1 files changed, 255 insertions, 186 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index a4b3663a262..67da3129578 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -54,100 +54,133 @@
 #define IWL_PASSIVE_DWELL_BASE      (100)
 #define IWL_CHANNEL_TUNE_TIME       5
 
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+	int ret;
+	struct iwl_rx_packet *pkt;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_ABORT_CMD,
+		.flags = CMD_WANT_SKB,
+	};
 
+	/* Exit instantly with error when device is not ready
+	 * to receive scan abort command or it does not perform
+	 * hardware scan currently */
+	if (!test_bit(STATUS_READY, &priv->status) ||
+	    !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
+	    !test_bit(STATUS_SCAN_HW, &priv->status) ||
+	    test_bit(STATUS_FW_ERROR, &priv->status) ||
+	    test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return -EIO;
 
-/**
- * iwl_scan_cancel - Cancel any currently executing HW scan
- *
- * NOTE: priv->mutex is not required before calling this function
- */
-int iwl_scan_cancel(struct iwl_priv *priv)
+	ret = iwl_send_cmd_sync(priv, &cmd);
+	if (ret)
+		return ret;
+
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->u.status != CAN_ABORT_STATUS) {
+		/* The scan abort will return 1 for success or
+		 * 2 for "failure".  A failure condition can be
+		 * due to simply not being in an active scan which
+		 * can occur if we send the scan abort before we
+		 * the microcode has notified us that a scan is
+		 * completed. */
+		IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", pkt->u.status);
+		ret = -EIO;
+	}
+
+	iwl_free_pages(priv, cmd.reply_page);
+	return ret;
+}
+
+static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
 {
-	if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
-		clear_bit(STATUS_SCANNING, &priv->status);
-		return 0;
+	/* check if scan was requested from mac80211 */
+	if (priv->scan_request) {
+		IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
+		ieee80211_scan_completed(priv->hw, aborted);
 	}
 
-	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		if (!test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-			IWL_DEBUG_SCAN(priv, "Queuing scan abort.\n");
-			queue_work(priv->workqueue, &priv->abort_scan);
+	priv->is_internal_short_scan = false;
+	priv->scan_vif = NULL;
+	priv->scan_request = NULL;
+}
 
-		} else
-			IWL_DEBUG_SCAN(priv, "Scan abort already in progress.\n");
+void iwl_force_scan_end(struct iwl_priv *priv)
+{
+	lockdep_assert_held(&priv->mutex);
 
-		return test_bit(STATUS_SCANNING, &priv->status);
+	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
+		return;
 	}
 
+	IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
+	clear_bit(STATUS_SCANNING, &priv->status);
+	clear_bit(STATUS_SCAN_HW, &priv->status);
+	clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+	iwl_complete_scan(priv, true);
+}
+
+static void iwl_do_scan_abort(struct iwl_priv *priv)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
+		return;
+	}
+
+	if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
+		return;
+	}
+
+	ret = iwl_send_scan_abort(priv);
+	if (ret) {
+		IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
+		iwl_force_scan_end(priv);
+	} else
+		IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
+}
+
+/**
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+	IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
+	queue_work(priv->workqueue, &priv->abort_scan);
 	return 0;
 }
 EXPORT_SYMBOL(iwl_scan_cancel);
+
 /**
  * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
  * @ms: amount of time to wait (in milliseconds) for scan to abort
  *
- * NOTE: priv->mutex must be held before calling this function
  */
 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
 {
-	unsigned long now = jiffies;
-	int ret;
-
-	ret = iwl_scan_cancel(priv);
-	if (ret && ms) {
-		mutex_unlock(&priv->mutex);
-		while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
-				test_bit(STATUS_SCANNING, &priv->status))
-			msleep(1);
-		mutex_lock(&priv->mutex);
-
-		return test_bit(STATUS_SCANNING, &priv->status);
-	}
+	unsigned long timeout = jiffies + msecs_to_jiffies(ms);
 
-	return ret;
-}
-EXPORT_SYMBOL(iwl_scan_cancel_timeout);
+	lockdep_assert_held(&priv->mutex);
 
-static int iwl_send_scan_abort(struct iwl_priv *priv)
-{
-	int ret = 0;
-	struct iwl_rx_packet *pkt;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SCAN_ABORT_CMD,
-		.flags = CMD_WANT_SKB,
-	};
+	IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
 
-	/* If there isn't a scan actively going on in the hardware
-	 * then we are in between scan bands and not actually
-	 * actively scanning, so don't send the abort command */
-	if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
-		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-		return 0;
-	}
+	iwl_do_scan_abort(priv);
 
