diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00dev.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 1202 |
1 files changed, 1202 insertions, 0 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c new file mode 100644 index 00000000000..bb6f46cfbb9 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -0,0 +1,1202 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic device routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +/* + * Ring handler. + */ +struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, + const unsigned int queue) +{ + int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); + + /* + * Check if we are requesting a reqular TX ring, + * or if we are requesting a Beacon or Atim ring. + * For Atim rings, we should check if it is supported. + */ + if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) + return &rt2x00dev->tx[queue]; + + if (!rt2x00dev->bcn || !beacon) + return NULL; + + if (queue == IEEE80211_TX_QUEUE_BEACON) + return &rt2x00dev->bcn[0]; + else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + return &rt2x00dev->bcn[1]; + + return NULL; +} +EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); + +/* + * Link tuning handlers + */ +static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt2x00_clear_link(&rt2x00dev->link); + + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev); + + queue_delayed_work(rt2x00dev->hw->workqueue, + &rt2x00dev->link.work, LINK_TUNE_INTERVAL); +} + +static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + cancel_delayed_work_sync(&rt2x00dev->link.work); +} + +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + rt2x00lib_stop_link_tuner(rt2x00dev); + rt2x00lib_start_link_tuner(rt2x00dev); +} + +/* + * Radio control handlers. + */ +int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + int status; + + /* + * Don't enable the radio twice. + * And check if the hardware button has been disabled. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags)) + return 0; + + /* + * Enable radio. + */ + status = rt2x00dev->ops->lib->set_device_state(rt2x00dev, + STATE_RADIO_ON); + if (status) + return status; + + __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); + + /* + * Enable RX. + */ + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + + /* + * Start the TX queues. + */ + ieee80211_start_queues(rt2x00dev->hw); + + return 0; +} + +void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Stop all scheduled work. + */ + if (work_pending(&rt2x00dev->beacon_work)) + cancel_work_sync(&rt2x00dev->beacon_work); + if (work_pending(&rt2x00dev->filter_work)) + cancel_work_sync(&rt2x00dev->filter_work); + if (work_pending(&rt2x00dev->config_work)) + cancel_work_sync(&rt2x00dev->config_work); + + /* + * Stop the TX queues. + */ + ieee80211_stop_queues(rt2x00dev->hw); + + /* + * Disable RX. + */ + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + + /* + * Disable radio. + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); +} + +void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) +{ + /* + * When we are disabling the RX, we should also stop the link tuner. + */ + if (state == STATE_RADIO_RX_OFF) + rt2x00lib_stop_link_tuner(rt2x00dev); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + /* + * When we are enabling the RX, we should also start the link tuner. + */ + if (state == STATE_RADIO_RX_ON && + is_interface_present(&rt2x00dev->interface)) + rt2x00lib_start_link_tuner(rt2x00dev); +} + +static void rt2x00lib_precalculate_link_signal(struct link *link) +{ + if (link->rx_failed || link->rx_success) + link->rx_percentage = + (link->rx_success * 100) / + (link->rx_failed + link->rx_success); + else + link->rx_percentage = 50; + + if (link->tx_failed || link->tx_success) + link->tx_percentage = + (link->tx_success * 100) / + (link->tx_failed + link->tx_success); + else + link->tx_percentage = 50; + + link->rx_success = 0; + link->rx_failed = 0; + link->tx_success = 0; + link->tx_failed = 0; +} + +static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, + int rssi) +{ + int rssi_percentage = 0; + int signal; + + /* + * We need a positive value for the RSSI. + */ + if (rssi < 0) + rssi += rt2x00dev->rssi_offset; + + /* + * Calculate the different percentages, + * which will be used for the signal. + */ + if (rt2x00dev->rssi_offset) + rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset; + + /* + * Add the individual percentages and use the WEIGHT + * defines to calculate the current link signal. + */ + signal = ((WEIGHT_RSSI * rssi_percentage) + + (WEIGHT_TX * rt2x00dev->link.tx_percentage) + + (WEIGHT_RX * rt2x00dev->link.rx_percentage)) / 100; + + return (signal > 100) ? 