summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/libertas
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/libertas')
-rw-r--r--drivers/net/wireless/libertas/Makefile1
-rw-r--r--drivers/net/wireless/libertas/decl.h11
-rw-r--r--drivers/net/wireless/libertas/dev.h10
-rw-r--r--drivers/net/wireless/libertas/firmware.c224
-rw-r--r--drivers/net/wireless/libertas/if_cs.c90
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c229
-rw-r--r--drivers/net/wireless/libertas/if_spi.c11
-rw-r--r--drivers/net/wireless/libertas/if_usb.c265
-rw-r--r--drivers/net/wireless/libertas/main.c117
9 files changed, 477 insertions, 481 deletions
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index f7d01bfa2e4..eac72f7bd34 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -6,6 +6,7 @@ libertas-y += ethtool.o
libertas-y += main.o
libertas-y += rx.o
libertas-y += tx.o
+libertas-y += firmware.o
libertas-$(CONFIG_LIBERTAS_MESH) += mesh.o
usb8xxx-objs += if_usb.o
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index bc951ab4b68..84a3aa7ac57 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -19,6 +19,10 @@ struct lbs_fw_table {
};
struct lbs_private;
+typedef void (*lbs_fw_cb)(struct lbs_private *priv, int ret,
+ const struct firmware *helper, const struct firmware *mainfw);
+
+struct lbs_private;
struct sk_buff;
struct net_device;
struct cmd_ds_command;
@@ -66,10 +70,13 @@ int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
u32 lbs_fw_index_to_data_rate(u8 index);
u8 lbs_data_rate_to_fw_index(u32 rate);
-int lbs_get_firmware(struct device *dev, const char *user_helper,
- const char *user_mainfw, u32 card_model,
+int lbs_get_firmware(struct device *dev, u32 card_model,
const struct lbs_fw_table *fw_table,
const struct firmware **helper,
const struct firmware **mainfw);
+int lbs_get_firmware_async(struct lbs_private *priv, struct device *device,
+ u32 card_model, const struct lbs_fw_table *fw_table,
+ lbs_fw_cb callback);
+void lbs_wait_for_firmware_load(struct lbs_private *priv);
#endif
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index f3fd447131c..672005430ac 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -7,6 +7,7 @@
#define _LBS_DEV_H_
#include "defs.h"
+#include "decl.h"
#include "host.h"
#include <linux/kfifo.h>
@@ -180,6 +181,15 @@ struct lbs_private {
wait_queue_head_t scan_q;
/* Whether the scan was initiated internally and not by cfg80211 */
bool internal_scan;
+
+ /* Firmware load */
+ u32 fw_model;
+ wait_queue_head_t fw_waitq;
+ struct device *fw_device;
+ const struct firmware *helper_fw;
+ const struct lbs_fw_table *fw_table;
+ const struct lbs_fw_table *fw_iter;
+ lbs_fw_cb fw_callback;
};
extern struct cmd_confirm_sleep confirm_sleep;
diff --git a/drivers/net/wireless/libertas/firmware.c b/drivers/net/wireless/libertas/firmware.c
new file mode 100644
index 00000000000..601f2075355
--- /dev/null
+++ b/drivers/net/wireless/libertas/firmware.c
@@ -0,0 +1,224 @@
+/*
+ * Firmware loading and handling functions.
