summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex/sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/mwifiex/sdio.c')
-rw-r--r--drivers/net/wireless/mwifiex/sdio.c463
1 files changed, 326 insertions, 137 deletions
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 363ba31b58b..5ee5ed02ecc 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -77,6 +77,17 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ if (id->driver_data) {
+ struct mwifiex_sdio_device *data = (void *)id->driver_data;
+
+ card->firmware = data->firmware;
+ card->reg = data->reg;
+ card->max_ports = data->max_ports;
+ card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
+ card->supports_sdio_new_mode = data->supports_sdio_new_mode;
+ card->has_control_mask = data->has_control_mask;
+ }
+
sdio_claim_host(func);
ret = sdio_enable_func(func);
sdio_release_host(func);
@@ -251,12 +262,19 @@ static int mwifiex_sdio_resume(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8787 (0x9119)
/* Device ID for SD8797 */
#define SDIO_DEVICE_ID_MARVELL_8797 (0x9129)
+/* Device ID for SD8897 */
+#define SDIO_DEVICE_ID_MARVELL_8897 (0x912d)
/* WLAN IDs */
static const struct sdio_device_id mwifiex_ids[] = {
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8786},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8787},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8797},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8897},
{},
};
@@ -282,13 +300,13 @@ static struct sdio_driver mwifiex_sdio = {
* This function writes data into SDIO card register.
*/
static int
-mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
+mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
{
struct sdio_mmc_card *card = adapter->card;
int ret = -1;
sdio_claim_host(card->func);
- sdio_writeb(card->func, (u8) data, reg, &ret);
+ sdio_writeb(card->func, data, reg, &ret);
sdio_release_host(card->func);
return ret;
@@ -298,7 +316,7 @@ mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
* This function reads data from SDIO card register.
*/
static int
-mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data)
+mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data)
{
struct sdio_mmc_card *card = adapter->card;
int ret = -1;
@@ -400,7 +418,40 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
}
/*
- * This function initializes the IO ports.
+ * This function is used to initialize IO ports for the
+ * chipsets supporting SDIO new mode eg SD8897.
+ */
+static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter)
+{
+ u8 reg;
+
+ adapter->ioport = MEM_PORT;
+
+ /* enable sdio new mode */
+ if (mwifiex_read_reg(adapter, CARD_CONFIG_2_1_REG, &reg))
+ return -1;
+ if (mwifiex_write_reg(adapter, CARD_CONFIG_2_1_REG,
+ reg | CMD53_NEW_MODE))
+ return -1;
+
+ /* Configure cmd port and enable reading rx length from the register */
+ if (mwifiex_read_reg(adapter, CMD_CONFIG_0, &reg))
+ return -1;
+ if (mwifiex_write_reg(adapter, CMD_CONFIG_0, reg | CMD_PORT_RD_LEN_EN))
+ return -1;
+
+ /* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is
+ * completed
+ */
+ if (mwifiex_read_reg(adapter, CMD_CONFIG_1, &reg))
+ return -1;
+ if (mwifiex_write_reg(adapter, CMD_CONFIG_1, reg | CMD_PORT_AUTO_EN))
+ return -1;
+
+ return 0;
+}
+
+/* This function initializes the IO ports.