-	ret = iwl_send_cmd_sync(priv, &cmd);
-	if (ret) {
-		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-		return ret;
-	}
-
-	pkt = (struct iwl_rx_packet *)cmd.reply_page;
-	if (pkt->u.status != CAN_ABORT_STATUS) {
-		/* The scan abort will return 1 for success or
-		 * 2 for "failure".  A failure condition can be
-		 * due to simply not being in an active scan which
-		 * can occur if we send the scan abort before we
-		 * the microcode has notified us that a scan is
-		 * completed. */
-		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", pkt->u.status);
-		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-		clear_bit(STATUS_SCAN_HW, &priv->status);
+	while (time_before_eq(jiffies, timeout)) {
+		if (!test_bit(STATUS_SCAN_HW, &priv->status))
+			break;
+		msleep(20);
 	}
 
-	iwl_free_pages(priv, cmd.reply_page);
-
-	return ret;
+	return test_bit(STATUS_SCAN_HW, &priv->status);
 }
+EXPORT_SYMBOL(iwl_scan_cancel_timeout);
 
 /* Service response to REPLY_SCAN_CMD (0x80) */
 static void iwl_rx_reply_scan(struct iwl_priv *priv,
@@ -158,7 +191,7 @@ static void iwl_rx_reply_scan(struct iwl_priv *priv,
 	struct iwl_scanreq_notification *notif =
 	    (struct iwl_scanreq_notification *)pkt->u.raw;
 
-	IWL_DEBUG_RX(priv, "Scan request status = 0x%x\n", notif->status);
+	IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
 #endif
 }
 
@@ -206,7 +239,6 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb)
 {
-#ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
@@ -214,29 +246,38 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
-#endif
 
 	/* The HW is no longer scanning */
 	clear_bit(STATUS_SCAN_HW, &priv->status);
 
-	IWL_DEBUG_INFO(priv, "Scan on %sGHz took %dms\n",
+	IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
 		       (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_start, jiffies)));
 
-	/*
-	 * If a request to abort was given, or the scan did not succeed
-	 * then we reset the scan state machine and terminate,
-	 * re-queuing another scan if one has been requested
-	 */
-	if (test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status))
-		IWL_DEBUG_INFO(priv, "Aborted scan completed.\n");
-
-	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
-
-	clear_bit(STATUS_SCANNING, &priv->status);
-
 	queue_work(priv->workqueue, &priv->scan_completed);
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_status != scan_notif->bt_status) {
+		if (scan_notif->bt_status) {
+			/* BT on */
+			if (!priv->bt_ch_announce)
+				priv->bt_traffic_load =
+					IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+			/*
+			 * otherwise, no traffic load information provided
+			 * no changes made
+			 */
+		} else {
+			/* BT off */
+			priv->bt_traffic_load =
+				IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+		}
+		priv->bt_status = scan_notif->bt_status;
+		queue_work(priv->workqueue, &priv->bt_traffic_change_work);
+	}
 }
 
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
@@ -268,18 +309,28 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 			       enum ieee80211_band band,
 			       struct ieee80211_vif *vif)
 {
+	struct iwl_rxon_context *ctx;
 	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
 
-	if (iwl_is_associated(priv)) {
-		/* If we're associated, we clamp the maximum passive
-		 * dwell time to be 98% of the beacon interval (minus
-		 * 2 * channel tune time) */
-		passive = vif ? vif->bss_conf.beacon_int : 0;
-		if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
-			passive = IWL_PASSIVE_DWELL_BASE;
-		passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+	if (iwl_is_any_associated(priv)) {
+		/*
+		 * If we're associated, we clamp the maximum passive
+		 * dwell time to be 98% of the smallest beacon interval
+		 * (minus 2 * channel tune time)
+		 */
+		for_each_context(priv, ctx) {
+			u16 value;
+
+			if (!iwl_is_associated_ctx(ctx))
+				continue;
+			value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
+			if ((value > IWL_PASSIVE_DWELL_BASE) || !value)
+				value = IWL_PASSIVE_DWELL_BASE;
+			value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+			passive = min(value, passive);
+		}
 	}
 
 	return passive;
@@ -296,19 +347,53 @@ void iwl_init_scan_params(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_init_scan_params);
 
-static int iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif)
+static int __must_check iwl_scan_initiate(struct iwl_priv *priv,
+					  struct ieee80211_vif *vif,
+					  bool internal,
+					  enum ieee80211_band band)
 {
+	int ret;
+
 	lockdep_assert_held(&priv->mutex);
 
