1 files changed, 131 insertions, 230 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index e5ceae805b5..83862e7f7ae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -40,7 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
 			     void *buffer, const u16 buffer_length,
 			     const int timeout)
 {
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	int status;
 	unsigned int i;
 	unsigned int pipe =
@@ -129,17 +129,12 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 {
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
 	struct txdone_entry_desc txdesc;
-	__le32 *txd = (__le32 *)entry->skb->data;
-	u32 word;
 
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
-	rt2x00_desc_read(txd, 0, &word);
-
 	/*
 	 * Remove the descriptor data from the buffer.
 	 */
@@ -147,128 +142,116 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 
 	/*
 	 * Obtain the status about this packet.
+	 * Note that when the status is 0 it does not mean the
+	 * frame was send out correctly. It only means the frame
+	 * was succesfully pushed to the hardware, we have no
+	 * way to determine the transmission status right now.
+	 * (Only indirectly by looking at the failed TX counters
+	 * in the register).
 	 */
-	txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
+	if (!urb->status)
+		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
+	else
+		__set_bit(TXDONE_FAILURE, &txdesc.flags);
 	txdesc.retry = 0;
-	txdesc.control = &priv_tx->control;
 
 	rt2x00lib_txdone(entry, &txdesc);
-
-	/*
-	 * Make this entry available for reuse.
-	 */
-	entry->flags = 0;
-	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
-
-	/*
-	 * If the data queue was full before the txdone handler
-	 * we must make sure the packet queue in the mac80211 stack
-	 * is reenabled when the txdone handler has finished.
-	 */
-	if (!rt2x00queue_full(entry->queue))
-		ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue);
 }
 
-int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
-			    struct data_queue *queue, struct sk_buff *skb,
-			    struct ieee80211_tx_control *control)
+int rt2x00usb_write_tx_data(struct queue_entry *entry)
 {
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
-	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
-	struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 	struct skb_frame_desc *skbdesc;
 	u32 length;
 
-	if (rt2x00queue_full(queue))
-		return -EINVAL;
-
-	if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
-		ERROR(rt2x00dev,
-		      "Arrived at non-free entry in the non-full queue %d.\n"
-		      "Please file bug report to %s.\n",
-		      control->queue, DRV_PROJECT);
-		return -EINVAL;
-	}
-
 	/*
 	 * Add the descriptor in front of the skb.
 	 */
-	skb_push(skb, queue->desc_size);
-	memset(skb->data, 0, queue->desc_size);
+	skb_push(entry->skb, entry->queue->desc_size);
+	memset(entry->skb->data, 0, entry->queue->desc_size);
 
 	/*
 	 * Fill in skb descriptor
 	 */
-	skbdesc = get_skb_frame_desc(skb);
-	skbdesc->data = skb->data + queue->desc_size;
-	skbdesc->data_len = skb->len - queue->desc_size;
-	skbdesc->desc = skb->data;
-	skbdesc->desc_len = queue->desc_size;
-	skbdesc->entry = entry;
-
-	memcpy(&priv_tx->control, control, sizeof(priv_tx->control));
-	rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
+	skbdesc = get_skb_frame_desc(entry->skb);
+	skbdesc->desc = entry->skb->data;
+	skbdesc->desc_len = entry->queue->desc_size;
 
 	/*
 	 * USB devices cannot blindly pass the skb->len as the
 	 * length of the data to usb_fill_bulk_urb. Pass the skb
 	 * to the driver to determine what the length should be.
 	 */
-	length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb);
-
-	/*
-	 * Initialize URB and send the frame to the device.
-	 */
-	__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-	usb_fill_bulk_urb(priv_tx->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1),
-			  skb->data, length, rt2x00usb_interrupt_txdone, entry);
-	usb_submit_urb(priv_tx->urb, GFP_ATOMIC);
+	length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb);
 
-	rt2x00queue_index_inc(queue, Q_INDEX);
+	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
+			  usb_sndbulkpipe(usb_dev, 1),
+			  entry->skb->data, length,
+			  rt2x00usb_interrupt_txdone, entry);
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
 
