summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn-rs.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rs.c2614
1 files changed, 2614 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
new file mode 100644
index 00000000000..754fef5b592
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -0,0 +1,2614 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/wireless.h>
+#include <net/mac80211.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+
+#include <linux/workqueue.h>
+
+#include "../net/mac80211/rate.h"
+
+#include "iwl-dev.h"
+#include "iwl-sta.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+
+#define RS_NAME "iwl-agn-rs"
+
+#define NUM_TRY_BEFORE_ANT_TOGGLE 1
+#define IWL_NUMBER_TRY 1
+#define IWL_HT_NUMBER_TRY 3
+
+#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
+#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
+#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
+
+/* max time to accum history 2 seconds */
+#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ)
+
+static u8 rs_ht_to_legacy[] = {
+ IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+ IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+ IWL_RATE_6M_INDEX,
+ IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
+ IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
+ IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
+ IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
+};
+
+static const u8 ant_toggle_lookup[] = {
+ /*ANT_NONE -> */ ANT_NONE,
+ /*ANT_A -> */ ANT_B,
+ /*ANT_B -> */ ANT_C,
+ /*ANT_AB -> */ ANT_BC,
+ /*ANT_C -> */ ANT_A,
+ /*ANT_AC -> */ ANT_AB,
+ /*ANT_BC -> */ ANT_AC,
+ /*ANT_ABC -> */ ANT_ABC,
+};
+
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+ u64 data; /* bitmap of successful frames */
+ s32 success_counter; /* number of frames successful */
+ s32 success_ratio; /* per-cent * 128 */
+ s32 counter; /* number of frames attempted */
+ s32 average_tpt; /* success ratio * expected throughput */
+ unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+ enum iwl_table_type lq_type;
+ u8 ant_type;
+ u8 is_SGI; /* 1 = short guard interval */
+ u8 is_fat; /* 1 = 40 MHz channel width */
+ u8 is_dup; /* 1 = duplicated data streams */
+ u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+ s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
+ u32 current_rate; /* rate_n_flags, uCode API format */
+ struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+ unsigned long time_stamp; /* age of the oldest statistics */
+ u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
+ * slice */
+ u32 total; /* total num of packets during the
+ * last TID_MAX_TIME_DIFF */
+ u8 queue_count; /* number of queues that has
+ * been used since the last cleanup */
+ u8 head; /* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+ u8 active_tbl; /* index of active table, range 0-1 */
+ u8 enable_counter; /* indicates HT mode */
+ u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
+ u8 search_better_tbl; /* 1: currently trying alternate mode */
+ s32 last_tpt;
+
+ /* The following determine when to search for a new mode */
+ u32 table_count_limit;
+ u32 max_failure_limit; /* # failed frames before new search */
+ u32 max_success_limit; /* # successful frames before new search */
+ u32 table_count;
+ u32 total_failed; /* total failed frames, any/all rates */
+ u32 total_success; /* total successful frames, any/all rates */
+ u32 flush_timer; /* time staying in mode before new search */
+
+ u8 action_counter; /* # mode-switch actions tried */
+ u8 is_green;
+ u8 is_dup;
+ enum ieee80211_band band;
+ u8 ibss_sta_added;
+
+ /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+ u32 supp_rates;
+ u16 active_legacy_rate;
+ u16 active_siso_rate;
+ u16 active_mimo2_rate;
+ u16 active_mimo3_rate;
+ u16 active_rate_basic;
+
+ struct iwl_link_quality_cmd lq;
+ struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+ struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
+ u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *rs_sta_dbgfs_scale_table_file;
+ struct dentry *rs_sta_dbgfs_stats_table_file;
+ struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+ u32 dbg_fixed_rate;
+#endif
+ struct iwl_priv *drv;
+};
+
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+ struct net_device *dev,
+ struct ieee80211_hdr *hdr,
+ struct sta_info *sta);
+static void rs_fill_link_cmd(const struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
+
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+ u32 *rate_n_flags, int index);
+#else
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+ u32 *rate_n_flags, int index)
+{}
+#endif
+
+/*
+ * Expected throughput metrics for following rates:
+ * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ * "G" is the only table that supports CCK (the first 4 rates).
+ */
+/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/
+static s32 expected_tpt_A[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
+};
+
+static s32 expected_tpt_G[IWL_RATE_COUNT] = {
+ 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
+};
+
+static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
+};
+
+static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
+};
+
+static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
+};
+
+static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
+};
+
+static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
+};
+
+static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
+};
+
+static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
+};
+
+static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
+ 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
+};
+
+static inline u8 rs_extract_rate(u32 rate_n_flags)
+{
+ return (u8)(rate_n_flags & 0xFF);
+}
+
+static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
+{
+ window->data = 0;
+ window->success_counter = 0;
+ window->success_ratio = IWL_INVALID_VALUE;
+ window->counter = 0;
+ window->average_tpt = IWL_INVALID_VALUE;
+ window->stamp = 0;
+}
+
+static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
+{
+ return (ant_type & valid_antenna) == ant_type;
+}
+
+/*
+ * removes the old data from the statistics. All data that is older than
+ * TID_MAX_TIME_DIFF, will be deleted.
+ */
+static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
+{
+ /* The oldest age we want to keep */
+ u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
+
+ while (tl->queue_count &&
+ (tl->time_stamp < oldest_time)) {
+ tl->total -= tl->packet_count[tl->head];
+ tl->packet_count[tl->head] = 0;
+ tl->time_stamp += TID_QUEUE_CELL_SPACING;
+ tl->queue_count--;
+ tl->head++;
+ if (tl->head >= TID_QUEUE_MAX_SIZE)
+ tl->head = 0;
+ }
+}
+
+/*
+ * increment traffic load value for tid and also remove
+ * any old values if passed the certain time period
+ */
+static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
+ struct ieee80211_hdr *hdr)
+{
+ u32 curr_time = jiffies_to_msecs(jiffies);
+ u32 time_diff;
+ s32 index;
+ struct iwl_traffic_load *tl = NULL;
+ __le16 fc = hdr->frame_control;
+ u8 tid;
+
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+ } else
+ return MAX_TID_COUNT;
+
+ tl = &lq_data->load[tid];
+
+ curr_time -= curr_time % TID_ROUND_VALUE;
+
+ /* Happens only for the first packet. Initialize the data */
+ if (!(tl->queue_count)) {
+ tl->total = 1;
+ tl->time_stamp = curr_time;
+ tl->queue_count = 1;
+ tl->head = 0;
+ tl->packet_count[0] = 1;
+ return MAX_TID_COUNT;
+ }
+
+ time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+ index = time_diff / TID_QUEUE_CELL_SPACING;
+
+ /* The history is too long: remove data that is older than */
+ /* TID_MAX_TIME_DIFF */
+ if (index >= TID_QUEUE_MAX_SIZE)
+ rs_tl_rm_old_stats(tl, curr_time);
+
+ index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
+ tl->packet_count[index] = tl->packet_count[index] + 1;
+ tl->total = tl->total + 1;
+
+ if ((index + 1) > tl->queue_count)
+ tl->queue_count = index + 1;
+
+ return tid;
+}
+
+/*
+ get the traffic load value for tid
+*/
+static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
+{
+ u32 curr_time = jiffies_to_msecs(jiffies);
+ u32 time_diff;
+ s32 index;
+ struct iwl_traffic_load *tl = NULL;
+
+ if (tid >= TID_MAX_LOAD_COUNT)
+ return 0;
+
+ tl = &(lq_data->load[tid]);
+
+ curr_time -= curr_time % TID_ROUND_VALUE;
+
+ if (!(tl->queue_count))
+ return 0;
+
+ time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+ index = time_diff / TID_QUEUE_CELL_SPACING;
+
+ /* The history is too long: remove data that is older than */
+ /* TID_MAX_TIME_DIFF */
+ if (index >= TID_QUEUE_MAX_SIZE)
+ rs_tl_rm_old_stats(tl, curr_time);
+
+ return tl->total;
+}
+
+static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_data, u8 tid,
+ struct sta_info *sta)
+{
+ unsigned long state;
+ DECLARE_MAC_BUF(mac);
+
+ spin_lock_bh(&sta->lock);
+ state = sta->ampdu_mlme.tid_state_tx[tid];
+ spin_unlock_bh(&sta->lock);
+
+ if (state == HT_AGG_STATE_IDLE &&
+ rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
+ IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n",
+ print_mac(mac, sta->addr), tid);
+ ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
+ }
+}
+
+static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
+ struct iwl_lq_sta *lq_data,
+ struct sta_info *sta)
+{
+ if ((tid < TID_MAX_LOAD_COUNT))
+ rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+ else if (tid == IWL_AGG_ALL_TID)
+ for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
+ rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+}
+
+static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
+{
+ return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
+ !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
+ !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
+}
+
+/**
+ * rs_collect_tx_data - Update the success/failure sliding window
+ *
+ * We keep a sliding window of the last 62 packets transmitted
+ * at this rate. window->data contains the bitmask of successful
+ * packets.
+ */
+static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
+ int scale_index, s32 tpt, int retries,
+ int successes)
+{
+ struct iwl_rate_scale_data *window = NULL;
+ static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
+ s32 fail_count;
+
+ if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
+ return -EINVAL;
+
+ /* Select data for current tx bit rate */
+ window = &(windows[scale_index]);
+
+ /*
+ * Keep track of only the latest 62 tx frame attempts in this rate's
+ * history window; anything older isn't really relevant any more.
