summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl3945-base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c89
1 files changed, 41 insertions, 48 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 7ff95f80b81..2cc7e30d774 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -89,7 +89,7 @@ MODULE_LICENSE("GPL");
/* module parameters */
struct iwl_mod_params iwl3945_mod_params = {
- .num_of_queues = IWL39_MAX_NUM_QUEUES,
+ .num_of_queues = IWL39_NUM_QUEUES, /* Not used */
.sw_crypto = 1,
.restart_fw = 1,
/* the rest are 0 by default */
@@ -612,8 +612,8 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
- iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
- iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+ iwl_print_hex_dump(IWL_DL_TX, tx, sizeof(*tx));
+ iwl_print_hex_dump(IWL_DL_TX, (u8 *)tx->hdr,
ieee80211_hdrlen(fc));
/*
@@ -926,7 +926,7 @@ static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
unsigned long status = priv->status;
- IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
+ IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
(flags & SW_CARD_DISABLED) ? "Kill" : "On");
@@ -1644,7 +1644,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_ISR) {
+ if (iwl_debug_level & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
@@ -1663,7 +1663,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Microcode HW error detected. Restarting.\n");
+ IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
@@ -1679,7 +1679,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
@@ -1758,7 +1758,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_debug_level & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
@@ -2041,7 +2041,7 @@ static void iwl3945_nic_start(struct iwl_priv *priv)
*/
static int iwl3945_read_ucode(struct iwl_priv *priv)
{
- struct iwl_ucode *ucode;
+ const struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
@@ -2082,22 +2082,24 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
goto error;
/* Make sure that we got at least our header! */
- if (ucode_raw->size < sizeof(*ucode)) {
+ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}
/* Data from ucode file: header followed by uCode images */
- ucode = (void *)ucode_raw->data;
+ ucode = (struct iwl_ucode_header *)ucode_raw->data;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = le32_to_cpu(ucode->inst_size);
- data_size = le32_to_cpu(ucode->data_size);
- init_size = le32_to_cpu(ucode->init_size);
- init_data_size = le32_to_cpu(ucode->init_data_size);
- boot_size = le32_to_cpu(ucode->boot_size);
+ inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
+ data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
+ init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
+ init_data_size =
+ priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
+ boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
+ src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
@@ -2138,12 +2140,13 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
/* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size < sizeof(*ucode) +
+ if (ucode_raw->size != priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {
- IWL_DEBUG_INFO(priv, "uCode file size %zd too small\n",
- ucode_raw->size);
+ IWL_DEBUG_INFO(priv,
+ "uCode file size %zd does not match expected size\n",
+ ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
@@ -2226,44 +2229,44 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
- src = &ucode->data[0];
- len = priv->ucode_code.len;
+ len = inst_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode instr len %zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
+ src += len;
+
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl3945_up() */
- src = &ucode->data[inst_size];
- len = priv->ucode_data.len;
+ len = data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode data len %zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
+ src += len;
/* Initialization instructions (3rd block) */
if (init_size) {
- src = &ucode->data[inst_size + data_size];
- len = priv->ucode_init.len;
+ len = init_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init instr len %zd\n", len);
memcpy(priv->ucode_init.v_addr, src, len);
+ src += len;
}
/* Initialization data (4th block) */
if (init_data_size) {
- src = &ucode->data[inst_size + data_size + init_size];
- len = priv->ucode_init_data.len;
+ len = init_data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init data len %zd\n", len);
memcpy(priv->ucode_init_data.v_addr, src, len);
+ src += len;
}
/* Bootstrap instructions (5th block) */
- src = &ucode->data[inst_size + data_size + init_size + init_data_size];
- len = priv->ucode_boot.len;
+ len = boot_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) boot instr len %zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
@@ -3305,13 +3308,15 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
* used for controlling the debug level.
*
* See the level definitions in iwl for details.
+ *
+ * FIXME This file can be deprecated as the module parameter is
+ * writable and users can thus also change the debug level
+ * using the /sys/module/iwl3945/parameters/debug file.
*/
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "0x%08X\n", priv->debug_level);
+ return sprintf(buf, "0x%08X\n", iwl_debug_level);
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
@@ -3325,7 +3330,7 @@ static ssize_t store_debug_level(struct device *d,
if (ret)
IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
else
- priv->debug_level = val;
+ iwl_debug_level = val;
return strnlen(buf, count);
}
@@ -3947,15 +3952,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
priv = hw->priv;
SET_IEEE80211_DEV(hw, &pdev->dev);
- if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
- (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
- IWL_ERR(priv,
- "invalid queues_num, should be between %d and %d\n",
- IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
- err = -EINVAL;
- goto out_ieee80211_free_hw;
- }
-
/*
* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan.
@@ -3972,7 +3968,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
priv->inta_mask = CSR_INI_SET_MASK;
#ifdef CONFIG_IWLWIFI_DEBUG
- priv->debug_level = iwl3945_mod_params.debug;
atomic_set(&priv->restrict_refcnt, 0);
#endif
@@ -4268,14 +4263,12 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto,
"using software crypto (default 1 [software])\n");
-module_param_named(debug, iwl3945_mod_params.debug, uint, 0444);
+#ifdef CONFIG_IWLWIFI_DEBUG
+module_param_named(debug, iwl_debug_level, uint, 0644);
MODULE_PARM_DESC(debug, "debug output mask");
+#endif
module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
-
-module_param_named(queues_num, iwl3945_mod_params.num_of_queues, int, 0444);
-MODULE_PARM_DESC(queues_num, "number of hw queues.");
-
module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-20 11:11:09 +0000