-/*
- * RX data handlers.
- */
-static struct sk_buff* rt2x00usb_alloc_rxskb(struct data_queue *queue)
+static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
 {
-	struct sk_buff *skb;
-	unsigned int frame_size;
+	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+
+	if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
+		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+}
+
+void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+			     const enum data_queue_qid qid)
+{
+	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid);
+	unsigned long irqflags;
+	unsigned int index;
+	unsigned int index_done;
+	unsigned int i;
 
 	/*
-	 * As alignment we use 2 and not NET_IP_ALIGN because we need
-	 * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN
-	 * can be 0 on some hardware). We use these 2 bytes for frame
-	 * alignment later, we assume that the chance that
-	 * header_size % 4 == 2 is bigger then header_size % 2 == 0
-	 * and thus optimize alignment by reserving the 2 bytes in
-	 * advance.
+	 * Only protect the range we are going to loop over,
+	 * if during our loop a extra entry is set to pending
+	 * it should not be kicked during this run, since it
+	 * is part of another TX operation.
 	 */
-	frame_size = queue->data_size + queue->desc_size;
-	skb = dev_alloc_skb(queue->desc_size + frame_size + 2);
-	if (!skb)
-		return NULL;
-
-	skb_reserve(skb, queue->desc_size + 2);
-	skb_put(skb, frame_size);
+	spin_lock_irqsave(&queue->lock, irqflags);
+	index = queue->index[Q_INDEX];
+	index_done = queue->index[Q_INDEX_DONE];
+	spin_unlock_irqrestore(&queue->lock, irqflags);
 
-	return skb;
+	/*
+	 * Start from the TX done pointer, this guarentees that we will
+	 * send out all frames in the correct order.
+	 */
+	if (index_done < index) {
+		for (i = index_done; i < index; i++)
+			rt2x00usb_kick_tx_entry(&queue->entries[i]);
+	} else {
+		for (i = index_done; i < queue->limit; i++)
+			rt2x00usb_kick_tx_entry(&queue->entries[i]);
+
+		for (i = 0; i < index; i++)
+			rt2x00usb_kick_tx_entry(&queue->entries[i]);
+	}
 }
+EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue);
 
+/*
+ * RX data handlers.
+ */
 static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 {
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct sk_buff *skb;
-	struct skb_frame_desc *skbdesc;
-	struct rxdone_entry_desc rxdesc;
-	int header_size;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u8 rxd[32];
 
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
@@ -276,61 +259,22 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	 * to be actually valid, or if the urb is signaling
 	 * a problem.
 	 */
-	if (urb->actual_length < entry->queue->desc_size || urb->status)
-		goto skip_entry;
-
-	/*
-	 * Fill in skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(entry->skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->entry = entry;
-
-	memset(&rxdesc, 0, sizeof(rxdesc));
-	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
-
-	/*
-	 * The data behind the ieee80211 header must be
-	 * aligned on a 4 byte boundary.
-	 */
-	header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
-	if (header_size % 4 == 0) {
-		skb_push(entry->skb, 2);
-		memmove(entry->skb->data, entry->skb->data + 2,
-			entry->skb->len - 2);
-		skbdesc->data = entry->skb->data;
-		skb_trim(entry->skb,entry->skb->len - 2);
+	if (urb->actual_length < entry->queue->desc_size || urb->status) {
+		__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+		usb_submit_urb(urb, GFP_ATOMIC);
+		return;
 	}
 
 	/*
-	 * Allocate a new sk buffer to replace the current one.
-	 * If allocation fails, we should drop the current frame
-	 * so we can recycle the existing sk buffer for the new frame.
+	 * Fill in desc fields of the skb descriptor
 	 */
-	skb = rt2x00usb_alloc_rxskb(entry->queue);
-	if (!skb)
-		goto skip_entry;
+	skbdesc->desc = rxd;
+	skbdesc->desc_len = entry->queue->desc_size;
 
 	/*
 	 * Send the frame to rt2x00lib for further processing.
 	 */
-	rt2x00lib_rxdone(entry, &rxdesc);
-
-	/*
-	 * Replace current entry's skb with the newly allocated one,
-	 * and reinitialize the urb.
-	 */
-	entry->skb = skb;
-	urb->transfer_buffer = entry->skb->data;
-	urb->transfer_buffer_length = entry->skb->len;
-
-skip_entry:
-	if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) {
-		__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		usb_submit_urb(urb, GFP_ATOMIC);
-	}
-
-	rt2x00queue_index_inc(entry->queue, Q_INDEX);
+	rt2x00lib_rxdone(rt2x00dev, entry);
 }
 
 /*
@@ -338,27 +282,21 @@ skip_entry:
  */
 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	struct queue_entry_priv_usb_rx *priv_rx;
-	struct queue_entry_priv_usb_tx *priv_tx;
-	struct queue_entry_priv_usb_bcn *priv_bcn;
+	struct queue_entry_priv_usb *entry_priv;
+	struct queue_entry_priv_usb_bcn *bcn_priv;
 	struct data_queue *queue;
 	unsigned int i;
 
-	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
+	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
 				    REGISTER_TIMEOUT);
 
 	/*
 	 * Cancel all queues.
 	 */
-	for (i = 0; i < rt2x00dev->rx->limit; i++) {
-		priv_rx = rt2x00dev->rx->entries[i].priv_data;
-		usb_kill_urb(priv_rx->urb);
-	}
-
-	tx_queue_for_each(rt2x00dev, queue) {
+	queue_for_each(rt2x00dev, queue) {
 		for (i = 0; i < queue->limit; i++) {
-			priv_tx = queue->entries[i].priv_data;
-			usb_kill_urb(priv_tx->urb);
+			entry_priv = queue->entries[i].priv_data;
+			usb_kill_urb(entry_priv->urb);
 		}
 	}
 
@@ -369,19 +307,9 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 		return;
 
 	for (i = 0; i < rt2x00dev->bcn->limit; i++) {
-		priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
-		usb_kill_urb(priv_bcn->urb);
-
-		if (priv_bcn->guardian_urb)
-			usb_kill_urb(priv_bcn->guardian_urb);
-	}
-
-	if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
-		return;
-
-	for (i = 0; i < rt2x00dev->bcn[1].limit; i++) {
-		priv_tx = rt2x00dev->bcn[1].entries[i].priv_data;
-		usb_kill_urb(priv_tx->urb);
+		bcn_priv = rt2x00dev->bcn->entries[i].priv_data;
+		if (bcn_priv->guardian_urb)
+			usb_kill_urb(bcn_priv->guardian_urb);
 	}
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
@@ -392,16 +320,16 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
 void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
 			    struct queue_entry *entry)
 {
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
-	struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data;
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 
-	usb_fill_bulk_urb(priv_rx->urb, usb_dev,
+	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
 			  usb_rcvbulkpipe(usb_dev, 1),
 			  entry->skb->data, entry->skb->len,
 			  rt2x00usb_interrupt_rxdone, entry);
 
 	__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-	usb_submit_urb(priv_rx->urb, GFP_ATOMIC);
+	usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry);
 
@@ -415,38 +343,31 @@ EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry);
 static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
 			       struct data_queue *queue)
 {
-	struct queue_entry_priv_usb_rx *priv_rx;
-	struct queue_entry_priv_usb_tx *priv_tx;
-	struct queue_entry_priv_usb_bcn *priv_bcn;
-	struct urb *urb;
-	unsigned int guardian =
-	    test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
+	struct queue_entry_priv_usb *entry_priv;
+	struct queue_entry_priv_usb_bcn *bcn_priv;
 	unsigned int i;
 