+ * If we have filled up the sliding window, drop the oldest attempt;
+ * if the oldest attempt (highest bit in bitmap) shows "success",
+ * subtract "1" from the success counter (this is the main reason
+ * we keep these bitmaps!).
+ */
+ while (retries > 0) {
+ if (window->counter >= IWL_RATE_MAX_WINDOW) {
+
+ /* remove earliest */
+ window->counter = IWL_RATE_MAX_WINDOW - 1;
+
+ if (window->data & mask) {
+ window->data &= ~mask;
+ window->success_counter--;
+ }
+ }
+
+ /* Increment frames-attempted counter */
+ window->counter++;
+
+ /* Shift bitmap by one frame (throw away oldest history),
+ * OR in "1", and increment "success" if this
+ * frame was successful. */
+ window->data <<= 1;;
+ if (successes > 0) {
+ window->success_counter++;
+ window->data |= 0x1;
+ successes--;
+ }
+
+ retries--;
+ }
+
+ /* Calculate current success ratio, avoid divide-by-0! */
+ if (window->counter > 0)
+ window->success_ratio = 128 * (100 * window->success_counter)
+ / window->counter;
+ else
+ window->success_ratio = IWL_INVALID_VALUE;
+
+ fail_count = window->counter - window->success_counter;
+
+ /* Calculate average throughput, if we have enough history. */
+ if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
+ (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
+ window->average_tpt = (window->success_ratio * tpt + 64) / 128;
+ else
+ window->average_tpt = IWL_INVALID_VALUE;
+
+ /* Tag this window as having been updated */
+ window->stamp = jiffies;
+
+ return 0;
+}
+
+/*
+ * Fill uCode API rate_n_flags field, based on "search" or "active" table.
+ */
+/* FIXME:RS:remove this function and put the flags statically in the table */
+static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl,
+ int index, u8 use_green)
+{
+ u32 rate_n_flags = 0;
+
+ if (is_legacy(tbl->lq_type)) {
+ rate_n_flags = iwl_rates[index].plcp;
+ if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
+ rate_n_flags |= RATE_MCS_CCK_MSK;
+
+ } else if (is_Ht(tbl->lq_type)) {
+ if (index > IWL_LAST_OFDM_RATE) {
+ IWL_ERROR("invalid HT rate index %d\n", index);
+ index = IWL_LAST_OFDM_RATE;
+ }
+ rate_n_flags = RATE_MCS_HT_MSK;
+
+ if (is_siso(tbl->lq_type))
+ rate_n_flags |= iwl_rates[index].plcp_siso;
+ else if (is_mimo2(tbl->lq_type))
+ rate_n_flags |= iwl_rates[index].plcp_mimo2;
+ else
+ rate_n_flags |= iwl_rates[index].plcp_mimo3;
+ } else {
+ IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type);
+ }
+
+ rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
+ RATE_MCS_ANT_ABC_MSK);
+
+ if (is_Ht(tbl->lq_type)) {
+ if (tbl->is_fat) {
+ if (tbl->is_dup)
+ rate_n_flags |= RATE_MCS_DUP_MSK;
+ else
+ rate_n_flags |= RATE_MCS_FAT_MSK;
+ }
+ if (tbl->is_SGI)
+ rate_n_flags |= RATE_MCS_SGI_MSK;
+
+ if (use_green) {
+ rate_n_flags |= RATE_MCS_GF_MSK;
+ if (is_siso(tbl->lq_type) && tbl->is_SGI) {
+ rate_n_flags &= ~RATE_MCS_SGI_MSK;
+ IWL_ERROR("GF was set with SGI:SISO\n");
+ }
+ }
+ }
+ return rate_n_flags;
+}
+
+/*
+ * Interpret uCode API's rate_n_flags format,
+ * fill "search" or "active" tx mode table.
+ */
+static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
+ enum ieee80211_band band,
+ struct iwl_scale_tbl_info *tbl,
+ int *rate_idx)
+{
+ u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
+ u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
+ u8 mcs;
+
+ *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
+
+ if (*rate_idx == IWL_RATE_INVALID) {
+ *rate_idx = -1;
+ return -EINVAL;
+ }
+ tbl->is_SGI = 0; /* default legacy setup */
+ tbl->is_fat = 0;
+ tbl->is_dup = 0;
+ tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
+ tbl->lq_type = LQ_NONE;
+
+ /* legacy rate format */
+ if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
+ if (num_of_ant == 1) {
+ if (band == IEEE80211_BAND_5GHZ)
+ tbl->lq_type = LQ_A;
+ else
+ tbl->lq_type = LQ_G;
+ }
+ /* HT rate format */
+ } else {
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ tbl->is_SGI = 1;
+
+ if ((rate_n_flags & RATE_MCS_FAT_MSK) ||
+ (rate_n_flags & RATE_MCS_DUP_MSK))
+ tbl->is_fat = 1;
+
+ if (rate_n_flags & RATE_MCS_DUP_MSK)
+ tbl->is_dup = 1;
+
+ mcs = rs_extract_rate(rate_n_flags);
+
+ /* SISO */
+ if (mcs <= IWL_RATE_SISO_60M_PLCP) {
+ if (num_of_ant == 1)
+ tbl->lq_type = LQ_SISO; /*else NONE*/
+ /* MIMO2 */
+ } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
+ if (num_of_ant == 2)
+ tbl->lq_type = LQ_MIMO2;
+ /* MIMO3 */
+ } else {
+ if (num_of_ant == 3)
+ tbl->lq_type = LQ_MIMO3;
+ }
+ }
+ return 0;
+}
+
+/* switch to another antenna/antennas and return 1 */
+/* if no other valid antenna found, return 0 */
+static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
+ struct iwl_scale_tbl_info *tbl)
+{
+ u8 new_ant_type;
+
+ if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
+ return 0;
+
+ if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
+ return 0;
+
+ new_ant_type = ant_toggle_lookup[tbl->ant_type];
+
+ while ((new_ant_type != tbl->ant_type) &&
+ !rs_is_valid_ant(valid_ant, new_ant_type))
+ new_ant_type = ant_toggle_lookup[new_ant_type];
+
+ if (new_ant_type == tbl->ant_type)
+ return 0;
+
+ tbl->ant_type = new_ant_type;
+ *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
+ *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
+ return 1;
+}
+
+/* FIXME:RS: in 4965 we don't use greenfield at all */
+/* FIXME:RS: don't use greenfield for now in TX */
+#if 0
+static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+{
+ return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
+ priv->current_ht_config.is_green_field &&
+ !priv->current_ht_config.non_GF_STA_present;
+}
+#endif
+static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+{
+ return 0;
+}
+
+/**
+ * rs_get_supported_rates - get the available rates
+ *
+ * if management frame or broadcast frame only return
+ * basic available rates.
+ *
+ */
+static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
+ struct ieee80211_hdr *hdr,
+ enum iwl_table_type rate_type)
+{
+ if (hdr && is_multicast_ether_addr(hdr->addr1) &&
+ lq_sta->active_rate_basic)
+ return lq_sta->active_rate_basic;
+
+ if (is_legacy(rate_type)) {
+ return lq_sta->active_legacy_rate;
+ } else {
+ if (is_siso(rate_type))
+ return lq_sta->active_siso_rate;
+ else if (is_mimo2(rate_type))
+ return lq_sta->active_mimo2_rate;
+ else
+ return lq_sta->active_mimo3_rate;
+ }
+}
+
+static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
+ int rate_type)
+{
+ u8 high = IWL_RATE_INVALID;
+ u8 low = IWL_RATE_INVALID;
+
+ /* 802.11A or ht walks to the next literal adjacent rate in
+ * the rate table */
+ if (is_a_band(rate_type) || !is_legacy(rate_type)) {
+ int i;
+ u32 mask;
+
+ /* Find the previous rate that is in the rate mask */
+ i = index - 1;
+ for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
+ if (rate_mask & mask) {
+ low = i;
+ break;
+ }
+ }
+
+ /* Find the next rate that is in the rate mask */
+ i = index + 1;
+ for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
+ if (rate_mask & mask) {
+ high = i;
+ break;
+ }
+ }
+
+ return (high << 8) | low;
+ }
+
+ low = index;
+ while (low != IWL_RATE_INVALID) {
+ low = iwl_rates[low].prev_rs;
+ if (low == IWL_RATE_INVALID)
+ break;
+ if (rate_mask & (1 << low))
+ break;
+ IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
+ }
+
+ high = index;
+ while (high != IWL_RATE_INVALID) {
+ high = iwl_rates[high].next_rs;
+ if (high == IWL_RATE_INVALID)
+ break;
+ if (rate_mask & (1 << high))
+ break;
+ IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
+ }
+
+ return (high << 8) | low;
+}
+
+static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
+ struct iwl_scale_tbl_info *tbl,
+ u8 scale_index, u8 ht_possible)
+{
+ s32 low;
+ u16 rate_mask;
+ u16 high_low;
+ u8 switch_to_legacy = 0;
+ u8 is_green = lq_sta->is_green;
+
+ /* check if we need to switch from HT to legacy rates.
