d", tid_data->agg.state)) + goto drop_unlock_sta; + + seq_number = tid_data->seq_number; + seq_number &= IEEE80211_SCTL_SEQ; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(seq_number); + seq_number += 0x10; + } + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, hdr_len); + + if (is_agg) + txq_id = priv->tid_data[sta_id][tid].agg.txq_id; + else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { + /* + * Send this frame after DTIM -- there's a special queue + * reserved for this for contexts that support AP mode. + */ + txq_id = ctx->mcast_queue; + + /* + * The microcode will clear the more data + * bit in the last frame it transmits. + */ + hdr->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) + txq_id = IWL_AUX_QUEUE; + else + txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)]; + + WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue); + WARN_ON_ONCE(is_agg && + priv->queue_to_mac80211[txq_id] != info->hw_queue); + + if (iwl_trans_tx(priv->trans, skb, dev_cmd, txq_id)) + goto drop_unlock_sta; + + if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc) && + !ieee80211_has_morefrags(fc)) + priv->tid_data[sta_id][tid].seq_number = seq_number; + + spin_unlock(&priv->sta_lock); + + /* + * Avoid atomic ops if it isn't an associated client. + * Also, if this is a packet for aggregation, don't + * increase the counter because the ucode will stop + * aggregation queues when their respective station + * goes to sleep. + */ + if (sta_priv && sta_priv->client && !is_agg) + atomic_inc(&sta_priv->pending_frames); + + if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) + iwl_scan_offchannel_skb(priv); + + return 0; + +drop_unlock_sta: + if (dev_cmd) + iwl_trans_free_tx_cmd(priv->trans, dev_cmd); + spin_unlock(&priv->sta_lock); +drop_unlock_priv: + return -1; +} + +static int iwlagn_alloc_agg_txq(struct iwl_priv *priv, int mq) +{ + int q; + + for (q = IWLAGN_FIRST_AMPDU_QUEUE; + q < priv->cfg->base_params->num_of_queues; q++) { + if (!test_and_set_bit(q, priv->agg_q_alloc)) { + priv->queue_to_mac80211[q] = mq; + return q; + } + } + + return -ENOSPC; +} + +static void iwlagn_dealloc_agg_txq(struct iwl_priv *priv, int q) +{ + clear_bit(q, priv->agg_q_alloc); + priv->queue_to_mac80211[q] = IWL_INVALID_MAC80211_QUEUE; +} + +int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid) +{ + struct iwl_tid_data *tid_data; + int sta_id, txq_id; + enum iwl_agg_state agg_state; + + sta_id = iwl_sta_id(sta); + + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); + return -ENXIO; + } + + spin_lock_bh(&priv->sta_lock); + + tid_data = &priv->tid_data[sta_id][tid]; + txq_id = priv->tid_data[sta_id][tid].agg.txq_id; + + switch (priv->tid_data[sta_id][tid].agg.state) { + case IWL_EMPTYING_HW_QUEUE_ADDBA: + /* + * This can happen if the peer stops aggregation + * again before we've had a chance to drain the + * queue we selected previously, i.e. before the + * session was really started completely. + */ + IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); + goto turn_off; + case IWL_AGG_STARTING: + /* + * This can happen when the session is stopped before + * we receive ADDBA response + */ + IWL_DEBUG_HT(priv, "AGG stop before AGG became operational\n"); + goto turn_off; + case IWL_AGG_ON: + break; + default: + IWL_WARN(priv, "Stopping AGG while state not ON " + "or starting for %d on %d (%d)\n", sta_id, tid, + priv->tid_data[sta_id][tid].agg.state); + spin_unlock_bh(&priv->sta_lock); + return 0; + } + + tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number); + + /* There are still packets for this RA / TID in the HW */ + if (!test_bit(txq_id, priv->agg_q_alloc)) { + IWL_DEBUG_TX_QUEUES(priv, + "stopping AGG on STA/TID %d/%d but hwq %d not used\n", + sta_id, tid, txq_id); + } else if (tid_data->agg.ssn != tid_data->next_reclaimed) { + IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " + "next_recl = %d\n", + tid_data->agg.ssn, + tid_data->next_reclaimed); + priv->tid_data[sta_id][tid].agg.state = + IWL_EMPTYING_HW_QUEUE_DELBA; + spin_unlock_bh(&priv->sta_lock); + return 0; + } + + IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n", + tid_data->agg.ssn); +turn_off: + agg_state = priv->tid_data[sta_id][tid].agg.state; + priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF; + + spin_unlock_bh(&priv->sta_lock); + + if (test_bit(txq_id, priv->agg_q_alloc)) { + /* + * If the transport didn't know that we wanted to start + * agreggation, don't tell it that we want to stop them. + * This can happen when we don't get the addBA response on + * time, or we hadn't time to drain the AC queues. + */ + if (agg_state == IWL_AGG_ON) + iwl_trans_txq_disable(priv->trans, txq_id); + else + IWL_DEBUG_TX_QUEUES(priv, "Don't disable tx agg: %d\n", + agg_state); + iwlagn_dealloc_agg_txq(priv, txq_id); + } + + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + + return 0; +} + +int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 *ssn) +{ + struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + struct iwl_tid_data *tid_data; + int sta_id, txq_id, ret; + + IWL_DEBUG_HT(priv, "TX AGG request on ra = %pM tid = %d\n", + sta->addr, tid); + + sta_id = iwl_sta_id(sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Start AGG on invalid station\n"); + return -ENXIO; + } + if (unlikely(tid >= IWL_MAX_TID_COUNT)) + return -EINVAL; + + if (priv->tid_data[sta_id][tid].agg.state != IWL_AGG_OFF) { + IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n"); + return -ENXIO; + } + + txq_id = iwlagn_alloc_agg_txq(priv, ctx->ac_to_queue[tid_to_ac[tid]]); + if (txq_id < 0) { + IWL_DEBUG_TX_QUEUES(priv, + "No free aggregation queue for %pM/%d\n", + sta->addr, tid); + return txq_id; + } + + ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid); + if (ret) + return ret; + + spin_lock_bh(&priv->sta_lock); + tid_data = &priv->tid_data[sta_id][tid]; + tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number); + tid_data->agg.txq_id = txq_id; + + *ssn = tid_data->agg.ssn; + + if (*ssn == tid_data->next_reclaimed) { + IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n", + tid_data->agg.ssn); + tid_data->agg.state = IWL_AGG_STARTING; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + } else { + IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " + "next_reclaimed = %d\n", + tid_data->agg.ssn, + tid_data->next_reclaimed); + tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; + } + spin_unlock_bh(&priv->sta_lock); + + return ret; +} + +int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u8 buf_size) +{ + struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; + struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + int q, fifo; + u16 ssn; + + buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF); + + spin_lock_bh(&priv->sta_lock); + ssn = priv->tid_data[sta_priv->sta_id][tid].agg.ssn; + q = priv->tid_data[sta_priv->sta_id][tid].agg.txq_id; + priv->tid_data[sta_priv->sta_id][tid].agg.state = IWL_AGG_ON; + spin_unlock_bh(&priv->sta_lock); + + fifo = ctx->ac_to_fifo[tid_to_ac[tid]]; + + iwl_trans_txq_enable(priv->trans, q, fifo, sta_priv->sta_id, tid, + buf_size, ssn); + + /* + * If the limit is 0, then it wasn't initialised yet, + * use the default. We can do that since we take the + * minimum below, and we don't want to go above our + * default due to hardware restrictions. + */ + if (sta_priv->max_agg_bufsize == 0) + sta_priv->max_agg_bufsize = + LINK_QUAL_AGG_FRAME_LIMIT_DEF; + + /* + * Even though in theory the peer could have different + * aggregation reorder buffer sizes for different sessions, + * our ucode doesn't allow for that and has a global limit + * for each station. Therefore, use the minimum of all the + * aggregation sessions and our default value. + */ + sta_priv->max_agg_bufsize = + min(sta_priv->max_agg_bufsize, buf_size); + + if (priv->hw_params.use_rts_for_aggregation) { + /* + * switch to RTS/CTS if it is the prefer protection + * method for HT traffic + */ + + sta_priv->lq_sta.lq.general_params.flags |= + LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; + } + priv->agg_tids_count++; + IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", + priv->agg_tids_count); + + sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit = + sta_priv->max_agg_bufsize; + + IWL_DEBUG_HT(priv, "Tx aggregation enabled on ra = %pM tid = %d\n", + sta->addr, tid); + + return iwl_send_lq_cmd(priv, ctx, + &sta_priv->lq_sta.lq, CMD_ASYNC, false); +} + +static void iwlagn_check_ratid_empty(struct iwl_priv *priv, int sta_id, u8 tid) +{ + struct iwl_tid_data *tid_data = &priv->tid_data[sta_id][tid]; + enum iwl_rxon_context_id ctx; + struct ieee80211_vif *vif; + u8 *addr; + + lockdep_assert_held(&priv->sta_lock); + + addr = priv->stations[sta_id].sta.sta.addr; + ctx = priv->stations[sta_id].ctxid; + vif = priv->contexts[ctx].vif; + + switch (priv->tid_data[sta_id][tid].agg.state) { + case IWL_EMPTYING_HW_QUEUE_DELBA: + /* There are no packets for this RA / TID in the HW any more */ + if (tid_data->agg.ssn == tid_data->next_reclaimed) { + IWL_DEBUG_TX_QUEUES(priv, + "Can continue DELBA flow ssn = next_recl =" + " %d", tid_data->next_reclaimed); + iwl_trans_txq_disable(priv->trans, + tid_data->agg.txq_id); + iwlagn_dealloc_agg_txq(priv, tid_data->agg.txq_id); + tid_data->agg.state = IWL_AGG_OFF; + ieee80211_stop_tx_ba_cb_irqsafe(vif, addr, tid); + } + break; + case IWL_EMPTYING_HW_QUEUE_ADDBA: + /* There are no packets for this RA / TID in the HW any more */ + if (tid_data->agg.ssn == tid_data->next_reclaimed) { + IWL_DEBUG_TX_QUEUES(priv, + "Can continue ADDBA flow ssn = next_recl =" + " %d", tid_data->next_reclaimed); + tid_data->agg.state = IWL_AGG_STARTING; + ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid); + } + break; + default: + break; + } +} + +static void iwlagn_non_agg_tx_status(struct iwl_priv *priv, + struct iwl_rxon_context *ctx, + const u8 *addr1) +{ + struct ieee80211_sta *sta; + struct iwl_station_priv *sta_priv; + + rcu_read_lock(); + sta = ieee80211_find_sta(ctx->vif, addr1); + if (sta) { + sta_priv = (void *)sta->drv_priv; + /* avoid atomic ops if this isn't a client */ + if (sta_priv->client && + atomic_dec_return(&sta_priv->pending_frames) == 0) + ieee80211_sta_block_awake(priv->hw, sta, false); + } + rcu_read_unlock(); +} + +/** + * translate ucode response to mac80211 tx status control values + */ +static void iwlagn_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, + struct ieee80211_tx_info *info) +{ + struct ieee80211_tx_rate *r = &info->status.rates[0]; + + info->status.antenna = + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); + if (rate_n_flags & RATE_MCS_HT_MSK) + r->flags |= IEEE80211_TX_RC_MCS; + if (rate_n_flags & RATE_MCS_GF_MSK) + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; + if (rate_n_flags & RATE_MCS_HT40_MSK) + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + if (rate_n_flags & RATE_MCS_DUP_MSK) + r->flags |= IEEE80211_TX_RC_DUP_DATA; + if (rate_n_flags & RATE_MCS_SGI_MSK) + r->flags |= IEEE80211_TX_RC_SHORT_GI; + r->idx = iwlagn_hwrate_to_mac80211_idx(rate_n_flags, info->band); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +const char *iwl_get_tx_fail_reason(u32 status) +{ +#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x +#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x + + switch (status & TX_STATUS_MSK) { + case TX_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_POSTPONE(DELAY); + TX_STATUS_POSTPONE(FEW_BYTES); + TX_STATUS_POSTPONE(BT_PRIO); + TX_STATUS_POSTPONE(QUIET_PERIOD); + TX_STATUS_POSTPONE(CALC_TTAK); + TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); + TX_STATUS_FAIL(SHORT_LIMIT); + TX_STATUS_FAIL(LONG_LIMIT); + TX_STATUS_FAIL(FIFO_UNDERRUN); + TX_STATUS_FAIL(DRAIN_FLOW); + TX_STATUS_FAIL(RFKILL_FLUSH); + TX_STATUS_FAIL(LIFE_EXPIRE); + TX_STATUS_FAIL(DEST_PS); + TX_STATUS_FAIL(HOST_ABORTED); + TX_STATUS_FAIL(BT_RETRY); + TX_STATUS_FAIL(STA_INVALID); + TX_STATUS_FAIL(FRAG_DROPPED); + TX_STATUS_FAIL(TID_DISABLE); + TX_STATUS_FAIL(FIFO_FLUSHED); + TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); + TX_STATUS_FAIL(PASSIVE_NO_RX); + TX_STATUS_FAIL(NO_BEACON_ON_RADAR); + } + + return "UNKNOWN"; + +#undef TX_STATUS_FAIL +#undef TX_STATUS_POSTPONE +} +#endif /* CONFIG_IWLWIFI_DEBUG */ + +static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status) +{ + status &= AGG_TX_STATUS_MSK; + + switch (status) { + case AGG_TX_STATE_UNDERRUN_MSK: + priv->reply_agg_tx_stats.underrun++; + break; + case AGG_TX_STATE_BT_PRIO_MSK: + priv->reply_agg_tx_stats.bt_prio++; + break; + case AGG_TX_STATE_FEW_BYTES_MSK: + priv->reply_agg_tx_stats.few_bytes++; + break; + case AGG_TX_STATE_ABORT_MSK: + priv->reply_agg_tx_stats.abort++; + break; + case AGG_TX_STATE_LAST_SENT_TTL_MSK: + priv->reply_agg_tx_stats.last_sent_ttl++; + break; + case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK: + priv->reply_agg_tx_stats.last_sent_try++; + break; + case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK: + priv->reply_agg_tx_stats.last_sent_bt_kill++; + break; + case AGG_TX_STATE_SCD_QUERY_MSK: + priv->reply_agg_tx_stats.scd_query++; + break; + case AGG_TX_STATE_TEST_BAD_CRC32_MSK: + priv->reply_agg_tx_stats.bad_crc32++; + break; + case AGG_TX_STATE_RESPONSE_MSK: + priv->reply_agg_tx_stats.response++; + break; + case AGG_TX_STATE_DUMP_TX_MSK: + priv->reply_agg_tx_stats.dump_tx++; + break; + case AGG_TX_STATE_DELAY_TX_MSK: + priv->reply_agg_tx_stats.delay_tx++; + break; + default: + priv->reply_agg_tx_stats.unknown++; + break; + } +} + +static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, + struct iwlagn_tx_resp *tx_resp) +{ + struct agg_tx_status *frame_status = &tx_resp->status; + int tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >> + IWLAGN_TX_RES_TID_POS; + int sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> + IWLAGN_TX_RES_RA_POS; + struct iwl_ht_agg *agg = &priv->tid_data[sta_id][tid].agg; + u32 status = le16_to_cpu(tx_resp->status.status); + int i; + + WARN_ON(tid == IWL_TID_NON_QOS); + + if (agg->wait_for_ba) + IWL_DEBUG_TX_REPLY(priv, + "got tx response w/o block-ack\n"); + + agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); + agg->wait_for_ba = (tx_resp->frame_count > 1); + + /* + * If the BT kill count is non-zero, we'll get this + * notification again. + */ + if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 && + priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + IWL_DEBUG_COEX(priv, "receive reply tx w/ bt_kill\n"); + } + + if (tx_resp->frame_count == 1) + return; + + /* Construct bit-map of pending frames within Tx window */ + for (i = 0; i < tx_resp->frame_count; i++) { + u16 fstatus = le16_to_cpu(frame_status[i].status); + + if (status & AGG_TX_STATUS_MSK) + iwlagn_count_agg_tx_err_status(priv, fstatus); + + if (status & (AGG_TX_STATE_FEW_BYTES_MSK | + AGG_TX_STATE_ABORT_MSK)) + continue; + + IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), " + "try-count (0x%08x)\n", + iwl_get_agg_tx_fail_reason(fstatus), + fstatus & AGG_TX_STATUS_MSK, + fstatus & AGG_TX_TRY_MSK); + } +} + +#ifdef CONFIG_IWLWIFI_DEBUG +#define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x + +const char *iwl_get_agg_tx_fail_reason(u16 status) +{ + status &= AGG_TX_STATUS_MSK; + switch (status) { + case AGG_TX_STATE_TRANSMITTED: + return "SUCCESS"; + AGG_TX_STATE_FAIL(UNDERRUN_MSK); + AGG_TX_STATE_FAIL(BT_PRIO_MSK); + AGG_TX_STATE_FAIL(FEW_BYTES_MSK); + AGG_TX_STATE_FAIL(ABORT_MSK); + AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK); + AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK); + AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK); + AGG_TX_STATE_FAIL(SCD_QUERY_MSK); + AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK); + AGG_TX_STATE_FAIL(RESPONSE_MSK); + AGG_TX_STATE_FAIL(DUMP_TX_MSK); + AGG_TX_STATE_FAIL(DELAY_TX_MSK); + } + + return "UNKNOWN"; +} +#endif /* CONFIG_IWLWIFI_DEBUG */ + +static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp) +{ + return le32_to_cpup((__le32 *)&tx_resp->status + + tx_resp->frame_count) & MAX_SN; +} + +static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status) +{ + status &= TX_STATUS_MSK; + + switch (status) { + case TX_STATUS_POSTPONE_DELAY: + priv->reply_tx_stats.pp_delay++; + break; + case TX_STATUS_POSTPONE_FEW_BYTES: + priv->reply_tx_stats.pp_few_bytes++; + break; + case TX_STATUS_POSTPONE_BT_PRIO: + priv->reply_tx_stats.pp_bt_prio++; + break; + case TX_STATUS_POSTPONE_QUIET_PERIOD: + priv->reply_tx_stats.pp_quiet_period++; + break; + case TX_STATUS_POSTPONE_CALC_TTAK: + priv->reply_tx_stats.pp_calc_ttak++; + break; + case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: + priv->reply_tx_stats.int_crossed_retry++; + break; + case TX_STATUS_FAIL_SHORT_LIMIT: + priv->reply_tx_stats.short_limit++; + break; + case TX_STATUS_FAIL_LONG_LIMIT: + priv->reply_tx_stats.long_limit++; + break; + case TX_STATUS_FAIL_FIFO_UNDERRUN: + priv->reply_tx_stats.fifo_underrun++; + break; + case TX_STATUS_FAIL_DRAIN_FLOW: + priv->reply_tx_stats.drain_flow++; + break; + case TX_STATUS_FAIL_RFKILL_FLUSH: + priv->reply_tx_stats.rfkill_flush++; + break; + case TX_STATUS_FAIL_LIFE_EXPIRE: + priv->reply_tx_stats.life_expire++; + break; + case TX_STATUS_FAIL_DEST_PS: + priv->reply_tx_stats.dest_ps++; + break; + case TX_STATUS_FAIL_HOST_ABORTED: + priv->reply_tx_stats.host_abort++; + break; + case TX_STATUS_FAIL_BT_RETRY: + priv->reply_tx_stats.bt_retry++; + break; + case TX_STATUS_FAIL_STA_INVALID: + priv->reply_tx_stats.sta_invalid++; + break; + case TX_STATUS_FAIL_FRAG_DROPPED: + priv->reply_tx_stats.frag_drop++; + break; + case TX_STATUS_FAIL_TID_DISABLE: + priv->reply_tx_stats.tid_disable++; + break; + case TX_STATUS_FAIL_FIFO_FLUSHED: + priv->reply_tx_stats.fifo_flush++; + break; + case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL: + priv->reply_tx_stats.insuff_cf_poll++; + break; + case TX_STATUS_FAIL_PASSIVE_NO_RX: + priv->reply_tx_stats.fail_hw_drop++; + break; + case TX_STATUS_FAIL_NO_BEACON_ON_RADAR: + priv->reply_tx_stats.sta_color_mismatch++; + break; + default: + priv->reply_tx_stats.unknown++; + break; + } +} + +static void iwlagn_set_tx_status(struct iwl_priv *priv, + struct ieee80211_tx_info *info, + struct iwlagn_tx_resp *tx_resp, + bool is_agg) +{ + u16 status = le16_to_cpu(tx_resp->status.status); + + info->status.rates[0].count = tx_resp->failure_frame + 1; + if (is_agg) + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->flags |= iwl_tx_status_to_mac80211(status); + iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), + info); + if (!iwl_is_tx_success(status)) + iwlagn_count_tx_err_status(priv, status); +} + +static void iwl_check_abort_status(struct iwl_priv *priv, + u8 frame_count, u32 status) +{ + if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { + IWL_ERR(priv, "Tx flush command to flush out all frames\n"); + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + queue_work(priv->workqueue, &priv->tx_flush); + } +} + +static int iwl_reclaim(struct iwl_priv *priv, int sta_id, int tid, + int txq_id, int ssn, struct sk_buff_head *skbs) +{ + if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE && + tid != IWL_TID_NON_QOS && + txq_id != priv->tid_data[sta_id][tid].agg.txq_id)) { + /* + * FIXME: this is a uCode bug which need to be addressed, + * log the information and return for now. + * Since it is can possibly happen very often and in order + * not to fill the syslog, don't use IWL_ERR or IWL_WARN + */ + IWL_DEBUG_TX_QUEUES(priv, + "Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n", + txq_id, sta_id, tid, + priv->tid_data[sta_id][tid].agg.txq_id); + return 1; + } + + iwl_trans_reclaim(priv->trans, txq_id, ssn, skbs); + return 0; +} + +int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int cmd_index __maybe_unused = SEQ_TO_INDEX(sequence); + struct iwlagn_tx_resp *tx_resp = (void *)pkt->data; + struct ieee80211_hdr *hdr; + u32 status = le16_to_cpu(tx_resp->status.status); + u16 ssn = iwlagn_get_scd_ssn(tx_resp); + int tid; + int sta_id; + int freed; + struct ieee80211_tx_info *info; + struct sk_buff_head skbs; + struct sk_buff *skb; + struct iwl_rxon_context *ctx; + bool is_agg = (txq_id >= IWLAGN_FIRST_AMPDU_QUEUE); + bool is_offchannel_skb; + + tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >> + IWLAGN_TX_RES_TID_POS; + sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> + IWLAGN_TX_RES_RA_POS; + + spin_lock(&priv->sta_lock); + + if (is_agg) + iwl_rx_reply_tx_agg(priv, tx_resp); + + __skb_queue_head_init(&skbs); + + is_offchannel_skb = false; + + if (tx_resp->frame_count == 1) { + u16 next_reclaimed = le16_to_cpu(tx_resp->seq_ctl); + next_reclaimed = SEQ_TO_SN(next_reclaimed + 0x10); + + if (is_agg) { + /* If this is an aggregation queue, we can rely on the + * ssn since the wifi sequence number corresponds to + * the index in the TFD ring (%256). + * The seq_ctl is the sequence control of the packet + * to which this Tx response relates. But if there is a + * hole in the bitmap of the BA we received, this Tx + * response may allow to reclaim the hole and all the + * subsequent packets that were already acked. + * In that case, seq_ctl != ssn, and the next packet + * to be reclaimed will be ssn and not seq_ctl. + */ + next_reclaimed = ssn; + } + + if (tid != IWL_TID_NON_QOS) { + priv->tid_data[sta_id][tid].next_reclaimed = + next_reclaimed; + IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", + next_reclaimed); + } + + /*we can free until ssn % q.n_bd not inclusive */ + WARN_ON_ONCE(iwl_reclaim(priv, sta_id, tid, + txq_id, ssn, &skbs)); + iwlagn_check_ratid_empty(priv, sta_id, tid); + freed = 0; + + /* process frames */ + skb_queue_walk(&skbs, skb) { + hdr = (struct ieee80211_hdr *)skb->data; + + if (!ieee80211_is_data_qos(hdr->frame_control)) + priv->last_seq_ctl = tx_resp->seq_ctl; + + info = IEEE80211_SKB_CB(skb); + ctx = info->driver_data[0]; + iwl_trans_free_tx_cmd(priv->trans, + info->driver_data[1]); + + memset(&info->status, 0, sizeof(info->status)); + + if (status == TX_STATUS_FAIL_PASSIVE_NO_RX && + iwl_is_associated_ctx(ctx) && ctx->vif && + ctx->vif->type == NL80211_IFTYPE_STATION) { + /* block and stop all queues */ + priv->passive_no_rx = true; + IWL_DEBUG_TX_QUEUES(priv, "stop all queues: " + "passive channel"); + ieee80211_stop_queues(priv->hw); + + IWL_DEBUG_TX_REPLY(priv, + "TXQ %d status %s (0x%08x) " + "rate_n_flags 0x%x retries %d\n", + txq_id, + iwl_get_tx_fail_reason(status), + status, + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame); + + IWL_DEBUG_TX_REPLY(priv, + "FrameCnt = %d, idx=%d\n", + tx_resp->frame_count, cmd_index); + } + + /* check if BAR is needed */ + if (is_agg && !iwl_is_tx_success(status)) + info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + iwlagn_set_tx_status(priv, IEEE80211_SKB_CB(skb), + tx_resp, is_agg); + if (!is_agg) + iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1); + + is_offchannel_skb = + (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN); + freed++; + } + + WARN_ON(!is_agg && freed != 1); + + /* + * An offchannel frame can be send only on the AUX queue, where + * there is no aggregation (and reordering) so it only is single + * skb is expected to be processed. + */ + WARN_ON(is_offchannel_skb && freed != 1); + } + + iwl_check_abort_status(priv, tx_resp->frame_count, status); + spin_unlock(&priv->sta_lock); + + while (!skb_queue_empty(&skbs)) { + skb = __skb_dequeue(&skbs); + ieee80211_tx_status(priv->hw, skb); + } + + if (is_offchannel_skb) + iwl_scan_offchannel_skb_status(priv); + + return 0; +} + +/** + * iwlagn_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA + * + * Handles block-acknowledge notification from device, which reports success + * of frames sent via aggregation. + */ +int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data; + struct iwl_ht_agg *agg; + struct sk_buff_head reclaimed_skbs; + struct ieee80211_tx_info *info; + struct ieee80211_hdr *hdr; + struct sk_buff *skb; + int sta_id; + int tid; + int freed; + + /* "flow" corresponds to Tx queue */ + u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); + + /* "ssn" is start of block-ack Tx window, corresponds to index + * (in Tx queue's circular buffer) of first TFD/frame in window */ + u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); + + if (scd_flow >= priv->cfg->base_params->num_of_queues) { + IWL_ERR(priv, + "BUG_ON scd_flow is bigger than number of queues\n"); + return 0; + } + + sta_id = ba_resp->sta_id; + tid = ba_resp->tid; + agg = &priv->tid_data[sta_id][tid].agg; + + spin_lock(&priv->sta_lock); + + if (unlikely(!agg->wait_for_ba)) { + if (unlikely(ba_resp->bitmap)) + IWL_ERR(priv, "Received BA when not expected\n"); + spin_unlock(&priv->sta_lock); + return 0; + } + + __skb_queue_head_init(&reclaimed_skbs); + + /* Release