+ */
+
+#include <linux/sched.h>
+#include <linux/firmware.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include "dev.h"
+#include "decl.h"
+
+static void load_next_firmware_from_table(struct lbs_private *private);
+
+static void lbs_fw_loaded(struct lbs_private *priv, int ret,
+ const struct firmware *helper, const struct firmware *mainfw)
+{
+ unsigned long flags;
+
+ lbs_deb_fw("firmware load complete, code %d\n", ret);
+
+ /* User must free helper/mainfw */
+ priv->fw_callback(priv, ret, helper, mainfw);
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->fw_callback = NULL;
+ wake_up(&priv->fw_waitq);
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+}
+
+static void do_load_firmware(struct lbs_private *priv, const char *name,
+ void (*cb)(const struct firmware *fw, void *context))
+{
+ int ret;
+
+ lbs_deb_fw("Requesting %s\n", name);
+ ret = request_firmware_nowait(THIS_MODULE, true, name,
+ priv->fw_device, GFP_KERNEL, priv, cb);
+ if (ret) {
+ lbs_deb_fw("request_firmware_nowait error %d\n", ret);
+ lbs_fw_loaded(priv, ret, NULL, NULL);
+ }
+}
+
+static void main_firmware_cb(const struct firmware *firmware, void *context)
+{
+ struct lbs_private *priv = context;
+
+ if (!firmware) {
+ /* Failed to find firmware: try next table entry */
+ load_next_firmware_from_table(priv);
+ return;
+ }
+
+ /* Firmware found! */
+ lbs_fw_loaded(priv, 0, priv->helper_fw, firmware);
+}
+
+static void helper_firmware_cb(const struct firmware *firmware, void *context)
+{
+ struct lbs_private *priv = context;
+
+ if (!firmware) {
+ /* Failed to find firmware: try next table entry */
+ load_next_firmware_from_table(priv);
+ return;
+ }
+
+ /* Firmware found! */
+ if (priv->fw_iter->fwname) {
+ priv->helper_fw = firmware;
+ do_load_firmware(priv, priv->fw_iter->fwname, main_firmware_cb);
+ } else {
+ /* No main firmware needed for this helper --> success! */
+ lbs_fw_loaded(priv, 0, firmware, NULL);
+ }
+}
+
+static void load_next_firmware_from_table(struct lbs_private *priv)
+{
+ const struct lbs_fw_table *iter;
+
+ if (!priv->fw_iter)
+ iter = priv->fw_table;
+ else
+ iter = ++priv->fw_iter;
+
+ if (priv->helper_fw) {
+ release_firmware(priv->helper_fw);
+ priv->helper_fw = NULL;
+ }
+
+next:
+ if (!iter->helper) {
+ /* End of table hit. */
+ lbs_fw_loaded(priv, -ENOENT, NULL, NULL);
+ return;
+ }
+
+ if (iter->model != priv->fw_model) {
+ iter++;
+ goto next;
+ }
+
+ priv->fw_iter = iter;
+ do_load_firmware(priv, iter->helper, helper_firmware_cb);
+}
+
+void lbs_wait_for_firmware_load(struct lbs_private *priv)
+{
+ wait_event(priv->fw_waitq, priv->fw_callback == NULL);
+}
+
+/**
+ * lbs_get_firmware_async - Retrieves firmware asynchronously. Can load
+ * either a helper firmware and a main firmware (2-stage), or just the helper.
+ *
+ * @priv: Pointer to lbs_private instance
+ * @dev: A pointer to &device structure
+ * @card_model: Bus-specific card model ID used to filter firmware table
+ * elements
+ * @fw_table: Table of firmware file names and device model numbers
+ * terminated by an entry with a NULL helper name
+ * @callback: User callback to invoke when firmware load succeeds or fails.
+ */
+int lbs_get_firmware_async(struct lbs_private *priv, struct device *device,
+ u32 card_model, const struct lbs_fw_table *fw_table,
+ lbs_fw_cb callback)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ if (priv->fw_callback) {
+ lbs_deb_fw("firmware load already in progress\n");
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ return -EBUSY;
+ }
+
+ priv->fw_device = device;
+ priv->fw_callback = callback;
+ priv->fw_table = fw_table;
+ priv->fw_iter = NULL;
+ priv->fw_model = card_model;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ lbs_deb_fw("Starting async firmware load\n");
+ load_next_firmware_from_table(priv);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lbs_get_firmware_async);
+
+/**
+ * lbs_get_firmware - Retrieves two-stage firmware
+ *
+ * @dev: A pointer to &device structure
+ * @card_model: Bus-specific card model ID used to filter firmware table
+ * elements
+ * @fw_table: Table of firmware file names and device model numbers
+ * terminated by an entry with a NULL helper name
+ * @helper: On success, the helper firmware; caller must free
+ * @mainfw: On success, the main firmware; caller must free
+ *
+ * Deprecated: use lbs_get_firmware_async() instead.
+ *
+ * returns: 0 on success, non-zero on failure
+ */
+int lbs_get_firmware(struct device *dev, u32 card_model,
+ const struct lbs_fw_table *fw_table,
+ const struct firmware **helper,
+ const struct firmware **mainfw)
+{
+ const struct lbs_fw_table *iter;
+ int ret;
+
+ BUG_ON(helper == NULL);
+ BUG_ON(mainfw == NULL);
+
+ /* Search for firmware to use from the table. */
+ iter = fw_table;
+ while (iter && iter->helper) {
+ if (iter->model != card_model)
+ goto next;
+
+ if (*helper == NULL) {
+ ret = request_firmware(helper, iter->helper, dev);
+ if (ret)
+ goto next;
+
+ /* If the device has one-stage firmware (ie cf8305) and
+ * we've got it then we don't need to bother with the
+ * main firmware.
