summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt61pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c829
1 files changed, 425 insertions, 404 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index ad2e7d53b3d..468a31c8c11 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1,5 +1,5 @@
/*
- Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
@@ -24,6 +24,7 @@
Supported chipsets: RT2561, RT2561s, RT2661.
*/
+#include <linux/crc-itu-t.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
@@ -155,6 +156,12 @@ rf_write:
rt2x00_rf_write(rt2x00dev, word, value);
}
+#ifdef CONFIG_RT61PCI_LEDS
+/*
+ * This function is only called from rt61pci_led_brightness()
+ * make gcc happy by placing this function inside the
+ * same ifdef statement as the caller.
+ */
static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
@@ -181,6 +188,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
}
+#endif /* CONFIG_RT61PCI_LEDS */
static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
@@ -262,82 +270,162 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
+ return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
}
#else
#define rt61pci_rfkill_poll NULL
#endif /* CONFIG_RT61PCI_RFKILL */
-/*
- * Configuration handlers.
- */
-static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac)
+#ifdef CONFIG_RT61PCI_LEDS
+static void rt61pci_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
{
- u32 tmp;
-
- tmp = le32_to_cpu(mac[1]);
- rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
- mac[1] = cpu_to_le32(tmp);
-
- rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
- (2 * sizeof(__le32)));
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int a_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+ unsigned int bg_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_RADIO_STATUS, enabled);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_BG_STATUS, bg_mode);
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_A_STATUS, a_mode);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * this means we need to convert the brightness
+ * argument into the matching level within that range.
+ */
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ brightness / (LED_FULL / 6), 0);
+ }
}
-static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid)
+static int rt61pci_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
{
- u32 tmp;
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ u32 reg;
- tmp = le32_to_cpu(bssid[1]);
- rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
- bssid[1] = cpu_to_le32(tmp);
+ rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, &reg);
+ rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
+ rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
+ rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg);
- rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid,
- (2 * sizeof(__le32)));
+ return 0;
}
+#endif /* CONFIG_RT61PCI_LEDS */
-static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type,
- const int tsf_sync)
+/*
+ * Configuration handlers.
+ */
+static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags)
{
u32 reg;
/*
- * Clear current synchronisation setup.
- * For the Beacon base registers we only need to clear
- * the first byte since that byte contains the VALID and OWNER
- * bits which (when set to 0) will invalidate the entire beacon.
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
*/
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
- rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
+ !(filter_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
+ !(filter_flags & FIF_PROMISC_IN_BSS) &&
+ !rt2x00dev->intf_ap_count);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
+}
- /*
- * Enable synchronisation.
- */
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
- rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE,
- (tsf_sync == TSF_SYNC_BEACON));
- rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
- rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, tsf_sync);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_intf *intf,
+ struct rt2x00intf_conf *conf,
+ const unsigned int flags)
+{
+ unsigned int beacon_base;
+ u32 reg;
+
+ if (flags & CONFIG_UPDATE_TYPE) {
+ /*
+ * Clear current synchronisation setup.
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+ rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
+
+ /*
+ * Enable synchronisation.
+ */
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+ }
+
+ if (flags & CONFIG_UPDATE_MAC) {
+ reg = le32_to_cpu(conf->mac[1]);
+ rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
+ conf->mac[1] = cpu_to_le32(reg);
+
+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
+ conf->mac, sizeof(conf->mac));
+ }
+
+ if (flags & CONFIG_UPDATE_BSSID) {
+ reg = le32_to_cpu(conf->bssid[1]);
+ rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
+ conf->bssid[1] = cpu_to_le32(reg);
+
+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
+ conf->bssid, sizeof(conf->bssid));
+ }
}
-static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev,
- const int short_preamble,
- const int ack_timeout,
- const int ack_consume_time)
+static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_erp *erp)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
- rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
+ rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
- !!short_preamble);
+ !!erp->short_preamble);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
}
@@ -427,27 +515,21 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- (rt2x00dev->curr_hwmode != HWMODE_A));
+ (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
- if (rt2x00dev->curr_hwmode == HWMODE_A)
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
else
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
- case ANTENNA_SW_DIVERSITY:
- /*
- * NOTE: We should never come here because rt2x00lib is
- * supposed to catch this and send us the correct antenna
- * explicitely. However we are nog going to bug about this.
