diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom.h | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h deleted file mode 100644 index 64bfd947cae..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ /dev/null @@ -1,269 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_eeprom_h__ -#define __iwl_eeprom_h__ - -#include <net/mac80211.h> - -struct iwl_priv; - -/* - * EEPROM access time values: - * - * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. - * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). - * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. - * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. - */ -#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ - -#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ -#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ - - -/* - * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags. - * - * IBSS and/or AP operation is allowed *only* on those channels with - * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because - * RADAR detection is not supported by the 4965 driver, but is a - * requirement for establishing a new network for legal operation on channels - * requiring RADAR detection or restricting ACTIVE scanning. - * - * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. - * It only indicates that 20 MHz channel use is supported; HT40 channel - * usage is indicated by a separate set of regulatory flags for each - * HT40 channel pair. - * - * NOTE: Using a channel inappropriately will result in a uCode error! - */ -#define IWL_NUM_TX_CALIB_GROUPS 5 -enum { - EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ - EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ - /* Bit 2 Reserved */ - EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ - EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ - EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - /* Bit 6 Reserved (was Narrow Channel) */ - EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ -}; - -/* SKU Capabilities */ -#define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4) -#define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5) -#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) -#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) -#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) - -/* *regulatory* channel data format in eeprom, one for each channel. - * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ -struct iwl_eeprom_channel { - u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ - s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ -} __packed; - -enum iwl_eeprom_enhanced_txpwr_flags { - IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), - IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), - IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), - IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), - IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), - IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), - IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), - IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), -}; - -/** - * iwl_eeprom_enhanced_txpwr structure - * This structure presents the enhanced regulatory tx power limit layout - * in eeprom image - * Enhanced regulatory tx power portion of eeprom image can be broken down - * into individual structures; each one is 8 bytes in size and contain the - * following information - * @flags: entry flags - * @channel: channel number - * @chain_a_max_pwr: chain a max power in 1/2 dBm - * @chain_b_max_pwr: chain b max power in 1/2 dBm - * @chain_c_max_pwr: chain c max power in 1/2 dBm - * @delta_20_in_40: 20-in-40 deltas (hi/lo) - * @mimo2_max_pwr: mimo2 max power in 1/2 dBm - * @mimo3_max_pwr: mimo3 max power in 1/2 dBm - * - */ -struct iwl_eeprom_enhanced_txpwr { - u8 flags; - u8 channel; - s8 chain_a_max; - s8 chain_b_max; - s8 chain_c_max; - u8 delta_20_in_40; - s8 mimo2_max; - s8 mimo3_max; -} __packed; - -/* calibration */ -struct iwl_eeprom_calib_hdr { - u8 version; - u8 pa_type; - __le16 voltage; -} __packed; - -#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) -#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) - -/* temperature */ -#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) -#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL) - - -/* agn links */ -#define EEPROM_LINK_HOST (2*0x64) -#define EEPROM_LINK_GENERAL (2*0x65) -#define EEPROM_LINK_REGULATORY (2*0x66) -#define EEPROM_LINK_CALIBRATION (2*0x67) -#define EEPROM_LINK_PROCESS_ADJST (2*0x68) -#define EEPROM_LINK_OTHERS (2*0x69) -#define EEPROM_LINK_TXP_LIMIT (2*0x6a) -#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) - -/* agn regulatory - indirect access */ -#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ -#define EEPROM_REG_BAND_2_CHANNELS ((0x26)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ -#define EEPROM_REG_BAND_3_CHANNELS ((0x42)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ -#define EEPROM_REG_BAND_4_CHANNELS ((0x5C)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ -#define EEPROM_REG_BAND_5_CHANNELS ((0x74)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ -#define EEPROM_REG_BAND_24_HT40_CHANNELS ((0x82)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ -#define EEPROM_REG_BAND_52_HT40_CHANNELS ((0x92)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ - -/* 6000 regulatory - indirect access */ -#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ -/* 2.4 GHz */ -extern const u8 iwl_eeprom_band_1[14]; - -#define ADDRESS_MSK 0x0000FFFF -#define INDIRECT_TYPE_MSK 0x000F0000 -#define INDIRECT_HOST 0x00010000 -#define INDIRECT_GENERAL 0x00020000 -#define INDIRECT_REGULATORY 0x00030000 -#define INDIRECT_CALIBRATION 0x00040000 -#define INDIRECT_PROCESS_ADJST 0x00050000 -#define INDIRECT_OTHERS 0x00060000 -#define INDIRECT_TXP_LIMIT 0x00070000 -#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 -#define INDIRECT_ADDRESS 0x00100000 - -/* General */ -#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ -#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */ -#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ -#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ -#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ -#define EEPROM_VERSION (2*0x44) /* 2 bytes */ -#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ -#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ -#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ -#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ - -/* The following masks are to be applied on EEPROM_RADIO_CONFIG */ -#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ -#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ -#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ -#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ -#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ -#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ - -#define EEPROM_RF_CONFIG_TYPE_MAX 0x3 - -#define EEPROM_REGULATORY_BAND_NO_HT40 (0) - -struct iwl_eeprom_ops { - const u32 regulatory_bands[7]; - bool enhanced_txpower; -}; - - -int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev); -void iwl_eeprom_free(struct iwl_priv *priv); -int iwl_eeprom_check_version(struct iwl_priv *priv); -int iwl_eeprom_init_hw_params(struct iwl_priv *priv); -u16 iwl_eeprom_calib_version(struct iwl_priv *priv); -const u8 *iwl_eeprom_query_addr(struct iwl_priv *priv, size_t offset); -u16 iwl_eeprom_query16(struct iwl_priv *priv, size_t offset); -void iwl_eeprom_get_mac(struct iwl_priv *priv, u8 *mac); -int iwl_init_channel_map(struct iwl_priv *priv); -void iwl_free_channel_map(struct iwl_priv *priv); -const struct iwl_channel_info *iwl_get_channel_info( - const struct iwl_priv *priv, - enum ieee80211_band band, u16 channel); -void iwl_rf_config(struct iwl_priv *priv); - -#endif /* __iwl_eeprom_h__ */ |