-	IWL_DEBUG_INFO(priv, "Starting scan...\n");
+	if (WARN_ON(!priv->cfg->ops->utils->request_scan))
+		return -EOPNOTSUPP;
+
+	cancel_delayed_work(&priv->scan_check);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_WARN(priv, "Request scan called when driver not ready.\n");
+		return -EIO;
+	}
+
+	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+		IWL_DEBUG_SCAN(priv,
+			"Multiple concurrent scan requests in parallel.\n");
+		return -EBUSY;
+	}
+
+	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
+		return -EBUSY;
+	}
+
+	IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
+			internal ? "internal short " : "");
+
 	set_bit(STATUS_SCANNING, &priv->status);
-	priv->is_internal_short_scan = false;
+	priv->is_internal_short_scan = internal;
 	priv->scan_start = jiffies;
+	priv->scan_band = band;
 
-	if (WARN_ON(!priv->cfg->ops->utils->request_scan))
-		return -EOPNOTSUPP;
+	ret = priv->cfg->ops->utils->request_scan(priv, vif);
+	if (ret) {
+		clear_bit(STATUS_SCANNING, &priv->status);
+		priv->is_internal_short_scan = false;
+		return ret;
+	}
 
-	priv->cfg->ops->utils->request_scan(priv, vif);
+	queue_delayed_work(priv->workqueue, &priv->scan_check,
+			   IWL_SCAN_CHECK_WATCHDOG);
 
 	return 0;
 }
@@ -327,12 +412,6 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mutex);
 
-	if (!iwl_is_ready_rf(priv)) {
-		ret = -EIO;
-		IWL_DEBUG_MAC80211(priv, "leave - not ready or exit pending\n");
-		goto out_unlock;
-	}
-
 	if (test_bit(STATUS_SCANNING, &priv->status) &&
 	    !priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
@@ -340,14 +419,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 		goto out_unlock;
 	}
 
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
-		ret = -EAGAIN;
-		goto out_unlock;
-	}
-
 	/* mac80211 will only ask for one band at a time */
-	priv->scan_band = req->channels[0]->band;
 	priv->scan_request = req;
 	priv->scan_vif = vif;
 
@@ -355,10 +427,12 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 	 * If an internal scan is in progress, just set
 	 * up the scan_request as per above.
 	 */
-	if (priv->is_internal_short_scan)
+	if (priv->is_internal_short_scan) {
+		IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
 		ret = 0;
-	else
-		ret = iwl_scan_initiate(priv, vif);
+	} else
+		ret = iwl_scan_initiate(priv, vif, false,
+					req->channels[0]->band);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 
@@ -378,11 +452,13 @@ void iwl_internal_short_hw_scan(struct iwl_priv *priv)
 	queue_work(priv->workqueue, &priv->start_internal_scan);
 }
 
-void iwl_bg_start_internal_scan(struct work_struct *work)
+static void iwl_bg_start_internal_scan(struct work_struct *work)
 {
 	struct iwl_priv *priv =
 		container_of(work, struct iwl_priv, start_internal_scan);
 
+	IWL_DEBUG_SCAN(priv, "Start internal scan\n");
+
 	mutex_lock(&priv->mutex);
 
 	if (priv->is_internal_short_scan == true) {
@@ -390,56 +466,31 @@ void iwl_bg_start_internal_scan(struct work_struct *work)
 		goto unlock;
 	}
 
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_SCAN(priv, "not ready or exit pending\n");
-		goto unlock;
-	}
-
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
 		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
 		goto unlock;
 	}
 
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
-		goto unlock;
-	}
-
-	priv->scan_band = priv->band;
-
-	IWL_DEBUG_SCAN(priv, "Start internal short scan...\n");
-	set_bit(STATUS_SCANNING, &priv->status);
-	priv->is_internal_short_scan = true;
-
-	if (WARN_ON(!priv->cfg->ops->utils->request_scan))
-		goto unlock;
-
-	priv->cfg->ops->utils->request_scan(priv, NULL);
+	if (iwl_scan_initiate(priv, NULL, true, priv->band))
+		IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
  unlock:
 	mutex_unlock(&priv->mutex);
 }
-EXPORT_SYMBOL(iwl_bg_start_internal_scan);
 
-void iwl_bg_scan_check(struct work_struct *data)
+static void iwl_bg_scan_check(struct work_struct *data)
 {
 	struct iwl_priv *priv =
 	    container_of(data, struct iwl_priv, scan_check.work);
 
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
+	IWL_DEBUG_SCAN(priv, "Scan check work\n");
 
