diff options
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_sdio.h')
| -rw-r--r-- | drivers/net/wireless/rsi/rsi_sdio.h | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h new file mode 100644 index 00000000000..df4b5e20e05 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_sdio.h @@ -0,0 +1,129 @@ +/** + * @section LICENSE + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#ifndef __RSI_SDIO_INTF__ +#define __RSI_SDIO_INTF__ + +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio_ids.h> +#include "rsi_main.h" + +enum sdio_interrupt_type { + BUFFER_FULL = 0x0, + BUFFER_AVAILABLE = 0x1, + FIRMWARE_ASSERT_IND = 0x3, + MSDU_PACKET_PENDING = 0x4, + UNKNOWN_INT = 0XE +}; + +/* Buffer status register related info */ +#define PKT_BUFF_SEMI_FULL 0 +#define PKT_BUFF_FULL 1 +#define PKT_MGMT_BUFF_FULL 2 +#define MSDU_PKT_PENDING 3 +/* Interrupt Bit Related Macros */ +#define PKT_BUFF_AVAILABLE 0 +#define FW_ASSERT_IND 2 + +#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3 +#define RSI_FN1_INT_REGISTER 0xf9 +#define RSI_SD_REQUEST_MASTER 0x10000 + +/* FOR SD CARD ONLY */ +#define SDIO_RX_NUM_BLOCKS_REG 0x000F1 +#define SDIO_FW_STATUS_REG 0x000F2 +#define SDIO_NXT_RD_DELAY2 0x000F5 +#define SDIO_MASTER_ACCESS_MSBYTE 0x000FA +#define SDIO_MASTER_ACCESS_LSBYTE 0x000FB +#define SDIO_READ_START_LVL 0x000FC +#define SDIO_READ_FIFO_CTL 0x000FD +#define SDIO_WRITE_FIFO_CTL 0x000FE +#define SDIO_FUN1_INTR_CLR_REG 0x0008 +#define SDIO_REG_HIGH_SPEED 0x0013 + +#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE) \ + { \ + TYPE = \ + (_I & (1 << PKT_BUFF_AVAILABLE)) ? \ + BUFFER_AVAILABLE : \ + (_I & (1 << MSDU_PKT_PENDING)) ? \ + MSDU_PACKET_PENDING : \ + (_I & (1 << FW_ASSERT_IND)) ? \ + FIRMWARE_ASSERT_IND : UNKNOWN_INT; \ + } + +/* common registers in SDIO function1 */ +#define TA_SOFT_RESET_REG 0x0004 +#define TA_TH0_PC_REG 0x0400 +#define TA_HOLD_THREAD_REG 0x0844 +#define TA_RELEASE_THREAD_REG 0x0848 + +#define TA_SOFT_RST_CLR 0 +#define TA_SOFT_RST_SET BIT(0) +#define TA_PC_ZERO 0 +#define TA_HOLD_THREAD_VALUE cpu_to_le32(0xF) +#define TA_RELEASE_THREAD_VALUE cpu_to_le32(0xF) +#define TA_BASE_ADDR 0x2200 +#define MISC_CFG_BASE_ADDR 0x4150 + +struct receive_info { + bool buffer_full; + bool semi_buffer_full; + bool mgmt_buffer_full; + u32 mgmt_buf_full_counter; + u32 buf_semi_full_counter; + u8 watch_bufferfull_count; + u32 sdio_intr_status_zero; + u32 sdio_int_counter; + u32 total_sdio_msdu_pending_intr; + u32 total_sdio_unknown_intr; + u32 buf_full_counter; + u32 buf_avilable_counter; +}; + +struct rsi_91x_sdiodev { + struct sdio_func *pfunction; + struct task_struct *in_sdio_litefi_irq; + struct receive_info rx_info; + u32 next_read_delay; + u32 sdio_high_speed_enable; + u8 sdio_clock_speed; + u32 cardcapability; + u8 prev_desc[16]; + u32 tx_blk_size; + u8 write_fail; +}; + +void rsi_interrupt_handler(struct rsi_hw *adapter); +int rsi_init_sdio_slave_regs(struct rsi_hw *adapter); +int rsi_sdio_device_init(struct rsi_common *common); +int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data); +int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length); +int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function, + u32 addr, u8 *data); +int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr, + u8 *data, u32 count); +void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit); +int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter); +int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num); +#endif |