diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00ht.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00ht.c | 133 |
1 files changed, 0 insertions, 133 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c deleted file mode 100644 index ae1219dffaa..00000000000 --- a/drivers/net/wireless/rt2x00/rt2x00ht.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 HT specific routines. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "rt2x00.h" -#include "rt2x00lib.h" - -void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, - struct txentry_desc *txdesc, - const struct rt2x00_rate *hwrate) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; - - if (tx_info->control.sta) - txdesc->u.ht.mpdu_density = - tx_info->control.sta->ht_cap.ampdu_density; - - txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */ - - txdesc->u.ht.stbc = - (tx_info->flags & IEEE80211_TX_CTL_STBC) >> IEEE80211_TX_CTL_STBC_SHIFT; - - /* - * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the - * mcs rate to be used - */ - if (txrate->flags & IEEE80211_TX_RC_MCS) { - txdesc->u.ht.mcs = txrate->idx; - - /* - * MIMO PS should be set to 1 for STA's using dynamic SM PS - * when using more then one tx stream (>MCS7). - */ - if (tx_info->control.sta && txdesc->u.ht.mcs > 7 && - ((tx_info->control.sta->ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT) == - WLAN_HT_CAP_SM_PS_DYNAMIC) - __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); - } else { - txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); - if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->u.ht.mcs |= 0x08; - } - - /* - * This frame is eligible for an AMPDU, however, don't aggregate - * frames that are intended to probe a specific tx rate. - */ - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU && - !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) - __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags); - - /* - * Set 40Mhz mode if necessary (for legacy rates this will - * duplicate the frame to both channels). - */ - if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH || - txrate->flags & IEEE80211_TX_RC_DUP_DATA) - __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); - if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) - __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); - - /* - * Determine IFS values - * - Use TXOP_BACKOFF for management frames - * - Use TXOP_SIFS for fragment bursts - * - Use TXOP_HTTXOP for everything else - * - * Note: rt2800 devices won't use CTS protection (if used) - * for frames not transmitted with TXOP_HTTXOP - */ - if (ieee80211_is_mgmt(hdr->frame_control)) - txdesc->u.ht.txop = TXOP_BACKOFF; - else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) - txdesc->u.ht.txop = TXOP_SIFS; - else - txdesc->u.ht.txop = TXOP_HTTXOP; -} - -u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - int center_channel; - u16 i; - - /* - * Initialize center channel to current channel. - */ - center_channel = spec->channels[conf->channel->hw_value].channel; - - /* - * Adjust center channel to HT40+ and HT40- operation. - */ - if (conf_is_ht40_plus(conf)) - center_channel += 2; - else if (conf_is_ht40_minus(conf)) - center_channel -= (center_channel == 14) ? 1 : 2; - - for (i = 0; i < spec->num_channels; i++) - if (spec->channels[i].channel == center_channel) - return i; - - WARN_ON(1); - return conf->channel->hw_value; -} |