- * Instead, just default to antenna B.
- */
case ANTENNA_B:
+ default:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
- if (rt2x00dev->curr_hwmode == HWMODE_A)
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
else
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
@@ -486,14 +568,8 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
- case ANTENNA_SW_DIVERSITY:
- /*
- * NOTE: We should never come here because rt2x00lib is
- * supposed to catch this and send us the correct antenna
- * explicitely. However we are nog going to bug about this.
- * Instead, just default to antenna B.
- */
case ANTENNA_B:
+ default:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
@@ -531,10 +607,6 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
- /* FIXME: Antenna selection for the rf 2529 is very confusing in the
- * legacy driver. The code below should be ok for non-diversity setups.
- */
-
/*
* Configure the RX antenna.
*/
@@ -544,15 +616,14 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
break;
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
/*
- * NOTE: We should never come here because rt2x00lib is
- * supposed to catch this and send us the correct antenna
- * explicitely. However we are nog going to bug about this.
- * Instead, just default to antenna B.
+ * FIXME: Antenna selection for the rf 2529 is very confusing
+ * in the legacy driver. Just default to antenna B until the
+ * legacy code can be properly translated into rt2x00 code.
*/
case ANTENNA_B:
+ default:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
@@ -603,7 +674,14 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
unsigned int i;
u32 reg;
- if (rt2x00dev->curr_hwmode == HWMODE_A) {
+ /*
+ * We should never come here because rt2x00lib is supposed
+ * to catch this and send us the correct antenna explicitely.
+ */
+ BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
+ ant->tx == ANTENNA_SW_DIVERSITY);
+
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
} else {
@@ -617,10 +695,9 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
- (rt2x00dev->curr_hwmode == HWMODE_B ||
- rt2x00dev->curr_hwmode == HWMODE_G));
+ rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
- (rt2x00dev->curr_hwmode == HWMODE_A));
+ rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
@@ -667,8 +744,8 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
}
static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
- const unsigned int flags,
- struct rt2x00lib_conf *libconf)
+ struct rt2x00lib_conf *libconf,
+ const unsigned int flags)
{
if (flags & CONFIG_UPDATE_PHYMODE)
rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
@@ -684,78 +761,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
}
/*
- * LED functions.
- */
-static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- u8 arg0;
- u8 arg1;
-
- rt2x00pci_register_read(rt2x00dev, MAC_CSR14, &reg);
- rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
- rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
- rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
-
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
- (rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
- (rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
-
- arg0 = rt2x00dev->led_reg & 0xff;
- arg1 = (rt2x00dev->led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u16 led_reg;
- u8 arg0;
- u8 arg1;
-
- led_reg = rt2x00dev->led_reg;
- rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
-
- arg0 = led_reg & 0xff;
- arg1 = (led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
-{
- u8 led;
-
- if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
- return;
-
- /*
- * Led handling requires a positive value for the rssi,
- * to do that correctly we need to add the correction.
- */
- rssi += rt2x00dev->rssi_offset;
-
- if (rssi <= 30)
- led = 0;
- else if (rssi <= 39)
- led = 1;
- else if (rssi <= 49)
- led = 2;
- else if (rssi <= 53)
- led = 3;
- else if (rssi <= 63)
- led = 4;
- else
- led = 5;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
-}
-
-/*
* Link tuning
*/
static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
@@ -789,17 +794,12 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
u8 up_bound;
u8 low_bound;
- /*
- * Update Led strength
- */
- rt61pci_activity_led(rt2x00dev, rssi);
-
rt61pci_bbp_read(rt2x00dev, 17, &r17);
/*
* Determine r17 bounds.
*/
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
+ if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
low_bound = 0x28;
up_bound = 0x48;
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
@@ -816,6 +816,13 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
}
/*
+ * If we are not associated, we should go straight to the
+ * dynamic CCA tuning.
+ */
+ if (!rt2x00dev->intf_associated)
+ goto dynamic_cca_tune;
+
+ /*
* Special big-R17 for very short distance
*/
if (rssi >= -35) {
@@ -866,6 +873,8 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
return;
}
+dynamic_cca_tune:
+
/*
* r17 does not yet exceed upper limit, continue and base
* the r17 tuning on the false CCA count.
@@ -882,7 +891,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
}
/*
- * Firmware name function.
+ * Firmware functions
*/
static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
@@ -906,9 +915,23 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
return fw_name;
}
-/*
- * Initialization functions.
- */
+static u16 rt61pci_get_firmware_crc(void *data, const size_t len)
+{
+ u16 crc;
+
+ /*
+ * Use the crc itu-t algorithm.
+ * The last 2 bytes in the firmware array are the crc checksum itself,
+ * this means that we should never pass those 2 bytes to the crc
+ * algorithm.
+ */
+ crc = crc_itu_t(0, data, len - 2);
+ crc = crc_itu_t_byte(crc, 0);
+ crc = crc_itu_t_byte(crc, 0);
+
+ return crc;
+}
+
static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
const size_t len)
{
@@ -989,50 +1012,55 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
return 0;
}
+/*
+ * Initialization functions.
+ */
static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
- struct data_entry *entry)
+ struct queue_entry *entry)
{
- __le32 *rxd = entry->priv;
+ struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
u32 word;
- rt2x00_desc_read(rxd, 5, &word);
+ rt2x00_desc_read(priv_rx->desc, 5, &word);
rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
- entry->data_dma);
- rt2x00_desc_write(rxd, 5, word);
+ priv_rx->data_dma);
+ rt2x00_desc_write(priv_rx->desc, 5, word);
- rt2x00_desc_read(rxd, 0, &word);
+ rt2x00_desc_read(priv_rx->desc, 0, &word);
rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
- rt2x00_desc_write(rxd, 0, word);
+ rt2x00_desc_write(priv_rx->desc, 0, word);
}
static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev,
- struct data_entry *entry)
+ struct queue_entry *entry)
{
- __le32 *txd = entry->priv;
+ struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
u32 word;
- rt2x00_desc_read(txd, 1, &word);
+ rt2x00_desc_read(priv_tx->desc, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
- rt2x00_desc_write(txd, 1, word);
+ rt2x00_desc_write(priv_tx->desc, 1, word);
- rt2x00_desc_read(txd, 5, &word);
- rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->ring->queue_idx);
+ rt2x00_desc_read(priv_tx->desc, 5, &word);
+ rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
- rt2x00_desc_write(txd, 5, word);
+ rt2x00_desc_write(priv_tx->desc, 5, word);
- rt2x00_desc_read(txd, 6, &word);
+ rt2x00_desc_read(priv_tx->desc, 6, &word);
rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
- entry->data_dma);
- rt2x00_desc_write(txd, 6, word);
+ priv_tx->data_dma);
+ rt2x00_desc_write(priv_tx->desc, 6, word);
- rt2x00_desc_read(txd, 0, &word);
+ rt2x00_desc_read(priv_tx->desc, 0, &word);
rt2x00_set_field32(&word, TXD_W0_VALID, 0);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
- rt2x00_desc_write(txd, 0, word);
+ rt2x00_desc_write(priv_tx->desc, 0, word);
}
-static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
{
+ struct queue_entry_priv_pci_rx *priv_rx;
+ struct queue_entry_priv_pci_tx *priv_tx;
u32 reg;
/*
@@ -1040,59 +1068,55 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
*/
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
+ rt2x00dev->tx[0].limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
+ rt2x00dev->tx[1].limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit);
+ rt2x00dev->tx[2].limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit);
+ rt2x00dev->tx[3].limit);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
- rt2x00_set_field32(&reg, TX_RING_CSR1_MGMT_RING_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit);
rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size /
- 4);
+ rt2x00dev->tx[0].desc_size / 4);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
+ priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
+ priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
+ priv_tx = rt2x00dev->tx[2].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma);
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
+ priv_tx = rt2x00dev->tx[3].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma);
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
- rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, &reg);
- rt2x00_set_field32(&reg, MGMT_BASE_CSR_RING_REGISTER,
- rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma);
- rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg);
-
rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
- rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE,
- rt2x00dev->rx->stats.limit);
+ rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
rt2x00dev->rx->desc_size / 4);
rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
+ priv_rx = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
- rt2x00dev->rx->data_dma);
+ priv_rx->desc_dma);
rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
@@ -1100,7 +1124,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
- rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_MGMT, 0);
rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
@@ -1108,7 +1131,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
- rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
@@ -1224,6 +1246,17 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
/*
+ * Clear all beacons
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+
+ /*
* We must clear the error counters.
* These registers are cleared on read,
* so we may pass a useless variable to store the value.
@@ -1296,19 +1329,15 @@ continue_csr_init:
rt61pci_bbp_write(rt2x00dev, 102, 0x16);
rt61pci_bbp_write(rt2x00dev, 107, 0x04);
- DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
if (eeprom != 0xffff && eeprom != 0x0000) {
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
- DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
- reg_id, value);
rt61pci_bbp_write(rt2x00dev, reg_id, value);
}
}
- DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
return 0;
}
@@ -1375,7 +1404,7 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Initialize all registers.
*/
- if (rt61pci_init_rings(rt2x00dev) ||
+ if (rt61pci_init_queues(rt2x00dev) ||
rt61pci_init_registers(rt2x00dev) ||
rt61pci_init_bbp(rt2x00dev)) {
ERROR(rt2x00dev, "Register initialization failed.\n");
@@ -1394,11 +1423,6 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
- /*
- * Enable LED
- */
- rt61pci_enable_led(rt2x00dev);
-
return 0;
}
@@ -1406,11 +1430,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
- /*
- * Disable LED
- */
- rt61pci_disable_led(rt2x00dev);
-
rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
/*
@@ -1426,7 +1445,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
- rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
/*
@@ -1508,10 +1526,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
- struct txdata_entry_desc *desc,
+ struct txentry_desc *txdesc,
struct ieee80211_tx_control *control)
{
- struct skb_desc *skbdesc = get_skb_desc(skb);
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
u32 word;
@@ -1519,50 +1537,52 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
* Start writing the descriptor words.
*/
rt2x00_desc_read(txd, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
- rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
- rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
- rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
+ rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
+ rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
+ rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
+ rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
- rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
- rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
- rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
- rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- TXPOWER_TO_DEV(control->power_level));
+ TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
- rt2x00_desc_read(txd, 11, &word);
- rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len);
- rt2x00_desc_write(txd, 11, word);
+ if (skbdesc->desc_len > TXINFO_SIZE) {
+ rt2x00_desc_read(txd, 11, &word);
+ rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len);
+ rt2x00_desc_write(txd, 11, word);
+ }
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
rt2x00_set_field32(&word, TXD_W0_VALID, 1);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_ACK,
- test_bit(ENTRY_TXD_ACK, &desc->flags));
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_OFDM,
- test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
- rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
+ test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
!!(control->flags &
IEEE80211_TXCTL_LONG_RETRY_LIMIT));
rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
rt2x00_set_field32(&word, TXD_W0_BURST,
- test_bit(ENTRY_TXD_BURST, &desc->flags));
+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
@@ -1571,11 +1591,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
* TX data initialization
*/
static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u32 reg;
- if (queue == IEEE80211_TX_QUEUE_BEACON) {
+ if (queue == RT2X00_BCN_QUEUE_BEACON) {
/*
* For Wi-Fi faily generated beacons between participating
* stations. Set TBTT phase adaptive adjustment step to 8us.