all TFDs before the SSN, i.e. all TFDs in front of + * block-ack window (we assume that they've been successfully + * transmitted ... if not, it's too late anyway). */ + if (iwl_reclaim(priv, sta_id, tid, scd_flow, + ba_resp_scd_ssn, &reclaimed_skbs)) { + spin_unlock(&priv->sta_lock); + return 0; + } + + IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, " + "sta_id = %d\n", + agg->wait_for_ba, + (u8 *) &ba_resp->sta_addr_lo32, + ba_resp->sta_id); + IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, " + "scd_flow = %d, scd_ssn = %d sent:%d, acked:%d\n", + ba_resp->tid, le16_to_cpu(ba_resp->seq_ctl), + (unsigned long long)le64_to_cpu(ba_resp->bitmap), + scd_flow, ba_resp_scd_ssn, ba_resp->txed, + ba_resp->txed_2_done); + + /* Mark that the expected block-ack response arrived */ + agg->wait_for_ba = false; + + /* Sanity check values reported by uCode */ + if (ba_resp->txed_2_done > ba_resp->txed) { + IWL_DEBUG_TX_REPLY(priv, + "bogus sent(%d) and ack(%d) count\n", + ba_resp->txed, ba_resp->txed_2_done); + /* + * set txed_2_done = txed, + * so it won't impact rate scale + */ + ba_resp->txed = ba_resp->txed_2_done; + } + + priv->tid_data[sta_id][tid].next_reclaimed = ba_resp_scd_ssn; + + iwlagn_check_ratid_empty(priv, sta_id, tid); + freed = 0; + + skb_queue_walk(&reclaimed_skbs, skb) { + hdr = (struct ieee80211_hdr *)skb->data; + + if (ieee80211_is_data_qos(hdr->frame_control)) + freed++; + else + WARN_ON_ONCE(1); + + info = IEEE80211_SKB_CB(skb); + iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); + + if (freed == 1) { + /* this is the first skb we deliver in this batch */ + /* put the rate scaling data there */ + info = IEEE80211_SKB_CB(skb); + memset(&info->status, 0, sizeof(info->status)); + info->flags |= IEEE80211_TX_STAT_ACK; + info->flags |= IEEE80211_TX_STAT_AMPDU; + info->status.ampdu_ack_len = ba_resp->txed_2_done; + info->status.ampdu_len = ba_resp->txed; + iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, + info); + } + } + + spin_unlock(&priv->sta_lock); + + while (!skb_queue_empty(&reclaimed_skbs)) { + skb = __skb_dequeue(&reclaimed_skbs); + ieee80211_tx_status(priv->hw, skb); + } + + return 0; +} diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c new file mode 100644 index 00000000000..6d8d6dd7943 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -0,0 +1,557 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "iwl-io.h" +#include "iwl-agn-hw.h" +#include "iwl-trans.h" +#include "iwl-fh.h" +#include "iwl-op-mode.h" + +#include "dev.h" +#include "agn.h" +#include "calib.h" + +/****************************************************************************** + * + * uCode download functions + * + ******************************************************************************/ + +static inline const struct fw_img * +iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type) +{ + if (ucode_type >= IWL_UCODE_TYPE_MAX) + return NULL; + + return &priv->fw->img[ucode_type]; +} + +/* + * Calibration + */ +static int iwl_set_Xtal_calib(struct iwl_priv *priv) +{ + struct iwl_calib_xtal_freq_cmd cmd; + __le16 *xtal_calib = priv->eeprom_data->xtal_calib; + + iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD); + cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); + cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); + return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); +} + +static int iwl_set_temperature_offset_calib(struct iwl_priv *priv) +{ + struct iwl_calib_temperature_offset_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); + cmd.radio_sensor_offset = priv->eeprom_data->raw_temperature; + if (!(cmd.radio_sensor_offset)) + cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET; + + IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n", + le16_to_cpu(cmd.radio_sensor_offset)); + return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); +} + +static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv) +{ + struct iwl_calib_temperature_offset_v2_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); + cmd.radio_sensor_offset_high = priv->eeprom_data->kelvin_temperature; + cmd.radio_sensor_offset_low = priv->eeprom_data->raw_temperature; + if (!cmd.radio_sensor_offset_low) { + IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n"); + cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET; + cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET; + } + cmd.burntVoltageRef = priv->eeprom_data->calib_voltage; + + IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n", + le16_to_cpu(cmd.radio_sensor_offset_high)); + IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n", + le16_to_cpu(cmd.radio_sensor_offset_low)); + IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n", + le16_to_cpu(cmd.burntVoltageRef)); + + return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); +} + +static int iwl_send_calib_cfg(struct iwl_priv *priv) +{ + struct iwl_calib_cfg_cmd calib_cfg_cmd; + struct