1 files changed, 388 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
new file mode 100644
index 00000000000..db4ba086473
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -0,0 +1,388 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/firmware.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "debug.h"
+#include "fw.h"
+#include "commands.h"
+
+static const char fw_barker[] = "*WESTOPFORNOONE*";
+
+/*
+ * @op_code: Op code we're looking for.
+ * @index: There can be several instances of the same opcode within
+ *         the firmware. Index specifies which one we're looking for.
+ */
+static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw,
+			    u16 op_code, u32 index)
+{
+	int offset = -EINVAL, fw_offset;
+	u32 op_index = 0;
+	const u8 *fw_ptr;
+	struct iwm_fw_hdr_rec *rec;
+
+	fw_offset = 0;
+	fw_ptr = fw->data;
+
+	/* We first need to look for the firmware barker */
+	if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) {
+		IWM_ERR(iwm, "No barker string in this FW\n");
+		return -EINVAL;
+	}
+
+	if (fw->size < IWM_HDR_LEN) {
+		IWM_ERR(iwm, "FW is too small (%d)\n", fw->size);
+		return -EINVAL;
+	}
+
+	fw_offset += IWM_HDR_BARKER_LEN;
+
+	while (fw_offset < fw->size) {
+		rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset);
+
+		IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n",
+			   rec->op_code, rec->len, fw_offset);
+
+		if (rec->op_code == IWM_HDR_REC_OP_INVALID) {
+			IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n");
+			break;
+		}
+
+		if (rec->op_code == op_code) {
+			if (op_index == index) {
+				fw_offset += sizeof(struct iwm_fw_hdr_rec);
+				offset = fw_offset;
+				goto out;
+			}
+			op_index++;
+		}
+
+		fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len;
+	}
+
+ out:
+	return offset;
+}
+
+static int iwm_load_firmware_chunk(struct iwm_priv *iwm,
+				   const struct firmware *fw,
+				   struct iwm_fw_img_desc *img_desc)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	u32 chunk_size;
+	const u8 *chunk_ptr;
+	int ret = 0;
+
+	IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n",
+		   img_desc->length, img_desc->address);
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+	target_cmd.handle_by_hw = 1;
+	target_cmd.op2 = 0;
+	target_cmd.resp = 0;
+	target_cmd.eop = 1;
+
+	chunk_size = img_desc->length;
+	chunk_ptr = fw->data + img_desc->offset;
+
+	while (chunk_size > 0) {
+		u32 tmp_chunk_size;
+
+		tmp_chunk_size = min_t(u32, chunk_size,
+				       IWM_MAX_NONWIFI_CMD_BUFF_SIZE);
+
+		target_cmd.addr = cpu_to_le32(img_desc->address +
+				    (chunk_ptr - fw->data - img_desc->offset));
+		target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size);
+
+		IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n",
+			   tmp_chunk_size, target_cmd.addr);
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't load FW chunk\n");
+			break;
+		}
+
+		chunk_size -= tmp_chunk_size;
+		chunk_ptr += tmp_chunk_size;
+	}
+
+	return ret;
+}
+/*
+ * To load a fw image to the target, we basically go through the
+ * fw, looking for OP_MEM_DESC records. Once we found one, we
+ * pass it to iwm_load_firmware_chunk().
+ * The OP_MEM_DESC records contain the actuall memory chunk to be
+ * sent, but also the destination address.
+ */
+static int iwm_load_img(struct iwm_priv *iwm, const char *img_name)
+{
+	const struct firmware *fw;
+	struct iwm_fw_img_desc *img_desc;
+	struct iwm_fw_img_ver *ver;
+	int ret = 0, fw_offset;
+	u32 opcode_idx = 0, build_date;
+	char *build_tag;
+
+	ret = request_firmware(&fw, img_name, iwm_to_dev(iwm));
+	if (ret) {
+		IWM_ERR(iwm, "Request firmware failed");
+		return ret;
+	}
+
+	IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name);
+
+	while (1) {
+		fw_offset = iwm_fw_op_offset(iwm, fw,
+					     IWM_HDR_REC_OP_MEM_DESC,
+					     opcode_idx);
+		if (fw_offset < 0)
+			break;
+
+		img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset);
+		ret = iwm_load_firmware_chunk(iwm, fw, img_desc);
+		if (ret < 0)
+			goto err_release_fw;
+		opcode_idx++;
+	};
+
+	/* Read firmware version */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset);
+
+	/* Read build tag */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_tag = (char *)(fw->data + fw_offset);
+
+	/* Read build date */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_date = *(u32 *)(fw->data + fw_offset);
+
+	IWM_INFO(iwm, "%s:\n", img_name);
+	IWM_INFO(iwm, "\tVersion:    %02X.%02X\n", ver->major, ver->minor);
+	IWM_INFO(iwm, "\tBuild tag:  %s\n", build_tag);
+	IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n",
+		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
+		 IWM_BUILD_DAY(build_date));
+
+
+ err_release_fw:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int iwm_load_umac(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	int ret;
+
+	ret = iwm_load_img(iwm, iwm->bus_ops->umac_name);
+	if (ret < 0)
+		return ret;
+
+	/* We've loaded the UMAC, we can tell the target to jump there */
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP;
+	target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR);
+	target_cmd.op1_sz = 0;
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 1 ;
+	target_cmd.eop = 1;
+
+	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't send JMP command\n");
+
+	return ret;
+}
+
+static int iwm_load_lmac(struct iwm_priv *iwm, const char *img_name)
+{
+	int ret;
+
+	ret = iwm_load_img(iwm, img_name);
+	if (ret < 0)
+		return ret;
+
+	return iwm_send_umac_reset(iwm,
+			cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
+}
+
+/*
+ * We currently have to load 3 FWs:
+ * 1) The UMAC (Upper MAC).
+ * 2) The calibration LMAC (Lower MAC).
+ *    We then send the calibration init command, so that the device can
+ *    run a first calibration round.
+ * 3) The operational LMAC, which replaces the calibration one when it's
+ *    done with the first calibration round.
+ *
+ * Once those 3 FWs have been loaded, we send the periodic calibration
+ * command, and then the device is available for regular 802.11 operations.
+ */
+int iwm_load_fw(struct iwm_priv *iwm)
+{
+	int ret;
+
+	/* We first start downloading the UMAC */
+	ret = iwm_load_umac(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "UMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_ALIVE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret);
+		return ret;
+	}
+
+	/* UMAC is alive, we can download the calibration LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "Calibration LMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_INIT_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration "
+			"LMAC: %d\n", ret);
+		return ret;
+	}
+
+	/* Read EEPROM data */
+	ret = iwm_eeprom_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't init eeprom array\n");
+		return ret;
+	}
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (iwm->conf.hw_b0) {
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map);
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD,
+			  &iwm->conf.periodic_calib_map);
+	}
+#endif
+	/* Read RX IQ calibration result from EEPROM */
+	if (test_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map)) {
+		iwm_store_rxiq_calib_result(iwm);
+		set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_init_calib_cfg(iwm, iwm->conf.init_calib_map);
+
+	while (iwm->calib_done_map != iwm->conf.init_calib_map) {
+		ret = iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
+				       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+		if (ret) {
+			IWM_ERR(iwm, "Wait for calibration result timeout\n");
+			goto out;
+		}
+		IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
+			   "0x%lx, requested calibrations: 0x%lx\n",
+			   iwm->calib_done_map, iwm->conf.init_calib_map);
+	}
+
+	/* Handle LMAC CALIBRATION_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION,
+			       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n");
+		goto out;
+	}
+
+	IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map);
+
+	iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1);
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
+		goto out;
+	}
+
+	/* Download the operational LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "LMAC loading failed\n");
+		goto out;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret);
+		goto out;
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_calib_results(iwm);
+	iwm_send_periodic_calib_cfg(iwm, iwm->conf.periodic_calib_map);
+
+	return 0;
+
+ out:
+	iwm_eeprom_exit(iwm);
+	return ret;
+}