@@ -1584,6 +1604,8 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
+ rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
@@ -1599,8 +1621,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
(queue == IEEE80211_TX_QUEUE_DATA2));
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3,
(queue == IEEE80211_TX_QUEUE_DATA3));
- rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_MGMT,
- (queue == IEEE80211_TX_QUEUE_DATA4));
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
}
@@ -1628,7 +1648,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return 0;
}
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
+ if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
offset += 14;
@@ -1648,28 +1668,35 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}
-static void rt61pci_fill_rxdone(struct data_entry *entry,
- struct rxdata_entry_desc *desc)
+static void rt61pci_fill_rxdone(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
{
- __le32 *rxd = entry->priv;
+ struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
u32 word0;
u32 word1;
- rt2x00_desc_read(rxd, 0, &word0);
- rt2x00_desc_read(rxd, 1, &word1);
+ rt2x00_desc_read(priv_rx->desc, 0, &word0);
+ rt2x00_desc_read(priv_rx->desc, 1, &word1);
- desc->flags = 0;
+ rxdesc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
- desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
/*
* Obtain the status about this packet.
- */
- desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
- desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
+ */
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+ rxdesc->dev_flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_OFDM))
+ rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
+ rxdesc->dev_flags |= RXDONE_MY_BSS;
}
/*
@@ -1677,17 +1704,16 @@ static void rt61pci_fill_rxdone(struct data_entry *entry,
*/
static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
{
- struct data_ring *ring;
- struct data_entry *entry;
- struct data_entry *entry_done;
- __le32 *txd;
+ struct data_queue *queue;
+ struct queue_entry *entry;
+ struct queue_entry *entry_done;
+ struct queue_entry_priv_pci_tx *priv_tx;
+ struct txdone_entry_desc txdesc;
u32 word;
u32 reg;
u32 old_reg;
int type;
int index;
- int tx_status;
- int retry;
/*
* During each loop we will compare the freshly read
@@ -1710,11 +1736,11 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
/*
* Skip this entry when it contains an invalid
- * ring identication number.
+ * queue identication number.
*/
type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
- ring = rt2x00lib_get_ring(rt2x00dev, type);
- if (unlikely(!ring))
+ queue = rt2x00queue_get_queue(rt2x00dev, type);
+ if (unlikely(!queue))
continue;
/*
@@ -1722,36 +1748,40 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
* index number.
*/
index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
- if (unlikely(index >= ring->stats.limit))
+ if (unlikely(index >= queue->limit))
continue;
- entry = &ring->entry[index];
- txd = entry->priv;
- rt2x00_desc_read(txd, 0, &word);
+ entry = &queue->entries[index];
+ priv_tx = entry->priv_data;
+ rt2x00_desc_read(priv_tx->desc, 0, &word);
if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
!rt2x00_get_field32(word, TXD_W0_VALID))
return;
- entry_done = rt2x00_get_data_entry_done(ring);
+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
while (entry != entry_done) {
- /* Catch up. Just report any entries we missed as
- * failed. */
+ /* Catch up.
+ * Just report any entries we missed as failed.
+ */
WARNING(rt2x00dev,
- "TX status report missed for entry %p\n",
- entry_done);
- rt2x00pci_txdone(rt2x00dev, entry_done, TX_FAIL_OTHER,
- 0);
- entry_done = rt2x00_get_data_entry_done(ring);
+ "TX status report missed for entry %d\n",
+ entry_done->entry_idx);
+
+ txdesc.status = TX_FAIL_OTHER;
+ txdesc.retry = 0;
+
+ rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc);
+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
}
/*
* Obtain the status about this packet.
*/
- tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
- retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
+ txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
+ txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
- rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry);
+ rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
}
}
@@ -1906,7 +1936,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
- EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
+ EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
} else {
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
if (value < -10 || value > 10)
@@ -2035,35 +2065,61 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* If the eeprom value is invalid,
* switch to default led mode.
