1 files changed, 21 insertions, 27 deletions

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6e0d82efe92..113ad690f9d 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -270,7 +270,6 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 {
 	struct hw_key_entry key_entry;
 	struct rt2x00_field32 field;
-	int timeout;
 	u32 mask;
 	u32 reg;
 
@@ -306,12 +305,8 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		       sizeof(key_entry.rx_mic));
 
 		reg = SHARED_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT, reg,
-						    &key_entry,
-						    sizeof(key_entry),
-						    timeout);
+		rt2x00usb_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
 
 		/*
 		 * The cipher types are stored over 2 registers.
@@ -372,7 +367,6 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 {
 	struct hw_pairwise_ta_entry addr_entry;
 	struct hw_key_entry key_entry;
-	int timeout;
 	u32 mask;
 	u32 reg;
 
@@ -407,17 +401,11 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		       sizeof(key_entry.rx_mic));
 
 		reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT, reg,
-						    &key_entry,
-						    sizeof(key_entry),
-						    timeout);
+		rt2x00usb_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
 
 		/*
 		 * Send the address and cipher type to the hardware register.
-		 * This data fits within the CSR cache size, so we can use
-		 * rt2x00usb_register_multiwrite() directly.
 		 */
 		memset(&addr_entry, 0, sizeof(addr_entry));
 		memcpy(&addr_entry, crypto->address, ETH_ALEN);
@@ -1092,11 +1080,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT,
-					    FIRMWARE_IMAGE_BASE,
-					    data, len,
-					    REGISTER_TIMEOUT32(len));
+	rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len);
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1442,7 +1426,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				  struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	__le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE);
+	__le32 *txd = (__le32 *) skb->data;
 	u32 word;
 
 	/*
@@ -1505,6 +1489,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Register descriptor details in skb frame descriptor.
 	 */
+	skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 	skbdesc->desc = txd;
 	skbdesc->desc_len = TXD_DESC_SIZE;
 }
@@ -1528,18 +1513,27 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 
 	/*
-	 * Take the descriptor in front of the skb into account.
+	 * Add space for the descriptor in front of the skb.
 	 */
 	skb_push(entry->skb, TXD_DESC_SIZE);
+	memset(entry->skb->data, 0, TXD_DESC_SIZE);
+
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt73usb_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT, beacon_base,
-					    entry->skb->data, entry->skb->len,
-					    REGISTER_TIMEOUT32(entry->skb->len));
+	rt2x00usb_register_multiwrite(rt2x00dev, beacon_base,
+				      entry->skb->data, entry->skb->len);
 
 	/*
 	 * Enable beaconing again.