*
* The following operations are performed -
* - Read the IO ports (0, 1 and 2)
@@ -409,10 +460,17 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
*/
static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
{
- u32 reg;
+ u8 reg;
+ struct sdio_mmc_card *card = adapter->card;
adapter->ioport = 0;
+ if (card->supports_sdio_new_mode) {
+ if (mwifiex_init_sdio_new_mode(adapter))
+ return -1;
+ goto cont;
+ }
+
/* Read the IO port */
if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, &reg))
adapter->ioport |= (reg & 0xff);
@@ -428,19 +486,19 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
adapter->ioport |= ((reg & 0xff) << 16);
else
return -1;
-
+cont:
pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
/* Set Host interrupt reset to read to clear */
if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, &reg))
mwifiex_write_reg(adapter, HOST_INT_RSR_REG,
- reg | SDIO_INT_MASK);
+ reg | card->reg->sdio_int_mask);
else
return -1;
/* Dnld/Upld ready set to auto reset */
- if (!mwifiex_read_reg(adapter, CARD_MISC_CFG_REG, &reg))
- mwifiex_write_reg(adapter, CARD_MISC_CFG_REG,
+ if (!mwifiex_read_reg(adapter, card->reg->card_misc_cfg_reg, &reg))
+ mwifiex_write_reg(adapter, card->reg->card_misc_cfg_reg,
reg | AUTO_RE_ENABLE_INT);
else
return -1;
@@ -486,34 +544,42 @@ static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter,
static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
{
struct sdio_mmc_card *card = adapter->card;
- u16 rd_bitmap = card->mp_rd_bitmap;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
+ u32 rd_bitmap = card->mp_rd_bitmap;
- dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%04x\n", rd_bitmap);
+ dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap);
- if (!(rd_bitmap & (CTRL_PORT_MASK | DATA_PORT_MASK)))
- return -1;
+ if (card->supports_sdio_new_mode) {
+ if (!(rd_bitmap & reg->data_port_mask))
+ return -1;
+ } else {
+ if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
+ return -1;
+ }
- if (card->mp_rd_bitmap & CTRL_PORT_MASK) {
- card->mp_rd_bitmap &= (u16) (~CTRL_PORT_MASK);
+ if ((card->has_control_mask) &&
+ (card->mp_rd_bitmap & CTRL_PORT_MASK)) {
+ card->mp_rd_bitmap &= (u32) (~CTRL_PORT_MASK);
*port = CTRL_PORT;
- dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%04x\n",
+ dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%08x\n",
*port, card->mp_rd_bitmap);
- } else {
- if (card->mp_rd_bitmap & (1 << card->curr_rd_port)) {
- card->mp_rd_bitmap &= (u16)
- (~(1 << card->curr_rd_port));
- *port = card->curr_rd_port;
+ return 0;
+ }
- if (++card->curr_rd_port == MAX_PORT)
- card->curr_rd_port = 1;
- } else {
- return -1;
- }
+ if (!(card->mp_rd_bitmap & (1 << card->curr_rd_port)))
+ return -1;
+
+ /* We are now handling the SDIO data ports */
+ card->mp_rd_bitmap &= (u32)(~(1 << card->curr_rd_port));
+ *port = card->curr_rd_port;
+
+ if (++card->curr_rd_port == card->max_ports)
+ card->curr_rd_port = reg->start_rd_port;
+
+ dev_dbg(adapter->dev,
+ "data: port=%d mp_rd_bitmap=0x%08x -> 0x%08x\n",
+ *port, rd_bitmap, card->mp_rd_bitmap);
- dev_dbg(adapter->dev,
- "data: port=%d mp_rd_bitmap=0x%04x -> 0x%04x\n",
- *port, rd_bitmap, card->mp_rd_bitmap);
- }
return 0;
}
@@ -524,35 +590,45 @@ static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
* increased (provided it does not reach the maximum limit, in which
* case it is reset to 1)
*/
-static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port)
+static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u32 *port)
{
struct sdio_mmc_card *card = adapter->card;
- u16 wr_bitmap = card->mp_wr_bitmap;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
+ u32 wr_bitmap = card->mp_wr_bitmap;
- dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%04x\n", wr_bitmap);
+ dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%08x\n", wr_bitmap);
- if (!(wr_bitmap & card->mp_data_port_mask))
+ if (card->supports_sdio_new_mode &&
+ !(wr_bitmap & reg->data_port_mask)) {
+ adapter->data_sent = true;
+ return -EBUSY;
+ } else if (!card->supports_sdio_new_mode &&
+ !(wr_bitmap & card->mp_data_port_mask)) {
return -1;
+ }
if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) {
- card->mp_wr_bitmap &= (u16) (~(1 << card->curr_wr_port));
+ card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port));
*port = card->curr_wr_port;