+ */
+ if (iter->fwname == NULL)
+ return 0;
+ }
+
+ if (*mainfw == NULL) {
+ ret = request_firmware(mainfw, iter->fwname, dev);
+ if (ret) {
+ /* Clear the helper to ensure we don't have
+ * mismatched firmware pairs.
+ */
+ release_firmware(*helper);
+ *helper = NULL;
+ }
+ }
+
+ if (*helper && *mainfw)
+ return 0;
+
+ next:
+ iter++;
+ }
+
+ /* Failed */
+ release_firmware(*helper);
+ *helper = NULL;
+ release_firmware(*mainfw);
+ *mainfw = NULL;
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(lbs_get_firmware);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 234ee88dec9..16beaf39dc5 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -738,6 +738,50 @@ done:
return ret;
}
+static void if_cs_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *helper,
+ const struct firmware *mainfw)
+{
+ struct if_cs_card *card = priv->card;
+
+ if (ret) {
+ pr_err("failed to find firmware (%d)\n", ret);
+ return;
+ }
+
+ /* Load the firmware */
+ ret = if_cs_prog_helper(card, helper);
+ if (ret == 0 && (card->model != MODEL_8305))
+ ret = if_cs_prog_real(card, mainfw);
+ if (ret)
+ goto out;
+
+ /* Now actually get the IRQ */
+ ret = request_irq(card->p_dev->irq, if_cs_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
+ if (ret) {
+ pr_err("error in request_irq\n");
+ goto out;
+ }
+
+ /*
+ * Clear any interrupt cause that happened while sending
+ * firmware/initializing card
+ */
+ if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
+ if_cs_enable_ints(card);
+
+ /* And finally bring the card up */
+ priv->fw_ready = 1;
+ if (lbs_start_card(priv) != 0) {
+ pr_err("could not activate card\n");
+ free_irq(card->p_dev->irq, card);
+ }
+
+out:
+ release_firmware(helper);
+ release_firmware(mainfw);
+}
/********************************************************************/
@@ -809,8 +853,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
unsigned int prod_id;
struct lbs_private *priv;
struct if_cs_card *card;
- const struct firmware *helper = NULL;
- const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_CS);
@@ -890,20 +932,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out2;
}
- ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
- &fw_table[0], &helper, &mainfw);
- if (ret) {
- pr_err("failed to find firmware (%d)\n", ret);
- goto out2;
- }
-
- /* Load the firmware early, before calling into libertas.ko */
- ret = if_cs_prog_helper(card, helper);
- if (ret == 0 && (card->model != MODEL_8305))
- ret = if_cs_prog_real(card, mainfw);
- if (ret)
- goto out2;
-
/* Make this card known to the libertas driver */
priv = lbs_add_card(card, &p_dev->dev);
if (!priv) {
@@ -911,37 +939,22 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out2;
}
- /* Finish setting up fields in lbs_private */
+ /* Set up fields in lbs_private */
card->priv = priv;
priv->card = card;
priv->hw_host_to_card = if_cs_host_to_card;
priv->enter_deep_sleep = NULL;
priv->exit_deep_sleep = NULL;
priv->reset_deep_sleep_wakeup = NULL;
- priv->fw_ready = 1;
- /* Now actually get the IRQ */
- ret = request_irq(p_dev->irq, if_cs_interrupt,
- IRQF_SHARED, DRV_NAME, card);
+ /* Get firmware */
+ ret = lbs_get_firmware_async(priv, &p_dev->dev, card->model, fw_table,
+ if_cs_prog_firmware);
if (ret) {
- pr_err("error in request_irq\n");
- goto out3;
- }
-
- /*
- * Clear any interrupt cause that happened while sending
- * firmware/initializing card
- */
- if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
- if_cs_enable_ints(card);
-
- /* And finally bring the card up */
- if (lbs_start_card(priv) != 0) {
- pr_err("could not activate card\n");
+ pr_err("failed to find firmware (%d)\n", ret);
goto out3;
}
- ret = 0;
goto out;
out3:
@@ -951,11 +964,6 @@ out2:
out1:
pcmcia_disable_device(p_dev);
out:
- if (helper)
- release_firmware(helper);
- if (mainfw)
- release_firmware(mainfw);
-
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 9804ebc892d..76caebaa439 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -65,12 +65,6 @@ static void if_sdio_interrupt(struct sdio_func *func);
*/
static u8 user_rmmod;
-static char *lbs_helper_name = NULL;
-module_param_named(helper_name, lbs_helper_name, charp, 0644);
-
-static char *lbs_fw_name = NULL;
