diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 400 |
1 files changed, 173 insertions, 227 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 39b3846fa34..b2673953598 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> @@ -196,8 +196,6 @@ static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); - /* * enable Host program ram write selection */ @@ -243,6 +241,7 @@ static void rt2800pci_clear_entry(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; u32 word; if (entry->queue->qid == QID_RX) { @@ -253,6 +252,13 @@ static void rt2800pci_clear_entry(struct queue_entry *entry) rt2x00_desc_read(entry_priv->desc, 1, &word); rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); rt2x00_desc_write(entry_priv->desc, 1, word); + + /* + * Set RX IDX in register to inform hardware that we have + * handled this entry and it is available for reuse again. + */ + rt2800_register_write(rt2x00dev, RX_CRX_IDX, + entry->entry_idx); } else { rt2x00_desc_read(entry_priv->desc, 1, &word); rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); @@ -344,24 +350,24 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, } rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); - rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0); rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, 0); + rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, 0); + rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, 0); rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); - rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); - rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, 0); + rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0); rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); } @@ -399,78 +405,18 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - u16 word; - - /* - * Initialize all registers. - */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800pci_init_queues(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + rt2800pci_init_queues(rt2x00dev))) return -EIO; - /* - * Send signal to firmware during boot time. - */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - - /* - * Enable RX. - */ - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - /* - * Initialize LED control - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, - word & 0xff, (word >> 8) & 0xff); - - return 0; + return rt2800_enable_radio(rt2x00dev); } static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_disable_radio(rt2x00dev); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); @@ -486,9 +432,6 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); - - /* Wait for DMA, ignore error */ - rt2800_wait_wpdma_ready(rt2x00dev); } static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -566,21 +509,16 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2800pci_write_tx_data(struct queue_entry* entry, - struct txentry_desc *txdesc) +static __le32 *rt2800pci_get_txwi(struct queue_entry *entry) { - __le32 *txwi = (__le32 *) entry->skb->data; - - rt2800_write_txwi(txwi, txdesc); + return (__le32 *) entry->skb->data; } - -static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2800pci_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *txd = entry_priv->desc; u32 word; @@ -600,7 +538,7 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 0, word); rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); + rt2x00_set_field32(&word, TXD_W1_SD_LEN1, entry->skb->len); rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BURST, @@ -631,41 +569,35 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ -static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue_idx) +static void rt2800pci_kick_tx_queue(struct data_queue *queue) { - struct data_queue *queue; - unsigned int idx, qidx = 0; + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); + unsigned int qidx; - if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) - return; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - idx = queue->index[Q_INDEX]; - - if (queue_idx == QID_MGMT) + if (queue->qid == QID_MGMT) qidx = 5; else - qidx = queue_idx; + qidx = queue->qid; - rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); + rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), entry->entry_idx); } -static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid qid) +static void rt2800pci_kill_tx_queue(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; u32 reg; - if (qid == QID_BEACON) { + if (queue->qid == QID_BEACON) { rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0); return; } rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (queue->qid == QID_AC_BE)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (queue->qid == QID_AC_BK)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (queue->qid == QID_AC_VI)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (queue->qid == QID_AC_VO)); rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); } @@ -675,7 +607,6 @@ static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2800pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; __le32 *rxd = entry_priv->desc; u32 word; @@ -717,127 +648,74 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, * Process the RXWI structure that is at the start of the buffer. */ rt2800_process_rxwi(entry, rxdesc); - - /* - * Set RX IDX in register to inform hardware that we have handled - * this entry and it is available for reuse again. - */ - rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); } /* * Interrupt functions. */ +static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) +{ + struct ieee80211_conf conf = { .flags = 0 }; + struct rt2x00lib_conf libconf = { .conf = &conf }; + + rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); +} + static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; struct queue_entry *entry; - __le32 *txwi; - struct txdone_entry_desc txdesc; - u32 word; - u32 reg; - int wcid, ack, pid, tx_wcid, tx_ack, tx_pid; - u16 mcs, real_mcs; - int i; - - /* - * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO - * at most X times and also stop processing once the TX_STA_FIFO_VALID - * flag is not set anymore. - * - * The legacy drivers use X=TX_RING_SIZE but state in a comment - * that the TX_STA_FIFO stack has a size of 16. We stick to our - * tx ring size for now. - */ - for (i = 0; i < TX_ENTRIES; i++) { - rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); - if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + u32 status; + u8 qid; + + while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) { + /* Now remove the tx status from the FIFO */ + if (kfifo_out(&rt2x00dev->txstatus_fifo, &status, + sizeof(status)) != sizeof(status)) { + WARN_ON(1); break; + } - wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); - ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); - pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); - - /* - * Skip this entry when it contains an invalid - * queue identication number. - */ - if (pid <= 0 || pid > QID_RX) - continue; - - queue = rt2x00queue_get_queue(rt2x00dev, pid - 1); - if (unlikely(!queue)) - continue; - - /* - * Inside each queue, we process each entry in a chronological - * order. We first check that the queue is not empty. - */ - if (rt2x00queue_empty(queue)) - continue; - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - - /* Check if we got a match by looking at WCID/ACK/PID - * fields */ - txwi = (__le32 *) entry->skb->data; - - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); - tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); - - if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) - WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n"); - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - rt2x00_desc_read(txwi, 0, &word); - mcs = rt2x00_get_field32(word, TXWI_W0_MCS); - real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); - - /* - * Ralink has a retry mechanism using a global fallback - * table. We setup this fallback table to try the immediate - * lower rate for all rates. In the TX_STA_FIFO, the MCS field - * always contains the MCS used for the last transmission, be - * it successful or not. - */ - if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) { + qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE); + if (qid >= QID_RX) { /* - * Transmission succeeded. The number of retries is - * mcs - real_mcs + * Unknown queue, this shouldn't happen. Just drop + * this tx status. */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); - } else { + WARNING(rt2x00dev, "Got TX status report with " + "unexpected pid %u, dropping", qid); + break; + } + + queue = rt2x00queue_get_queue(rt2x00dev, qid); + if (unlikely(queue == NULL)) { /* - * Transmission failed. The number of retries is - * always 7 in this case (for a total number of 8 - * frames sent). + * The queue is NULL, this shouldn't happen. Stop + * processing here and drop the tx status */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - txdesc.retry = 7; + WARNING(rt2x00dev, "Got TX status for an unavailable " + "queue %u, dropping", qid); + break; } - /* - * the frame was retried at least once - * -> hw used fallback rates - */ - if (txdesc.retry) - __set_bit(TXDONE_FALLBACK, &txdesc.flags); + if (rt2x00queue_empty(queue)) { + /* + * The queue is empty. Stop processing here + * and drop the tx status. + */ + WARNING(rt2x00dev, "Got TX status for an empty " + "queue %u, dropping", qid); + break; + } - rt2x00lib_txdone(entry, &txdesc); + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + rt2800_txdone_entry(entry, status); } } -static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) +static void rt2800pci_txstatus_tasklet(unsigned long data) { - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; - - rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); + rt2800pci_txdone((struct rt2x00_dev *)data); } static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) @@ -864,13 +742,7 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) rt2x00pci_rxdone(rt2x00dev); /* - * 4 - Tx done interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) - rt2800pci_txdone(rt2x00dev); - - /* - * 5 - Auto wakeup interrupt. + * 4 - Auto wakeup interrupt. */ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) rt2800pci_wakeup(rt2x00dev); @@ -882,10 +754,58 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance) return IRQ_HANDLED; } +static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) +{ + u32 status; + int i; + + /* + * The TX_FIFO_STATUS interrupt needs special care. We should + * read TX_STA_FIFO but we should do it immediately as otherwise + * the register can overflow and we would lose status reports. + * + * Hence, read the TX_STA_FIFO register and copy all tx status + * reports into a kernel FIFO which is handled in the txstatus + * tasklet. We use a tasklet to process the tx status reports + * because we can schedule the tasklet multiple times (when the + * interrupt fires again during tx status processing). + * + * Furthermore we don't disable the TX_FIFO_STATUS + * interrupt here but leave it enabled so that the TX_STA_FIFO + * can also be read while the interrupt thread gets executed. + * + * Since we have only one producer and one consumer we don't + * need to lock the kfifo. + */ + for (i = 0; i < TX_ENTRIES; i++) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, &status); + + if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) + break; + + if (kfifo_is_full(&rt2x00dev->txstatus_fifo)) { + WARNING(rt2x00dev, "TX status FIFO overrun," + " drop tx status report.\n"); + break; + } + + if (kfifo_in(&rt2x00dev->txstatus_fifo, &status, + sizeof(status)) != sizeof(status)) { + WARNING(rt2x00dev, "TX status FIFO overrun," + "drop tx status report.\n"); + break; + } + } + + /* Schedule the tasklet for processing the tx status. */ + tasklet_schedule(&rt2x00dev->txstatus_tasklet); +} + static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) { struct rt2x00_dev *rt2x00dev = dev_instance; u32 reg; + irqreturn_t ret = IRQ_HANDLED; /* Read status and ACK all interrupts */ rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); @@ -897,15 +817,38 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; - /* Store irqvalue for use in the interrupt thread. */ - rt2x00dev->irqvalue[0] = reg; + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) + rt2800pci_txstatus_interrupt(rt2x00dev); - /* Disable interrupts, will be enabled again in the interrupt thread. */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_IRQ_OFF_ISR); + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE) || + rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) { + /* + * All other interrupts are handled in the interrupt thread. + * Store irqvalue for use in the interrupt thread. + */ + rt2x00dev->irqvalue[0] = reg; + + /* + * Disable interrupts, will be enabled again in the + * interrupt thread. + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, + STATE_RADIO_IRQ_OFF_ISR); + + /* + * Leave the TX_FIFO_STATUS interrupt enabled to not lose any + * tx status reports. + */ + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); + ret = IRQ_WAKE_THREAD; + } - return IRQ_WAKE_THREAD; + return ret; } /* @@ -968,6 +911,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags); if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); @@ -1011,11 +955,13 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = { .regbusy_read = rt2x00pci_regbusy_read, .drv_write_firmware = rt2800pci_write_firmware, .drv_init_registers = rt2800pci_init_registers, + .drv_get_txwi = rt2800pci_get_txwi, }; static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .irq_handler = rt2800pci_interrupt, .irq_handler_thread = rt2800pci_interrupt_thread, + .txstatus_tasklet = rt2800pci_txstatus_tasklet, .probe_hw = rt2800pci_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, @@ -1030,7 +976,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800pci_write_tx_desc, - .write_tx_data = rt2800pci_write_tx_data, + .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .kick_tx_queue = rt2800pci_kick_tx_queue, .kill_tx_queue = rt2800pci_kill_tx_queue, |