+ * assumption is that mandatory rates (1Mbps or 6Mbps)
+ * are always supported (spec demand) */
+ if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
+ switch_to_legacy = 1;
+ scale_index = rs_ht_to_legacy[scale_index];
+ if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ tbl->lq_type = LQ_A;
+ else
+ tbl->lq_type = LQ_G;
+
+ if (num_of_ant(tbl->ant_type) > 1)
+ tbl->ant_type = ANT_A;/*FIXME:RS*/
+
+ tbl->is_fat = 0;
+ tbl->is_SGI = 0;
+ }
+
+ rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
+
+ /* Mask with station rate restriction */
+ if (is_legacy(tbl->lq_type)) {
+ /* supp_rates has no CCK bits in A mode */
+ if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ rate_mask = (u16)(rate_mask &
+ (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+ else
+ rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
+ }
+
+ /* If we switched from HT to legacy, check current rate */
+ if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
+ low = scale_index;
+ goto out;
+ }
+
+ high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
+ tbl->lq_type);
+ low = high_low & 0xff;
+
+ if (low == IWL_RATE_INVALID)
+ low = scale_index;
+
+out:
+ return rate_n_flags_from_tbl(tbl, low, is_green);
+}
+
+/*
+ * mac80211 sends us Tx status
+ */
+static void rs_tx_status(void *priv_rate, struct net_device *dev,
+ struct sk_buff *skb)
+{
+ int status;
+ u8 retries;
+ int rs_index, index = 0;
+ struct iwl_lq_sta *lq_sta;
+ struct iwl_link_quality_cmd *table;
+ struct sta_info *sta;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw *hw = local_to_hw(local);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct iwl_rate_scale_data *window = NULL;
+ struct iwl_rate_scale_data *search_win = NULL;
+ u32 tx_rate;
+ struct iwl_scale_tbl_info tbl_type;
+ struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
+ u8 active_index = 0;
+ __le16 fc = hdr->frame_control;
+ s32 tpt = 0;
+
+ IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
+
+ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
+ return;
+
+ /* This packet was aggregated but doesn't carry rate scale info */
+ if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+ !(info->flags & IEEE80211_TX_STAT_AMPDU))
+ return;
+
+ retries = info->status.retry_count;
+
+ if (retries > 15)
+ retries = 15;
+
+ rcu_read_lock();
+
+ sta = sta_info_get(local, hdr->addr1);
+
+ if (!sta || !sta->rate_ctrl_priv)
+ goto out;
+
+
+ lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+
+ if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+ !lq_sta->ibss_sta_added)
+ goto out;
+
+ table = &lq_sta->lq;
+ active_index = lq_sta->active_tbl;
+
+ curr_tbl = &(lq_sta->lq_info[active_index]);
+ search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
+ window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
+ search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
+
+ /*
+ * Ignore this Tx frame response if its initial rate doesn't match
+ * that of latest Link Quality command. There may be stragglers
+ * from a previous Link Quality command, but we're no longer interested
+ * in those; they're either from the "active" mode while we're trying
+ * to check "search" mode, or a prior "search" mode after we've moved
+ * to a new "search" mode (which might become the new "active" mode).
+ */
+ tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+ rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+ if (priv->band == IEEE80211_BAND_5GHZ)
+ rs_index -= IWL_FIRST_OFDM_RATE;
+
+ if ((info->tx_rate_idx < 0) ||
+ (tbl_type.is_SGI ^
+ !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) ||
+ (tbl_type.is_fat ^
+ !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) ||
+ (tbl_type.is_dup ^
+ !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) ||
+ (tbl_type.ant_type ^ info->antenna_sel_tx) ||
+ (!!(tx_rate & RATE_MCS_HT_MSK) ^
+ !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) ||
+ (!!(tx_rate & RATE_MCS_GF_MSK) ^
+ !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) ||
+ (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
+ hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) {
+ IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
+ goto out;
+ }
+
+ /* Update frame history window with "failure" for each Tx retry. */
+ while (retries) {
+ /* Look up the rate and other info used for each tx attempt.
+ * Each tx attempt steps one entry deeper in the rate table. */
+ tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+ rs_get_tbl_info_from_mcs(tx_rate, priv->band,
+ &tbl_type, &rs_index);
+
+ /* If type matches "search" table,
+ * add failure to "search" history */
+ if ((tbl_type.lq_type == search_tbl->lq_type) &&
+ (tbl_type.ant_type == search_tbl->ant_type) &&
+ (tbl_type.is_SGI == search_tbl->is_SGI)) {
+ if (search_tbl->expected_tpt)
+ tpt = search_tbl->expected_tpt[rs_index];
+ else
+ tpt = 0;
+ rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
+
+ /* Else if type matches "current/active" table,
+ * add failure to "current/active" history */
+ } else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
+ (tbl_type.ant_type == curr_tbl->ant_type) &&
+ (tbl_type.is_SGI == curr_tbl->is_SGI)) {
+ if (curr_tbl->expected_tpt)
+ tpt = curr_tbl->expected_tpt[rs_index];
+ else
+ tpt = 0;
+ rs_collect_tx_data(window, rs_index, tpt, 1, 0);
+ }
+
+ /* If not searching for a new mode, increment failed counter
+ * ... this helps determine when to start searching again */
+ if (lq_sta->stay_in_tbl)
+ lq_sta->total_failed++;
+ --retries;
+ index++;
+
+ }
+
+ /*
+ * Find (by rate) the history window to update with final Tx attempt;
+ * if Tx was successful first try, use original rate,
+ * else look up the rate that was, finally, successful.
+ */
+ tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+ rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+
+ /* Update frame history window with "success" if Tx got ACKed ... */
+ status = !!(info->flags & IEEE80211_TX_STAT_ACK);
+
+ /* If type matches "search" table,
+ * add final tx status to "search" history */
+ if ((tbl_type.lq_type == search_tbl->lq_type) &&
+ (tbl_type.ant_type == search_tbl->ant_type) &&
+ (tbl_type.is_SGI == search_tbl->is_SGI)) {
+ if (search_tbl->expected_tpt)
+ tpt = search_tbl->expected_tpt[rs_index];
+ else
+ tpt = 0;
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ rs_collect_tx_data(search_win, rs_index, tpt,
+ info->status.ampdu_ack_len,
+ info->status.ampdu_ack_map);
+ else
+ rs_collect_tx_data(search_win, rs_index, tpt,
+ 1, status);
+ /* Else if type matches "current/active" table,
+ * add final tx status to "current/active" history */
+ } else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
+ (tbl_type.ant_type == curr_tbl->ant_type) &&
+ (tbl_type.is_SGI == curr_tbl->is_SGI)) {
+ if (curr_tbl->expected_tpt)
+ tpt = curr_tbl->expected_tpt[rs_index];
+ else
+ tpt = 0;
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ rs_collect_tx_data(window, rs_index, tpt,
+ info->status.ampdu_ack_len,
+ info->status.ampdu_ack_map);
+ else
+ rs_collect_tx_data(window, rs_index, tpt,
+ 1, status);
+ }
+
+ /* If not searching for new mode, increment success/failed counter
+ * ... these help determine when to start searching again */
+ if (lq_sta->stay_in_tbl) {
+ if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+ lq_sta->total_success += info->status.ampdu_ack_map;
+ lq_sta->total_failed +=
+ (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
+ } else {
+ if (status)
+ lq_sta->total_success++;
+ else
+ lq_sta->total_failed++;
+ }
+ }
+
+ /* See if there's a better rate or modulation mode to try. */
+ rs_rate_scale_perform(priv, dev, hdr, sta);
+out:
+ rcu_read_unlock();
+ return;
+}
+
+/*
+ * Begin a period of staying with a selected modulation mode.
+ * Set "stay_in_tbl" flag to prevent any mode switches.
+ * Set frame tx success limits according to legacy vs. high-throughput,
+ * and reset overall (spanning all rates) tx success history statistics.
+ * These control how long we stay using same modulation mode before
+ * searching for a new mode.
+ */
+static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
+ struct iwl_lq_sta *lq_sta)
+{
+ IWL_DEBUG_RATE("we are staying in the same table\n");
+ lq_sta->stay_in_tbl = 1; /* only place this gets set */
+ if (is_legacy) {
+ lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
+ lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
+ } else {
+ lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
+ lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
+ }
+ lq_sta->table_count = 0;
+ lq_sta->total_failed = 0;
+ lq_sta->total_success = 0;
+}
+
+/*
+ * Find correct throughput table for given mode of modulation
+ */
+static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
+ struct iwl_scale_tbl_info *tbl)
+{
+ if (is_legacy(tbl->lq_type)) {
+ if (!is_a_band(tbl->lq_type))
+ tbl->expected_tpt = expected_tpt_G;
+ else
+ tbl->expected_tpt = expected_tpt_A;
+ } else if (is_siso(tbl->lq_type)) {
+ if (tbl->is_fat && !lq_sta->is_dup)
+ if (tbl->is_SGI)
+ tbl->expected_tpt = expected_tpt_siso40MHzSGI;
+ else
+ tbl->expected_tpt = expected_tpt_siso40MHz;
+ else if (tbl->is_SGI)
+ tbl->expected_tpt = expected_tpt_siso20MHzSGI;
+ else
+ tbl->expected_tpt = expected_tpt_siso20MHz;
+
+ } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
+ if (tbl->is_fat && !lq_sta->is_dup)
+ if (tbl->is_SGI)
+ tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
+ else
+ tbl->expected_tpt = expected_tpt_mimo40MHz;
+ else if (tbl->is_SGI)
+ tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
+ else
+ tbl->expected_tpt = expected_tpt_mimo20MHz;
+ } else
+ tbl->expected_tpt = expected_tpt_G;
+}
+
+/*
+ * Find starting rate for new "search" high-throughput mode of modulation.