*/
+#ifdef CONFIG_RT61PCI_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
+
+ rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
+ rt2x00dev->led_radio.type = LED_TYPE_RADIO;
+ rt2x00dev->led_radio.led_dev.brightness_set =
+ rt61pci_brightness_set;
+ rt2x00dev->led_radio.led_dev.blink_set =
+ rt61pci_blink_set;
+ rt2x00dev->led_radio.flags = LED_INITIALIZED;
+
+ rt2x00dev->led_assoc.rt2x00dev = rt2x00dev;
+ rt2x00dev->led_assoc.type = LED_TYPE_ASSOC;
+ rt2x00dev->led_assoc.led_dev.brightness_set =
+ rt61pci_brightness_set;
+ rt2x00dev->led_assoc.led_dev.blink_set =
+ rt61pci_blink_set;
+ rt2x00dev->led_assoc.flags = LED_INITIALIZED;
+
+ if (value == LED_MODE_SIGNAL_STRENGTH) {
+ rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
+ rt2x00dev->led_radio.type = LED_TYPE_QUALITY;
+ rt2x00dev->led_qual.led_dev.brightness_set =
+ rt61pci_brightness_set;
+ rt2x00dev->led_qual.led_dev.blink_set =
+ rt61pci_blink_set;
+ rt2x00dev->led_qual.flags = LED_INITIALIZED;
+ }
- rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
-
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
- rt2x00dev->led_mode);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_0));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_1));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_2));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_3));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_4));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_G));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
+#endif /* CONFIG_RT61PCI_LEDS */
return 0;
}
@@ -2197,7 +2253,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00dev->hw->extra_tx_headroom = 0;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
- rt2x00dev->hw->queues = 5;
+ rt2x00dev->hw->queues = 4;
SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2214,8 +2270,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -2230,7 +2286,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- spec->num_modes = 3;
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
@@ -2262,7 +2318,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
rt61pci_probe_hw_mode(rt2x00dev);
/*
- * This device requires firmware
+ * This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
@@ -2277,70 +2333,6 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
-static void rt61pci_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mc_list)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- u32 reg;
-
- /*
- * Mask off any flags we are going to ignore from
- * the total_flags field.
- */
- *total_flags &=
- FIF_ALLMULTI |
- FIF_FCSFAIL |
- FIF_PLCPFAIL |
- FIF_CONTROL |
- FIF_OTHER_BSS |
- FIF_PROMISC_IN_BSS;
-
- /*
- * Apply some rules to the filters:
- * - Some filters imply different filters to be set.
- * - Some things we can't filter out at all.
- * - Multicast filter seems to kill broadcast traffic so never use it.
- */
- *total_flags |= FIF_ALLMULTI;
- if (*total_flags & FIF_OTHER_BSS ||
- *total_flags & FIF_PROMISC_IN_BSS)
- *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
-
- /*
- * Check if there is any work left for us.
- */
- if (rt2x00dev->packet_filter == *total_flags)
- return;
- rt2x00dev->packet_filter = *total_flags;
-
- /*
- * Start configuration steps.
- * Note that the version error will always be dropped
- * and broadcast frames will always be accepted since
- * there is no filter for it at this time.
- */
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
- !(*total_flags & FIF_FCSFAIL));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
- !(*total_flags & FIF_PLCPFAIL));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
- !(*total_flags & FIF_CONTROL));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
- !(*total_flags & FIF_PROMISC_IN_BSS));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
- !(*total_flags & FIF_PROMISC_IN_BSS));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
- !(*total_flags & FIF_ALLMULTI));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, 0);
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
@@ -2369,66 +2361,72 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
return tsf;
}
-static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
-}
-
static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- struct skb_desc *desc;
- struct data_ring *ring;
- struct data_entry *entry;
+ struct rt2x00_intf *intf = vif_to_intf(control->vif);
+ struct skb_frame_desc *skbdesc;
+ unsigned int beacon_base;
+ u32 reg;
- /*
- * Just in case the ieee80211 doesn't set this,
- * but we need this queue set for the descriptor
- * initialization.
