diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt73usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt73usb.c | 699 |
1 files changed, 365 insertions, 334 deletions
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 3909cf42f47..a9efe25f1ea 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -24,6 +24,7 @@ Supported chipsets: rt2571W & rt2671. */ +#include <linux/crc-itu-t.h> #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/init.h> @@ -278,85 +279,158 @@ static const struct rt2x00debug rt73usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -/* - * Configuration handlers. - */ -static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) +#ifdef CONFIG_RT73USB_LEDS +static void rt73usb_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int a_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + + if (led->type == LED_TYPE_RADIO) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_RADIO_STATUS, enabled); + + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + 0, led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } else if (led->type == LED_TYPE_ASSOC) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_BG_STATUS, bg_mode); + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_A_STATUS, a_mode); + + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + 0, led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * this means we need to convert the brightness + * argument into the matching level within that range. + */ + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + brightness / (LED_FULL / 6), + led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } } -static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) +static int rt73usb_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - u32 tmp; + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); + rt73usb_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); + rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); + return 0; } +#endif /* CONFIG_RT73USB_LEDS */ -static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * Enable synchronisation. + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, + !(filter_flags & FIF_CONTROL)); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); } -static void rt73usb_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) { + unsigned int beacon_base; u32 reg; - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work); - return; + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt73usb_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); } + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); + conf->bssid[1] = cpu_to_le32(reg); + + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, + conf->bssid, sizeof(conf->bssid)); + } +} + +static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) +{ + u32 reg; + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); + !!erp->short_preamble); rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); } @@ -442,28 +516,22 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags) - && (rt2x00dev->curr_hwmode != HWMODE_A); + && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); @@ -501,14 +569,8 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); break; @@ -558,7 +620,14 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, unsigned int i; u32 reg; - if (rt2x00dev->curr_hwmode == HWMODE_A) { + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); } else { @@ -572,10 +641,9 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_hwmode == HWMODE_B || - rt2x00dev->curr_hwmode == HWMODE_G)); + (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_hwmode == HWMODE_A)); + (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); @@ -617,8 +685,8 @@ static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt73usb_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); @@ -634,68 +702,6 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt73usb_register_write(rt2x00dev, MAC_CSR14, reg); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, - (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, - (rt2x00dev->rx_status.phymode != MODE_IEEE80211A)); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev) -{ - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u32 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -/* * Link tuning */ static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, @@ -729,17 +735,12 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) u8 up_bound; u8 low_bound; - /* - * Update Led strength - */ - rt73usb_activity_led(rt2x00dev, rssi); - rt73usb_bbp_read(rt2x00dev, 17, &r17); /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; @@ -766,6 +767,13 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Special big-R17 for very short distance */ if (rssi > -35) { @@ -815,6 +823,8 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) return; } +dynamic_cca_tune: + /* * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. @@ -833,16 +843,30 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) } /* - * Firmware name function. + * Firmware functions */ static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) { return FIRMWARE_RT2571; } -/* - * Initialization functions. - */ +static u16 rt73usb_get_firmware_crc(void *data, const size_t len) +{ + u16 crc; + + /* + * Use the crc itu-t algorithm. + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + crc = crc_itu_t(0, data, len - 2); + crc = crc_itu_t_byte(crc, 0); + crc = crc_itu_t_byte(crc, 0); + + return crc; +} + static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, const size_t len) { @@ -889,7 +913,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0x0000, + FIRMWARE_IMAGE_BASE + i, 0, cache, buflen, timeout); ptr += buflen; @@ -902,18 +926,19 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, * we need to specify a long timeout time. */ status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, - 0x0000, USB_MODE_FIRMWARE, + 0, USB_MODE_FIRMWARE, REGISTER_TIMEOUT_FIRMWARE); if (status < 0) { ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); return status; } - rt73usb_disable_led(rt2x00dev); - return 0; } +/* + * Initialization functions. + */ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -1021,6 +1046,17 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -1094,19 +1130,15 @@ continue_csr_init: rt73usb_bbp_write(rt2x00dev, 102, 0x16); rt73usb_bbp_write(rt2x00dev, 107, 0x04); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt73usb_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -1136,21 +1168,11 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) return -EIO; } - /* - * Enable LED - */ - rt73usb_enable_led(rt2x00dev); - return 0; } static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - /* - * Disable LED - */ - rt73usb_disable_led(rt2x00dev); - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* @@ -1234,10 +1256,10 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1245,47 +1267,47 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); + TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); rt2x00_set_field32(&word, TXD_W0_BURST2, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1309,11 +1331,11 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue != IEEE80211_TX_QUEUE_BEACON) + if (queue != RT2X00_BCN_QUEUE_BEACON) return; /* @@ -1324,6 +1346,8 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); } @@ -1353,7 +1377,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { if (lna == 3 || lna == 2) offset += 10; @@ -1377,37 +1401,62 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; } -static void rt73usb_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt73usb_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - struct skb_desc *skbdesc = get_skb_desc(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)entry->skb->data; + unsigned int offset = entry->queue->desc_size + 2; u32 word0; u32 word1; + /* + * Copy descriptor to the available headroom inside the skbuffer. + */ + skb_push(entry->skb, offset); + memcpy(entry->skb->data, rxd, entry->queue->desc_size); + rxd = (__le32 *)entry->skb->data; + + /* + * The descriptor is now aligned to 4 bytes and thus it is + * now safe to read it on all architectures. + */ rt2x00_desc_read(rxd, 0, &word0); rt2x00_desc_read(rxd, 1, &word1); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + /* + * Adjust the skb memory window to the frame boundaries. + */ + skb_pull(entry->skb, offset + entry->queue->desc_size); + skb_trim(entry->skb, rxdesc->size); /* * Set descriptor and data pointer. */ - skbdesc->desc = entry->skb->data; - skbdesc->desc_len = entry->ring->desc_size; - skbdesc->data = entry->skb->data + entry->ring->desc_size; - skbdesc->data_len = desc->size; + skbdesc->data = entry->skb->data; + skbdesc->data_len = rxdesc->size; + skbdesc->desc = rxd; + skbdesc->desc_len = entry->queue->desc_size; } /* @@ -1499,7 +1548,7 @@ static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); } else { value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); if (value < -10 || value > 10) @@ -1577,33 +1626,60 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led settings, for correct led behaviour. */ +#ifdef CONFIG_RT73USB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; + rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; + rt2x00dev->led_assoc.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_assoc.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_assoc.flags = LED_INITIALIZED; + + if (value == LED_MODE_SIGNAL_STRENGTH) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } + + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); +#endif /* CONFIG_RT73USB_LEDS */ return 0; } @@ -1759,7 +1835,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; rt2x00dev->hw->max_signal = MAX_SIGNAL; rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; + rt2x00dev->hw->queues = 4; SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -1776,8 +1852,8 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -1786,20 +1862,20 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); spec->channels = rf_vals_bg_2528; } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5226); spec->channels = rf_vals_5226; } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) { spec->num_channels = 14; spec->channels = rf_vals_5225_2527; } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527); spec->channels = rf_vals_5225_2527; } if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF5226)) { - spec->num_modes = 3; - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); for (i = 0; i < 14; i++) txpower[i] = TXPOWER_FROM_DEV(txpower[i]); @@ -1829,9 +1905,10 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) rt73usb_probe_hw_mode(rt2x00dev); /* - * This device requires firmware + * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1844,79 +1921,6 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt73usb_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Multicast filter seems to kill broadcast traffic so never use it. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); - return; - } - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); -} - static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -1955,61 +1959,65 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) #define rt73usb_get_tsf NULL #endif -static void rt73usb_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0); -} - static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) + struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *entry; - int timeout; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct skb_frame_desc *skbdesc; + unsigned int beacon_base; + unsigned int timeout; + u32 reg; - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - entry = rt2x00_get_data_entry(ring); + if (unlikely(!intf->beacon)) + return -ENOBUFS; /* * Add the descriptor in front of the skb. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = entry; + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - HW_BEACON_BASE0, 0x0000, + USB_VENDOR_REQUEST_OUT, beacon_base, 0, skb->data, skb->len, timeout); - rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt73usb_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -2022,20 +2030,20 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt73usb_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt73usb_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt73usb_get_tsf, - .reset_tsf = rt73usb_reset_tsf, .beacon_update = rt73usb_beacon_update, }; static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .probe_hw = rt73usb_probe_hw, .get_firmware_name = rt73usb_get_firmware_name, + .get_firmware_crc = rt73usb_get_firmware_crc, .load_firmware = rt73usb_load_firmware, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, @@ -2050,19 +2058,42 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, - .config_mac_addr = rt73usb_config_mac_addr, - .config_bssid = rt73usb_config_bssid, - .config_type = rt73usb_config_type, - .config_preamble = rt73usb_config_preamble, + .config_filter = rt73usb_config_filter, + .config_intf = rt73usb_config_intf, + .config_erp = rt73usb_config_erp, .config = rt73usb_config, }; +static const struct data_queue_desc rt73usb_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_rx), +}; + +static const struct data_queue_desc rt73usb_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + +static const struct data_queue_desc rt73usb_queue_bcn = { + .entry_num = 4 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXINFO_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + static const struct rt2x00_ops rt73usb_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt73usb_queue_rx, + .tx = &rt73usb_queue_tx, + .bcn = &rt73usb_queue_bcn, .lib = &rt73usb_rt2x00_ops, .hw = &rt73usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS |