1 files changed, 169 insertions, 76 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index d0650738863..2c6cc5c374f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
 	struct ieee80211_tx_info *rts_info;
 	struct sk_buff *skb;
-	int size;
+	unsigned int data_length;
+	int retval = 0;
 
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
-		size = sizeof(struct ieee80211_cts);
+		data_length = sizeof(struct ieee80211_cts);
 	else
-		size = sizeof(struct ieee80211_rts);
+		data_length = sizeof(struct ieee80211_rts);
 
-	skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
-	if (!skb) {
+	skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
+	if (unlikely(!skb)) {
 		WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
-		return NETDEV_TX_BUSY;
+		return -ENOMEM;
 	}
 
 	skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
-	skb_put(skb, size);
+	skb_put(skb, data_length);
 
 	/*
 	 * Copy TX information over from original frame to
@@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	else
 		rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
 
+	skb->do_not_encrypt = 1;
+
+	/*
+	 * RTS/CTS frame should use the length of the frame plus any
+	 * encryption overhead that will be added by the hardware.
+	 */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (!frag_skb->do_not_encrypt)
+		data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
 		ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
-					frag_skb->data, size, tx_info,
+					frag_skb->data, data_length, tx_info,
 					(struct ieee80211_cts *)(skb->data));
 	else
 		ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
-				  frag_skb->data, size, tx_info,
+				  frag_skb->data, data_length, tx_info,
 				  (struct ieee80211_rts *)(skb->data));
 
-	if (rt2x00queue_write_tx_frame(queue, skb)) {
+	retval = rt2x00queue_write_tx_frame(queue, skb);
+	if (retval) {
 		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
-		return NETDEV_TX_BUSY;
 	}
 
-	return NETDEV_TX_OK;
+	return retval;
 }
 
 int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * Note that we can only stop the TX queues inside the TX path
 	 * due to possible race conditions in mac80211.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
-		ieee80211_stop_queues(hw);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		goto exit_fail;
 
 	/*
 	 * Determine which queue to put packet on.
@@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
 			       IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
 	    !rt2x00dev->ops->hw->set_rts_threshold) {
-		if (rt2x00queue_available(queue) <= 1) {
-			ieee80211_stop_queue(rt2x00dev->hw, qid);
-			return NETDEV_TX_BUSY;
-		}
-
-		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
-			ieee80211_stop_queue(rt2x00dev->hw, qid);
-			return NETDEV_TX_BUSY;
-		}
-	}
+		if (rt2x00queue_available(queue) <= 1)
+			goto exit_fail;
 
-	if (rt2x00queue_write_tx_frame(queue, skb)) {
-		ieee80211_stop_queue(rt2x00dev->hw, qid);
-		return NETDEV_TX_BUSY;
+		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
+			goto exit_fail;
 	}
 
+	if (rt2x00queue_write_tx_frame(queue, skb))
+		goto exit_fail;
+
 	if (rt2x00queue_threshold(queue))
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 
 	return NETDEV_TX_OK;
+
+ exit_fail:
+	ieee80211_stop_queue(rt2x00dev->hw, qid);
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_tx);
 
@@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	return rt2x00lib_start(rt2x00dev);
@@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return;
 
 	rt2x00lib_stop(rt2x00dev);
@@ -199,12 +206,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * Don't allow interfaces to be added
 	 * the device has disappeared.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
-	    !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
 	switch (conf->type) {
-	case IEEE80211_IF_TYPE_AP:
+	case NL80211_IFTYPE_AP:
 		/*
 		 * We don't support mixed combinations of
 		 * sta and ap interfaces.
@@ -220,8 +227,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 			return -ENOBUFS;
 
 		break;
-	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_IBSS:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
 		/*
 		 * We don't support mixed combinations of
 		 * sta and ap interfaces.
@@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 */
 	for (i = 0; i < queue->limit; i++) {
 		entry = &queue->entries[i];
-		if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
+		if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
 			break;
 	}
 
@@ -261,7 +268,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * increase interface count and start initialization.
 	 */
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count++;
 	else
 		rt2x00dev->intf_sta_count++;
@@ -270,7 +277,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	spin_lock_init(&intf->seqlock);
 	intf->beacon = entry;
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
 	memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
 
@@ -303,12 +310,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 	 * either the device has disappeared or when
 	 * no interface is present.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
-	    (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+	    (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
 		return;
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count--;
 	else
 		rt2x00dev->intf_sta_count--;
@@ -317,59 +324,59 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 	 * Release beacon entry so it is available for
 	 * new interfaces again.
 	 */
-	__clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
+	clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
 