+ * Goal is to find lowest expected rate (under perfect conditions) that is
+ * above the current measured throughput of "active" mode, to give new mode
+ * a fair chance to prove itself without too many challenges.
+ *
+ * This gets called when transitioning to more aggressive modulation
+ * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
+ * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
+ * to decrease to match "active" throughput. When moving from MIMO to SISO,
+ * bit rate will typically need to increase, but not if performance was bad.
+ */
+static s32 rs_get_best_rate(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct iwl_scale_tbl_info *tbl, /* "search" */
+ u16 rate_mask, s8 index)
+{
+ /* "active" values */
+ struct iwl_scale_tbl_info *active_tbl =
+ &(lq_sta->lq_info[lq_sta->active_tbl]);
+ s32 active_sr = active_tbl->win[index].success_ratio;
+ s32 active_tpt = active_tbl->expected_tpt[index];
+
+ /* expected "search" throughput */
+ s32 *tpt_tbl = tbl->expected_tpt;
+
+ s32 new_rate, high, low, start_hi;
+ u16 high_low;
+ s8 rate = index;
+
+ new_rate = high = low = start_hi = IWL_RATE_INVALID;
+
+ for (; ;) {
+ high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
+ tbl->lq_type);
+
+ low = high_low & 0xff;
+ high = (high_low >> 8) & 0xff;
+
+ /*
+ * Lower the "search" bit rate, to give new "search" mode
+ * approximately the same throughput as "active" if:
+ *
+ * 1) "Active" mode has been working modestly well (but not
+ * great), and expected "search" throughput (under perfect
+ * conditions) at candidate rate is above the actual
+ * measured "active" throughput (but less than expected
+ * "active" throughput under perfect conditions).
+ * OR
+ * 2) "Active" mode has been working perfectly or very well
+ * and expected "search" throughput (under perfect
+ * conditions) at candidate rate is above expected
+ * "active" throughput (under perfect conditions).
+ */
+ if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
+ ((active_sr > IWL_RATE_DECREASE_TH) &&
+ (active_sr <= IWL_RATE_HIGH_TH) &&
+ (tpt_tbl[rate] <= active_tpt))) ||
+ ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
+ (tpt_tbl[rate] > active_tpt))) {
+
+ /* (2nd or later pass)
+ * If we've already tried to raise the rate, and are
+ * now trying to lower it, use the higher rate. */
+ if (start_hi != IWL_RATE_INVALID) {
+ new_rate = start_hi;
+ break;
+ }
+
+ new_rate = rate;
+
+ /* Loop again with lower rate */
+ if (low != IWL_RATE_INVALID)
+ rate = low;
+
+ /* Lower rate not available, use the original */
+ else
+ break;
+
+ /* Else try to raise the "search" rate to match "active" */
+ } else {
+ /* (2nd or later pass)
+ * If we've already tried to lower the rate, and are
+ * now trying to raise it, use the lower rate. */
+ if (new_rate != IWL_RATE_INVALID)
+ break;
+
+ /* Loop again with higher rate */
+ else if (high != IWL_RATE_INVALID) {
+ start_hi = high;
+ rate = high;
+
+ /* Higher rate not available, use the original */
+ } else {
+ break;
+ }
+ }
+ }
+
+ return new_rate;
+}
+
+/*
+ * Set up search table for MIMO
+ */
+static int rs_switch_to_mimo2(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta,
+ struct iwl_scale_tbl_info *tbl, int index)
+{
+ u16 rate_mask;
+ s32 rate;
+ s8 is_green = lq_sta->is_green;
+
+ if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+ !sta->ht_info.ht_supported)
+ return -1;
+
+ if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
+ return -1;
+
+ /* Need both Tx chains/antennas to support MIMO */
+ if (priv->hw_params.tx_chains_num < 2)
+ return -1;
+
+ IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n");
+
+ tbl->lq_type = LQ_MIMO2;
+ tbl->is_dup = lq_sta->is_dup;
+ tbl->action = 0;
+ rate_mask = lq_sta->active_mimo2_rate;
+
+ if (priv->current_ht_config.supported_chan_width
+ == IWL_CHANNEL_WIDTH_40MHZ)
+ tbl->is_fat = 1;
+ else
+ tbl->is_fat = 0;
+
+ /* FIXME: - don't toggle SGI here
+ if (tbl->is_fat) {
+ if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+ tbl->is_SGI = 1;
+ else
+ tbl->is_SGI = 0;
+ } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+ tbl->is_SGI = 1;
+ else
+ tbl->is_SGI = 0;
+ */
+
+ rs_set_expected_tpt_table(lq_sta, tbl);
+
+ rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+ IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+
+ if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+ IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n",
+ rate, rate_mask);
+ return -1;
+ }
+ tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
+
+ IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+ tbl->current_rate, is_green);
+ return 0;
+}
+
+/*
+ * Set up search table for SISO
+ */
+static int rs_switch_to_siso(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta,
+ struct iwl_scale_tbl_info *tbl, int index)
+{
+ u16 rate_mask;
+ u8 is_green = lq_sta->is_green;
+ s32 rate;
+
+ if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+ !sta->ht_info.ht_supported)
+ return -1;
+
+ IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
+
+ tbl->is_dup = lq_sta->is_dup;
+ tbl->lq_type = LQ_SISO;
+ tbl->action = 0;
+ rate_mask = lq_sta->active_siso_rate;
+
+ if (priv->current_ht_config.supported_chan_width
+ == IWL_CHANNEL_WIDTH_40MHZ)
+ tbl->is_fat = 1;
+ else
+ tbl->is_fat = 0;
+
+ /* FIXME: - don't toggle SGI here
+ if (tbl->is_fat) {
+ if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+ tbl->is_SGI = 1;
+ else
+ tbl->is_SGI = 0;
+ } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+ tbl->is_SGI = 1;
+ else
+ tbl->is_SGI = 0;
+ */
+
+ if (is_green)
+ tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
+
+ rs_set_expected_tpt_table(lq_sta, tbl);
+ rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+ IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
+ if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+ IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n",
+ rate, rate_mask);
+ return -1;
+ }
+ tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green);
+ IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
+ tbl->current_rate, is_green);
+ return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from legacy
+ */
+static int rs_move_legacy_other(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta,
+ int index)
+{
+ struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct iwl_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+ (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+ u8 start_action = tbl->action;
+ u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ int ret = 0;
+
+ for (; ;) {
+ switch (tbl->action) {
+ case IWL_LEGACY_SWITCH_ANTENNA:
+ IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n");
+
+ lq_sta->action_counter++;
+
+ /* Don't change antenna if success has been great */
+ if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+ break;
+
+ /* Set up search table to try other antenna */
+ memcpy(search_tbl, tbl, sz);
+
+ if (rs_toggle_antenna(valid_tx_ant,
+ &search_tbl->current_rate, search_tbl)) {
+ lq_sta->search_better_tbl = 1;
+ goto out;
+ }
+ break;
+ case IWL_LEGACY_SWITCH_SISO:
+ IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n");
+
+ /* Set up search table to try SISO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+ ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret) {
+ lq_sta->search_better_tbl = 1;
+ lq_sta->action_counter = 0;
+ goto out;
+ }
+
+ break;
+ case IWL_LEGACY_SWITCH_MIMO2:
+ IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n");
+
+ /* Set up search table to try MIMO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+ search_tbl->ant_type = ANT_AB;/*FIXME:RS*/
+ /*FIXME:RS:need to check ant validity*/
+ ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret) {
+ lq_sta->search_better_tbl = 1;
+ lq_sta->action_counter = 0;
+ goto out;
+ }
+ break;
+ }
+ tbl->action++;
+ if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
+ tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
+
+ if (tbl->action == start_action)
+ break;
+
+ }
+ return 0;
+
+ out:
+ tbl->action++;
+ if (tbl->action > IWL_LEGACY_SWITCH_MIMO2)
+ tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
+ return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from SISO
+ */
+static int rs_move_siso_to_other(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta, int index)
+{
+ u8 is_green = lq_sta->is_green;
+ struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct iwl_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+ (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+ u8 start_action = tbl->action;
+ u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ int ret;
+
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IWL_SISO_SWITCH_ANTENNA:
+ IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
+ if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+ break;
+
+ memcpy(search_tbl, tbl, sz);
+ if (rs_toggle_antenna(valid_tx_ant,
+ &search_tbl->current_rate, search_tbl)) {
+ lq_sta->search_better_tbl = 1;
+ goto out;
