summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-csr.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-csr.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-csr.h38
1 files changed, 38 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index f13dec9ad9c..fe129c94ae3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -139,6 +139,13 @@
#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
/*
+ * CSR HW resources monitor registers
+ */
+#define CSR_MONITOR_CFG_REG (CSR_BASE+0x214)
+#define CSR_MONITOR_STATUS_REG (CSR_BASE+0x228)
+#define CSR_MONITOR_XTAL_RESOURCES (0x00000010)
+
+/*
* CSR Hardware Revision Workaround Register. Indicates hardware rev;
* "step" determines CCK backoff for txpower calculation. Used for 4965 only.
* See also CSR_HW_REV register.
@@ -173,6 +180,7 @@
#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
#define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
+#define CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */
#define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/
#define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/
@@ -240,6 +248,7 @@
* 001 -- MAC power-down
* 010 -- PHY (radio) power-down
* 011 -- Error
+ * 10: XTAL ON request
* 9-6: SYS_CONFIG
* Indicates current system configuration, reflecting pins on chip
* as forced high/low by device circuit board.
@@ -271,6 +280,7 @@
#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
+#define CSR_GP_CNTRL_REG_FLAG_XTAL_ON (0x00000400)
#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
@@ -396,6 +406,34 @@
#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
/*
+ * SHR target access (Shared block memory space)
+ *
+ * Shared internal registers can be accessed directly from PCI bus through SHR
+ * arbiter without need for the MAC HW to be powered up. This is possible due to
+ * indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and
+ * HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers.
+ *
+ * Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW
+ * need not be powered up so no "grab inc access" is required.
+ */
+
+/*
+ * Registers for accessing shared registers (e.g. SHR_APMG_GP1,
+ * SHR_APMG_XTAL_CFG). For example, to read from SHR_APMG_GP1 register (0x1DC),
+ * first, write to the control register:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access)
+ * second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0].
+ *
+ * To write the register, first, write to the data register
+ * HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access)
+ */
+#define HEEP_CTRL_WRD_PCIEX_CTRL_REG (CSR_BASE+0x0ec)
+#define HEEP_CTRL_WRD_PCIEX_DATA_REG (CSR_BASE+0x0f4)
+
+/*
* HBUS (Host-side Bus)
*
* HBUS registers are mapped directly into PCI bus space, but are used