diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 68 |
1 files changed, 49 insertions, 19 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index e9150753192..6383d9f8c9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -120,7 +120,6 @@ enum { CALIBRATION_COMPLETE_NOTIFICATION = 0x67, /* 802.11h related */ - RADAR_NOTIFICATION = 0x70, /* not used */ REPLY_QUIET_CMD = 0x71, /* not used */ REPLY_CHANNEL_SWITCH = 0x72, CHANNEL_SWITCH_NOTIFICATION = 0x73, @@ -2248,10 +2247,22 @@ struct iwl_link_quality_cmd { __le32 reserved2; } __attribute__ ((packed)); +/* + * BT configuration enable flags: + * bit 0 - 1: BT channel announcement enabled + * 0: disable + * bit 1 - 1: priority of BT device enabled + * 0: disable + * bit 2 - 1: BT 2 wire support enabled + * 0: disable + */ +#define BT_COEX_DISABLE (0x0) +#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0) +#define BT_ENABLE_PRIORITY BIT(1) +#define BT_ENABLE_2_WIRE BIT(2) + #define BT_COEX_DISABLE (0x0) -#define BT_COEX_MODE_2W (0x1) -#define BT_COEX_MODE_3W (0x2) -#define BT_COEX_MODE_4W (0x3) +#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY) #define BT_LEAD_TIME_MIN (0x0) #define BT_LEAD_TIME_DEF (0x1E) @@ -2510,7 +2521,7 @@ struct iwl_card_state_notif { #define HW_CARD_DISABLED 0x01 #define SW_CARD_DISABLED 0x02 -#define RF_CARD_DISABLED 0x04 +#define CT_CARD_DISABLED 0x04 #define RXON_CARD_DISABLED 0x10 struct iwl_ct_kill_config { @@ -2612,6 +2623,7 @@ struct iwl_ssid_ie { #define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) #define IWL_GOOD_CRC_TH cpu_to_le16(1) #define IWL_MAX_SCAN_SIZE 1024 +#define IWL_MAX_CMD_SIZE 4096 #define IWL_MAX_PROBE_REQUEST 200 /* @@ -2984,7 +2996,7 @@ struct statistics_rx_ht_phy { __le32 agg_crc32_good; __le32 agg_mpdu_cnt; __le32 agg_cnt; - __le32 reserved2; + __le32 unsupport_mcs; } __attribute__ ((packed)); #define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1) @@ -3087,8 +3099,8 @@ struct statistics_div { } __attribute__ ((packed)); struct statistics_general { - __le32 temperature; - __le32 temperature_m; + __le32 temperature; /* radio temperature */ + __le32 temperature_m; /* for 5000 and up, this is radio voltage */ struct statistics_dbg dbg; __le32 sleep_time; __le32 slots_out; @@ -3096,7 +3108,12 @@ struct statistics_general { __le32 ttl_timestamp; struct statistics_div div; __le32 rx_enable_counter; - __le32 reserved1; + /* + * num_of_sos_states: + * count the number of times we have to re-tune + * in order to get out of bad PHY status + */ + __le32 num_of_sos_states; __le32 reserved2; __le32 reserved3; } __attribute__ ((packed)); @@ -3161,13 +3178,30 @@ struct iwl_notif_statistics { /* * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) + * + * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed + * in regardless of how many missed beacons, which mean when driver receive the + * notification, inside the command, it can find all the beacons information + * which include number of total missed beacons, number of consecutive missed + * beacons, number of beacons received and number of beacons expected to + * receive. + * + * If uCode detected consecutive_missed_beacons > 5, it will reset the radio + * in order to bring the radio/PHY back to working state; which has no relation + * to when driver will perform sensitivity calibration. + * + * Driver should set it own missed_beacon_threshold to decide when to perform + * sensitivity calibration based on number of consecutive missed beacons in + * order to improve overall performance, especially in noisy environment. + * */ -/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row, - * then this notification will be sent. */ -#define CONSECUTIVE_MISSED_BCONS_TH 20 + +#define IWL_MISSED_BEACON_THRESHOLD_MIN (1) +#define IWL_MISSED_BEACON_THRESHOLD_DEF (5) +#define IWL_MISSED_BEACON_THRESHOLD_MAX IWL_MISSED_BEACON_THRESHOLD_DEF struct iwl_missed_beacon_notif { - __le32 consequtive_missed_beacons; + __le32 consecutive_missed_beacons; __le32 total_missed_becons; __le32 num_expected_beacons; __le32 num_recvd_beacons; @@ -3437,11 +3471,7 @@ enum { IWL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7, IWL_PHY_CALIBRATE_DC_CMD = 8, IWL_PHY_CALIBRATE_LO_CMD = 9, - IWL_PHY_CALIBRATE_RX_BB_CMD = 10, IWL_PHY_CALIBRATE_TX_IQ_CMD = 11, - IWL_PHY_CALIBRATE_RX_IQ_CMD = 12, - IWL_PHY_CALIBRATION_NOISE_CMD = 13, - IWL_PHY_CALIBRATE_AGC_TABLE_CMD = 14, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16, IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17, |