diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 807 |
1 files changed, 552 insertions, 255 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 14bc7b28165..a461620b489 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -38,6 +38,13 @@ #include "rt61pci.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 0; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * BBP and RF register require indirect register access, * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. @@ -156,7 +163,7 @@ rf_write: rt2x00_rf_write(rt2x00dev, word, value); } -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS /* * This function is only called from rt61pci_led_brightness() * make gcc happy by placing this function inside the @@ -188,7 +195,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } -#endif /* CONFIG_RT61PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -264,7 +271,7 @@ static const struct rt2x00debug rt61pci_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT61PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -274,9 +281,9 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) } #else #define rt61pci_rfkill_poll NULL -#endif /* CONFIG_RT61PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt61pci_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -330,11 +337,220 @@ static int rt61pci_blink_set(struct led_classdev *led_cdev, return 0; } -#endif /* CONFIG_RT61PCI_LEDS */ + +static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt61pci_brightness_set; + led->led_dev.blink_set = rt61pci_blink_set; + led->flags = LED_INITIALIZED; +} +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. */ +static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -429,6 +645,30 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); } + +static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, const int basic_rate_mask) { @@ -747,6 +987,9 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { + /* Always recalculate LNA gain before changing configuration */ + rt61pci_config_lna_gain(rt2x00dev, libconf); + if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) @@ -915,7 +1158,7 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) return fw_name; } -static u16 rt61pci_get_firmware_crc(void *data, const size_t len) +static u16 rt61pci_get_firmware_crc(const void *data, const size_t len) { u16 crc; @@ -932,7 +1175,7 @@ static u16 rt61pci_get_firmware_crc(void *data, const size_t len) return crc; } -static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, +static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, const size_t len) { int i; @@ -993,6 +1236,11 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, } /* + * Hardware needs another millisecond before it is ready. + */ + msleep(1); + + /* * Reset MAC and BBP registers. */ reg = 0; @@ -1018,49 +1266,35 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(priv_rx->desc, 5, &word); + rt2x00_desc_read(entry_priv->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - priv_rx->data_dma); - rt2x00_desc_write(priv_rx->desc, 5, word); + skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 5, word); - rt2x00_desc_read(priv_rx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(priv_rx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word; - rt2x00_desc_read(priv_tx->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(priv_tx->desc, 1, word); - - rt2x00_desc_read(priv_tx->desc, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); - rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx); - rt2x00_desc_write(priv_tx->desc, 5, word); - - rt2x00_desc_read(priv_tx->desc, 6, &word); - rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - priv_tx->data_dma); - rt2x00_desc_write(priv_tx->desc, 6, word); - - rt2x00_desc_read(priv_tx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(priv_tx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; u32 reg; /* @@ -1082,28 +1316,28 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00dev->tx[0].desc_size / 4); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); - priv_tx = rt2x00dev->tx[0].entries[0].priv_data; + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[1].entries[0].priv_data; + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[2].entries[0].priv_data; + entry_priv = rt2x00dev->tx[2].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[3].entries[0].priv_data; + entry_priv = rt2x00dev->tx[3].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); @@ -1113,10 +1347,10 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); - priv_rx = rt2x00dev->rx->entries[0].priv_data; + entry_priv = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - priv_rx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); @@ -1201,6 +1435,15 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); @@ -1235,16 +1478,6 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - /* * Clear all beacons * For the Beacon base registers we only need to clear @@ -1285,25 +1518,32 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; - u8 reg_id; u8 value; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt61pci_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt61pci_bbp_write(rt2x00dev, 3, 0x00); rt61pci_bbp_write(rt2x00dev, 15, 0x30); rt61pci_bbp_write(rt2x00dev, 21, 0xc8); @@ -1352,7 +1592,8 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); } @@ -1404,17 +1645,10 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt61pci_init_queues(rt2x00dev) || - rt61pci_init_registers(rt2x00dev) || - rt61pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt61pci_init_queues(rt2x00dev) || + rt61pci_init_registers(rt2x00dev) || + rt61pci_init_bbp(rt2x00dev))) return -EIO; - } - - /* - * Enable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); /* * Enable RX. @@ -1446,11 +1680,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); - - /* - * Disable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); } static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) @@ -1458,7 +1687,6 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) u32 reg; unsigned int i; char put_to_sleep; - char current_state; put_to_sleep = (state != STATE_AWAKE); @@ -1474,16 +1702,12 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); - current_state = - rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); - if (current_state == !put_to_sleep) + state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); + if (state == !put_to_sleep) return 0; msleep(10); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state %d.