+	for (i = 0; i < queue->limit; i++) {
+		entry_priv = queue->entries[i].priv_data;
+		entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!entry_priv->urb)
+			return -ENOMEM;
+	}
+
 	/*
-	 * Allocate the URB's
+	 * If this is not the beacon queue or
+	 * no guardian byte was required for the beacon,
+	 * then we are done.
 	 */
+	if (rt2x00dev->bcn != queue ||
+	    !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+		return 0;
+
 	for (i = 0; i < queue->limit; i++) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb)
+		bcn_priv = queue->entries[i].priv_data;
+		bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!bcn_priv->guardian_urb)
 			return -ENOMEM;
-
-		if (queue->qid == QID_RX) {
-			priv_rx = queue->entries[i].priv_data;
-			priv_rx->urb = urb;
-		} else if (queue->qid == QID_MGMT && guardian) {
-			priv_bcn = queue->entries[i].priv_data;
-			priv_bcn->urb = urb;
-
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!urb)
-				return -ENOMEM;
-
-			priv_bcn->guardian_urb = urb;
-		} else {
-			priv_tx = queue->entries[i].priv_data;
-			priv_tx->urb = urb;
-		}
 	}
 
 	return 0;
@@ -455,47 +376,39 @@ static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
 static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
 			       struct data_queue *queue)
 {
-	struct queue_entry_priv_usb_rx *priv_rx;
-	struct queue_entry_priv_usb_tx *priv_tx;
-	struct queue_entry_priv_usb_bcn *priv_bcn;
-	struct urb *urb;
-	unsigned int guardian =
-	    test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
+	struct queue_entry_priv_usb *entry_priv;
+	struct queue_entry_priv_usb_bcn *bcn_priv;
 	unsigned int i;
 
 	if (!queue->entries)
 		return;
 
 	for (i = 0; i < queue->limit; i++) {
-		if (queue->qid == QID_RX) {
-			priv_rx = queue->entries[i].priv_data;
-			urb = priv_rx->urb;
-		} else if (queue->qid == QID_MGMT && guardian) {
-			priv_bcn = queue->entries[i].priv_data;
-
-			usb_kill_urb(priv_bcn->guardian_urb);
-			usb_free_urb(priv_bcn->guardian_urb);
-
-			urb = priv_bcn->urb;
-		} else {
-			priv_tx = queue->entries[i].priv_data;
-			urb = priv_tx->urb;
-		}
+		entry_priv = queue->entries[i].priv_data;
+		usb_kill_urb(entry_priv->urb);
+		usb_free_urb(entry_priv->urb);
+	}
 
-		usb_kill_urb(urb);
-		usb_free_urb(urb);
-		if (queue->entries[i].skb)
-			kfree_skb(queue->entries[i].skb);
+	/*
+	 * If this is not the beacon queue or
+	 * no guardian byte was required for the beacon,
+	 * then we are done.
+	 */
+	if (rt2x00dev->bcn != queue ||
+	    !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+		return;
+
+	for (i = 0; i < queue->limit; i++) {
+		bcn_priv = queue->entries[i].priv_data;
+		usb_kill_urb(bcn_priv->guardian_urb);
+		usb_free_urb(bcn_priv->guardian_urb);
 	}
 }
 
 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
-	struct sk_buff *skb;
-	unsigned int entry_size;
-	unsigned int i;
-	int uninitialized_var(status);
+	int status;
 
 	/*
 	 * Allocate DMA
@@ -506,18 +419,6 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
 			goto exit;
 	}
 
-	/*
-	 * For the RX queue, skb's should be allocated.
-	 */
-	entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
-	for (i = 0; i < rt2x00dev->rx->limit; i++) {
-		skb = rt2x00usb_alloc_rxskb(rt2x00dev->rx);
-		if (!skb)
-			goto exit;
-
-		rt2x00dev->rx->entries[i].skb = skb;
-	}
-
 	return 0;
 
 exit:
@@ -596,7 +497,7 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 	usb_set_intfdata(usb_intf, hw);
 
 	rt2x00dev = hw->priv;
-	rt2x00dev->dev = usb_intf;
+	rt2x00dev->dev = &usb_intf->dev;
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
 	mutex_init(&rt2x00dev->usb_cache_mutex);