- if (++card->curr_wr_port == card->mp_end_port)
- card->curr_wr_port = 1;
+ if (((card->supports_sdio_new_mode) &&
+ (++card->curr_wr_port == card->max_ports)) ||
+ ((!card->supports_sdio_new_mode) &&
+ (++card->curr_wr_port == card->mp_end_port)))
+ card->curr_wr_port = reg->start_wr_port;
} else {
adapter->data_sent = true;
return -EBUSY;
}
- if (*port == CTRL_PORT) {
- dev_err(adapter->dev, "invalid data port=%d cur port=%d"
- " mp_wr_bitmap=0x%04x -> 0x%04x\n",
+ if ((card->has_control_mask) && (*port == CTRL_PORT)) {
+ dev_err(adapter->dev,
+ "invalid data port=%d cur port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
*port, card->curr_wr_port, wr_bitmap,
card->mp_wr_bitmap);
return -1;
}
- dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%04x -> 0x%04x\n",
+ dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
*port, wr_bitmap, card->mp_wr_bitmap);
return 0;
@@ -564,11 +640,12 @@ static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port)
static int
mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
{
+ struct sdio_mmc_card *card = adapter->card;
u32 tries;
- u32 cs;
+ u8 cs;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
- if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs))
+ if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs))
break;
else if ((cs & bits) == bits)
return 0;
@@ -587,12 +664,14 @@ mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
static int
mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
{
- u32 fws0, fws1;
+ struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
+ u8 fws0, fws1;
- if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0))
+ if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0))
return -1;
- if (mwifiex_read_reg(adapter, CARD_FW_STATUS1_REG, &fws1))
+ if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1))
return -1;
*dat = (u16) ((fws1 << 8) | fws0);
@@ -608,14 +687,14 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
*/
static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
{
- u32 host_int_mask;
+ u8 host_int_mask, host_int_disable = HOST_INT_DISABLE;
/* Read back the host_int_mask register */
if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
return -1;
/* Update with the mask and write back to the register */
- host_int_mask &= ~HOST_INT_DISABLE;
+ host_int_mask &= ~host_int_disable;
if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
dev_err(adapter->dev, "disable host interrupt failed\n");
@@ -633,8 +712,11 @@ static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
*/
static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
{
+ struct sdio_mmc_card *card = adapter->card;
+
/* Simply write the mask to the register */
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, HOST_INT_ENABLE)) {
+ if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG,
+ card->reg->host_int_enable)) {
dev_err(adapter->dev, "enable host interrupt failed\n");
return -1;
}
@@ -686,11 +768,13 @@ static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
struct mwifiex_fw_image *fw)
{
+ struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret;
u8 *firmware = fw->fw_buf;
u32 firmware_len = fw->fw_len;
u32 offset = 0;
- u32 base0, base1;
+ u8 base0, base1;
u8 *fwbuf;
u16 len = 0;
u32 txlen, tx_blocks = 0, tries;
@@ -727,7 +811,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
break;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
- ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_0,
+ ret = mwifiex_read_reg(adapter, reg->base_0_reg,
&base0);
if (ret) {
dev_err(adapter->dev,
@@ -736,7 +820,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
base0, base0);
goto done;
}
- ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_1,
+ ret = mwifiex_read_reg(adapter, reg->base_1_reg,
&base1);
if (ret) {
dev_err(adapter->dev,
@@ -828,10 +912,11 @@ done:
static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
u32 poll_num)
{
+ struct sdio_mmc_card *card = adapter->card;
int ret = 0;
u16 firmware_stat;
u32 tries;
- u32 winner_status;
+ u8 winner_status;
/* Wait for firmware initialization event */
for (tries = 0; tries < poll_num; tries++) {
@@ -849,7 +934,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
if (ret) {
if (mwifiex_read_reg
- (adapter, CARD_FW_STATUS0_REG, &winner_status))
+ (adapter, card->reg->status_reg_0, &winner_status))
