summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/orinoco_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/orinoco_pci.c')
-rw-r--r--drivers/net/wireless/orinoco_pci.c210
1 files changed, 38 insertions, 172 deletions
diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
index 5362c214fc8..1c105f40f8d 100644
--- a/drivers/net/wireless/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco_pci.c
@@ -1,11 +1,11 @@
/* orinoco_pci.c
*
- * Driver for Prism II devices that have a direct PCI interface
- * (i.e., not in a Pcmcia or PLX bridge)
- *
- * Specifically here we're talking about the Linksys WMP11
+ * Driver for Prism 2.5/3 devices that have a direct PCI interface
+ * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
+ * The card contains only one PCI region, which contains all the usual
+ * hermes registers, as well as the COR register.
*
- * Current maintainers (as of 29 September 2003) are:
+ * Current maintainers are:
* Pavel Roskin <proski AT gnu.org>
* and David Gibson <hermes AT gibson.dropbear.id.au>
*
@@ -41,54 +41,6 @@
* under either the MPL or the GPL.
*/
-/*
- * Theory of operation...
- * -------------------
- * Maybe you had a look in orinoco_plx. Well, this is totally different...
- *
- * The card contains only one PCI region, which contains all the usual
- * hermes registers.
- *
- * The driver will memory map this region in normal memory. Because
- * the hermes registers are mapped in normal memory and not in ISA I/O
- * post space, we can't use the usual inw/outw macros and we need to
- * use readw/writew.
- * This slight difference force us to compile our own version of
- * hermes.c with the register access macro changed. That's a bit
- * hackish but works fine.
- *
- * Note that the PCI region is pretty big (4K). That's much more than
- * the usual set of hermes register (0x0 -> 0x3E). I've got a strong
- * suspicion that the whole memory space of the adapter is in fact in
- * this region. Accessing directly the adapter memory instead of going
- * through the usual register would speed up significantely the
- * operations...
- *
- * Finally, the card looks like this :
------------------------
- Bus 0, device 14, function 0:
- Network controller: PCI device 1260:3873 (Harris Semiconductor) (rev 1).
- IRQ 11.
- Master Capable. Latency=248.
- Prefetchable 32 bit memory at 0xffbcc000 [0xffbccfff].
------------------------
-00:0e.0 Network controller: Harris Semiconductor: Unknown device 3873 (rev 01)
- Subsystem: Unknown device 1737:3874
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
- Latency: 248 set, cache line size 08
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at ffbcc000 (32-bit, prefetchable) [size=4K]
- Capabilities: [dc] Power Management version 2
- Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
------------------------
- *
- * That's all..
- *
- * Jean II
- */
-
#define DRIVER_NAME "orinoco_pci"
#define PFX DRIVER_NAME ": "
@@ -100,12 +52,14 @@
#include <linux/pci.h>
#include "orinoco.h"
+#include "orinoco_pci.h"
-/* All the magic there is from wlan-ng */
-/* Magic offset of the reset register of the PCI card */
+/* Offset of the COR register of the PCI card */
#define HERMES_PCI_COR (0x26)
-/* Magic bitmask to reset the card */
+
+/* Bitmask to reset the card */
#define HERMES_PCI_COR_MASK (0x0080)
+
/* Magic timeouts for doing the reset.
* Those times are straight from wlan-ng, and it is claimed that they
* are necessary. Alan will kill me. Take your time and grab a coffee. */
@@ -113,13 +67,8 @@
#define HERMES_PCI_COR_OFFT (500) /* ms */
#define HERMES_PCI_COR_BUSYT (500) /* ms */
-/* Orinoco PCI specific data */
-struct orinoco_pci_card {
- void __iomem *pci_ioaddr;
-};
-
/*
- * Do a soft reset of the PCI card using the Configuration Option Register
+ * Do a soft reset of the card using the Configuration Option Register
* We need this to get going...
* This is the part of the code that is strongly inspired from wlan-ng
*
@@ -131,14 +80,13 @@ struct orinoco_pci_card {
* Note bis : Don't try to access HERMES_CMD during the reset phase.
* It just won't work !
*/
-static int
-orinoco_pci_cor_reset(struct orinoco_private *priv)
+static int orinoco_pci_cor_reset(struct orinoco_private *priv)
{
hermes_t *hw = &priv->hw;
- unsigned long timeout;
- u16 reg;
+ unsigned long timeout;
+ u16 reg;
- /* Assert the reset until the card notice */
+ /* Assert the reset until the card notices */
hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
mdelay(HERMES_PCI_COR_ONT);
@@ -163,19 +111,14 @@ orinoco_pci_cor_reset(struct orinoco_private *priv)
return 0;
}
-/*
- * Initialise a card. Mostly similar to PLX code.