- */
- control->queue = IEEE80211_TX_QUEUE_BEACON;
- ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
- entry = rt2x00_get_data_entry(ring);
+ if (unlikely(!intf->beacon))
+ return -ENOBUFS;
/*
* We need to append the descriptor in front of the
* beacon frame.
*/
- if (skb_headroom(skb) < TXD_DESC_SIZE) {
- if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC))
+ if (skb_headroom(skb) < intf->beacon->queue->desc_size) {
+ if (pskb_expand_head(skb, intf->beacon->queue->desc_size,
+ 0, GFP_ATOMIC))
return -ENOMEM;
}
/*
* Add the descriptor in front of the skb.
*/
- skb_push(skb, ring->desc_size);
- memset(skb->data, 0, ring->desc_size);
+ skb_push(skb, intf->beacon->queue->desc_size);
+ memset(skb->data, 0, intf->beacon->queue->desc_size);
/*
* Fill in skb descriptor
*/
- desc = get_skb_desc(skb);
- desc->desc_len = ring->desc_size;
- desc->data_len = skb->len - ring->desc_size;
- desc->desc = skb->data;
- desc->data = skb->data + ring->desc_size;
- desc->ring = ring;
- desc->entry = entry;
+ skbdesc = get_skb_frame_desc(skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
+ skbdesc->data = skb->data + intf->beacon->queue->desc_size;
+ skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
+ skbdesc->desc = skb->data;
+ skbdesc->desc_len = intf->beacon->queue->desc_size;
+ skbdesc->entry = intf->beacon;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+ rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+ rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+ /*
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
+ */
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
* Write entire beacon with descriptor to register,
* and kick the beacon generator.
*/
- rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0,
+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
skb->data, skb->len);
- rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+ rt61pci_kick_tx_queue(rt2x00dev, control->queue);
return 0;
}
@@ -2441,14 +2439,13 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .configure_filter = rt61pci_configure_filter,
+ .configure_filter = rt2x00mac_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
- .reset_tsf = rt61pci_reset_tsf,
.beacon_update = rt61pci_beacon_update,
};
@@ -2456,6 +2453,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
+ .get_firmware_crc = rt61pci_get_firmware_crc,
.load_firmware = rt61pci_load_firmware,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
@@ -2470,19 +2468,42 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.write_tx_data = rt2x00pci_write_tx_data,
.kick_tx_queue = rt61pci_kick_tx_queue,
.fill_rxdone = rt61pci_fill_rxdone,
- .config_mac_addr = rt61pci_config_mac_addr,
- .config_bssid = rt61pci_config_bssid,
- .config_type = rt61pci_config_type,
- .config_preamble = rt61pci_config_preamble,
+ .config_filter = rt61pci_config_filter,
+ .config_intf = rt61pci_config_intf,
+ .config_erp = rt61pci_config_erp,
.config = rt61pci_config,
};
+static const struct data_queue_desc rt61pci_queue_rx = {
+ .entry_num = RX_ENTRIES,
+ .data_size = DATA_FRAME_SIZE,
+ .desc_size = RXD_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci_rx),
+};
+
+static const struct data_queue_desc rt61pci_queue_tx = {
+ .entry_num = TX_ENTRIES,
+ .data_size = DATA_FRAME_SIZE,
+ .desc_size = TXD_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci_tx),
+};
+
+static const struct data_queue_desc rt61pci_queue_bcn = {
+ .entry_num = 4 * BEACON_ENTRIES,
+ .data_size = MGMT_FRAME_SIZE,
+ .desc_size = TXINFO_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_pci_tx),
+};
+
static const struct rt2x00_ops rt61pci_ops = {
.name = KBUILD_MODNAME,
- .rxd_size = RXD_DESC_SIZE,
- .txd_size = TXD_DESC_SIZE,
+ .max_sta_intf = 1,
+ .max_ap_intf = 4,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
+ .rx = &rt61pci_queue_rx,
+ .tx = &rt61pci_queue_tx,
+ .bcn = &rt61pci_queue_bcn,
.lib = &rt61pci_rt2x00_ops,
.hw = &rt61pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS