diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 166 |
1 files changed, 36 insertions, 130 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index f08b6a37bf2..7d4778d66e7 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -616,67 +616,13 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, static int rt2800pci_write_tx_data(struct queue_entry* entry, struct txentry_desc *txdesc) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct sk_buff *skb = entry->skb; - struct skb_frame_desc *skbdesc; int ret; - __le32 *txwi; - u32 word; ret = rt2x00pci_write_tx_data(entry, txdesc); if (ret) return ret; - skbdesc = get_skb_frame_desc(skb); - txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom); - - /* - * Initialize TX Info descriptor - */ - rt2x00_desc_read(txwi, 0, &word); - rt2x00_set_field32(&word, TXWI_W0_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); - rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); - rt2x00_set_field32(&word, TXWI_W0_TS, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_AMPDU, - test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); - rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); - rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); - rt2x00_set_field32(&word, TXWI_W0_BW, - test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, - test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); - rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); - rt2x00_desc_write(txwi, 0, word); - - rt2x00_desc_read(txwi, 1, &word); - rt2x00_set_field32(&word, TXWI_W1_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W1_NSEQ, - test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); - rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, - test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - txdesc->key_idx : 0xff); - rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, - txdesc->length); - rt2x00_set_field32(&word, TXWI_W1_PACKETID, - skbdesc->entry->queue->qid + 1); - rt2x00_desc_write(txwi, 1, word); - - /* - * Always write 0 to IV/EIV fields, hardware will insert the IV - * from the IVEIV register when TXD_W3_WIV is set to 0. - * When TXD_W3_WIV is set to 1 it will use the IV data - * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which - * crypto entry in the registers should be used to encrypt the frame. - */ - _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); - _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); + rt2800_write_txwi(entry->skb, txdesc); return 0; } @@ -732,10 +678,10 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ -static void rt2800pci_write_beacon(struct queue_entry *entry) +static void rt2800pci_write_beacon(struct queue_entry *entry, + struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; @@ -748,15 +694,25 @@ static void rt2800pci_write_beacon(struct queue_entry *entry) rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* - * Write entire beacon with descriptor to register. + * Add the TXWI for the beacon to the skb. + */ + rt2800_write_txwi(entry->skb, txdesc); + skb_push(entry->skb, TXWI_DESC_SIZE); + + /* + * Write entire beacon with TXWI to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2800_register_multiwrite(rt2x00dev, - beacon_base, - skbdesc->desc, skbdesc->desc_len); - rt2800_register_multiwrite(rt2x00dev, - beacon_base + skbdesc->desc_len, - entry->skb->data, entry->skb->len); + rt2800_register_multiwrite(rt2x00dev, beacon_base, + entry->skb->data, entry->skb->len); + + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Clean up beacon skb. @@ -770,18 +726,6 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, { struct data_queue *queue; unsigned int idx, qidx = 0; - u32 reg; - - if (queue_idx == QID_BEACON) { - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - return; - } if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) return; @@ -824,34 +768,21 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *rxd = entry_priv->desc; - __le32 *rxwi = (__le32 *)entry->skb->data; - u32 rxd3; - u32 rxwi0; - u32 rxwi1; - u32 rxwi2; - u32 rxwi3; - - rt2x00_desc_read(rxd, 3, &rxd3); - rt2x00_desc_read(rxwi, 0, &rxwi0); - rt2x00_desc_read(rxwi, 1, &rxwi1); - rt2x00_desc_read(rxwi, 2, &rxwi2); - rt2x00_desc_read(rxwi, 3, &rxwi3); - - if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR)) + u32 word; + + rt2x00_desc_read(rxd, 3, &word); + + if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { - /* - * Unfortunately we don't know the cipher type used during - * decryption. This prevents us from correct providing - * correct statistics through debugfs. - */ - rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); - rxdesc->cipher_status = - rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); - } + /* + * Unfortunately we don't know the cipher type used during + * decryption. This prevents us from correct providing + * correct statistics through debugfs. + */ + rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR); - if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) { + if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) { /* * Hardware has stripped IV/EIV data from 802.11 frame during * decryption. Unfortunately the descriptor doesn't contain @@ -866,47 +797,22 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, rxdesc->flags |= RX_FLAG_MMIC_ERROR; } - if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS)) + if (rt2x00_get_field32(word, RXD_W3_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; - if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) + if (rt2x00_get_field32(word, RXD_W3_L2PAD)) rxdesc->dev_flags |= RXDONE_L2PAD; - if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) - rxdesc->flags |= RX_FLAG_SHORT_GI; - - if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) - rxdesc->flags |= RX_FLAG_40MHZ; - - /* - * Detect RX rate, always use MCS as signal type. - */ - rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; - rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); - rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); - /* - * Mask of 0x8 bit to remove the short preamble flag. + * Process the RXWI structure that is at the start of the buffer. */ - if (rxdesc->rate_mode == RATE_MODE_CCK) - rxdesc->signal &= ~0x8; - - rxdesc->rssi = - (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + - rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; - - rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + rt2800_process_rxwi(entry->skb, rxdesc); /* * Set RX IDX in register to inform hardware that we have handled * this entry and it is available for reuse again. */ rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); - - /* - * Remove TXWI descriptor from start of buffer. - */ - skb_pull(entry->skb, RXWI_DESC_SIZE); } /* |