100 : signal; +} + +static void rt2x00lib_link_tuner(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, link.work.work); + + /* + * When the radio is shutting down we should + * immediately cease all link tuning. + */ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Update statistics. + */ + rt2x00dev->ops->lib->link_stats(rt2x00dev); + + rt2x00dev->low_level_stats.dot11FCSErrorCount += + rt2x00dev->link.rx_failed; + + /* + * Only perform the link tuning when Link tuning + * has been enabled (This could have been disabled from the EEPROM). + */ + if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) + rt2x00dev->ops->lib->link_tuner(rt2x00dev); + + /* + * Precalculate a portion of the link signal which is + * in based on the tx/rx success/failure counters. + */ + rt2x00lib_precalculate_link_signal(&rt2x00dev->link); + + /* + * Increase tuner counter, and reschedule the next link tuner run. + */ + rt2x00dev->link.count++; + queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, + LINK_TUNE_INTERVAL); +} + +static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, filter_work); + unsigned int filter = rt2x00dev->interface.filter; + + /* + * Since we had stored the filter inside interface.filter, + * we should now clear that field. Otherwise the driver will + * assume nothing has changed (*total_flags will be compared + * to interface.filter to determine if any action is required). + */ + rt2x00dev->interface.filter = 0; + + rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw, + filter, &filter, 0, NULL); +} + +static void rt2x00lib_configuration_scheduled(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, config_work); + int preamble = !test_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + + rt2x00mac_erp_ie_changed(rt2x00dev->hw, + IEEE80211_ERP_CHANGE_PREAMBLE, 0, preamble); +} + +/* + * Interrupt context handlers. + */ +static void rt2x00lib_beacondone_scheduled(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, beacon_work); + struct data_ring *ring = + rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + struct data_entry *entry = rt2x00_get_data_entry(ring); + struct sk_buff *skb; + + skb = ieee80211_beacon_get(rt2x00dev->hw, + rt2x00dev->interface.id, + &entry->tx_status.control); + if (!skb) + return; + + rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb, + &entry->tx_status.control); + + dev_kfree_skb(skb); +} + +void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->beacon_work); +} +EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); + +void rt2x00lib_txdone(struct data_entry *entry, + const int status, const int retry) +{ + struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; + struct ieee80211_tx_status *tx_status = &entry->tx_status; + struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats; + int success = !!(status == TX_SUCCESS || status == TX_SUCCESS_RETRY); + int fail = !!(status == TX_FAIL_RETRY || status == TX_FAIL_INVALID || + status == TX_FAIL_OTHER); + + /* + * Update TX statistics. + */ + tx_status->flags = 0; + tx_status->ack_signal = 0; + tx_status->excessive_retries = (status == TX_FAIL_RETRY); + tx_status->retry_count = retry; + rt2x00dev->link.tx_success += success; + rt2x00dev->link.tx_failed += retry + fail; + + if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) { + if (success) + tx_status->flags |= IEEE80211_TX_STATUS_ACK; + else + stats->dot11ACKFailureCount++; + } + + tx_status->queue_length = entry->ring->stats.limit; + tx_status->queue_number = tx_status->control.queue; + + if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { + if (success) + stats->dot11RTSSuccessCount++; + else + stats->dot11RTSFailureCount++; + } + + /* + * Send the tx_status to mac80211, + * that method also cleans up the skb structure. + */ + ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status); + entry->skb = NULL; +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone); + +void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, + struct rxdata_entry_desc *desc) +{ + struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; + struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + unsigned int i; + int val = 0; + + /* + * Update RX statistics. + */ + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + for (i = 0; i < mode->num_rates; i++) { + rate = &mode->rates[i]; + + /* + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 0.5kbit/s. + */ + if (!desc->ofdm) + val = DEVICE_GET_RATE_FIELD(rate->val, RATE); + else + val = DEVICE_GET_RATE_FIELD(rate->val, PLCP); + + if (val == desc->signal) { + val = rate->val; + break; + } + } + + rt2x00_update_link_rssi(&rt2x00dev->link, desc->rssi); + rt2x00dev->link.rx_success++; + rx_status->rate = val; + rx_status->signal = + rt2x00lib_calculate_link_signal(rt2x00dev, desc->rssi); + rx_status->ssi = desc->rssi; + rx_status->flag = desc->flags; + + /* + * Send frame to mac80211 + */ + ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status); +} +EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); + +/* + * TX descriptor initializer + */ +void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + struct txdata_entry_desc desc; + struct data_ring *ring; + int tx_rate; + int bitrate; + int duration; + int residual; + u16 frame_control; + u16 seq_ctrl; + + /* + * Make sure the descriptor is properly cleared. + */ + memset(&desc, 0x00, sizeof(desc)); + + /* + * Get ring pointer, if we fail to obtain the + * correct ring, then use the first TX ring. + */ + ring = rt2x00lib_get_ring(rt2x00dev, control->queue); + if (!ring) + ring = rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + + desc.cw_min = ring->tx_params.cw_min; + desc.cw_max = ring->tx_params.cw_max; + desc.aifs = ring->tx_params.aifs; + + /* + * Identify queue + */ + if (control->queue < rt2x00dev->hw->queues) + desc.queue = control->queue; + else if (control->queue == IEEE80211_TX_QUEUE_BEACON || + control->queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + desc.queue = QUEUE_MGMT; + else + desc.queue = QUEUE_OTHER; + + /* + * Read required fields from ieee80211 header. + */ + frame_control = le16_to_cpu(ieee80211hdr->frame_control); + seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl); + + tx_rate = control->tx_rate; + + /* + * Check if this is a RTS/CTS frame + */ + if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { + __set_bit(ENTRY_TXD_BURST, &desc.flags); + if (is_rts_frame(frame_control)) + __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags); + if (control->rts_cts_rate) + tx_rate = control->rts_cts_rate; + } + + /* + * Check for OFDM + */ + if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK) + __set_bit(ENTRY_TXD_OFDM_RATE, &desc.flags); + + /* + * Check if more fragments are pending + */ + if (ieee80211_get_morefrag(ieee80211hdr)) { + __set_bit(ENTRY_TXD_BURST, &desc.flags); + __set_bit(ENTRY_TXD_MORE_FRAG, &desc.flags); + } + + /* + * Beacons and probe responses require the tsf timestamp + * to be inserted into the frame. + */ + if (control->queue == IEEE80211_TX_QUEUE_BEACON || + is_probe_resp(frame_control)) + __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc.flags); + + /* + * Determine with what IFS priority this frame should be send. + * Set ifs to IFS_SIFS when the this is not the first fragment, + * or this fragment came after RTS/CTS. + */ + if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 || + test_bit(ENTRY_TXD_RTS_FRAME, &desc.flags)) + desc.ifs = IFS_SIFS; + else + desc.ifs = IFS_BACKOFF; + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP); + desc.service = 0x04; + + if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) { + desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f; + desc.length_low = ((length + FCS_LEN) & 0x3f); + } else { + bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE); + + /* + * Convert length to microseconds. + */ + residual = get_duration_res(length + FCS_LEN, bitrate); + duration = get_duration(length + FCS_LEN, bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (bitrate == 110 && residual <= 3) + desc.service |= 0x80; + } + + desc.length_high = (duration >> 8) & 0xff; + desc.length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE)) + desc.signal |= 0x08; + } + + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, txd, &desc, + ieee80211hdr, length, control); +} +EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); + +/* + * Driver initialization handlers. + */ +static void rt2x00lib_channel(struct ieee80211_channel *entry, + const int channel, const int tx_power, + const int value) +{ + entry->chan = channel; + if (channel <= 14) + entry->freq = 2407 + (5 * channel); + else + entry->freq = 5000 + (5 * channel); + entry->val = value; + entry->flag = + IEEE80211_CHAN_W_IBSS | + IEEE80211_CHAN_W_ACTIVE_SCAN | + IEEE80211_CHAN_W_SCAN; + entry->power_level = tx_power; + entry->antenna_max = 0xff; +} + +static void rt2x00lib_rate(struct ieee80211_rate *entry, + const int rate, const int mask, + const int plcp, const int flags) +{ + entry->rate = rate; + entry->val = + DEVICE_SET_RATE_FIELD(rate, RATE) | + DEVICE_SET_RATE_FIELD(mask, RATEMASK) | + DEVICE_SET_RATE_FIELD(plcp, PLCP); + entry->flags = flags; + entry->val2 = entry->val; + if (entry->flags & IEEE80211_RATE_PREAMBLE2) + entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE); + entry->min_rssi_ack = 0; + entry->min_rssi_ack_delta = 0; +} + +static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, + struct hw_mode_spec *spec) +{ + struct ieee80211_hw *hw = rt2x00dev->hw; + struct ieee80211_hw_mode *hwmodes; + struct ieee80211_channel *channels; + struct ieee80211_rate *rates; + unsigned int i; + unsigned char tx_power; + + hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL); + if (!hwmodes) + goto exit; + + channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL); + if (!channels) + goto exit_free_modes; + + rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL); + if (!rates) + goto exit_free_channels; + + /* + * Initialize Rate list. + */ + rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB, + 0x00, IEEE80211_RATE_CCK); + rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB, + 0x01, IEEE80211_RATE_CCK_2); + rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB, + 0x02, IEEE80211_RATE_CCK_2); + rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB, + 0x03, IEEE80211_RATE_CCK_2); + + if (spec->num_rates > 4) { + rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB, + 0x0b, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB, + 0x0f, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB, + 0x0a, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB, + 0x0e, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB, + 0x09, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB, + 0x0d, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB, + 0x08, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB, + 0x0c, IEEE80211_RATE_OFDM); + } + + /* + * Initialize Channel list. + */ + for (i = 0; i < spec->num_channels; i++) { + if (spec->channels[i].channel <= 14) + tx_power = spec->tx_power_bg[i]; + else if (spec->tx_power_a) + tx_power = spec->tx_power_a[i]; + else + tx_power = spec->tx_power_default; + + rt2x00lib_channel(&channels[i], + spec->channels[i].channel, tx_power, i); + } + + /* + * Intitialize 802.11b + * Rates: CCK. + * Channels: OFDM. + */ + if (spec->num_modes > HWMODE_B) { + hwmodes[HWMODE_B].mode = MODE_IEEE80211B; + hwmodes[HWMODE_B].num_channels = 14; + hwmodes[HWMODE_B].num_rates = 4; + hwmodes[HWMODE_B].channels = channels; + hwmodes[HWMODE_B].rates = rates; + } + + /* + * Intitialize 802.11g + * Rates: CCK, OFDM. + * Channels: OFDM. + */ + if (spec->num_modes > HWMODE_G) { + hwmodes[HWMODE_G].mode = MODE_IEEE80211G; + hwmodes[HWMODE_G].num_channels = 14; + hwmodes[HWMODE_G].num_rates = spec->num_rates; + hwmodes[HWMODE_G].channels = channels; + hwmodes[HWMODE_G].rates = rates; + } + + /* + * Intitialize 802.11a + * Rates: OFDM. + * Channels: OFDM, UNII, HiperLAN2. + */ + if (spec->num_modes > HWMODE_A) { + hwmodes[HWMODE_A].mode = MODE_IEEE80211A; + hwmodes[HWMODE_A].num_channels = spec->num_channels - 14; + hwmodes[HWMODE_A].num_rates = spec->num_rates - 4; + hwmodes[HWMODE_A].channels = &channels[14]; + hwmodes[HWMODE_A].rates = &rates[4]; + } + + if (spec->num_modes > HWMODE_G && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G])) + goto exit_free_rates; + + if (spec->num_modes > HWMODE_B && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B])) + goto exit_free_rates; + + if (spec->num_modes > HWMODE_A && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A])) + goto exit_free_rates; + + rt2x00dev->hwmodes = hwmodes; + + return 0; + +exit_free_rates: + kfree(rates); + +exit_free_channels: + kfree(channels); + +exit_free_modes: + kfree(hwmodes); + +exit: + ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n"); + return -ENOMEM; +} + +static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) +{ + if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) + ieee80211_unregister_hw(rt2x00dev->hw); + + if (likely(rt2x00dev->hwmodes)) { + kfree(rt2x00dev->hwmodes->channels); + kfree(rt2x00dev->hwmodes->rates); + kfree(rt2x00dev->hwmodes); + rt2x00dev->hwmodes = NULL; + } +} + +static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + int status; + + /* + * Initialize HW modes. + */ + status = rt2x00lib_probe_hw_modes(rt2x00dev, spec); + if (status) + return status; + + /* + * Register HW. + */ + status = ieee80211_register_hw(rt2x00dev->hw); + if (status) { + rt2x00lib_remove_hw(rt2x00dev); + return status; + } + + __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags); + + return 0; +} + +/* + * Initialization/uninitialization handlers. + */ +static int rt2x00lib_alloc_entries(struct data_ring *ring, + const u16 max_entries, const u16 data_size, + const u16 desc_size) +{ + struct data_entry *entry; + unsigned int i; + + ring->stats.limit = max_entries; + ring->data_size = data_size; + ring->desc_size = desc_size; + + /* + * Allocate all ring entries. + */ + entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + for (i = 0; i < ring->stats.limit; i++) { + entry[i].flags = 0; + entry[i].ring = ring; + entry[i].skb = NULL; + } + + ring->entry = entry; + + return 0; +} + +static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + /* + * Allocate the RX ring. + */ + if (rt2x00lib_alloc_entries(rt2x00dev->rx, RX_ENTRIES, DATA_FRAME_SIZE, + rt2x00dev->ops->rxd_size)) + return -ENOMEM; + + /* + * First allocate the TX rings. + */ + txring_for_each(rt2x00dev, ring) { + if (rt2x00lib_alloc_entries(ring, TX_ENTRIES, DATA_FRAME_SIZE, + rt2x00dev->ops->txd_size)) + return -ENOMEM; + } + + if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) + return 0; + + /* + * Allocate the BEACON ring. + */ + if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[0], BEACON_ENTRIES, + MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size)) + return -ENOMEM; + + /* + * Allocate the Atim ring. + */ + if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[1], ATIM_ENTRIES, + DATA_FRAME_SIZE, rt2x00dev->ops->txd_size)) + return -ENOMEM; + + return 0; +} + +static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + ring_for_each(rt2x00dev, ring) { + kfree(ring->entry); + ring->entry = NULL; + } +} + +void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return; + + /* + * Unregister rfkill. + */ + rt2x00rfkill_unregister(rt2x00dev); + + /* + * Allow the HW to uninitialize. + */ + rt2x00dev->ops->lib->uninitialize(rt2x00dev); + + /* + * Free allocated ring entries. + */ + rt2x00lib_free_ring_entries(rt2x00dev); +} + +int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) +{ + int status; + + if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * Allocate all ring entries. + */ + status = rt2x00lib_alloc_ring_entries(rt2x00dev); + if (status) { + ERROR(rt2x00dev, "Ring entries allocation failed.\n"); + return status; + } + + /* + * Initialize the device. + */ + status = rt2x00dev->ops->lib->initialize(rt2x00dev); + if (status) + goto exit; + + __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags); + + /* + * Register the rfkill handler. + */ + status = rt2x00rfkill_register(rt2x00dev); + if (status) + goto exit_unitialize; + + return 0; + +exit_unitialize: + rt2x00lib_uninitialize(rt2x00dev); + +exit: + rt2x00lib_free_ring_entries(rt2x00dev); + + return status; +} + +/* + * driver allocation handlers. + */ +static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + /* + * We need the following rings: + * RX: 1 + * TX: hw->queues + * Beacon: 1 (if required) + * Atim: 1 (if required) + */ + rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues + + (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)); + + ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL); + if (!ring) { + ERROR(rt2x00dev, "Ring allocation failed.\n"); + return -ENOMEM; + } + + /* + * Initialize pointers + */ + rt2x00dev->rx = ring; + rt2x00dev->tx = &rt2x00dev->rx[1]; + if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) + rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues]; + + /* + * Initialize ring parameters. + * cw_min: 2^5 = 32. + * cw_max: 2^10 = 1024. + */ + ring_for_each(rt2x00dev, ring) { + ring->rt2x00dev = rt2x00dev; + ring->tx_params.aifs = 2; + ring->tx_params.cw_min = 5; + ring->tx_params.cw_max = 10; + } + + return 0; +} + +static void rt2x00lib_free_rings(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rx); + rt2x00dev->rx = NULL; + rt2x00dev->tx = NULL; + rt2x00dev->bcn = NULL; +} + +int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) +{ + int retval = -ENOMEM; + + /* + * Let the driver probe the device to detect the capabilities. + */ + retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); + if (retval) { + ERROR(rt2x00dev, "Failed to allocate device.\n"); + goto exit; + } + + /* + * Initialize configuration work. + */ + INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled); + INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); + INIT_WORK(&rt2x00dev->config_work, rt2x00lib_configuration_scheduled); + INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); + + /* + * Reset current working type. + */ + rt2x00dev->interface.type = INVALID_INTERFACE; + + /* + * Allocate ring array. + */ + retval = rt2x00lib_alloc_rings(rt2x00dev); + if (retval) + goto exit; + + /* + * Initialize ieee80211 structure. + */ + retval = rt2x00lib_probe_hw(rt2x00dev); + if (retval) { + ERROR(rt2x00dev, "Failed to initialize hw.\n"); + goto exit; + } + + /* + * Allocatie rfkill. + */ + retval = rt2x00rfkill_allocate(rt2x00dev); + if (retval) + goto exit; + + /* + * Open the debugfs entry. + */ + rt2x00debug_register(rt2x00dev); + + __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + return 0; + +exit: + rt2x00lib_remove_dev(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); + +void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) +{ + __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + /* + * Disable radio. + */ + rt2x00lib_disable_radio(rt2x00dev); + + /* + * Uninitialize device. + */ + rt2x00lib_uninitialize(rt2x00dev); + + /* + * Close debugfs entry. + */ + rt2x00debug_deregister(rt2x00dev); + + /* + * Free rfkill + */ + rt2x00rfkill_free(rt2x00dev); + + /* + * Free ieee80211_hw memory. + */ + rt2x00lib_remove_hw(rt2x00dev); + + /* + * Free firmware image. + */ + rt2x00lib_free_firmware(rt2x00dev); + + /* + * Free ring structures. + */ + rt2x00lib_free_rings(rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); + +/* + * Device state handlers + */ +#ifdef CONFIG_PM +int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) +{ + int retval; + + NOTICE(rt2x00dev, "Going to sleep.\n"); + __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + /* + * Only continue if mac80211 has open interfaces. + */ + if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + goto exit; + __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags); + + /* + * Disable radio and unitialize all items + * that must be recreated on resume. + */ + rt2x00mac_stop(rt2x00dev->hw); + rt2x00lib_uninitialize(rt2x00dev); + rt2x00debug_deregister(rt2x00dev); + +exit: + /* + * Set device mode to sleep for power management. + */ + retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); + if (retval) + return retval; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_suspend); + +int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) +{ + struct interface *intf = &rt2x00dev->interface; + int retval; + + NOTICE(rt2x00dev, "Waking up.\n"); + __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + /* + * Open the debugfs entry. + */ + rt2x00debug_register(rt2x00dev); + + /* + * Only continue if mac80211 had open interfaces. + */ + if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags)) + return 0; + + /* + * Reinitialize device and all active interfaces. + */ + retval = rt2x00mac_start(rt2x00dev->hw); + if (retval) + goto exit; + + /* + * Reconfigure device. + */ + rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); + if (!rt2x00dev->hw->conf.radio_enabled) + rt2x00lib_disable_radio(rt2x00dev); + + rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); + rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + rt2x00lib_config_type(rt2x00dev, intf->type); + + /* + * It is possible that during that mac80211 has attempted + * to send frames while we were suspending or resuming. + * In that case we have disabled the TX queue and should + * now enable it again + */ + ieee80211_start_queues(rt2x00dev->hw); + + /* + * When in Master or Ad-hoc mode, + * restart Beacon transmitting by faking a beacondone event. + */ + if (intf->type == IEEE80211_IF_TYPE_AP || + intf->type == IEEE80211_IF_TYPE_IBSS) + rt2x00lib_beacondone(rt2x00dev); + + return 0; + +exit: + rt2x00lib_disable_radio(rt2x00dev); + rt2x00lib_uninitialize(rt2x00dev); + rt2x00debug_deregister(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00lib_resume); +#endif /* CONFIG_PM */ + +/* + * rt2x00lib module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 library"); +MODULE_LICENSE("GPL"); |