+ }
+ break;
+ case IWL_SISO_SWITCH_MIMO2:
+ IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n");
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+ search_tbl->ant_type = ANT_AB; /*FIXME:RS*/
+ ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret) {
+ lq_sta->search_better_tbl = 1;
+ goto out;
+ }
+ break;
+ case IWL_SISO_SWITCH_GI:
+ if (!tbl->is_fat &&
+ !(priv->current_ht_config.sgf &
+ HT_SHORT_GI_20MHZ))
+ break;
+ if (tbl->is_fat &&
+ !(priv->current_ht_config.sgf &
+ HT_SHORT_GI_40MHZ))
+ break;
+
+ IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
+
+ memcpy(search_tbl, tbl, sz);
+ if (is_green) {
+ if (!tbl->is_SGI)
+ break;
+ else
+ IWL_ERROR("SGI was set in GF+SISO\n");
+ }
+ search_tbl->is_SGI = !tbl->is_SGI;
+ rs_set_expected_tpt_table(lq_sta, search_tbl);
+ if (tbl->is_SGI) {
+ s32 tpt = lq_sta->last_tpt / 100;
+ if (tpt >= search_tbl->expected_tpt[index])
+ break;
+ }
+ search_tbl->current_rate = rate_n_flags_from_tbl(
+ search_tbl, index, is_green);
+ lq_sta->search_better_tbl = 1;
+ goto out;
+ }
+ tbl->action++;
+ if (tbl->action > IWL_SISO_SWITCH_GI)
+ tbl->action = IWL_SISO_SWITCH_ANTENNA;
+
+ if (tbl->action == start_action)
+ break;
+ }
+ return 0;
+
+ out:
+ tbl->action++;
+ if (tbl->action > IWL_SISO_SWITCH_GI)
+ tbl->action = IWL_SISO_SWITCH_ANTENNA;
+ return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO
+ */
+static int rs_move_mimo_to_other(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta, int index)
+{
+ s8 is_green = lq_sta->is_green;
+ struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct iwl_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+ (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+ u8 start_action = tbl->action;
+ /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/
+ int ret;
+
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IWL_MIMO_SWITCH_ANTENNA_A:
+ case IWL_MIMO_SWITCH_ANTENNA_B:
+ IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n");
+
+ /* Set up new search table for SISO */
+ memcpy(search_tbl, tbl, sz);
+
+ /*FIXME:RS:need to check ant validity + C*/
+ if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A)
+ search_tbl->ant_type = ANT_A;
+ else
+ search_tbl->ant_type = ANT_B;
+
+ ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret) {
+ lq_sta->search_better_tbl = 1;
+ goto out;
+ }
+ break;
+
+ case IWL_MIMO_SWITCH_GI:
+ if (!tbl->is_fat &&
+ !(priv->current_ht_config.sgf &
+ HT_SHORT_GI_20MHZ))
+ break;
+ if (tbl->is_fat &&
+ !(priv->current_ht_config.sgf &
+ HT_SHORT_GI_40MHZ))
+ break;
+
+ IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
+
+ /* Set up new search table for MIMO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = !tbl->is_SGI;
+ rs_set_expected_tpt_table(lq_sta, search_tbl);
+ /*
+ * If active table already uses the fastest possible
+ * modulation (dual stream with short guard interval),
+ * and it's working well, there's no need to look
+ * for a better type of modulation!
+ */
+ if (tbl->is_SGI) {
+ s32 tpt = lq_sta->last_tpt / 100;
+ if (tpt >= search_tbl->expected_tpt[index])
+ break;
+ }
+ search_tbl->current_rate = rate_n_flags_from_tbl(
+ search_tbl, index, is_green);
+ lq_sta->search_better_tbl = 1;
+ goto out;
+
+ }
+ tbl->action++;
+ if (tbl->action > IWL_MIMO_SWITCH_GI)
+ tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
+
+ if (tbl->action == start_action)
+ break;
+ }
+
+ return 0;
+ out:
+ tbl->action++;
+ if (tbl->action > IWL_MIMO_SWITCH_GI)
+ tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
+ return 0;
+
+}
+
+/*
+ * Check whether we should continue using same modulation mode, or
+ * begin search for a new mode, based on:
+ * 1) # tx successes or failures while using this mode
+ * 2) # times calling this function
+ * 3) elapsed time in this mode (not used, for now)
+ */
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
+{
+ struct iwl_scale_tbl_info *tbl;
+ int i;
+ int active_tbl;
+ int flush_interval_passed = 0;
+ struct iwl_priv *priv;
+
+ priv = lq_sta->drv;
+ active_tbl = lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ /* If we've been disallowing search, see if we should now allow it */
+ if (lq_sta->stay_in_tbl) {
+
+ /* Elapsed time using current modulation mode */
+ if (lq_sta->flush_timer)
+ flush_interval_passed =
+ time_after(jiffies,
+ (unsigned long)(lq_sta->flush_timer +
+ IWL_RATE_SCALE_FLUSH_INTVL));
+
+ /*
+ * Check if we should allow search for new modulation mode.
+ * If many frames have failed or succeeded, or we've used
+ * this same modulation for a long time, allow search, and
+ * reset history stats that keep track of whether we should
+ * allow a new search. Also (below) reset all bitmaps and
+ * stats in active history.
+ */
+ if ((lq_sta->total_failed > lq_sta->max_failure_limit) ||
+ (lq_sta->total_success > lq_sta->max_success_limit) ||
+ ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
+ && (flush_interval_passed))) {
+ IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:",
+ lq_sta->total_failed,
+ lq_sta->total_success,
+ flush_interval_passed);
+
+ /* Allow search for new mode */
+ lq_sta->stay_in_tbl = 0; /* only place reset */
+ lq_sta->total_failed = 0;
+ lq_sta->total_success = 0;
+ lq_sta->flush_timer = 0;
+
+ /*
+ * Else if we've used this modulation mode enough repetitions
+ * (regardless of elapsed time or success/failure), reset
+ * history bitmaps and rate-specific stats for all rates in
+ * active table.
+ */
+ } else {
+ lq_sta->table_count++;
+ if (lq_sta->table_count >=
+ lq_sta->table_count_limit) {
+ lq_sta->table_count = 0;
+
+ IWL_DEBUG_RATE("LQ: stay in table clear win\n");
+ for (i = 0; i < IWL_RATE_COUNT; i++)
+ rs_rate_scale_clear_window(
+ &(tbl->win[i]));
+ }
+ }
+
+ /* If transitioning to allow "search", reset all history
+ * bitmaps and stats in active table (this will become the new
+ * "search" table). */
+ if (!lq_sta->stay_in_tbl) {
+ for (i = 0; i < IWL_RATE_COUNT; i++)
+ rs_rate_scale_clear_window(&(tbl->win[i]));
+ }
+ }
+}
+
+/*
+ * Do rate scaling and search for new modulation mode.
+ */
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+ struct net_device *dev,
+ struct ieee80211_hdr *hdr,
+ struct sta_info *sta)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw *hw = local_to_hw(local);
+ struct ieee80211_conf *conf = &hw->conf;
+ int low = IWL_RATE_INVALID;
+ int high = IWL_RATE_INVALID;
+ int index;
+ int i;
+ struct iwl_rate_scale_data *window = NULL;
+ int current_tpt = IWL_INVALID_VALUE;
+ int low_tpt = IWL_INVALID_VALUE;
+ int high_tpt = IWL_INVALID_VALUE;
+ u32 fail_count;
+ s8 scale_action = 0;
+ __le16 fc;
+ u16 rate_mask;
+ u8 update_lq = 0;
+ struct iwl_lq_sta *lq_sta;
+ struct iwl_scale_tbl_info *tbl, *tbl1;
+ u16 rate_scale_index_msk = 0;
+ u32 rate;
+ u8 is_green = 0;
+ u8 active_tbl = 0;
+ u8 done_search = 0;
+ u16 high_low;
+ s32 sr;
+ u8 tid = MAX_TID_COUNT;
+
+ IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
+
+ fc = hdr->frame_control;
+ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
+ /* Send management frames and broadcast/multicast data using
+ * lowest rate. */
+ /* TODO: this could probably be improved.. */
+ return;
+ }
+
+ if (!sta || !sta->rate_ctrl_priv)
+ return;
+
+ lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+
+ tid = rs_tl_add_packet(lq_sta, hdr);
+
+ /*
+ * Select rate-scale / modulation-mode table to work with in
+ * the rest of this function: "search" if searching for better
+ * modulation mode, or "active" if doing rate scaling within a mode.
+ */
+ if (!lq_sta->search_better_tbl)
+ active_tbl = lq_sta->active_tbl;
+ else
+ active_tbl = 1 - lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+ is_green = lq_sta->is_green;
+
+ /* current tx rate */
+ index = sta->last_txrate_idx;
+
+ IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
+ tbl->lq_type);
+
+ /* rates available for this association, and for modulation mode */
+ rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
+
+ IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
+
+ /* mask with station rate restriction */
+ if (is_legacy(tbl->lq_type)) {
+ if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ /* supp_rates has no CCK bits in A mode */
+ rate_scale_index_msk = (u16) (rate_mask &
+ (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+ else
+ rate_scale_index_msk = (u16) (rate_mask &
+ lq_sta->supp_rates);
+
+ } else
+ rate_scale_index_msk = rate_mask;
+
+ if (!rate_scale_index_msk)
+ rate_scale_index_msk = rate_mask;
+
+ if (!((1 << index) & rate_scale_index_msk)) {
+ IWL_ERROR("Current Rate is not valid\n");
+ return;
+ }
+
+ /* Get expected throughput table and history window for current rate */
+ if (!tbl->expected_tpt) {
+ IWL_ERROR("tbl->expected_tpt is NULL\n");
+ return;
+ }
+
+ window = &(tbl->win[index]);
+
+ /*
+ * If there is not enough history to calculate actual average
+ * throughput, keep analyzing results of more tx frames, without
+ * changing rate or mode (bypass most of the rest of this function).