-module_param_named(fw_name, lbs_fw_name, charp, 0644);
-
static const struct sdio_device_id if_sdio_ids[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
@@ -123,11 +117,8 @@ struct if_sdio_card {
int model;
unsigned long ioport;
unsigned int scratch_reg;
-
- const char *helper;
- const char *firmware;
- bool helper_allocated;
- bool firmware_allocated;
+ bool started;
+ wait_queue_head_t pwron_waitq;
u8 buffer[65536] __attribute__((aligned(4)));
@@ -140,6 +131,9 @@ struct if_sdio_card {
u8 rx_unit;
};
+static void if_sdio_finish_power_on(struct if_sdio_card *card);
+static int if_sdio_power_off(struct if_sdio_card *card);
+
/********************************************************************/
/* I/O */
/********************************************************************/
@@ -680,12 +674,39 @@ out:
return ret;
}
+static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *helper,
+ const struct firmware *mainfw)
+{
+ struct if_sdio_card *card = priv->card;
+
+ if (ret) {
+ pr_err("failed to find firmware (%d)\n", ret);
+ return;
+ }
+
+ ret = if_sdio_prog_helper(card, helper);
+ if (ret)
+ goto out;
+
+ lbs_deb_sdio("Helper firmware loaded\n");
+
+ ret = if_sdio_prog_real(card, mainfw);
+ if (ret)
+ goto out;
+
+ lbs_deb_sdio("Firmware loaded\n");
+ if_sdio_finish_power_on(card);
+
+out:
+ release_firmware(helper);
+ release_firmware(mainfw);
+}
+
static int if_sdio_prog_firmware(struct if_sdio_card *card)
{
int ret;
u16 scratch;
- const struct firmware *helper = NULL;
- const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_SDIO);
@@ -719,43 +740,18 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
*/
if (scratch == IF_SDIO_FIRMWARE_OK) {
lbs_deb_sdio("firmware already loaded\n");
- goto success;
+ if_sdio_finish_power_on(card);
+ return 0;
} else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
lbs_deb_sdio("firmware may be running\n");
- goto success;
- }
-
- ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
- card->model, &fw_table[0], &helper, &mainfw);
- if (ret) {
- pr_err("failed to find firmware (%d)\n", ret);
- goto out;
+ if_sdio_finish_power_on(card);
+ return 0;
}
- ret = if_sdio_prog_helper(card, helper);
- if (ret)
- goto out;
-
- lbs_deb_sdio("Helper firmware loaded\n");
-
- ret = if_sdio_prog_real(card, mainfw);
- if (ret)
- goto out;
-
- lbs_deb_sdio("Firmware loaded\n");
-
-success:
- sdio_claim_host(card->func);
- sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
- sdio_release_host(card->func);
- ret = 0;
+ ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model,
+ fw_table, if_sdio_do_prog_firmware);
out:
- if (helper)
- release_firmware(helper);
- if (mainfw)
- release_firmware(mainfw);
-
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
@@ -764,55 +760,15 @@ out:
/* Power management */
/********************************************************************/
-static int if_sdio_power_on(struct if_sdio_card *card)
+/* Finish power on sequence (after firmware is loaded) */
+static void if_sdio_finish_power_on(struct if_sdio_card *card)
{
struct sdio_func *func = card->func;
struct lbs_private *priv = card->priv;
- struct mmc_host *host = func->card->host;
int ret;
sdio_claim_host(func);
-
- ret = sdio_enable_func(func);
- if (ret)
- goto release;
-
- /* For 1-bit transfers to the 8686 model, we need to enable the
- * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
- * bit to allow access to non-vendor registers. */
- if ((card->model == MODEL_8686) &&
- (host->caps & MMC_CAP_SDIO_IRQ) &&
- (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
- u8 reg;
-
- func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
- if (ret)
- goto disable;
-
- reg |= SDIO_BUS_ECSI;
- sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
- if (ret)
- goto disable;
- }
-
- card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
- if (ret)
- goto disable;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
- if (ret)
- goto disable;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
- if (ret)
- goto disable;
-
- sdio_release_host(func);
- ret = if_sdio_prog_firmware(card);
- sdio_claim_host(func);
- if (ret)
- goto disable;
+ sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
/*
* Get rx_unit if the chip is SD8688 or newer.