 	/*
 	 * Make sure the bssid and mac address registers
 	 * are cleared to prevent false ACKing of frames.
 	 */
 	rt2x00lib_config_intf(rt2x00dev, intf,
-			      IEEE80211_IF_TYPE_INVALID, NULL, NULL);
+			      NL80211_IFTYPE_UNSPECIFIED, NULL, NULL);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	int force_reconfig;
+	int radio_on;
+	int status;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
 	 * to remove the device or perhaps suspending it.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	/*
-	 * Check if we need to disable the radio,
-	 * if this is not the case, at least the RX must be disabled.
+	 * Only change device state when the radio is enabled. It does not
+	 * matter what parameters we have configured when the radio is disabled
+	 * because we won't be able to send or receive anyway. Also note that
+	 * some configuration parameters (e.g. channel and antenna values) can
+	 * only be set when the radio is enabled.
 	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
-		if (!conf->radio_enabled)
-			rt2x00lib_disable_radio(rt2x00dev);
-		else
-			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
-	}
+	radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+	if (conf->radio_enabled) {
+		/* For programming the values, we have to turn RX off */
+		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 
-	/*
-	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
-	 * been started and the configuration must be forced upon the hardware.
-	 * Otherwise registers will not be intialized correctly and could
-	 * result in non-working hardware because essential registers aren't
-	 * initialized.
-	 */
-	force_reconfig =
-	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+		/* Enable the radio */
+		status = rt2x00lib_enable_radio(rt2x00dev);
+		if (unlikely(status))
+			return status;
 
-	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
+		/*
+		 * When we've just turned on the radio, we want to reprogram
+		 * everything to ensure a consistent state
+		 */
+		rt2x00lib_config(rt2x00dev, conf, !radio_on);
 
-	/*
-	 * Reenable RX only if the radio should be on.
-	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+		/* Turn RX back on */
 		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
-	else if (conf->radio_enabled)
-		return rt2x00lib_enable_radio(rt2x00dev);
+	} else {
+		/* Disable the radio */
+		rt2x00lib_disable_radio(rt2x00dev);
+	}
 
 	return 0;
 }
@@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	 * Mac80211 might be calling this function while we are trying
 	 * to remove the device or perhaps suspending it.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	spin_lock(&intf->lock);
@@ -467,6 +474,91 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		      const u8 *local_address, const u8 *address,
+		      struct ieee80211_key_conf *key)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int (*set_key) (struct rt2x00_dev *rt2x00dev,
+			struct rt2x00lib_crypto *crypto,
+			struct ieee80211_key_conf *key);
+	struct rt2x00lib_crypto crypto;
+
+	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		return -EOPNOTSUPP;
+	else if (key->keylen > 32)
+		return -ENOSPC;
+
+	memset(&crypto, 0, sizeof(crypto));
+
+	/*
+	 * When in STA mode, bssidx is always 0 otherwise local_address[5]
+	 * contains the bss number, see BSS_ID_MASK comments for details.
+	 */
+	if (rt2x00dev->intf_sta_count)
+		crypto.bssidx = 0;
+	else
+		crypto.bssidx =
+		    local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+	crypto.cipher = rt2x00crypto_key_to_cipher(key);
+	if (crypto.cipher == CIPHER_NONE)
+		return -EOPNOTSUPP;
+
+	crypto.cmd = cmd;
+	crypto.address = address;
+
+	if (crypto.cipher == CIPHER_TKIP) {
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+			memcpy(&crypto.key,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+			       sizeof(crypto.key));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+			memcpy(&crypto.tx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+			       sizeof(crypto.tx_mic));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+			memcpy(&crypto.rx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+			       sizeof(crypto.rx_mic));
+	} else
+		memcpy(&crypto.key, &key->key[0], key->keylen);
+
+	/*
+	 * Each BSS has a maximum of 4 shared keys.
+	 * Shared key index values:
+	 *	0) BSS0 key0
+	 *	1) BSS0 key1
+	 *	...
+	 *	4) BSS1 key0
+	 *	...
+	 *	8) BSS2 key0
+	 *	...
+	 * Both pairwise as shared key indeces are determined by
+	 * driver. This is required because the hardware requires
+	 * keys to be assigned in correct order (When key 1 is
+	 * provided but key 0 is not, then the key is not found
+	 * by the hardware during RX).
+	 */
+	if (cmd == SET_KEY)
+		key->hw_key_idx = 0;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		set_key = rt2x00dev->ops->lib->config_pairwise_key;
+	else
+		set_key = rt2x00dev->ops->lib->config_shared_key;
+
+	if (!set_key)
+		return -EOPNOTSUPP;
+
+	return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats)
 {
@@ -575,10 +667,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
 		queue->cw_max = 10; /* cw_min: 2^10 = 1024. */
 
 	queue->aifs = params->aifs;
+	queue->txop = params->txop;
 
 	INFO(rt2x00dev,
-	     "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
-	     queue_idx, queue->cw_min, queue->cw_max, queue->aifs);
+	     "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n",
+	     queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop);
 
 	return 0;
 }