\n", !put_to_sleep, current_state); - return -EBUSY; } @@ -1501,11 +1725,13 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt61pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt61pci_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1518,6 +1744,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1525,9 +1755,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1541,8 +1770,10 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1552,15 +1783,28 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); + rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, + skbdesc->entry->entry_idx); rt2x00_set_field32(&word, TXD_W5_TX_POWER, TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); + rt2x00_desc_read(txd, 6, &word); + rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, + skbdesc->skb_dma); + rt2x00_desc_write(txd, 6, word); + if (skbdesc->desc_len > TXINFO_SIZE) { rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len); rt2x00_desc_write(txd, 11, word); } @@ -1577,25 +1821,63 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } /* * TX data initialization */ +static void rt61pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2x00pci_register_multiwrite(rt2x00dev, + beacon_base, + skbdesc->desc, skbdesc->desc_len); + rt2x00pci_register_multiwrite(rt2x00dev, + beacon_base + skbdesc->desc_len, + entry->skb->data, entry->skb->len); + + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; +} + static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { /* * For Wi-Fi faily generated beacons between participating * stations. Set TBTT phase adaptive adjustment step to 8us. @@ -1613,14 +1895,10 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, - (queue == IEEE80211_TX_QUEUE_DATA2)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, - (queue == IEEE80211_TX_QUEUE_DATA3)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -1629,40 +1907,27 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, */ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) { - u16 eeprom; - u8 offset; + u8 offset = rt2x00dev->lna_gain; u8 lna; lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); switch (lna) { case 3: - offset = 90; + offset += 90; break; case 2: - offset = 74; + offset += 74; break; case 1: - offset = 64; + offset += 64; break; default: return 0; } if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - offset += 14; - if (lna == 3 || lna == 2) offset += 10; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; @@ -1671,17 +1936,49 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt61pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word1; - rt2x00_desc_read(priv_rx->desc, 0, &word0); - rt2x00_desc_read(priv_rx->desc, 1, &word1); + rt2x00_desc_read(entry_priv->desc, 0, &word0); + rt2x00_desc_read(entry_priv->desc, 1, &word1); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv); + _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv); + _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1689,12 +1986,13 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = 0; if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1707,7 +2005,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; struct queue_entry *entry; struct queue_entry *entry_done; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; struct txdone_entry_desc txdesc; u32 word; u32 reg; @@ -1752,8 +2050,8 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) continue; entry = &queue->entries[index]; - priv_tx = entry->priv_data; - rt2x00_desc_read(priv_tx->desc, 0, &word); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1768,20 +2066,31 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) "TX status report missed for entry %d\n", entry_done->entry_idx); - txdesc.status = TX_FAIL_OTHER; + txdesc.flags = 0; + __set_bit(TXDONE_UNKNOWN, &txdesc.flags); txdesc.retry = 0; - rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + rt2x00lib_txdone(entry_done, &txdesc); entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } /* * Obtain the status about this packet. */ - txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); + txdesc.flags = 0; + switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) { + case 0: /* Success, maybe with retry */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + break; + case 6: /* Failure, excessive retries */ + __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); + /* Don't break, this is a failed frame! */ + default: /* Failure */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + } txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1804,7 +2113,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) if (!reg && !reg_mcu) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -1967,7 +2276,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * To determine the RT chip we have to read the * PCI header of the device. */ - pci_read_config_word(rt2x00dev_pci(rt2x00dev), + pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_CONFIG_HEADER_DEVICE, &device); value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); @@ -2004,10 +2313,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Detect if this device has an hardware controlled radio. */ -#ifdef CONFIG_RT61PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT61PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ /* * Read frequency offset and RF programming sequence. @@ -2065,35 +2374,15 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * If the eeprom value is invalid, * switch to default led mode. */ -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; - rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; - rt2x00dev->led_assoc.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_assoc.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_assoc.flags = LED_INITIALIZED; - - if (value == LED_MODE_SIGNAL_STRENGTH) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_QUALITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + if (value == LED_MODE_SIGNAL_STRENGTH) + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_QUALITY); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, @@ -2119,7 +2408,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); -#endif /* CONFIG_RT61PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ return 0; } @@ -2238,43 +2527,31 @@ static const struct rf_channel rf_vals_seq[] = { { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, }; -static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 4; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { spec->num_channels = 14; @@ -2288,13 +2565,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(&rt2x00dev->chip, RF5325)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_seq); + } - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); - spec->tx_power_a = txpower; + if (spec->num_channels > 14) { + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); } + + return 0; } static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -2315,12 +2607,17 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt61pci_probe_hw_mode(rt2x00dev); + retval = rt61pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* - * This device requires firmware. + * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2347,81 +2644,77 @@ static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, return 0; } -static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) +static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; u32 reg; - rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); - tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); - tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; - return tsf; -} + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); -static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct queue_entry_priv_pci_tx *priv_tx; - struct skb_frame_desc *skbdesc; - unsigned int beacon_base; - u32 reg; + /* Update WMM TXOP register */ + if (queue_idx < 2) { + field.bit_offset = queue_idx * 16; + field.bit_mask = 0xffff << field.bit_offset; - if (unlikely(!intf->beacon)) - return -ENOBUFS; + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + } else if (queue_idx < 4) { + field.bit_offset = (queue_idx - 2) * 16; + field.bit_mask = 0xffff << field.bit_offset; - priv_tx = intf->beacon->priv_data; - memset(priv_tx->desc, 0, intf->beacon->queue->desc_size); + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + } - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data; - skbdesc->data_len = skb->len; - skbdesc->desc = priv_tx->desc; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg); - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); + rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg); - /* - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, - skbdesc->desc, skbdesc->desc_len); - rt2x00pci_register_multiwrite(rt2x00dev, - beacon_base + skbdesc->desc_len, - skbdesc->data, skbdesc->data_len); - rt61pci_kick_tx_queue(rt2x00dev, control->queue); + rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg); return 0; } +static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); + tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; + rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); + tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); + + return tsf; +} + static const struct ieee80211_ops rt61pci_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -2431,13 +2724,13 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, + .conf_tx = rt61pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, - .beacon_update = rt61pci_beacon_update, }; static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { @@ -2457,8 +2750,11 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .link_tuner = rt61pci_link_tuner, .write_tx_desc = rt61pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, + .config_shared_key = rt61pci_config_shared_key, + .config_pairwise_key = rt61pci_config_pairwise_key, .config_filter = rt61pci_config_filter, .config_intf = rt61pci_config_intf, .config_erp = rt61pci_config_erp, @@ -2469,21 +2765,21 @@ static const struct data_queue_desc rt61pci_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_rx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt61pci_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt61pci_queue_bcn = { .entry_num = 4 * BEACON_ENTRIES, .data_size = 0, /* No DMA required for beacons */ .desc_size = TXINFO_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct rt2x00_ops rt61pci_ops = { @@ -2492,6 +2788,7 @@ static const struct rt2x00_ops rt61pci_ops = { .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt61pci_queue_rx, .tx = &rt61pci_queue_tx, .bcn = &rt61pci_queue_bcn, |