@@ -837,7 +793,7 @@ static int if_sdio_power_on(struct if_sdio_card *card)
*/
ret = sdio_claim_irq(func, if_sdio_interrupt);
if (ret)
- goto disable;
+ goto release;
/*
* Enable interrupts now that everything is set up
@@ -863,11 +819,79 @@ static int if_sdio_power_on(struct if_sdio_card *card)
}
priv->fw_ready = 1;
+ wake_up(&card->pwron_waitq);
- return 0;
+ if (!card->started) {
+ ret = lbs_start_card(priv);
+ if_sdio_power_off(card);
+ if (ret == 0) {
+ card->started = true;
+ /* Tell PM core that we don't need the card to be
+ * powered now */
+ pm_runtime_put_noidle(&func->dev);
+ }
+ }
+
+ return;
release_irq:
sdio_release_irq(func);
+release:
+ sdio_release_host(func);
+}
+
+static int if_sdio_power_on(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct mmc_host *host = func->card->host;
+ int ret;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret)
+ goto release;
+
+ /* For 1-bit transfers to the 8686 model, we need to enable the
+ * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+ * bit to allow access to non-vendor registers. */
+ if ((card->model == MODEL_8686) &&
+ (host->caps & MMC_CAP_SDIO_IRQ) &&
+ (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+ u8 reg;
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+
+ reg |= SDIO_BUS_ECSI;
+ sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+ }
+
+ card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
+ if (ret)
+ goto disable;
+
+ sdio_release_host(func);
+ ret = if_sdio_prog_firmware(card);
+ if (ret) {
+ sdio_disable_func(func);
+ return ret;
+ }
+
+ return 0;
+
disable:
sdio_disable_func(func);
release:
@@ -1074,11 +1098,17 @@ static int if_sdio_power_save(struct lbs_private *priv)
static int if_sdio_power_restore(struct lbs_private *priv)
{
struct if_sdio_card *card = priv->card;
+ int r;
/* Make sure the card will not be powered off by runtime PM */
pm_runtime_get_sync(&card->func->dev);
- return if_sdio_power_on(card);
+ r = if_sdio_power_on(card);
+ if (r)
+ return r;
+
+ wait_event(card->pwron_waitq, priv->fw_ready);
+ return 0;
}
@@ -1179,6 +1209,7 @@ static int if_sdio_probe(struct sdio_func *func,
spin_lock_init(&card->lock);
card->workqueue = create_workqueue("libertas_sdio");
INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
+ init_waitqueue_head(&card->pwron_waitq);
/* Check if we support this card */
for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
@@ -1220,14 +1251,6 @@ static int if_sdio_probe(struct sdio_func *func,
if (ret)
goto err_activate_card;
- ret = lbs_start_card(priv);
- if_sdio_power_off(card);
- if (ret)
- goto err_activate_card;
-
- /* Tell PM core that we don't need the card to be powered now */
- pm_runtime_put_noidle(&func->dev);
-
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -1244,10 +1267,6 @@ free:
kfree(packet);
}
- if (card->helper_allocated)
- kfree(card->helper);
- if (card->firmware_allocated)
- kfree(card->firmware);
kfree(card);
goto out;
@@ -1295,12 +1314,6 @@ static void if_sdio_remove(struct sdio_func *func)
kfree(packet);
}
- if (card->helper_allocated)
- kfree(card->helper);
- if (card->firmware_allocated)
- kfree(card->firmware);
- kfree(card);
-
lbs_deb_leave(LBS_DEB_SDIO);
}
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 50b1ee7721e..9604a1c4a74 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -1064,9 +1064,8 @@ static int if_spi_init_card(struct if_spi_card *card)
goto out;
}
- err = lbs_get_firmware(&card->spi->dev, NULL, NULL,
- card->card_id, &fw_table[0], &helper,
- &mainfw);
+ err = lbs_get_firmware(&card->spi->dev, card->card_id,
+ &fw_table[0], &helper, &mainfw);
if (err) {
netdev_err(priv->dev, "failed to find firmware (%d)\n",
err);
@@ -1095,10 +1094,8 @@ static int if_spi_init_card(struct if_spi_card *card)
goto out;
out:
- if (helper)
- release_firmware(helper);
- if (mainfw)
- release_firmware(mainfw);
+ release_firmware(helper);
+ release_firmware(mainfw);
lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 74da5f1ea24..75403e6e399 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -29,9 +29,6 @@
#define MESSAGE_HEADER_LEN 4
-static char *lbs_fw_name = NULL;
-module_param_named(fw_name, lbs_fw_name, charp, 0644);
-
MODULE_FIRMWARE("libertas/usb8388_v9.bin");
MODULE_FIRMWARE("libertas/usb8388_v5.bin");
MODULE_FIRMWARE("libertas/usb8388.bin");
@@ -44,6 +41,16 @@ enum {
MODEL_8682 = 0x2
};
+/* table of firmware file names */
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8388, "libertas/usb8388_olpc.bin", NULL },
+ { MODEL_8388, "libertas/usb8388_v9.bin", NULL },
+ { MODEL_8388, "libertas/usb8388_v5.bin", NULL },
+ { MODEL_8388, "libertas/usb8388.bin", NULL },
+ { MODEL_8388, "usb8388.bin", NULL },
+ { MODEL_8682, "libertas/usb8682.bin", NULL }
+};
+
static struct usb_device_id if_usb_table[] = {
/* Enter the device signature inside */
{ USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 },
@@ -55,10 +62,9 @@ MODULE_DEVICE_TABLE(usb, if_usb_table);
static void if_usb_receive(struct urb *urb);
static void if_usb_receive_fwload(struct urb *urb);
-static int __if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd);
-static int if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd);
+static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *fw,
+ const struct firmware *unused);
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb);
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
@@ -67,69 +73,6 @@ static void if_usb_free(struct if_usb_card *cardp);
static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
static int if_usb_reset_device(struct if_usb_card *cardp);
-/* sysfs hooks */
-
-/*
- * Set function to write firmware to device's persistent memory
- */
-static ssize_t if_usb_firmware_set(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct lbs_private *priv = to_net_dev(dev)->ml_priv;
- struct if_usb_card *cardp = priv->card;
- int ret;
-
- BUG_ON(buf == NULL);
-
- ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
- if (ret == 0)
- return count;
-
- return ret;
-}
-
-/*
- * lbs_flash_fw attribute to be exported per ethX interface through sysfs
- * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
- * the device's persistent memory:
- * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
- */
-static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
-
-/**
- * if_usb_boot2_set - write firmware to device's persistent memory
- *
- * @dev: target device
- * @attr: device attributes
- * @buf: firmware buffer to write
- * @count: number of bytes to write
- *
- * returns: number of bytes written or negative error code
- */
-static ssize_t if_usb_boot2_set(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct lbs_private *priv = to_net_dev(dev)->ml_priv;
- struct if_usb_card *cardp = priv->card;
- int ret;
-
- BUG_ON(buf == NULL);
-
- ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
- if (ret == 0)
- return count;
-
- return ret;
-}
-
-/*
- * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
- * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
- * to the device's persistent memory:
- * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
- */
-static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
-
/**
* if_usb_write_bulk_callback - callback function to handle the status
* of the URB
@@ -256,6 +199,7 @@ static int if_usb_probe(struct usb_interface *intf,
struct usb_endpoint_descriptor *endpoint;
struct lbs_private *priv;
struct if_usb_card *cardp;
+ int r = -ENOMEM;
int i;
udev = interface_to_usbdev(intf);
@@ -313,20 +257,10 @@ static int if_usb_probe(struct usb_interface *intf,
goto dealloc;
}
- /* Upload firmware */
- kparam_block_sysfs_write(fw_name);
- if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
- kparam_unblock_sysfs_write(fw_name);
- lbs_deb_usbd(&udev->dev, "FW upload failed\n");
- goto err_prog_firmware;
- }
- kparam_unblock_sysfs_write(fw_name);
-
if (!(priv = lbs_add_card(cardp, &intf->dev)))
- goto err_prog_firmware;
+ goto err_add_card;
cardp->priv = priv;
- cardp->priv->fw_ready = 1;
priv->hw_host_to_card = if_usb_host_to_card;
priv->enter_deep_sleep = NULL;
@@ -339,42 +273,25 @@ static int if_usb_probe(struct usb_interface *intf,
cardp->boot2_version = udev->descriptor.bcdDevice;
- if_usb_submit_rx_urb(cardp);
-
- if (lbs_start_card(priv))
- goto err_start_card;
-
- if_usb_setup_firmware(priv);
-
usb_get_dev(udev);
usb_set_intfdata(intf, cardp);
- if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
- netdev_err(priv->dev,
- "cannot register lbs_flash_fw attribute\n");
-
- if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
- netdev_err(priv->dev,
- "cannot register lbs_flash_boot2 attribute\n");
-
- /*
- * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
- */
- priv->wol_criteria = EHS_REMOVE_WAKEUP;
- if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
- priv->ehs_remove_supported = false;
+ r = lbs_get_firmware_async(priv, &udev->dev, cardp->model,
+ fw_table, if_usb_prog_firmware);
+ if (r)
+ goto err_get_fw;
return 0;
-err_start_card:
+err_get_fw:
lbs_remove_card(priv);
-err_prog_firmware:
+err_add_card:
if_usb_reset_device(cardp);
dealloc:
if_usb_free(cardp);
error:
- return -ENOMEM;
+ return r;
}
/**
@@ -389,9 +306,6 @@ static void if_usb_disconnect(struct usb_interface *intf)
lbs_deb_enter(LBS_DEB_MAIN);
- device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
- device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
-
cardp->surprise_removed = 1;
if (priv) {
@@ -912,121 +826,22 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
return ret;
}
-
-/**
-* if_usb_prog_firmware - programs the firmware subject to cmd
-*
-* @cardp: the if_usb_card descriptor
-* @fwname: firmware or boot2 image file name
-* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
-* or BOOT_CMD_UPDATE_BOOT2.
