summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn-rxon.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rxon.c642
1 files changed, 642 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
new file mode 100644
index 00000000000..6d140bd5329
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -0,0 +1,642 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include "iwl-dev.h"
+#include "iwl-agn.h"
+#include "iwl-sta.h"
+#include "iwl-core.h"
+#include "iwl-agn-calib.h"
+
+static int iwlagn_disable_bss(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx,
+ struct iwl_rxon_cmd *send)
+{
+ __le32 old_filter = send->filter_flags;
+ int ret;
+
+ send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
+
+ send->filter_flags = old_filter;
+
+ if (ret)
+ IWL_ERR(priv, "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
+
+ return ret;
+}
+
+static int iwlagn_disable_pan(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx,
+ struct iwl_rxon_cmd *send)
+{
+ __le32 old_filter = send->filter_flags;
+ u8 old_dev_type = send->dev_type;
+ int ret;
+
+ send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ send->dev_type = RXON_DEV_TYPE_P2P;
+ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
+
+ send->filter_flags = old_filter;
+ send->dev_type = old_dev_type;
+
+ if (ret)
+ IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
+
+ /* FIXME: WAIT FOR PAN DISABLE */
+ msleep(300);
+
+ return ret;
+}
+
+static void iwlagn_update_qos(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int ret;
+
+ if (!ctx->is_active)
+ return;
+
+ ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+ if (ctx->qos_data.qos_active)
+ ctx->qos_data.def_qos_parm.qos_flags |=
+ QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+ if (ctx->ht.enabled)
+ ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+ IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+ ctx->qos_data.qos_active,
+ ctx->qos_data.def_qos_parm.qos_flags);
+
+ ret = iwl_send_cmd_pdu(priv, ctx->qos_cmd,
+ sizeof(struct iwl_qosparam_cmd),
+ &ctx->qos_data.def_qos_parm);
+ if (ret)
+ IWL_ERR(priv, "Failed to update QoS\n");
+}
+
+static int iwlagn_update_beacon(struct iwl_priv *priv,
+ struct ieee80211_vif *vif)
+{
+ lockdep_assert_held(&priv->mutex);
+
+ dev_kfree_skb(priv->beacon_skb);
+ priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
+ if (!priv->beacon_skb)
+ return -ENOMEM;
+ return iwlagn_send_beacon_cmd(priv);
+}
+
+/**
+ * iwlagn_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data. This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+ /* cast away the const for active_rxon in this function */
+ struct iwl_rxon_cmd *active = (void *)&ctx->active;
+ bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+ bool old_assoc = !!(ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK);
+ int ret;
+
+ lockdep_assert_held(&priv->mutex);
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return -EINVAL;
+
+ if (!iwl_is_alive(priv))
+ return -EBUSY;
+
+ /* This function hardcodes a bunch of dual-mode assumptions */
+ BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+ if (!ctx->is_active)
+ return 0;
+
+ /* always get timestamp with Rx frame */
+ ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+ if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
+ !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
+ ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+ ret = iwl_check_rxon_cmd(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * receive commit_rxon request
+ * abort any previous channel switch if still in process
+ */
+ if (priv->switch_rxon.switch_in_progress &&
+ (priv->switch_rxon.channel != ctx->staging.channel)) {
+ IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+ le16_to_cpu(priv->switch_rxon.channel));
+ iwl_chswitch_done(priv, false);
+ }
+
+ /*
+ * If we don't need to send a full RXON, we can use
+ * iwl_rxon_assoc_cmd which is used to reconfigure filter
+ * and other flags for the current radio configuration.
+ */
+ if (!iwl_full_rxon_required(priv, ctx)) {
+ ret = iwl_send_rxon_assoc(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
+ return ret;
+ }
+
+ memcpy(active, &ctx->staging, sizeof(*active));
+ iwl_print_rx_config_cmd(priv, ctx);
+ return 0;
+ }
+
+ if (priv->cfg->ops->hcmd->set_pan_params) {
+ ret = priv->cfg->ops->hcmd->set_pan_params(priv);
+ if (ret)
+ return ret;
+ }
+
+ iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
+
+ IWL_DEBUG_INFO(priv,
+ "Going to commit RXON\n"
+ " * with%s RXON_FILTER_ASSOC_MSK\n"
+ " * channel = %d\n"
+ " * bssid = %pM\n",
+ (new_assoc ? "" : "out"),
+ le16_to_cpu(ctx->staging.channel),
+ ctx->staging.bssid_addr);
+
+ /*
+ * Always clear associated first, but with the correct config.
+ * This is required as for example station addition for the
+ * AP station must be done after the BSSID is set to correctly
+ * set up filters in the device.
+ */
+ if ((old_assoc && new_assoc) || !new_assoc) {
+ if (ctx->ctxid == IWL_RXON_CTX_BSS)
+ ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+ else
+ ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+ if (ret)
+ return ret;
+
+ memcpy(active, &ctx->staging, sizeof(*active));
+
+ /*
+ * Un-assoc RXON clears the station table and WEP
+ * keys, so we have to restore those afterwards.