iwl_host_cmd cmd = { + .id = CALIBRATION_CFG_CMD, + .len = { sizeof(struct iwl_calib_cfg_cmd), }, + .data = { &calib_cfg_cmd, }, + }; + + memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); + calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.flags = + IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK; + + return iwl_dvm_send_cmd(priv, &cmd); +} + +int iwl_init_alive_start(struct iwl_priv *priv) +{ + int ret; + + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist) { + /* + * Tell uCode we are ready to perform calibration + * need to perform this before any calibration + * no need to close the envlope since we are going + * to load the runtime uCode later. + */ + ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, + BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); + if (ret) + return ret; + + } + + ret = iwl_send_calib_cfg(priv); + if (ret) + return ret; + + /** + * temperature offset calibration is only needed for runtime ucode, + * so prepare the value now. + */ + if (priv->cfg->need_temp_offset_calib) { + if (priv->cfg->temp_offset_v2) + return iwl_set_temperature_offset_calib_v2(priv); + else + return iwl_set_temperature_offset_calib(priv); + } + + return 0; +} + +static int iwl_send_wimax_coex(struct iwl_priv *priv) +{ + struct iwl_wimax_coex_cmd coex_cmd; + + /* coexistence is disabled */ + memset(&coex_cmd, 0, sizeof(coex_cmd)); + + return iwl_dvm_send_cmd_pdu(priv, + COEX_PRIORITY_TABLE_CMD, CMD_SYNC, + sizeof(coex_cmd), &coex_cmd); +} + +static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = { + ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + ((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | + (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), + 0, 0, 0, 0, 0, 0, 0 +}; + +void iwl_send_prio_tbl(struct iwl_priv *priv) +{ + struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd; + + memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl, + sizeof(iwl_bt_prio_tbl)); + if (iwl_dvm_send_cmd_pdu(priv, + REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC, + sizeof(prio_tbl_cmd), &prio_tbl_cmd)) + IWL_ERR(priv, "failed to send BT prio tbl command\n"); +} + +int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type) +{ + struct iwl_bt_coex_prot_env_cmd env_cmd; + int ret; + + env_cmd.action = action; + env_cmd.type = type; + ret = iwl_dvm_send_cmd_pdu(priv, + REPLY_BT_COEX_PROT_ENV, CMD_SYNC, + sizeof(env_cmd), &env_cmd); + if (ret) + IWL_ERR(priv, "failed to send BT env command\n"); + return ret; +} + +static const u8 iwlagn_default_queue_to_tx_fifo[] = { + IWL_TX_FIFO_VO, + IWL_TX_FIFO_VI, + IWL_TX_FIFO_BE, + IWL_TX_FIFO_BK, +}; + +static const u8 iwlagn_ipan_queue_to_tx_fifo[] = { + IWL_TX_FIFO_VO, + IWL_TX_FIFO_VI, + IWL_TX_FIFO_BE, + IWL_TX_FIFO_BK, + IWL_TX_FIFO_BK_IPAN, + IWL_TX_FIFO_BE_IPAN, + IWL_TX_FIFO_VI_IPAN, + IWL_TX_FIFO_VO_IPAN, + IWL_TX_FIFO_BE_IPAN, + IWL_TX_FIFO_UNUSED, + IWL_TX_FIFO_AUX, +}; + +static int iwl_alive_notify(struct iwl_priv *priv) +{ + const u8 *queue_to_txf; + u8 n_queues; + int ret; + int i; + + iwl_trans_fw_alive(priv->trans); + + if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN && + priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE) { + n_queues = ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo); + queue_to_txf = iwlagn_ipan_queue_to_tx_fifo; + } else { + n_queues = ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo); + queue_to_txf = iwlagn_default_queue_to_tx_fifo; + } + + for (i = 0; i < n_queues; i++) + if (queue_to_txf[i] != IWL_TX_FIFO_UNUSED) + iwl_trans_ac_txq_enable(priv->trans, i, + queue_to_txf[i]); + + priv->passive_no_rx = false; + priv->transport_queue_stop = 0; + + ret = iwl_send_wimax_coex(priv); + if (ret) + return ret; + + if (!priv->cfg->no_xtal_calib) { + ret = iwl_set_Xtal_calib(priv); + if (ret) + return ret; + } + + return iwl_send_calib_results(priv); +} + + +/** + * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int iwl_verify_sec_sparse(struct iwl_priv *priv, + const struct fw_desc *fw_desc) +{ + __le32 *image = (__le32 *)fw_desc->v_addr; + u32 len = fw_desc->len; + u32 val; + u32 i; + + IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); + + for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, + i + fw_desc->offset); + val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) + return -EIO; + } + + return 0; +} + +static void iwl_print_mismatch_sec(struct iwl_priv *priv, + const struct fw_desc *fw_desc) +{ + __le32 *image = (__le32 *)fw_desc->v_addr; + u32 len = fw_desc->len; + u32 val; + u32 offs; + int errors = 0; + + IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); + + iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, + fw_desc->offset); + + for (offs = 0; + offs < len && errors < 20; + offs += sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IWL_ERR(priv, "uCode INST section at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + offs, val, le32_to_cpu(*image)); + errors++; + } + } +} + +/** + * iwl_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +static int iwl_verify_ucode(struct iwl_priv *priv, + enum iwl_ucode_type ucode_type) +{ + const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type); + + if (!img) { + IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type); + return -EINVAL; + } + + if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) { + IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n"); + return 0; + } + + IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n"); + + iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]); + return -EIO; +} + +struct iwl_alive_data { + bool valid; + u8 subtype; +}; + +static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_priv *priv = + container_of(notif_wait, struct iwl_priv, notif_wait); + struct iwl_alive_data *alive_data = data; + struct iwl_alive_resp *palive; + + palive = (void *)pkt->data; + + IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision " + "0x%01X 0x%01X\n", + palive->is_valid, palive->ver_type, + palive->ver_subtype); + + priv->device_pointers.error_event_table = + le32_to_cpu(palive->error_event_table_ptr); + priv->device_pointers.log_event_table = + le32_to_cpu(palive->log_event_table_ptr); + + alive_data->subtype = palive->ver_subtype; + alive_data->valid = palive->is_valid == UCODE_VALID_OK; + + return true; +} + +#define UCODE_ALIVE_TIMEOUT HZ +#define UCODE_CALIB_TIMEOUT (2*HZ) + +int iwl_load_ucode_wait_alive(struct iwl_priv *priv, + enum iwl_ucode_type ucode_type) +{ + struct iwl_notification_wait alive_wait; + struct iwl_alive_data alive_data; + const struct fw_img *fw; + int ret; + enum iwl_ucode_type old_type; + static const u8 alive_cmd[] = { REPLY_ALIVE }; + + old_type = priv->cur_ucode; + priv->cur_ucode = ucode_type; + fw = iwl_get_ucode_image(priv, ucode_type); + + priv->ucode_loaded = false; + + if (!fw) + return -EINVAL; + + iwl_init_notification_wait(&priv->notif_wait, &alive_wait, + alive_cmd, ARRAY_SIZE(alive_cmd), + iwl_alive_fn, &alive_data); + + ret = iwl_trans_start_fw(priv->trans, fw); + if (ret) { + priv->cur_ucode = old_type; + iwl_remove_notification(&priv->notif_wait, &alive_wait); + return ret; + } + + /* + * Some things may run in the background now, but we + * just wait for the ALIVE notification here. + */ + ret = iwl_wait_notification(&priv->notif_wait, &alive_wait, + UCODE_ALIVE_TIMEOUT); + if (ret) { + priv->cur_ucode = old_type; + return ret; + } + + if (!alive_data.valid) { + IWL_ERR(priv, "Loaded ucode is not valid!\n"); + priv->cur_ucode = old_type; + return -EIO; + } + + /* + * This step takes a long time (60-80ms!!) and + * WoWLAN image should be loaded quickly, so + * skip it for WoWLAN. + */ + if (ucode_type != IWL_UCODE_WOWLAN) { + ret = iwl_verify_ucode(priv, ucode_type); + if (ret) { + priv->cur_ucode = old_type; + return ret; + } + + /* delay a bit to give rfkill time to run */ + msleep(5); + } + + ret = iwl_alive_notify(priv); + if (ret) { + IWL_WARN(priv, + "Could not complete ALIVE transition: %d\n", ret); + priv->cur_ucode = old_type; + return ret; + } + + priv->ucode_loaded = true; + + return 0; +} + +static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_priv *priv = data; + struct iwl_calib_hdr *hdr; + int len; + + if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) { + WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION); + return true; + } + + hdr = (struct iwl_calib_hdr *)pkt->data; + len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + + /* reduce the size by the length field itself */ + len -= sizeof(__le32); + + if (iwl_calib_set(priv, hdr, len)) + IWL_ERR(priv, "Failed to record calibration data %d\n", + hdr->op_code); + + return false; +} + +int iwl_run_init_ucode(struct iwl_priv *priv) +{ + struct iwl_notification_wait calib_wait; + static const u8 calib_complete[] = { + CALIBRATION_RES_NOTIFICATION, + CALIBRATION_COMPLETE_NOTIFICATION + }; + int ret; + + lockdep_assert_held(&priv->mutex); + + /* No init ucode required? Curious, but maybe ok */ + if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len) + return 0; + + if (priv->init_ucode_run) + return 0; + + iwl_init_notification_wait(&priv->notif_wait, &calib_wait, + calib_complete, ARRAY_SIZE(calib_complete), + iwlagn_wait_calib, priv); + + /* Will also start the device */ + ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT); + if (ret) + goto error; + + ret = iwl_init_alive_start(priv); + if (ret) + goto error; + + /* + * Some things may run in the background now, but we + * just wait for the calibration complete notification. + */ + ret = iwl_wait_notification(&priv->notif_wait, &calib_wait, + UCODE_CALIB_TIMEOUT); + if (!ret) + priv->init_ucode_run = true; + + goto out; + + error: + iwl_remove_notification(&priv->notif_wait, &calib_wait); + out: + /* Whatever happened, stop the device */ + iwl_trans_stop_device(priv->trans); + priv->ucode_loaded = false; + + return ret; +} |