diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/sta_rx.c')
-rw-r--r-- | drivers/net/wireless/mwifiex/sta_rx.c | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c new file mode 100644 index 00000000000..8282679e64f --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_rx.c @@ -0,0 +1,182 @@ +/* + * Marvell Wireless LAN device driver: station RX data handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "11n_aggr.h" +#include "11n_rxreorder.h" + +/* + * This function processes the received packet and forwards it + * to kernel/upper layer. + * + * This function parses through the received packet and determines + * if it is a debug packet or normal packet. + * + * For non-debug packets, the function chops off unnecessary leading + * header bytes, reconstructs the packet as an ethernet frame or + * 802.2/llc/snap frame as required, and sends it to kernel/upper layer. + * + * The completion callback is called after processing in complete. + */ +int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + int ret = 0; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct mwifiex_private *priv = adapter->priv[rx_info->bss_index]; + struct rx_packet_hdr *rx_pkt_hdr; + struct rxpd *local_rx_pd; + int hdr_chop; + struct ethhdr *eth_hdr; + u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; + + local_rx_pd = (struct rxpd *) (skb->data); + + rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + + local_rx_pd->rx_pkt_offset); + + if (!memcmp(&rx_pkt_hdr->rfc1042_hdr, + rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) { + /* + * Replace the 803 header and rfc1042 header (llc/snap) with an + * EthernetII header, keep the src/dst and snap_type + * (ethertype). + * The firmware only passes up SNAP frames converting + * all RX Data from 802.11 to 802.2/LLC/SNAP frames. + * To create the Ethernet II, just move the src, dst address + * right before the snap_type. + */ + eth_hdr = (struct ethhdr *) + ((u8 *) &rx_pkt_hdr->eth803_hdr + + sizeof(rx_pkt_hdr->eth803_hdr) + + sizeof(rx_pkt_hdr->rfc1042_hdr) + - sizeof(rx_pkt_hdr->eth803_hdr.h_dest) + - sizeof(rx_pkt_hdr->eth803_hdr.h_source) + - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type)); + + memcpy(eth_hdr->h_source, rx_pkt_hdr->eth803_hdr.h_source, + sizeof(eth_hdr->h_source)); + memcpy(eth_hdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest, + sizeof(eth_hdr->h_dest)); + + /* Chop off the rxpd + the excess memory from the 802.2/llc/snap + header that was removed. */ + hdr_chop = (u8 *) eth_hdr - (u8 *) local_rx_pd; + } else { + /* Chop off the rxpd */ + hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr - + (u8 *) local_rx_pd; + } + + /* Chop off the leading header bytes so the it points to the start of + either the reconstructed EthII frame or the 802.2/llc/snap frame */ + skb_pull(skb, hdr_chop); + + priv->rxpd_rate = local_rx_pd->rx_rate; + + priv->rxpd_htinfo = local_rx_pd->ht_info; + + ret = mwifiex_recv_packet(adapter, skb); + if (ret == -1) + dev_err(adapter->dev, "recv packet failed\n"); + + return ret; +} + +/* + * This function processes the received buffer. + * + * The function looks into the RxPD and performs sanity tests on the + * received buffer to ensure its a valid packet, before processing it + * further. If the packet is determined to be aggregated, it is + * de-aggregated accordingly. Non-unicast packets are sent directly to + * the kernel/upper layers. Unicast packets are handed over to the + * Rx reordering routine if 11n is enabled. + * + * The completion callback is called after processing in complete. + */ +int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + int ret = 0; + struct rxpd *local_rx_pd; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct rx_packet_hdr *rx_pkt_hdr; + u8 ta[ETH_ALEN]; + u16 rx_pkt_type = 0; + struct mwifiex_private *priv = adapter->priv[rx_info->bss_index]; + + local_rx_pd = (struct rxpd *) (skb->data); + rx_pkt_type = local_rx_pd->rx_pkt_type; + + rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + + local_rx_pd->rx_pkt_offset); + + if ((local_rx_pd->rx_pkt_offset + local_rx_pd->rx_pkt_length) > + (u16) skb->len) { + dev_err(adapter->dev, "wrong rx packet: len=%d," + " rx_pkt_offset=%d, rx_pkt_length=%d\n", skb->len, + local_rx_pd->rx_pkt_offset, local_rx_pd->rx_pkt_length); + priv->stats.rx_dropped++; + dev_kfree_skb_any(skb); + return ret; + } + if (local_rx_pd->rx_pkt_type == PKT_TYPE_AMSDU) { + mwifiex_11n_deaggregate_pkt(priv, skb); + return ret; + } + /* + * If the packet is not an unicast packet then send the packet + * directly to os. Don't pass thru rx reordering + */ + if (!IS_11N_ENABLED(priv) || + memcmp(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN)) { + mwifiex_process_rx_packet(adapter, skb); + return ret; + } + + if (mwifiex_queuing_ra_based(priv)) { + memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN); + } else { + if (rx_pkt_type != PKT_TYPE_BAR) + priv->rx_seq[local_rx_pd->priority] = + local_rx_pd->seq_num; + memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address, + ETH_ALEN); + } + + /* Reorder and send to OS */ + ret = mwifiex_11n_rx_reorder_pkt(priv, local_rx_pd->seq_num, + local_rx_pd->priority, ta, + (u8) local_rx_pd->rx_pkt_type, + (void *) skb); + + if (ret || (rx_pkt_type == PKT_TYPE_BAR)) { + if (priv && (ret == -1)) + priv->stats.rx_dropped++; + + dev_kfree_skb_any(skb); + } + + return ret; +} |