-* returns: 0 or error code
-*/
-static int if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd)
-{
- struct lbs_private *priv = cardp->priv;
- unsigned long flags, caps;
- int ret;
-
- caps = priv->fwcapinfo;
- if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
- ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
- return -EOPNOTSUPP;
-
- /* Ensure main thread is idle. */
- spin_lock_irqsave(&priv->driver_lock, flags);
- while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
- spin_unlock_irqrestore(&priv->driver_lock, flags);
- if (wait_event_interruptible(priv->waitq,
- (priv->cur_cmd == NULL &&
- priv->dnld_sent == DNLD_RES_RECEIVED))) {
- return -ERESTARTSYS;
- }
- spin_lock_irqsave(&priv->driver_lock, flags);
- }
- priv->dnld_sent = DNLD_BOOTCMD_SENT;
- spin_unlock_irqrestore(&priv->driver_lock, flags);
-
- ret = __if_usb_prog_firmware(cardp, fwname, cmd);
-
- spin_lock_irqsave(&priv->driver_lock, flags);
- priv->dnld_sent = DNLD_RES_RECEIVED;
- spin_unlock_irqrestore(&priv->driver_lock, flags);
-
- wake_up(&priv->waitq);
-
- return ret;
-}
-
-/* table of firmware file names */
-static const struct {
- u32 model;
- const char *fwname;
-} fw_table[] = {
- { MODEL_8388, "libertas/usb8388_v9.bin" },
- { MODEL_8388, "libertas/usb8388_v5.bin" },
- { MODEL_8388, "libertas/usb8388.bin" },
- { MODEL_8388, "usb8388.bin" },
- { MODEL_8682, "libertas/usb8682.bin" }
-};
-
-#ifdef CONFIG_OLPC
-
-static int try_olpc_fw(struct if_usb_card *cardp)
-{
- int retval = -ENOENT;
-
- /* try the OLPC firmware first; fall back to fw_table list */
- if (machine_is_olpc() && cardp->model == MODEL_8388)
- retval = request_firmware(&cardp->fw,
- "libertas/usb8388_olpc.bin", &cardp->udev->dev);
- return retval;
-}
-
-#else
-static int try_olpc_fw(struct if_usb_card *cardp) { return -ENOENT; }
-#endif /* !CONFIG_OLPC */
-
-static int get_fw(struct if_usb_card *cardp, const char *fwname)
-{
- int i;
-
- /* Try user-specified firmware first */
- if (fwname)
- return request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
-
- /* Handle OLPC firmware */
- if (try_olpc_fw(cardp) == 0)
- return 0;
-
- /* Otherwise search for firmware to use */
- for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
- if (fw_table[i].model != cardp->model)
- continue;
- if (request_firmware(&cardp->fw, fw_table[i].fwname,
- &cardp->udev->dev) == 0)
- return 0;
- }
-
- return -ENOENT;
-}
-
-static int __if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd)
+static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *fw,
+ const struct firmware *unused)
{
+ struct if_usb_card *cardp = priv->card;
int i = 0;
static int reset_count = 10;
- int ret = 0;
lbs_deb_enter(LBS_DEB_USB);
- ret = get_fw(cardp, fwname);
if (ret) {
pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
+ cardp->fw = fw;
if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
ret = -EINVAL;
goto release_fw;
@@ -1053,7 +868,7 @@ restart:
do {
int j = 0;
i++;
- if_usb_issue_boot_command(cardp, cmd);
+ if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
/* wait for command response */
do {
j++;
@@ -1109,13 +924,27 @@ restart:
goto release_fw;
}
+ cardp->priv->fw_ready = 1;
+ if_usb_submit_rx_urb(cardp);
+
+ if (lbs_start_card(priv))
+ goto release_fw;
+
+ if_usb_setup_firmware(priv);
+
+ /*
+ * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
+ */
+ priv->wol_criteria = EHS_REMOVE_WAKEUP;
+ if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
+ priv->ehs_remove_supported = false;
+
release_fw:
release_firmware(cardp->fw);
cardp->fw = NULL;
done:
- lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
- return ret;
+ lbs_deb_leave(LBS_DEB_USB);
}
@@ -1128,8 +957,10 @@ static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
lbs_deb_enter(LBS_DEB_USB);
- if (priv->psstate != PS_STATE_FULL_POWER)
- return -1;
+ if (priv->psstate != PS_STATE_FULL_POWER) {
+ ret = -1;
+ goto out;
+ }
#ifdef CONFIG_OLPC
if (machine_is_olpc()) {
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 957681dede1..e96ee0aa843 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -878,6 +878,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
priv->is_host_sleep_configured = 0;
priv->is_host_sleep_activated = 0;
init_waitqueue_head(&priv->host_sleep_q);
+ init_waitqueue_head(&priv->fw_waitq);
mutex_init(&priv->lock);
setup_timer(&priv->command_timer, lbs_cmd_timeout_handler,
@@ -1033,7 +1034,11 @@ void lbs_remove_card(struct lbs_private *priv)
lbs_deb_enter(LBS_DEB_MAIN);
lbs_remove_mesh(priv);
- lbs_scan_deinit(priv);
+
+ if (priv->wiphy_registered)
+ lbs_scan_deinit(priv);
+
+ lbs_wait_for_firmware_load(priv);
/* worker thread destruction blocks on the in-flight command which
* should have been cleared already in lbs_stop_card().
