summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt73usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt73usb.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c457
1 files changed, 389 insertions, 68 deletions
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 9761eaaa08b..934f8e03c5a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -37,6 +37,13 @@
#include "rt73usb.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* All access to the CSR registers will go through the methods
* rt73usb_register_read and rt73usb_register_write.
@@ -285,7 +292,7 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -352,11 +359,224 @@ static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt73usb_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
*/
+static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR5, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR0, reg);
+
+ return 0;
+}
+
+static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * Send the address and cipher type to the hardware register.
+ * This data fits within the CSR cache size, so we can use
+ * rt73usb_register_multiwrite() directly.
+ */
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt73usb_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR4, &reg);
+ reg |= (1 << crypto->bssidx);
+ rt73usb_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
@@ -451,6 +671,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
@@ -705,6 +945,9 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt73usb_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
@@ -1034,16 +1277,6 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
- rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
- rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
- rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
- rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-
rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -1265,8 +1498,8 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
* TX descriptor initialization
*/
static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct txentry_desc *txdesc)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
@@ -1280,7 +1513,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
@@ -1292,6 +1525,11 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
TXPOWER_TO_DEV(rt2x00dev->tx_power));
@@ -1313,12 +1551,15 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
- skb->len - skbdesc->desc_len);
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_BURST2,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
@@ -1331,7 +1572,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
- u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1341,17 +1581,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
skbdesc->desc = entry->skb->data;
/*
- * Adjust the beacon databyte count. The current number is
- * calculated before this function gets called, but falsely
- * assumes that the descriptor was already present in the SKB.
- */
- rt2x00_desc_read(skbdesc->desc, 0, &word);
- len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
- len += skbdesc->desc_len;
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
- rt2x00_desc_write(skbdesc->desc, 0, word);
-
- /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1422,20 +1651,19 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
*/
static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
@@ -1451,15 +1679,6 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
else if (lna == 2)
offset += 8;
}
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
@@ -1468,6 +1687,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
static void rt73usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd = (__le32 *)entry->skb->data;
u32 word0;
@@ -1489,6 +1709,38 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
+ _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
@@ -1496,11 +1748,13 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
@@ -1678,7 +1932,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led settings, for correct led behaviour.
*/
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
@@ -1711,7 +1965,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
return 0;
}
@@ -1852,10 +2106,11 @@ static const struct rf_channel rf_vals_5225_2527[] = {
};
-static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1872,20 +2127,10 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
@@ -1903,14 +2148,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->channels = rf_vals_5225_2527;
}
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1931,13 +2188,17 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt73usb_probe_hw_mode(rt2x00dev);
+ retval = rt73usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -1964,6 +2225,63 @@ static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
return 0;
}
+static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct data_queue *queue;
+ struct rt2x00_field32 field;
+ int retval;
+ u32 reg;
+
+ /*
+ * First pass the configuration through rt2x00lib, that will
+ * update the queue settings and validate the input. After that
+ * we are free to update the registers based on the value
+ * in the queue parameter.
+ */
+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+ if (retval)
+ return retval;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+ /* Update WMM TXOP register */
+ if (queue_idx < 2) {
+ field.bit_offset = queue_idx * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+ } else if (queue_idx < 4) {
+ field.bit_offset = (queue_idx - 2) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+ }
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AIFSN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->aifs);
+ rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg);
+
+ rt73usb_register_read(rt2x00dev, CWMIN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_min);
+ rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+ rt73usb_register_read(rt2x00dev, CWMAX_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_max);
+ rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg);
+
+ return 0;
+}
+
#if 0
/*
* Mac80211 demands get_tsf must be atomic.
@@ -1997,10 +2315,11 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2x00mac_conf_tx,
+ .conf_tx = rt73usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt73usb_get_tsf,
};
@@ -2024,6 +2343,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.get_tx_data_len = rt73usb_get_tx_data_len,
.kick_tx_queue = rt73usb_kick_tx_queue,
.fill_rxdone = rt73usb_fill_rxdone,
+ .config_shared_key = rt73usb_config_shared_key,
+ .config_pairwise_key = rt73usb_config_pairwise_key,
.config_filter = rt73usb_config_filter,
.config_intf = rt73usb_config_intf,
.config_erp = rt73usb_config_erp,