+ * Set up new rate table in uCode only if old rate is not supported
+ * in current association (use new rate found above).
+ */
+ fail_count = window->counter - window->success_counter;
+ if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
+ (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
+ IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
+ "for index %d\n",
+ window->success_counter, window->counter, index);
+
+ /* Can't calculate this yet; not enough history */
+ window->average_tpt = IWL_INVALID_VALUE;
+
+ /* Should we stay with this modulation mode,
+ * or search for a new one? */
+ rs_stay_in_table(lq_sta);
+
+ goto out;
+
+ /* Else we have enough samples; calculate estimate of
+ * actual average throughput */
+ } else {
+ /*FIXME:RS remove this else if we don't get this error*/
+ if (window->average_tpt != ((window->success_ratio *
+ tbl->expected_tpt[index] + 64) / 128)) {
+ IWL_ERROR("expected_tpt should have been calculated"
+ " by now\n");
+ window->average_tpt = ((window->success_ratio *
+ tbl->expected_tpt[index] + 64) / 128);
+ }
+ }
+
+ /* If we are searching for better modulation mode, check success. */
+ if (lq_sta->search_better_tbl) {
+
+ /* If good success, continue using the "search" mode;
+ * no need to send new link quality command, since we're
+ * continuing to use the setup that we've been trying. */
+ if (window->average_tpt > lq_sta->last_tpt) {
+
+ IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ window->success_ratio,
+ window->average_tpt,
+ lq_sta->last_tpt);
+
+ if (!is_legacy(tbl->lq_type))
+ lq_sta->enable_counter = 1;
+
+ /* Swap tables; "search" becomes "active" */
+ lq_sta->active_tbl = active_tbl;
+ current_tpt = window->average_tpt;
+
+ /* Else poor success; go back to mode in "active" table */
+ } else {
+
+ IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ window->success_ratio,
+ window->average_tpt,
+ lq_sta->last_tpt);
+
+ /* Nullify "search" table */
+ tbl->lq_type = LQ_NONE;
+
+ /* Revert to "active" table */
+ active_tbl = lq_sta->active_tbl;
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ /* Revert to "active" rate and throughput info */
+ index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+ current_tpt = lq_sta->last_tpt;
+
+ /* Need to set up a new rate table in uCode */
+ update_lq = 1;
+ }
+
+ /* Either way, we've made a decision; modulation mode
+ * search is done, allow rate adjustment next time. */
+ lq_sta->search_better_tbl = 0;
+ done_search = 1; /* Don't switch modes below! */
+ goto lq_update;
+ }
+
+ /* (Else) not in search of better modulation mode, try for better
+ * starting rate, while staying in this mode. */
+ high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
+ tbl->lq_type);
+ low = high_low & 0xff;
+ high = (high_low >> 8) & 0xff;
+
+ sr = window->success_ratio;
+
+ /* Collect measured throughputs for current and adjacent rates */
+ current_tpt = window->average_tpt;
+ if (low != IWL_RATE_INVALID)
+ low_tpt = tbl->win[low].average_tpt;
+ if (high != IWL_RATE_INVALID)
+ high_tpt = tbl->win[high].average_tpt;
+
+ scale_action = 0;
+
+ /* Too many failures, decrease rate */
+ if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
+ IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
+ scale_action = -1;
+
+ /* No throughput measured yet for adjacent rates; try increase. */
+ } else if ((low_tpt == IWL_INVALID_VALUE) &&
+ (high_tpt == IWL_INVALID_VALUE)) {
+
+ if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
+ scale_action = 1;
+ else if (low != IWL_RATE_INVALID)
+ scale_action = -1;
+ }
+
+ /* Both adjacent throughputs are measured, but neither one has better
+ * throughput; we're using the best rate, don't change it! */
+ else if ((low_tpt != IWL_INVALID_VALUE) &&
+ (high_tpt != IWL_INVALID_VALUE) &&
+ (low_tpt < current_tpt) &&
+ (high_tpt < current_tpt))
+ scale_action = 0;
+
+ /* At least one adjacent rate's throughput is measured,
+ * and may have better performance. */
+ else {
+ /* Higher adjacent rate's throughput is measured */
+ if (high_tpt != IWL_INVALID_VALUE) {
+ /* Higher rate has better throughput */
+ if (high_tpt > current_tpt &&
+ sr >= IWL_RATE_INCREASE_TH) {
+ scale_action = 1;
+ } else {
+ IWL_DEBUG_RATE
+ ("decrease rate because of high tpt\n");
+ scale_action = -1;
+ }
+
+ /* Lower adjacent rate's throughput is measured */
+ } else if (low_tpt != IWL_INVALID_VALUE) {
+ /* Lower rate has better throughput */
+ if (low_tpt > current_tpt) {
+ IWL_DEBUG_RATE
+ ("decrease rate because of low tpt\n");
+ scale_action = -1;
+ } else if (sr >= IWL_RATE_INCREASE_TH) {
+ scale_action = 1;
+ }
+ }
+ }
+
+ /* Sanity check; asked for decrease, but success rate or throughput
+ * has been good at old rate. Don't change it. */
+ if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
+ ((sr > IWL_RATE_HIGH_TH) ||
+ (current_tpt > (100 * tbl->expected_tpt[low]))))
+ scale_action = 0;
+
+ switch (scale_action) {
+ case -1:
+ /* Decrease starting rate, update uCode's rate table */
+ if (low != IWL_RATE_INVALID) {
+ update_lq = 1;
+ index = low;
+ }
+ break;
+ case 1:
+ /* Increase starting rate, update uCode's rate table */
+ if (high != IWL_RATE_INVALID) {
+ update_lq = 1;
+ index = high;
+ }
+
+ break;
+ case 0:
+ /* No change */
+ default:
+ break;
+ }
+
+ IWL_DEBUG_RATE("choose rate scale index %d action %d low %d "
+ "high %d type %d\n",
+ index, scale_action, low, high, tbl->lq_type);
+
+lq_update:
+ /* Replace uCode's rate table for the destination station. */
+ if (update_lq) {
+ rate = rate_n_flags_from_tbl(tbl, index, is_green);
+ rs_fill_link_cmd(priv, lq_sta, rate);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ }
+
+ /* Should we stay with this modulation mode, or search for a new one? */
+ rs_stay_in_table(lq_sta);
+
+ /*
+ * Search for new modulation mode if we're:
+ * 1) Not changing rates right now
+ * 2) Not just finishing up a search
+ * 3) Allowing a new search
+ */
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
+ /* Save current throughput to compare with "search" throughput*/
+ lq_sta->last_tpt = current_tpt;
+
+ /* Select a new "search" modulation mode to try.
+ * If one is found, set up the new "search" table. */
+ if (is_legacy(tbl->lq_type))
+ rs_move_legacy_other(priv, lq_sta, conf, sta, index);
+ else if (is_siso(tbl->lq_type))
+ rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
+ else
+ rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
+
+ /* If new "search" mode was selected, set up in uCode table */
+ if (lq_sta->search_better_tbl) {
+ /* Access the "search" table, clear its history. */
+ tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ for (i = 0; i < IWL_RATE_COUNT; i++)
+ rs_rate_scale_clear_window(&(tbl->win[i]));
+
+ /* Use new "search" start rate */
+ index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+
+ IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n",
+ tbl->current_rate, index);
+ rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ }
+
+ /* If the "active" (non-search) mode was legacy,
+ * and we've tried switching antennas,
+ * but we haven't been able to try HT modes (not available),
+ * stay with best antenna legacy modulation for a while
+ * before next round of mode comparisons. */
+ tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ if (is_legacy(tbl1->lq_type) &&
+ (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) &&
+ (lq_sta->action_counter >= 1)) {
+ lq_sta->action_counter = 0;
+ IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
+ rs_set_stay_in_table(priv, 1, lq_sta);
+ }
+
+ /* If we're in an HT mode, and all 3 mode switch actions
+ * have been tried and compared, stay in this best modulation
+ * mode for a while before next round of mode comparisons. */
+ if (lq_sta->enable_counter &&
+ (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
+ if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
+ (lq_sta->tx_agg_tid_en & (1 << tid)) &&
+ (tid != MAX_TID_COUNT)) {
+ IWL_DEBUG_RATE("try to aggregate tid %d\n", tid);
+ rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
+ }
+ lq_sta->action_counter = 0;
+ rs_set_stay_in_table(priv, 0, lq_sta);
+ }
+
+ /*
+ * Else, don't search for a new modulation mode.