@@ -1128,6 +1133,11 @@ void lbs_stop_card(struct lbs_private *priv)
goto out;
dev = priv->dev;
+ /* If the netdev isn't registered, it means that lbs_start_card() was
+ * never called so we have nothing to do here. */
+ if (dev->reg_state != NETREG_REGISTERED)
+ goto out;
+
netif_stop_queue(dev);
netif_carrier_off(dev);
@@ -1177,111 +1187,6 @@ void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx)
}
EXPORT_SYMBOL_GPL(lbs_notify_command_response);
-/**
- * lbs_get_firmware - Retrieves two-stage firmware
- *
- * @dev: A pointer to &device structure
- * @user_helper: User-defined helper firmware file
- * @user_mainfw: User-defined main firmware file
- * @card_model: Bus-specific card model ID used to filter firmware table
- * elements
- * @fw_table: Table of firmware file names and device model numbers
- * terminated by an entry with a NULL helper name
- * @helper: On success, the helper firmware; caller must free
- * @mainfw: On success, the main firmware; caller must free
- *
- * returns: 0 on success, non-zero on failure
- */
-int lbs_get_firmware(struct device *dev, const char *user_helper,
- const char *user_mainfw, u32 card_model,
- const struct lbs_fw_table *fw_table,
- const struct firmware **helper,
- const struct firmware **mainfw)
-{
- const struct lbs_fw_table *iter;
- int ret;
-
- BUG_ON(helper == NULL);
- BUG_ON(mainfw == NULL);
-
- /* Try user-specified firmware first */
- if (user_helper) {
- ret = request_firmware(helper, user_helper, dev);
- if (ret) {
- dev_err(dev, "couldn't find helper firmware %s\n",
- user_helper);
- goto fail;
- }
- }
- if (user_mainfw) {
- ret = request_firmware(mainfw, user_mainfw, dev);
- if (ret) {
- dev_err(dev, "couldn't find main firmware %s\n",
- user_mainfw);
- goto fail;
- }
- }
-
- if (*helper && *mainfw)
- return 0;
-
- /* Otherwise search for firmware to use. If neither the helper or
- * the main firmware were specified by the user, then we need to
- * make sure that found helper & main are from the same entry in
- * fw_table.
- */
- iter = fw_table;
- while (iter && iter->helper) {
- if (iter->model != card_model)
- goto next;
-
- if (*helper == NULL) {
- ret = request_firmware(helper, iter->helper, dev);
- if (ret)
- goto next;
-
- /* If the device has one-stage firmware (ie cf8305) and
- * we've got it then we don't need to bother with the
- * main firmware.
- */
- if (iter->fwname == NULL)
- return 0;
- }
-
- if (*mainfw == NULL) {
- ret = request_firmware(mainfw, iter->fwname, dev);
- if (ret && !user_helper) {
- /* Clear the helper if it wasn't user-specified
- * and the main firmware load failed, to ensure
- * we don't have mismatched firmware pairs.
- */
- release_firmware(*helper);
- *helper = NULL;
- }
- }
-
- if (*helper && *mainfw)
- return 0;
-
- next:
- iter++;
- }
-
- fail:
- /* Failed */
- if (*helper) {
- release_firmware(*helper);
- *helper = NULL;
- }
- if (*mainfw) {
- release_firmware(*mainfw);
- *mainfw = NULL;
- }
-
- return -ENOENT;
-}
-EXPORT_SYMBOL_GPL(lbs_get_firmware);
-
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);