- */
static int orinoco_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int err = 0;
- unsigned long pci_iorange;
- u16 __iomem *pci_ioaddr = NULL;
- unsigned long pci_iolen;
- struct orinoco_private *priv = NULL;
+ int err;
+ struct orinoco_private *priv;
struct orinoco_pci_card *card;
- struct net_device *dev = NULL;
+ struct net_device *dev;
+ void __iomem *hermes_io;
err = pci_enable_device(pdev);
if (err) {
@@ -184,39 +127,32 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
}
err = pci_request_regions(pdev, DRIVER_NAME);
- if (err != 0) {
+ if (err) {
printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
goto fail_resources;
}
- /* Resource 0 is mapped to the hermes registers */
- pci_iorange = pci_resource_start(pdev, 0);
- pci_iolen = pci_resource_len(pdev, 0);
- pci_ioaddr = ioremap(pci_iorange, pci_iolen);
- if (!pci_iorange) {
- printk(KERN_ERR PFX "Cannot remap hardware registers\n");
- goto fail_map;
+ hermes_io = pci_iomap(pdev, 0, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot remap chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
}
/* Allocate network device */
dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset);
- if (! dev) {
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
}
priv = netdev_priv(dev);
card = priv->card;
- card->pci_ioaddr = pci_ioaddr;
- dev->mem_start = pci_iorange;
- dev->mem_end = pci_iorange + pci_iolen - 1;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- hermes_struct_init(&priv->hw, pci_ioaddr, HERMES_32BIT_REGSPACING);
-
- printk(KERN_DEBUG PFX "Detected device %s, mem:0x%lx-0x%lx, irq %d\n",
- pci_name(pdev), dev->mem_start, dev->mem_end, pdev->irq);
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
dev->name, dev);
@@ -225,9 +161,7 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
err = -EBUSY;
goto fail_irq;
}
- dev->irq = pdev->irq;
- /* Perform a COR reset to start the card */
err = orinoco_pci_cor_reset(priv);
if (err) {
printk(KERN_ERR PFX "Initial reset failed\n");
@@ -236,11 +170,13 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "Failed to register net device\n");
+ printk(KERN_ERR PFX "Cannot register network device\n");
goto fail;
}
pci_set_drvdata(pdev, dev);
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+ pci_name(pdev));
return 0;
@@ -252,9 +188,9 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
free_orinocodev(dev);
fail_alloc:
- iounmap(pci_ioaddr);
+ pci_iounmap(pdev, hermes_io);
- fail_map:
+ fail_map_hermes:
pci_release_regions(pdev);
fail_resources:
@@ -267,87 +203,17 @@ static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pci_card *card = priv->card;
unregister_netdev(dev);
- free_irq(dev->irq, dev);
+ free_irq(pdev->irq, dev);
pci_set_drvdata(pdev, NULL);
free_orinocodev(dev);
- iounmap(card->pci_ioaddr);
+ pci_iounmap(pdev, priv->hw.iobase);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
-static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
-
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: hw_unavailable on orinoco_pci_suspend\n",
- dev->name);
- return err;
- }
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: orinoco_pci_suspend(): Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
- orinoco_unlock(priv, &flags);
-
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-static int orinoco_pci_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- printk(KERN_DEBUG "%s: Orinoco-PCI waking up\n", dev->name);
-
- pci_set_power_state(pdev, 0);
- pci_restore_state(pdev);
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware on orinoco_pci_resume()\n",
- dev->name, err);
- return err;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on orinoco_pci_resume()\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static struct pci_device_id orinoco_pci_pci_id_table[] = {
+static struct pci_device_id orinoco_pci_id_table[] = {
/* Intersil Prism 3 */
{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
/* Intersil Prism 2.5 */
@@ -357,11 +223,11 @@ static struct pci_device_id orinoco_pci_pci_id_table[] = {
{0,},
};
-MODULE_DEVICE_TABLE(pci, orinoco_pci_pci_id_table);
+MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
static struct pci_driver orinoco_pci_driver = {
.name = DRIVER_NAME,
- .id_table = orinoco_pci_pci_id_table,
+ .id_table = orinoco_pci_id_table,
.probe = orinoco_pci_init_one,
.remove = __devexit_p(orinoco_pci_remove_one),
.suspend = orinoco_pci_suspend,