diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom.h')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom.h | 91 |
1 files changed, 32 insertions, 59 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index d9b590625ae..9e6f31355ee 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -110,9 +110,18 @@ enum { }; /* SKU Capabilities */ +/* 3945 only */ #define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0) #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1) +/* 5000 and up */ +#define EEPROM_SKU_CAP_BAND_POS (4) +#define EEPROM_SKU_CAP_BAND_SELECTION \ + (3 << EEPROM_SKU_CAP_BAND_POS) +#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) +#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) +#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) + /* *regulatory* channel data format in eeprom, one for each channel. * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ struct iwl_eeprom_channel { @@ -120,6 +129,17 @@ struct iwl_eeprom_channel { s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __packed; +enum iwl_eeprom_enhanced_txpwr_flags { + IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), + IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), + IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), + IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), + IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), + IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), + IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), +}; + /** * iwl_eeprom_enhanced_txpwr structure * This structure presents the enhanced regulatory tx power limit layout @@ -127,21 +147,23 @@ struct iwl_eeprom_channel { * Enhanced regulatory tx power portion of eeprom image can be broken down * into individual structures; each one is 8 bytes in size and contain the * following information - * @common: (desc + channel) not used by driver, should _NOT_ be "zero" + * @flags: entry flags + * @channel: channel number * @chain_a_max_pwr: chain a max power in 1/2 dBm * @chain_b_max_pwr: chain b max power in 1/2 dBm * @chain_c_max_pwr: chain c max power in 1/2 dBm - * @reserved: not used, should be "zero" + * @delta_20_in_40: 20-in-40 deltas (hi/lo) * @mimo2_max_pwr: mimo2 max power in 1/2 dBm * @mimo3_max_pwr: mimo3 max power in 1/2 dBm * */ struct iwl_eeprom_enhanced_txpwr { - __le16 common; + u8 flags; + u8 channel; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; - s8 reserved; + u8 delta_20_in_40; s8 mimo2_max; s8 mimo3_max; } __packed; @@ -186,6 +208,8 @@ struct iwl_eeprom_enhanced_txpwr { #define EEPROM_LINK_CALIBRATION (2*0x67) #define EEPROM_LINK_PROCESS_ADJST (2*0x68) #define EEPROM_LINK_OTHERS (2*0x69) +#define EEPROM_LINK_TXP_LIMIT (2*0x6a) +#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) /* agn regulatory - indirect access */ #define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ @@ -207,59 +231,6 @@ struct iwl_eeprom_enhanced_txpwr { #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ -/* 6000 and up regulatory tx power - indirect access */ -/* max. elements per section */ -#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8) -#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2) - -/** - * Partition the enhanced tx power portion of eeprom image into - * 10 sections based on band, modulation, frequency and channel - * - * Section 1: all CCK channels - * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels - * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels - * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT - * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_) - * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT - * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_) - * Section 8: 2.4 GHz channel 13, Both Legacy and HT - * Section 9: 2.4 GHz channel 140, Both Legacy and HT - * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_) - */ -/* 2.4 GHz band: CCK */ -#define EEPROM_LB_CCK_20_COMMON ((0xA8)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */ -/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_LB_OFDM_COMMON ((0xB0)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ -/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_HB_OFDM_COMMON ((0xC8)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ -/* 2.4GHz band channels: - * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */ -#define EEPROM_LB_OFDM_20_BAND ((0xE0)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */ -/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */ -#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */ -/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */ -#define EEPROM_HB_OFDM_20_BAND ((0x148)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */ -/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ -/* 2.4 GHz band, channnel 13: Legacy, HT */ -#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ -/* 5.2 GHz band, channnel 140: Legacy, HT */ -#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ -/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ - - /* 5050 Specific */ #define EEPROM_5050_TX_POWER_VERSION (4) #define EEPROM_5050_EEPROM_VERSION (0x21E) @@ -389,6 +360,8 @@ struct iwl_eeprom_calib_info { #define INDIRECT_CALIBRATION 0x00040000 #define INDIRECT_PROCESS_ADJST 0x00050000 #define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_TXP_LIMIT 0x00070000 +#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 #define INDIRECT_ADDRESS 0x00100000 /* General */ @@ -397,11 +370,10 @@ struct iwl_eeprom_calib_info { #define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ #define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ #define EEPROM_VERSION (2*0x44) /* 2 bytes */ -#define EEPROM_SKU_CAP (2*0x45) /* 1 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ #define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ #define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ #define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ -#define EEPROM_3945_M_VERSION (2*0x4A) /* 1 bytes */ #define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ /* The following masks are to be applied on EEPROM_RADIO_CONFIG */ @@ -504,6 +476,7 @@ struct iwl_eeprom_ops { int iwl_eeprom_init(struct iwl_priv *priv); void iwl_eeprom_free(struct iwl_priv *priv); int iwl_eeprom_check_version(struct iwl_priv *priv); +int iwl_eeprom_check_sku(struct iwl_priv *priv); const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset); |