+ * Put new timestamp in stay-in-modulation-mode flush timer if:
+ * 1) Not changing rates right now
+ * 2) Not just finishing up a search
+ * 3) flush timer is empty
+ */
+ } else {
+ if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
+ lq_sta->flush_timer = jiffies;
+ }
+
+out:
+ tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green);
+ i = index;
+ sta->last_txrate_idx = i;
+
+ /* sta->txrate_idx is an index to A mode rates which start
+ * at IWL_FIRST_OFDM_RATE
+ */
+ if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ sta->txrate_idx = i - IWL_FIRST_OFDM_RATE;
+ else
+ sta->txrate_idx = i;
+
+ return;
+}
+
+
+static void rs_initialize_lq(struct iwl_priv *priv,
+ struct ieee80211_conf *conf,
+ struct sta_info *sta)
+{
+ struct iwl_lq_sta *lq_sta;
+ struct iwl_scale_tbl_info *tbl;
+ int rate_idx;
+ int i;
+ u32 rate;
+ u8 use_green = rs_use_green(priv, conf);
+ u8 active_tbl = 0;
+ u8 valid_tx_ant;
+
+ if (!sta || !sta->rate_ctrl_priv)
+ goto out;
+
+ lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+ i = sta->last_txrate_idx;
+
+ if ((lq_sta->lq.sta_id == 0xff) &&
+ (priv->iw_mode == IEEE80211_IF_TYPE_IBSS))
+ goto out;
+
+ valid_tx_ant = priv->hw_params.valid_tx_ant;
+
+ if (!lq_sta->search_better_tbl)
+ active_tbl = lq_sta->active_tbl;
+ else
+ active_tbl = 1 - lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ if ((i < 0) || (i >= IWL_RATE_COUNT))
+ i = 0;
+
+ /* FIXME:RS: This is also wrong in 4965 */
+ rate = iwl_rates[i].plcp;
+ rate |= RATE_MCS_ANT_B_MSK;
+ rate &= ~RATE_MCS_ANT_A_MSK;
+
+ if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
+ rate |= RATE_MCS_CCK_MSK;
+
+ tbl->ant_type = ANT_B;
+ rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
+ if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
+ rs_toggle_antenna(valid_tx_ant, &rate, tbl);
+
+ rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green);
+ tbl->current_rate = rate;
+ rs_set_expected_tpt_table(lq_sta, tbl);
+ rs_fill_link_cmd(NULL, lq_sta, rate);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ out:
+ return;
+}
+
+static void rs_get_rate(void *priv_rate, struct net_device *dev,
+ struct ieee80211_supported_band *sband,
+ struct sk_buff *skb,
+ struct rate_selection *sel)
+{
+
+ int i;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct sta_info *sta;
+ __le16 fc;
+ struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+ struct iwl_lq_sta *lq_sta;
+
+ IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
+
+ rcu_read_lock();
+
+ sta = sta_info_get(local, hdr->addr1);
+
+ /* Send management frames and broadcast/multicast data using lowest
+ * rate. */
+ fc = hdr->frame_control;
+ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
+ !sta || !sta->rate_ctrl_priv) {
+ sel->rate_idx = rate_lowest_index(local, sband, sta);
+ goto out;
+ }
+
+ lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+ i = sta->last_txrate_idx;
+
+ if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+ !lq_sta->ibss_sta_added) {
+ u8 sta_id = iwl_find_station(priv, hdr->addr1);
+ DECLARE_MAC_BUF(mac);
+
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_RATE("LQ: ADD station %s\n",
+ print_mac(mac, hdr->addr1));
+ sta_id = iwl_add_station_flags(priv, hdr->addr1,
+ 0, CMD_ASYNC, NULL);
+ }
+ if ((sta_id != IWL_INVALID_STATION)) {
+ lq_sta->lq.sta_id = sta_id;
+ lq_sta->lq.rs_table[0].rate_n_flags = 0;
+ lq_sta->ibss_sta_added = 1;
+ rs_initialize_lq(priv, conf, sta);
+ }
+ }
+
+ if ((i < 0) || (i > IWL_RATE_COUNT)) {
+ sel->rate_idx = rate_lowest_index(local, sband, sta);
+ goto out;
+ }
+
+ if (sband->band == IEEE80211_BAND_5GHZ)
+ i -= IWL_FIRST_OFDM_RATE;
+ sel->rate_idx = i;
+out:
+ rcu_read_unlock();
+}
+
+static void *rs_alloc_sta(void *priv_rate, gfp_t gfp)
+{
+ struct iwl_lq_sta *lq_sta;
+ struct iwl_priv *priv;
+ int i, j;
+
+ priv = (struct iwl_priv *)priv_rate;
+ IWL_DEBUG_RATE("create station rate scale window\n");
+
+ lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
+
+ if (lq_sta == NULL)
+ return NULL;
+ lq_sta->lq.sta_id = 0xff;
+
+
+ for (j = 0; j < LQ_SIZE; j++)
+ for (i = 0; i < IWL_RATE_COUNT; i++)
+ rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+ return lq_sta;
+}
+
+static void rs_rate_init(void *priv_rate, void *priv_sta,
+ struct ieee80211_local *local,
+ struct sta_info *sta)
+{
+ int i, j;
+ struct ieee80211_conf *conf = &local->hw.conf;
+ struct ieee80211_supported_band *sband;
+ struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
+ struct iwl_lq_sta *lq_sta = priv_sta;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+ lq_sta->flush_timer = 0;
+ lq_sta->supp_rates = sta->supp_rates[sband->band];
+ sta->txrate_idx = 3;
+ for (j = 0; j < LQ_SIZE; j++)
+ for (i = 0; i < IWL_RATE_COUNT; i++)
+ rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+ IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n");
+ /* TODO: what is a good starting rate for STA? About middle? Maybe not
+ * the lowest or the highest rate.. Could consider using RSSI from
+ * previous packets? Need to have IEEE 802.1X auth succeed immediately
+ * after assoc.. */
+
+ lq_sta->ibss_sta_added = 0;
+ if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+ u8 sta_id = iwl_find_station(priv, sta->addr);
+ DECLARE_MAC_BUF(mac);
+
+ /* for IBSS the call are from tasklet */
+ IWL_DEBUG_RATE("LQ: ADD station %s\n",
+ print_mac(mac, sta->addr));
+
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_RATE("LQ: ADD station %s\n",
+ print_mac(mac, sta->addr));
+ sta_id = iwl_add_station_flags(priv, sta->addr,
+ 0, CMD_ASYNC, NULL);
+ }
+ if ((sta_id != IWL_INVALID_STATION)) {
+ lq_sta->lq.sta_id = sta_id;
+ lq_sta->lq.rs_table[0].rate_n_flags = 0;
+ }
+ /* FIXME: this is w/a remove it later */
+ priv->assoc_station_added = 1;
+ }
+
+ /* Find highest tx rate supported by hardware and destination station */
+ for (i = 0; i < sband->n_bitrates; i++)
+ if (sta->supp_rates[sband->band] & BIT(i))
+ sta->txrate_idx = i;
+
+ sta->last_txrate_idx = sta->txrate_idx;
+ /* WTF is with this bogus comment? A doesn't have cck rates */
+ /* For MODE_IEEE80211A, cck rates are at end of rate table */
+ if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
+ sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+
+ lq_sta->is_dup = 0;
+ lq_sta->is_green = rs_use_green(priv, conf);
+ lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
+ lq_sta->active_rate_basic = priv->active_rate_basic;
+ lq_sta->band = priv->band;
+ /*
+ * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
+ * supp_rates[] does not; shift to convert format, force 9 MBits off.
+ */
+ lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1;
+ lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1;
+ lq_sta->active_siso_rate &= ~((u16)0x2);
+ lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
+
+ /* Same here */
+ lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1;
+ lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1;
+ lq_sta->active_mimo2_rate &= ~((u16)0x2);
+ lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
+
+ lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1;
+ lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1;
+ lq_sta->active_mimo3_rate &= ~((u16)0x2);
+ lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
+
+ IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
+ lq_sta->active_siso_rate,
+ lq_sta->active_mimo2_rate,
+ lq_sta->active_mimo3_rate);
+
+ /* These values will be overriden later */
+ lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
+ lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
+
+ /* as default allow aggregation for all tids */
+ lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
+ lq_sta->drv = priv;
+
+ rs_initialize_lq(priv, conf, sta);
+}
+
+static void rs_fill_link_cmd(const struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta, u32 new_rate)
+{
+ struct iwl_scale_tbl_info tbl_type;
+ int index = 0;
+ int rate_idx;
+ int repeat_rate = 0;
+ u8 ant_toggle_cnt = 0;
+ u8 use_ht_possible = 1;
+ u8 valid_tx_ant = 0;
+ struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
+
+ /* Override starting rate (index 0) if needed for debug purposes */
+ rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+ /* Interpret new_rate (rate_n_flags) */
+ memset(&tbl_type, 0, sizeof(tbl_type));
+ rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
+ &tbl_type, &rate_idx);
+
+ /* How many times should we repeat the initial rate? */
+ if (is_legacy(tbl_type.lq_type)) {
+ ant_toggle_cnt = 1;
+ repeat_rate = IWL_NUMBER_TRY;
+ } else {
+ repeat_rate = IWL_HT_NUMBER_TRY;
+ }
+
+ lq_cmd->general_params.mimo_delimiter =
+ is_mimo(tbl_type.lq_type) ? 1 : 0;
+
+ /* Fill 1st table entry (index 0) */
+ lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+ if (num_of_ant(tbl_type.ant_type) == 1) {
+ lq_cmd->general_params.single_stream_ant_msk =
+ tbl_type.ant_type;
+ } else if (num_of_ant(tbl_type.ant_type) == 2) {
+ lq_cmd->general_params.dual_stream_ant_msk =
+ tbl_type.ant_type;
+ } /* otherwise we don't modify the existing value */
+
+ index++;
+ repeat_rate--;
+
+ if (priv)
+ valid_tx_ant = priv->hw_params.valid_tx_ant;
+
+ /* Fill rest of rate table */
+ while (index < LINK_QUAL_MAX_RETRY_NUM) {
+ /* Repeat initial/next rate.
+ * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
+ * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
+ while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
+ if (is_legacy(tbl_type.lq_type)) {
+ if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+ ant_toggle_cnt++;
+ else if (priv &&
+ rs_toggle_antenna(valid_tx_ant,
+ &new_rate, &tbl_type))
+ ant_toggle_cnt = 1;
+}
+
+ /* Override next rate if needed for debug purposes */
+ rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+ /* Fill next table entry */
+ lq_cmd->rs_table[index].rate_n_flags =
+ cpu_to_le32(new_rate);
+ repeat_rate--;
+ index++;
+ }
+
+ rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
+ &rate_idx);
+
+ /* Indicate to uCode which entries might be MIMO.
+ * If initial rate was MIMO, this will finally end up
+ * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
+ if (is_mimo(tbl_type.lq_type))
+ lq_cmd->general_params.mimo_delimiter = index;
+
+ /* Get next rate */
+ new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
+ use_ht_possible);
+
+ /* How many times should we repeat the next rate? */
+ if (is_legacy(tbl_type.lq_type)) {
+ if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+ ant_toggle_cnt++;
+ else if (priv &&
+ rs_toggle_antenna(valid_tx_ant,
+ &new_rate, &tbl_type))
+ ant_toggle_cnt = 1;
+
+ repeat_rate = IWL_NUMBER_TRY;
+ } else {
+ repeat_rate = IWL_HT_NUMBER_TRY;
+ }
+
+ /* Don't allow HT rates after next pass.
+ * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
+ use_ht_possible = 0;
+
+ /* Override next rate if needed for debug purposes */
+ rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+ /* Fill next table entry */
+ lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+ index++;
+ repeat_rate--;
+ }
+
+ lq_cmd->agg_params.agg_frame_cnt_limit = 64;
+ lq_cmd->agg_params.agg_dis_start_th = 3;
+ lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
+}
+
+static void *rs_alloc(struct ieee80211_local *local)
+{
+ return local->hw.priv;
+}
+/* rate scale requires free function to be implemented */
+static void rs_free(void *priv_rate)
+{
+ return;
+}
+
+static void rs_clear(void *priv_rate)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_priv *priv = (struct iwl_priv *) priv_rate;
+
+ IWL_DEBUG_RATE("enter\n");
+
+ /* TODO - add rate scale state reset */
+
+ IWL_DEBUG_RATE("leave\n");
+#endif /* CONFIG_IWLWIFI_DEBUG */
+}
+
+static void rs_free_sta(void *priv_rate, void *priv_sta)
+{
+ struct iwl_lq_sta *lq_sta = priv_sta;
+ struct iwl_priv *priv;
+
+ priv = (struct iwl_priv *)priv_rate;
+ IWL_DEBUG_RATE("enter\n");
+ kfree(lq_sta);
+ IWL_DEBUG_RATE("leave\n");
+}
+
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+ u32 *rate_n_flags, int index)
+{
+ struct iwl_priv *priv;
+
+ priv = lq_sta->drv;
+ if (lq_sta->dbg_fixed_rate) {
+ if (index < 12) {
+ *rate_n_flags = lq_sta->dbg_fixed_rate;
+ } else {
+ if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ *rate_n_flags = 0x800D;
+ else
+ *rate_n_flags = 0x820A;
+ }
+ IWL_DEBUG_RATE("Fixed rate ON\n");
+ } else {
+ IWL_DEBUG_RATE("Fixed rate OFF\n");
+ }
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
+ const char __user *user_buf, size_t count, loff_t *ppos)
+{
+ struct iwl_lq_sta *lq_sta = file->private_data;
+ struct iwl_priv *priv;
+ char buf[64];
+ int buf_size;
+ u32 parsed_rate;
+
+ priv = lq_sta->drv;
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ if (sscanf(buf, "%x", &parsed_rate) == 1)
+ lq_sta->dbg_fixed_rate = parsed_rate;
+ else
+ lq_sta->dbg_fixed_rate = 0;
+
+ lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
+ lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
+ lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
+ lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
+
+ IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
+ lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
+
+ if (lq_sta->dbg_fixed_rate) {
+ rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
+ iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
+ }
+
+ return count;
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
+ char __user *user_buf, size_t count, loff_t *ppos)
+{
+ char buff[1024];
+ int desc = 0;
+ int i = 0;
+
+ struct iwl_lq_sta *lq_sta = file->private_data;
+
+ desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
+ desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
+ lq_sta->total_failed, lq_sta->total_success,
+ lq_sta->active_legacy_rate);
+ desc += sprintf(buff+desc, "fixed rate 0x%X\n",
+ lq_sta->dbg_fixed_rate);
+ desc += sprintf(buff+desc, "general:"
+ "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
+ lq_sta->lq.general_params.flags,
+ lq_sta->lq.general_params.mimo_delimiter,
+ lq_sta->lq.general_params.single_stream_ant_msk,
+ lq_sta->lq.general_params.dual_stream_ant_msk);
+
+ desc += sprintf(buff+desc, "agg:"
+ "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
+ le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
+ lq_sta->lq.agg_params.agg_dis_start_th,
+ lq_sta->lq.agg_params.agg_frame_cnt_limit);
+
+ desc += sprintf(buff+desc,
+ "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
+ lq_sta->lq.general_params.start_rate_index[0],
+ lq_sta->lq.general_params.start_rate_index[1],
+ lq_sta->lq.general_params.start_rate_index[2],
+ lq_sta->lq.general_params.start_rate_index[3]);
+
+
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+ desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
+ i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+
+ return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
+ .write = rs_sta_dbgfs_scale_table_write,
+ .read = rs_sta_dbgfs_scale_table_read,
+ .open = open_file_generic,
+};
+static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
+ char __user *user_buf, size_t count, loff_t *ppos)
+{
+ char buff[1024];
+ int desc = 0;
+ int i, j;
+
+ struct iwl_lq_sta *lq_sta = file->private_data;
+ for (i = 0; i < LQ_SIZE; i++) {
+ desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
+ "rate=0x%X\n",
+ lq_sta->active_tbl == i?"*":"x",
+ lq_sta->lq_info[i].lq_type,
+ lq_sta->lq_info[i].is_SGI,
+ lq_sta->lq_info[i].is_fat,
+ lq_sta->lq_info[i].is_dup,
+ lq_sta->lq_info[i].current_rate);
+ for (j = 0; j < IWL_RATE_COUNT; j++) {
+ desc += sprintf(buff+desc,
+ "counter=%d success=%d %%=%d\n",
+ lq_sta->lq_info[i].win[j].counter,
+ lq_sta->lq_info[i].win[j].success_counter,
+ lq_sta->lq_info[i].win[j].success_ratio);
+ }
+ }
+ return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
+ .read = rs_sta_dbgfs_stats_table_read,
+ .open = open_file_generic,
+};
+
+static void rs_add_debugfs(void *priv, void *priv_sta,
+ struct dentry *dir)
+{
+ struct iwl_lq_sta *lq_sta = priv_sta;
+ lq_sta->rs_sta_dbgfs_scale_table_file =
+ debugfs_create_file("rate_scale_table", 0600, dir,
+ lq_sta, &rs_sta_dbgfs_scale_table_ops);
+ lq_sta->rs_sta_dbgfs_stats_table_file =
+ debugfs_create_file("rate_stats_table", 0600, dir,
+ lq_sta, &rs_sta_dbgfs_stats_table_ops);
+ lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
+ debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
+ &lq_sta->tx_agg_tid_en);
+
+}
+
+static void rs_remove_debugfs(void *priv, void *priv_sta)
+{
+ struct iwl_lq_sta *lq_sta = priv_sta;
+ debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
+ debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+ debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
+}
+#endif
+
+static struct rate_control_ops rs_ops = {
+ .module = NULL,
+ .name = RS_NAME,
+ .tx_status = rs_tx_status,
+ .get_rate = rs_get_rate,
+ .rate_init = rs_rate_init,
+ .clear = rs_clear,
+ .alloc = rs_alloc,
+ .free = rs_free,
+ .alloc_sta = rs_alloc_sta,
+ .free_sta = rs_free_sta,
+#ifdef CONFIG_MAC80211_DEBUGFS
+ .add_sta_debugfs = rs_add_debugfs,
+ .remove_sta_debugfs = rs_remove_debugfs,
+#endif
+};
+
+int iwlagn_rate_control_register(void)
+{
+ return ieee80211_rate_control_register(&rs_ops);
+}
+
+void iwlagn_rate_control_unregister(void)
+{
+ ieee80211_rate_control_unregister(&rs_ops);
+}
+