winner_status = 0;
if (winner_status)
@@ -866,12 +951,12 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
- u32 sdio_ireg;
+ u8 sdio_ireg;
unsigned long flags;
- if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
- REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK,
- 0)) {
+ if (mwifiex_read_data_sync(adapter, card->mp_regs,
+ card->reg->max_mp_regs,
+ REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0)) {
dev_err(adapter->dev, "read mp_regs failed\n");
return;
}
@@ -880,6 +965,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
if (sdio_ireg) {
/*
* DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+ * For SDIO new mode CMD port interrupts
+ * DN_LD_CMD_PORT_HOST_INT_STATUS and/or
+ * UP_LD_CMD_PORT_HOST_INT_STATUS
* Clear the interrupt status register
*/
dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg);
@@ -1003,11 +1091,11 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
s32 f_aggr_cur = 0;
struct sk_buff *skb_deaggr;
u32 pind;
- u32 pkt_len, pkt_type = 0;
+ u32 pkt_len, pkt_type, mport;
u8 *curr_ptr;
u32 rx_len = skb->len;
- if (port == CTRL_PORT) {
+ if ((card->has_control_mask) && (port == CTRL_PORT)) {
/* Read the command Resp without aggr */
dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
"response\n", __func__);
@@ -1024,7 +1112,10 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
goto rx_curr_single;
}
- if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) {
+ if ((!card->has_control_mask && (card->mp_rd_bitmap &
+ card->reg->data_port_mask)) ||
+ (card->has_control_mask && (card->mp_rd_bitmap &
+ (~((u32) CTRL_PORT_MASK))))) {
/* Some more data RX pending */
dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
@@ -1060,10 +1151,10 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
if (f_aggr_cur) {
dev_dbg(adapter->dev, "info: current packet aggregation\n");
/* Curr pkt can be aggregated */
- MP_RX_AGGR_SETUP(card, skb, port);
+ mp_rx_aggr_setup(card, skb, port);
if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
- MP_RX_AGGR_PORT_LIMIT_REACHED(card)) {
+ mp_rx_aggr_port_limit_reached(card)) {
dev_dbg(adapter->dev, "info: %s: aggregated packet "
"limit reached\n", __func__);
/* No more pkts allowed in Aggr buf, rx it */
@@ -1076,11 +1167,28 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
card->mpa_rx.pkt_cnt);
+ if (card->supports_sdio_new_mode) {
+ int i;
+ u32 port_count;
+
+ for (i = 0, port_count = 0; i < card->max_ports; i++)
+ if (card->mpa_rx.ports & BIT(i))
+ port_count++;
+
+ /* Reading data from "start_port + 0" to "start_port +
+ * port_count -1", so decrease the count by 1
+ */
+ port_count--;
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+ (port_count << 8)) + card->mpa_rx.start_port;
+ } else {
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+ (card->mpa_rx.ports << 4)) +
+ card->mpa_rx.start_port;
+ }
+
if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
- card->mpa_rx.buf_len,
- (adapter->ioport | 0x1000 |
- (card->mpa_rx.ports << 4)) +
- card->mpa_rx.start_port, 1))
+ card->mpa_rx.buf_len, mport, 1))
goto error;
curr_ptr = card->mpa_rx.buf;
@@ -1167,6 +1275,7 @@ error:
static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret = 0;
u8 sdio_ireg;
struct sk_buff *skb;
@@ -1175,6 +1284,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
u32 rx_blocks;
u16 rx_len;
unsigned long flags;
+ u32 bitmap;
+ u8 cr;
spin_lock_irqsave(&adapter->int_lock, flags);
sdio_ireg = adapter->int_status;
@@ -1184,10 +1295,60 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
if (!sdio_ireg)
return ret;
+ /* Following interrupt is only for SDIO new mode */
+ if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent)
+ adapter->cmd_sent = false;
+
+ /* Following interrupt is only for SDIO new mode */
+ if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) {
+ u32 pkt_type;
+
+ /* read the len of control packet */
+ rx_len = card->mp_regs[CMD_RD_LEN_1] << 8;
+ rx_len |= (u16) card->mp_regs[CMD_RD_LEN_0];
+ rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE);
+ if (rx_len <= INTF_HEADER_LEN ||
+ (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
+ MWIFIEX_RX_DATA_BUF_SIZE)
+ return -1;
+ rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
+
+ skb = dev_alloc_skb(rx_len);
+ if (!skb)
+ return -1;
+
+ skb_put(skb, rx_len);
+
+ if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data,