+	/* Since we are here firmware does not finish scan and
+	 * most likely is in bad shape, so we don't bother to
+	 * send abort command, just force scan complete to mac80211 */
 	mutex_lock(&priv->mutex);
-	if (test_bit(STATUS_SCANNING, &priv->status) &&
-	    !test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan completion watchdog (%dms)\n",
-			       jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
-
-		if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
-			iwl_send_scan_abort(priv);
-	}
+	iwl_force_scan_end(priv);
 	mutex_unlock(&priv->mutex);
 }
-EXPORT_SYMBOL(iwl_bg_scan_check);
 
 /**
  * iwl_fill_probe_req - fill in all required fields and IE for probe request
@@ -489,73 +540,78 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 }
 EXPORT_SYMBOL(iwl_fill_probe_req);
 
-void iwl_bg_abort_scan(struct work_struct *work)
+static void iwl_bg_abort_scan(struct work_struct *work)
 {
 	struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
 
-	if (!test_bit(STATUS_READY, &priv->status) ||
-	    !test_bit(STATUS_GEO_CONFIGURED, &priv->status))
-		return;
-
-	cancel_delayed_work(&priv->scan_check);
+	IWL_DEBUG_SCAN(priv, "Abort scan work\n");
 
+	/* We keep scan_check work queued in case when firmware will not
+	 * report back scan completed notification */
 	mutex_lock(&priv->mutex);
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status))
-		iwl_send_scan_abort(priv);
+	iwl_scan_cancel_timeout(priv, 200);
 	mutex_unlock(&priv->mutex);
 }
-EXPORT_SYMBOL(iwl_bg_abort_scan);
 
-void iwl_bg_scan_completed(struct work_struct *work)
+static void iwl_bg_scan_completed(struct work_struct *work)
 {
 	struct iwl_priv *priv =
 	    container_of(work, struct iwl_priv, scan_completed);
-	bool internal = false;
+	bool aborted;
 
-	IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
+	IWL_DEBUG_SCAN(priv, "Completed %sscan.\n",
+		       priv->is_internal_short_scan ? "internal short " : "");
 
 	cancel_delayed_work(&priv->scan_check);
 
 	mutex_lock(&priv->mutex);
-	if (priv->is_internal_short_scan) {
-		priv->is_internal_short_scan = false;
-		IWL_DEBUG_SCAN(priv, "internal short scan completed\n");
-		internal = true;
-	} else {
-		priv->scan_request = NULL;
-		priv->scan_vif = NULL;
+
+	aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+	if (aborted)
+		IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
+
+	if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
+		goto out_settings;
 	}
 
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+	if (priv->is_internal_short_scan && !aborted) {
+		int err;
+
+		/* Check if mac80211 requested scan during our internal scan */
+		if (priv->scan_request == NULL)
+			goto out_complete;
+
+		/* If so request a new scan */
+		err = iwl_scan_initiate(priv, priv->scan_vif, false,
+					priv->scan_request->channels[0]->band);
+		if (err) {
+			IWL_DEBUG_SCAN(priv,
+				"failed to initiate pending scan: %d\n", err);
+			aborted = true;
+			goto out_complete;
+		}
+
 		goto out;
+	}
+
+out_complete:
+	iwl_complete_scan(priv, aborted);
 
-	if (internal && priv->scan_request)
-		iwl_scan_initiate(priv, priv->scan_vif);
+out_settings:
+	/* Can we still talk to firmware ? */
+	if (!iwl_is_ready_rf(priv))
+		goto out;
 
 	/* Since setting the TXPOWER may have been deferred while
 	 * performing the scan, fire one off */
 	iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
 
-	/*
-	 * Since setting the RXON may have been deferred while
-	 * performing the scan, fire one off if needed
-	 */
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwlcore_commit_rxon(priv);
+	priv->cfg->ops->utils->post_scan(priv);
 
  out:
 	mutex_unlock(&priv->mutex);
-
-	/*
-	 * Do not hold mutex here since this will cause mac80211 to call
-	 * into driver again into functions that will attempt to take
-	 * mutex.
-	 */
-	if (!internal)
-		ieee80211_scan_completed(priv->hw, false);
 }
-EXPORT_SYMBOL(iwl_bg_scan_completed);
 
 void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
 {
@@ -566,3 +622,16 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
 
+void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
+{
+	cancel_work_sync(&priv->start_internal_scan);
+	cancel_work_sync(&priv->abort_scan);
+	cancel_work_sync(&priv->scan_completed);
+
+	if (cancel_delayed_work_sync(&priv->scan_check)) {
+		mutex_lock(&priv->mutex);
+		iwl_force_scan_end(priv);
+		mutex_unlock(&priv->mutex);
+	}
+}
+EXPORT_SYMBOL(iwl_cancel_scan_deferred_work);