+ */
+ iwl_clear_ucode_stations(priv, ctx);
+ iwl_restore_stations(priv, ctx);
+ ret = iwl_restore_default_wep_keys(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ /* RXON timing must be before associated RXON */
+ ret = iwl_send_rxon_timing(priv, ctx);
+ if (ret) {
+ IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+ return ret;
+ }
+
+ if (new_assoc) {
+ /* QoS info may be cleared by previous un-assoc RXON */
+ iwlagn_update_qos(priv, ctx);
+
+ /*
+ * We'll run into this code path when beaconing is
+ * enabled, but then we also need to send the beacon
+ * to the device.
+ */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+ ret = iwlagn_update_beacon(priv, ctx->vif);
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending required beacon (%d)!\n",
+ ret);
+ return ret;
+ }
+ }
+
+ priv->start_calib = 0;
+ /*
+ * Apply the new configuration.
+ *
+ * Associated RXON doesn't clear the station table in uCode,
+ * so we don't need to restore stations etc. after this.
+ */
+ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+ sizeof(struct iwl_rxon_cmd), &ctx->staging);
+ if (ret) {
+ IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+ return ret;
+ }
+ memcpy(active, &ctx->staging, sizeof(*active));
+
+ iwl_reprogram_ap_sta(priv, ctx);
+
+ /* IBSS beacon needs to be sent after setting assoc */
+ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+ if (iwlagn_update_beacon(priv, ctx->vif))
+ IWL_ERR(priv, "Error sending IBSS beacon\n");
+ }
+
+ iwl_print_rx_config_cmd(priv, ctx);
+
+ iwl_init_sensitivity(priv);
+
+ /*
+ * If we issue a new RXON command which required a tune then we must
+ * send a new TXPOWER command or we won't be able to Tx any frames.
+ *
+ * FIXME: which RXON requires a tune? Can we optimise this out in
+ * some cases?
+ */
+ ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+ if (ret) {
+ IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct iwl_rxon_context *ctx;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_channel *channel = conf->channel;
+ const struct iwl_channel_info *ch_info;
+ int ret = 0;
+ bool ht_changed[NUM_IWL_RXON_CTX] = {};
+
+ IWL_DEBUG_MAC80211(priv, "changed %#x", changed);
+
+ mutex_lock(&priv->mutex);
+
+ if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
+ IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+ goto out;
+ }
+
+ if (!iwl_is_ready(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ goto out;
+ }
+
+ if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+ IEEE80211_CONF_CHANGE_CHANNEL)) {
+ /* mac80211 uses static for non-HT which is what we want */
+ priv->current_ht_config.smps = conf->smps_mode;
+
+ /*
+ * Recalculate chain counts.
+ *
+ * If monitor mode is enabled then mac80211 will
+ * set up the SM PS mode to OFF if an HT channel is
+ * configured.
+ */
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ for_each_context(priv, ctx)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ unsigned long flags;
+
+ ch_info = iwl_get_channel_info(priv, channel->band,
+ channel->hw_value);
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ for_each_context(priv, ctx) {
+ /* Configure HT40 channels */
+ if (ctx->ht.enabled != conf_is_ht(conf)) {
+ ctx->ht.enabled = conf_is_ht(conf);
+ ht_changed[ctx->ctxid] = true;
+ }
+
+ if (ctx->ht.enabled) {
+ if (conf_is_ht40_minus(conf)) {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ ctx->ht.is_40mhz = true;
+ } else if (conf_is_ht40_plus(conf)) {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+ ctx->ht.is_40mhz = true;
+ } else {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ ctx->ht.is_40mhz = false;
+ }
+ } else
+ ctx->ht.is_40mhz = false;
+
+ /*
+ * Default to no protection. Protection mode will
+ * later be set from BSS config in iwl_ht_conf
+ */
+ ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+ /* if we are switching from ht to 2.4 clear flags
+ * from any ht related info since 2.4 does not
+ * support ht */
+ if (le16_to_cpu(ctx->staging.channel) !=
+ channel->hw_value)
+ ctx->staging.flags = 0;
+
+ iwl_set_rxon_channel(priv, channel, ctx);
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+ iwl_set_flags_for_band(priv, ctx, channel->band,
+ ctx->vif);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_update_bcast_stations(priv);
+
+ /*
+ * The list of supported rates and rate mask can be different
+ * for each band; since the band may have changed, reset
+ * the rate mask to what mac80211 lists.
+ */
+ iwl_set_rate(priv);
+ }
+
+ if (changed & (IEEE80211_CONF_CHANGE_PS |
+ IEEE80211_CONF_CHANGE_IDLE)) {
+ ret = iwl_power_update_mode(priv, false);
+ if (ret)
+ IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_POWER) {
+ IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+ priv->tx_power_user_lmt, conf->power_level);
+
+ iwl_set_tx_power(priv, conf->power_level, false);
+ }
+
+ for_each_context(priv, ctx) {
+ if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+ continue;
+ iwlagn_commit_rxon(priv, ctx);
+ if (ht_changed[ctx->ctxid])
+ iwlagn_update_qos(priv, ctx);
+ }
+ out:
+ mutex_unlock(&priv->mutex);
+ return ret;
+}
+
+static void iwlagn_check_needed_chains(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct ieee80211_vif *vif = ctx->vif;
+ struct iwl_rxon_context *tmp;
+ struct ieee80211_sta *sta;
+ struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+ bool need_multiple;
+
+ lockdep_assert_held(&priv->mutex);
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ rcu_read_lock();
+ sta = ieee80211_find_sta(vif, bss_conf->bssid);
+ if (sta) {
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ int maxstreams;
+
+ maxstreams = (ht_cap->mcs.tx_params &
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+ >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+ maxstreams += 1;
+
+ need_multiple = true;
+
+ if ((ht_cap->mcs.rx_mask[1] == 0) &&
+ (ht_cap->mcs.rx_mask[2] == 0))
+ need_multiple = false;
+ if (maxstreams <= 1)
+ need_multiple = false;
+ } else {
+ /*
+ * If at all, this can only happen through a race
+ * when the AP disconnects us while we're still
+ * setting up the connection, in that case mac80211
+ * will soon tell us about that.
+ */
+ need_multiple = false;
+ }
+ rcu_read_unlock();
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ /* currently */
+ need_multiple = false;
+ break;
+ default:
+ /* only AP really */
+ need_multiple = true;
+ break;
+ }
+
+ ctx->ht_need_multiple_chains = need_multiple;
+
+ if (!need_multiple) {
+ /* check all contexts */
+ for_each_context(priv, tmp) {
+ if (!tmp->vif)
+ continue;
+ if (tmp->ht_need_multiple_chains) {
+ need_multiple = true;
+ break;
+ }
+ }
+ }
+
+ ht_conf->single_chain_sufficient = !need_multiple;
+}
+
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+ int ret;
+ bool force = false;
+
+ mutex_lock(&priv->mutex);
+
+ if (unlikely(!iwl_is_ready(priv))) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ if (unlikely(!ctx->vif)) {
+ IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ if (changes & BSS_CHANGED_BEACON_INT)
+ force = true;
+
+ if (changes & BSS_CHANGED_QOS) {
+ ctx->qos_data.qos_active = bss_conf->qos;
+ iwlagn_update_qos(priv, ctx);
+ }
+
+ ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+ if (vif->bss_conf.use_short_preamble)
+ ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+ if (changes & BSS_CHANGED_ASSOC) {
+ if (bss_conf->assoc) {
+ iwl_led_associate(priv);
+ priv->timestamp = bss_conf->timestamp;
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ } else {
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_led_disassociate(priv);
+ }
+ }
+
+ if (ctx->ht.enabled) {
+ ctx->ht.protection = bss_conf->ht_operation_mode &
+ IEEE80211_HT_OP_MODE_PROTECTION;
+ ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
+ IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+ iwlagn_check_needed_chains(priv, ctx, bss_conf);
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+
+ if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+ ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+
+ if (bss_conf->use_cts_prot)
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
+ memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
+
+ if (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC) {
+ if (vif->bss_conf.enable_beacon) {
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ priv->beacon_ctx = ctx;
+ } else {
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ priv->beacon_ctx = NULL;
+ }
+ }
+
+ if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+ iwlagn_commit_rxon(priv, ctx);
+
+ if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
+ /*
+ * The chain noise calibration will enable PM upon
+ * completion. If calibration has already been run
+ * then we need to enable power management here.
+ */
+ if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
+ iwl_power_update_mode(priv, false);
+
+ /* Enable RX differential gain and sensitivity calibrations */
+ iwl_chain_noise_reset(priv);
+ priv->start_calib = 1;
+ }
+
+ if (changes & BSS_CHANGED_IBSS) {
+ ret = iwlagn_manage_ibss_station(priv, vif,
+ bss_conf->ibss_joined);
+ if (ret)
+ IWL_ERR(priv, "failed to %s IBSS station %pM\n",
+ bss_conf->ibss_joined ? "add" : "remove",
+ bss_conf->bssid);
+ }
+
+ if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
+ priv->beacon_ctx) {
+ if (iwlagn_update_beacon(priv, vif))
+ IWL_ERR(priv, "Error sending IBSS beacon\n");
+ }
+
+ mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_post_scan(struct iwl_priv *priv)
+{
+ struct iwl_rxon_context *ctx;
+
+ /*
+ * Since setting the RXON may have been deferred while
+ * performing the scan, fire one off if needed
+ */
+ for_each_context(priv, ctx)
+ if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+ iwlagn_commit_rxon(priv, ctx);
+
+ if (priv->cfg->ops->hcmd->set_pan_params)
+ priv->cfg->ops->hcmd->set_pan_params(priv);
+}