+ skb->len, adapter->ioport |
+ CMD_PORT_SLCT)) {
+ dev_err(adapter->dev,
+ "%s: failed to card_to_host", __func__);
+ dev_kfree_skb_any(skb);
+ goto term_cmd;
+ }
+
+ if ((pkt_type != MWIFIEX_TYPE_CMD) &&
+ (pkt_type != MWIFIEX_TYPE_EVENT))
+ dev_err(adapter->dev,
+ "%s:Received wrong packet on cmd port",
+ __func__);
+
+ mwifiex_decode_rx_packet(adapter, skb, pkt_type);
+ }
+
if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
- card->mp_wr_bitmap = ((u16) card->mp_regs[WR_BITMAP_U]) << 8;
- card->mp_wr_bitmap |= (u16) card->mp_regs[WR_BITMAP_L];
- dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%04x\n",
+ bitmap = (u32) card->mp_regs[reg->wr_bitmap_l];
+ bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
+ if (card->supports_sdio_new_mode) {
+ bitmap |=
+ ((u32) card->mp_regs[reg->wr_bitmap_1l]) << 16;
+ bitmap |=
+ ((u32) card->mp_regs[reg->wr_bitmap_1u]) << 24;
+ }
+ card->mp_wr_bitmap = bitmap;
+
+ dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%x\n",
card->mp_wr_bitmap);
if (adapter->data_sent &&
(card->mp_wr_bitmap & card->mp_data_port_mask)) {
@@ -1200,11 +1361,11 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
/* As firmware will not generate download ready interrupt if the port
updated is command port only, cmd_sent should be done for any SDIO
interrupt. */
- if (adapter->cmd_sent) {
+ if (card->has_control_mask && adapter->cmd_sent) {
/* Check if firmware has attach buffer at command port and
update just that in wr_bit_map. */
card->mp_wr_bitmap |=
- (u16) card->mp_regs[WR_BITMAP_L] & CTRL_PORT_MASK;
+ (u32) card->mp_regs[reg->wr_bitmap_l] & CTRL_PORT_MASK;
if (card->mp_wr_bitmap & CTRL_PORT_MASK)
adapter->cmd_sent = false;
}
@@ -1212,9 +1373,16 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
adapter->cmd_sent, adapter->data_sent);
if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
- card->mp_rd_bitmap = ((u16) card->mp_regs[RD_BITMAP_U]) << 8;
- card->mp_rd_bitmap |= (u16) card->mp_regs[RD_BITMAP_L];
- dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%04x\n",
+ bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
+ bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+ if (card->supports_sdio_new_mode) {
+ bitmap |=
+ ((u32) card->mp_regs[reg->rd_bitmap_1l]) << 16;
+ bitmap |=
+ ((u32) card->mp_regs[reg->rd_bitmap_1u]) << 24;
+ }
+ card->mp_rd_bitmap = bitmap;
+ dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%x\n",
card->mp_rd_bitmap);
while (true) {
@@ -1224,8 +1392,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
"info: no more rd_port available\n");
break;
}
- len_reg_l = RD_LEN_P0_L + (port << 1);
- len_reg_u = RD_LEN_P0_U + (port << 1);
+ len_reg_l = reg->rd_len_p0_l + (port << 1);
+ len_reg_u = reg->rd_len_p0_u + (port << 1);
rx_len = ((u16) card->mp_regs[len_reg_u]) << 8;
rx_len |= (u16) card->mp_regs[len_reg_l];
dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n",
@@ -1257,37 +1425,33 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb,
port)) {
- u32 cr = 0;
-
dev_err(adapter->dev, "card_to_host_mpa failed:"
" int status=%#x\n", sdio_ireg);
- if (mwifiex_read_reg(adapter,
- CONFIGURATION_REG, &cr))
- dev_err(adapter->dev,
- "read CFG reg failed\n");
-
- dev_dbg(adapter->dev,
- "info: CFG reg val = %d\n", cr);
- if (mwifiex_write_reg(adapter,
- CONFIGURATION_REG,
- (cr | 0x04)))
- dev_err(adapter->dev,
- "write CFG reg failed\n");
-
- dev_dbg(adapter->dev, "info: write success\n");
- if (mwifiex_read_reg(adapter,
- CONFIGURATION_REG, &cr))
- dev_err(adapter->dev,
- "read CFG reg failed\n");
-
- dev_dbg(adapter->dev,
- "info: CFG reg val =%x\n", cr);
- return -1;
+ goto term_cmd;
}
}
}
return 0;
+
+term_cmd:
+ /* terminate cmd */
+ if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+ dev_err(adapter->dev, "read CFG reg failed\n");
+ else
+ dev_dbg(adapter->dev, "info: CFG reg val = %d\n", cr);
+
+ if (mwifiex_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04)))
+ dev_err(adapter->dev, "write CFG reg failed\n");
+ else
+ dev_dbg(adapter->dev, "info: write success\n");
+
+ if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+ dev_err(adapter->dev, "read CFG reg failed\n");
+ else
+ dev_dbg(adapter->dev, "info: CFG reg val =%x\n", cr);
+
+ return -1;
}
/*
@@ -1305,7 +1469,7 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
* and return.
*/
static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
- u8 *payload, u32 pkt_len, u8 port,
+ u8 *payload, u32 pkt_len, u32 port,
u32 next_pkt_len)
{
struct sdio_mmc_card *card = adapter->card;
@@ -1314,8 +1478,11 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
s32 f_send_cur_buf = 0;
s32 f_precopy_cur_buf = 0;
s32 f_postcopy_cur_buf = 0;
+ u32 mport;
- if ((!card->mpa_tx.enabled) || (port == CTRL_PORT)) {
+ if (!card->mpa_tx.enabled ||
+ (card->has_control_mask && (port == CTRL_PORT)) ||
+ (card->supports_sdio_new_mode && (port == CMD_PORT_SLCT))) {
dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n",
__func__);
@@ -1329,7 +1496,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
__func__);
if (MP_TX_AGGR_IN_PROGRESS(card)) {
- if (!MP_TX_AGGR_PORT_LIMIT_REACHED(card) &&
+ if (!mp_tx_aggr_port_limit_reached(card) &&
MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
f_precopy_cur_buf = 1;
@@ -1342,7 +1509,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
/* No room in Aggr buf, send it */
f_send_aggr_buf = 1;
- if (MP_TX_AGGR_PORT_LIMIT_REACHED(card) ||
+ if (mp_tx_aggr_port_limit_reached(card) ||
!(card->mp_wr_bitmap &
(1 << card->curr_wr_port)))
f_send_cur_buf = 1;
@@ -1381,7 +1548,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) ||
- MP_TX_AGGR_PORT_LIMIT_REACHED(card))
+ mp_tx_aggr_port_limit_reached(card))
/* No more pkts allowed in Aggr buf, send it */
f_send_aggr_buf = 1;
}
@@ -1390,11 +1557,28 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
__func__,
card->mpa_tx.start_port, card->mpa_tx.ports);
+ if (card->supports_sdio_new_mode) {
+ u32 port_count;
+ int i;
+
+ for (i = 0, port_count = 0; i < card->max_ports; i++)
+ if (card->mpa_tx.ports & BIT(i))
+ port_count++;
+
+ /* Writing data from "start_port + 0" to "start_port +
+ * port_count -1", so decrease the count by 1
+ */
+ port_count--;
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+ (port_count << 8)) + card->mpa_tx.start_port;
+ } else {
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+ (card->mpa_tx.ports << 4)) +
+ card->mpa_tx.start_port;
+ }
+
ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
- card->mpa_tx.buf_len,
- (adapter->ioport | 0x1000 |
- (card->mpa_tx.ports << 4)) +
- card->mpa_tx.start_port);
+ card->mpa_tx.buf_len, mport);
MP_TX_AGGR_BUF_RESET(card);
}
@@ -1434,7 +1618,7 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
int ret;
u32 buf_block_len;
u32 blk_size;
- u8 port = CTRL_PORT;
+ u32 port = CTRL_PORT;
u8 *payload = (u8 *)skb->data;
u32 pkt_len = skb->len;
@@ -1465,6 +1649,9 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
pkt_len > MWIFIEX_UPLD_SIZE)
dev_err(adapter->dev, "%s: payload=%p, nb=%d\n",
__func__, payload, pkt_len);
+
+ if (card->supports_sdio_new_mode)
+ port = CMD_PORT_SLCT;
}
/* Transfer data to card */
@@ -1586,18 +1773,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
adapter->dev = &func->dev;
- switch (func->device) {
- case SDIO_DEVICE_ID_MARVELL_8786:
- strcpy(adapter->fw_name, SD8786_DEFAULT_FW_NAME);
- break;
- case SDIO_DEVICE_ID_MARVELL_8797:
- strcpy(adapter->fw_name, SD8797_DEFAULT_FW_NAME);
- break;
- case SDIO_DEVICE_ID_MARVELL_8787:
- default:
- strcpy(adapter->fw_name, SD8787_DEFAULT_FW_NAME);
- break;
- }
+ strcpy(adapter->fw_name, card->firmware);
return 0;
@@ -1626,8 +1802,9 @@ disable_func:
static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret;
- u32 sdio_ireg;
+ u8 sdio_ireg;
/*
* Read the HOST_INT_STATUS_REG for ACK the first interrupt got
@@ -1645,30 +1822,35 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
/* Initialize SDIO variables in card */
card->mp_rd_bitmap = 0;
card->mp_wr_bitmap = 0;
- card->curr_rd_port = 1;
- card->curr_wr_port = 1;
+ card->curr_rd_port = reg->start_rd_port;
+ card->curr_wr_port = reg->start_wr_port;
- card->mp_data_port_mask = DATA_PORT_MASK;
+ card->mp_data_port_mask = reg->data_port_mask;
card->mpa_tx.buf_len = 0;
card->mpa_tx.pkt_cnt = 0;
card->mpa_tx.start_port = 0;
card->mpa_tx.enabled = 1;
- card->mpa_tx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+ card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit;
card->mpa_rx.buf_len = 0;
card->mpa_rx.pkt_cnt = 0;
card->mpa_rx.start_port = 0;
card->mpa_rx.enabled = 1;
- card->mpa_rx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+ card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit;
/* Allocate buffers for SDIO MP-A */
- card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL);
+ card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL);
if (!card->mp_regs)
return -ENOMEM;
+ /* Allocate skb pointer buffers */
+ card->mpa_rx.skb_arr = kzalloc((sizeof(void *)) *
+ card->mp_agg_pkt_limit, GFP_KERNEL);
+ card->mpa_rx.len_arr = kzalloc(sizeof(*card->mpa_rx.len_arr) *
+ card->mp_agg_pkt_limit, GFP_KERNEL);
ret = mwifiex_alloc_sdio_mpa_buffers(adapter,
SDIO_MP_TX_AGGR_DEF_BUF_SIZE,
SDIO_MP_RX_AGGR_DEF_BUF_SIZE);
@@ -1705,6 +1887,8 @@ static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter)
struct sdio_mmc_card *card = adapter->card;
kfree(card->mp_regs);
+ kfree(card->mpa_rx.skb_arr);
+ kfree(card->mpa_rx.len_arr);
kfree(card->mpa_tx.buf);
kfree(card->mpa_rx.buf);
}
@@ -1716,16 +1900,20 @@ static void
mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int i;
card->mp_end_port = port;
- card->mp_data_port_mask = DATA_PORT_MASK;
+ card->mp_data_port_mask = reg->data_port_mask;
- for (i = 1; i <= MAX_PORT - card->mp_end_port; i++)
- card->mp_data_port_mask &= ~(1 << (MAX_PORT - i));
+ if (reg->start_wr_port) {
+ for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
+ card->mp_data_port_mask &=
+ ~(1 << (card->max_ports - i));
+ }
- card->curr_wr_port = 1;
+ card->curr_wr_port = reg->start_wr_port;
dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n",
port, card->mp_data_port_mask);
@@ -1831,3 +2019,4 @@ MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);